LG | 29FU1RLX | LG 29FU1RLX Owner’s Manual

Driver Install Guide Specification
1. Model Description
MODEL
CW62C
BRAND
LG
SUFFIX
ATS
Product Name
O/Manual
2.
Prepared
Acknowledged
Auria F
'07. 09.21
KB Kim
'07.09.21
Part No.
MFL39073901_b
Printing Specification
1. Trim Size (Format) : 150mm x 210mm
2. Printing Colors
• Cover : 1 Color (Black)
• Inside : 1 Color (Black)
3. Stock (Paper)
• Cover : Uncoated paper 70 g/㎡
• Inside : Uncoated paper 70 g/㎡
4. Printing Method :
5. Bindery : Saddle stitch
6. Language : English
7. Number of pages : 32 pages
* This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG
standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted when Part certification test
and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3.
Changes
j
i
h
g
f
e
d
c
b
07/09/21
Auria F Y
Content Revision
a
07/09/06
Auria F Y
Add New panel
YY/MM/DD
SIGNATURE
REV.
NO.
CHANGE NO.
CHANGE
CONTENTS
P/NO.MFL39073901_b
Totalpages : 32 pages
Pagination sheet
Front
Cover
(EN)
P/NO.
EN
EN
EN
EN
2
3
4
5
…
EN
EN
EN
29
30
31
Back
Cover
(EN)
Colour Television
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this information to your dealer when you require service.
Model number
Serial number
:
:
P/NO : MFL39073901 (CW62C 33981403/4/5/6 TX) b
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
7
On screen menus
Menu selection
8
Setting up TV stations
Auto programme tuning
Manual programme tuning / Fine Tuning
Programme edit / Favourite programme
Calling the programme table
9
Picture adjustment
15
PSM (Picture Status Memory) / XD
Eye (option) / Picture adjustment
2
Sound adjustment
SSM (Sound Status Memory) / Turbo sound selection
Sound adjustment
X-WAVE (Wireless Sound) (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
17
Time setting
Setting the clock / Setting the On/Off timer
Auto sleep
20
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing / Sleep timer
21
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change
24
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
25
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
Component in sockets (option)
28
Troubleshooting check list
30
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture.
Do not place anything containing liquid on top of the set, this may
cause a fire or could give an electric shock.
Service
Never remove the back cover of the set as this can expose you to
very high voltage and other hazards. If the set does not operate
properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket on the back cover. For the
best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Note:
To remove dirt or fingerprint on the surface of your TV, please rub
with a line-free cloth supplied in the accessory.
Do not pose too much pressure in cleaning so as to prevent any
risk of damage to the product.(only for 29FU1 series models.)
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the panel
of the set.
1
11
13
14 Remote control handset
10
2
1
2
3
4
5
6
7
8
9
0
3
Before you use the remote control handset, please install the batteries. See the next page.
1. POWER
switches the set on from standby or off to standby.
8
PR
4
VOL
OK
3. MENU
selects a menu.
VOL
PR
5
6
7
9
12
(With TELETEXT / PIP)
PR
OK
VOL
PR
5
UPDATE/
HOLD/
(With TELETEXT / Without PIP)
4
4. D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
scans programmes automatically.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the current mode.
5. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
6. SLEEP
sets the sleep timer.
0
VOL
2. NUMBER BUTTONS
Switches the set on from standby or directly select a number.
7. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
Location and function of controls
8. FAVOURITE
selects a favorite programme.
1
9. EYE/
10
* (option)
switches
the eye function on or off.
11
13
Q.VIEW
LIST
14
10. MUTE
switches the sound on or off.
11. TV/AV
selects TV or AV mode.
switches the set on from standby.
exits the Teletext mode.
2
1
2
3
4
5
6
7
8
9
3
0
12. I/II/
* the language during dual language broadcast.
selects
PR
selects the sound output (option).
13. Q.VIEW (or YELLOW)
returns to the previously viewed programme.
8
4
VOL
14. LIST (or BLUE)
OK
VOL
PR
12
displays the programme table.
