LG | 22LD310 | LG 32LD310 Owner’s Manual

OWNER’S MANUAL
LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ACCESSORIES
■
Image shown may differ from your TV.
Owner's
Manual
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
RA
TIO
Owner’s manual
Owner’s Manual
Batteries
Remote Control
Power Cord
*Lightly wipe any stains or
fingerprints on the surface
of the TV with the polishing
cloth.
Polishing Cloth
Polishing cloth for use
on the screen
This feature is not
available
for all models.
or
Do not use excessive force.
This may cause scratching or
discolouration.
Protection Cover
(Refer to p. 9)
x4
Bolts for stand assembly
(Refer to p.6)
(Only 26/32LD310)
1-Screw for stand fixing
(Refer to p. 8)
(Only 26/32LD310)
Wall Mounting Bracket(Separate purchase)
RW120
RW230
(19/22LD310)
(26/32LD310)
Cable Management Clip
(Refer to p. 7)
(Only 19/22LD310)
AW-47LG30M
(32LD310)
1
CONTENTS
A C C E S S O R I E S .....................................................1
CONTENTS
PREPARATION
Front Panel Controls................................................... 4
Back Panel Information .............................................. 5
Stand Installation..........................................................6
Back Cover for Wire Arrangement........................... 7
Attaching the TV to a desk ........................................8
Positioning your display..............................................8
Swivel Stand ................................................................. 8
Not using the desk-type stand..................................9
Kensington Security System ...................................10
Careful Installation Advice ............................................10
Desktop Pedestal Installation ................................. 11
Wall Mount: Horizontal installation....................... 11
Antenna Connection ................................................ 12
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup .......................................................13
DVD Setup..................................................................... 15
VCR Setup ..................................................................... 17
Other A/V Source Setup........................................... 18
External Stereo Setup ..................................................18
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ..................................20
Turning on the TV....................................................... 22
Installation Guide ........................................................ 22
Programme Selection ................................................. 22
Volume Adjustment......................................................22
On Screen Menus Selection and Adjustment ......23
2
Auto Programme Tuning............................................ 24
Manual Programme Tuning ....................................... 25
Fine Tuning .....................................................................26
Assigning a Station Name ..........................................27
Programme Edit ........................................................... 28
Favourite Programme .................................................. 29
Selecting the Programme List.................................. 30
Key lock.......................................................................... 31
Factory Reset .................................................................32
PICTURE CONTROL
Picture Size (Aspect Ratio)Control .........................33
Preset Picture Settings
- Picture Mode-Preset............................................34
Manual Picture Adjustment
- Picture Mode-User option ............................. 35
Picture Improvement Technology...........................36
Picture Reset..................................................................38
Power Indicator..............................................................38
Screen Setup ................................................................39
- Manual Configure (Adjustment for screen Position) .39
- Initializing (Reset to original factory settings)..............40
SOUND & LANGUAGE CONTROL
Troubleshooting ............................................................55
Maintenance .................................................................57
Product Specifications ................................................58
IR Codes ....................................................................... 59
CONTENTS
Preset Sound Settings - Sound Mode ....................41
Sound Setting Adjustment - User Mode ...............42
Auto Volume Leveler ....................................................43
Balance............................................................................44
Audio Reset....................................................................45
I/II
- Stereo/Dual Reception....................................... 46
- NICAM Reception ....................................................... 47
- Speaker Sound Output Selection.................... 47
On-Screen Menu Language Selection ...................... 48
APPENDIX
TIME SETTING
Clock Setup......................................................................49
Auto On/Off Timer Setting .........................................50
Sleep Timer Setting........................................................51
TELETEXT
Switch On/Off .............................................................52
SIMPLE Text....................................................................52
TOP Text .........................................................................53
FASTEXT .........................................................................53
Special Teletext Functions..........................................54
3
PREPARATION
FRONT PANEL CONTROLS
■
This is a simplified representation of the front panel. Image shown may differ from your TV.
PREPARATION
19/22/26/32LD310
(Only 19/22/26LD310)
POWER INPUT MENU OK
INPUT MENU
OK
VOLUME
PROGRAMME
P
(Only 32LD310)
P
PROGRAMME
VOLUME
Remote Control Sensor
OK
OK
MENU
MENU
INPUT
INPUT
POWER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
4
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
PREPARATION
1
4
3
2
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
AUDIO
COMPONENT IN
VIDEO
ANTENNA
IN
SERVICE ONLY
5
1
2
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
This TV does not support DVI(VIDEO) signal
using DVI to HDMI cable.
3
Audio Output
Connect an external amplifier, or add a subwoofer
to your surround sound system.
4
Audio/Video Input (AV IN)
Connect audio/video output from an external
device to these jacks.
6
7
5
SERVICE ONLY PORT
6
Component Input
Connect a component video/audio device to
these jacks.
7
Antenna Input
Connect RF antenna to this jack.
5
PREPARATION
STAND INSTALLATION
■
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can
tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion
of the tightening part of the bolt.
PREPARATION
Only 26/32LD310
Only 19/22LD310
1
2
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
Assemble the TV as shown.
Cover Base
6
1
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
Only 26/32LD310
Only 19/22LD310
2
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section of the
manual.
Install the C A B L E M A N A G E M E N T C L I P as
shown.
1
Connect the cables as necessary.
2
Open the C A B L E M A N A G E M E N T C L I P as
shown and manage the cables.
To connect additional equipment, see the
External Equipment Setup section of the
manual.
CABLE MANAGEMENT CLIP
3
PREPARATION
1
CABLE MANAGEMENT CLIP
Fit the CABLE MANAGEMENT CLIP as shown.
3
Fit the C A B L E M A N A G E M E N T C L I P as
shown.
How to remove the cable management
clip (Only 19/22LD310)
Hold the CABLE MANAGEMENT
CLIP with both hands and pull it
backward.
! NOTE
G Do
not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
7
PREPARATION
ATTACHING THE TV TO A DESK
POSITIONING YOUR DISPLAY
(Only 26/32LD310)
(Only 19/22LD310)
PREPARATION
■ Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only an
attached screw.
