LG | 29FX4BLX | LG 29FX4BLX Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
38289U0579A
(CW62A,
124U/V/W/X
TX)
C
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic
8
operation
Programme selection
Volume adjustment / Quick view
On and off /
Mute function
On
On
screen
language
selection
(option)
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning / Fine
10
Picture adjustment
PSM (Picture Status Memory) / XD
Eye (option) / Picture adjustment
16
Sound
18
Setting
Tuning
Programme edit / Favourite programme
Calling the programme table
adjustment
(Sound Status Memory) / Sound adjustment
X-WAVE (Wireless Sound) (option)
SSM
Turbo sound selection
Sound
NICAM
output selection / Stereo/Dual reception
reception (option)
Time
setting
Setting the
Auto sleep
21
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing / Games (option) / Sleep timer
22
PIP
25
operation (option)
Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
On and off /
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
26
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
Component in sockets (option)
29
Troubleshooting
2
check list
31
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
POWER
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
MUTE
1
10
123
Remote control handset
456
Before you use the remote control
teries. See the next page.
2
handset, please install the bat-
789
1.
0
MENU
TV/AV
3
POWER
switches the set
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
11
2.
TV
P
PR
PR
VOL
4
3.
VOL
OK
4.
PR
SWAP
13
TEXT/MIX/
5
select
UT
P
IN
TIME/
SLEEPMODE/ M
POSITION/
PIP
9/4PIP
14
REVEAL/
X
MENU
selects
a menu.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
scans
programmes
F / G
?
STILL/
6
OK
7
FAVOURITE
i
SIZE/
EYE/
accepts your selection
12 5.
9
(With
or
displays
the current mode.
I/II/
8
TELETEXT /
PIP)
6.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
SLEEP
sets the
sleep
timer.
TV
7.
PR
VOL
VOL
OK
PR
Q VIE
W
T
S
LI
.
TEXT/MIX/
5
SLEEPMODE/ M
SIZE/
(With
4
a
R+
-
TIME/
REVEAL/
X
HOLD/
FAVOURITE
EYE/
UPDATE/
INDEX/
i
?
I/II/
TELETEXT / Without
PIP)
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
number.
Location and function of controls
8.
9.
FAVOURITE
selects
a
favorite programme.
EYE/ *
(option)
POWER
switches the eye function
on or
off.
10
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
10. MUTE
switches the sound
on or
MUTE
1
off.
2
11. TV/AV
selects TV or AV mode.
switches the set on from
standby.
exits the Teletext mode.
3
11
12. I/II/ *
selects the
language during dual language
output (option).
broadcast.
PR
selects the sound
OK
VOL
PR
Q VIE
W
T
LIS
.
14. LIST
(or BLUE)
displays the programme
VOL
4
13. Q.VIEW (or YELLOW)
returns to the previously viewed programme.
13
table.
14
9
SLEEP
EYE/
I/II/
12
6
* : No
function
FAVOURITE
8
COLOURED BUTTONS
TELETEXT
models)
or
:
These buttons
are
used for teletext
(only
programme edit.
(Without
TELETEXT /
Battery installation
1
2
3
The remote control handset is
4
5
6
7
8
9
MENU
0
TV/AV
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
PIP)
To load the
-
TV
PR-
PR+
PR
VOL
OK
VOL
PR
SWAP
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
7
SLEEP
SIZE
STILL
PIP
POSITION
9/4PIP
FAVOURITE
(With
INPUT
EYE/
PIP / Without
I/II/
TELETEXT)
5
Location and function of controls
Front
panel
25/29FD6 series
29/32FS2 series
3
MEN U
3
OK
4
4
PR
ON/OFF
1
5
PR
1
4
2
VOL
27
5
29/32FS4 series
25/29FX4 series
3
MENU
OK
4
VOL
1253
4
7
PR
25/29FX5 series
1
ON/OFF
2 5
25/29FA6 series
MENU
1
VOL
1253
3
7
25/29FE6 series
OK
PR
4
4
25
7
25/29FC1 series
MENU
OK
VOL
1234
5
PR
25/29FB3 series
1
25
34
7
ON/OFF
MENU
OK
VOL
PR
VIDEO L/MONO AUDIO R
AV IN3
25/29FD1/4 series
MENU
OK
VOL
PR
125346
1253
4
25/29FA5 series
25/29FB7 series
MENU
1
125
6
3
4
3
VOL
PR
4
OK
2 5
7
7
Location and function of controls
1.
