LG | 29FD1RGX | LG 29FD1RGX Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
the back cover and quote this information to your dealer when you require service.
Model number
:
Serial number
:
P/NO
:
3828VA0567A
on
(MC049A, 112P/Q/R/S TX)
b
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Programme edit
Favourite programme
Calling the programme table
Setting
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option) / Picture format
15
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
X-WAVE (Wireless Sound) (option)
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
18
Time
21
setting
Setting the
Auto sleep
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing (option) / Games (option) / Sleep timer
22
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
25
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
26
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
29
Troubleshooting
2
9
check list
31
Installation
Power
This set
supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
operates
on an
AC mains
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
cause
of the set, this may
place anything containing liquid on top
a fire or could give an electric shock.
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
POWER
MUTE
11
1
1
2
3
4
5
6
Remote control handset
Before you use the remote control
teries. See the next page.
2
1.
7
ARC
8
9
0
TV/AV
PICTURE
MENU
12 2.
3
SOUND
4
13
OK
TURBO
VOL
5
VOL
6
PLAY
P/STILL
7
FF
I/II
SSM
PIP
FAVOURITE
NUMBER BUTTONS
switches the set on from
standby
or
directly
TURBO PICTURE / SOUND BUTTON
selects Turbo picture / sound.
5.
D / E
standby.
select
a
number.
(Aspect Ratio Control)
changes the picture format.
(Programme Up/Down)
adjusts
LIST
15
SLEEP
off to
selects a programme or a menu item.
switches the set on from standby.
F / G
(Volume Up/Down)
adjusts the volume.
8
PSM
or
4.
REC
STOP
standby
ARC
PR
REW
from
on
3.
14
PR
POWER
switches the set
handset, please install the bat-
EYE/
16 6.
9
17
Q.VIEW
menu
settings.
VCR BUTTONS (option)
control a LG video cassette recorder.
18
TEXT
10
19 7.
MIX
TIME
REVEAL
? MODE
SIZE
STILL
POSITION
9/4 PIP
PR
PR
SWAP
M
8.
i
INPUT
20
9.
(With
TELETEXT /
FAVOURITE
SSM (Sound Status Memory)
recalls your preferred sound setting.
I/II (option)
selects the language during dual
selects the sound output.
PSM (Picture Status
recalls your preferred
language
broadcast
Memory)
picture setting.
10. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
PIP)
11. MUTE
switches the sound
Q.VIEW
TEXT
on or
off.
10
MIX
TIME
REVEAL
? MODE
SIZE
HOLD
UPDATE
INDEX
12. TV/AV
selects TV or AV mode.
switches the set on from
M
i
13. MENU
selects
standby.
a menu.
14. OK
(With
4
TELETEXT / Without
PIP)
accepts your selection
or
displays
the current mode.
(option).
Location and function of controls
15. LIST
displays
16. EYE/*
the programme table.
(option)
switches the eye function
on or
POWER
off.
11
1
17. SLEEP
sets the
sleep
18. Q.VIEW
returns to the
a
previously
2
3
4
5
6
7
8
9
0
TV/AV
2
viewed programme.
ARC
12
3
favorite programme.
20. PIP BUTTONS
SOUND
PICTURE
(option)
13
TURBO
switches the sub
PR +/selects
a
picture
on or
14
PR
picture.
6
the sub
mode for the sub
picture
picture.
size.
STILL
freezes motion of the sub
PLAY
FF
P/STILL
STOP
REC
I/II
SSM
or
picture
LIST
15
8
PSM
picture.
SLEEP
EYE/
16
9
FAVOURITE
relocates the sub
9/4 PIP
on
REW
7
POSITION
switches
VOL
PR
INPUT
adjusts
VOL
5
picture.
SWAP
alternates between main and sub
input
OK
off.
programme for the sub
selects the
SIZE
MENU
4
PIP
sub
1
timer.
19. FAVOURITE
selects
MUTE
17
Q.VIEW
in clockwise direction.
off the programme
scan
mode
18
19
through
4
or
9
pictures.
