LG | 32LN5100 | LG 32LN5100 Owner’s Manual

OWNER’S MANUAL
*
LED TV
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LN510*
LN511*
LN512*
LN513*
LN515*
LN49**
P/NO : MFL67710802 (1305-REV03)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
SAFETY INSTRUCTIONS
8
INSTALLATION PROCEDURE
35
35
36
38
40
40
41
Customizing Settings
- SETUP Settings
- PICTURE Settings
- AUDIO Settings
- TIME Settings
- OPTION Settings
- LOCK Settings
8
ASSEMBLING AND PREPARING
8
10
11
12
12
13
15
16
17
18
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
- Attaching the shelf stand
- How to attach to masonry walls
Tidying cables
41
TELETEXT
41
41
41
42
42
42
42
Switch On/Off
Simple Text
- Page selection
- Programming a colour button in LIST
mode
Fastext
- Page selection
Special Teletext Function
19
MAKING CONNECTIONS
43
MAINTENANCE
19
20
20
21
21
22
22
Antenna connection
HDMI connection
Component connection
Composite connection
USB connection
Audio System connection
- External Stereo Connection
43
43
43
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
43
TROUBLESHOOTING
23
REMOTE CONTROL
44
SPECIFICATIONS
24
WATCHING TV
47
LICENSES
24
24
24
24
25
26
26
26
26
27
Turning the TV on for the first time
Watching TV
Managing programmes
- Automatically setting up programme
- Manually setting up programme
- Editing your programme list
- Selecting a programme on the
programme list
Using additional options
- Adjusting aspect ratio
- Using the input list
28
ENTERTAINMENT
28
29
30
31
32
34
Connecting USB storage devices
Browsing files
Viewing photos
Listening to music
Viewing movies
DivX® VOD Guide
35
CUSTOMIZING TV SETTING
35
Accessing main menus
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you
may be slightly injured or the product
may be damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and/or remote control
in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a
bathroom
--Near any heat source such as stoves
and other devices that produce heat
--Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
yyDo not place the product where it might be
exposed to dust.
This may cause a fire hazard.
yyMains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
yyDo not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
yyMake sure to connect Mains cable to
compliant AC mains socket with Grounded
earth pin. (Except for devices which
are not grounded on earth.) Otherwise
possibility you may be electrocuted or
injured.
yyInsert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
yyEnsure the power cord does not come into
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.
yyDo not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or electric
shock.
yyBend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside the
Product and could give an electric shock.
yyWhen mounting TV onto wall make sure to
neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.
yyDo not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
ENGLISH
ENG
SAFETY INSTRUCTIONS
3
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyDo not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
yyKeep the anti-moisture packing material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
yyDo not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
yyDispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
yyDo not insert any metal objects/conductors
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not
touch the power cable right after plugging
into the wall input terminal. You may be
electrocuted. (Depending on model)
yyDo not put or store inflammable
substances near the product. There is a
danger of combustion/explosion or fire due
to careless handling of the inflammable
substances.
yyDo not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service centre.
yyDo not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric shock
accident can occur.
yyDo not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
yyNever touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.
yyNever touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
yyDo not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
SAFETY INSTRUCTIONS
yyUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
yyApparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
yyIf you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.
yyIf you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of the
product. When you install the set to use
the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
yyOnly use the attachments / accessories
specified by the manufacturer.
yyWhen installing the antenna, consult
with a qualified service technician. If not
installed by a qualified technician, this
may create a fire hazard or an electric
shock hazard.
yyWe recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
CAUTION
yyInstall the product where no radio wave
occurs.
yyOnly use the specified type of battery.
This could cause damage to the remote
control.
yyThere should be enough distance between
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.
yyDo not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
yyDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
yyBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight , open fireplace and
electric heaters.
yyDo not place non-rechargeable batteries
in charging device.
yyMake sure there are no objects between
the remote control and its sensor.
ENGLISH
ENG
yyIf any of the following occur, unplug the
product immediately and contact your
local service centre.
--The product has been impacted by
shock
--The product has been damaged
--Foreign objects have entered the
product
--The product produced smoke or a
strange smell
This may result in fire or electric shock.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
yySignal from Remote Control can be
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this
occurs turn off lighting or darken viewing
area.
yyWhen connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
yyDo not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
yyPlease follow the installation instructions
below to prevent the product from
overheating.
--The distance between the product and
the wall should be more than 10 cm.
--Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or
cushion.
--Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
yyTake care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
yyPeriodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
yyPrevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
yyProtect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
yyDo not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.
yyAvoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.
yyWhen cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
yyAs long as this unit is connected to the AC
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.
SAFETY INSTRUCTIONS
yyWhen moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
yyWhen moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
yyContact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
yyRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
yyIf the product feels cold to the touch, there
may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with product.
yyThe panel is a high technology display
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel.
This does not indicate a malfunction and
does not affect the performance and
reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
yyYou may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
yyDisplaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene
from a video game) for a prolonged
time may cause damage to the screen,
resulting in retention of the image, which
is known as image sticking. The warranty
does not cover the product for image
sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more hours
for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.
ENGLISH
ENG
yyWhen unplugging the cable, grab the plug
and unplug it, by pulling at the plug. Don’t
pull at the cord to unplug the power cord
from the power board, as this could be
hazardous.
7
8
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you
are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
9
ENGLISH
ENG
ocal
al
ASSEMBLING AND PREPARING
Remote control and
batteries (AAA)
(See p.23)
Owner’s manual
Cable holder
(Depending on model)
(See p.18)
Power Cord
Stand Screws
3EA, P5 x 25
4EA, M4 x 14
(Only LN510*, LN511*,
LN512*, LN513*, LN49**)
(See p.12)
Stand Screws
4EA, P5 x 25
4EA, M4 x 14
(Only LN515*)
(See p.12)
Stand Rack Screws
3EA, M4 x 8
(Only LN515*)
(See p.16)
Desk-mount Screw
1EA
(See p.13)
Wall Plate
(Only LN515*)
(See p.16)
Wall mount screws
3EA, P5 x 69.5
(Only LN515*)
(See p.16)
Wall mount anchors
3EA
(Only LN515*)
(See p.17)
Stand Body /
Stand Base
(Only LN510*, LN511*,
LN512*, LN513*, LN49**)
(See p.12)
m
B
Stand Body /
Stand Base
(Only LN515*)
(See p.12, 16)
10 ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
Screen
OK
SETTINGS
INPUT
Remote control sensor
Power indicator
buttons
Speakers
Button
Description
Scrolls
H
through
the saved programmes.
H
Adjusts
the volume level.
H
S
H
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
ASSEMBLING AND PREPARING 11
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe
transportation regardless of its type and size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ENGLISH
ENG
Lifting and moving the TV
12 ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
LN515*
Image shown may differ from your TV.
1
Stand Body
Attaching the stand
LN510*, LN511*, LN512*, LN513*, LN49**
1
3EA
P5 x 25
Stand Base
2
Stand Body
4EA
Stand Base
P5 x 25
3
2
4
3
4EA
4EA
M4 x 14
M4 x 14
Securing the TV to a table
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
To secure the TV to a table, insert and tighten
the supplied screw on the rear of the stand.
NOTE
yy Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
-- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
ENGLISH
ENG
ody
ASSEMBLING AND PREPARING 13
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
yy Make sure that children do not climb on
or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
WARNING
yy If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
»» Using cabinets or stands
recommended by the manufacturer
of the television.
»» Only using furniture that can safely
support the television.
»» Ensuring the television is not
overhanging the edge of the
supporting furniture.
»» Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
»» Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
»» Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
Using the Kensington security system
(This feature is not available for all models.)