25/29CC2 series
MAIN POWER
(ON/OFF)
switches the set
MENU
OK
VOL
ON/OFF
2.
off.
POWER/STANDBY INDICATOR
illuminates
brightly when
the set is in
dims when the set is switched
12534
25/29FE6 series
3.
4.
3
mode.
a menu.
OK
accepts your selection
4
standby
on.
MENU
selects
125
on or
PR
or
displays
the
current
mode.
25/29FX6 series
F / G (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
5
7
2
selects
a programme or a menu item.
switches the set on from standby.
5.
1
3
4
VIDEO
OK
VOL
L
AUDIO
the
set.
use
: Only use
(When you
function.)
29FB5 series
MENU
REMOTE CONTROL SENSOR
Note
supplied
remote control hand-
others, they'll be
not able to
R
PR
ON/OFF
AV IN3
6.
1
equipment
25/29Q2 series
7.
ON/OFF
MENU
OK
AUDIO/VIDEO IN SOCKETS
VOL
(AV IN3)
Connect the audio/video out sockets of external
7
6
2534
PR
to these sockets.
EYE (option)
adjusts picture according
to the
surrounding
condi-
tions.
1
34
25
7
25/29Q4 series
MENU
OK
VOL
ON/OFF
1
3
Side
PR
VOL
4
25
7
panel
AV IN3
6
VIDEOL/MN
6
AUDIO
VIDEOL/MN
AUDIO
R
AV IN 3
R
6
VIDEOL/MN
AUDIO
R
AV IN3
7
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E TV/AV
or NUMBER buttons on the remote control handset to switch it
,
on
3.
fully.
Press the POWER button
The set reverts to
4.
POWER
MUTE
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
standby
mode.
Press the main power button
PR+
Programme
selection
You
a
can
select
programme number with the D / E
Volume
VOL
PR
SWAP
or
NUMBER
adjustment
adjust
INPUT
the volume.
Q.VIEW (or YELLOW)
Press the Q.View
OK
to switch the set off.
buttons.
PR
VOL
again
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Press the F / G button to
PR-
the remote control handset.
on
you
were
(or YELLOW)
watching.
button to view the last programme
Mute function
Press the MUTE button. The sound is switched off and the
TEXT/MIX/
TIME/
REVEAL/
?
appears.
You can cancel it
On
The
FAVOURITE
PICTURE
I/II/
display
W
screen
menu
language
can
First select your
1.
by pressing
the
MUTE,
F /
G, I/II/ * (option), button.
selection
be
displayed
language.
on
the
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
on screen
Press the OK
4.
8
Repeatedly
viewing.
or
displays
will appear in the selected
F button to select the
Special
language.
menu.
press the MENU button to return to normal TV
On
screen menus
The
an
dialogue between you and your set takes place on screen with
operator menu. The buttons required for the operating steps are
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
the setting of an item in the sub or pull-down menu with
F/Gor D / E
You can move to the higher level menu with OK or F button and
to move to the lower level menu press the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In some models, Tilt, Game, Booster or Degauss will not dis-
4.
Change
.
d.
play.
On
some
models, the Language, X-WAVE will
not
display.
Auto programme
Station
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
()O}{OOKOMENU
Station
()O}{OOKOMENU
MENU
menu
Manual programme
Picture
PSM
{
XD
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{O OKOMENU
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
{
()O}{OOKOMENU
Picture
2
PR
VOL
OK
VOL
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
TurbooSound
{
O1OOCO03OOO6OOSO17
AVL
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
PR
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
()O}{OOKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{O OKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Degauss
{
{
()O}{O OKOMENU
Special
menu
TV programme
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
In
:
some
models up to 200 TV stations
Auto programme
()O}{O OKOMENU
can
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
1
2
3
4
5
6
7
8
9
VOL
OK
VOL
{
I
{
DK
TurboOsearch
{
M
BG
()O}{OOKOMENU
4.
0
PR
{
NormalOsearch
Press the G button. Select
the
on
MENU
System
StorageOfrom
5.
6.
7.
PR
8.