9
6
*
: No function
(Without TELETEXT / PIP)
COLOURED BUTTONS : These buttons are used for teletext (only
TELETEXT models) or programme edit.
Battery installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and - ) marked inside the compartment.
1
2
3
4
5
6
7
8
9
0
PR
VOL
OK
VOL
PR
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
7
(With PIP / Without TELETEXT)
5
Location and function of controls
Front panel
Side Panel
29FU1 series
1
2 3
OK
29FU3 series
4
5
PR
1
23
1. MAIN POWER (ON/OFF)
switches the set on or off.
2. POWER/STANDBY INDICATOR
illuminates brightly when the set s in standby mode.
dims when the set is switches on.
3.
REMOTE CONTROL SENSOR
Note : Only use the supplied remote control handset. (when
you use others, they won't be able to function.)
4. MENU
selects a menu.
5. OK
accepts your selection or displays the current mode.
F / G (Volume Up/Down)
Adjusts the volume.
adjusts menu setting.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6.
AUDIO/VIDEO (AV IN2) IN SOCKETS (option)
Connect the audio/video out sockets of external equipment
to this socket.
Note :
Shown is a simplified representation of front or side panel. What is shown here
may be somewhat different from your set or can not be supplied on your area.
6
6
Basic operation
On and off
1. Press the main power button to switch the set on.
2. If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on fully.
3. Press the POWER button on the remote control handset.
The set reverts to standby mode.
4. Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme selection
You can select a programme number with the D / E or NUMBER
buttons.
1
2
3
Volume adjustment
4
5
6
7
8
9
Press the F / G button to adjust the volume.
Q.VIEW (or YELLOW)
0
Press the Q.VIEW (or YELLOW) button to view the last programme
you were watching.
Mute function
PR
VOL
Press the MUTE button. The sound is switched off and the display
W appears.
You can cancel it by pressing the MUTE, F / G, I/II/ (option), button.
*
OK
VOL
PR
On screen language selection (option)
The menu can be displayed on the screen in desired language.
First select your language.
1. Press the MENU button and then D / E button to select the
Special menu.
2. Press the G button to select Language.
3. Press the G button and then D / E button to select your desired
language.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
4. Repeatedly press the MENU button to return to normal TV
viewing.
7
On screen menus
The dialogue between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
Menu selection
1. Press the MENU button and then D / E button to display each
menu.
2. Press the G button and then D / E button to select a menu item.
3. Press the G button to display the sub menu or the pull-down
menu.
4. Change the setting of an item in the sub or pull-down menu with
the F / G or D / E.
You can move to the higher level menu with the OK or F button and to move to the lower level menu press the G button.
Note :
a. In the teletext mode, menus are not displayed.
b. In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c. In some models, Tilt, Booster or Degauss will not display.
d. On some models, the Language, X-WAVE will not display.
Auto programme
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
{
{
{
{
()O}{OOKOMENU
System
System
StorageOfrom
NormalOsearch
TurboOsearch
{
{
{
{
BG
I
DK
M
{
{
{
{
{
{
2
()O}{OOKOMENU
Station menu
Manual programme
Picture
PR
VOL
OK
VOL
PSM
XD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
Storage
System
Channel
Fine
Search
Name
()O}{OOKOMENU
()O}{OOKOMENU
Picture menu
PR
Programme edit
Sound
SSM
TurbooSound
AVL
Balance
X-WAVE
{
{
{
{
{
O0OOCO03
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{OOKOMENU
()O}{OOKOMENU
Sound menu
Time
Clock
Offotime
Onotime
Autoosleep
{
{
{
{
()O}{OOKOMENU
Time menu
Special
Language
Input
Childolock
Degauss
{
{
{
{
()O}{OOKOMENU
Special menu
TV programme
8
Setting up TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note : In some models up to 200 TV stations can be stored.
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
{
{
{
{
Auto programme tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1. Press the MENU button to select the Station menu.
