LG | 29FS2AMB | LG 29FS2AMB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
38289U0578U
(MC05HA/B,
145J/K/H
TX)
Contents
Installation
3
Location and function of controls
Remote control handset / Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
8
On
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite programme
Calling the programme table
Setting
10
Picture adjustment
PSM (Picture Status Memory) / XD / Cinema (option)
VM (Velocity Modulation) / Virtual HD (option)
Picture adjustment / Eye (option)
Turbo picture selection (option) / Picture format
15
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
X-WAVE (Wireless Sound) (option)
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
19
Time
22
setting
Setting the
Auto sleep
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / XD Demo (option) / Blue back (option)
Tilt / Degaussing (option)/ Set Game Colour (option)
Sleep timer
23
PIP
26
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
27
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart sockets (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets
DTV in sockets / AV out sockets
Headphone socket (option)
30
Troubleshooting
2
check list
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
POWER
MUTE
1
12
1
2
3
4
5
6
7
8
9
0
TV/AV
Before you use the remote control
teries. See the next page.
1.
2
ARC
2.
3
13
SOUND
MENU
PICTURE
4
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
4.
TURBO PICTURE BUTTON / SOUND BUTTON
5.
PLAY
FF
STOP
REC
6
FAVOURITE
21
SSM
PSM
SLEEP
EYE/
INDEX/
Q.VIEW
MAIN STILL/
LIST
16
17
accepts your selection
6.
18
TEXT
PIP
MIX
TIME
REVEAL
SIZE
STILL
POSITION
PR
? MODE
SWAP
M
19
20 7.
i
INPUT
settings.
menu
OK
15
11
or
displays
the current mode.
VCR BUTTONS (option)
control a LG video cassette recorder.
I/II
selects the language during dual language broadcast.
selects the sound output (option).
8.
PSM (Picture Status
recalls your preferred
9.
SLEEP
sets the
sleep
Memory)
picture setting.
timer.
10. MAIN STILL/ * (or STILL)
freezes motion of the picture.
( With TELETEXT)
( With PIP)
11. TELETEXT BUTTONS
(option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
12. MUTE
switches the sound
on or
off.
13. TV/AV
selects TV
or
AV mode.
switches the set
4
(option)
picture/sound.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts
I/II
PR
number.
(Aspect Ratio Control)
changes the picture format.
selects Turbo
PR
10
a
VOL
REW
9
10
select
OK
VOL
7
standby.
ARC
PR
8
on
3.
14
TURBO
5
POWER
switches the set
handset, please install the bat-
on
from
standby.
Location and function of controls
14. MENU
selects
POWER
a menu.
15. LIST
displays
16. SSM
12
1
the programme table.
(Sound Status Memory)
preferred sound setting.
2
recalls your
17. EYE/ * (option)
switches the eye function
previously
off.
6
8
9
0
TV/AV
PICTURE
MENU
4
14
OK
TURBO
(option)
on or
PR
off.
VOL
VOL
PR
20. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
REW
PLAY
FF
STOP
REC
6
FAVOURITE
21
I/II
SSM
PSM
SLEEP
LIST
15
7
8
9
10
Q.VIEW
INDEX/
MAIN STILL/
16
17
EYE/
18
TEXT
19
11
21. FAVOURITE
:
5
7
13
5
a
4
3
viewed programme.
switches FRONT DISPLAY
selects
3
SOUND
returns to the
19. INDEX/ *
2
ARC
on or
18. Q.VIEW
*
MUTE
1
favourite programme.
MIX
TIME
REVEAL
SIZE
STILL
UPDATE
? MODE
M
i
10
No function
COLOURED BUTTONS : These buttons
TELETEXT models) or programme edit.
Battery
are
used for teletext
(only
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the
battery compartment. Install two batteries as indicated by
polarity symbols ( + and ) marked inside the compartment.