The Kensington security system connector
is located at the rear of the TV. For more
information of installation and using, refer to the
manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
ASSEMBLING AND PREPARING 15
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
10 cm
10 cm
CAUTION
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
32LN510*,
32LN511*,
32LN512*,
32LN513*,
32LN515*
32LN49**
39/42LN510*,
39/42LN511*,
39/42LN512*,
39/42LN513*
VESA (A x B)
Standard
screw
Number of
screws
Wall mount
bracket
200 x 100
M4
200 x 200
M6
4
4
LSW130B
LSW230B
MSW240
Wall mount bracket
LSW130B
LSW230B
A
B
MSW240
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
NOTE
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ENGLISH
ENG
Mounting on a wall
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Attaching the shelf stand
4
Image shown may differ from your TV.
- You can use the shelf stand by putting STB (Set
top box).
LN515*
Stand Body
1
5
Stand Base
1EA
2
2EA
M4 x 8
M4 x 8
CAUTION
NOTE
yy To install wall mount anchor, you can
refer to p.17.
3
Wall Plate
3EA
P5 x 69.5
yy Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the
Stand may tilt after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
ASSEMBLING AND PREPARING 17
ENGLISH
ENG
1
2
mm
150
350mm
Wall mount anchor
Shelf Stand
STB
(Set top box)
3
Shelf Stand conditions of use
STB Dimensions (W x D) 350mm x 150mm
STB Weight
2.5kg
Maximum supported
3.5kg
weight
4
Wall mount screw
How to attach to masonry
walls
5
(This feature is not available for all models.)
Use
the anchors for wall material of concrete,
light concrete, strong natural stone, soft natural
stone masonry brick and hallow block that do not
crack.
Please follow the below direction
- Check the material of the wall and the thickness
of the finishing.
- When installing the product on wall material
not designated, install the product so that each
fixated location can withstand the pull out load
of 70 kgf (686 N) and shear load of 100 kgf (980
N) or above.
- Use the Ø8 mm drill bit for concrete and
hammer (Impact) drill.
6
1 Use a drill bit Ø8 mm to drill a hole for the
anchor location within a depth of 80 mm 100 mm.
2 Clean the drilled hole.
3 Insert the sealed anchor to the hole. (When
inserting the anchor, use a hammer.)
4 Set the wall mount on the wall by aligning to
the location of the hole. and, set the angle
adjusting part to face upward.
5 Align the wall mount bolt to the hole and
tighten it. Then, fasten the bolts at torque of
45 kgf/cm - 60 kgf/cm.
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
Use Cable Holder to neatly secure and position
cables together.
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holders may break,
and injuries and damage to the TV may
occur.
MAKING CONNECTIONS 19
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
This section on MAKING CONNECTIONS
mainly uses diagrams for the LN510* models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, gaming devices, and other
external devices.
ANTENNA
IN
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV programme on a
DVD recorder or VCR, make sure to
connect the TV signal input cable to the
TV through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
yy Refer to the external equipment’s manual
for operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
NOTE
yy Use a signal splitter to use more than 2
TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yy An antenna cable and converter are not
supplied.
ENGLISH
ENG
MAKING CONNECTIONS
20 MAKING CONNECTIONS
ENGLISH
ENG
HDMI connection
Component connection
Transmits the digital video and audio signals
from an external device to the TV. Connect the
external device and the TV with the HDMI cable
as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
Transmits analogue video and audio signals
from an external device to the TV. Connect the
external device and the TV with a component
cable as shown.
IN
1
RED
WHITE
RED
BLUE
GREEN
2
(*Not
Provided)
DVD/ Blu-Ray / HD Cable
Box / HD STB
L
HDMI
VIDEO
RED
WHITE
RED
BLUE
GREEN
(*Not
Provided)
R
AUDIO
NOTE
yy It is recommended to use the TV with
the HDMI connection for the best image
quality.
yy Use the latest High Speed HDMI™
Cable.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p.
yy Supported HDMI Audio format : Dolby
Digital(Up to 48kHz), PCM(Up to 192kHz,
32kHz/44.1kHz/
48kHz/88kHz/96kHz/176kHz/192kHz)
*DTS Not Supported.
DVD/ Blu-Ray / HD Cable Box
NOTE
yy If cables are not installed correctly, it
could cause this image to display in black
and white or with distorted colours.
MAKING CONNECTIONS 21
USB connection
Transmits analogue video and audio signals
from an external device to the TV. Connect the
external device and the TV with the composite
cable as shown.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
USB menu to use various multimedia files.
USB IN
AV IN 2
AUDIO OUT
USB
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
DVD/ Blu-Ray / HD Cable Box / VCR
(*Not Provided)
ENGLISH
ENG
Composite connection
22 MAKING CONNECTIONS
ENGLISH
ENG
Audio System connection
Use an external audio system instead of the
built-in speaker.
NOTE
yy If you use an optional external audio
device instead of the built-in speaker, set
the TV speaker feature to off.
External Stereo Connection
Use to connect to an external amplifier, or surround sound system.
AUDIO OUT
AV IN 2
(*Not Provided)
L
R
AUDIO IN
External Stereo
REMOTE CONTROL 23
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the
and
ends to the label inside the compartment, and close
the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyIn Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
(POWER) Turns the TV on or off.
TV Returns to the TV viewing from any mode.
TV
INPUT
Q.MENU
PICTURE
1
4
7
LIST
SOUND
2
5
8
0
3
6
9
Q.VIEW
Q.MENU Accesses the Quick menus.
PICTURE Changes the image mode.
SOUND Changes the sound mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
I/II Selects the sound output.
MUTE
FAV
P
TIME
REVEAL
UPDATE
HOLD
SETTINGS
Adjusts the volume level.
P
MUTE
1
PAGE
TEXT
INDEX
Scrolls through the saved programmes.
Moves to the previous or next screen.
SETTINGS Accesses the main menus.
Navigation buttons(up/down/left/right) Scrolls through
menus or options.
OK
EXIT
Mutes all sounds.
BACK
Selects menus or options and confirms your input.
Returns to the previous level.
EXIT Clears on-screen displays and return to TV viewing.
1 TELETEXT BUTTONS These buttons are used for teletext.
Control buttons (
) Controls the USB menus.
Coloured buttons These access special functions in some
menus.
(
: Red,
: Green,
: Yellow,
: Blue)
ENGLISH
ENG
REMOTE CONTROL
24 WATCHING TV
ENGLISH
ENG
WATCHING TV
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet. The
Power indicator turns red and the TV switches
to Standby mode.
2 In Standby mode, press the power button on
the remote control or local key to turn the TV
on. The Initial setting screen appears if you
turn the TV on for the first time.
NOTE
yy You can also access Initial Setting by
accessing OPTION in the main menu.
3 Follow the on-screen instructions to
customize your TV settings according to
your preferences.
Menu Language Selects a language to
display.

Selects Home
Mode Setting
Use for the home

environment.
Sets the time.
Time Setting

Auto Tuning
Scans and saves
available programmes
automatically.
NOTE
yy To display images in the best quality for
your home environment, select Home Use.
yy Store Demo is suitable for the retail
environment.
yy If you select Store Demo, any customized
settings will switch back to the default
settings of Store Demo in 5 minutes.
4 When the basic settings are complete,
press the OK.
NOTE
yy If you do not complete the Initial setting, it will
appear whenever the TV turns on.
yy Disconnect the power cord from the power
outlet when you do not use the TV for a long
period of time.
5 To turn the TV off, press the power button
on the remote control.
Watching TV
1 In Standby mode, press
(POWER) to
turn the TV on.
2 Press INPUT and select TV.
3 To turn the TV off, press
(POWER).
The TV switches to Standby mode.
Managing programmes
Automatically setting up programme
Use this to automatically find and store all available programmes.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP and press OK.
2 Press the Navigation buttons to scroll to
Auto Tuning and press OK.
3 Press the Navigation buttons to scroll to
To Start and select To Start to begin auto
tuning. The TV scans and saves available
programmes automatically.
4 When you return to the previous menu,
press BACK ꕣ.
WATCHING TV 25
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Storage.
4 Press the Navigation buttons or Number
buttons to select the desired programme
number.
5 Press the Navigation buttons to scroll to
System.
6 Press the Navigation buttons to scroll to
TV System.
7 Press the Navigation buttons to scroll to
Band.
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons to scroll to
Channel.