2. Press the G button and then D / E button to select Auto programme.
3. Press the G button to display the Auto programme menu.
Auto programme
System
System
StorageOfrom
NormalOsearch
TurboOsearch
{
{
{
{
BG
I
DK
M
()O}{OOKOMENU
4. Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
5. Press the F button.
6. Press the D / E button to select Storage from.
7. Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric ‘0’ (or ‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.
8. Press the OK button.
9. Press the D / E button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a. Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality and sound, select
the system again in the Manual programme menu.
10. Press the G button to begin auto programming.
MENU
1
2
3
4
5
6
7
8
9
0
PR
VOL
OK
VOL
PR
Normal search
Auto programme
System
StorageOfrom
NormalOsearch
TurboOsearch
()O}{OOKOMENU
{
{
{
{
OOCO01O(BG)
7
36%
MENU
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the ‘Programme edit’ section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting up TV stations
Manual programme tuning
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
{
{
{
{
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1. Press the MENU button to select the Station menu.
2. Press the G button and then D / E button to select Manual
programme.
3. Press the G button to display the Manual programme
menu.
()O}{OOKOMENU
Manual programme
Storage
System
Channel
Fine
Search
Name
1
2
3
4
5
6
7
8
9
0
PR
VOL
OK
PR
VOL
{
{
{
{
{
{
2
()O}{OOKOMENU
4. Press the D / E button to select Storage.
5. Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric ‘0’ (or ‘00’) in front of it,
i.e. ‘05’ (or ‘005’) for 5.
6. Press the OK button.
7. Press the D / E button to select System.
8. Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
9. Press the OK or F button.
10. Press the D / E button to select Channel.
11. Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric ‘0’ (or
‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.
12. Press the OK or F button.
13. Press the D / E button to select Search.
14. Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
15. Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
Channel
Fine
Search
Name
{
{
{
{
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting up TV stations
Assigning a station name
1. Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the D / E button to select Name.
3. Press the G button on the Name pull-down menu.
4. Press the D button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the E button you can select in the opposite direction.
5. Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
6. Press the OK button.
7. Repeatedly press the MENU button to return to normal TV
viewing.
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
{
{
{
{
()O}{OOKOMENU
Booster (option)
In some models, Booster is an optional function. Only a set with
Booster can perform this function.
If the reception is poor at the fringe area of the TV signal, select
Booster to On.
1
2.
3.
4.
Repeat the ‘Manual programme tuning’ steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Press the D / E button to select On or Off on the Booster pulldown menu.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV
viewing.
PR
VOL
OK
VOL
PR
Fine tuning
Normally fine tuning is only necessary if reception is poor.
1 Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the D / E button to select Fine.
Manual programme
Storage
System
Channel
Fine
Search
Name
{
{
{
{
{
{
{{{
Stored
3. Press the G button.
4. Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
11
Setting up TV stations
Programme edit
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
{
{
{
{
This function enables you to delete or skip the stored programmes.
You can also move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1. Press the MENU button to select the Station menu.
2. Press the G button and then D / E button to select
Programme edit.
3. Press the G button to display the Programme edit menu.
()O}{OOKOMENU
Programme edit
OOOOCO01
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{OOKOMENU
1
2
3
4
5
6
7
8
9
Copying a programme
1. Select a programme to be copied with the D / E or F / G button.
2. Press the GREEN button.
All the following programmes are shifted down one position.
0
PR
VOL
OK
PR
Deleting a programme
1. Select a programme to be deleted with the D / E or F / G button.
2. Press the RED button twice.
The selected programme is deleted, and all the following programmes are shifted up one position.
VOL
Moving a programme
1. Select a programme to be moved with the D / E or F / G button.
2. Press the YELLOW button.
3. Move the programme to the desired programme number with
the D / E or F / G button.
4. Press the YELLOW button again to release this function.
Programme edit
OOOOCO01
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
Skipping a programme number
1. Select a programme number to be skipped with the D / E or F / G
button.
2. Press the BLUE button. The skipped programme turns to blue.
3. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Repeatedly press the MENU button to return to normal TV viewing.
12
Setting up TV stations
Favourite programme
Station
This function lets you select your favourite programmes directly.