COLOURED BUTTONS
These buttons are used for teletext
programme edit.
Battery
(only
TELETEXT
models)
or
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
(Without
PIP
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(Without
TELETEXT /
FAVOURITE
SIZE
STILL
PR
PR
PIP)
Q.VIEW
POSITION
9/4 PIP
SWAP
INPUT
TELETEXT / With
20
PIP)
5
Location and function of controls
Front
panel
25/29FX4 series
7
6
S-VIDEOL/MN
1234
5
8
25/29FX5 series
AUDIO
R
AV3
1234
5
8
25/29FX6 series
AV3
7
6
382
S-VIDEOL/MN
AUDIO
R
Side
1.
2.
panel
1
MAIN POWER (ON/OFF)
switches the set on or off.
6.
brightly
when the set is in
mode.
dims when the set is switched
5.
on.
MENU
a menu.
OK
displays
the current
mode.
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6
7.
HEADPHONE SOCKET
Connect the
(option)
headphone plug to this
socket.
EYE
(option)
adjusts picture according
conditions.
or
to these sockets.
Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in AV3.
8.
accepts your selection
equipment
VCR to the S-VIDEO socket.
REMOTE CONTROL SENSOR
selects
AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of exterS-VIDEO/AUDIO IN SOCKETS (S-AV) (option)
Connect the video out socket of an S-VIDEO
standby
Note : Only use the supplied remote control
handset. (When you use others, they'll be not
able to function.)
4.
5
nal
POWER/STANDBY INDICATOR
illuminates
3.
4
to the
surrounding
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
fully.
Press the POWER button
The set reverts to
4.
standby
the remote control handset.
on
mode.
Press the main power button
again
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
POWER
1
2
3
4
5
6
7
8
9
0
TV/AV
buttons.
Volume
adjustment
Press the F / G button to
MUTE
MENU
SOUND
the volume.
adjust
OK
Quick view
PR
VOL
VOL
Press the Q.VIEW button to view the last programme you
PR
were
watching.
Mute function
Press the MUTE button. The sound is switched off and the
display
W
appears.
You can cancel it
I/II
by pressing
the
MUTE,
F /
SSM
G, SSM, I/II (option),
TURBO SOUND button.
Q.VIEW
On
screen
The
menu
language
can
First select your
1.
selection
be
displayed
language.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
4.
will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
on screen
displays
viewing.
7
On
screen menus
The
dialogue between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
F/GorD/E.
You
to
can move
move
to the
higher
to the lower level
level
menu
or
pull-down
menu
with
with OK or F button and
press the G button.
menu
Note :
In the teletext mode, menus are not displayed.
a.
In some models, the Normal/Turbo search will not display,
b.
only the Start will display in the Auto programme menu.
In some models, Tilt, Game, X-WAVE, Booster or Degauss
c.
will not display.
d. In some models, the Language will not display.
Auto programme
Station
MENU
{
BG
{
System
StorageOfrom
{
I
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
Storage
System
{
2
Channel
{
Search
{
Name
{
Booster
{
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
OK
PR
VOL
VOL
()O}{OOKOMENU
()O}{O OKOMENU
Station
PR
menu
Manual programme
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
{
()O}{O OKOMENU
Picture
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
AVL
{
O1OOCO03OOO6OOSO17
DBS
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
X-WAVE
{
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
TV programme
8
menu
TV
stations
up
Setting
numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Up
to 100 TV stations
Note
:
In
be stored
can
by programme
models up to 200 TV stations
some
Auto programme
can
tuning
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
AutoOprogramme
ManualOprogramme
be stored.
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Station
Press the G button to
display
the Auto programme
menu.
1
2
3
4
5
6
7
8
9
Auto programme
System
StorageOfrom
{
BG
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
0
MENU
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
OK
PR
VOL
VOL
PR
select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
If the programmed station has poor quality sound, select the
b.