■
Image shown may differ from your TV.
Adjust the position of the panel in various ways for
maximum comfort.
• Tilt range
■
12
0
0
3
1-Screw
(provided as parts of the product)
Stand
SWIVEL STAND
(Only 26/32LD310)
■
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20 degrees
to suit your viewing position.
Desk
! WARNING
G
8
To prevent TV from falling over, the TV should
be securely attached to the floor/wall per
installation instructions. Tipping, shaking, or
rocking the machine may cause injury.
NOT USING THE DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
Only 19/22LD310
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Loose the bolts from TV.
3
4
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Loose the bolts from TV.
3
Detach the stand from TV.
4
Insert the P R O T E C T I O N C O V E R into the TV
until clicking sound.
PREPARATION
1
Only 26/32LD310
Detach the stand from TV.
Insert the P r o t e c t i o n C o v e r into the TV.
PROTECTION COVER
5
Fix the 4 bolts securely using the holes in the
back of the TV.
PROTECTION COVER
9
PREPARATION
KENSINGTON
SECURITY SYSTEM
This feature is not available for all models.
CAREFUL INSTALLATION ADVICE
■
■
Image shown may differ from your TV.
PREPARATION
The TV is equipped with a Kensington Security
System connector on the back panel. Connect the
Kensington Security System cable as shown below.
For the detailed installation and use of the Kensington
Security System, refer to the user’s guide provided
with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and
LCD projectors.
You should purchase necessary components to fix the TV
safety and secure to the wall on the market.
A Position the TV close to the wall to avoid the possibility
of it falling when pushed.
A The instructions shown below are a safer way to set up
the TV, by fixing it to the wall, avoiding the possibility of
it falling forwards if pulled. This will prevent the TV from
falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb
or hang from the TV.
A
NOTE
- The Kensington Security System is an optional
accessory.
NOTES
a. If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so
may produce some temporary distortion effects on
the screen.
1
1
2
2
1
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall.
Match the height of the bracket that is mounted on
the wall.
3
3
Use a sturdy rope to tie the product for alignment. It
is safer to tie the rope so it becomes horizontal
between the wall and the product.
! NOTE
G
G
G
10
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough
to support the size and weight of the TV.
To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.
A
A
The TV can be installed in various ways such as on
a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
A We recommend that you purchase a wall mounting
bracket which supports VESA standard.
A LG recommends that wall mounting be performed
by a qualified professional installer.
A
EARTHING
Should Install wall mount on a solid wall perpendicular to the floor.
G Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
G The surface that wall mount is to be mounted on
should be of sufficient strength to support the
weight of TV set; e.g. concrete, natural rock,
brick and hollow block.
G Installing screw type and length depends on the
wall mount used. Further information, refer to
the instructions included with the mount.
G LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is
used.
- Incorrect fastening of screws to surface which
may cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
G
Power Supply
Circuit breaker
DESKTOP PEDESTALINSTALLATION
For adequate ventilation allow a clearance of 4”
(10cm) all around the TV.
4 inches
4 inches
! NOTE
4 inches
4 inches
PREPARATION
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate
circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
4 inches
WALL MOUNT: HORIZONTAL
INSTALLATION
4 inches
4 inches
4 inches
4 inches
A
B
Model
19/22LD310
26/32LD310
VESA Standard
(A * B)
Screw Quantity
100 * 100 M4
4
200 * 100 M4
4
11
PREPARATION
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
■
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
HDMI/DVI IN
HDMI IN
1
Wall
Antenna
Socket
2
Multi-family Dwellings/Apartments
(Connect to wall antenna
socket) AUDIO
VIDEO
2
AV
PREPARATION
■
RGB IN
■
1
VARIABLE
AUDIO OUT
COMPONENT IN
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
HDMI IN
1
RGB IN
HDMI/DVI IN
2
UHF
AV
Antenna
■
12
AUDIO
Signal
Amplifier
VHF
■
2
VIDEO
1
VARIABLE
AUDIO OUT
COMPONENT IN
ANTENNA
IN
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
EXTERNAL EQUIPMENT SETUP
■
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
Image shown may differ from your TV.
HD RECEIVER SETUP
Connecting with a component cable
1
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
Connect the audio output of the digital set-top
box to the C O M P O N E N T I N A U D I O jacks on
the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
4
Select C o m p o n e n t input source using the
I N P U T button on the remote control.
Signal
Component
480i/576i
O
480p/576p
O
720p
O
1080i/ 1080p
X
VIDEO
AUDIO
SERVICE ONLY
1
2
COMPONENT IN
2
ANTENNA
IN
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the digital set-top box to the C O M P O N E N T I N V I D E O
jacks on the TV.
13
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with a HDMI cable
1
Connect the HDMI output of the digital set-top box to
the H D M I I N jack on the TV.
AV IN
VIDEO L(MONO)
AUDIO
R
2
Select H D M I input source using the I N P U T button on
the remote control.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
G
G
G
G
TV can receive the video and audio signal simultaneously
with using a HDMI cable.
If the digital set-top box supports Auto HDMI function,
the output resolution of the source device will be automatically TV to 1280x720p.
If the digital set-top box player does not support Auto
HDMI, you need to TV the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p .
We recommend less than 10m for HDMI cable.
Signal
HDMI
480i/576i
X
480p/576p
O
720p
O
1080i/ 1080p
X
VIDEO
SERVICE ONLY
1
AUDIO
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
IN
! NOTE
14
AUDIO OUT
DVD SETUP
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the TV.
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
VIDEO
AUDIO
SERVICE ONLY
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t input source using the I N P U T
button on the remote control.
5
Refer to the DVD player's manual for operating
instructions.
1
2
COMPONENT IN
2
ANTENNA
IN
EXTERNAL EQUIPMENT SETUP
IN
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
Component Input ports
To achieve better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
15
EXTERNAL EQUIPMENT SETUP
COMPONENT IN
Connecting with a HDMI cable
1
Connect the HDMI output of the DVD to the
H D M I I N jack on the TV.