10 Press the Navigation buttons and then
select the desired channel number with the
Navigation buttons or Number buttons.
11 Press the Navigation buttons to scroll to
Search.
12 Press the Navigation buttons to scroll and
start Searching.
13 Press the OK to store it.
14 When you return to the previous menu,
press
BACK ꕣ.
NOTE
o store another programme, repeat steps
yy T
3 to 13.
Assigning a station name
You can assign a station name with five
characters to each programme number.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Name.
4 Press the Navigation buttons to scroll to
select the position and make your choice of
the second character, and so on. You can
use an the alphabet A to Z, the number 0 to
9, +/ -, and blank and press OK.
5 Press the OK to store it.
6 When you return to the previous menu,
press
BACK ꕣ.
Fine Tuning
Normally fine tuning is only necessary if
reception is poor.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Fine.
4 Press the Navigation buttons to fine tune for
the best picture and sound.
5 Press the OK to store it.
6 When you return to the previous menu,
press BACK ꕣ.
ENGLISH
ENG
Manually setting up programme
26 WATCHING TV
ENGLISH
ENG
Editing your programme list
Using additional options
When a programme number is skipped, it means
that you will be unable to select it using P
button during TV viewing.
If you wish to select the skipped programme,
directly enter the programme number with the
NUMBER buttons or select it in the Programme
edit menu.
This function enables you to skip the stored
programmes.
Adjusting aspect ratio
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Programme Edit.
3 Edit programmes using the following
buttons.
Button
Red button
Yellow button
Blue button
Description
Deletes a programme.
Press the Red button twice.
The selected programme
is deleted, all the following
programmes are shifted up
one position.
Moves a programme.
Press the Yellow button again
to release this function.
Selects a programme number
to be skipped. Press the Blue
button again to release the
skipped programme.
Resize an image to view at its optimal size by
pressing Q.MENU or accessing Aspect Ratio in
the PICTURE menu.
NOTE
yy The available ratio varies depending on the
input source.
-
16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the
original size without removing parts of the
edge of the image. (This function works
in Component/HDMI (720P/1080i/1080p)
Mode.)
4 When you return to the previous menu,
press BACK ꕣ.
Selecting a programme on the
programme list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to
desired programme and press OK.
3 When you return to the previous menu,
press LIST.
NOTE
ou may find some blue programmes.
yy Y
They have been set up to be skipped by
auto programming or in the programme
edit mode.
yy Some programmes with the programme
number shown in the programme
list indicate there is no station name
assigned.
NOTE
yy If you select Just Scan, you may see
image noises at the edge of the original
signal.
-
Original: When your TV receives a wide
screen signal it will automatically change to
the picture format broadcasted.
(4:3 → 4:3)
(16:9 → 16:9)
WATCHING TV 27
ard 4:3.
Using the input list
ENGLISH
ENG
- 4:3: Resizes images to the previous stand-
Selecting an input source
1 Press INPUT to access the input sources.
-The connected device displays on each
input source.
-
14:9 : You can view a picture format of 14:9
or a general TV programme in the 14:9
mode. The 14:9 screen is viewed in the
same way as in 4:3, but is moved to the up
and down.
2 Press the Navigation buttons or input button
to scroll to one of the input sources and
press OK.
yyImage shown may differ from your TV.
INPUT
-
-
Zoom : Formats an image to fit the screen
width. The top and bottom of the image may
not appear.
Cinema Zoom 1 : Formats an image to the
cinemascope ratio, 2.35:1.
To change the ratio of the cinema zoom,
press < or > and its range is from 1 to 16.
NOTE
yy If you enlarge or reduce an image, the
image may be distorted.
Move
OK
Move
TV
AV1
AV2
Component
HDMI1
HDMI2
Input source
TV
Description
Watch TV over the air and
cable broadcast.
AV
Watch video from a VCR or
other external devices.
Component
Select it when using the DVD
or the Digital set-top box
depends on connector.
Watch video from a HTS or
other high definition devices.
HDMI
OK
28 ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
(Depending on model)
yyImage shown may differ from your TV.
Connecting USB storage
devices
Connect USB storage devices (external HDD,
USB memory) to the TV and use multimedia
features (See “Browsing files” on p.29).
Connect a USB flash memory or USB memory
card reader to the TV as shown on the following
illustration.
USB IN
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to
Eject and press OK.
3 Disconnect the USB storage device only
when the message says that it is safe to
remove.
CAUTION
yyDo not turn the TV off or remove a USB
storage device while the USB storage
device is connected to the TV, as this
could result in loss of files or damage to
the USB storage device.
yyBack up your files saved on a USB
storage device frequently, as you may
lose or damage the files and this may
be not covered by the manufacturer’s
warranty.
Tips for using USB storage devices
yy Only a USB storage device is recognizable.
yy If the USB storage device is connected
through a USB hub, the device is not
recognizable.
yy A USB storage device using an automatic
recognition programme may not be
recognized.
yy A USB storage device which uses its own
driver may not be recognized.
yy The recognition speed of a USB storage
device may depend on each device.
yy Please do not turn off the TV or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy Please do not connect the USB storage
device which was artificially manoeuvred on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yy Please use only a USB storage device which
was formatted as a FAT16, FAT32, NTFS file
system.
yy Please connect a USB storage device with
the cable offered by the device maker.
yy Some USB storage devices may not be
supported or operated smoothly.
yy Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
yy If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy If the USB memory device does not work
properly, disconnect and reconnect it.
yy How fast a USB memory device is detected
differs from device to device.
yy The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy Any device with more than the recommended
capacity may not work properly.
yy USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy Maximum of 999 folders or files can be
recognized under one folder.
yy If there are a lot of folders or files all within
one folder, the device may not be able to
access these properly.
yy For external USB HDDs, it is recommended
that you use devices with a rated voltage of
less than 5 V and a rated current of less than
0.5A.
ENTERTAINMENT 29
No.
Access the photo, music, or movie lists and
browse files.
1 Connect a USB storage device.
2 Press SETTINGS to access the main
menus.
3 Press the Navigation buttons to scroll to
USB and press OK.
4 Press Navigation buttons to scroll to
PHOTO LIST, MUSIC LIST or MOVIE LIST
and press OK.
1
2
3
4
5
6
Description
Moves to the upper level folder.
Preview: Displays the thumbnail/folder
name of the file in the selected folder.
Current page/Total pages
Total number of marked files
Contents under the folder focused on 1
Available buttons on the remote control
Supported file format
Type
Photo
PHOTO LIST MUSIC LIST
3
PHOTO LIST
DriveA
Music
USB Device
No Marked
Free Space 4 GB
Up Folder
2
3872x2592, 2604KB
1
4
Page 1/1
GUU.JPG
Up Folder
MOVIE LIST
KY103
09/15/2012
KY101
04/03/2012
KY104
10/12/2012
KY102
09/03/2012
KY105
11/27/2012
GUU
11/27/2012
JMJ005
11/27/2012
JMJ002
11/27/2012
JMJ006
11/27/2012
JMJ003
11/27/2012
JMJ007
11/27/2012
JMJ004
11/27/2012
JMJ008
ꔂ Move
ꔉ PopUp Menu
4
Page 1/1
USB Device
No Marked
DriveA
Free Space 4 GB
Title
Duration
5
2
ꕗ
1
6
Exit
3
MUSIC LIST
11/27/2012
ꔵ Move Page
ꘂ Mark
5
00:00 / 01:34
Up Folder
ꔉ PopUp Menu
ꔂ Move
꘩ Option
ꘂ Mark
3
MOVIE LIST
Top Folder
DriveA
6
ꔵ Move Page
Exit
4
Page 1/1
USB Device
No Marked
Free Space 4 GB
Title
Duration
DriveA
5
2
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.
tp/*.vob/*.mp4/*.mov/*.mkv/*.divx/*.
avi/*.asf/*.wmv/*.flv/*.avi(motionjpeg)/*.
mp4(motion-jpeg)/*.mkv(motionjpeg)/*.rm/ *.rmvb)supporting file
Video format : DivX3.11, DivX4.x,
DivX5.x, DivX6, Xvid1.00, Xvid1.01,
Xvid1.02, Xvid1.03, Xvid1.10 beta-1/
beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/
AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital,
Mpeg, MP3, LPCM, ADPCM, WMA
Bit rate : within 32 kbps to 320
kbps(MP3)
4 folder(s), 2 file(s)
1
Movie
Supported file format
JPEG
Baseline : 64 x 64 to 8192 x 8192
Progressive : 64 x 64 to 1024 x 768
yyYou can play JPEG files only.
yyNon-supported files are
displayed in the form of
predefined icon.
