LG | 50PB2RR | LG 42PC1RR Owner’s Manual

LCD TV PLASMA TV
OWNER’s MANUAL
LCD TV MODELS
3 7 L C 2 R R*
4 2 L C 2 R R*
PLASMA TV MODELS
4 2 P C 1 R R*
5 0 P B 2 R R*
P l e a s e r e a d I n f o r m a t i o n Ma n u a l i n c l u d e d
t o g e t h e r b e f o r e r e a d i n g t h i s m a n u a l a n d o p e rating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require service.
Model number
Serial number
:
:
P/NO: MFL32196504 (0611-REV04)
ACCESSORIES
Ensure that the following accessories are included with your set. If an accessory is missing, please contact the
dealer where you purchased the set.
INPUT
POWER
DVD
TV
MULTIMEDIA
VCR
MODE
CABLE
STB
AUDIO
MARK
LIVE
TIME MACHINE
MENU
TV
EXIT
TIME
SHIFT
Owner's Manual
PIP PR
-
PIP PR +
SWAP
VOL
PIP INPUT
PR
MUTE
TEXT
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
LIST
Q.VIEW
?
PIP
Owner’s Manual
Batteries
Remote Control
Power Cord
Polishing Cloth
Polish the screen with the cloth
(Option)
Do not wipe roughly when
removing stain. Please be cautious of that excessive power may
cause scratch or discoloration.
ACCESSORIES
Slightly wipe stained spot on the
exterior only with the cleansing
cloths for the product exterior if
there is stain or fingerprint on
surface of the exterior.
OK
TIME
SHIFT
F o r 4 2 P C 1 R R*
2-eye-bolts
2-Wall brackets
2-bolts for stand assembly
(Refer p.11)
This feature is not available
for all models.
F o r 3 7 L C 2 R R* , 4 2 L C 2 R R*
2-TV brackets
2-Wall brackets
Twister Holder
Arrange the wires
with the twister holder.
Cable
Management
2-bolts
F o r 5 0 P B 2 R R*
2-Wall brackets
2-eye-bolts
1
CONTENTS
Accessories
............................................
1
SPECIAL FUNCTIONS
INTRODUCTION
Controls / Connection Options . . . . . . . . . . . . . . . . . . 4-8
CONTENTS
Remote Control Key Functions
Home Menu
...................
9-10
..........................................
11
INSTALLATION
Unfolding The Base Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
How to join the set assembly to the wall to protect the
set tumbling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stand installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CONNECTIONS & SETUP
Antenna Connection
VCR Setup
External Equipment Connections
DVD Setup
STB(SET-TOP BOX) Setup
PC Setup
17
18-19
...................
.......................................
TimeShift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Progressing the Timeshift function . . . . . . . . . . . . . .30-31
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33
Watching & Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Recorded TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Recorded program Selection and Popup Menu .35-36
Playing recorded programs . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Manual Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Scheduled List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Video Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Format hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
PIP/POP/Twin Picture
.................................
........................................
DVR (Digital Video Recorder)
20
21-22
......................
23-24
.........................................
25-27
BASIC OPERATION
Turning the set on . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 28
Programme Selection . . . . . . . . . . . . . . . . . . . . . . . . 28
On-Screen Menu Language Selection (option) . . . 28
PIP (Picture-In-Picture) Feature . . . . . . . . . . . . . . . . 41
Watching PIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Adjusting PIP Transparency (PIP mode only) . . . . . 41
Programme Selection for Sub Picture . . . . . . . . . . . 42
Adjusting the screen for the PIP . . . . . . . . . . . . . . . 42
Selecting an Input Signal Source for the PIP . . . . . 42
Sub Picture Size Adjustment (PIP mode only) . . . . 42
Moving the PIP (PIP mode only) . . . . . . . . . . . . . . . 42
Swapping between main and sub pictures . . . . . . . 43
POP (Picture-out-of-Picture: Channel Scan) . . . . . 43
TELETEXT
Teletext Language Selection (option) . . . . . . . . . . . . . . . 44
Switch on/off
........................................
SIMPLE Text (option)
................................
45
...................................
45
.............................................