AV IN
VIDEO L(MONO)
AUDIO
R
2
3
Select H D M I input source using the I N P U T
button on the remote control.
Refer to the DVD player's manual for operating
instructions.
! NOTE
The TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD player supports Auto HDMI function, the
output resolution of the source device will be automatically TV to 1280x720p.
G If the DVD player does not support Auto HDMI, you
must TV the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
G We recommend less than 10m for HDMI cable.
VIDEO
SERVICE ONLY
1
AUDIO
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
IN
G
16
AUDIO OUT
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF cable
Connect the antenna cable to the A N T I N
socket of the VCR.
DIO
IO
R
COMPONENT IN
2
Connect the A N T O U T socket of the
VCR to the A N T E N N A I N socket on the
TV.
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
L
VIDEO
R
1
ANTENNA
IN
Wall Jack
3
2
Press the P L A Y button on the VCR and
match the appropriate programme
between the TV and VCR for viewing.
EXTERNAL EQUIPMENT SETUP
1
Antenna
Connecting with a RCA cable
V I D E O jacks between TV and VCR.
Connect the A U D I O/V
Match the jack colours (Video = yellow, Audio Left = white, and
Audio Right = red)
1
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
COMPONENT IN
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
2
AUDIO
VIDEO
ANTENNA
IN
CE ONLY
Select A V input source using the I N P U T button on the
remote control.
3
1
! NOTE
G
If you have a mono VCR, connect the audio cable from the VCR
to the A U D I O L / M O N O jack of the TV.
S-VIDEO VIDEO
OUTPUT
SWITCH
L
R
ANT IN
ANT OUT
17
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
1
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
V I D E O jacks between TV
Connect the A U D I O/V
and external equipment. Match the jack colours.
(Video = yellow, Audio Left = white, and Audio Right
= red)
AUDIO
VIDEO
ANTENNA
IN
SERVICE ONLY
2
3
Select A V input source using the I N P U T button
on the remote control.
If connected to A V I N, select A V input source.
1
Operate the corresponding external equipment.
Refer to external equipment operating guide.
VIDEO
L
R
Video Game Set
Camcorder
EXTERNAL STEREO SETUP
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
AUDIO OUT
AV IN
VIDEO L(MONO)
Connect the input jack of the stereo amplifier to the
A U D I O O U T jacks on the TV.
IN
VIDEO
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided with
the amplifier.
! NOTE
G
18
This function works in following mode : TV, AV, Component, HDMI
R
SERVICE ONLY
1
AUDIO
COMPONENT IN
1
AUDIO
Supported Display Resolution
HDMI-DTV mode
Resolution
720x480
Vertical
Frequency(Hz)
59.94
60.00
720x576
31.25
50.00
1280x720
44.96
45
37.50
59.94
60.00
50.00
! NOTE
G
G
G
EXTERNAL EQUIPMENT SETUP
Horizontal
Frequency(kHz)
31.47
31.5
HDMI mode supports PCM audio format only.
If the Audio setting is set to Dolby/DTS/Bitstream in some DVDP/STB, make sure to change the setting
to PCM.
If the resolution of external equipment is over 1280x720p, there will be no picture on the TV.
19
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER Switches the set on from standby or off to standby.
TV Returns to the TV viewing from any mode.
INPUT If you press the button once, the input source OSD will
appear on screen as shown. Press the D / E button and
then OK button to select the desired input source.
WATCHING TV / PROGRAMME CONTROL
20
MUTE Switches the sound on or off.
PSM Recalls your preferred picture setting.
SSM Recalls your preferred sound setting.
I/II Selects the sound output. (G p . 4 6)
0~9 number Selects a programme.
button Selects numbered items in a menu.
RATIO
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/ the system settings to your preference.
Right)
Adjusts the volume.
Selects a programme.
OK Accepts your selection or displays the current mode.
SLEEP Sets the sleep timer.
RATIO Selects your desired picture format.(G p . 3 3)
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) or P r o g r a m m e e d i t.
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section. (G p . 5 2)
RATIO
WATCHING TV / PROGRAMME CONTROL
MENU Selects a menu.(G p . 2 3)
Installing Batteries
■
Open the battery compartment cover on the back side and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
■
Close cover.
21
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
■
In standby mode to turn TV on, press the
button on the TV or press the P O W E R
buttons on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
Installation Guide
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, A u t o T u n i n g.
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. If you close without completing the initial setting, the I n s t a l l a t i o n G u i d e menu can be displayed
again.
PROGRAMME SELECTION
1
Press the D /
E
or N U M B E R buttons to select a programme number.
VOLUME ADJUSTMENT
22
1
Press the
2
If you wish to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the M U T E,
or I/II button.
F
/
G
button to adjust the volume.
F
/
G,
SSM
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
Press the M E N U button and then D /
2
Press the G button and then D /
3
Change the setting of an item in the sub or pull-down menu with F /
You can move to a higher level menu by pressing the O K button.
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DEF G OK MENU
Setup MENU
button to display each menu.
button to select a menu item.
G
button.
Picture
Audio
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
E
DEF G OK MENU
100
100
50
70
70
0
DEF G OK MENU
Audio MENU
Picture MENU
Option
Time
Language
Key Lock
Power Indicator
Factory Reset
Clock
Off Time
On Time
Sleep Timer
DEF G OK MENU
DEF G OK MENU
Option MENU
50
50
0
WATCHING TV / PROGRAMME CONTROL
Setup
E
E
Time MENU
! NOTE
a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it
provides graphical presentation.
b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just
example to help the TV operation.
c. In the teletext mode, menus are not displayed.
23
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Up to 200 TV stations can be stored by programme numbers (0 to 199). Once you
have preset the stations, you will be able to use the D / E or NUMBER buttons to
scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
All stations which can be received are stored by this method. It is
recommended that you use Auto tuning during installation of this TV.
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
S e t u p menu.
2
Press the G button and then D /
T u n i n g.