1. Press the MENU button to select the Station menu.
2. Press the G button and then D / E button to select Favourite
programme.
3. Press the G button to display the Favourite programme menu.
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
{
{
{
{
()O}{OOKOMENU
Favourite programme
AutoOprogramme
{
ManualOprogramme {
{
ProgrammeOedit
FavouriteOprogramme {
56n
56n Ca
Ca0
05
5
}{O0_9O()OOKOMENU
1
2
3
4
5
6
7
8
9
4. Press the D / E button to select -- -----.
5. Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric ‘0’ (or
‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.
6. To store another programme, repeat steps 4 and 5.
You can store up to 8 programmes.
7. Press the OK button.
8. Repeatedly press the MENU button to return to normal TV
viewing.
Repeatedly press the FAVOURITE button to select stored favourite
programmes.
0
PR
VOL
OK
VOL
PR
13
Setting up TV stations
Calling the programme table
You can check the programmes stored in the memory by displaying
the programme table.
Displaying programme table
Press the LIST (or BLUE) button to display the Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Station
OOOOCO01
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENU
Note :
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
OK
PR
VOL
Selecting a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST (or BLUE) button to return to normal TV viewing.
14
Picture adjustment
Note: Picture menu options are not available for the RGB input
source.
PSM (Picture Status Memory)
1. Press the MENU button and then D / E button to select the
Picture menu.
2. Press the G button to select PSM.
3. Press the G button and then D / E button to select a picture
Picture
PSM
XD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
()O}{OOKOMENU
Picture
PSM
XD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
Dynamic
Dynamic
Standard
Mild
Game
User
()O}OOKOMENU
setting on the PSM pull-down menu.
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be
changed.
PR
XD
VOL
You can enjoy the vivid and hi-definition picture with LG’s excellent
Digital Reality processor technology.
OK
VOL
PR
1. Press the MENU button and then D / E button to select the
Picture menu.
Picture
PSM
XD
XD
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
On
Off
()O}{OOKOMENU
2. Press the G button and then D / E button to select XD.
3. Press the G button and then D / E button to select On or Off
on the XD pull-down menu.
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture adjustment
Eye (option)
Eye is an optional function. Only a set with eye option can perform
this function.
In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
* button to switch the eye function on or off.
Press the EYE/
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the display
in green does not appear continuously but the display
in yellow appears each time the picture
condition changes.
Note :
a. The eye function is automatically switched off.
b. EYE function is not available for RGB input source.
PR
VOL
OK
VOL
Picture adjustment
PR
You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer.
1. Press the MENU button and then D / E button to select the
Picture menu.
2. Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
Picture
PSM
XD
Contrast
Contrast
Brightness
Colour
Sharpness
{
{
{
{
{
{
{
100
()O}{OOKOMENU
3. Press the G button and then F / G button to make appropriate
adjustments on the each sub menu.
Contrast
80
}{O()OOKOMENU
4. Press the OK button to store it for the picture user.
5. Repeatedly press the MENU button to return to normal TV
viewing.
16
Sound adjustment
SSM (Sound Status Memory)
Sound
You can select your preferred sound setting; Flat, Music, Movie or
Sports and you can also adjust the sound frequency of equalizer.
1. Press the MENU button and then D / E button to select the
Sound menu.
2. Press the G button to select SSM.
3. Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
SSM
Turbo0Sound
AVL
Balance
X-WAVE
{
{
{
{
{
()O}{OOKOMENU
Sound
SSM
Turbo0Sound
AVL
Balance
X-WAVE
{
{
{
{
{
Flat
Flat
Music
Movie
Sports
User
()O}OOKOMENU
Sound Frequency Adjustment
a. Press the G button in User to display the User sub menu.
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly press the MENU button to return to normal TV viewing.
The sound Flat, Music, Movie and Sports are programmed for
good sound reproduction at the factory and cannot be changed.
PR
VOL
OK
VOL
PR
Turbo sound selection
When this function is on, the sound will be more emphasized and
amplified than normal sound.
1. Press the MENU button and then D / E button to select the
Sound menu.
