LG | 32LB1R | LG 42LC2R Owner’s Manual

OWNER’S MANUAL
32LC2R* /37LC2R*
42LC2R
32LB1R* /37LB1R *
42LB1R*
42PC1R*
50PC1R*
50PC3R*
P l e a s e r e a d I n f o r m a t i o n Ma n u a l i n c l u d e d
t o g e t h e r b e f o r e r e a d i n g t h i s m a n u a l a n d o p e r a ting your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require service.
Model number
Serial number
:
:
P/NO: 38289U0025G (0606-REV03)
ACCESSORIES
INPUT
TV
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PIP PR-
PIP
SIZE
POSTION
PIP PR+
SWAP
PIP INPUT
LIST
MENU
EXIT
I/II
SLEEP
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
OK
Owner's Manual
Q.VIEW
VOL
PR
MUTE
1
2
4
5
3
6
7
8
9
*
10
FAV
TIME
REVEAL
?
Owner’s Manual
INDEX
Remote Control
Batteries
Power Cord
Polishing Cloth
Polish the screen with the cloth
This feature is not available
for all models.
F o r 4 2 P C 1 R* , 5 0 P C 1 R* , 5 0 P C 3 R*
2-Wall brackets
2-eye-bolts
2-bolts for stand assembly
(Refer p.13)
This feature is not available
for all models.
F o r 3 2 L C 2 R* , 3 7 L C 2 R* , 4 2 L C 2 R* , 3 2 L B 1 R* , 3 7 L B 1 R* , 4 2 L B 1 R*
3 2 L C 2 R* o n l y
2-TV brackets
2-Wall brackets
Twister Holder
Arrange the wires
with the twister holder.
2-bolts
Cable
Management
4-bolts for stand assembly
(Refer p.14)
For 32LC2RW, 37LC2RW, 42LC2RW
Twister Holder
Arrange the wires
with the twister holder.
1
CONTENTS
ACCESSORIES
1
..................................................
TV MENU
CONTENTS
INTRODUCTION
On Screen Menus Selection and Adjustment . . . . .36
Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . . . .4-10
Remote Control Key Functions/
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Setting up TV stations
INSTALLATION
Unfolding The Base Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Basic Connection /
How to Remove the Cable Management . . . . . . . . . . .15-16
How to join the product assembly to the wall
to protect the set tumbling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
CONNECTIONS & SETUP
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
VCR SETUP/
EXTERNAL EQUIPMENT CONNECTIONS . . . .20-21
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
STB(SET-TOP BOX) SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
PC SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-28
TURNING THE TV ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
SPECIAL FUNCTIONS
PIP (Picture-In-Picture) / Double Window / POP
Watching PIP/Double Window/POP . . . . . . . . . . . . . .30
Programme Selection for Sub Picture . . . . . . . . . . . .30
Input Source Selection for Sub Picture . . . . . . . . . .31
Sub Picture Size Adjustment (PIP mode only)31
Moving the Sub Picture (PIP mode only) . . . . . . .31
Adjusting PIP Transparency (PIP mode only) . .31
Swapping between main and sub pictures . . . . . .32
POP
(Picture-out-of-Picture: Programme Scan) . . . . .32
Auto programme tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Manual programme tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Assigning a station name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Booster (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Programme edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Favourite programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Calling the programme table . . . . . . . . . . . . . . . . . . . . . . . .44
Picture Menu Options
PSM (Picture Status Memory) . . . . . . . . . . . . . . . . . . . . . .45
Picture Adjustment (PSM-User option) . . . . . . . . .46
CSM (Colour Status Memory) . . . . . . . . . . . . . . . . . . . . . .47
Manual Colour Temperature Control
(CSM - User option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
ADVANCED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Sound Menu Options
SSM (Sound Status Memory) . . . . . . . . . . . . . . . . . . . . . . .52
Sound Frequency Adjustment
(SSM - User option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Balance Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Stereo/Dual Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
NICAM Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Speaker Sound Output Selection . . . . . . . . . . . . . . . . . .57
Time Menu Options
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
On/Off Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Auto Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Teletext
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Special Teletext Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
2
Special Menu Options
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
ISM (Image Sticking Minimization) Method . . .62
Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
TV MENU
CONTENTS
Screen Menu Options
Auto Configure (RGB [PC] mode only) . . . . . . . . . . . .64
Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Setting the Picture Format . . . . . . . . . . . . . . . . . . . . . .66-67
Selecting Wide VGA/XGA mode . . . . . . . . . . . . . . . . . . .68
Initializing
(Reset to original factory settings) . . . . . . . . . . . . . . . .68
APPENDIX
External Control Device Setup . . . . . . . . . . . . . . . . . . . . . .69-75
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Remote control ir codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Programming the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Programming code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79-80
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . .81-82
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84-85
3
INTRODUCTION
CONTROLS
This manual explains the features available on the 4 2 P C 1 R* , 5 0 P C 1 R* TVs.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
INTRODUCTION
Front Panel Controls
INPUT
MENU
PR
VOL
OK
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
INPUT
MENU
OK
INPUT
VOL
MENU
PROK
INPUT Button
OK Button
PROGRAMME Buttons
POWER Button
MENU Button
4
VOLUME Buttons
VOL
This manual explains the features available on the 5 0 P C 3 R* TVs.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
PROGRAMME Buttons
PR
INTRODUCTION
Front Panel Controls
VOLUME Buttons
VOL
OK
OK Button
MENU
MENU Button
INPUT
INPUT Button
POWER Button
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
5
INTRODUCTION
CONNECTION OPTION
This is the back panel of models 4 2 P C 1 R* , 5 0 P C 1 R* , 5 0 P C 3 R* TVs.
Back Connection Panel
INTRODUCTION
AUDIO Input
Connections are available for listening
stereo sound from an external device.
AV IN 2
R
VIDEO Input
Connects the video signal from a video
device.
AUDIO
L/MONO
VIDEO
1
2
3
4
5
VARIABLE
AC IN
AUDIO OUT
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV OUT
COMPONENT IN
REMOTE
CONTROL IN
2
RS-232C IN
(CONTROL & SERVICE)
AV IN 1
HDMI/DVI IN
1
6
VIDEO
AUDIO
8
VIDEO
9
1
Remote Control Port
2
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
3
AV OUT
Connect the second TV or monitor to the
AV OUT socket on the set.
4
Variable Audio Output
Connect an external amplifier or add a sub
woofer to your surround sound system.
5
6
7
ANTENNA
IN
(MONO)
S-VIDEO
Power Cord Socket
This the set operates on an AC power. The voltage is indicated on the Specifications page.
Never attempt to operate the set on DC power.
AUDIO
10
11
6
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
7
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
8
S-Video Input
Connect S-Video out from an S-VIDEO device.
9
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
10
Component Input
Connect a component video/audio device to
these jacks.
11
Antenna Input
CONTROLS
This manual explains the features available on the 3 2 L C 2 R* , 3 7 L C 2 R* , 4 2 L C 2 R* TVs.
.■ This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
PR
PROGRAMME Buttons
VOL
VOLUME Buttons
OK
OK Button
MENU
MENU Button
INPUT
INPUT Button
INTRODUCTION
Front Panel
R
/I
■
POWER Button
This feature is not available for all models.
Remote Control Sensor
Power/Standby Indicator
Side Panel
• illuminates red in standby mode.
• illuminates white when the set is switched on.
7
INTRODUCTION
CONTROLS
This manual explains the features available on the 3 2 L B 1 R* , 3 7 L B 1 R * , 4 2 L B 1 R* TVs.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
INTRODUCTION
Front Panel Controls
RGB
PC
Remote Control
Sensor
Index
TV mode
r)
Power/Standby Indicator (r
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
AV 1-2 mode
Component 1-2 mode
RGB
PC
RGB mode
HDMI mode
Intelligent eye
Intelligent eye
INPUT
ME NU
OK
VO L
PR
OK Button
MENU Button
INPUT Button
POWER Button
8
VOLUME
Buttons
PROGRAMME
Buttons
CONNECTION OPTION
This is the back panel of models 3 2 L C 2 R* , 3 7 L C 2 R* , 4 2 L C 2 R* TVs.
Back Connection Panel
37LC2R*
42LC2R*
32LC2R*
R
L/MONO
VIDEO
VIDEO
AUDIO
L/MONO
AV IN 2
AV IN 2
AC IN
1
2
AUDIO Input
Connections are available for listening
stereo sound from an external device.
3
VIDEO Input
Connects the video signal from a video
device.
INTRODUCTION
R
AUDIO
4
AC IN
VARIABLE
AUDIO OUT
RGB IN
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
AV OUT
COMPONENT IN
5
HDMI/DVI IN
RS-232C IN
(CONTROL & SERVICE)
6
AV IN 1
2
REMOTE
CONTROL
IN
7
1
(MONO)
S-VIDEO VIDEO
8
AUDIO
9
VIDEO
ANTENNA
IN
AUDIO
10
11
1
Power Cord Socket
This the set operates on an AC power. The voltage is indicated on the Specifications page.
Never attempt to operate the set on DC power.
6
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
2
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
7
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
3
AV OUT
Connect the second TV or monitor to the
AV OUT socket on the set.
8
S-Video Input
Connect S-Video out from an S-VIDEO device.
4
Variable Audio Output
Connect an external amplifier or add a sub
woofer to your surround sound system.
9
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
5
Remote Control Port
10
Component Input
Connect a component video/audio device to
these jacks.
11
Antenna Input
9
INTRODUCTION
CONNECTION OPTION
This is the back panel of models 3 2 L B 1 R * , 3 7 L B 1 R * , 4 2 L B 1 R* TVs.
Back Connection Panel
37/42LB1R*
2
S-VIDEO
VIDEO Input
Connects the video signal from a video
device.
VIDEO L/MONO AUDIO R
AV IN 2
1
AUDIO Input
Connections are available for listening
stereo sound from an external device.
AV IN 2
VIDEO L/MONO AUDIO R
INTRODUCTION
S-VIDEO
32LB1R*
3
4
L
R
RGB IN
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
COMPONENT IN
AV OUT
5
10
6
HDMI/DVI IN
7
RS-232C IN
(CONTROL & SERVICE)
8
AV IN 1
2
REMOTE
CONTROL
IN
1
L(MONO)
S-VIDEO
9
R
Y
PB
PR
10
L
ANTENNA
IN
R
11
7
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
AV OUT
Connect the second TV or monitor to the
AV OUT socket on the set.
8
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
3
Component Input
Connect a component video/audio device to
these jacks.
9
S-Video Input
Connect S-Video out from an S-VIDEO device.
4
Variable Audio Output
Connect an external amplifier or add a sub
woofer to your surround sound system.
10
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
5
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
11
Antenna Input
6
Remote Control Port
1
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
2
REMOTE CONTROL KEY FUNCTIONS
POWER Switches the set on from standby or off to standby.
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@
@@@@@@@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
TV INPUT Returns from AV1, AV2,
Component1,Component2, RGB, HDMI/DVI to the
TV mode. Switches the set on from standby.
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
INPUT
TV
INPUT
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
POWER
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
DVD
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g
@@g
@@g
@@g
@@g
@@g
@@@@@@@@
@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@
?@@
?@@
?@@
?@@
?@@
?@@
?@@@@@@@@
?@@@@@@@@
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
@@@@@@@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
ARC
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
PIP PR-
ARC Selects your desired picture format.
VCR
?@@
?@@
?@@
?@@
?@@
?@@
?@@@@@@@@
?@@@@@@@@
PIP
SIZE
POSTION
PIP PR+
SWAP
PIP INPUT
LIST
MENU
EXIT
INTRODUCTION
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
TEXT
Brightness Adjusts screen brightness.
adjustment It returns to the default settings brightness by changing
mode source.
TV
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g
@@g
@@g
@@g
@@g
@@g
@@@@@@@@
@@@@@@@@
INPUT If you press the button once, the input source OSD will
appear on screen. Press the D / E button and then O K button to select the desired input source (TV, AV1, AV2,
Component1, Component2, RGB,
HDMI/DVI ).Switches the set on from standby.
@@
@@
@@
@@
@@
@@
@@
@@
I/II
SLEEP
OK
PIP Switches the sub picture PIP, DW, POP or off mode.