E
3
Press the G button and then D /
E
4
Press the G button and then D / E button to select a TV
system menu;
BG: PAL B/G, SECAM B/G (Asia / NewZealand / M.East / Africa)
I : PAL I/II (South Africa / Hong Kong)
DK: PAL D/K, SECAM D/K (China / Africa / CIS)
M : (Philippines)
E
button to select the
button to select A u t o
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select S y s t e m.
5
Press the D /
6
Press the F / G button or NUMBER buttons to select the initial programme number.
E
Setup
DEF G OK MENU
1
Setup
AutoTuning
Tuning
Auto
Manual Tuning
Programme Edit
Favourite Programme
To Set
G
button to select S t o r a g e F r o m.
DEF G OK MENU
2
7
8
Press the D /
E
button to select S e a r c h.
Press the G button to begin auto tuning.
All receivable stations are stored.
To stop auto tuning, press the M E N U button.
When auto tuning is complete, the Programme edit menu
appears on the screen. See the Programme edit section to edit
the stored programme.
Auto Tuning
System
Storage From
Search
G
BG
I
DK
M
DEF G OK MENU
3 4 5 6 7
Auto Tuning
9
Press the M E N U button to move to the previous menu
screen.
C 05
5
BG
35%
Menu Stop
24
8
MANUAL PROGRAMME TUNING
Manual Turning lets you manually tune and arrange the stations in
whatever order you desire.
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
M a n u a l T u n i n g.
3
Press the G button and then D /
4
Press the F / G button or NUMBER buttons to select the
desired programme number (0 to 199).
5
Press the D /
6
Press the G button and then D / E button to select a TV
system menu;
BG: PAL B/G, SECAM B/G (Asia / NewZealand / M.East / Africa)
I : PAL I/II (South Africa / Hong Kong)
DK: PAL D/K, SECAM D/K (China / Africa / CIS)
M : (Philippines)
button to select
E button to select S t o r a g e.
button to select S y s t e m.
7
Press the D /
8
Press the G button and then D /
V / U H F or C a b l e.
E
button to select
WATCHING TV / PROGRAMME CONTROL
E
E
E
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select B a n d.
DEF G OK MENU
E
button to select
button to select C h a n n e l.
9
Press the D /
10
Press the G button and then You can select the desired programme number with the F / G button or NUMBER buttons. If possible, select the programme number directly with
the number buttons.
11
Press the D /
12
Press the F / G button to commence searching. If a station is found the search will stop.
E
E
button to select S e a r c h.
13
Press the O K button to store it.
14
To store another station, repeat steps 3 to 1 3.
15
Press the M E N U button to move to the previous menu
screen.
1
Setup
Auto Tuning
Manual
ManualTuning
Tuning
Programme Edit
Favourite Programme
G
To Set
DEF G OK MENU
2
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
G
1
DEF G OK MENU
3 4 5 6 7
8 9 10 11 12
25
WATCHING TV / PROGRAMME CONTROL
FINE TUNING
Normally fine tuning is only necessary if reception is poor.
WATCHING TV / PROGRAMME CONTROL
Setup
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
M a n u a l T u n i n g.
E
E
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
button to select
DEF G OK MENU
1
3
4
Press the G button and then D /
Press the G button and then F /
the best picture and sound.
E
G
button to select F i n e.
Setup
Auto Tuning
Manual Tuning
Tuning
Manual
Programme Edit
Favourite Programme
To Set
G
button to fine tune for
DEF G OK MENU
5
Press the O K button to store it.
2
Manual Tuning
6
Press the M E N U button to move to the previous menu
screen.
Storage
System
Band
Channel
Fine
Search
Name
G
F /G
DEF G OK MENU
3 4 5
26
ASSIGNING A STATION NAME
You can assign a station name up to five characters to each programme number.
2
Press the G button and then D /
M a n u a l T u n i n g.
E
E
Setup
button to select
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DEF G OK MENU
1
3
4
Press the G button and then D /
N a m e.
E
button to select
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
the S e t u p menu.
Setup
Auto Tuning
Manual Tuning
Tuning
Manual
Programme Edit
Favourite Programme
To Set
G
Press the G button and then D / E button. You can use a
blank, + , - , the number 0 to 9 and the alphabet A to Z .
DEF G OK MENU
5
6
7
Press the F / G button to select the position and make
your choice of the second character, and so on.
Press the O K button to store it.
Press the M E N U button to move to the previous menu
screen.
2
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
G
-----
DEF G OK MENU
3 4 5 6
27
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
This function enables you to delete or skip stored programmes.
Also you can move some stations to other programme numbers.
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
P r o g r a m m e E d i t.
3
Press the G button to display the Programme edit menu.
E
E
button to select
button to select
Deleting a programme
1.Select a programme to be deleted with the D / E /
/ G button.
2.Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
A
F
Setup
Moving a programme
1.Select a programme to be moved with the D / E / F / G
button.
2.Press the Green button.
3.Move the programme to the desired programme number with
the D / E / F / G button.
4.Press the Green button again to release this function.
A
Skipping a programme number
1.Select a programme number to be skipped with the D / E /
F / G button.
2.Press the BLUE button. The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will
be unable to select it using the D / E button during normal
TV viewing. If you wish to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DEF G OK MENU
A
1
Setup
Auto Tuning
Manual Tuning
Programme
Programme Edit
Edit
Favourite Programme
G
To Set
DEF G OK MENU
2
4
Press the M E N U button to move to the previous menu
screen.
Programme Edit
0 C 03
1 BLN 03
2 C 12
3 S 66
4 S 67
5
6
7
8
9
S
S
S
C
C
Delete
Move
Skip
69
17
22
09
11
DEF G OK MENU
28
3
FAVOURITE PROGRAMME
This function lets you select your favourite programmes directly.
Repeatedly press the YELLOW button to select stored favourite
programmes.
Press the M E N U button and then D /
S e t u p menu.
2
Press the G button and then D /
F a v o u r i t e P r o g r a m m e.