2. Press the G button and then D / E button to select Turbo
Sound
3. Press the G button and then D / E button to select On or off
Sound
SSM
Turbo0Sound
AVL
Balance
X-WAVE
{
{
{
{
{
On
Off
()O}OOKOMENU
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
17
Sound adjustment
Sound adjustment
Sound
SSM
Turbo0Sound
AVL
Balance
X-WAVE
{
{
{
{
{
()O}{OOKOMENU
You can adjust balance, AVL (Auto Volume Leveler), AVL automatically keeps on an equal volume level even if you change programmes. The Turbo sound creates an all around sound as in a
concert hall.
1. Press the MENU button and then D / E button to select the
Sound menu.
2. Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
3. Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
4. Press the OK button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
1
2
3
X-WAVE (Wireless Sound) (option)
4
5
6
You can also listen to the sound through the FM receiver.
7
8
9
0
PR
1. Press the MENU button and then D / E button to select the
Sound menu.
2. Press the G button and then D / E button to select X-WAVE.
3. Press the G button and then D / E button to select Set
Frequency.
4. Press the G button to tune in a frequency on the X-wave menu.
5. Use the number 0 to 9 or press the F / G button to match the
TV’s frequency and the FM receiver’s.
Sound
VOL
OK
PR
VOL
SSM
Turbo0Sound
AVL
Balance
X-WAVE
{
{
{
{
{ SetOFreq {
Off
()O}{OOKOMENU
X-WAVE
88MHz
107MHz
FM95.0MHz
}{0-9OOKOMENU
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more that 5m (16.4ft)
between the TV and FM Receiver.
c. In certain areas, the FM transmitter ability may be weak, such
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
18
Sound adjustment
Sound output selection
In AV mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I/II/ button to select the sound output.
L+R : Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R : Audio signal from audio R input is sent to left and right
loud-speakers.
*
Stereo/Dual reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
Mono
Stereo
Dual
On Screen Display
MONO
STEREO
DUAL I
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
button twice. In mono reception the
mono by pressing the I/II/
depth of sound is improved. To switch back to stereo, press the
I/II/ button twice again.
*
*
Language selection for dual language broadcast
If a programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
*
NICAM reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast by pressing the I/II/ button repeatedly.
*
1. When NICAM mono is received, you can select NICAM
MONO or FM MONO.
2. When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
3. When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time Setting
Setting the clock
Time
Clock
OffOtime
OnOtime
AutoOsleep
{
{
{
{
1. Press the MENU button and then D / E button to select the
Time menu.
2. Press the G button to select Clock.
3. Press the G button and then D / E button to adjust the hour.
Time
Clock
Offotime
Onotime
Autoosleep
()O}{OOKOMENU
{
{
{
{
-i-o:o-i-
()O}{OOKOMENU
4. Press the G button and then D / E button to adjust the minute.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV viewing.
Setting the On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using the on/off
time function.
1. Press the MENU button and then D / E button to select the
Time menu.
2. Press the G button and then D / E button to select Off
time/On time.
3. Press the G button and then D / E button to adjust the hour.
PR
VOL
OK
Time
Clock
Offotime
Onotime
Autoosleep
VOL
{
{
{
{
-i-o:o-i-
Pr 01
Vol 30
Off
PR
()O}{OOKOMENU
4. Press the G button and then D / E button to adjust the minute.
5. Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
6. Press the OK.
7. Repeatedly press the MENU button to return to normal TV viewing.
Note :
a. On time works only in standby mode.
b. To view the remaining on/off time, select the Time menu.
c. When you switch the main power off, the Clock is reset .
Auto sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1. Press the MENU button and then D / E button to select the
Time menu.
2. Press the G button and then D / E button to select Auto sleep.
3. Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV viewing.
20
Other functions
TV and AV modes
Special
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Language
Input
Childolock
Degauss
{
{
{
{
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the ‘Connection of external equipment’ section.
1. Press the MENU button and then D / E button to select the
Special menu.