SIZE Adjusts the sub picture size.
POSITION Moves the sub picture.
PIP PR - /+ Selects a programme for the sub picture.
Q.VIEW
VOL
PR
SWAP Exchanges the main/sub images in PIP/Double window/POP mode.
MUTE
PIP INPUT Selects the input source for the sub picture in PIP/Double
window mode.
Coloured These buttons are used for teletext (only T E L E T E X T
buttons models) or P r o g r a m m e e d i t.
VCR/DVD Controls some video cassette recorders or DVD players
control buttons when you have already selected DVD or VCR mode button.
EXIT Clears all on-screen displays and returns to TV viewing
from any menu.
1
2
3
4
5
6
7
8
9
*
0
FAV
TIME
REVEAL
?
INDEX
LIST Displays the programme table.
MENU Selects a menu.
I/II Selects the sound output.
SLEEP Sets the sleep timer.
11
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
MODE Selects the remote operating modes.
1
INPUT
TV
INPUT
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
@@@@@@@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
POWER
@@
@@
@@
@@
@@
@@
@@
@@
TV
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
DVD
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
ARC
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
VCR
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g
@@g
@@g
@@g
@@g
@@g
@@@@@@@@
@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@
?@@
?@@
?@@
?@@
?@@
?@@@@@@@@
?@@@@@@@@
INTRODUCTION
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
@@@@@@@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
TEXT
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
PIP
SIZE
POSTION
PIP PR+
SWAP
PIP INPUT
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
1
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
PIP PR-
@@
@@
@@
@@
@@
@@
@@
@@
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left the system settings to your preference.
Right)
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g
@@g
@@g
@@g
@@g
@@g
@@@@@@@@
@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@
?@@
?@@
?@@
?@@
?@@
?@@@@@@@@
?@@@@@@@@
OK Accepts your selection or displays the current mode.
VOLUME UP Adjusts the volume.
/DOWN
LIST
MENU
EXIT
I/II
SLEEP
Q.VIEW Returns to the previously viewed programme.
MUTE Switches the sound on or off.
OK
Programme Selects available programmes.
UP/DOWN Switches the set on from standby.
0~9 number Selects a programme.
button
Selects numbered items in a menu.
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
@@@@@@@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
Q.VIEW
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
Switches the set on from standby.
VOL
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
PR
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
MUTE
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
1
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
2
3
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
4
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
INSTALLING BATTERIES
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
No function
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
FAV Displays the selected favourite programme.
*
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
5
6
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
7
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
8
9
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
*
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g
@@g
@@g
@@g
@@g
@@g
@@@@@@@@
@@@@@@@@
0
FAV
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@
?@@
?@@
?@@
?@@
?@@
?@@@@@@@@
?@@@@@@@@
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?
@@@@@@@@e?
@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
@@@@@@@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
@@h?
@@
?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
1
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
TIME
REVEAL
INDEX
12
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
• Open the battery compartment cover on the back side and insert the
batteries with correct polarity.
• Install two 1.5V alkaline batteries of AA type. Don’t mix used batteries
with new batteries.
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g
@@g
@@g
@@g
@@g
@@g
@@@@@@@@
@@@@@@@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@
?@@
?@@
?@@
?@@
?@@
?@@@@@@@@
?@@@@@@@@
INSTALLATION
UNFOLDING THE BASE STAND (42PC1R*)
■
This feature is not available for all models.
1
A
INSTALLATION
3
2
4
B
C
■
Place the set with the screen facing down on a cushion or soft cloth as shown in Figure 1.
Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
■
Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.
■
When connecting cables to the set, do not disengage the lock (C).
This may cause the set to fall, causing serious bodily injury and serious damage to the set.
! NOTE
Figures shown here may be slightly different from your set.
When closing the stand for storage
D
A
B
First remove the screws in the holes (B) on the bottom
of the stand. And then pull two Hooks (D) of the stand bottom
and fold the stand into the back of the set.
After folding, push two Locks (A) of the stand bottom outward.
13
INSTALLATION
STAND INSTALLATION (Only 32LC2R* )
■
This feature is not available for all models.
Carefully place the product screen side down on
a cushioned surface that will protect product
and screen from damage.
2
Place the product stand on the product as
shown.
3
Install the 4 bolts securely, in the back of the
product in the holes provided.
INSTALLATION
1
SWIVEL STAND (32LB1R*, 37LB1R*, 42LB1R*)
- This feature is not available for all models.
- The TV can be conveniently swiveled on its stand 30° to the left or right to provide the optimum viewing angle.
14
BASIC CONNECTION (42PC1R*, 50PC1R*, 50PC3R*)
■
These models have two cable arrangement methods according to the stand type.
Stand type 1
Arrange the cables as shown picture.
INSTALLATION
Stand type 2
1
Hold the C A B L E M A N A G E M E N T with both
hands and push it as shown.
CABLE MANAGEMENT
2
Connect the cables as necessary.
To connect an additional equipment, see the
E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
3
Reinstall the C A B L E M A N A G E M E N T as
shown.
15
INSTALLATION
BASIC CONNECTION (LCD TV models)
(a) - 32LC2R*.
(b) - 37LC2R*, 42LC2R*, 32LB1R*, 37LB1R*, 42LB1R*.
1
Connect the cables as necessary.
After connecting the cables neatly,
arrange the cables to the Cable Holder.
To connect an additional equipment, see
the E x t e r n a l e q u i p m e n t C o n n e c t i o n s
section.
2
(a)
(b)
(a)
(b)
(a)
(b)
Install the C A B L E M A N A G E M E N T
as shown.
INSTALLATION
3
Bundle the cables using the supplied
twister holder.
HOW TO REMOVE THE CABLE MANAGEMENT (LCD TV models)
Hold the C A B L E M A N A G E M E N T with both
hands and pull it upward.
! NOTE
G
16
Do not hold the C A B L E M A N A G E M E N T when moving the product.
If the product is dropped, you may be injured or the product may be broken.
HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO
PROTECT THE SET TUMBLING
■
■
Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the
product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling
for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure
that children don’t climb on or hang from the product.
1
1
2
or
2
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall.
INSTALLATION
1
3
3
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is
safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
G
When moving the product to another place undo the ropes first.
Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
To use the product safely make sure that the height of the bracket that is mounted on the wall is same as
that of the product.
17
INSTALLATION
INSTALLATION
■
■
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
GROUNDING
Power
Supply
Ensure that you connect the earth ground wire to prevent
possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Desktop Pedestal Installation
INSTALLATION
For proper ventilation, allow a clearance of 4" on each side and from the wall.
4 inches
4 inches
4 inches
INPUT
MENU
OK
VOL
4 inches
PR
Wall Mount: Horizontal installation
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
4 inches
4 inches
4 inches
4 inches
4 inches
< O n l y 4 2 P C 1 R* s e r i e s >
Remove two screws of the backside of the set before
installing the wall mounting bracket.
18
CONNECTIONS & SETUP
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
■
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna Socket
ANTENNA
IN
ANTENNA
IN
RF Coaxial Wire (75 ohm)
VHF Antenna
Turn clockwise to tighten.
UHF Antenna
ANTENNA
IN
CONNECTIONS & SETUP
Outdoor Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
■
■
In poor signal areas, to get better picture quality,
install a signal amplifier to the antenna as shown to
VHF
the right.
If signal needs to be split for two TVs, use an antenna
signal splitter for connection.
UHF
ANTENNA
IN
Signal
Amplifier
ANTENNA
IN
19
CONNECTIONS & SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen.
■
When connecting with an antenna
VCR
2
ANTENNA
IN
Connect the A N T O U T socket of the VCR to the
A N T E N N A I N socket on the set.
1
ANT IN
IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
3
Connect the antenna cable to the A N T I N
antenna socket of the VCR.
2
OUT
4
VARIABLE
AUDIO OUT
1
COMPONENT IN
2
Press the P L A Y button on the VCR and match
the appropriate programme between the TV and
VCR for viewing.
3
ANTENNA
IN
1
VIDEO
AUDIO
1
V I D E O jacks between TV
Connect the A U D I O/V
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
3
Select A V 1 input source using the I N P U T button
on the remote control.
- If connected to A V I N 2, select A V 2 input
source.
ANT IN
VCR
IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
3
OUT
4
(R) AUDIO (L) VIDEO
1
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV
V OUT
RS-232C IN
(CONTROL & SERVICE)
AV IN 1
CONNECTIONS & SETUP
When connecting with a RCA cable
(MONO)
S-VIDEO
VIDEO
AUDIO
RGB IN
! NOTE
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack
of the set.
AV IN 1
G
AV OUT
(
S-VIDEO
20
VIDEO
)
AUDIO
(R) AUDIO (L) VIDEO
AV IN 1
(
S-VIDEO
VIDEO
)
AUDIO
When connecting with an S-Video cable
1
Connect the S-VIDEO output of the VCR to the
S - V I D E O input on the set. The picture quality is
improved; compared to normal composite
(RCA cable) input.
2
Connect the audio outputs of the VCR to the
A U D I O input jacks on the set.
3
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
ANT IN
IN
VCR
S-VIDEO
ANT OUT
OUTPUT
SWITCH
3
OUT
(R) AUDIO (L) VIDEO
4
2
1
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV OUT
AV IN 1
RS-232C IN
(CONTROL & SERVICE)
4
Select A V 1 input source with using the I N P U T
button on the remote control.
(MONO)
S-VIDEO
VIDEO
AUDIO
G
CONNECTIONS & SETUP
! NOTE
If both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy.
only the S-Video can be received.
EXTERNAL EQUIPMENT CONNECTIONS
1
V I D E O jacks between
Connect the A U D I O/V
TV and external equipment. Match the jack colors
(Video = yellow, Audio Left = white, and Audio
Right = red).
AV IN 2
R
AUDIO
L/MONO
2
3
Select A V 2 input source with using the I N P U T
button on the remote control.
- If connected to A V I N 1 input, select A V 1 input
source.
Operate the corresponding external equipment.
Refer to external equipment operating guide.
VIDEO
1
Camcorder
Video Game Set
R
AUDIO
L
VIDEO
21
CONNECTIONS & SETUP
DVD SETUP
When connecting with a component cable
1
2
3
Connect the video outputs (Y, PB, PR) of the DVD
to the C O M P O N E N T I N V I D E O jacks on the set.
DVD
B
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the set.
(R) AUDIO (L)
R
1
2
Turn on the DVD player, insert a DVD.
VARIABLE
AUDIO OUT
4
Select C o m p o n e n t 1 or C o m p o n e n t 2 input
source with using the I N P U T button on the remote
control.
COMPONENT IN
2
1
5
Refer to the DVD player's manual for operating
instructions.
VIDEO
AUDIO
! NOTE
Component Input ports
To get better picture quality, connect
a DVD player to the component input
ports as shown below.
CONNECTIONS & SETUP
G
Component ports on the TV
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
When connecting with a S-Video cable
RGB IN
AV OUT
Connect the S-VIDEO output of the DVD to the
S - V I D E O input on the set.
2
Connect the audio outputs of the DVD to the
A U D I O input jacks on the set.
3
Turn on the DVD player, insert a DVD.
(
ANTENNA
IN
4
VIDEO
)
AUDIO
Select A V 1 input source with using the I N P U T
button on the remote control.
2
22
Refer to the DVD player's manual for operating
instructions.
1
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
RGB IN
AV OUT
AUDIO
RGB
(PC/DTV)
AV OUT
RS-232C IN
(CONTROL & SERVICE)
(MONO)
S-VIDEO
5
S-VIDEO
VIDEO
AUDIO
RS-232C IN
(CONTROL & SERVICE)
AV IN 1
S-VIDEO
(R) AUDIO (L)
DVD
AV IN 1
AV IN 1
1
(
S-VIDEO
S-VIDEO
VIDEO
)
AUDIO
(
S-VIDEO
VIDEO
)
AUDIO
When connecting with a HDMI cable
1
Connect the HDMI output of the DVD to the
H D M I / D V I I N jack on the set.