3
Press the
4
Press the D /
G
E
E
WATCHING TV / PROGRAMME CONTROL
1
button to select the
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
button.
DEF G OK MENU
5
E
button to select - - - - - - - -.
1
Select a desired programme with the F /
BER buttons.
G
button or NUM-
6
To store another programme, repeat steps 4 to 5 .
You can store up to 8 programmes.
7
Press the M E N U button to move to the previous menu
screen.
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Programme
Favourite
G
-----------------
---------------------------------
DEF G OK MENU
2 3 4 5
29
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
A
Displaying programme list
Press the L I S T button to display the P r o g r a m m e L i s t menu.
WATCHING TV / PROGRAMME CONTROL
The programme list appears on the screen.
One programme list contains ten programmes as shown.
! NOTE
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the
programme list indicate there is no station name assigned.
A
Selecting a programme in the programme list
Select a programme with the D / E / F / G button.
Then press the O K button. The TV switches to the chosen
programme number.
A
Paging through a programme list
There are 20 programme table pages in which contain 200 pro
grammes. Pressing the D / E / F / G button repeatedly turns the
pages.
Programme List
0
C 03
5
S 69
1 BLN 03
6
S 17
2
C 12
7
S 22
3
S
66
8
C 09
4
S
67
9
C 11
Press the L I S T button to return to normal TV viewing.
DEF G OK
30
KEY LOCK
The TV can be set so that the remote control is needed to control it.
This feature can be used to prevent unauthorized viewing.
This TV is programmed to remember which option it was last
set to even if you turn the TV off.
1
Press the M E N U button and then D /
the O p t i o n menu.
2
Press the G button and then D /
L o c k.
E
E
button to select
Language
Key Lock
Power Indicator
Factory Reset
button to select K e y
DEF G OK MENU
1
Press the G button and then D /
O f f.
3
E
button to select O n or
Press the M E N U button to move to the previous menu
screen.
4
WATCHING TV / PROGRAMME CONTROL
Option
Option
Language
Key Lock
Power Indicator
Factory Reset
G
Off
On
DEF G OK MENU
2 3
! NOTE
G
G
In K e y L o c k ‘O n’, if the TV is turned off, press the r / I button on the TV or P O W E R buttons on
the remote control.
With the K e y L o c k O n, the display ‘K e y L o c k O n’ appears on the screen if any button on the front
panel is pressed while viewing the TV.
31
WATCHING TV / PROGRAMME CONTROL
FACTORY RESET
Use to quickly reset all the menu options to their original
factory preset values.
This function deletes all TV programmes.
When the F a c t o r y R e s e t is completed, you must
restart the I n s t a l l a t i o n G u i d e.
WATCHING TV / PROGRAMME CONTROL
Option
1
Press the M E N U button and then D /
select the O p t i o n menu.
2
Press the G button and then D /
F a c t o r y R e s e t.
E
button to select
3
Press the G button and then F /
Y e s or N o.
G
button to select
E
button to
Language
Key Lock
Power Indicator
Factory Reset
DEF G OK MENU
4
Press the M E N U button to move to the previous menu
screen.
1
Option
Language
Key Lock
Power Indicator
Factory Reset
To set
G
DEF G OK MENU
2
Factory Reset
Yes
No
F G OK MENU
3
32
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO)CONTROL
You can watch the screen in various picture formats; 1 6 : 9 , O r i g i n a l, 4 : 3, 1 4 : 9,
Z o o m 1, Z o o m 2 and J u s t S c a n.
If a fixed image is displayed on the screen for a long time, that fixed image may
become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using D E button.
This function works in the following signal.
1
You can adjust Aspect Ratio in the Picture menu.
• 16:9
The following selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted DVDs).
• Zoom1
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
Zooml
• Original
When your TV receives a wide screen signal it will
automatically change to the picture format to be
broadcast.
DE
• Zoom2
Choose Zoom 2 when you wish the picture to
be altered, both horizontally extended and
vertically cropped. The picture adopting a
compromise between alteration and screen
converage.
PICTURE CONTROL
16:9
Original
• 4:3
The following selection will allow you to view a picture with an original 4:3 aspect ration, black bars
will appear on both the left and right of the
screen.
Zoom2
DE
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
4:3
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
Just Scan
! NOTE
14:9
DE
G
G
You can only select 4:3,16:9 (Wide) in
Component, HDMI mode.
In HDMI/Component (over 720p)mode, Just
Scan is available.
33
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
Picture Mode adjusts the TV for the best picture appearance. Select the
preset value in the P i c t u r e M o d e menu based on the programme
category.
V i v i d, S t a n d a r d and C i n e m a are programmed for optimum picture
reproduction at the factory and cannot be changed.
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then D /
the P i c t u r e menu.
Press the G button and then D /
P i c t u r e M o d e.
E
E
button to select
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
button to select
E
3
Press the G button and then D /
S t a n d a r d or C i n e m a.
E
100
100
50
70
70
0
DEF G OK MENU
button to select V i v i d ,
1
Picture
4
Press the M E N U button to move to the previous menu
screen.
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
G
E
100
100
50
70
70
0
Vivid
Standard
Cinema
DEF G OK MENU
2 3
34
MANUAL PICTURE ADJUSTMENT
Picture Mode-User Option
Backlight
Contrast
Brightness
Sharpness
1
2
Press the M E N U button and then D /
the P i c t u r e menu.
Press the G button and then D /
P i c t u r e M o d e.
E
E
Picture
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
button to select
E
PICTURE CONTROL
Colour
Tint
To control the brightness of the screen, adjust
the brightness of LCD panel.
Adjusts the difference between light and dark
levels in the picture.
Increases or decreases the amount of white in
the picture.
Adjusts the level of crispness in the edges
between the light and dark areas of the picture.
The lower the level, the softer the image.
Adjusts intensity of all colours.
Adjusts the balance between red and green
levels.
100
100
50
70
70
0
DEF G OK MENU
button to select
1
Picture
3
Press the G button and then D /
S t a n d a r d or C i n e m a.