MP3
Bit rate 32kbps to 320kbps
yySampling rate MPEG1 Layer3
: 32 kHz, 44.1 kHz, 48 kHz
yySampling rate MPEG2 Layer3
: 16 kHz, 22.05 kHz, 24 kHz
yySampling rate MPEG2.5
Layer3 : 8 kHz, 11.025 kHz,
12 kHz
DAT,MPG,MPEG,VOB,AVI,DIVX,MP
4,MKV,TS,TRP,TP,ASF,WMV,FLV,R
M,RMVB)
Up Folder
ꔂ Move
ꘂ Mark
ꔉ PopUp Menu
ꔵ Move Page
Exit
6
External Subtitle format :
*.smi/*.srt/*.sub(MicroDVD,Su
bviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only,
XSUB (It is the subtitle format used
in DivX6 files)
ENGLISH
ENG
Browsing files
30 ENTERTAINMENT
ENGLISH
ENG
Viewing photos
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
1 Press SETTINGS to access the main
menus.
2 Press the Navigation buttons to scroll to
USB and press OK.
3 Press the Navigation buttons to scroll to
PHOTO LIST and press OK.
4 Press the Navigation buttons to scroll to a
folder/file you want and press OK.
5 View photos by using the following menus/
buttons.
PHOTO LIST
Page 1/1
DriveA
USB Device
No Marked
Free Space 4 GB
Up Folder
GUU.JPG
3872x2592, 2604KB
Up Folder
ꔂ Move
KY103
09/15/2012
KY101
04/03/2012
KY104
10/12/2012
KY102
09/03/2012
KY105
11/27/2012
GUU
11/27/2012
JMJ005
11/27/2012
JMJ002
11/27/2012
JMJ006
11/27/2012
JMJ003
11/27/2012
JMJ007
11/27/2012
JMJ004
11/27/2012
JMJ008
11/27/2012
ꔉ PopUp Menu
ꔊ
Slide show
Exit
�
Option
Scrolls through the files.
OK
Views the highlighted file or
enters the mark mode.
P
Moves to the previous or next
page.
FAV
Enters the mark mode.
Menu
ꔋ
2/13
ꔡ
�
꘩ Option
�
Hide
Description
BGM
Turns the background music on or
off. To set the background music
folder, select Option.
(Rotate) Rotates photos clockwise (90°,
180°, 270°, 360°).
NOTE
Description
Navigation
button
BGM
Slideshow Starts or stops a slideshow with
selected photos.
If there are no selected photos, all
photos saved in the current folder
display during a slideshow.
To set a slideshow speed, select
Option.
ꔵ Move Page
ꘂ Mark
Button
6 The following options are available while
viewing photos.
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Hide
Hides the option window.
To display the options, press OK.
Description
View
Views the selected photo.
Mark All
Selects all files
Close
Exits the Mark Mode.
NOTE
yyNon-supported files are displayed the
preview image by icon only
.
yyAbnormal files are displayed in the form
.
of bitmap
Q.MENU options for photo list
1 Press Q.MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to Set
photo view. and press OK.
3 Press the Navigation buttons to scroll to one
of the following options and press OK.
Set photo view.
Option
Slide Speed
Description
Selects a slideshow speed
(Fast, Normal, Slow).
Music Folder Selects a music folder for the
background music.
ENTERTAINMENT 31
t
w
v
Allows you to change Video presets. (See p.36).
Set audio.
Allows you to change Audio presets. (See p.38).
or
Listening to music
1 Press SETTINGS to access the main
menus.
2 Press the Navigation buttons to scroll to
USB and press OK.
3 Press the Navigation buttons to scroll to
MUSIC LIST and press OK.
4 Press the Navigation buttons to scroll to a
folder/file you want and press OK.
5 Play music by using the following menus/
buttons.
MUSIC LIST
Page 1/1
ꕗ
Duration
00:00 / 01:34
Up Folder
ꔉ PopUp Menu
ꔂ Move
Skips to the previous file
When playing,
When you press the
button,
the previous music file will be
played.
When you press the
button,
the next music file will be played.
When you press the EXIT button,
only the music will be stopped
and the player will go to TV viewing.
When using the ꕌorꕍ button
during playback a cursor indicating the position can be played.
Free Space 4 GB
Title
ꔵ Move Page
꘩ Option
ꘂ Mark
ꕌ or ꕍ
Skips to the next file
USB Device
No Marked
DriveA
EXIT
Pauses or resumes playback
Exit
Q.MENU options for music list
1 Press Q.MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to
music list option and press OK.
3 Press the Navigation buttons to scroll to one
of the following options and press OK.
Set audio.
Allows you to change Audio presets. (See p.38).
Button
Description
Navigation button
Scrolls through the files.
OK
Views the highlighted file
or enters the mark mode.
P
Moves to the previous or
next page.
FAV
Enters the mark mode.
Menu
Description
Play
Plays the selected music
file.
Play with Photo
Displays photos during
playback.
Mark All
Selects all files.
Close
Exits the Mark Mode.
6 Control playback by using the following
buttons.
Button
r
s
Description
Stops playback
Plays a music file
NOTE
yyThe TV will not play copy protected files.
yyIf the TV is not in use for some time
during playback, the information box as a
screensaver will appear to prevent image
burn. To return to the Music list screen,
press OK or BACK ꕣ.
File name
Musics
001.mp3
ꕖ 00:53 / 05:31
Time elapsed /Duration
ENGLISH
ENG
Set video.
32 ENTERTAINMENT
ENGLISH
ENG
Viewing movies
Button
1 Press SETTINGS to access the main
menus.
2 Press the Navigation buttons to scroll to
USB and press OK.
3 Press the Navigation buttons to scroll to
MOVIE LIST and press OK.
4 Press the Navigation buttons to scroll to a
folder/file you want and press OK.
5 Play movie by using the following menus/
buttons.
MOVIE LIST
Page 1/1
DriveA
Up Folder
USB Device
No Marked
Free Space 4 GB
Title
Duration
ꔂ Move
ꔉ PopUp Menu
ꔵ Move Page
ꘂ Mark
Description
Navigation Scrolls through the files.
button
OK
Views the highlighted file or
enters the mark mode.
P
Moves to the previous or next
page.
Enters the mark mode.
Mark All
Close
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be
played automatically.
Mark all movie files on the screen.
Exit the Mark Mode.
6 Control playback by using the following
buttons.
ꔋ
Plays a video
Pauses or resumes the playback
Scans backward in a file
Scans forward in a file
Show the Option menu.
Hide the menu on the full-sized
screen.
Return to normal TV viewing.
Skips to specific points in a file
during playback. The time of a
specific point will appear on the
status bar. In some files, this
function may not work properly.