2
Select H D M I / D V I input source with using the
I N P U T button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
HDMI/DVI IN
REMOTE
CONTROL IN
RGB IN
AV IN 1
AV OUT
(
S-VIDEO
VIDEO
1
)
AUDIO
DVD
HDMI-DVD OUTPUT
! NOTE
G
G
CONNECTIONS & SETUP
G
TV can receive the video and audio signal simultaneously with using a HDMI cable.
If the DVD supports Auto HDMI function, the DVD output resolution will be automatically set
to 1280x720p.
If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the DVD to 1280x720p.
VARIABLE
AUDIO OUT
RGB IN
AV OUT
COMPONENT IN
2
AV IN 1
1
(
S-VIDEO
VIDEO
)
VIDEO
ANTENNA
IN
AUDIO
AUDIO
23
CONNECTIONS & SETUP
STB(SET-TOP BOX) SETUP
■
When connecting with a component cable
1
2
B
Connect the audio output of the digital set-top box
to the C O M P O N E N T I N A U D I O jacks on the set.
3
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t 1 or C o m p o n e n t 2 input
source with using the INPUT button on the remote control.
R
(R) AUDIO (L)
2
1
VARIABLE
AUDIO OUT
2
1
VIDEO
AUDIO
! NOTE
Signal
Component
RGB-DTV HDMI/DVI (DTV)
480i/576i
Yes
No
No
480p/576p/720p/1080i
Yes
Yes
Yes
When connecting with a HDMI to DVI cable
1
Connect the DVI output of the digital set-top box
D V I I N jack on the set.
to the H D M I/D
RGB IN
RGB IN
Connect the audio outputs of the set-top box to
the A U D I O ( R G B / D V I ) jack on the set.
COMPONENT IN
S-VIDEO
(
VIDEO
HDMI/DVI IN
)
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
4
D V I input source with using the
Select H D M I/D
I N P U T button on the remote control.
(MONO)
S-VIDEO
S-VIDEO
AUDIO
2
3
AV
V OUT
RS-232C IN
(CONTROL & SERVICE)
AV
V IN 1
2
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV OUT
AV IN 1
CONNECTIONS & SETUP
)
Digital Set-top Box
Connect the video outputs (Y, PB, PR) of the digital
set-top box to the COMPONENT IN VIDEO jacks on the set.
COMPONENT IN
VIDEO
AUDIO
1
VIDEO
AUDIO
1
2
RGB IN
AUDIO
RGB
(PC/DTV)
AV IN 1
Digital Set-top
Box
AV OUT
RS-232C IN
(CONTROL
& SERVICE)
(R) AUDIO (L)
DVI-DTV
OUTPUT
(
S-VIDEO
S-VIDEO
VIDEO
! NOTE
G
G
G
OUT
DIO
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
24
If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is necessary.
If the digital set-top box supports Auto DVI function, the output resolution of the digital
set-top box will be automatically set to 1280x720p.
If the digital set-top box does not support Auto DVI, you need to set the output resolution
appropriately. To get the best picture quality, adjust the output resolution of the digital settop box to 1280x720p.
HDMI/DVI IN
)
AUDIO
HDMI
COMPONENT IN
2
1
VIDEO
AUDIO
RGB IN
AV OUT
AV IN 1
When connecting with a D-sub 15 pin cable
(
S-VIDEO
VIDEO
)
AUDIO
RGB IN
1
Connect the RGB output of the digital set-top box
to the R G B I N ( P C / D T V ) jack on the set.
(
S-VIDEO
2
VIDEO
Digital Set-top Box
RGB-DTV OUTPUT
RGB IN
AUDIO
RGB
(PC/DTV)
AV OUT
)
AUDIO
Connect the audio outputs of the set-top box to
the A U D I O ( R G B / D V I ) jack on the set.
3
(R) AUDIO (L)
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
RS-232C IN
(CONTROL & SERVICE)
2
AV IN 1
AV IN 1
AV OUT
1
(
S-VIDEO
S-VIDEO
VIDEO
)
AUDIO
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV OUT
4
AV IN 1
RS-232C IN
(CONTROL & SERVICE)
Select R G B - D T V input source with using the
I N P U T button on the remote control.
(MONO)
S-VIDEO
S-VIDEO
VIDEO
AUDIO
HDM
CONNECTIONS & SETUP
HDMI/DVI IN
When connecting with a HDMI cable
Connect the HDMI output of the digital set-top
D V I I N jack on the set.
box to the H D M I /D
1
HDMI/DVI IN
HDMI/DVI IN
2
D V I input source with using the
Select H D M I /D
I N P U T button on the remote control.
3
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
REMOTE
CONTROL IN
1
Digital Set-top Box
HDMI/DVI IN
HDMI-OUTPUT
! NOTE
G
G
G
TV can receive the video and audio signal simultaneously with using a HDMI cable.
If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top
box will be automatically set to 1280x720p.
If the digital set-top box does not support Auto HDMI, you need to set the output resolution
appropriately. To get the best picture quality, adjust the output resolution of the digital set-top
box to 1280x720p.
VARIABLE
AUDIO OUT
COMPONENT IN
2
1
VIDEO
VARIABLE
AUDIO OUT
ANTENNA
IN
VARIABLE
AUDIO
AUDIO OUT
25
COMPONENT IN
2
COMPONENT IN
1
ANTENNA
IN
AUDIO
2
1
VIDEO
AUDIO
CONNECTIONS & SETUP
PC SETUP
■
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable
PC
1
Connect the RGB output of the PC to the R G B
( P C / D T V ) jack on the set.
2
Connect the audio outputs of the PC to the
A U D I O ( R G B / D V I ) jack on the set.
AUDIO
RGB-PC OUTPUT
RGB IN
AUDIO
RGB
(PC/DTV)
AV OUT
2
1
3
AV IN 1
RS-232C IN
(CONTROL & SERVICE)
Turn on the PC and the set.
(
S-VIDEO
S-VIDEO
VIDEO
)
AUDIO
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
HDMI/DVI IN
AV OUT
RS-232C IN
(CONTROL & SERVICE)
AV IN 1
4
Select R G B - P C input source with using the I N P U T
button on the remote control.
(MONO)
S-VIDEO
S-VIDEO
VIDEO
AUDIO
1
Connect the DVI output of the PC to the
H D M I /D
D V I I N jack on the set.
RGB IN
2
Connect the audio outputs of the PC to the
A U D I O ( R G B / D V I ) jack on the set.
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
HDMI/DVI IN
COMPONENT IN
RS-232C IN
(CONTROL & SERVICE)
(MONO)
S-VIDEO
S-VIDEO
3
2
Turn on the PC and the set.
VIDEO
AUDIO
HDMI/DVI IN
1
VIDEO
4
AV OUT
AV IN 1
CONNECTIONS & SETUP
When connecting with a HDMI to DVI cable
2
1
AUDIO
D V I input source
Select H D M I /D
with using the I N P U T button on the remote control.
PC
DVI-DTV OUTPUT
AUDIO
! NOTE
G
G
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
If the PC does not support Auto DVI, you need to set the output resolution appropriately. To
get the best picture quality, adjust the output resolution of PC graphics card's output resolution to 1024x768, 60Hz.
26
VARIABLE
AUDIO OUT
! NOTE
G To
GWe
recommend using 1360*768, 60Hz (32LC2R*,
37LC2R*, 42LC2R*, 32LB1R*, 37LB1R*. 42LB1R*)
for the PC mode, they provide the best picture quality.
G If
the resolution of PC is over UXGA, there will be
no picture on the set.
G Connect
the signal cable from the monitor output
port of the PC to the RGB (PC/DTV) port of the
set or the signal cable from the HDMI output port
of the PC to the HDMI IN port on the set.
G Connect the audio cable from the PC to the
Audio input on the set. (Audio cables are not
included with the set).
G If using a sound card, adjust PC sound as required.
G This set uses a VESA Plug and Play Solution. The
set provides EDID data to the PC system with a
DDC protocol. The PC adjusts automatically when
using this set.
G DDC protocol is preset for RGB (Analog RGB),
HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play
functionally.
G If graphic card on the PC does not output analog
and digital RGB simultaneously, connect only one
of either RGB (PC/DTV) or HDMI IN to display
the PC on the set.
G If graphic card on the PC does output analog and
digital RGB simultaneously, set the set to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the set.)
G DOS mode may not work depending on video
card if you use a HDMI to DVI cable.
G When you use too long RGB-PC cable, there
might be a noise on the screen. We recommend
using under 5m of the cable. It provides the best
picture quality.
CONNECTIONS & SETUP
enjoy vivid picture and sound, connect a PC to
the set.
G Avoid keeping a fixed image on the set’s screen for
a long period of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
G Connect PC to the RGB (PC/DTV) or HDMI IN
port of the set; change the resolution output of
PC accordingly.
G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC
mode. Change the PC mode into another resolution or change the refresh rate into another rate
or adjust the brightness and contrast on the
menu until the picture is clean. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult it to the
manufacturer of the PC graphic card.
synchronization input waveform for
G The
Horizontal and Vertical frequencies are separate.
G In 42PC1R*, 50PC1R*, 50PC3R* models, we recommend using 1024x768, 60Hz for the PC mode,
they provide the best picture quality.
27
CONNECTIONS & SETUP
Supported Display Resolution
(32LC2R*, 37LC2R*, 42LC2R*, 32LB1R*, 37LB1R*,
42LB1R*) RGB[PC] / HDMI[PC] mode
CONNECTIONS & SETUP
28
Supported Display Resolution
(42PC1R*, 50PC1R*, 50PC3R*)
RGB[PC] / HDMI[PC] mode
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x400
31.469
70.08
640x350
31.468
70.09
640x480
31.469
37.500
59.94
75.00
720x400
31.469
70.08
800x600
37.879
46.875
60.31
75.00
640x480
31.469
35.00
37.861
37.500
59.94
66.66
72.80
75.00
832x624
49.725
74.55
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
848x480
31.5
37.799
39.375
60.00
70.00
75.00
1280x768
47.693
59.99
852x480
31.5
37.799
39.975
1360x768
60.00
70.00
75.00
47.700
60.00
832x624
49.725
1366x768
74.55
47.700
60.00
800x600
37.897
48.077
46.875
60.31
72.18
75.00
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
1280x1024
63.981
60.02
1280x768
47.693
60.091
59.99
74.93
1360x768
47.700
59.625
60.00
75.02
1366x768
47.700
59.625
60.00
75.02
TURNING THE TV ON
INPUT
TV
INPUT
TV
POWER
If your TV will be turned on, you will be able to use its features.
DVD
VCR
ARC
TEXT
Turning on the TV
1
PIP PR-
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■ In standby mode to turn TV on, press the
, INPUT,
P R D / E button on the TV or press the
POWER, T V, INPUT, PR +/-, Number(0~9
9 ) button on
the remote control and then the TV will switch on.
PIP
SIZE
POSTION
PIP PR+
SWAP
PIP INPUT
LIST
MENU
EXIT
SLEEP
OK
Volume Adjustment
1
Press the VOL +/- button to adjust the volume.
2
If you want to switch the sound off, press the MUTE button.
Q.VIEW
VOL
MUTE
You can cancel this function by pressing the M U T E, VOL +/- or
I/II button.
Programme selection
1
PR
1
2
3
4
5
6
7
8
9
*
10
FAV
TIME
REVEAL
?
INDEX
Press the PR +/- or NUMBER button to select a
programme number.
CONNECTIONS & SETUP
3
I/II
On-Screen Menu Language Selection (option)
- The menus can be shown on the screen in the selected language. First select your language.
1
Press the M E N U button and then use D / E button to select the
SPECIAL menu.
2
Press the G button and then use D / E button to select Language.
3
Press the G button and then use D / E button to select your
desired language. From this point on, the on-screen menus will
be shown in the language of your choice.
4
Press the E X I T button to return to normal TV viewing.
! NOTE
G
If you intend to be
away on vacation,
disconnect the
power plug from wall
power outlet.
29
SPECIAL FUNCTIONS
PIP (PICTURE-IN-PICTURE) /
DOUBLE WINDOW / POP
PIP lets you view 2 different inputs (sources) on your TV screen
at the same time. One source will be large, and the other source
will show a smaller inset image.