4
Press the O K button and then D / E button to select the
B a c k l i g h t, C o n t r a s t,
desired picture option (B
B r i g h t n e s s, S h a r p n e s s, C o l o u r and T i n t).
E
button to select V i v i d ,
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
G
100
100
50
70
70
0
Vivid
Standard
Cinema
E
DEF G OK MENU
2 3
Picture
5
6
Press the F /
G
button to make appropriate adjustments.
Press the M E N U button to move to the previous menu
screen.
Aspect Ratio
Picture Mode
• Backlight
Vivid
100
100
50
70
70
0
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
G
E
DEF G OK MENU
4 5
E
• Backlight
100 F
G
E
35
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the
video value according to the special video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to
each video mode, execute the “Picture Reset” function for each
Picture Mode.
E
PICTURE CONTROL
Picture
1
Press the MENU button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
A d v a n c e d.
E
E
button to select
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
• Advanced
button to select
100
100
50
70
70
0
E
DEF G OK MENU
1
4
Press the G button and then D / E button to select
D y n a m i c C o n t r a s t, D y n a m i c C o l o u r, N o i s e
R e d u c t i o n, B l a c k L e v e l, F i l m M o d e or C o l o u r
T e m p e r a t u r e.
Press the M E N U button to move to the previous menu
screen.
Picture
E
3
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
• Advanced
100
100
50
70
70
0
G
To Set
E
DEF G OK MENU
2
Advanced
Dynamic Contrast
Contrast
Dynamic
G
G
Dynamic Colour
Noise Reduction
Off
Low
High
Black Level
Film Mode
Colour Temperature
• Red
• Green
0
E
0
DEF G OK MENU
3
36
■
Adjusts the contrast to keep it at the best level according to the
brightness of the screen. The picture is improved by making bright
parts brighter and dark parts darker.
Dynamic Colour
(Off/Low/High)
■
Adjusts screen colours so that they look livelier, richer and clearer.
This feature enhances hue, saturation and luminance so that red,
blue, green and white look more vivid.
Noise Reduction
(Off/Low/High)
■
Reduces screen noise without compromising video quality.
Dynamic Contrast
(Off/Low/High)
Film Mode
(On/Off)
Colour Temperature
(Cool/Medium/Warm)
• Low :The reflection of the screen gets darker.
• High : The reflection of the screen gets brighter.
■ Set black level of the screen to proper level.
■ This function enables to select ‘Low’ or ‘High’ in the following
mode: RF, AV, Component or HDMI.
■
Makes video clips recorded in film look more natural.
This feature operates only in TV, AV and Component 480i/576i
mode.
PICTURE CONTROL
Black Level
(Low/High)
■
Choose one of three automatic colour adjustments. Set to warm to
enhance hotter colours such as red, or set to cool to see less
intense colours with more blue.
■ You can control red, green, blue to adjust colour details.
37
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
Picture
E
1
Press the M E N U button and then D /
the P i c t u r e menu.
E
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
• Advanced
• Picture Reset
button to select
100
100
50
70
70
0
E
2
Press the G button and then D /
P i c t u r e R e s e t.
E
DEF G OK MENU
button to select
1
Picture
E
PICTURE CONTROL
3
Press the G button to initialize the adjusted value.
4
Press the M E N U button to move to the previous menu
screen.
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
• Advanced
• Picture Reset
100
100
50
70
70
0
G
OK
E
DEF G OK MENU
2 3
POWER INDICATOR
Option
Language
Key Lock
Power Indicator
Factory Reset
It is function to control of IR LED(turn on/off).
1
Press the M E N U button and then D /
select the O p t i o n menu.
E
button to
DEF G OK MENU
1
2
Press the G button and then D /
P o w e r I n d i c a t o r.
E
button to select
Option
Language
Key Lock
Power Indicator
3
Press the G button and then D / E button to select
either S t a n d b y L i g h t or P o w e r L i g h t.
4
Press the G button and then D /
or O f f .
E
button to select O n
To set
G
Factory Reset
DEF G OK MENU
2 3
Power Indicator
5
38
Press the M E N U button to move to the previous menu
screen.
Standby Light
Light
Standby
Power Light
G
Off
On
DEF G OK MENU
4
SCREEN SETUP
Manual Configure (Adjustment for screen Position)
If the picture is not clear and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode when the signal exist
: HDMI, Component
PICTURE CONTROL
Picture
1
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
Press the M E N U button and then use D / E button to
select the P i c t u r e menu.
100
100
50
70
70
0
DEF G OK MENU
1
Picture
3
Press the G button and then use D / E button to select
M a n u a l C o n f i g ..
E
2
Press the G button and then use D / E button to select
S c r e e n.
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
• Advanced
• Picture Reset
100
50
70
70
0
Screen
Screen
To Set
G
DEF G OK MENU
4
Press the G button and then use D / E button to select
H - P o s i t i o n or V - P o s i t i o n.
(When the H-Position and V-Position be changed, Value
may differ from the aspect ratio.)
5
Press the F / G button to make appropriate adjustments.
6
Press the M E N U button to move to the previous menu
screen.
2
Screen
Manual Config.
Reset
G
H-Position
V-Position
50
50
DEF G OK MENU
3 4 5
39
PICTURE CONTROL
Initializing
(Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value
This function works in the following mode when the signal exist
: HDMI, Component
PICTURE CONTROL
Picture
1
2
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
Press the MENU button and then use D / E button to
select the P i c t u r e menu.
Press the G button and then use D / E button to select
S c r e e n.
100
100
50
70
70
0
DEF G OK MENU
1
Press the G button and then use D / E button to select
R e s e t.
4
Press the G button.
Picture
E
3
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
• Advanced
• Picture Reset
Screen
Screen
100
50
70
70
0
To Set
G
DEF G OK MENU
5
Press the M E N U button to move to the previous menu
screen.
2
Screen
Manual Config.
Reset
G
To Set
DEF G OK MENU
3 4
40
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music or
Cinema.
Sound Mode lets you enjoy the best sound without any Special
adjustment as the TV sets the appropriate sound options based
on the programme content.