(With
TELETEXT / Without
PIP)
the
-
I/II
SSM
PSM
SLEEP
EYE/
INDEX/
Q.VIEW
MAIN STILL/
LIST
PIP
20
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
SIZE
STILL POSITION
PR
PR
(Without
SWAP
INPUT
TELETEXT / With
PIP)
5
Location and function of controls
Front
panel
29/32FS2 series
29FC9 series
3
3
MENU
OK
4
4
PR
ON/OFF
1
1
5
PR
4
2
VOL
2 5
7
7
25/29FX5 series
29/32FS4 series
1253
MENU
3
4
7
25/29FB9 series
OK
VOL
4
PR
12534
7
1
ON/OFF
25/29FC1 series
2 5
MENU
OK
VOL
PR
12534
29FY1 series
Side
panel
8
AV IN 3
5
7
1
2
3
4
6
S-VIDEO
S-VIDEOL/MN
VIDEOL/MN
AUDIO
AUDIO
R
R
AV IN3
AV IN3
S-VIDEOL/MN
AUDIO
R
6
6
Location and function of controls
1.
MAIN POWER
(ON/OFF)
switches the set
2.
on or
off.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched on.
3.
4.
MENU
selects
standby
mode.
a menu.
OK
accepts your selection
or displays
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
the current mode.
F / G
selects
a programme or a menu item.
switches the set on from standby.
5.
REMOTE CONTROL SENSOR
6.
AUDIO/VIDEO IN SOCKETS
(AV IN3)
Connect the audio/video out sockets of external
S-VIDEO/AUDIO IN SOCKETS
(S-AV)
Connect the video out socket of
an
equipment
to these sockets.
S-VIDEO VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO VCR to the audio sockets
7.
8.
EYE (option)
adjusts picture according
to the
surrounding
as
in AV IN3.
conditions.
HEADPHONE SOCKET
Connect the
(option)
headphone plug to this
socket.
7
Basic
operation
On and off
1.
2.
3.
4.
POWER
MUTE
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
,
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
1
2
3
4
5
6
7
8
9
0
TV/AV
Volume
MENU
Press the F / G button to
SOUND
selection
You can select
buttons.
a
programme number with the D / E
or
NUMBER
adjustment
OK
Quick view
VOL
watching.
adjust
the volume.
Press the Q.VIEW button to view the last programme you
PR
VOL
Programme
were
PR
Mute function
Press the MUTE button. The sound is switched off and the
display
W
appears.
You can cancel it
I/II
by pressing
the
MUTE,
F /
G, SSM, I/II, TURBO
SOUND button.
SSM
Auto Demonstration
Q.VIEW
To review all the
menus programmed in the set, press the OK butcontrol for about 10 seconds. To stop auto demonstration, press any button of the panel control or POWER button of
the remote control.
ton of the
On
panel
screen
language
selection
The menu can be displayed
First select your language.
1.
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
3.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
language.
viewing.
8
on
On
screen menus
The
an
dialogue between you and your set takes place on screen with
operator menu. The buttons required for the operating steps are
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
F / G or D / E
of
an
item in the sub
or
pull-down
menu
with
.
You can move to the higher level menu with OK or F button and
to move to the lower level menu press the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
On some models, the Language, Cinema, XD Demo,
Set Game Colour, X-WAVE, Virtual HD or §Volume will
not
display.
Station
ARC
Auto programme
MENU
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
OK
PR
()O}{OOKOMENU
VOL
()O}{O OKOMENU
Station
menu
VOL
PR
Manual programme
Picture
PSM
XD
{
{
Cinema
{
{
{
{
VM
VirtualOHD
Contrast
Brightness
{
{
{
Colour
Sharpness
()O}{OOKOMENU
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
Picture
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
DBS
{
O1OOCO03OOO6OOSO17
AVL
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
X-WAVE
{
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{O OKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{O OKOMENU
Time
menu
Special
Language
Input
Childolock
XDoDemo
Blueoback
{
{
{
{
Degauss
{
{
{
SetoGameoColour
{
Tilt
()O}{OOKOMENU
Special
menu
TV programme
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
()O}{O OKOMENU
can
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
1
2
3
4
5
6
7
8
9
ARC
0
4.
OK
PR
VOL
PR
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
BG
()O}{O OKOMENU
MENU
VOL
{
System
StorageOfrom
5.
6.
7.
8.
9.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
Normal search
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
36%
MENU
MENU
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting up
Manual programme
TV stations
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
programme.
3.