ARC
VCR
TEXT
PIP PR-
PIP
SIZE
POSTION
PIP PR+
SWAP
PIP INPUT
Double window mode splits the screen into 2, allowing 2 picture
sources to be shown on the TV screen at the same time. Each
source is given half the screen.
LIST
MENU
EXIT
I/II
SLEEP
OK
Watching PIP/Double Window/POP
Press the P I P button to access the sub picture. Each press of PIP changes the PIP options as shown below.
PIP Mode
DW1 Mode
DW2 Mode
SPECIAL FUNCTIONS
POP Mode
PIP Off
Programme Selection for Sub Picture
Press the P I P P R + / - button to select a programme for the sub picture.
The sub picture programme selection is not available in TV mode for main and sub picture simultaneously.
(This feature is not available for all models.)
30
Input Source Selection for Sub Picture
Press the P I P I N P U T button to select the input source for the sub picture.
Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed as shown below.
TV
AV1
HDMI/DVI
AV2
RGB
Component1
Component2
Sub Picture Size Adjustment (PIP mode only)
Repeatedly press the S I Z E button to select the desired sub picture size.
Moving the Sub Picture (PIP mode only)
Press the P O S I T I O N button repeatedly until desired position is
achieved. The sub picture moves clockwise.
1
Press the M E N U button and then D /
the SCREEN menu.
2
Press the G button and then D /
PIP Transparency.
3
Press the G button and then F /
E
G
E
button to select
SPECIAL FUNCTIONS
Adjusting PIP Transparency (PIP mode only)
button to select
button to adjust PIP
Transparency.
4
Press the E X I T button to return to normal TV viewing.
31
SPECIAL FUNCTIONS
PIP (PICTURE-IN-PICTURE) /
DOUBLE WINDOW / POP
Swapping between main and sub pictures
Press the S W A P button to exchange the main and sub pictures.
SWAP
Main Picture
Sub Picture
POP (Picture-out-of-Picture: Programme Scan)
SPECIAL FUNCTIONS
32
Use POP to search the programmes of all the memorized channels
one-by-one on the 3 POP screen display, (while the main picture
source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen.
When watching TV for main picture, same TV programme for sub
pictures are scanned. (This feature is not available for all models.)
TELETEXT
■
This feature is not available for all countries.
Teletext (or TOPtext) is an optional function, therefore only a setwith the teletext system can receive the teletext
broadcast.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext)
consists of a number of pages which are selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of teletext information.
Switch on/off
Press the T E X T button to switch to teletext. The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T or E X I T button to switch off teletext. The previous mode reappears.
SIMPLE Text
A Page selection
SPECIAL FUNCTIONS
1. Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
2. The PR +/- button can be used to select the preceding or following page.
33
SPECIAL FUNCTIONS
TOP Text
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P R + button can be used.
4. The red button permits to return to previous selection. Alternatively the P R - button can be used.
A Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
SPECIAL FUNCTIONS
34
1. Press the i INDEX button to select the index page.
2. You can select the pages which are colour coded along the bottom line with the same coloured buttons.
3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number
with the NUMBER buttons in FASTEXT mode.
4. The P R + / - button can be used to select the preceding or following page.
Special Teletext Functions
A REVEAL
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
A SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
A UPDATE
Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top
left hand corner of the screen. When the updated page is available then display will change to the page number.
Press this button to view the updated teletext page.
A TIME
A HOLD
SPECIAL FUNCTIONS
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN, F / G or NUMBER buttons.
Press again to exit this function.
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inhibited.
To continue press this button again.
35
TV MENU
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
1
Press the M E N U button and then D / E button to display each menu.
2
Press the G button and then D / E button to select a menu item.
3
Change the setting of an item in the sub or pull-down menu with F / G button.
You can move to the higher level menu by pressing the O K or M E N U button.
STATION
Auto programme
STATION
PSM
PICTURE
Manual programme
PICTURE
CSM
SOUND
TIME
Programme edit
Favourite prog.
SOUND
TIME
SPECIAL
SPECIAL
SCREEN
SCREEN
Menu Prev.
PICTURE
SOUND
TIME
Reset
Menu Prev.
STATION menu
STATION
Advanced
Auto config.
Manual config.
XGA Mode
ARC
PICTURE menu
STATION
SSM
PICTURE
AVL
SOUND
Balance
TIME
Speaker
SPECIAL
PIP Transparency
SPECIAL
SCREEN
Reset
SCREEN
Menu Prev.
Menu Prev.
SCREEN menu
SOUND menu
STATION
Language
STATION
Clock
PICTURE
Child lock
PICTURE
Off time
SOUND
On time
SOUND
TIME
SPECIAL
SCREEN
0
ISM Method
Low Power
TIME
Auto sleep
SPECIAL
Set ID
Demo
TV MENU
Menu Prev.
SCREEN
Menu Prev.
SPECIAL menu
TIME menu
! NOTE
a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.
b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to
help the TV operation.
(The OSD mainly use pictures for the 42PC1R*, 50PC1R*, 50PC3R*.)
c. In the teletext mode, menus are not displayed.
d. In some models, XGA will display on the SCREEN menu.
e. It’s not available to use ISM Method and Low Power in 32LC2R*, 37LC2R*, 42LC2R*, 32LB1R*,
37LB1R*, 42LB1R*.
36
TV MENU
Setting up TV stations
AUTO PROGRAMME TUNING
LIST
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the PR +/- or
NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Press the M E N U button and then D /
STATION menu.
I/II
SLEEP
OK
All stations that can be received are stored by this method.
It is recommended that you use auto programme during installation of
this set.
1
MENU
EXIT
Q.VIEW
VOL
PR
MUTE
E button to select the
Auto programme
Manual programme
2
Press the G button and then D /
programme.
E button to select Auto
3
Press the G button and then D /
E button to select System.
4
Press the F / G button to select a TV system menu;
L : SECAM L/L’ (option)
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia
/ New Zealand / M.East / Africa / Australia)
I
: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines) (option)
5
Press the D /
6
Press the F / G button or N U M B E R buttons to select the
beginning programme number. If you use NUMBER buttons, any
number under 10 is entered with a numeric ‘0’ in front of it,
0 5’ for 5.
i.e.‘0
7
Press the D /
E button to select Storage
E button
Programme edit
Favourite prog.
1
Auto programme
Manual programme
Programme edit
G
System
Storage from
Start
BG
1
Favourite prog.
from.
to select Start.
2
C 05
System
BG
50%
Menu
Stop
TV MENU
9
5
Press the G button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the M E N U button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the Programme edit section
to edit the stored programme.
7
Auto programme
Name
Storage from
8
~
8
Press the E X I T button to return to normal TV viewing.
37
TV MENU
Setting up TV stations
MANUAL PROGRAMME TUNING
LIST
MENU
I/II
EXIT
SLEEP
Manual programme lets you manually tune and arrange the stations
in whatever order you desire.
OK
Q.VIEW
VOL
1
2
MUTE
E
button to select the
Press the G button and then D /
E button to select Manual
button and then D /
E button to select Storage.
programme.
3
Press the
4
Press the F / G button or NUMBER buttons to select the
desired programme number (0 to 99). If you use NUMBER
buttons, any number under 10 is entered with a numeric ‘0’ in
0 5’ for 5.
front of it, i.e. ‘0
5
6
Press the D /
7
8
9
10
TV MENU
38
Press the M E N U button and then D /
STATION menu.
11
12
PR
G
E
Auto programme
Manual programme
Programme edit
Favourite prog.
button to select System.
Press the F / G button to select a TV system menu;
L : SECAM L/L’ (option)
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia
/ New Zealand / M.East / Africa / Australia)
I
: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines) (option)
Press the D /
E
button to select Band.
Press the F /
G
button to select V/UHF or Cable.
1
Auto programme
Manual programme
Programme edit
Favourite prog.
G
Storage
System
Band
Channel
Fine
Search
Name
Booster
Press the D /
E button
E
C 05
Off
to select Channel.
You can select the desired programme number with the F / G
button or number buttons. If possible, select the programme
number directly with the number buttons. Any number under 10
0 5’ for 5.
is entered with a numeric ‘0’ in front of it, i.e. ‘0
Press the D /
5
BG
V/UHF
5
button to select Search.
Press the F / G button to commence searching. If a station is
found the search will stop.
13
14
Press the O K button to store it.
15
Press the E X I T button to return to normal TV viewing.
To store another station, repeat steps 3 to 1 3.
2
~
13
FINE TUNING
LIST
MENU
I/II
EXIT
SLEEP
Normally fine tuning is only necessary if reception is poor.
OK
Q.VIEW
VOL
PR
MUTE
1
Press the M E N U button and then D /
E
1
2
3
4
5
6
button to select the
STATION menu.
2
Press the G button and then D /
E button to select Manual
Auto programme
Manual programme
programme.
Programme edit
Favourite prog.
3
Press the G button and then D /
4
Press the F /
and sound.
G
E
button to select Fine.
button to to fine tune for the best picture
1
5
Press the O K button to store it.
Auto programme
Manual programme
6
Press the E X I T button to return to normal TV viewing.
Programme edit
Favourite prog.
Storage
System
Band
Channel
Fine
Search
Name
5
BG
V/UHF
5
FG
C 05
Off
Booster
2
~
5
TV MENU
Store
39
TV MENU
Setting up TV stations
ASSIGNING A STATION NAME
LIST
I/II
MENU
EXIT
SLEEP
You can assign a station name with five characters to each
programme number.
OK
Q.VIEW
VOL
PR
MUTE
1
Press the M E N U button and then D /
STATION menu.
2
Press the G button and then D /
E
1
2
3
4
5
6
button to select the
E button to select Manual
Auto programme
programme.
Manual programme
Programme edit
Favourite prog.
3
Press the G button and then D /
4
Press the G button and then D /
E button
E
to select Name.
button. You can use a
blank, + , - , the number 0 to 9 and the alphabet A to Z.
1
5
Press the F /
G
button to select the position and make
your choice of the second character, and so on.
Auto programme
Manual programme
Programme edit
Favourite prog.
6
7
Press the O K button to store it.
Press the E X I T button to return to normal TV viewing.
Storage
System
Band
Channel
Fine
Search
Name
G
C 05
Off
Booster
Store
TV MENU
40
5
BG
V/UHF
5
G
Edit
2
~
6
BOOSTER (Option)
LIST
In some models, B o o s t e r is an optional function. Only a set
with B o o s t e r can perform this function.
MENU
I/II
EXIT
SLEEP
If the reception is poor at the fringe area of TV signal, select
B o o s t e r to O n.
OK
Q.VIEW
VOL
PR
MUTE
1
2
3
Auto programme
1
2
Press the M E N U button and then D /
the STATION menu.
Press the G button and then use D /
E
Manual programme
button to select
Programme edit
Favourite prog.
E
button to select
Booster.
1
3
Press the G button and then use D /
E
button to select
On or Off.
Auto programme
Manual programme
Programme edit
Favourite prog.
4
Press the E X I T button to return to normal TV viewing.
Storage
System
Band
Channel
Fine
Search
Name
Booster
5
BG
V/UHF
5
FG
C 05
On
2 3
TV MENU
Store
41
TV MENU
Setting up TV stations
PROGRAMME EDIT
LIST
MENU
I/II
EXIT
SLEEP
This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected
programme number.
OK
Q.VIEW
VOL
PR
MUTE
1
1
Press the M E N U button and then D /
STATION menu.
2
Programme edit.
Press the G button and then D /
E
E
2
3
button to select the
button to select
Auto programme
3
Press the G button to display the Programme edit menu.
Manual programme
Programme edit
Deleting a programme
1.Select a programme to be deleted with the
D / E / F / G button.
2.Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
A Copying a programme
1.Select a programme to be copied with the D / E / F / G
button.
2.Press the GREEN button.
All the following programmes are shifted down one position.
A Moving a programme
1.Select a programme to be moved with the D / E / F / G
button.
2.Press the YELLOW button.
3.Move the programme to the desired programme number
with the D / E / F / G button.
4.Press the YELLOW button again to release this function.
A Skipping a programme number
1.Select a programme number to be skipped with the D / E
/ F / G button.