45
TOP Text (option)
FASTEXT
Special Teletext Functions
2
44
...........................
46
TV MENU
On Screen Menus Selection and Adjustment . . . . . . . 47
Child Lock
Fine tuning
48
..........................
49
...........................................
50
Assigning a station name
............................
......................................
Favourite programme
72
............................................
73
................................
Calling the programme table
........................
XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Index (option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
51
Booster (option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Programme edit
Low Power
71
........
ISM Method (Image Sticking Minimization)
.............................
Manual programme Tuning
............................................
CONTENTS
Setting up TV stations
Auto programme Tuning
Special Menu Options
Screen Menu Options
53
Auto Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
54
Manual Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
55
Selecting Wide XGA/VGA mode . . . . . . . . . . . . . . . 77
Setting Picture Format . . . . . . . . . . . . . . . . . . . . . . . 78
Picture Menu Options
Cinema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
PSM (Picture Status Memory)
......................
56
CSM (Colour Status Memory)
......................
57
NR (Noise Reduction) . . . . . . . . . . . . . . . . . . . . . . . 80
Initializing (Reset to original factory settings) . . . . 80
Manual Colour Temperature Control (CSM - User option) . . . . . . 58
XD Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
sRGB Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
APPENDIX
ACM (Active Colour Management) . . . . . . . . . . . . . 61
Manual Picture Control . . . . . . . . . . . . . . . . . . . . . . 62
External Control Device Setup . . . . . . . . . . . . . .81-87
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-89
Programming the Remote . . . . . . . . . . . . . . . . . . . . 90
Sound Menu Options
.......................
63
Programming Codes . . . . . . . . . . . . . . . . . . . . . 91-94
..........................
64
Troubleshooting Checklist . . . . . . . . . . . . . . . . . 95-96
............................
65
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
TV Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Product Specifications . . . . . . . . . . . . . . . . . . . 98-99
SSM (Sound Status Memory)
AVL (Auto Volume Leveler)
Adjusting Sound Control
Stereo/Dual Reception
..............................
NICAM Reception (option)
Sound Output Selection
66
.........................
67
............................
67
Time Menu Options
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Setting the On/Off Time . . . . . . . . . . . . . . . . . . . . . 69
Auto Sleep
...........................................
70
Sleep Timer
..........................................
70
3
INTRODUCTION
CONTROLS
This manual explains the features available on the 42PC1RR* set.
A This is a simplified representation of a front panel. Here shown may be somewhat different from your set.
INTRODUCTION
Front Panel Controls
INPUT
MENU
PR
VOL
OK
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
• illuminates orange when manual
recording in stanby mode.
INPUT
INPUT
MENU
OK
MENU
OK
PR
VOL
INPUT Button
OK Button
PROGRAMME Buttons
POWER Button
MENU Button
4
VOLUME Buttons
VOL
CONNECTION OPTION
This is the back panel of 42PC1RR* sets.
Back Connection Panel
S-VIDEO
R
AUDIO
L/MONO
VIDEO
S-VIDEO Input
Connect S-Video out from an S-VIDEO
device.
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
4
INTRODUCTION
AV IN 2
AC IN
1
3
2
5
6
7
VARIABLE
AUDIO OUT
RGB IN
HDMI/
DVI IN
AV OUT
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
2
RS-232C IN
ANTENNA
IN
1
(CONTROL
& SERVICE)
REMOTE
CONTROL IN
(MONO)
VIDEO
AUDIO
S-VIDEO
AV IN 1
COMPONENT IN
8
9
1
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI.
2
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
3
4
5
AUDIO
VIDEO
10
11
6
AV Output
Connect second TV or monitor to the AV OUT
socket on the set.
7
Antenna Input
8
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices to
the RS-232C jack.
9
Remote Control Port
10
S-Video Input
Connect S-Video out from an S-VIDEO device.
11
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Power Cord Socket
This set operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the set on DC power.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
5
INTRODUCTION
CONTROLS
This is the front panel of models 3 7 L C 2 R R*, 4 2 L C 2 R R*, 5 0 P B 2 R R * sets.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your set.