Exit
Button
Play
BACK
<>
Up Folder
Menu
Q.MENU
EXIT
DriveA
4 folder(s), 2 file(s)
FAV
r
s
t
v
w
Description
Stops the playback
↓ 02:10
00:22:05
꘩ Option
Tips for using playing video files
yySome user-created subtitles may not
work properly.
yySome special characters are not
supported in subtitles.
yyHTML tags are not supported in subtitles.
yySubtitles in languages other than the
supported languages are not available.
yyChanging font and colour in subtitles is
not supported.
yySubtitles in languages other than one
specified are not supported.
yyVideo files with subtitle files of 1 MB or
larger may not be played properly.
yyThe screen may suffer temporary
interruptions (image stoppage, faster
playback, etc.) when the audio language
is changed.
yyA damaged movie file may not be played
correctly, or some player functions may
not be usable.
yyMovie files produced with some encoders
may not be played correctly.
yyIf the video and audio structure of
recorded file is not interleaved, either
video or audio is outputted.
yyHD videos with a maximum
of 1920x1080@25/30P or
1280x720@50/60P are supported,
depending on the frame.
yyVideos with resolutions higher
than 1920X1080@25/30P or
1280x720@50/60P may not work
properly depending on the frame.
yyMovie files other than the specified types
and formats may not work properly.
yyMax bitrate of playable movie file is 20
Mbps. (only, Motion JPEG : 10 Mbps)
ENTERTAINMENT 33
Subtitle
Turn on/off the subtitle.
Language
Activated for SMI subtitle and
can select the language within
the subtitle.
Code Page
Can select the font for
subtitle.
When set to default, same
font as general menu will be
used.
Sync
Adjusts the time
synchronisation of the subtitle
from -10 secs to +10 secs
by steps of 0.5 secs during
movie play.
Code Page
Support Language
Latin1
English, French, Spanish,
Portuguese, Malaysia,
Indonesia
Cyrillic
Russian
Thai
Thai
Hebrew
Hebrew
Arabic
Arab, Parsi, Krudish
Vietnam
Vietnamese language
Video options
1 Press Q. MENU to access the Pop-Up
menus.
2 Press the Navigation buttons to scroll to
Set Video Play, Set Video or Set Audio and
press OK.
When you select the Set Video Play
1 Press the Navigation buttons to scroll to
show the Picture Size, Audio Language,
Subtitle.
2 Press the Navigation buttons to scroll to
make appropriate adjustments.
Menu
Description
Picture Size
Selects your desired picture
format during movie play.
Audio
Language
Changes the Language
Group of the audio during
movie play. Files
with a single audio track
cannot be selected.
NOTE
yyOnly 10,000 of sync blocks can be
supported within the subtitle file.
yyWhen playing a video, you can adjust
the Picture Size by pressing Q.MENU or
accessing Aspect Ratio in the PICTURE
menu.
When you select the Set video,
1 Press the Navigation buttons to scroll to
make appropriate adjustments. (See p.36)
When you select the Set audio,
1 Press the Navigation buttons to scroll to
show the Sound Mode, Auto Volume,
Balance.
2 Press the Navigation buttons to scroll to
make appropriate adjustments. (See p.38)
ENGLISH
ENG
yyWe do not guarantee smooth playback
of profiles encoded level 4.1 or higher in
H.264/AVC.
yyDTS Audio codec is not supported.
yyA movie file more than 30 GB in file size
is not supported for playback. The file
size limit is dependent on the encoding
environment.
yyA DivX movie file and its subtitle file must
be located in the same folder.
yyA video file name and its subtitle file name
must be identical for it to be displayed.
yyPlaying a video via a USB connection
that doesn’t support high speed may not
work properly.
yyFiles encoded with GMC(Global Motion
Compensation) and Qpel (Quarterpel
Motion Estimation) may not be played.
yyTrick Mode does not support other
functions than if video files do not have
index information.
yyVideo file names that contain special
characters may not be playable.
34 ENTERTAINMENT
ENGLISH
ENG
DivX® VOD Guide
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
1 Press SETTINGS to access the main
menus.
2 Press the Navigation buttons to scroll to
USB and press OK.
3 Press the Navigation buttons to scroll to
DivX(R) VOD and press OK.
4 Press the Navigation buttons to scroll to
Registration and press OK .
5 View the registration code of your TV.
You must register your device to
play DivX(R) protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
6 When you are finished, press EXIT. When
you return to the previous menu, press
BACK ꕣ.
NOTE
yyMovie files are supported as follows
yyResolution : under 1920x1080 WxH
pixels
yyFrame rate : Under 30 frames/sec
yyVideo Codec : MPEG 1, MPEG 2, MPEG
4, H.264/AVC, DivX 3.11, DivX 4.x, DivX
5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid
1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid
1.10-beta2, JPEG, VC1, Sorenson H.263/
H.264.
DivX® VOD Deregistration
You should deregister your device with 8 digit
DivX deregistration code from your device at
www.divx.com/vod.
NOTE
yy Once the deregistration is executed, you
must register your device again to see
DivX® VOD contents.
1 Press SETTINGS to access the main
menus.
2 Press the Navigation buttons to scroll to
USB and press OK.
3 Press the Navigation buttons to scroll to
DivX(R) VOD and press OK.
4 Press the Navigation buttons to scroll to
Deregistration and press OK.
5 Press the Navigation buttons to select Yes
to confirm.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
6 When you are finished, press EXIT. When
you return to the previous menu, press
BACK ꕣ.
CUSTOMIZING TV SETTING 35
yyImage shown may differ from your TV.
Accessing main menus
1 Press SETTINGS to access the main
menus.
2 Press the Navigation buttons to scroll to one
of the following menus and press OK.
3 Press Navigation buttons to scroll to the
setting or option you want and press OK.
4 When you are finished, press EXIT.
ENGLISH
ENG
CUSTOMIZING TV SETTING
Customizing Settings
SETUP Settings
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to the
setting or option you want and press OK.
3 When you return to the previous menu,
press BACK ꕣ.
yyImage shown may differ from your. TV.
Menu
Move
Description
SETUP
PICTURE
AUDIO
TIME
OPTION
LOCK
INPUT
USB
Sets up and edit
programmes.
Adjusts the image
size, quality, or effect.
SETUP
Move
OK
OK
Auto Tuning
Manual Tuning
Programme Edit
Adjusts the sound
quality, effect, or
volume level.
Sets the time, date, or
timer feature.
Customizes the general settings.
Locks or unlocks
programmes.
Views the input
sources with their
labels.
Displays photo and
play music, movie
content stored on
your USB.
The available programme settings are described
in the following:
Setting
Auto Tuning
Manual Tuning
Programme Edit
Description
Tunes and stores all available programmes through
antennas inputs (See p.24).
Tunes and stores the
programmes you want
manually (See p.25).
Edits programmes
(See p.26).
36 CUSTOMIZING TV SETTING
ENGLISH
ENG
PICTURE Settings
1 Press SETTINGS and the Navigation
buttons to scroll to PICTURE.
2 Press the Navigation buttons to scroll to the
setting or option you want and press OK.
3 When you return to the previous menu,
press BACK ꕣ.
yyImage shown may differ from your TV.
PICTURE
Move
Aspect Ratio
ꕊ Energy Saving
Picture Mode
Description
Selects one of the preset image
or customizes options in each
mode for the best TV screen
performance. You are also able
to customize advanced options
of each mode.
Mode
Vivid
OK
Move
: 16:9
Setting
Picture
Mode
OK
: Off
: Standard
•BackLight
70
•Contrast
90
•Brightness
50
•Sharpness
70
•Colour
60
•Tint
0
R
G
•Colour Temperature 0
W
C
Standard
Cinema
•Advanced Control
•Reset
The available picture settings are described in
the following.
Setting
Aspect
Ratio
Energy
Saving
Description
Changes the image size to view
images at its optimal size (See
p.26).
Reduces the power consumption
by adjusting the screen
brightness.
Sport
Option
Off
Game
The Energy
Saving is off
Minimum/
Medium/
Maximum
Selects the brightness level.
Screen off
The screen turns
off in 3 seconds.
NOTE
yyWhen you select Screen
Off, the screen will be
turned off in 3 seconds and
Screen Off will start.
yyIf you adjust “Energy
Saving- Maximum”,
Backlight feature will not
work.
Adjusts the video
image for the retail
environment by
enhancing the
contrast, brightness, colour, and
sharpness.
Adjusts the image
for the normal
environment.
Optimizes the
video images for a
cinematic look to
enjoy movies as if
you are in a movie
theatre.
Optimizes the
video image for
high and dynamic
actions by emphasizing primary
colours such as
white, grass, or
sky blue.