Press the
G
button to
display
the Manual programme
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
2
{
1
()O}{O OKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
2
3
4
5
6
7
8
9
ARC
0
MENU
OK
PR
VOL
VOL
PR
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
FG
Stored
16. To store another
17.
Repeatedly
viewing.
station, repeat steps 4 to 15.
press the MENU button to return to normal TV
11
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
4.
Press the D / E button to select Name.
Press the G button on the Name pull-down
Press the D button. You
and the alphabet A to Z.
can use a
1 to 3.
menu.
+, -, the numeric 0 to 9
blank,
5.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
6.
Press the OK button.
7.
Repeatedly
viewing.
()O}{O OKOMENU
press the MENU button to return to normal TV
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
If the reception is poor at the
Booster to On.
1
ARC
2.
MENU
3.
4.
PR
of TV
set with
signal,
select
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Press the D / E button to select On
or
Off
on
the Booster
pull-
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
VOL
VOL
area
a
Repeat
down
OK
fringe
Only
press the MENU button to return to normal TV
PR
Fine
tuning
Normally
1
2.
3.
4.
fine
tuning
is
only
necessary if
reception
the 'Manual programme tuning'
Press the D / E button to select Fine.
Press the G button.
Repeat
Press the F / G
sound
on
steps
is poor.
1 to 3.
button to fine tune for the best
the Fine
pull-down
picture
and
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
FG
O}{O OKOMENU
12
5.
Press the OK button.
6.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
Setting up
Programme
TV stations
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
Station menu.
2.
Press
the
G
button
and
then
D
E
/
button
to
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
select
Programme edit.
3.
Press the G button to
display
the
Programme edit
menu.
edit
Programme
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
1
2
3
4
5
6
7
8
9
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
a
programme
Select
a programme to be deleted with the D / E orF/Gbutton.
Press the RED button twice.
The
selected
grammes
Copying
1.
2.
a
Select
all the
following
a
Select
2.
Press
3.
Move
the D
Press
MENU
pro-
programme
programme to be copied with the D / E orF/Gbutton.
Press the GREEN button.
Moving
4.
programme is deleted,
shifted up one position.
a
All the
1.
are
0
ARC
following
programmes
are
shifted down
one
PR
VOL
VOL
position.
PR
programme
a programme to be moved with the D / E orF/Gbutton.
the YELLOW button.
the programme to the desired programme number with
/ E orF/Gbutton.
the YELLOW button again to release this function.
edit
Programme
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
Skipping
a
Select
a
1.
programme number
programme number to be
PR
skipped with
PR
SWAP
INPUT
the D / E orF/G
button.
2.
3.
Press the BLUE button. The
skipped programme turns to blue.
again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER butPress the
tons
or
Repeatedly
BLUE
button
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
13
Setting up
Station
TV stations
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
This function lets you select your favourite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
programme.
3.
()O}{O OKOMENU
Press the G button to
display
the Favourite programme
menu.
Station
1
2
4.
5
6
7
8
9
ARC
0
5.
6.
7.
MENU
{
ProgrammeOedit
FavouriteOprogramme
{
56n Ca 05
{
{
()}{O OKOMENU
3
4
AutoOprogramme
ManualOprogramme
8.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
OK
PR
VOL
VOL
press the FAVOURITE button to select stored favourite
programmes.
Repeatedly
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
PR
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
FAVOURITE
Station
LIST
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{O OKOMENU
PR
PR
SWAP
INPUT
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E orF/Gbutton.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV viewing.
There
14
Picture
PSM (Picture Status
adjustment
Picture
Memory)
PSM
XD
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
1.
2.
Press the G button and then D / E button to select
setting on the PSM pull-down menu.
3.
a
picture
{
{
{
{
{
{
{
{
{
Cinema
VM
Virtual OHD
Contrast
Brightness
Colour
Sharpness
()O}{OOKOMENU
Picture
PSM
XD
Cinema
VM
VirtualOHD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
{
{
{
Dynamic
Standard
Mild
Game
User
()O}OOKOMENU
F button.
press the MENU button to return to normal TV
4.
Press the OK
5.