9.
L
BG
:
I
DK
M
:
:
:
:
System pull-down
a
TV system with the D / E button
menu;
SECAM L/L' (option)
PAL B/G, SECAM B/G (Europe / East Europe / Asia / New
Zealand / M.East / Africa /Australia)
PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
(USA / Korea / Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to
begin
auto
programming.
All receivable stations are stored. In some models, the station
name
is stored for stations which broadcast VPS (Video
Programme Service), PDC (Programme Delivery Control) or
TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF
01-69) or S (Cable 01-47), followed by a number.
11.
10
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
Repeatedly press
viewing.
the MENU button to return to normal TV
Setting up
Manual programme
TV stations
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
programme.
3.
Press the
G
button to
display
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
the Manual programme
menu.
4.
Press the D / E button to select
Storage.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
2
{
()O}{OOKOMENU
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
L
: SECAM L/L' (option)
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New
Zealand / M.East / Africa /Australia)
I
: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M
: (USA / Korea / Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
1
2
3
4
5
6
7
8
9
MENU
0
PR
VOL
OK
VOL
PR
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
{
{{{
Stored
16. To store another
17.
Repeatedly
viewing.
station, repeat steps 4 to 15.
press the MENU button to return to normal TV
11
TV stations
Setting up
Station
AutoOprogramme
ManualOprogramme
{
{
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
ProgrammeOedit
FavouriteOprogramme
{
2.
Press the D / E button to select Name.
3.
Press the G button
4.
Press the D button. You
{
and the
()O}{OOKOMENU
alphabet
on
the Name
can use a
5.
6.
your choice of the second
Press the OK button.
Repeatedly
viewing.
can
(option)
models, Booster is
If the
can
perform
reception
opposite direction.
the F / G button and then take
character, and
so on.
press the MENU button to return to normal TV
In
Booster
select in the
pressing
Booster
some
menu.
+, -, the numeric 0 to 9
blank,
A to Z.
With the E button you
Select the position by
7.
pull-down
1 to 3.
an
optional
function.
Only
a
set with
this function.
is poor at the
fringe
area
of TV
signal,
select
Booster to On.
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
1
MENU
4.
Repeat
Press the D / E button to select On
down
PR
VOL
OK
PR
5.
Press the OK button.
6.
Repeatedly
viewing.
VOL
Fine
2.
Off
on
the Booster
pull-
press the MENU button to return to normal TV
tuning
Normally
1
or
menu.
fine
tuning
is
only
necessary if
reception
Repeat the 'Manual programme tuning'
Press the D / E button to select Fine.
steps
is poor.
1 to 3.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
{
{{{
Stored
3.
Press the G button.
4.
Press the F / G button to fine tune for the best
sound on the Fine pull-down menu.
Press the OK button.
5.
6.
12
picture
and
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
TV stations
Setting up
Programme
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
2.
Press the MENU button to select the Station menu.
Press the G button and then D
button
/ E
Programme edit.
to
3.
Press the G button to
menu.
1.
display
the
Programme edit
select
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
edit
Programme
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
a
programme
programme to be deleted with the D / E orF/Gbutton.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Select
Copying
1.
2.
a
a
programme
programme to be copied with the D / E orF/Gbutton.
Press the GREEN button.
All the following programmes are shifted down one position.
Select
1
2
3
4
5
6
7
8
9
MENU
0
a
Moving
1.
2.
a programme
Select a programme to be moved with the D / E
Press the YELLOW button.
or
F / G button.
PR
3.
Move the programme to the desired programme number with
the D / E or F / G button.
4.
Press the YELLOW button
again
OK
VOL
PR
edit
Programme
VOL
to release this function.
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
Move OOff
()}{OOMENU
1.
a programme number
Select a programme number to be
button.
2.
Press the BLUE button. The
Skipping
3.
skipped with
the D / E
or
F / G
skipped programme turns to blue.
again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER butPress the
tons
or
Repeatedly
BLUE
button
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
13
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
TV stations
Favourite programme
{
{
This function lets you select your favourite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
()O}{OOKOMENU
menu.
programme.
3.
Press the G button to
display the Favourite programme
menu.
Favourite programme
1
2
3
4
5
6
8
MENU
0
4.