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
()O}{O OKOMENU
TV
stations
up
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
programme.
3.
Press the
G
button to
display
the Manual programme
menu.
Manual programme
1
4
7
2
5
8
3
6
Channel
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
MENU
4.
5.
OK
PR
VOL
PR
{
9
0
VOL
Storage
System
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another
17.
10
Repeatedly
viewing.
station, repeat steps
4 to 15.
press the MENU button to return to normal TV
TV
stations
up
Setting
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
1 to 3.
Press the D / E button to select Name.
3.
Press the G button
4.
Press the D button. You
and the
alphabet
on
the Name
can use a
5.
6.
your choice of the second
Press the OK button.
Repeatedly
viewing.
can
In
models, Booster is
can
menu.
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
+, -, the numeric 0 to 9
opposite
()O}{OOKOMENU
direction.
the F / G button and then take
character, and
so on.
press the MENU button to return to normal TV
(option)
Booster
blank,
select in the
pressing
Booster
some
pull-down
AutoOprogramme
ManualOprogramme
A to Z.
With the E button you
Select the position by
7.
Station
perform
an
function.
optional
Only
a
set with
this function.
MENU
If the
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
reception
OK
Booster to On.
PR
VOL
VOL
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
4.
Press the D / E button to select On
1
Repeat
down
or
Off
on
the Booster
PR
pull-
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
press the MENU button to return to normal TV
11
TV
stations
up
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Programme
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
()O}{O OKOMENU
edit
3.
Press the MENU button to select the Station menu.
Press the G button and then D
button to select
/ E
Programme edit.
Press the G button to display the Programme edit menu.
Programme
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
1
2
O2OOCO12OOO7OOSO22
3
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
4
5
6
DeleteOOOCopy
7
8
MoveOOOOOSkip
9
()}{O OKOMENU
0
Deleting
MENU
1.
2.
PR
VOL
VOL
PR
a
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
a
or
F / G button.
one
position.
programme
F / G button.
2.
Select a programme to be moved with the D / E
Press the YELLOW button.
3.
Move the programme to the desired programme number with
1.
or
theD/EorF/Gbutton.
4.
Press the YELLOW button
Programme
again
to release this function.
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
Skipping
1.
Select a
button.
2.
Press the BLUE button. The
3.
with the D / E
skipped
or
F / G
skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons
or
Repeatedly
12
programme number
programme number to be
a
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
Setting
TV
stations
up
Station
Favourite programme
This function lets you select your favorite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
menu.
()O}{OOKOMENU
programme.
3.
Press the G button to
display the Favourite programme
menu.
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
56n Ca 05
{
{
1
2
3
4
5
6
7
8
9
}{O0_9O()OOKOMENU
0
4.
5.
Press the D / E button to select
-----.
Select a desired programme with the F / G button
--
buttons. Any number under 10 is entered with
front of it, i.e. '05' for 5.
6.
7.
8.
To store another programme, repeat
You can store up to 8 programmes.
steps
a
NUMBER
numeric '0' in
Repeatedly
OK
4 to 5.
Press the OK button.
Repeatedly
viewing.
MENU
or
press the MENU button to return to normal TV
PR
VOL
VOL
PR
press the FAVOURITE button to select stored favourite
programmes.
LIST
FAVOURITE
13
TV
stations
up
Setting
the programme table
Calling
You
check the programmes stored in the memory
the programme table.
can
programme table
Press the LIST button to display the
by displaying
Displaying
Programme
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Programme
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{O OKOMENUOOLIST
Note
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
OK
b.
PR
:
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
VOL
VOL
programme in the programme table
programme with the D / E or F / G button.
Selecting
PR
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
LIST
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
FAVOURITE
Press the LIST button to return to normal TV
14
viewing.
Picture
Note: Picture
menu
options
PSM (Picture Status
are
adjustment
not available for RGB
input source.
Memory)
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button to select PSM.
Press the G button and then D / E button to select
setting on the PSM pull-down menu.
3.