Repeatedly
viewing.
or
You
can also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for
good picture reproduction
at the
factory
and cannot be
ARC
MENU
changed.
XD
OK
PR
VOL
VOL
You
can enjoy the vivid and hi-definition picture
Digital Reality processor technology.
PR
with LG's excellent
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button and then D / E button to select XD.
Picture
PSM
XD
Cinema
VM
VirtualOHD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
{
{
{
PSM
On
Off
()O}OOKOMENU
3.
4.
5.
Press the G button and then D / E button to select On
on the XD pull-down menu.
Press the OK or F button.
Repeatedly
viewing.
Note
:
or
Off
PR
PR
SWAP
INPUT
press the MENU button to return to normal TV
When
selecting picture options (Dynamic, Standard,
Game) in picture menu 'XD' is automatically
changed to 'On'
Mild
or
15
Picture
Picture
Cinema
PSM
XD
{
{
{
{
{
{
{
{
{
Cinema
VM
VirtualOHD
Contrast
Brightness
Colour
Sharpness
()O}{OOKOMENU
adjustment
(option)
When you watch the movie, this function
best picture appearance.
adjusts
the set to the
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Cinema.
Press the G button and then D / E button to select On or Off
Press the OK button.
Repeatedly press the MENU button to return to normal TV
1.
2.
3.
4.
5.
.
viewing.
VM
(Velocity Modulation)
This is the function to enhance the
1.
2.
sharpness
of
image edge.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select VM.
Picture
ARC
PSM
XD
MENU
Cinema
VM
VirtualOHD
Contrast
OK
Brightness
Colour
Sharpness
PR
VOL
1
()O}OOKOMENU
VOL
PR
{
{
{
{
{
{
{
{
{
3.
4.
5.
Press the G button and then F / G button to adjust the VM.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Virtual HD
1.
2.
(option)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Virtual HD.
Picture
PSM
XD
Cinema
VM
VirtualOHD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
{
{
{
100
Pro
1080i
()O}OOKOMENU
3.
4.
5.
Press the G button and then D / E button to select 100, Pro
1080i.
Press the OK button.
Repeatedly press
viewing.
Note
16
the MENU
or
button to return to normal TV
:
a.
When you change to 16:9 mode after selecting 100 for Virtual
HD, it's automatically changed to Pro.
b.
It's not available to
use
100 for Virtual HD in NTSC
signal.
Picture
Picture
You
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
can
and tint
ness
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
1.
2.
Brightness, Colour
or
Sharpness.
Picture
PSM
XD
{
{
{
{
{
Cinema
VM
VirtualOHD
Contrast
{
Brightness
100
{
{
{
Colour
Sharpness
()O}OOKOMENU
Press the G button and then F / G button to make
3.
adjustments
on
the each sub
appropriate
menu.
PICTURE
Contrast
80
TURBO
}{O()OOKOMENU
MENU
OK
PR
VOL
4.
Press the OK button to store it for the
5.
Repeatedly
viewing.
picture
VOL
PR
user.
press the MENU button to return to normal TV
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
EYE/
automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
some
models, the
PSM
set will
Press the EYE/ * button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
condition
Note
eye
display
display
changes.
but the
:
in
If you press the PSM
in green does not appear continuappears each time the picture
yellow
or
TURBO PICTURE button with the
function, the eye function is automatically switched off.
17
Picture
Turbo
adjustment
selection
picture
When this function is on, the
tinct than normal
Repeatedly
(option)
picture
will be
more
brilliant and dis-
picture.
press the TURBO PICTURE button to switch
(Turbo Picture off)
on or
off.
(Turbo Picture on)
Note : If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
ARC
PICTURE
TURBO
PR
Picture format
You
can
watch TV in various
picture formats; 4:3,
16:9
(Wide)
or
Zoom.
In some
models, you can watch TV in various picture formats; 4:3,
(Wide), 14:9, Zoom or Auto.
Repeatedly press the ARC button to select your desired picture format.
16:9
PR
4:3
This
picture
16:9
You can
PSM
format is 4 to 3 of
general
enjoy the cinema (the picture
through the 16:9 mode.