S t a n d a r d, M u s i c and C i n e m a are preset for optimum sound
quality at the factory and are not adjustable.
1
Press the M E N U button and then D /
the A u d i o menu.
2
Press the G button and then D /
S o u n d M o d e.
E
E
button to select
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
button to select
SOUND & LANGUAGE CONTROL
Audio
DEF G OK MENU
1
3
4
Press the G button and then D /
S t a n d a r d, M u s i c or C i n e m a .
E
button to select
Press the M E N U button to move to the previous menu
screen.
Audio
Sound Mode
Mode
Sound
• Treble
• Bass
• Reset
Auto Volume
Balance
G
50
50
Standard
Music
Cinema
0
DEF G OK MENU
2 3
41
SOUND SETTING ADJUSTMENT -USER MODE
Audio
SOUND & LANGUAGE CONTROL
1
Press the M E N U button and then D /
the A u d i o menu.
2
Press the G button and then D /
S o u n d M o d e.
E
E
button to select
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
button to select
DEF G OK MENU
1
3
4
Press the G button and then D /
S t a n d a r d, M u s i c or C i n e m a .
E
Press the O K button and then D /
T r e b l e or B a s s.
button to select
Audio
Sound Mode
• Treble
E
button to select
• Bass
• Reset
Auto Volume
Balance
Standard(User)
50
50
G
To Set
0
DEF G OK MENU
42
5
Press the F / G button to make appropriate adjustments.
6
Press the M E N U button to move to the previous menu
screen.
2 3 4 5
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume
if you change programmes.
1
2
Press the M E N U button and then D /
the A u d i o menu.
Press the G button and then D /
V o l u m e.
E
E
button to select
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
button to select A u t o
DEF G OK MENU
1
3
4
Press the G button and then D /
or O f f.
E
button to select O n
Press the M E N U button to move to the previous menu
screen.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
G
0
SOUND & LANGUAGE CONTROL
Audio
Off
On
DEF G OK MENU
2 3
43
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to the preferred levels.
SOUND & LANGUAGE CONTROL
Audio
1
Press the M E N U button and then D /
the A u d i o menu.
2
Press the G button and then D /
B a l a n c e.
E
E
button to select
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
button to select
DEF G OK MENU
1
3
4
Press the G button and then F /
desired adjustment.
G
button to make
Press the M E N U button to move to the previous menu
screen.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
Balance
50
50
00 G
DEF G OK MENU
2 3
44
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
1
Press the M E N U button and then D /
the A u d i o menu.
2
Press the G button and then D /
R e s e t.
E
E
button to select
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
button to select
DEF G OK MENU
1
3
4
Press the G button and then O K button
Press the M E N U button to move to the previous menu
screen.
Audio
Sound Mode
• Treble
• Bass
Reset
•• Reset
Auto Volume
Balance
Standard
50
50
G
SOUND & LANGUAGE CONTROL
Audio
To Set
0
DEF G OK MENU
2 3
45
SOUND & LANGUAGE CONTROL
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1
Press the I / I I button to select the M u l t i A u d i o menu.
SOUND & LANGUAGE CONTROL
Broadcast
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved. To switch back to stereo.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
46
On Screen Display
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
2
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M M O N O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or F M M O N O.
Speaker Sound Output Selection
In AV, Component and HDMI mode, you can select output sound for the left and right loudspeakers.
SOUND & LANGUAGE CONTROL
1
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
47
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE SELECTION
The menus can be shown on the screen in the selected language.
SOUND & LANGUAGE CONTROL
48
1
Press the M E N U button and then use D /
O p t i o n menu.
2
Press the G button and then use D /
E
button to select L a n g u a g e.
3
Press the G button and then use D /
desired language.
E
/
4
Press the O K button
5
Press the M E N U button to move to the previous menu screen.
E
F
button to select the
/
G
button to select your
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off time function.
If current time setting is erased by a power failure or the TV is
unplugged, reset the clock.
Time
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D /
C l o c k.
E
E
button to select
Clock
Off Time
On Time
Sleep Timer
button to select
DEF G OK MENU
1
3
Press the G button and then D /
4
Press the G button and then D /
minute.
E
button to set the hour.
E
TIME SETTING
1
Time
Clock
Off Time
On Time
Sleep Timer
G
-- : --
button to set the
DEF G OK MENU
5
Press the M E N U button to move to the previous menu
screen.
2 3 4
49
TIME SETTING
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby
at a preset time.
Two hours after the TV is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
Once the on time/off time is set, these functions operate daily at
the preset time.
The Off time function overrides the On time function if both are
set to the same time.
The TV must be in standby mode for the On time to work.
Time
TIME SETTING
1
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D / E button to select
O n/O
O f f T i m e.
O f f T i m e function, select O f f.
• To cancel O n/O
E
button to select
Clock
Off Time
On Time
Sleep Timer
DEF G OK MENU
1
3
Press the G button and then D /
E
button to set the hour.
4
Press the G button and then D /
minutes.
5
For On Time function only
• P R: Press the G button and then D / E button to select
the programme.
• V o l .: Press the G button and then D / E button to
adjust volume level at switch-on.
6
E
button to set the
Time
Clock
Off Time
On Time
Sleep Timer
G
-- : -Off
DEF G OK MENU
2 3 4
Time
Clock
Off Time
On Time
Sleep Timer
Press the M E N U button to move to the previous menu
screen.
G
-- : -PR
Vol.
On
1
30
DEF G OK MENU
2 3 4 5
50
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you
go to sleep. The sleep timer automatically switches the TV to
standby after the preset time has elapsed.
Time
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D /
T i m e r.
E
E
Clock
Off Time
On Time
Sleep Timer
button to select
button to select S l e e p
DEF G OK MENU
1
Press the G button and then D / E button to set the
O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0).
minute(O
3
TIME SETTING
1
Time
Clock
Off Time
On Time
Sleep Timer
G
Off
Press the M E N U button to move to the previous menu
screen.