2.Press the BLUE button. The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you
will be unable to select it using the D / E button during
normal TV viewing. If you want to select the skipped pro
gramme, directly enter the programme number with the
NUMBER buttons or select it in the programme edit or
table menu.
A
TV MENU
4
42
Press the E X I T button to return to normal TV viewing.
Favourite prog.
1
Auto programme
Manual programme
Programme edit
To set
G
Favourite prog.
2
Programme edit
0
C 02
5
S 15
1
C 04
6
S 16
2
C 05
7
S 17
3
C 06
8
S 18
4
S 14
9
S 19
Delete
Move
Copy
Skip
Menu Prev.
Menu Prev.
3
FAVOURITE PROGRAMME
LIST
I/II
MENU
EXIT
SLEEP
This function lets you select your favourite programmes
directly.
Repeatedly press the F A V button to select stored favourite
programmes.
OK
Q.VIEW
VOL
PR
MUTE
1
2
Press the M E N U button and then D /
the STATION menu.
Press the G button and then D /
Favourite programme.
E
E
button to select
1
2
3
4
5
6
7
8
9
*
10
FAV
button to select
Auto programme
Manual programme
Programme edit
3
Press the G button.
4
Press the D /
5
Select a desired programme with the F / G button or
NUMBER buttons. Any number under 10 is entered with a
0 5’ for 5.
numeric ‘0’in front of it, i.e.‘0
E
Favourite prog.
button to select - - - - - - - -.
1
Auto programme
Manual programme
Programme edit
6
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
7
Press the E X I T button to return to normal TV viewing.
Favourite prog.
G
-
-
-
-
-
-
-
-
~
6
TV MENU
2
43
TV MENU
Setting up TV stations
CALLING THE PROGRAMME TABLE
LIST
MENU
EXIT
I/II
SLEEP
You can check the programmes stored in the memory by
displaying the programme table.
OK
Q.VIEW
VOL
A
Displaying programme table
PR
MUTE
Press the L I S T button to display the Programme table menu.
1
2
3
The programme table appears on the screen.
One programme table contains ten programmes as below.
! NOTE
A
a. You may find some blue programmes. They have been set up
Programme List
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
0
C 02
5
S 15
1
C 04
6
S 16
2
C 05
7
S 17
3
C 06
8
S 18
4
S 14
9
S 19
Selecting a programme in the programme table
Select a programme with the D / E / F / G button.
Then press the O K button. The set switches to the chosen
programme number.
A
Paging through a programme table
There are 10 programme table pages in which contain 100 programmes.
Pressing the D / E / F / G button repeatedly turns the pages.
Press the L I S T button to return to normal TV viewing.
TV MENU
44
TV MENU
Picture Menu
PSM (Picture Status Memory)
LIST
MENU
EXIT
Dynamic
Standard
Mild
Select this option to display with a sharp image.
The most general and natural screen display status.
Select this option to display with a mild image.
User 1/2
Select this option to use the user-defined setting.
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
1
1
Press the M E N U button and then D /
the PICTURE menu.
E
2
3
button to select
PSM
CSM
2
3
Advanced
Press the G button and then D /
E
button to select PSM.
Press the G button and then D /
E
button to select
Reset
Intelligent Eye (only 32LB1R*/ 37LB1R*/ 42LB1R*)
1
Dynamic, Standard, Mild, User 1, or User 2.
PSM
CSM
4
Press the E X I T button to return to normal TV viewing.
Advanced
G
Dynamic
Standard
Mild
User 1
User 2
Reset
• PSM adjusts the TV for the best picture appearance.
Select the preset value in the PSM menu based on the
programme category.
• Picture options I n t e l l i g e n t E y e (only 32LB1R*/
37LB1R*/ 42LB1R*), D y n a m i c, S t a n d a r d, M i l d and
U s e r are preset and programmed for good picture quality at the factory and cannot be changed.
2
~
5
TV MENU
• When adjusting User options (contrast, brightness,
colour, and sharpness, tint) manually, PSM automatically
changes to U s e r.
• When the Intelligent eye function is on, the most suitable pic
ture is automatically adjusted according to the surrounding
con ditions. (only 32LB1R*/ 37LB1R*/ 42LB1R*)
45
TV MENU
Picture Menu
PICTURE ADJUSTMENT (PSM-User option)
LIST
MENU
I/II
EXIT
Contrast
SLEEP
Adjusts the difference between the light and dark levels in the
picture.
OK
B r i g h t n e s s Increases or decreases amount of white in the your picture.
Q.VIEW
Colour
Adjusts intensity of all colours.
Sharpness
Adjusts the level of crispness in the edges between the light
and dark areas of the picture. The lower the level, the softer
the image.
Tint
VOL
PSM
CSM
Advanced
Adjusts the balance between red and green levels.
1
Press the M E N U button and then D /
the PICTURE menu.
2
Press the G button and then D /
E
button to select PSM.
3
Press the G button and then D /
1, or User 2.
E
button to select User
4
Press the G button and then D / E button to select the
desired picture option (Contrast, Brightness, Colour,
Sharpness, or Tint).
E
Reset
button to select
5
Press the F /
6
Press the E X I T button to return to normal TV viewing.
G
PR
1
Dynamic
Standard
Mild
User 1
User 2
PSM
CSM
Advanced
G
Reset
2 3
button to make appropriate adjustments.
User 1
TV MENU
Contrast
Brightness
Colour
Sharpness
Tint
100
50
50
50
0
G
R
G
4 5
! NOTE
- You can’t adjust, colour, sparpness and tint in the RGB-PC, HDMI-PC mode to the levels you prefer.
46
CSM (Colour Status Memory)
LIST
To initialize values (reset to default settings), select the C o o l
option.
MENU
EXIT
I/II
SLEEP
Choose one of three automatic colour adjustments. Set to
warm to enhance hotter colours such as red, or set to cool to
see less intense colours with more blue.
OK
Q.VIEW
VOL
PR
MUTE
1
1
Press the M E N U button and then D /
the PICTURE menu.
2
Press the G button and then D /
E
E button
2
3
button to select
to select CSM.
PSM
3
Press the G button and then D /
E
CSM
button to select
Advanced
either Cool, Normal, Warm, or User.
4
Reset
Press the E X I T button to return to normal TV viewing.
1
PSM
CSM
Advanced
Reset
G
Cool
Normal
Warm
User
TV MENU
2 3
47
TV MENU
Picture Menu
MANUAL COLOUR TEMPERATURE
CONTROL (CSM - User option)
LIST
MENU
EXIT
You can adjust red, green, blue to any colour temperature you prefer.
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
1
1
Press the M E N U button and then D /
the PICTURE menu.
E
button to select
2
3
PSM
CSM
Advanced
2
Press the G button and then D /
E
button to select CSM.
3
Press the G button and then D /
E
button to select User.
4
Press the G button and then D /
E
button to select
Red, Green, or Blue.
Reset
1
PSM
CSM
5
Press the F /
G
button to make appropriate adjustments.
Cool
Normal
Warm
User
Advanced
Reset
6
G
Press the E X I T button to return to normal TV viewing.
2
TV MENU
User
Red
Green
Blue
0
0
0
G
3 ~ 5
48
FUNCTION
LIST
MENU
I/II
EXIT
SLEEP
XD is LG electronic's unique picture improving technology to display
a real HD source through an advanced digital signal processing
algorithm.
OK
This menu is activatived after selecting the U s e r 1 or U s e r 2 of
PSM.
Q.VIEW
VOL
PR
MUTE
1
Press the M E N U button and then D /
the PICTURE menu.
2
Press the G button and then D /
E
E
button to select
1
2
3
button to select XD.
PSM
3
Press the G button and then D /
E
CSM
button to select
Advanced
Manual.
Reset
4
Press the G button and then D /
E
button to select
X D Contrast, XD Colour, XD NR or MPEG NR.
5
Press the G button and then F /
G
1
button to make
appropriate adjustments.
PSM
CSM
G
6
Press the E X I T button to return to normal TV viewing.
Advanced
Reset
Auto
Manual
XD Contrast
On
XD Colour
On
XD NR
Off
MPEG NR
0
2 3
TV MENU
• X D C o n t r a s t : Optimizing the contrast auto-matically
according to the brightness of the reflection.
• X D C o l o r : Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors.
• X D N R : Removing the noise up to the point where it
does not damage the original picture.
• M P E G N R :To reduce the picture noise which may
appear on the screen during watching the TV.
(It’s not available to use this function in HDMI,
Component(except 480i/576i), RGB-PC modes.)
49
TV MENU
Picture Menu
ADVANCED
LIST
MENU
I/II
EXIT
SLEEP
When you watch the movie, this function adjusts the set to
the best picture appearance. Adjusting the contrast and the
brightness of the screen using the black level of the screen.
OK
Cinema- function works in the following mode:
TV, AV1, AV2 or Component1/2 480i/576i.
Q.VIEW
Black Level- function works in the following mode:
VOL
PR
AV(NTSC), HDMI[PC/DTV].
MUTE
1
1
Press the M E N U button and then D /
the PICTURE menu.
E
2
3
button to select
PSM
CSM
Advanced
2
Press the G button and then D /
E button to select Advanced.
3
Press the G button and then D /
or Black Level.
E button to select
Reset
Cinema
1
4
Press the G button and then D /
Low or high.
E button to select On,
Off,
• L o w : The reflection of the screen gets darker.
• H i g h : The reflection of the screen gets brighter.
PSM
CSM
Advanced
Reset
G
Cinema
Off
Black level
Auto
5
TV MENU
50
Press the E X I T button to return to normal TV viewing.
2 4
RESET
LIST
MENU
EXIT
I/II
SLEEP
OK
1
Press the M E N U button and then D /
the PICTURE menu.
E
button to select
2
Press the G button and then D /
3
Press the G button to initialize the adjusted value.
E
Q.VIEW
VOL
PR
MUTE
button to select Reset.
1
• Returns to the default settings PSM, CSM, XD, Advanced
2
3
PSM
at the factory.
CSM
Advanced
Reset
1
PSM
CSM
Advanced
Reset
G
To set
TV MENU
2 3
51
TV MENU
Sound Menu
SSM (Sound Status Memory)
LIST
MENU
I/II
EXIT
SLEEP
You can select your preferred sound setting; Surround MAX,
Flat, Music, Movie or Sports and you can also adjust the sound
frequency of the equalizer.
OK
SSM lets you enjoy the best sound without any special adjustment
because the TV sets the appropriate sound options based on
the programme content.
Q.VIEW
VOL
When adjusting sound equalizer manually, SSM automatically
switches U s e r.
PR
MUTE
1
2
3
S u r r o u n d M A X, F l a t, M u s i c, M o v i e, and S p o r t s are preset
for good sound quality at the factory and are not adjustable.
S u r r o u n d M A X Select this option to sound realistic.
Flat
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when lis
tening to the music.
Movie
Select this option to enjoy sublime sound.
Sports
Select this option to watch sports broadcasting.
User
Select this option to use the user-defined audio settings.
SSM
AVL
Balance
0
Speaker
1
SSM
1
TV MENU
52
Press the M E N U button and then D /
the SOUND menu.
E
button to select
2
Press the G button and then D /
3
Press the G button and then D / E button to select
Surround MAX, Flat, Music, Movie, Sports, or User.
4
E
G
AVL
Balance
Speaker
0
Surround MAX
Flat
Music
Movie
Sports
User
button to select SSM.
Press the E X I T button to return to normal TV viewing.
2 3
TV MENU
Sound Menu
SOUND FREQUENCY ADJUSTMENT
(SSM - User option)
LIST
MENU
I/II
EXIT
SLEEP
OK
Adjust the sound equalizer.
Q.VIEW
VOL
1
Press the M E N U button and then D /
the SOUND menu.
E
MUTE
button to select
2
Press the G button and then D /
E
button to select SSM.
3
Press the G button and then D /
E
button to select User.
4
Press the G button.
PR
1
2
3
4
5
6
SSM
AVL
Balance
5
Select a sound band by pressing the D /
E
Make appropriate sound level with the F /
6
0
Speaker
button.
G
button.
Press the E X I T button to return to normal TV viewing.