TV.
format of
16:9)
or
general
TV
programme
14:9
You
(option)
can
through
the
picture
format of 14:9
screen
or
general
TV programme
14:9 is viewed
4:3 is magnified to the upper / lower and
the screen up or down with D / E button.
screen
move
enjoy
the 14:9 mode. The
just like that the
left / right. You can
Zoom (option)
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost. In some models, you can move the screen up or down
with D / E button.
Auto (option)
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
Note :
a.
In the 1/2 PIP modes, ARC function isn't available.
b.
You can only select 4:3 in Component (720p/1080i) mode
18
only.
Sound
adjustment
SSM
(Sound Status Memory)
You
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Sound
can
Sports
SSM
{
DBS
{
AVL
{
Balance
{
X-WAVE
{
Press the MENU button and then D / E button to select the
1.
Sound
()O}{O OKOMENU
menu.
2.
Press the G button to select SSM.
3.
Press the G button and then D / E button to select
ting
on
a
sound set-
the SSM
Sound
pull-down menu.
Frequency Adjustment
Sound
SSM
{
Flat
DBS
{
AVL
{
Music
Movie
Balance
{
Sports
X-WAVE
{
User
{
()O}OOKOMENU
ARC
Press the G button in User to
a.
display
the User sub
menu.
MENU
OK
PR
0.1O0.5O1.5O5.0O10OkHz
VOL
()O}{O OKOMENU
b. Select
Make
c.
a
sound band
appropriate
VOL
PR
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly
You
or
can
press the MENU button to return to normal TV
also recall
User)
a
desired sound
with SSM button
on
Music, Movie and Sports
duction at the
Note
:
factory
and
viewing.
SSM
(Flat, Music, Movie, Sports
the remote control. The sound
programmed for good
cannot be changed.
are
If you press the SSM button after making
Flat,
sound repro-
appropriate adjust-
the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Sports.
ment
on
19
Sound
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
X-WAVE
{
You
adjustment
adjust balance, AVL (Auto Volume Leveler), DBS or headphone volume/sound (option). AVL automatically keeps on an equal
volume level even if you change programmes. If you switch DBS to
on, the set creates a dynamic bass sound. The Turbo sound crecan
ates
all around sound
an
as
in
a
concert hall.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL, DBS, Balance or §Volume (option).
1.
()O}{O OKOMENU
adjustment
2.
Sound
SSM
1
2
3
4
5
6
3.
7
8
9
4.
{
DBS
{
AVL
Balance
{
X-WAVE
{
{
}{OOKOMENU
ARC
0
viewing.
X-WAVE
MENU
SOUND
You
1.
TURBO
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Repeatedly press the MENU button to return to normal TV
OK
2.
PR
can
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Sound
VOL
VOL
PR
SSM
{
DBS
{
AVL
{
Balance
{
X-WAVE
{
X-WAVE
107MHZ
88MHZ
or
SetOFreq
{
FM95.0MHZ
Off
}{0-9OOKOMENU
()O}{OOKOMENU
3.
Press the G button and then
D
/ E
button to select Set
Frequency.
4.
5.
Press the G button to tune in a
frequency on the X-wave menu.
Use the number 0 to 9 or press the F / G button to match the
TV's frequency and the FM receiver's.
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more that 5m (16.4ft)
between the TV and FM Receiver.
c.
In certain areas, the FM transmitter ability may be weak, such
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
Turbo sound selection
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo
20
Sound
off)
(Turbo
Sound
on)
Sound
adjustment
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
L+L
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
:
R+R
:
Stereo/Dual
When
reception
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo
signal is weak, you can switch to
by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
mono
for dual language broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
If
a
ton
I/II
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
21
Time
T ime
Setting the
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Time
()O}{O OKOMENU
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
{
()O}{O OKOMENU
3.
4.
5.
6.
Press the G button and then D / E button to adjust the hour.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
ARC
MENU
1.
OK
2.
3.
PR
VOL
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
Time
PR
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr1
Vol.30
Off
()O}{O OKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset and
the On/Off time is off.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
22
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
Special
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
Inputs
cassette recorder (VCR), or other equipment is connected to the set.
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
button to select the
Language
Input
{
Childolock
{
XDoDemo
{
Blueoback
{
Tilt
{
Degauss
{
SetoGameoColour
{
{
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, COMPONENT on the Input pull-down menu.