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
a
picture
Picture
PSM
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
()O}OOKOMENU
4.
Press the OK
5.
Repeatedly
viewing.
or
F button.
press the MENU button to return to normal TV
MENU
OK
You
can
also recall
a
desired
picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for
good picture reproduction
Picture
You
2.
factory
and cannot be
VOL
VOL
changed.
PR
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
1.
at the
PR
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
FAVOURITE
Picture
PSM
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
100
()O}{OOKOMENU
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
some
models, the
set will
Press the EYE/* button to switch the eye function
on or
off.
Off
ARC
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
PICTURE
At this time the
TURBO
ously
but
condition
Note
a.
b.
display
the display
changes.
in green does not appear continuin yellow appears each time the picture
:
If you press the PSM or TURBO PICTURE button with the eye
function, the eye function is automatically switched off.
EYE function is not available for RGB input source.
Turbo
picture
selection
(option)
EYE/
When this function is on, the
tinct than normal picture.
Repeatedly
more
brilliant and dis-
on or
off.
(Turbo Picture on)
:
a.
If you press the PSM button with the Turbo picture function, the
Turbo picture function is automatically switched off.
b.
TURBO PICTURE function is not available for RGB input
source.
16
will be
press the TURBO PICTURE button to switch
(Turbo Picture off)
Note
picture
Picture
adjustment
Picture format
You
(Wide),
In
watch
Zoom.
can
TV
in
various
picture formats; Standard,
16:9
models, you can watch TV in various picture formats; Auto,
4:3, 16:9, 14:9 and Zoom.
some
Repeatedly
press the ARC button to select your desired
format.
picture
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
Standard (or 4:3)
This picture format is 4 to 3 of
general
TV.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
ARC
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is
full.
You can move the screen up or down with D / E button.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost. (In some models, you can move the screen up or down
with D / E button.)
Note : In the 1/2 size sub
not available.
picture of PIP mode the picture format is
17
Sound
Sound
SSM
SSM
{
AVL
{
DBS
{
Balance
{
X-WAVE
{
You
(Sound Status Memory)
can
Speech
1.
()O}{OOKOMENU
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Press the MENU button and then D / E
Sound
button to select the
menu.
2.
Press the G button to select SSM.
3.
Press the G button and then D / E button to select
ting
the SSM
on
pull-down
a
sound set-
menu.
Sound
SSM
{
Flat
AVL
{
DBS
{
Music
Movie
Balance
{
Speech
X-WAVE
{
User
{
()O}OOKOMENU
MENU
SOUND
Sound
Press the G button in User to
a.
TURBO
Frequency Adjustment
OK
display
the User sub
menu.
PR
VOL
VOL
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
b. Select
Make
c.
a
sound band
appropriate
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
SSM
Repeatedly
You
can
press the MENU button to return to normal TV
also
recall
a
desired
sound
viewing.
(Flat, Music, Movie,
Speech or User) with SSM button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically
Note
:
though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
appears
18
even
Sound
Sound
You
adjustment
Sound
adjustment
AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
1.
2.
3.
can
adjust balance,
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS or Balance.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
SSM
{
AVL
{
DBS
{
Balance
{
X-WAVE
{
()O}{O OKOMENU
Sound
SSM
{
AVL
{
DBS
Balance
{
{
X-WAVE
{
OOO0
ARC
}{OOKOMENU
MENU
SOUND
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
X-WAVE
You
1.
2.
3.
can
(Wireless Sound) (option)
also listen to the sound
through
TURBO
OK
PR
VOL
VOL
the FM receiver.
PR
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu.
Sound
I/II
SSM
{
87.7OMHz
106.7OMHz
AVL
{
DBS
{
Balance
{
X-WAVE
{
87.9OMHz
88.1OMHz
88.3OMHz
88.5OMHz
88.7OMHz
88.9OMHz
Off
106.9OMHz
107.1OMHz
107.3OMHz
107.5OMHz
107.7OMHz
107.9OMHz
Off
or
SSM
()O}{OOKOMENU
4.