2. Press the G button and then D / E button to select Input.
3. Press the G button and then D / E button to select TV, AV1, AV2,
AV3, COMPONENT (option) on the Input pull-down menu.
()O}{OOKOMENU
Special
Language
Input
Childolock
Degauss
{
{ TV
{ AV1
{ AV2
AV3
COMPONENT
1
2
3
4
5
6
7
8
9
()O}OOKOMENU
AV1 : VCR connected to the Euro scart socket or AV IN 1 sockets on the set
AV2 : VCR connected to the AV IN 2 sockets on the set.
AV3 : VCR connected to the AV IN3 sockets of the set
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
4. Repeatedly press the MENU button to return to normal TV
viewing.
Alternatively you can select the TV or AV mode by pressing the TV/AV
button.
0
PR
VOL
OK
VOL
In AV mode, to return to TV mode, press the D / E or NUMBER
buttons.
Auto AV switching (option)
PR
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV1 mode when an AV signal is input. But if you want
to keep on watching TV mode, press the D / E or NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1. Press the MENU button and then D / E button to select the
Special menu.
2. Press the G button and then D / E button to select Child lock.
3. Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the panel is pressed while viewing the TV.
21
Other functions
Blue back (option)
Special
Language
Input
Childolock
Degauss
{
{
{
{
If you select On on the Blue back pull-down menu, the blue background appears on the screen when there is no or poor signal.
1. Press the MENU button and then D / E button to select the
Special menu.
2. Press the G button and then D / E button to select Blue back.
3. Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
()O}{OOKOMENU
Tilt (option)
The TV picture may tilt to the left or right if the TV set moves to
another position. This function can be used to compensate the tilt.
1. Press the MENU button and then D / E button to select the
Special menu.
2. Press the G button and then D / E button to select Tilt.
3. Press the G button and then F / G button of the panel control
to adjust the tilt on the Tilt pull-down menu.
On some models, adjust the tilt by using the F / G button of
the remote control handset.
4. Press the OK button.
PR
VOL
OK
5. Repeatedly press the MENU button to return to normal TV
viewing.
VOL
Degaussing
PR
Due to the super large Tube in the set. The colour purity of the picture may be affected by other magnetic influences such as speakers. Stripes may appear on the screen or there may be colour
patches.
1. Press the MENU button and then D / E button to select the
Special menu.
2. Press the G button and then D / E button to select Degauss.
3. Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode automatically.
4. Press the OK or F button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
Note : If you cannot adjust the screen condition by degaussing, try
it again after about 4 minutes.
22
Other functions
Sleep timer
You don’t have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Repeatedly press the SLEEP button to select the number of minutes. The display r- - - will appear on the screen, followed by 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
from the number of minutes selected.
Special
Language
Input
Childolock
Degauss
{
{
{
{
()O}{OOKOMENU
Note :
a. To view the remaining sleep time, press the SLEEP button
once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display r - - - appears.
c. When you switch the set off, the set releases the preset sleep
time.
23
PIP operation (option)
Option :
PIP is an optional function, so that only the set with PIP function
can operate.
PIP (Picture in Picture) displays a picture within a picture.
On and off
Press the PIP button to switch on the sub picture.
Press this button again to switch it off.
Input mode selection for sub picture
Press the INPUT button to select the input mode for the sub picture.
Each time this button is pressed, each input mode for the sub picture is displayed as shown below.
Programme number
COMPONENT (option)
AV1
AV3
AV2
Swapping between main and sub pictures
Press the SWAP button to exchange the main and sub pictures.
Programme selection for sub picture
Press the PR +/- buttons to select a programme for the sub picture.
(In some models, the sub picture programme selection is available
when the sub picture is TV mode.)
Sub picture size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as below.
1/16 size of the main picture
1/9 size
1/2 size (option)
Note : When the sub picture size is 1/2 of the main picture, the picture quality might get poor.
Sub picture freeze
Press the STILL button to freeze motion of the sub picture.
Press this button again to restore motion.
Sub picture position change
Press the POSITION button repeatedly until desired position is
achieved. The sub picture moves clockwise.