Special
{
Language
Input
{
Childolock
{
XDoDemo
Blueoback
{
Tilt
Degauss
{
{
SetoGameoColour
{
{
TV
AV1
AV2
AV3
COMPONENT
1
()O}OOKOMENU
AV1
3
4
5
6
7
8
9
0
TV/AV
VCR connected to the Euro scart socket or AV IN 1 sockthe set
AV2 : VCR connected to the AV IN 2 sockets on the set.
AV3 : VCR connected to the AV IN 3 sockets on the set.
COMPONENT : DVD or SET-TOP Box connected to the
COMPONENT sockets on the set
Repeatedly press the MENU button to return to normal TV
ets
4.
2
:
on
MENU
PR
VOL
viewing.
PR
Alternatively you
TV/AV button.
can
select the TV
In AV mode, to return to TV
NUMBER buttons.
Auto AV
or
AV mode
mode, press the
by pressing
D / E or
the
FAVOURITE,
FAVOURITE
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV1 mode when an AV signal is input. But if you
want to keep on watching TV mode, press the D / E or NUMBER
buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
23
Other functions
Special
Language
Input
{
Childolock
{
XDoDemo
{
Blueoback
{
Tilt
{
Degauss
{
SetoGameoColour
{
{
()O}{OOKOMENU
XD Demo
(option)
Use it to
off.
the difference between XD demo
see
on
and XD Demo
Press the MENU button and then D / E button to select the
1.
Special
menu.
Press the G button and then D / E button to select XD
2.
Demo.
Press the G button to begin XD Demo.
To stop XD Demo, press the MENU button.
3.
4.
Blue back
(option)
If you select On on the Blue back pull-down menu, the blue
background appears on the screen when there is no or poor signal.
Press the MENU button and then D / E
1.
Special
Press the G button and then D
2.
button to select the
menu.
/ E
button to select Blue
back.
ARC
Press the G button and then D / E button to select On or Off
the Blue back pull-down menu.
Repeatedly press the MENU button to return to normal TV
3.
MENU
on
4.
viewing.
PR
VOL
VOL
Tilt
PR
The TV
another
1.
picture may tilt to the left
position. This function can
Press the MENU button and then D / E
Special
2.
3.
4.
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the Tilt
Repeatedly press the MENU button to return to normal TV
.
viewing.
24
right if the TV set moves to
be used to compensate the tilt.
or
Other functions
Special
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
button to select the
Language
Input
{
Childolock
{
XDoDemo
{
Blueoback
{
Tilt
{
Degauss
{
SetoGameoColour
{
{
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
Set Game Colour
screen
condition
by degaussing, try
(option)
This function only used if there is some problem about
colour when you play game console in AV mode.
picture
ARC
MENU
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Set Game
Colour.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
PR
VOL
VOL
PR
: Although you select On from the Set Game Colour option,
automatically the Set Game Colour option will be changed to Off in
Note
TV mode.
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
-
-
-
Note :
a.
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
-
c.
-
-
25
PIP
operation (option)
Option
PIP is
optional function,
so
that
only
the set with PIP function
operate.
can
PIP
:
an
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch
press this button
again
on
the sub
mode selection for sub
Input
picture.
to switch it off.
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
Each time this button is pressed, each
displayed as below.
input
ture is
Programme
number
Note
:
AV1
AV2
AV3
Yon can select the input mode for the sub picture, after
the external equipment.
con-
necting
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
PIP
1/9 size
SIZE
STILL
POSITION
PR
PR
SWAP
INPUT
: When the sub picture
quality might get poor.
Note
ture
Sub
picture
1/2 size
size is 1/2 of the main
picture,
pic-
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
26
the
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture
position
is
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
1
2
3
Switch on/off
4
5
6
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
7
8
9
0
OK
reappears.
SIMPLE text
PR
Page selection
1.
2.
PR
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
page.
a colour button in LIST mode (option)
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
TEXT
M
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
coloured button.
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in the
can
4.
same
way.
27
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
1
2
3
4
5
6
7
8
9
0
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
PR
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
28
page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays the
TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
?
ture.