INTRODUCTION
<Front Panel 3 7 L C 2 R R*, 4 2 L C 2 R R*>
PR
PROGRAMME Buttons
VOL
VOLUME Buttons
OK
OK Button
MENU
MENU Button
INPUT
INPUT Button
R
POWER Button
/I
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
• illuminates orange when manual recording in
stanby mode.
<Side Panel >
<Front Panel 5 0 P B 2 R R* >
PR
PROGRAMME
(D,E)Button
VOL
VOLUME (F,G)
Button
PR
VOL
OK Button
OK
OK
MENU
MENU Button
MENU
INPUT
INPUT Button
INPUT
Remote Control Sensor
6
(POWER) Button
CONNECTION OPTION
This is the back panel of models 3 7 L C 2 R R*, 4 2 L C 2 R R* sets.
Back Connection Panel
R
S-VIDEO
L/MONO
MONO
AUDIO
VIDEO
AV IN 2
AC IN
VIDEO Input
Connects the video signal from a video
device.
4
2
1
AUDIO Input
Connections are available for listening
stereo sound from an external device.
3
5
INTRODUCTION
S-VIDEO Input
Connect S-Video out from an S-VIDEO
device.
7
6
VARIABLE
AUDIO OUT
RGB IN
HDMI/
DVI IN
AV OUT
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
2
RS-232C IN
ANTENNA
IN
1
(CONTROL
& SERVICE)
REMOTE
CONTROL IN
8
9
(MONO)
VIDEO
AUDIO
S-VIDEO
AV IN 1
COMPONENT IN
1
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI.
2
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
3
4
5
AUDIO
VIDEO
10
11
6
AV Output
Connect second TV or monitor to the AV OUT
socket on the set.
7
Antenna Input
8
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices to
the RS-232C jack.
9
Remote Control Port
10
S-Video Input
Connect S-Video out from an S-VIDEO device.
11
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Power Cord Socket
This set operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the set on DC power.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
7
INTRODUCTION
CONNECTION OPTION
This is the back panel of 50PB2RR* sets.
Back Connection Panel
INTRODUCTION
VIDEO
L/MONO
AUDIO R S-VIDEO
AV IN 2
S-VIDEO Input
Connect S-Video out from an S-VIDEO
device.
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
4
AC IN
1
3
2
5
6
7
VARIABLE
AUDIO OUT
RGB IN
HDMI/
DVI IN
AV OUT
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
2
RS-232C IN
ANTENNA
IN
1
(CONTROL
& SERVICE)
REMOTE
CONTROL IN
(MONO)
VIDEO
AUDIO
S-VIDEO
AV IN 1
COMPONENT IN
8
1
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI.
2
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
3
4
5
8
9
AUDIO
VIDEO
10
11
6
AV Output
Connect second TV or monitor to the AV OUT
socket on the set.
7
Antenna Input
8
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices to
the RS-232C jack.
9
Remote Control Port
10
S-Video Input
Connect S-Video out from an S-VIDEO device.
11
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Power Cord Socket
This set operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the set on DC power.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the set.
There maybe a defect in consecutive operation of remote control in a specified brightness according to this set.
POWER switches the set on from standby or off to standby.
INPUT Selects the TV, AV, Component, RGB or HDMI/DVI modes.
switches the set on from standby.
POWER
DVD
TV
MULTIMEDIA
VCR
MODE
CABLE
STB
AUDIO
switches the set on from standby.
MODE Selects another device.
MARK
VCR BUTTONS Controls a video cassette recorder.
These buttons are used for TIME MACHINE.
For further details, see the ‘TIME MACHINE’ section.
M
ENU
TIME MACHINE
MARK Selects the wanted functions.
LIVE TV In TV, AV1, AV2, Component modes, screen returns to the
live programme. (Refer to p.37)
LIVE
TV
EXIT
INTRODUCTION
MULTIMEDIA Selects the Component, RGB or HDMI/DVI modes.
INPUT
OK
TIME
SHIFT
TIME
SHIFT
TIME MACHINE Brings up the Home menu.
PIP P
MENU Displays on screen menus one by one.
Exits the current menu.
Memorizes menu changes.