Match the TV's
frequency
Turbo sound selection
and the FM receiver's.
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo
Sound
off)
(Turbo
Sound
on)
19
Sound
adjustment
Sound output selection
In AV
mode, you
can
select
speakers.
output sound for the left and right loud-
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
L+L
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
:
R+R
:
Stereo/Dual
When
reception
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
I/II
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
ton
repeatedly.
DUAL I sends the
DUAL II sends the
DUAL I+II sends
NICAM
primary broadcast language to the loudspeakers.
secondary broadcast language to the loudspeakers.
a separate language to each loudspeaker.
reception (option)
If your set is
with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
20
equipped
Time
Setting the
1.
2.
3.
Setting
clock
Time
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
()O}{OOKOMENU
{
()O}{OOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
1
2
3
4
5
6
7
8
9
On/Off timer
0
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
MENU
OK
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
PR
VOL
VOL
PR
T ime
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr
01
Vol.30
Off
()O}{O OKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
Auto
.
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
21
Other functions
TV and AV modes
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
()O}{OOKOMENU
Press the MENU button and then D / E
Special
2.
3.
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1, AV2,
AV3, S-VIDEO (option) or COMPONENT (option) on the Input
pull-down
menu.
Special
1
4
7
2
5
8
0
3
6
9
Language
Input
{
{
TV
Childolock
{
AV1
Blueoback
{
AV2
Tilt
{
AV3
Degauss
{
S_VIDEO
Game
{
COMPONENT
TV/AV
()O}OOKOMENU
MENU
OK
PR
VOL
VOL
PR
4.
AV1 : VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the AV2 sockets of the set
AV3 : VCR connected to the AV3 sockets of the set
S-VIDEO : S-VIDEO VCR connected to the S-VIDEO sockets
of the set (option)
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV view-
ing.
Alternatively you
can
select the TV
or
AV mode
button.
In AV
to return to TV
mode,
mode, press the
by pressing
the TV/AV
D / E or NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV1 mode when an AV signal is input. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV view-
ing.
With the lock on, the display Child lock appears on the screen if any
button on the front panel is pressed while viewing the TV.
Note : The display Child lock will not appear on the screen if any
button on the front panel is pressed while displaying the menus.
22
Other functions
Blue back
(option)
If you select On
ground appears
on
on
Special
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
Special
menu.
3.
4.
Press the OK
5.
Repeatedly
viewing.
Tilt
3.
5.
press the MENU button to return to normal TV
or
right
if the TV set
be used to
Press the MENU button and then D / E
moves
to
compensate the tilt.
button to select the
MENU
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt
Tilt
4.
F button.
picture may tilt to the left
position. This function can
Special
2.
or
OOO
(option)
The TV
another
1.
o
button to select the
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
2.
o
pull-down
OK
on
the
menu.
PR
Press the OK button.
Repeatedly press the MENU button to return to normal TV
VOL
VOL
PR
viewing.
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
button to select the
menu.
3.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
4.
On mode switches to Off mode.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
2.
5.
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
23
Other functions
Games
Special
Game is
o
o
function
1.
(option)
optional function, only a set with game
by using the remote control handset.
an
Press the MENU button and then D / E
Special
OOO
2.
3.
4.
can
perform
this
button to select the
menu.
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
a
by using
game and then press the OK
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
MENU
OK
PR
VOL
VOL
PR
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Repeatedly press the SLEEP button to select the number of minutes. The display
will appear on the screen, followed by 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
-
-
-
from the number of minutes selected.
SLEEP
Note :
a.
To view the
remaining sleep time, press the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
-
c.
24
-
-
PIP
Option
PIP is
operation (option)
:
an
optional function,
can
operate.
PIP
(Picture
in
that
so
Picture) displays
a
only
the set with PIP function
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
Each time this button is pressed, each
ture is displayed as shown below.