4
DEF G OK MENU
2 3 4
! NOTE
G
When you switch the TV off, the TV releases the preset sleep time.
51
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP
and FASTEXT systems. SIMPLE (standard teletext) consists of a
number of pages which are selected by directly entering the
corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
RATIO
Press the T E X T button to switch to teletext. The initial page or
last page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode
reappears.
TELETEXT
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The D / E button can be used to select the preceding or following page.
2
Programming a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding
coloured button on the remote control handset.
1 Press a coloured button.
2 Using the NUMBER buttons, select the page you wish to programme.
3 Press the O K button. The selected page is stored as the selected page number, blinking once to confirm this.
From now on, you can select this page with the same coloured button.
4 The three other coloured buttons are programmed in this way.
52
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the D button can be used.
The red button return to the previous selection. Alternatively the E button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
FASTEXT
A
1
2
3
4
TELETEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
Page selection
Press the i button to select the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
As with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or following page.
53
TELETEXT
SPECIAL TELETEXT FUNCTIONS
A TIME
When viewing a TV programme, press this button to display the time at the top
right hand corner of the screen. Press this button again to remove the display.
In the teletext mode, press this button to select a sub page number. The sub
page number is displayed at the bottom of the screen. To hold or change the
sub page, press the RED/GREEN, D / E or NUMBER buttons.
Press again to exit this function.
A SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
A UPDATE
Displays the TV picture on the screen while waiting for a new teletext page. The
display will appear at the top left hand corner of the screen. When the updated
page is available then display will change to the page number. Press this button
again to view the updated teletext page.
?
TELETEXT
A REVEAL
Press this button to display concealed information, such as solutions to riddles
or puzzles.
Press this button again to remove the information from the display.
i
A INDEX
Select the each index page.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of
2 or more sub pages. The number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When this button is pressed the
stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive. To continue press this button again.
A MIX
Displays the teletext pages superimposed on the TV picture.
To switch the TV picture off press this button again.
54
APPENDIX
TROUBLESHOOTING
The TV does not operate properly
Check to see if there is any object between the TV and the remote control causing an obstruction.
■ Are batteries installed with correct polarity (+ to +, - to -)?
■ Install new batteries.
■
The remote control
does not work
Is the sleep timer set?
Check the power control settings. Has the Power supply been interrupted.
■ The TV goes into Standby mode automatically if no signal is received and no
operation is performed for 15 minutes.
■
Power is suddenly
turned off
■
The video function does not work.
Check whether the TV is switched on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted correctly into the mains?
■ Check your antenna direction and/or location.
■ Test the mains outlet by plugging another TV into the same outlet.
■
■
No picture &
No sound
P i c t u r e a p p e a r s s l o wly after switching on
■
This is normal, the image is muted during the TV startup process. Please contact your
service center, if the picture has not appeared after five minutes.
No or poor colour
or poor picture
Horizontal/vertical
bars or picture shaking
Poor reception on
some channels
Lines or streaks in
pictures
■
APPENDIX
Adjust Colour in menu option.
■ Allow a sufficient distance between the TV and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
■ Check for sources of possible interference.
■
■
■
Check antenna (Change the position of the antenna).
55
APPENDIX
The audio function does not work.
+ ) button.
Press the V O L F or G (or ■ Sound muted? Press M U T E button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK &
No sound
No output from one
of the speakers
Unusual sound from
inside the TV
APPENDIX
56
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Do not to use a wet cloth.
■
Extended Absence
G
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
CAUTION
57
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height x Depth)
with stand
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
APPENDIX
Power requirement
Television System
19LD310-TA
19LD310-LA
22LD310-TA
22LD310-LA
462.4 x 353.0 x 171.0 mm
18.2 x 13.9 x 6.8 inches
533.4 x 397.0 x 171.0 mm
21.0 x 15.6 x 6.7 inches
462.4 x 308.0 x 65.0 mm
18.2 x 12.2 x 2.6 inches
533.4 x 351.7 x 65.0 mm
21.0 x 13.8 x 2.6 inches
3.8 kg / 8.4 lbs
3.6 kg / 8.0 lbs
4.8 kg / 10.6 lbs
4.6 kg / 10.1 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
26LD310
32LD310
26LD310-TA
26LD310-LA
32LD310-TA
32LD310-LA
667.0 x 504.0 x 224.0 mm
26.3 x 19.8 x 8.8 inches
805.0 x 583.0 x 224.0 mm
31.7 x 23.0 x 8.8 inches
667.0 x 446.2 x 80.0 mm
26.3 x 17.6 x 3.1 inches
805.0 x 528.0 x 79.9mm
31.7 x 20.8 x 3.1 inches
8.9 kg / 19.6 lbs
7.8 kg / 17.2 lbs
11.5 kg / 25.4 lbs
10.4 kg / 23.0 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
58
22LD310
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
■
19LD310
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
(Hexa)
Code
Function
Note
Code
Function
0B
INPUT
08
POWER
R/C Button
09
MUTE
R/C Button
R/C Button (Power On/Off)
53
LIST
R/C Button
43
MENU
R/C Button
10 ~ 19 Number Key 0 ~ 9 R/C Button
44
OK
R/C Button
1A
Q.VIEW
R/C Button
72
RED
R/C Button
20
TEXT
R/C Button
71
GREEN
R/C Button
79
RATIO
R/C Button
63
YELLOW
R/C Button
BLUE
R/C Button
02
VOL G
R/C Button
03
VOL F
R/C Button
00
PR D
R/C Button
01
PR E
R/C Button
4D
PSM
R/C Button
52
SSM
R/C Button
0A
I/II
R/C Button
0E
SLEEP
R/C Button
22
MODE
R/C Button
24
MIX
R/C Button
26
TIME
R/C Button
2A
REVEAL
R/C Button
62
UPDATE
R/C Button
64
SIZE
R/C Button
65
HOLD
R/C Button
70
INDEX
R/C Button
0F
TV
R/C Button
Note
APPENDIX
61
(Hexa)
59
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Model :
Serial No. :
Download PDF

advertising