Optimizes the
video image for
a fast gaming
screen such as
PCs or games.
CUSTOMIZING TV SETTING 37
Advanced image options (Depending on model)
Setting
Backlight
Setting
Dynamic Contrast
Description
Adjusts the contrast to
keep it at the best level
according to the brightness
of the screen. The picture is
improved by making bright
parts brighter and dark parts
darker.
Dynamic Colour
Adjusts screen colours so
that they look livelier, richer
and clearer. This feature
enhances hue, saturation
and luminance so that red,
blue and green white look
more vivid.
Noise Reduction
Reduces screen noise
without compromising video
quality.
Gamma
You can adjust brightness of
dark area and middle gray
level area of the picture.
»»Low: Make the dark and
middle gray level areas
brighter.
»»Medium: Express the
original picture level.
»»High: Make the dark and
middle gray level area
darker.
Black Level
ets black level of the
S
screen to proper level. This
function is available in the
following modes: RF, AV or
HDMI.
»»Low: The reflection of
the screen gets darker.
»»High: The reflection of
the screen gets brighter.
Motion Eye Care
Adjusts screen brightness
to prevent eye glare.
Film Mode
Makes video clips recorded
in film look more natural.
This feature operates
only in 480i / 576i / 1080i
Resolution.
Colour Gamut
Advanced Control
Maximizes the utilization of
colour to increase colour
quality.
Standard: Displays standard
set of colours.
Wide: Increase number of
colours used.
Edge Enhancer
Shows clearer and
distinctive yet natural edges
of the video.
Contrast
Description
Adjusts the brightness of
the screen by controlling
the LCD backlight. If you
decrease the brightness
level, the screen
becomes darker and the
power consumption will
be reduced without any
video signal loss.
Increases or decreases
the gradient of the video
signal. You may use
Contrast when the bright
part of the picture is
saturated.
Brightness
Adjusts the base level of
the signal in the picture.
Sharpness
Adjusts the level of
crispness in the edges
between the light and
dark areas of the picture.
The lower the level, the
softer the image.
Colour
Adjusts intensity of all
colours.
Tint
Adjusts the balance
between red and green
levels.
Colour
Temperature
Choose one of three
automatic colour
adjustments. Set to warm
to enhance hotter colours
such as red, or set to
cool to see less intense
colours with more blue.
You can control red,
green, blue to adjust
colour details.
Advanced Control Customizes the
advanced options.
Reset
Restores the options of
each mode to the factory
default.
ENGLISH
ENG
Basic image options
38 CUSTOMIZING TV SETTING
ENGLISH
ENG
AUDIO Settings
Setting
1 Press SETTINGS and the Navigation
buttons to scroll to AUDIO.
2 Press the Navigation buttons to scroll to the
setting or option you want and press OK.
3 When you return to the previous menu,
press BACK ꕣ.
Mode
yyImage shown may differ from your TV.
AUDIO
Move
Auto Volume
Balance
Sound Mode
Move
: On
0
L
OK
OK
R
: Standard
•Treble
50
•Bass
50
•Reset
TV Speaker
Description
Sound Mode Selects one of the preset sound
modes or customizes options in
each mode.
Standard
Select when you
want standard-quality
sound.
Music
Select when you
listen to music.
Cinema
Select when you
watch movies.
Sport
Select when you
watch sports events.
Game
Select when you play
games.
Option
: On
Treble
Controls the
dominant sounds in
the output. When you
turn up the treble,
it will increase the
output to the higher
frequency range.
Bass
Controls the softer
sounds in the output.
When you turn up the
bass, it will increase
the output to the
lower frequency
range.
Reset
Resets the sound
mode to the default
setting.
The available audio settings are described in the
following.
Setting
Description
Auto Volume Activates the Auto Volume
feature to keep the volume
level consistent whenever
you change programmes.
The volume level may
not be consistent due to
different signal conditions of
broadcasting stations.
Balance
Adjust balance between the left
and right speakers according to
your room environment.
TV Speaker
Turns off the internal speaker of
the TV when using an external HiFi system.
CUSTOMIZING TV SETTING 39
Stereo/Dual Reception
Speaker Sound Output Selection
In AV, Component, HDMI mode, you can select
output sound for the left and right loudspeakers.
Select the sound output.
L+R:
When a programme is selected, the sound
information for the station appears with the
programme
number and station name.
Audio signal from audio L input is sent
to the left loudspeaker and audio signal
from audio R input is sent to the right
loudspeaker.
L+L:
Press I/II button to select the Multi Audio
menu.
R+R:
Audio signal from audio L input is sent
to left and right loudspeakers.
Audio signal from audio R input is sent
to left and right loudspeakers.
Broadcast
Mono
Stereo
Dual
NICAM
On Screen Display
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM
yyMono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
yyLanguage selection for dual language
broadcast
If a programme can be received in two languages (dual language), you can switch to
DUAL I,
DUAL II or DUAL I+II.
DUAL I
Sends the primary broadcast language to the loudspeakers.
DUAL I I
Sends the secondary broadcast
language to the loudspeakers.
DUAL I+I I Sends a separate language to
each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM
reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can
be received.
Sound output can be selected according to the
type of broadcast received.
1 When NICAM mono is received, you can
select NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can
select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM
MONO.
3 When NICAM dual is received, you can
select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
ENGLISH
ENG
This feature may not be applied based on
country broadcasting circumstance.
40 CUSTOMIZING TV SETTING
ENGLISH
ENG
TIME Settings
1 Press SETTINGS and the Navigation
buttons to scroll to TIME.
2 Press the Navigation buttons to scroll to the
setting or option you want and press OK.
3 When you return to the previous menu,
press BACK ꕣ.
yyImage shown may differ from your TV.
TIME
Move
Move OKOK
Clock
Off Time
On TIme
Sleep Timer
yyImage shown may differ from your TV.
OPTION
: Off
Description
Sets the time.
Off Time/On
Time
Sets the time to turn on or off
the TV automatically. To use
this function, you should set
the current time and date in
advance.
NOTE
yyIf you do not press any
button within 2 hours
after the TV turns
on by the On Time
feature, the TV enters
the Standby mode
automatically.
yyIf you set both Off time
and On time features
to the same time,
the Off time feature
overrides the On time
feature.
Sets the length of time until
the TV to turns off. When you
turn the TV off and turn it on
again, the Sleep timer feature
will be set to off.
Move
Move OKOK
Menu Language
Input Label
Factory Reset
: Off
Clock
Sleep Timer
1 Press SETTINGS and the Navigation
buttons to scroll to OPTION.
2 Press the Navigation buttons to scroll to the
setting or option you want and press OK.
3 When you return to the previous menu,
press BACK ꕣ.
: Off
The available time settings are described in the
following.
Setting
OPTION Settings
: Home Use
The available option settings are described in
the following.
Setting
Menu
Language
Description
Selects a desired language.
Input Label
Indicates which device is
connected to which input port.
Factory
Reset
Customizes the TV settings to
suit your preference. The initial
setup screen will appear when
you turn on the TV for the first
time.
Home Use Selects it for
the Home
environment.
Store
Demo
Selects it for the
retail environment.
CUSTOMIZING TV SETTING / TELETEXT 41
1 Press SETTINGS and the Navigation
buttons to scroll to LOCK.
2 Press the Navigation buttons to scroll to the
setting or option you want and press OK.
3 When you return to the previous menu,
press BACK ꕣ.
yyImage shown may differ from your TV.
LOCK
Move
Move OKOK
Lock System
Set Password
Block Programme
Input Block
: Off
TELETEXT
yyThis feature is not available in all countries.
Teletext is a free service broadcast by most TV
stations which gives up-to-the minute information on news, weather, television programmes,
share prices and many other topics.
The teletext decoder of this TV can support
the SIMPLE and FASTEXT systems. SIMPLE
(standard teletext) consists of a number of
pages which are selected by directly entering
the corresponding page number. FASTEXT are
more modern methods allowing quick and easy
selection of teletext information.
Teletext Service - only via Digital Tuner access
where TV broadcast available.