Programme
number
S-VIDEO
Swapping
input
AV2
AV1
AV3
(option)
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
press the SIZE button to select the desired sub
size. The sub picture appears as below.
Repeatedly
1/16 size of the main
Note
ture
:
When the sub
picture
picture
1/9 size
1/2 size
size is 1/2 of the main
picture
(option)
picture,
the
PIP
pic-
quality might get poor.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
SIZE
PR
STILL
PR
POSITION
SWAP
9/4 PIP
INPUT
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations in 4 or 9
sub pictures mode only and see your favorite station by exchanging the main and sub pictures.
Press the 9/4 PIP button to select 4 or 9 sub pictures.
Only the selected 4 or 9 sub pictures search all the stored stations.
Press the 9/4 PIP button again to switch off these sub pictures.
25
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
a
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
TV/AV
Switch on/off
OK
PR
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
PR
SIMPLE text
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
TEXT
M
page.
colour button in LIST mode
button to switch to LIST mode.
Programming
Press the
M
a
(option)
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
26
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
1
2
3
4
5
6
7
8
9
0
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
PR
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
page.
i
27
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double
height text.
button to enlarge the top
button again to enlarge
1
2
3
4
5
6
Press this
9
page.
Press this button
7
8
Press this
again
half of the page.
the bottom half of the
to return to the normal
display.
0
UPDATE
Displays
teletext
the TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
new
will appear at the top left hand
When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
PR
HOLD
the automatic page
text page consists of 2 or
Stops
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
?
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
off press this button again.
When TV and text picture are displayed half and half
:
picture
of the screen, MIX function is not available.
TIME
When
viewing
TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button
again
a
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
28
again
to exit this function.
RED/GREEN,
D
/ E
or
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
LL 75‰
1
OUT
VIDEO
(LMONO)AUDIO(R)
IN2
AV1
AV2
Aerial socket
VCR
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
ANT IN
LL 75‰
Y
OUT
PB
COMPONENT
VIDEO
(L/MONO)AUDIO(R)
VIDEO
IN1
PR
NPUT(480)
(L/MONO)AUDIO(R)
IN2
AV1
AV2
VCR
Audio/Video in/out sockets
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
via audio/video out sockets.
can
tape
Euro scart socket
1.
2.
(option)
by
the TV
on
ANT IN
LL 75‰
PB
Y
OUT
COMPONENT
VIDEO
L/MONO)AUDIO(R)
IN1
AV2
VCR
video
(option)
VCR
Otherwise press the TV/AV button on the remote control handset to select AV 1. The VCR playback picture appears on the
S-VIDEO
screen.
AUDIO
L/MON
R
can
(L/MONO)AUDIO(R)
IN2
AV1
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV 1 mode automatically. But if you want to keep on watching TV mode, press the
D / E or NUMBER buttons.
You
PR
NPUT(480)
VIDEO
also record programmes received
by
the TV
on
AV3
video
VCR
tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
ANT IN
LL 75‰
1
OUT
VIDEO
(LMONO)AUDO(R)
IN2
AV1
AV2
VCR
29
Connection of external
equipment
S-video / Audio in sockets
When
connecting
picture quality will
1.
2.
S-VIDEO VCR
3.
4.
S-VIDEO
AUDIO
R
1.
AV3
S-VIDEO VCR
2.
3.
4.
ANT IN
LL 75‰
Y
OUT
VIDEO
PB
COMPONENTINPU
(LMONO)AUDIO(R)
VDEO
IN1
S-VIDEO VCR to the S-VIDEO
be further improved.
an
in sockets
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COMPONENT INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets of AV2.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
PR
(480i)
(L/MONO)AUDIO(R)
AV2
Headphone
COMPONENT
socket
R
30
AV3
(option)
models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones.
Only
If you press the MUTE
switched off.
AUDIO
(option)
IN2
AV1
S-VIDEOL/MN
socket, the
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select S-VIDEO by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Component
L/MON
(S-AV) (option)
button, the sound from the headphone's is
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Download PDF