1
SSM
G
AVL
Balance
Speaker
0
Surround MAX
Flat
Music
Movie
Sports
User
~
4
User
120Hz
200Hz
500Hz
1.2KHz
3KHz
7.5KHz
12KHz
F
TV MENU
2
G
5
53
TV MENU
Sound Menu
AVL (Auto Volume Leveler)
LIST
MENU
EXIT
I/II
SLEEP
AVL automatically keeps on an equal volume level even if you
change programmes.
OK
Q.VIEW
VOL
1
Press the M E N U button and then D /
the SOUND menu.
2
Press the G button and then D /
E
E
PR
button to select
SSM
button to select AVL.
AVL
Balance
3
Press the G button and then D /
4
Press the E X I T button to return to normal TV viewing.
0
Speaker
E button to select On or Off.
1
SSM
AVL
G
Balance
0
On
Off
Speaker
BALANCE ADJUSTMENT
2 3
You can adjust the sound balance of speaker to the levels you
prefer.
TV MENU
SSM
1
2
Press the M E N U button and then D /
the SOUND menu.
Press the G button and then D /
E
button to select
AVL
Balance
0
G
L
R
2 3
Speaker
E button to select Balance.
2 3
54
3
Press the G button and then F /
desired adjustment.
4
Press the E X I T button to return to normal TV viewing.
G
button to make
2 3
SPEAKER
You can adjust the internal speaker status.
In AV1, AV2,COMPONENT1, COMPONENT2, RGB and
HDMI/DVI with HDMI to DVI cable, TV speaker and/or variable audio can be outputted even though there is no video
signal.
If you want to use your external hi-fi stereo system, turn off
the internal speakers of the set.
LIST
MENU
EXIT
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
1
Press the M E N U button and then D /
the SOUND menu.
2
Press the G button and then D /
3
Press the G button and then D /
E
button to select
E button to select Speaker.
E
SSM
button to select
AVL
On or Off.
Balance
0
Speaker
4
Press the E X I T button to return to normal TV viewing.
1
SSM
AVL
Balance
Speaker
G
On
Off
TV MENU
2 3
55
TV MENU
Sound Menu
STEREO/DUAL RECEPTION
When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
DUAL I
DUAL II
DUAL I+II
LIST
MENU
EXIT
Sends the primary broadcast language to the
loudspeakers.
Sends the secondary broadcast language to the
loudspeakers.
Sends a separate language to each loudspeaker.
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
1
Broadcast
Mono
Stereo
Dual
TV MENU
56
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono by pressing the I / I I button twice. In mono reception, the
depth of sound is improved. To switch back to stereo, press the
I / I I button twice again.
A
Language selection for dual language broadcast
If a programme received two languages (dual language), you can
switch to D U A L I, D U A L I I or D U A L I + I I by pressing the I / I I
button repeatedly.
2
3
On Screen Display
MONO
STEREO
DUAL I
NICAM RECEPTION
If the set is equipped with the receiver for NICAM reception, the high quality NICAM
(Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM MONO or FM MONO.
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM mono.
When NICAM dual is received, you can select N I C A M DUAL I, NICAM DUAL II or
NICAM DUAL I+II or MONO.
SPEAKER SOUND OUTPUT SELECTION
In AV1, AV2, Component1, Component2, RGB, HDMI/DVI mode, you can select output sound
for the left and right loudspeakers.
TV MENU
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio
R input is sent to the right loud speaker.
L+L: Audio signal from audio L input is sent to left and right loud speakers.
R+R: Audio signal from audio R input is sent to left and right loud speakers.
57
TV MENU
Time Menu
CLOCK SETUP
LIST
MENU
I/II
EXIT
SLEEP
You must set the time correctly before using on/off time function.
OK
If current time setting is erased by a power failure or the set is
unplugged, reset the clock. After approx. 5 minutes.
Q.VIEW
VOL
PR
MUTE
1
Press the M E N U button and then D /
select the TIME menu.
Press the G button and then D /
E
E button
2
3
button to
Clock
to select Clock.
Off time
On time
Auto sleep
Press the G button and then D /
E button
Press the G button and then D /
minutes.
E
to set the hour.
button to set the
Press the E X I T button to return to normal TV viewing.
1
Clock
G
--
:
--
Off time
On time
Auto sleep
TV MENU
58
2 3
ON/OFF TIME
LIST
I/II
MENU
EXIT
SLEEP
The Off time automatically switches the set to standby at the
preset time.
OK
Two hours after the set is switched on by the on time function
it will automatically switch back to standby mode unless a button has been pressed.
Q.VIEW
VOL
PR
Once the on time/off time is set, these functions operate daily
at the preset time.
MUTE
1
2
3
Off time function overrides On timer function if they are set
both to the same time.
The set must be in standby mode for the On timer to work.
Clock
Off time
Press the M E N U button and then D /
select the TIME menu.
Press the G button and then D /
Off time/On time.
E
E
On time
button to
Auto sleep
button to select
1
Press the G button and then D / E button to select On.
• To cancel On/Off timer function, select Off.
Clock
Off time
G
On time
--
Auto sleep
Press the G button and then D /
On
Off
:
--
E button to set the hour.
Press the G button and then D /
minutes.
E
button to set the
For only On timer function
• P r o g r a m m e: Press the G button and then D / E button to select the programme.
• V o l u m e: Press the G button and then D / E button to
adjust volume level at turn-on.
Clock
Off time
On time
Auto sleep
G
TV MENU
2 3
On
Off
18
Volume
Programme
:
00
30
0
Press the E X I T button to return to normal TV viewing.
4 5 6
59
TV MENU
Time Menu
AUTO SLEEP
LIST
MENU
EXIT
If set to on and there is no input signal, the TV turns off automatically
after 10 minutes.
I/II
SLEEP
OK
Q.VIEW
VOL
1
Press the M E N U button and then D /
E
PR
button to select
the TIME menu.
Clock
2
Press the G button and then D /
3
Press the G button and then D /
4
Press the E X I T button to return to normal TV viewing.
E button to select Auto sleep.
Off time
On time
Auto sleep
E button to select On or Off.
1
Clock
Off time
SLEEP TIMER
On time
Auto sleep
G
On
Off
You don’t have to remember to switch the set off before you go
to sleep.
The sleep timer automatically switches the set to standby after
the preset time has elapsed.
1
2 3
Press the S L E E P button repeatedly to select the number
of minutes. The display ‘ z z - - - ’ will appear on the
screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
TV MENU
• When the number of minutes you want is displayed on
the screen, the timer begins to count down from the
number of minutes selected.
zz
• To view the remaining sleep time, press the S L E E P but
ton once.
• To cancel the sleep time, repeatedly press the S L E E P
but ton until the display ‘ z z - - - ’ appears.
• When you switch the set off, the set releases the preset
sleep time.
60
------ Min
TV MENU
Special Menu
CHILD LOCK
The TV can be set so that the remote control is needed to
control it.
This feature can be used to prevent unauthorized viewing.
This set is programmed to remember which option it was last
set to even if you turn the set off.
LIST
MENU
EXIT
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
1
Press the M E N U button and then D /
the SPECIAL menu.
2
Press the G button and then D /
Child lock.
E
E
button to select
1
2
3
button to select
Language
Child lock
ISM Method
3
4
Press the G button and then D /
On or Off.
E
Low Power
button to select
Set ID
Demo
Press the E X I T button to return to normal TV viewing.
1
Language
Child lock
ISM Method
G
On
Off
Low Power
Set ID
Demo
TV MENU
2 3
! NOTE
- In C h i l d l o c k ‘O n’, if the set is turned off, press the r / I, I N P U T, P R D / E button on the set or
P O W E R, I N P U T, T V, P R + / - or NUMBER buttons on the remote control.
- With the C h i l d l o c k O n, the display ‘ C h i l d l o c k o n’ appears on the screen if any button on the
front panel is pressed while viewing the set.
61
TV MENU
Special Menu
ISM (Image Sticking Minimization) METHOD
A frozen of still picture from a PC/video game displayed on the
screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the set's screen for a long period of time.
LIST
MENU
EXIT
I/II
SLEEP
It’s not available to use this function in LCD TV models.
OK
White wash
White wash removes permanent images from the screen.
N o t e : An excessive permanent image may be impossible to
clear entirely with White Wash.
Q.VIEW
VOL
Orbiter
Orbiter may help prevent ghost images. However, it is best
not to allow any fixed image to remain on the screen. To
avoid a permanent image on the screen, the screen will move
every 2 minutes.
PR
MUTE
1
2
3
Inversion
This is the function to invert the panel color of the screen.
The panel color is automatically inverted every 30 minutes.
Language
Child lock
ISM Method
Low Power
Set ID
Demo
1
Press the M E N U button and then D /
select the SPECIAL menu.
E
button to
1
2
TV MENU
62
Press the G button and then D /
ISM Method.
E
button to select
Language
Child lock
ISM Method
Low Power
Set ID
3
Press the G button and then D / E button to select
either Normal, White wash, Orbiter or Inversion.
If you unnecessary to set this function, set Normal.
4
Press the E X I T button to return to normal TV viewing.
Demo
G
Normal
White wash
Orbiter
Inversion
2 3
LOW POWER
LIST
MENU
I/II
EXIT
SLEEP
This is the function to reduce the power consumption of the set.
It’s not available to use this function in LCD TV models
OK
Q.VIEW
VOL
PR
Language
Child lock
1
Press the M E N U button and then D /
select the SPECIAL menu.
E
ISM Method
button to
Low Power
Set ID
Demo
2
Press the G button and then D /
Low power.
E
button to select
3
Press the G button and then D /
On or Off.
E
button to select
4
Press the E X I T button to return to normal TV viewing.
1
Language
Child lock
ISM Method
Low Power
G
Set ID
On
Off
Demo
XD DEMO
2 3
Use it to see the difference between XD Demo on and XD
Demo off.
It’s not available to use this function in RGB[PC], HDMI[PC]
mode.
Language
Child lock
ISM Method
Low Power
TV MENU
Set ID
Demo
1
Press the M E N U button and then use D /
select the SPECIAL menu.
2
Press the G button and then use D /
XD Demo.
E
E
To start
G
button to
button to select
3
Press the G button to begin XD Demo.
4
To stop XD Demo, press the M E N U button.
* In ‘Child lock Off’, to stop ‘XD Demo’, press any
2 3
• XD Demo
XD™ Off
XD™ On
Menu Exit
button on the set.
63
TV MENU
Screen Menu
AUTO CONFIGURE (RGB [PC] mode only)
LIST
MENU
I/II
EXIT
SLEEP
Automatically adjusts picture position and minimizes image
shaking.
OK
Although the image is still not correct, your set is functioning
properly but needs further adjustment.
The A u t o c o n f i g . functions don’t need to be run for HDMI
mode.
Q.VIEW
VOL
Auto configure
PR
MUTE
This function is for the automatic adjustment of the screen position, clock, and phase. The displayed image will unstable for a few
seconds while the auto configuration is in progress.
1
2
3
4
5
6
Auto config.
Manual config.
XGA Mode
ARC
1
Press the M E N U button and then use D /
select the SCREEN menu.
2
Press the G button and then use D /
select Auto config..
E
PIP Transparency
E
button to
Reset
button to
1
Auto config.
Manual config.
3
Press the G button to start Auto config..
G
To Set
XGA Mode
ARC
PIP Transparency
TV MENU
• When Auto config. has finished, O K will be shown on
screen.
• If the position of the image is still not correct, try
Auto adjustment again.
If picture needs to be adjusted more after Auto
adjustment in RGB (PC), you can adjust the
Manual config. .
4
64
Press the E X I T button to return to normal TV viewing.
Reset
2 3
MANUAL CONFIGURE
LIST
MENU
I/II
EXIT
SLEEP
If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
OK
To correct the screen size, adjust C l o c k.
This function works in the following mode : RGB[PC],
RGB[DTV], COMPONENT (480p/576p/720p/1080i),
HDMI/DVI mode.
Q.VIEW
VOL
PR
MUTE
It’s not available to use Phase, Clock function in RGB[DTV],
COMPONENT (480p/576p/720p/1080i), HDMI/DVI
mode.