R-
PUT
PIP PR +
SWAP
VOL
PR
MUTE
EXIT Clears all on-screen displays and returns to TV viewing
PIP IN
TEXT
from any menu.
VOL D / E Increases/decreases sound level.
(Volume Up/Down)
PR D / E Select a programme.
(Programme Switchs the set on from standby.
Up/Down)
MUTE Switches the sound on or off.
TEXT These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
Note : In teletext mode, the PIP PR +/-, SWAP and PIP
INPUT buttons are used for teletext function.
LIST
Q.VIEW
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
?
PIP
ARC Changes the picture format.
I/II Selects the language during dual language broadcast.
Selects the sound output.
9
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
LIVE
OK accepts your selection or displays the
U
MEN
current mode.
TIME MACHINE
or F / G Adjusts menu settings.
(TIME SHIFT) Selects menu item.
D
/
TV
EXIT
E
INTRODUCTION
OK
TIME
SHIFT
TIME
SHIFT
PIP Switches the sub picture on or off.
Selects PIP , POP or DW modes.
PIP P
PIP PR +/- Selects a programme for the sub picture.
R-
PUT
PIP PR +
PIP IN
SWAP
SWAP Alternates between main and sub picture.
VOL
PIP INPUT Selects the input mode for the sub picture.
PR
MUTE
TEXT
SIZE Adjusts the sub picture size.
POSITION Moves the sub picture to D / E or F / G direction.
NUMBER buttons Selects a programme.
Selects numbered items in a menu.
Switchs the set on from standby.
LIST
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
Q.VIEW
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
?
PIP
SLEEP Sets the sleep timer.
FAV Selects a favourite programme.
Installing Batteries
1
Open the battery compartment cover on the back side.
2
Insert two batteries in correct
polarity (+ with +, - with -).
Don’t mix old or used batteries
with new ones.
3
10
Remote control effective range
MULTIMEDIA
INPUT
POWER
MULTIMEDIA
INPUT
DVD
TV
VCR
POWER
MODE
CABLE
AUDIO
STB
DVD
TV
VCR
MODE
CABLE
AUDIO
STB
MARK
LIVE
TV
EXIT
MENU
MARK
LIVE
TV
EXIT
MENU
OK
TIME
SHIFT
TIME
SHIFT
OK
PIP PR
-
PIP PR +
SWAP
PIP INPUT
PIP PR
VOL
TIME
SHIFT
TIME
SHIFT
MUTE
TEXT
PR
VOL
-
PIP PR +
MUTE
SWAP
TEXT
PIP INPUT
PR
■
Use a remote control 7 meter distance and 30
degree (left/right) within the receiving unit scope.
■
Dispose of used batteries in a recyclebin to preserve environment.
Close the cover.
INTRODUCTION
HOME MENU
This menu is a contents guide.
In Home Menu, you enter the Recorded list of DVR, Manual Rec, Scheduled List or
TV Menu.
INTRODUCTION
TIME MACHINE
INPUT
POWER
DVD
TV
MODE
CABLE
AUDIO
Home
MULTIMEDIA
VCR
STB
Free Space
MARK
U
MEN
TIME MACHINE
LIVE
TV
EXIT
High
3h 19m
Normal
5h 24m
Recorded TV
DVR
p.29
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R
-
PIP PR +
SWAP
VOL
PIP IN
PUT
PR
MUTE
TEXT
Manual Rec.
Scheduled List
TV Menu
TV Menu
p.47
11
INSTALLATION
UNFOLDING THE BASE STAND (42PC1RR*)
■
This feature is not available for all models.
INSTALLATION
1
A
3
2
4
B
C
■
Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1.
Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
■
Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.
■
When connecting cables to the set, Do not disengage the lock (C).
This may cause the set to fall, causing serious bodily injury and serious damage to the set.
! NOTE
Figures shown here may be slightly different from your set.
When closing the stand for storage
First remove the screws in the holes (B) on the bottom
of the stand. And then pull two Hooks (D) of the stand bottom
and fold the stand into the back of the set.
After folding, push two Locks (A) of the stand bottom outward.