9
PR
VOL
OK
VOL
FAVOURITE
14
{
{
56n Ca 05
{
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
--
6.
To store another programme, repeat
You can store up to 8 programmes.
7.
Press the OK button.
8.
Repeatedly
viewing.
Repeatedly
steps
4 to 5.
press the MENU button to return to normal TV
press the FAVOURITE button to select stored favourite
programmes.
PR
{
ProgrammeOedit
FavouriteOprogramme
}{O0_9O()OOKOMENU
5.
7
AutoOprogramme
ManualOprogramme
Setting up
TV stations
the programme table
Calling
You can check the programmes stored in the memory
the programme table.
programme table
Press the LIST (or BLUE) button to
by displaying
Displaying
display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Station
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{O OKOMENU
Note
a.
:
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
programme in the programme table
programme with the D / E or F / G button.
Selecting
Select
a
a
VOL
Then press the OK button.
The set switches to the chosen programme number.
OK
VOL
PR
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
Press the LIST
(or BLUE)
button to return to normal TV
viewing.
15
Picture
Picture
adjustment
Note: Picture
PSM
{
XD
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
menu
options
PSM (Picture Status
are
not available for RGB
input source.
Memory)
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button to select PSM.
Press the G button and then D / E button to select
setting on the PSM pull-down menu.
3.
a
picture
Picture
PSM
{
D ynamic
XD
{
Standard
Contrast
{
Mild
Brightness
{
Game
Colour
{
User
Sharpness
{
()O}OOKOMENU
4.
Press the OK
5.
Repeatedly
viewing.
or
F button.
press the MENU button to return to normal TV
The
picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be
changed.
MENU
PR
VOL
OK
VOL
XD
You
PR
can enjoy the vivid and hi-definition picture
Digital Reality processor technology.
with LG's excellent
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button and then D / E button to select XD.
Picture
PSM
XD
{
{
On
Contrast
{
Off
Brightness
{
Colour
{
Sharpness
{
()O}{O OKOMENU
16
3.
Press the G button and then D / E button to select On
on the XD pull-down menu.
4.
Press the OK
5.
Repeatedly
viewing.
or
or
Off
F button.
press the MENU button to return to normal TV
Picture
adjustment
Eye (option)
is
Eye
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the
suitable picture according to the surroundings.
some
ing
models, the
to the
most
Press the EYE/ * button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
display
display
changes.
but the
condition
Note
a.
b.
2.
MENU
PR
:
can
ness
1.
in green does not appear continuappears each time the picture
yellow
The eye function is automatically switched off.
EYE function is not available for RGB input source.
Picture
You
in
VOL
OK
VOL
PR
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
EYE/
Picture
PSM
{
XD
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
100
()O}{O OKOMENU
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
17
Sound
Sound
SSM
SSM
{
Turbo0Sound
{
AVL
{
Balance
{
You
2.
()O}{OOKOMENU
(Sound Status Memory)
3.
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
can
Sports
1.
adjustment
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound Frequency Adjustment
a. Press the G button in User to display the User sub menu.
Sound
SSM
{
Flat
Turbo0Sound
{
AVL
{
Music
Movie
Balance
{
Sports
User
()O}OOKOMENU
b. Select a sound band by pressing the F / G button.
Make appropriate sound level with the D / E button.
c.
MENU
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
d. Press the OK button to store it for the sound User.
PR
press the MENU button to return to normal TV
Repeatedly
VOL
OK
The sound
PR
viewing.
VOL
good
Sound
You
Flat, Music, Movie and Sports
sound
reproduction
at the
factory
are
programmed for
changed.
and cannot be
adjustment
adjust balance, AVL (Auto
ically keeps on an equal volume
Volume Leveler), AVL automatlevel even if you change programmes. The Turbo sound creates an all around sound as in a
concert hall.
1.
2.
3.
4.
5.
can
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
18
Sound
X-WAVE
You
1.
2.
3.
4.
can
2.
3.
Sound
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu.
Match the TV's frequency and the FM receiver's.
Some models
1.
adjustment
are
displayed
as
{
Turbo0Sound
{
AVL
{
Balance
{
()O}{O OKOMENU
shown below.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to select Set
Frequency.
4.
SSM
Press the G button to tune in
a
frequency
on
the X-wave
menu.
5.