Switch On/Off
The available lock settings are described in the
following.
Setting
Description
Lock System Activates or deactivates the
lock system.
Set
Password
Changes the 4-digit password.
The default PIN is “0 0 0 0”.
Block
Programme
Blocks the programmes that
contain inappropriate contents
for children by pressing the
Blue button. The Lock icon
appears in front of the blocked
programmes. The programmes
can be selected but the screen
blank and the audio is muted.
Input Block
Blocks the input sources.
Press the TEXT button to switch to teletext. The
initial page or last page viewed appears on the
screen.
Two page numbers, TV station name, date and
time are displayed on the screen headline. The
first page number indicates your selection, while
the second shows the current page displayed.
Press the TEXT button to switch off teletext. The
previous mode reappears.
Simple Text
Page selection
1 Enter the desired page number as a three
digit number with the NUMBER buttons. If
during selection you press a wrong number,
you must complete the three digit number
and then re-enter the correct page number.
2 The P∧∨ button can be used to select the
preceding or following page.
ENGLISH
ENG
LOCK Settings
42 TELETEXT
ENGLISH
ENG
Programming a colour button
in LIST mode
If the TV is in SIMPLE text or FASTEXT mode,
press the INDEX button to switch to LIST mode.
Four teletext page numbers of your choice can
be colour coded and easily selected by pressing
the corresponding coloured button on the remote
control handset.
1 Press a coloured button.
2 Using the Number buttons, select the page
you wish to programme.
3 Press the OK button. The selected page
is stored as the selected page number,
blinking once to confirm this. From now
on, you can select this page with the same
coloured button.
4 The three other coloured buttons are
programmed in this way.
Fastext
The teletext pages are colour coded along the
bottom of the screen and are selected by pressing the corresponding coloured button.
Page selection
1 Press the INDEX button to select the index
page.
2 You can select the pages which are
colour coded along the bottom line with
corresponding coloured buttons.
3 AS with SIMPLE teletext mode, you can
select a page by entering its three digit
page number with the Number buttons in
FASTEXT mode.
4 The P ∧∨ button can be used to select the
preceding or following page.
Special Teletext Function
Index
Select the each index page.
Time
When viewing a TV programme, select this
menu to display the time at the top right hand
corner of the screen.
In the teletext mode, press this button to
select a sub page number. The sub page
number is displayed at the bottom of the
screen. To hold or change the sub page,
press the Red/Green, ∧∨ or NUMBER buttons.
Hold
Stops the automatic page change which will
occur if a teletext page consists of 2 or more
sub pages.
The number of sub pages and the sub page
displayed is, usually, shown on the screen
below the time. When this menu is selected
the stop symbol is displayed at the top lefthand corner of the screen and the automatic
page change is inactive.
Reveal
Select this menu to display concealed
information, such as solutions to riddles or
puzzles.
Update
Displays the TV picture on the screen while
waiting for a new teletext page. The display
will appear at the top left hand corner of the
screen. When the updated page is available
then display will change to the page number.
Select this menu again to view the updated
teletext page.
MAINTENANCE / TROUBLESHOOTING 43
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control
the TV with the
remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to ,
yy Check if the batteries are still working and properly installed (
to ).
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep or Off time feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically
after 15 minutes of inactivity.
ENGLISH
ENG
MAINTENANCE
44 SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
32LN510*
39LN510*
42LN510*
32LN5100-TA
32LN510Y-TA
39LN5100-TA
39LN510Y-TA
42LN5100-TA
42LN510Y-TA
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm) 738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
Power requirement
MODELS
738.0 x 497.0 x 207.0 894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60
Hz
Hz
Hz
32LN511*
39LN511*
42LN511*
32LN5110-TB
32LN511Y-TB
39LN5110-TB
39LN511Y-TB
42LN5110-TB
42LN511Y-TB
738.0 x 497.0 x 207.0 894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm) 738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
Power requirement
MODELS
AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60
Hz
Hz
Hz
32LN512*
39LN512*
42LN512*
32LN5120-TC
32LN512Y-TC
39LN5120-TC
39LN512Y-TC
42LN5120-TC
42LN512Y-TC
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm) 738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
Power requirement
738.0 x 497.0 x 207.0 894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60
Hz
Hz
Hz
SPECIFICATIONS 45
Dimensions
(W x H x D)
Weight
With stand (mm)
42LN513*
32LN5130-TI
32LN513Y-TI
39LN5130-TI
39LN513Y-TI
42LN5130-TI
42LN513Y-TI
738.0 x 497.0 x 207.0 894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
MODELS
Weight
39LN513*
Without stand(mm) 738.0 x 449.0 x 79.0
Power requirement
Dimensions
(W x H x D)
32LN513*
With stand (mm)
AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60
Hz
Hz
Hz
32LN515*
32LN49*
32LN5150-TA
32LN5150-TL
32LN515Y-TA
32LN515Y-TL
32LN4900-TD
32LN490Y-TD
32LN4910-TF
32LN491Y-TF
738.0 x 497.0 x 212.0 738.0 x 497.0 x 207.0
Without stand(mm) 738.0 x 449.0 x 79.0
738.0 x 449.0 x 79.0
With stand (kg)
7.7
7.0
Without stand (kg)
6.4
6.4
Power requirement
Environment
condition
AC 100-240 V~ 50 / 60 AC 100-240 V~ 50 / 60
Hz
Hz
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Analogue TV (Depend on Country)
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M, PAL B/B
Programme Coverage
VHF, UHF, CATV
Maximum number of
storable programmes
Analogue TV : 200
External Antenna Impedance
75 Ω
ENGLISH
ENG
MODELS
46 SPECIFICATIONS
ENGLISH
ENG
Component port connecting information
HDMI-DTV supported mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Resolution
Component ports on the
TV
Video output ports on
DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
PR
PR
R-Y
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Cr
Pr
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,
LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
ENGLISH
ENG
ation
LICENSES 47
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
KEY CODES
ENGLISH
ENG
KEY CODES
• This feature is not available for all models.
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
00
CH +, PR +
R/C Button
45
Q.Menu
R/C Button
01
CH -, PR -
R/C Button
4C
List, - (ATSC Only)
R/C Button
02
Volume +
R/C Button
53
List
R/C Button
03
Volume -
R/C Button
5B
Exit
R/C Button
06
> (Arrow Key / Right Key)
R/C Button
61
Blue
R/C Button
07
< (Arrow Key / Left Key)
R/C Button
63
Yellow
R/C Button
08
Power
R/C Button
71
Green
R/C Button
09
Mute
R/C Button
72
Red
R/C Button
0B
Input
R/C Button
79
Ratio / Aspect Ratio
R/C Button
0E
SLEEP
R/C Button
91
AD (Audio Description)
R/C Button
0F
TV, TV/RAD
R/C Button
7A
User Guide
R/C Button
R/C Button
7C
Smart/ Home
R/C Button
10 - 19 * Number Key 0 - 9
1A
Q.View / Flashback
R/C Button
7E
Simplink
R/C Button
1E
FAV (Favorite Channel)
R/C Button
8E
►► (Forward)
R/C Button
20
Text (Teletext)
R/C Button
8F
◄◄ (Rewind)
R/C Button
21
T. Opt (Teletext Option)
R/C Button
AA
Info
R/C Button
28
Return (BACK)
R/C Button
AB
Program Guide
R/C Button
30
AV (Audio/ Video) Mode
R/C Button
B0
► (Play)
R/C Button
39
Caption/Subtitle
R/C Button
B1
ꕗ (Stop/ Live TV)
R/C Button
40
Λ (Arrow Key/ Cursor Up)
R/C Button
BA
ꕘ (Freeze/Slow Play/Pause)
R/C Button
41
V (Arrow Key/ Cursor Down)
R/C Button
BD
● (REC)
R/C Button
42
My Apps
R/C Button
DC
3D
R/C Button
43
Menu / Settings
R/C Button
9F
App/ *
R/C Button
44
OK / Enter
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: There are several ways to connect TV based on model’s support port.