12
D
A
B
BASIC CONNECTION (42PC1RR *, 50PB2RR *)
■
These models have two cable arrangement methods according to the stand type.
Stand type 1
INSTALLATION
Arrange the cables as shown picture.
Stand type 2
1
Hold the C A B L E M A N A G E M E N T with both
hands and push it as shown.
CABLE MANAGEMENT
2
Connect the cables as necessary.
To connect an additional equipment, see the
E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
3
Reinstall the C A B L E M A N A G E M E N T as
shown.
13
INSTALLATION
BASIC CONNECTION (37LC2RR*, 42LC2RR*)
1
Connect the cables as necessary.
After connecting the cables neatly, arrange
the cables to the Cable Holder.
To connect an additional equipment, see the
CONNECTIONS & SETUP section.
INSTALLATION
2
Install the C A B L E M A N A G E M E N T
as shown.
3
Bundle the cables using the supplied
twister holder.
HOW TO REMOVE THE CABLE MANAGEMENT
Hold the C A B L E M A N A G E M E N T with both
hands and pull it upward.
! NOTE
G
Do not hold the C A B L E M A N A G E M E N T when moving the product.
If the product is dropped, you may be injured or the product may be broken.
SWIVEL STAND (42LC2RR *, 50PB2RR * only)
- This feature is not available for all models.
- The set can be conveniently swivelled on its stand about 20°~30° to the left or right to provide the optimum
viewing angle.
14
HOW TO JOIN THE SET ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING
■
■
1
1
2
or
INSTALLATION
Set it up close to the wall so the set doesn’t fall over when it is pushed backwards.
The instructions shown below is a safer way to set up the set, which is to fix it on the wall so the set doesn’t fall over when it is pulled in the forward direction. It will prevent the set from falling for-ward and hurting people. It will also prevent the set from damage caused by fall. Please make sure that children don’t
climb on or hang from the set.
2
1
Use the eye-bolts or set brackets/bolts to fix the set to the wall as shown in the picture.
(If your set has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or set brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts (not provided as parts of the set, must purchase separately) on the
wall. Match the height of the bracket that is mounted on the wall.
3
33
Use a sturdy rope (not provided as parts of the set, must purchase separately) to tie the set. It is safer to tie
the rope so it becomes horizontal between the wall and the set.
! NOTE
G
G
G
When moving the set to another place undo the ropes first.
Use a set holder or a cabinet that is big and strong enough for the size and weight of the set.
To use the set safely make sure that the height of the bracket that is mounted on the wall is same as that
of the set.
15
INSTALLATION
STAND INSTALLATION
■
■
The set can be installed in various ways such as on a wall, or on a desktop etc.
The set is designed to be mounted horizontally.
GROUNDING
INSTALLATION
Power
Supply
Ensure that you connect the earth ground wire to prevent
possible electric shock. If grounding methods are not possible,
have a qualified electrician install a separate circuit breaker. Do
not try to ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Desktop Pedestal Installation
For proper ventilation, allow a clearance of 4" on each side and from the wall.
4 inches
4 inches
4 inches
INPUT
MENU
OK
VOL
4 inches
PR
Wall Mount: Horizontal installation
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
4 inches
4 inches
4 inches
4 inches
4 inches
< O n l y 4 2 P C 1 R R* >
Remove two screws of the backside of the set before
installing the wall mounting bracket.
16
CONNECTIONS & SETUP
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■ This part of CONNECTION & SETUP mainly use pictures for the 42PC1RR*, 50PB2RR*.
■
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
■
Wall Antenna Socket
ANTENNA
IN
ANTENNA
IN
RF Coaxial Wire (75 ohm)
VHF Antenna
Turn clockwise to tighten.
UHF Antenna
ANTENNA
IN
CONNECTIONS & SETUP
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Outdoor Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
In poor signal areas, to get better picture quality,
install a signal amplifier to the antenna as shown
to the right.
■ If signal needs to be split for two TVs, use an
antenna signal splitter for connection.
■
UHF
VHF
ANTENNA
IN
Signal
Amplifier
ANTENNA
IN
17
CONNECTIONS & SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of
the screen may remain visible on the screen.