24
Teletext (option)
Teletext (or TOP text) is an optional function, therefore only a set
with the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
SIMPLE text
Page selection
1. Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
2. The D / E button can be used to select the preceding or following page.
1
2
3
4
5
6
7
8
9
0
PR
OK
PR
Programming a colour button in LIST mode (option)
Press the M button to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to programme.
3. Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
4. The three other coloured buttons are programmed in the same
way.
25
Teletext (option)
TOP text (option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
1
2
3
4
5
6
7
8
9
FASTEXT
0
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1. Press the i button to select the index page.
2. You can select the pages which are colour coded along the bottom line with the same coloured buttons.
3. Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
4. The D / E button can be used to select the preceding or following page.
PR
26
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
Teletext (option)
Special teletext functions
REVEAL
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
UPDATE
Displays the TV picture on the screen while waiting for the new teletext
page. The display
will appear at the top left hand corner of the
screen. When the updated page is available then the display
will
change to the page number.
Press this button to view the updated teletext page.
1
2
3
4
5
6
7
8
9
0
HOLD
Stops the automatic page change which will occur if a teletext page
consists of 2 or more sub pages. The number of sub pages and the
sub page displayed is, usually, shown on the screen below the time.
When this button is pressed the stop symbol is displayed at the top
left-hand corner of the screen and the automatic page change is
inhibited.
To continue press this button again.
PR
PR
MIX
Displays the teletext pages superimposed on the TV picture.
To switch the TV picture off press this button again.
TIME
When viewing a TV programme, press this button to display the time
at the top right hand corner of the screen. Press this button again to
remove the display. In the teletext mode, press this button to select
a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN, D / E or NUMBER buttons.
Press again to exit this function.
27
Connection of external equipment
You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
What is shown here may be somewhat different from your set.
ANT IN
1
OUT
VIDEO (L/MONO)AUDIO(R)
IN2
AV1
AV2
Aerial socket
VCR
ANT IN
PB
Y
OUT
PR
COMPONENT INPUT(480i)
VIDEO (L/MONO)AUDIO(R)
VIDEO
IN1
(L/MONO)AUDIO(R)
IN2
AV1
AV2
1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the ‘Manual programme tuning’ section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
VCR
Audio/Video in/out sockets (option)
ANT IN
PB
Y
OUT
PR
COMPONENT INPUT(480i)
VIDEO (L/MONO)AUDIO(R)
VIDEO
IN1
(L/MONO)AUDIO(R)
IN2
AV1
AV2
1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT
sockets of the set.
2. If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV1, AV2 or AV3.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
VCR
You can also record programmes received by the TV on video
tape via audio/video out sockets.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VIDEO
L/MONO AUDIO R
VCR
1
Euro scart socket (option)
AV IN3
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV 1 mode automatically. But if you want to keep on watching TV mode, press the
D / E or NUMBER buttons.
Otherwise press the TV/AV button on the remote control
handset to select AV 1 The VCR playback picture appears on
the screen.
You can also record programmes received by the TV on video tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
28
Connection of external equipment
Component in sockets (option)
1. Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COMPONENT INPUT sockets (Y PB PR) on the set.
2. Connect the audio cable from the COMPONENT to AUDIO IN
sockets of AV IN2.
3. Press the TV/AV button to select COMPONENT.
4. Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
ANT IN
PB
Y
OUT
VIDEO (L/MONO)AUDIO(R)
PR
COMPONENT INPUT(480i)
VIDEO
IN1
(L/MONO)AUDIO(R)
IN2
AV1
AV2
COMPONENT
29
Troubleshooting check list
Symptoms
No picture, no sound
Sound OK, poor picture
Picture OK, poor sound
Picture blurred
Lines or streaks in picture
Poor reception on some channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched on
Try another channel (weak signal)
Check aerial (plugged into TV?)
Check aerial (broken lead?)
Check aerial
Check for local interference
Adjust contrast
Adjust brightness
Adjust colour
Adjust volume
Check the batteries in remote control
Check Audio/Video sockets (VCR only)
30
Memo
Download PDF

advertising