* Please be advised that not all models support these connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
(PC)
USB IN
RS-232C With RS232C Cable
(PC)
(TV)
SERVICE ONLY
DE9 (D-Sub 9pin) Type
1
• You need to purchase the RS-232C (DE9, D-Sub
3 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.
(PC)
2
RS-232C IN
(CONTROL & SERVICE)
(PC)
(TV)
1
3
(PC)
(TV)
(TV)
SERVICE ONLY
• This connection can only be used for the following models:
55/65/LA97**, 84LA98**
1
3
RS-232C IN
(CONTROL & SERVICE)
2
(PC)
2
(TV)
1
3
(PC)
RS-232C IN
2
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
(TV)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
USB USB
IN I
(PC)
EXTERNAL CONTROL DEVICE SETUP
(PC)
4
(TV)
(TV)
RS-232C IN
(TV)
(TV)
(PC)
(PC)
* For other models, connect to the USB port.
1
3
(PC)
(PC)
1
3
2
2
SERVICE
ONLY ONLY
SERVICE
ENGLISH
ENG
(CONTROL & SERVICE)
Phone jack Type
RS-232C
• You need to purchase the phone-jack to RS-232 cable required
for theIN connection between the PC and
(CONTROL & SERVICE)
the TV, which is specified in the manual.
(TV)
(TV)
-- This connection can only be used for the following models: 55/47/39LN5450-UA, 55/50/47/42LN5400UA, 42/39/32LN5300-UA, and 37/32LN530B-UA.
1
3
(PC)
(PC)
1
3
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(TV)
(TV)
(CONTROL & SERVICE)
2
-- This connection can only be used for the following models: 60PN6550-UA, 50/60PN6500-UA,
50/60PN5300-UF, and 42/50PN4500-UA.
Customer Computer
RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC
RS-232C IN
RXD
2
2
TXD
TXD
3
1
RXD
GND
5
3
GND
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
6
OR
9
RS-232C
(Serial port)
TV
RXD
3
2
TXD
TXD
2
1
RXD
GND
5
3
GND
D-Sub 9
Phone
Set ID
For Set ID number, see "Real Data Mapping" on p. 6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to OPTION and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
EXTERNAL CONTROL DEVICE SETUP
5
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
ENGLISH
ENG
Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power*
k
a
00 to 01
02. Aspect
Ratio
k
c
(See p.7)
03. Screen
Mute
k
d
(See p.7)
k
e
00 to 01
k
f
00 to 64
06. Contrast k
g
00 to 64
07.
Brightness
h
00 to 64
04. Volume
Mute
05. Volume
Control
k
08. Color/
Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10.
Sharpness
k
k
00 to 32
11. OSD
Select
k
l
00 to 01
12. Remote
Control
Lock Mode
k
m
00 to 01
COMMAND1 COMMAND2
DATA
(Hexadecimal)
k
t
00 to 64
x
u
00 to 64
j
p
(See p.8)
j
q
00 to 05
m
a
(See p.8)
m
b
00 to 01
19. Key
m
c
20. Control
Back Light,
Control Panel
Light
21. Input
select (Main)
22. 3D
(Only 3D
models)
23. Extended
3D (Only 3D
models)
m
g
Key
Codes
00 to 64
x
b
(See p.10)
x
t
(See p.11)
x
v
(See p.11)
13. Balance
14. Color
(Colour)
Temperature
15. ISM
Method (Only
Plasma TV)
16. Energy
Saving
17. Tune
Command
18. Channel
(Programme)
Add/Del(Skip)
* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...
32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...
FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...
EXTERNAL CONTROL DEVICE SETUP
7
* Commands may work differently depending on model and signal.
04.Volume Mute (Command: k e)
►► To control Power *On or Off of the set.
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : *Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
Ack [a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.
* With RS232C cable, TV can communicate "ka command"
in power-on or power-off status. but with USB-to-Serial
converter cable, the command works only if TV is on.
05.Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen
(4:3)
02 : Wide screen
(16:9)
04 : Zoom
05 : Zoom 2
(Latin America
except Colombia
Only)
06 : Set by Program/
Original
07 : 14:9
(Europe, Colombia, MidEast, Asia except South
Korea and Japan)
09 : * Just Scan
0B : Full Wide
(Europe, Colombia, MidEast, Asia except South
Korea and Japan)
10 to 1F : C
inema Zoom 1
to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on model
and is supported for DTV fully, and ATV, AV partially.
03. Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : S
creen mute off (Picture on), Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06.Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07.Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
08.Color/Colour (Command: k i)
►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
01.Power (Command: k a)
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
09.Tint (Command: k j)
14.Color(Colour) Temperature (Command: x u)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
10.Sharpness (Command: k k)
15.ISM Method (Command: j p) (Only Plasma TV)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11.OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12.Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
16.Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13.Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
17.Tune Command (Command: m a)
* This command may work differently depending on
model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][Cr]
* Analogue Terrestrial/Cable
[Data 00][Data 01] Channel Data
Data00 : High byte channel data
Data01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analogue)
- 00 : Terrestrial TV (ATV)
- 80 : Cable TV (CATV)
EXTERNAL CONTROL DEVICE SETUP
[Data 00][Data 01]: Channel Data
Data00 : High Channel data
Data01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data05: Input Source (Analogue)
- 00 : Terrestrial TV (ATV)
- 01 : Cable TV (CATV)
* Digital Terrestrial/Cable
Data00 : xx (Don't care)
Data02 : Input Source (Digital)
- 10 : Terrestrial TV (DTV)
- 20 : Terrestrial Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
[Data 01][Data 02]: Major Channel Number
Data01 : High byte Channel Data
Data02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data03 : High byte Channel Data
Data04 : Low byte Channel Data
* Tune Command Examples:
1.Tune to the analogue terrestrial (PAL) Channel 10.
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analogue Terrestrial TV = 00
Result = ma 00 00 0a 00
Data05 : Input Source (Digital)
- 02 : Terrestrial TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
Number
- 22 : Terrestrial TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
2.Tune to the digital terrestrial (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Terrestrial TV = 10
Result = ma 00 00 01 10
3.Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][x]
[a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except
Colombia Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
* Analogue Terrestrial/Cable
Data00 : Physical Channel Number
- Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data01 & 02: xx (Don't care)
Data03 & 04: xx (Don't care)
* Tune Command Examples:
1.Tune to the analogue cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analogue Cable TV = 01
Total = ma 00 23 00 00 00 00 01
2.Tune to the digital terrestrial (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Terrestrial TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Terrestrial/Satellite
Data 00: xx (Don't care)
ENGLISH
ENG
* Digital Terrestrial/Cable/Satellite
9
10 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Terrestrial TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital terrestrial (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Terrestrial TV = 02
Total = ma 00 00 00 11 00 01 02
20.Control Back Light (Command: m g)
• For LCD TV / LED TV
►► To control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
21.Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
2.Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
Transmission [x][b][ ][Set ID][ ][Data][Cr]
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
18.Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
19.Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
DataKey code - See p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1
21 : AV2
40 : Component1
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
EXTERNAL CONTROL DEVICE SETUP
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
(Depending on model)
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
DataStructure
[Data 00]00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]00 : Top and Bottom
01 : Side by Side
02 : Checker Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]00 : Right to Left
01 : Left to Right
[Data 03]3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02]
have no meaning.
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 00]
[Data 01]
[Data 02]
[Data 03]
00
O
O
O
01
X
X
X
02
X
X
X
03
X
O
O
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
23.Extended 3D(Command: x v) (only 3D models)
(Depending on model)
►► To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
[Data 01]It has own range for each 3D option
determined by [Data 00].
1) When[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When[Data 00] is 01, 02
DataMin: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual
only.
3) When[Data 00] is 06, 07
00 : Off
01 : On
4) When [Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 2D video
01 : Change 3D video to 2D video, except
2D-to-3D video
* If conversion condition doesn’t meet, command is
treated as NG.
5) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]
ENGLISH
ENG
22.3D(Command: x t) (only 3D models)
11
Download PDF