To switch the TV
picture
off press this button
again.
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
change
the sub page, press the RED /
GREEN,
D / E but-
ton.
Press this button
again
to exit this function.
29
Connection of external
You
connect additional
can
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
DVD
VDEO
Y
PB
L- AUDO -R
PR
COMPONENT
/DTV
IN
VIDEO
L-AUDIO-
Here shown may be somewhat different from your set.
R
AV
OUT
AV
N2
ANTENNA
Aerial socket
IN
AV
N1
(MONO)
1.
Connect the RF out socket of the VCR to the aerial socket
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number
the 'Manual programme tuning' section.
4.
Select the programme number where the VCR channel
stored.
Press the PLAY button on the VCR.
VCR
5.
Y
DVD
PB
PR
on
using
is
L- AUDIO -R
VIDEO
COMPONENT
/DTV
IN
VIDEO
L-AUDO-
Audio/Video in/out sockets
R
AV
OUT
ANTENNA
AV
IN2
IN
(option)
AV
IN1
(MONO)
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT sock-
VCR
ets of the set.
2.
3.
If the VCR is connected to the AV sockets
TV/AV button to select AV1, AV2 or AV3.
Press the PLAY button
The VCR
You
DVD
/DTV
Y
PB
PR
can
on
playback picture
on
the set, press the
the VCR.
appears
on
the
also record programmes received
out sockets.
screen.
by
the TV
on
video
tape via audio/video
L- AUDIO -R
VIDEO
COMPONENT
IN
AV
N2
ANTENNA
IN
1
AV
OUT
VIDEOL-AUR
(MONO)
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
VCR
1.
Connect the Euro scart socket of the VCR to the Euro scart
2.
socket of the set.
Press the PLAY button
on
the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV1 mode automatically. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons.
S-VIDEOL/MN
AUDIO
R
(option)
AV IN3
Otherwise press the TV/AV button on the remote control handset to select AV1. The VCR playback picture appears on the
screen.
You
VCR
30
can
tape.
also record programmes received
by
the TV
on
video
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
an
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO
be further
equipment
S-VIDEOL/MN
socket, the
improved.
AUDIO
R
1.
2.
3.
4.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV3 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
AV3
S-VIDEO VCR
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
DVD
/DTV
Y
PB
PR
L- AUDIO -R
VIDEO
COMPONENT
IN
VIDEO
L-AUDIO-
R
AV
OUT
AV
IN2
ANTENNA
IN
AV
IN1
(MONO)
Component
1.
2.
3.
4.
in sockets
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT
(480i/480p/576i/576p/720p/1080i) to the COMPONENT
INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT
(480i/480p/576i/576p/720p/1080i) to AUDIO IN sockets of
COMPONENT.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
COMPONENT
(DVD)
DVD
/DTV
PB
PR
L- AUDIO -R
COMPONENT
VIDEO
L-AUDIO-
R
AV
OUT
AV
IN2
ANTENNA
IN
AV
IN1
(MONO)
COMPONENT
DTV in sockets
1.
Y
VIDEO
IN
(DTV)
Connect the HD-SET TOP
inputs of the COMPONENT
(Y PB PR) on the set.
to the
COMPONENT INPUT sockets
2.
Connect audio
3.
Press the TV/AV button to select COMPONENT.
to Audio sockets of COMPONENT.
inputs
DVD
/DTV
Y
PB
PR
L- AUDIO -R
VIDEO
COMPONENT
IN
VIDEO
L
-AUDO-
R
AV
OUT
ANTENNA
AV
IN2
IN
AV
IN1
AV out sockets
(MONO)
Connect the audio/video in sockets of the other TV
or
monitor to AV
Second TV
sockets of the set.
Headphone
Only
(option)
models which have
function.
Insert the
You
socket
can
headphone plug
a
socket
can
perform
headphone socket of the set.
through the headphones. To adjust
this
S-VIDEO
to the
listen to the sound
headphone volume,
headphone
the
press the F / G button.
If you press the MUTE
switched off.
button, the sound from the headphone's is
VIDEOL/MN
AUDIO
R
AV IN3
31
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF

advertising