1
2
3
It’s available to use H/V-Position in HDMI/DVI[DTV]
C l o c k This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also change.
Auto config.
Manual config.
XGA Mode
ARC
P h a s e This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
PIP Transparency
Reset
1
1
Press the M E N U button and then use D /
E
button to
select the SCREEN menu.
3
Press the G button and then D / E button to select
Phase, Clock, H-Position or V-Position.
4
Press the F /
G
E
button to select
button to make appropriate
adjustments.
5
Phase
0
XGA Mode
Clock
0
ARC
H-Position
0
PIP Transparency
V-Position
0
G
Reset
2 ~ 4
TV MENU
2
Press the G button and then D /
Manual config..
Auto config.
Manual config.
Press the E X I T button to return to normal TV viewing.
65
TV MENU
Screen Menu Options
SETTING THE PICTURE FORMAT
ARC
VCR
TEXT
PIP PR-
PIP
SIZE
POSTION
PIP PR+
SWAP
PIP INPUT
You can watch the screen in various picture formats; S p e c t a c l e,
F u l l ( o p t i o n ), O r i g i n a l, 4 : 3, 1 6 : 9 (Wide), 1 4 : 9 and Z o o m 1or
Z o o m 2.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
LIST
MENU
I/II
EXIT
SLEEP
There might be uncomfortable in full mode. Then change into other
mode.
You can adjust the enlarge proportion using D / E button.
OK
This function works in the following signal.
1
Press the M E N U button and then use D /
select the SCREEN menu.
2
Press the G button and then use D /
3
Press the G button and then use D / E button to select
Spectacle, Full(option), Original, 4:3, 16:9, 14:9,
E
E
button to
button to select ARC.
Auto config.
Manual config.
XGA Mode
Zoom1 or Zoom2.
ARC
PIP Transparency
• Spectacle
When your TV receives the wide screen signal, when
selected it will adjust the picture horizontally, in non-linear
proportion, to fill the entire screen.
• F u l l(option)
When your TV receives the wide screen signal, when
selected it will adjust the picture horizontally or vertically,
in a linear proportion, to fill the entire screen fully.
Reset
1
Auto config.
Manual config.
XGA Mode
• Original
When your TV receives the wide screen signal, it will be
automatically changed to the picture format to be sent.
TV MENU
• 4:3
Following selection will lead you to view a picture with an
original 4:3 aspect ratio, with bars appearing at both
the left and right sides.
• 1 6 : 9 (Wide)
Following selection will lead you to adjust the picture hor
izontally, in a linear proportion, to fill the entire screen
(useful for viewing 4:3 formatted DVDs).
• 14:9
You can enjoy the picture format of 14:9 or general TV
programme through the 14:9 mode. The screen 14:9 is viewed
just like that the screen 4:3 is magnified to the left / right.
66
ARC
PIP Transparency
Reset
G
Spectacle
Full
Original
4:3
16:9
14:9
Zoom1
Zoom2
2 3
• Zoom1
Following selection will lead you to view the picture without any
alternation, while filling the entire screen. However, the top and
bottom portions of the picture will be cropped.
• Zoom2
Choose Z o o m 2 when you want the picture to be altered,
both horizontally extended and vertically cropped. The pic
ture taking a halfway trade off between alteration and screen
coverage.
4
A
! NOTE
G
G
You can only select 4 : 3, 1 6 : 9
(Wide) in RGB[PC], HDMI[PC]
mode only.
You can only select 4 : 3, 1 6 : 9
(Wide) and Z o o m 1, Z o o m 2 in
RGB[DTV], HDMI/DVI[DTV],
Component mode only.
Press the E X I T button to return to normal TV viewing.
S c r o l l f u n c t i o n (Option)
Press the A R C button and then use
screen.
Spectacle
D
/
E
button to move
D
E
TV MENU
67
TV MENU
Screen Menu Options
SELECTING WIDE VGA/XGA MODE
LIST
MENU
I/II
EXIT
SLEEP
To see a normal picture, match the resolution of RGB mode
and selection of VGA/XGA mode.
OK
This function works in the following mode: RGB[PC] mode
Q.VIEW
VOL
1
Press the M E N U button and then use D /
select the SCREEN menu.
E
PR
Auto config.
Manual config.
button to
XGA Mode
ARC
PIP Transparency
2
Press the G button and then use D /
XGA Mode (or VGA Mode).
E
button to select
3
Press the G button and then use D /
the desired VGA/XGA resolution.
E
button to select
4
Reset
1
Press the E X I T button to return to normal TV viewing.
Auto config.
Manual config.
XGA Mode
G
ARC
PIP Transparency
Reset
1024x768
1280x768
1360x768
1366x768
2 3
INITIALIZING (Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value
TV MENU
Auto config.
Manual config.
1
Press the M E N U button and then D /
the SCREEN menu.
E
button to select
ARC
PIP Transparency
Reset
2
Press the G button and then D /
Reset.
3
Press the G button.
Ebutton
G
To set
to select
• You can initialize Auto config, Manual config, Position, PIP
size, PIP position, PIP Transparency.
68
XGA Mode
2 3
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
Connect the RS-232C input jack to an external control device (such as a computer or an A/V
control system) and control the TV’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the TV back panel.
RS-232C connection cables are not supplied with the TV.
RS-232C Setup
RGB IN
AUDIO
(RGB/DVI)
HDMI/DVI IN
RS-232C IN
(CONTROL & SERVICE)
AV OUT
AV IN 1
RGB
(PC/DTV)
(MONO)
S-VIDEO
VIDEO
AUDIO
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV OUT
HDMI/DVI IN
RS-232C IN
(CONTROL & SERVICE)
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
AV IN 1
Type of Connector; D-Sub 9-Pin Male
(
S-VIDEO
VIDEO
)
AUDIO
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
5
6
9
APPENDIX
1
69
APPENDIX
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
3-Wire Configurations(Not standard)
TXD
RXD
GND
DSR
DTR
CTS
RTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping 1’. See page 74.
Press the M E N U button and then D /
to select the SPECIAL menu.
Press the G button and then use D /
E
button
E button to select
Language
Child lock
ISM Method
Set ID.
Press the G button and then use F / G button to
adjust Set ID to choose the desired monitor ID number.
Low Power
Set ID
G
Demo
• The adjustment range of Set ID is 1 ~ 99.
Press the E X I T button to return to normal TV viewing.
Communication Parameters
Baud rate : 9600 bps (UART)
■ Data length : 8 bits
■ Parity : None
■
APPENDIX
70
Stop bit : 1 bit
Communication code : ASCII code
■ Use a crossed (reverse) cable.
■
■
1
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
COMMAND1 COMMAND2
01. Power
k
a
0~1
02. Aspect Ratio
k
c
*
03. Screen Mute
k
d
0~1
17. Red Adjustment
04. Volume Mute
k
e
0~1
18. Green Adjustment
DATA
(Hexadecimal)
15. Balance
k
t
0 ~ 64
16. Colour Temperature
k
u
0~3
k
v
0 ~ 3C(or 50)
k
w
0 ~ 3C(or 50)
05. Volume Control
k
f
0 ~ 64
19. Blue Adjustment
k
$
0 ~ 3C(or 50)
06. Contrast
k
g
0 ~ 64
20. Abnormal Status
k
z
0~a
07. Brightness
k
h
0 ~ 64
21. ISM Method
j
p
0~3
08. Colour
k
i
0 ~ 64
22. Low Power
j
q
0~1
09. Tint
k
j
0 ~ 64
23. Orbiter Time Setting
j
r
1 ~ FE
10. Sharpness
k
k
0 ~ 64
24. Orbiter Pixel Setting
j
s
1~3
11. OSD Select
k
k
l
m
0~1
25. Auto Configure
j
u
1
0~1
26. Channel Select Command
m
a
*
27. Send IR Code
m
c
Key Code
13. PIP/DW
k
n
*
28. Input select (Main)
x
b
*
14. PIP Position
k
q
0~3
29. Input select (PIP)
x
y
*
12. Remote Control
lock mode
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j,k,mor x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the seIDtochoosedesired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected the TV
is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63)
on transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of comand.
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions
or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
APPENDIX
[Cr] : Carriage Return
OK Acknowledgement
71
APPENDIX
0 5 . Volume Control (Command2:f)
0 1 . Power (Command2:a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
Data 1 : Power On
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 74
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
06. Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command2:c) (Main picture size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or
in the SCREEN menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Date 1: Normal screen (4:3)
Date 2: Wide screen (16:9)
Date 3: Spectacle
Date 4: Full screen (Zoom1)
Date 5: Full screen (Zoom2)
Date 6: Original
Date 7: Wide screen (14:9)
Date 8: Full (Option)
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command2:h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
08. Colour (Command2:i)
0 3 . Screen Mute (Command2:d)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
To select screen mute on/off.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
09. Tint (Command2:j)
04. Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
APPENDIX
72
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on)
Data 1 : Volume mute on (Volume off)
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
10. Sharpness (Command2:k)
15. Balance (Command2:t)
To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
To adjust balance.
You can also adjust balance in the SOUND menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 74
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [k][ ][Set ID][ ][OK][Data][x]
11. OSD Select (Command2:l)
Acknowledgement [t][ ][Set ID][ ][OK][Data][x]
16. Color Temperature (Command2:u)
To select OSD (On Screen Display) on/off when controlling remotely.
To adjust color temperature.
You can also adjust CSM in the PICTURE menu.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Data 1: OSD on
Data 0: Cool 1: Normal 2: Warm 3: User
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
12. Remote Control Lock Mode (Command2:m)
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
17. Red Adjustment (Command2:v)
To lock the remote control and the front panel
To adjust red in colour temperature.
controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 3C(or 50)
Data 0: Lock off
Refer to ‘Real data mapping 2’. See page 74
Data 1: Lock on
Acknowledgement [m][ ][Set ID][ ][OK][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power
is on/off, remote control lock is released.
13. PIP / DW (Command2:n)
1 8 . Green Adjustment (Command2:w)
To adjust red in colour temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 3C(or 50)
To control the PIP (Picture In picture)/DW.
You can also control the PIP/DW using the PIP button on the remote control or in the PIP/DW menu.
Transmission [k][n][ ][Set ID][ ][Data][Cr]
Data 0:PIP/DW off
Data2: DW1
Data5: POP
Acknowledgement [v][ ][Set ID][ ][OK][Data][x]
Data 1: PIP
Data3: DW2
Acknowledgement [n][ ][Set ID][ ][OK][Data][x]
14. PIP Position (Command2:q)
Refer to ‘Real data mapping 2’. See page 74
Acknowledgement [w][ ][Set ID][ ][OK][Data][x]
1 9 . Blue Adjustment (Command2:$)
To adjust red in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 3C(or 50)
Refer to ‘Real data mapping 2’. See page 74
Acknowledgement [$][ ][Set ID][ ][OK][Data][x]
To select sub picture position for PIP.
You can also adjust the sub picture position using
APPENDIX
POSI-TION button on the remote control or in the
PIP/DW menu.
Transmission [k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen
Data 1: Left down on screen
Data 2: Left up on screen
Data 3: Right up on screen
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
73
APPENDIX
20. Abnormal State (Command2:z)
25 . Auto Configure (Command1:j, Command2:u)
To recognize an abnormal state.
To adjust picture position and minimize image
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
Data 1: No signal (Power on)
Data 2: Turn the TV off by remote control
Data 3: Turn the TV off by sleep time function
Data 4: Turn the TV off by RS-232C function
Data 5: 5V down
Data 6: AC down
Data 7: Turn the TV off by Fan Alarm function (option)
Data 8: Turn the TV off by Off time function
Data 9: Turn the TV off by Auto sleep function
Data a: Turn the TV off by AV board detect
* This function is “read only”.
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
26 . Channel Select Command (Command1m, Command2:a)
To select a programme for the main picture.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data 0: Min: 0 ~ Max: 63
Refer to ‘Real data mapping 1’. See page 74
Data 1: Don’t care
Data 2: 0 : Main
1 : Sub
21. ISM Method (Command1:j, Command2:p)
To control the ISM method. You can also adjust ISM
Method in SPECIAL menu.