Use the number 0 to 9 or press the F / G button to match the
TV's frequency and the FM receiver 's.
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more that 5m (16.4ft)
between the TV and FM Receiver.
c.
In certain areas, the FM transmitter ability may be weak, such
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
MENU
(FM radio).
Turbo sound selection
When this function is on, the sound will be
amplified than normal sound.
1.
2.
more
emphasized
and
PR
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button
to select Turbo
VOL
OK
VOL
PR
Sound
Sound
SSM
{
Turbo0Sound
{
On
AVL
{
Off
Balance
{
()O}OOKOMENU
3.
4.
5.
Press the G button and then D / E button to select On
Press the OK or F button.
Repeatedly
viewing.
or
off
press the MENU button to return to normal TV
19
Sound
Sound
In AV
adjustment
output selection
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II/ * button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal from
speakers.
Audio signal from
loud-speakers.
Stereo/Dual
audio L
input
audio R
is sent to left and
input
right
is sent to left and
loud-
right
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
button twice. In mono reception the
mono by pressing the I/II/ *
depth of sound is improved. To switch back to stereo, press the
I/II/ * button twice again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/ * but-
Language
ton
repeatedly.
DUAL I sends the
primary
broadcast
to the
language
loudspeak-
ers.
DUAL II sends the
secondary
broadcast
language
to the loud-
speakers.
DUAL I+II sends
NICAM
I/II/
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/ * button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
20
a
Time
Setting the
1.
2.
3.
Setting
clock
Time
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
()O}{OOKOMENU
{
()O}{OOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
MENU
T ime
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr
01
Vol
30
PR
VOL
Off
6.
7.
VOL
PR
()O}{O OKOMENU
4.
5.
OK
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
Auto
.
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
21
Other functions
TV and AV modes
Special
Language
Input
{
Childolock
{
Degauss
{
{
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when a video
other equipment is connected to the set.
or
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
()O}{OOKOMENU
Press the MENU button and then D / E
Special
2.
3.
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1, AV2,
AV3, COMPONENT (option) on the Input pull-down menu.
Special
Language
Input
{
{
TV
Childolock
{
AV1
Degauss
{
AV2
AV3
COMPONENT
()O}OOKOMENU
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
4.
AV1 : VCR connected to the Euro scart socket1 or phone jack
of the set
AV2 : VCR connected to the Euro scart socket2 or phone jack
of the set
AV3 : VCR connected to the AV IN3 sockets of the set
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV view-
ing.
Alternatively
you
In AV
to return to TV
can
select the TV
or
AV mode
button.
mode,
mode, press the
by pressing the
TV/AV
D / E or NUMBER but-
tons.
PR
VOL
OK
PR
Auto AV
VOL
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV1 or AV2 mode when an AV signal is input. But if
you want to keep on watching TV mode, press the D / E or NUMBER
buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV view-
ing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
22
Other functions
Blue back
(option)
If you select On
ground appears
on
on
Special
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
Special
4.
Press the OK
5.
Repeatedly
viewing.
3.
5.
F button.
right if the TV set moves to
be used to compensate the tilt.
or
Press the MENU button and then D / E
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt
Tilt
4.
or
()O}{O OKOMENU
press the MENU button to return to normal TV
picture may tilt to the left
position. This function can
Special
2.
{
{
(option)
The TV
another
1.
{
Degauss
button to select the
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Tilt
{
Childolock
menu.
3.
2.
Language
Input
pull-down
on
the
menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
MENU
viewing.
Degaussing
PR
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
VOL
PR
button to select the
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
4.
On mode switches to Off mode.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
5.
OK
menu.
3.
2.
VOL
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
23
Other functions
Games
Special
Language
Input
{
Childolock
{
Degauss
{
{
Game is
an optional function, only a set with game
by using the remote control handset.
function
1.
(option)
Press the MENU button and then D / E
Special
()O}{OOKOMENU
2.
3.
4.
can
perform
this
button to select the
menu.
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
by using
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Repeatedly press the SLEEP button to select the number of minutes. The display
will appear on the screen, followed by 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
-
MENU
TV/AV
-
-
from the number of minutes selected.
Note :
a.
To view the
PR
remaining sleep time,
press the SLEEP button
once.
VOL
OK
VOL
b.