This feature is not available for all models.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal Mode
Data2: Orbiter
Data 1: White Wash
Data3: Inversion
Acknowledgement [p][ ][Set ID][ ][OK][Data][x]
22. Low Power (Command1:j, Command2:q)
To reduce the power consumption of the monitor.
You can also adjust Low Power in SPECIAL menu.
This feature is not available for all models.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data 0: Off
Data 1: On
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
23. Orbiter Time Setting (Command1:j, Command2:r)
To adjust orbiter operation time term.
This feature is not available for all models.
Transmission [j][r][ ][Set ID][ ][Data][ ][Cr]
Data Min: 1 ~ Max: FE
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
APPENDIX
24 . Orbiter Pixel Setting (Command1:j, Command2:s)
To adjust pixel number in orbiter function.
This feature is not available for all models.
Transmission [j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 3
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [s][ ][Set ID][ ][OK][Data][x]
74
Acknowledgement [a][ ][Set ID][ ][OK][Data0][x]
* Real data mapping 1
0 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
FE : Step 254
FF : Step 255
* Real data mapping 2
0 : -40
1 : -39
2 : -38
28 : 0
4E : +38
4F : +39
50 : +40
2 7 . S e n d I R C o d e (Command1:m, Command2:c)
29. Input select (Command1:x, Command2:y)
To send IR remote key code.
To adjust input source for sub picture in PIP mode
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Transmission [x][y][ ][Set ID][ ][Data][Cr]
Data: Structure
Data: Key code - Refer to page 77
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
MSB
0
28. Input select (Command1:x, Command2:b)
(Main Picture Input)
To select input source for TV
0
0
0
External Input
0
0
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
0
1
RGB-DTV
0
1
1
0
RGB-PC
1
0
0
1
HDMI
Input Number
0
0
0
0
Input Number
Data
0
0
1
Analog
LSB
0
0
1
0
AV
0
0
1
0
0
Component
0
1
0
1
RGB-DTV
0
1
1
0
RGB-PC
1
0
0
1
HDMI
Data
0
0
0
Input Number
External Input
0
External Input
Data: Structure
0
0
External Input
Transmission [x][b][ ][Set ID][ ][Data][Cr]
MSB
LSB
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [y][ ][Set ID][ ][OK][Data][x]
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]
APPENDIX
75
APPENDIX
IR CODES
1. How to Connect
■
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
■
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
■
Configuration of frame
1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
■
Tf
Lead code
9 ms
4.5 ms
■
Repeat code
0.55 ms
9 ms
■
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
APPENDIX
1.12 ms
■
2.24 ms
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
76
REMOTE CONTROL IR CODES
(Hexa)
Code
Function
Note
Code
Function
0F
TV
R/C Button
72
RED
R/C Button
0B
INPUT
R/C Button
71
GREEN
R/C Button
08
POWER
R/C Button (Power On/Off)
63
YELLOW
R/C Button
C4
POWER ON
Discrete IR Code (Only Power On) 61
BLUE
R/C Button
C5
POWER OFF
Discrete IR Code (Only Power OFF) 02
VOL +
R/C Button
60
PIP
R/C Button
03
VOL -
R/C Button
0E
SLEEP
R/C Button
00
PR +
R/C Button
20
TEXT
R/C Button
01
PR -
R/C Button
0A
I/II
R/C Button
09
MUTE
R/C Button
43
MENU
R/C Button
53
LIST
R/C Button
79
ARC
R/C Button
10 ~ 19 Number Key 0 ~ 9 R/C Button
5B
EXIT
R/C Button
1E
FAVOURITE
R/C Button
07
F
R/C Button
1A
Q.VIEW
R/C Button
06
G
R/C Button
64
SIZE
R/C Button
40
D
R/C Button
62
PIP: POSITION,
R/C Button
41
E
R/C Button
Teletext: UPDATE
R/C Button
44
OK
R/C Button
70
INDEX
R/C Button
72
PIP PR-
R/C Button
26
TIME
R/C Button
71
PIP PR+
R/C Button
2A
REVEAL
R/C Button
63
SWAP
R/C Button
E0
+
R/C Button
61
PIP INPUT
R/C Button
E1
-
R/C Button
(Hexa)
Note
APPENDIX
77
APPENDIX
PROGRAMMING THE REMOTE
The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
APPENDIX
78
1
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on the
component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the
remote control, while pointing at the component. Test the P O W E R and PR +/- buttons to see if the component responds properly. If not, the remote requires programming to operate the device.
2
Turn on the component to be programmed, then press the corresponding mode button (such as a D V D or
V C R) on the remote control. The remote control button of desired device is lighted.
3
Press the M E N U and M U T E buttons simultaneously, the remote control is ready to be programmed for the
code.
4
Enter a code number using the N U M B E R buttons on the remote control. Programming code numbers for
the corresponding component can be found on the following pages. Again, if the code is correct, the device
will turn off.
5
Press the M E N U button to store the code.
6
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
PROGRAMMING CODE
VCRs
Brand
AIWA
AKAI
Codes
Codes
Brand
MAGNAVOX
031
067
012
069
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
SAMSUNG
043 046 124
146
MARANTZ
033
023
037
031
103
039 043
129
033
MARTA
MATSUI
MEI
MEMOREX
040
033
007
108
116
135
041
010 064
110 111
117 119
MGA
MINOLTA
MITSUBISHI
023 039 043
053
017
031
037
131
008
025
034
046
138
009
033
109
136
012
018
063
033
033
013
066
063 072
144 147
031
050
150
034
048
012
106
027
035
101
153
010
045
026 034
137 150
015 033
101
033 043
055 060
152
039 043
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
REALISTIC
013 020
114 123
009 013 014
034 101 106
RICO
RUNCO
SALORA
013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014
033 034 041
068
031 033 067
030
033
010
034
102
046
020
020
051
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
Codes
032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
APPENDIX
034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040
Brand
101
79
APPENDIX
PROGRAMMING CODE
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
APPENDIX
80
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
017
009
026
006
006
015
006
008
018
016 025
TROUBLESHOOTING CHECKLIST
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction.
■ Are batteries installed with correct polarity (+ to +, - to -)?
■ Correct remote operating mode set: TV, VCR etc.?
■ Install new batteries.
■
The remote control
doesn’t work
Is the sleep timer set?
Check the power control settings. Power interrupted
■ No broadcast on station tuned with Auto off activated.
■
Power is suddenly
turned off
■
The video function does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &
No sound
P i c t u r e a p p e a r s s l o wly after switching on
■
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
No or poor color
or poor picture
Horizontal/vertical
bars or picture shaking
■
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
■
Check antenna (Change the direction of the antenna).
APPENDIX
Lines or streaks in
pictures
■
81
APPENDIX
TROUBLESHOOTING CHECKLIST
The audio function does not work.
Press the V O L + / - button.
Sound muted? Press M U T E button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK &
No sound
No output from one
of the speakers
■
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
Unusual sound from
inside the product
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range.
Vertical bar or
s t r i p e o n b a c kground & Horizontal
Noise & Incorrect
position
Screen colour is
unstable or single
colour
APPENDIX
82
■
Adjust resolution, horizontal frequency, or vertical frequency.
■
Check the input source.
■
Work the Auto configure or adjust clock, phase, or H/V position.
Check the signal cable.
■ Reinstall the PC video card.
■
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will
have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
■
■
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
APPENDIX
83
APPENDIX
PRODUCT SPECIFICATIONS
32LC2R*
37LC2R*
42LC2R*
32LC2R-TH
37LC2R-TH
42LC2R-TH
MODELS
with stand
Dimensions
(Width x Height x Depth)
without stand
including stand
excluding stand
Weight
811 x 630 x 235 mm
944 x 729 x 286 mm
1054 x 813 x286 mm
31.9 x 24.8 x 9.2inches
37.1 x 28.7 x 11.2 inches
41.4 x 32x 11.2 inches
811 x 566.8x 123.5 mm
944 x 659.3 x 129.7 mm
1054 x 746 x 136.8mm
31.9 x 22.3 x 4.8 inches
37.1 x 26 x 5.1 inches
41.4 x 29.3 x 5.3 inches
26.3 kg/57.9 lbs
35.5 kg/78.2 lbs
22.9 kg/50.4 lbs
30.9 kg /68.1 lbs
42.3kg/93.2 lbs
35.7kg/78.7 lbs
Power requirement
Television System
External Antenna Impedance
AC100-240V~ 50/60Hz
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
75 ohm
Operating Temperature
Operating Humidity
Environment condition
0 ~ 40°C/32 ~ 104°F
Less than 80%
Storage Temperature
Storage Humidity
MODELS
with stand
Dimensions
(Width x Height x Depth)
without stand
Weight
including stand
excluding stand
Power requirement
Television System
External Antenna Impedance
APPENDIX
Environment condition
84
42PC1R*
50PC1R*
50PC3R*
42PC1R-TH
42PC1RX-TH
50PC1R-TH
50PC1RX-TH
50PC3R-TH
50PC3RX-TH
1129.0 x 748.5 x 380.0 mm
1302.6 x 872 x 355.8 mm
1302.6 x 872 x 355.8 mm
44.4 x 29.4 x 14.9 inches
51.2 x 34.3 x 14 inches
51.2 x 34.3 x 14 inches
1129.0 x 695.0 x 103.7 mm
1302.6 x 810x 108.7 mm
1302.6 x 810x 107.7 mm
44.4 x 27.3 x 4 inches
51.2 x 31.8 x 4.2 inches
51.2 x 31.8 x 4.2 inches
29.3 kg/64.6 lbs
51.4 kg / 113.3 lbs
51.9 kg/133.1 lbs
25.4 kg/56.0 lbs
44.3 kg / 97.7 lbs
44.7 kg / 98.7 lbs
AC100-240V~ 50/60Hz
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
75 ohm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
■
-20 ~ 60°C/-4 ~ 140°F
Less than 85%
0 ~ 40°C/32 ~ 104°F
Less than 80%
-20 ~ 60°C/-4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
32LB1R*
37LB1R*
42LB1R*
32LB1R-TH
37LB1R-TH
42LB1R-TH
MODELS
with stand
Dimensions
(Width x Height x Depth)
without stand
including stand
excluding stand
Weight
Power requirement
Television System
External Antenna Impedance
911.4 x 599 x 259 mm
1045.8x 693.8x 260.4 mm
1175 x 768x300 mm
35.8 x 23.5 x 10 inches
41.1 x 27.2 x 10.2 inches
46.2 x 30.2 x 11.8 inches
911.4 x 511.5x 124.2mm
1045.8x 594.4x 133mm
1175 x 670x 143.8mm
35.8 x 20.1 x 4.8 inches
41.1 x 23.4 x 5.2 inches
46.2 x 26.3 x 5.6 inches
22.6 kg/49.8 lbs
31.6kg/69.6 lbs
41.4kg/91.2 lbs
17.8 kg/39.2 lbs
25.3 kg/55.7 lbs
33.9kg/74.7 lbs
AC100-240V~ 50/60Hz
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
75 ohm
0 ~ 40°C/32 ~ 104°F
Less than 80%
Operating Temperature
Operating Humidity
Environment condition
-20 ~ 60°C/-4 ~ 140°F
Less than 85%
Storage Temperature
Storage Humidity
32LC2R*
37LC2R*
42LC2R*
32LC2RW-TH
37LC2RW-TH
42LC2RW-TH
MODELS
with stand
Dimensions
(Width x Height x Depth)
without stand
Weight
including stand
excluding stand
Power requirement
Television System
External Antenna Impedance
1054 x 746 x 136.8mm
37.1 x 26 x 5.1 inches
41.4 x 29.3 x 5.3 inches
22.9 kg/50.4 lbs
30.9 kg /68.1 lbs
35.7kg/78.7 lbs
AC100-240V~ 50/60Hz
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
75 ohm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
■
944 x 659.3 x 129.7 mm
0 ~ 40°C/32 ~ 104°F
Less than 80%
-20 ~ 60°C/-4 ~ 140°F
Less than 85%
APPENDIX
Environment condition
811 x 566.8x 123.5 mm
31.9 x 22.3 x 4.8 inches
The specifications shown above may be changed without prior notice for quality improvement.
85
Download PDF

advertising