To cancel the
until the
PR
c.
24
-
-
press the SLEEP button
-
When you switch the set
time.
SLEEP
sleep time, repeatedly
display
appears.
off, the
set releases the
preset sleep
PIP
Option
PIP is
operation (option)
:
an
optional function,
can
operate.
PIP
(Picture
in
so
Picture) displays
that
a
only
the set with PIP function
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
Each time this button is pressed, each
displayed as shown below.
input
ture is
Programme
number
AV1
AV2
AV3
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
PR-
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
picture
1/9 size
1/2 size
PR+
picture
(option)
SWAP
Note
ture
:
When the sub picture size is 1/2 of the main
picture,
INPUT
pic-
quality might get poor.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
or
POSITION
STILL
9/4PIP
SIZE
picture.
PIP
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
9
the
4 sub
position
is
picture
This function enables you to search all the stored stations in 4 or 9
sub pictures mode only and see your favorite station by exchanging the main and sub pictures.
Press the 9/4 PIP button to select 4 or 9 sub pictures.
the selected 4 or 9 sub pictures search all the stored stations.
Press the 9/4 PIP button again to switch off these sub pictures.
Only
25
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
1
2
3
4
5
6
7
8
9
0
TV/AV
TV
PR
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXTor TV/AV button to switch off teletext. The previous
mode reappears.
SIMPLE text
Page selection
1.
PR
2.
lowing
TEXT/MIX/
MODE
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
page.
a colour button in LIST mode (option)
Press the MODE button to switch to LIST mode.
Programming
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro-
easily
3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
26
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
1
2
3
4
5
6
7
8
9
0
TOP mode.
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
PR
i
page.
27
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
1
2
Selects double
3
height text.
enlarge the top
button again to enlarge
Press this button to
4
5
6
Press this
7
8
9
page.
Press this button
MENU
0
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
PR
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
PR
the automatic page
Stops
text page consists of 2
TEXT/MIX/
TIME/
REVEAL/
X
?
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
picture off press this button again.
When TV and text picture are displayed half and half
:
of the screen, MIX function is not available.
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
28
again
to exit this function.
RED/GREEN,
D
/ E
or
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
1
OUT
VIDEO
(LMONO)AUDIO(R)
IN2
AV1
AV2
Aerial socket
VCR
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Audio/Video in/out sockets
1.
2.
3.
ANT IN
Y
OUT
VIDEO
PB
COMPONENT
(L/MONO)AUDIO(R)
PR
NPUT(480)
VIDEO
IN1
(L/MONO)AUDIO(R)
IN2
AV1
AV2
VCR
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
AUDIO
OUT
ANT IN
1
(L)
(R)
2
VCR
You
also record programmes received
via audio/video out sockets.
can
tape
by
the TV
on
video
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
ANT IN
PB
Y
OUT
COMPONENT
VIDEO
L/MONO)AUDIO(R)
1.
2.
VCR
VIDEO
L/MON
AUDIO
Otherwise press the TV/AV button on the remote control
handset to select AV 1 or AV 2 The VCR playback picture
appears on the screen.
Note
can
AV2
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV 1 or AV 2 mode
automatically. But if you want to keep on watching TV mode,
press the D / E or NUMBER buttons.
You
(L/MONO)AUDIO(R)
IN2
AV1
Euro scart socket
PR
NPUT(480)
VIDEO
IN1
also record programmes received
by the TV on
video
R
AV IN3
VCR
tape.
:
i.e. the signals red, green and blue can only be
selected for the Euro scart socket. These signals are transmitted,
for example, by a pay TV decoder, game machine or photo CD
a.Signal type RGB,
unit,
ANT IN
1
AUDIO
OUT
(L)
(R)
2
etc.
b.If both Euro scart 1 and 2 sockets have been connected to the
VCRs simultaneously, only the AV1 can be received.
VCR
29
Connection of external
Component
1.
1
2.
3.
4.
ANT IN
Y
OUT
PB
COMPONENT NPU
VIDEO
(L/MONO)AUDIO(R)
VIDEO
IN1
COMPONENT
30
PR
(480)
(L/MONO)AUDIO(R)
IN2
AV1
AV2
in sockets
equipment
(option)
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COMPONENT INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets of AV IN2.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Download PDF