■
When connecting with an antenna
CONNECTIONS & SETUP
2
1
Connect the A N T O U T of the VCR to the
A N T E N N A I N socket on the set.
2
Connect the antenna cable to the A N T I N
antenna socket of the VCR.
3
Press the P L A Y button on the VCR and match
the appropriate programme between the TV
and VCR for viewing.
VCR
ANT IN
IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
3
OUT
4
(R) AUDIO (L) VIDEO
VARIABLE
AUDIO OUT
AV OUT
ANTENNA
IN
ANTENNA
IN
1
(MONO)
S-VIDEO
VIDEO
AUDIO
AV IN 1
(
S-VIDEO
S-VIDEO
When connecting with a RCA cable
ANT IN
VCR
IN
OUTPUT
SWITCH
3
)
(
)
AUDIO
AUDIO
1
V I D E O jacks between
Connect the A U D I O/V
TV and VCR. Match the jack colors (Video =
yellow, Audio Left = white, and Audio Right =
red)
2
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
3
Select A V 1 input source using the I N P U T
button on the remote control.
- If connected to A V I N 2, select A V 2 input
source.
OUT
4
VIDEO
AV IN 1
S-VIDEO
ANT OUT
VIDEO
AV IN 1
(R) AUDIO (L) VIDEO
1
VARIABLE
AUDIO OUT
AV OUT
(
S-VIDEO
VIDEO
AV IN 1
(MONO)
S-VIDEO
VIDEO
AV IN 1
AUDIO
)
AUDIO
ANTENNA
IN
! NOTE
G
18
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack
of the set.
AV IN 4
R
AUDIO
L/MONO
VCR SETUP
VIDEO
When connecting with an S-Video cable
ANT IN
VCR
IN
Connect the S-VIDEO output of the VCR to
the S - V I D E O input on the set. The picture
quality is improved; compared to normal composite (RCA cable) input.
ANT OUT
OUTPUT
SWITCH
3
2
Connect the audio outputs of the VCR to the
A U D I O input jacks on the set.
3
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
4
Select A V 1 input source with using the
I N P U T button on the remote control.
OUT
4
(R) AUDIO (L) VIDEO
2
1
VARIABLE
AUDIO OUT
AV OUT
ANTENNA
IN
(MONO)
S-VIDEO
VIDEO
AUDIO
AV IN 1
! NOTE
G
If both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy.
only the S-Video can be received.
S-VIDEO
VIDEO
(
CONNECTIONS & SETUP
1
S-VIDEO
)
AUDIO
AV IN 1
19
CONNECTIONS & SETUP
EXTERNAL EQUIPMENT CONNECTIONS
AV IN 2
1
V I D E O jacks between
Connect the A U D I O/V
TV and external equipment. Match the jack
colors (Video = yellow, Audio Left = white, and
Audio Right = red).
2
Select A V 2 input source with using the
I N P U T button on the remote control.
- If connected to A V I N 1 input, select A V 1
input source.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
S-VIDEO
R
AUDIO
L/MONO
CONNECTIONS & SETUP
VIDEO
1
Camcorder
Video Game Set
R
AUDIO
L
VIDEO
EXTERNAL STEREO
■
Use to connected either an external amplifier, or add a sub-woofer to your surround sound system.
TV Back panel
VARIABLE
AV OUT
AUDIO OUT
(MONO)
S-VIDEO
VIDEO
AV IN 1
1
Analog Stereo Amplifier
20
AUDIO
1
Connect the input jack of the stereo’s amplifier to
the V A R I A B L E A U D I O O U T jacks on the set.
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided
with the amplifier.
• When connecting with external audio equipments, such as amplifiers or speakers, please
turn the TV speakers off.
VIDEO
2
DVD SETUP
2
1
1
VIDEO
AUDIO
COMPONENT IN AUDIO
VIDEO
COMPONENT IN
When connecting with a S-Video cable
(R) AUDIO (L)
DVD
1
Connect the S-VIDEO output of the DVD to the
S - V I D E O input on the set.
2
Connect the audio outputs of the DVD to the
A U D I O input jacks on the set.
3
Turn on the DVD player, insert a DVD.
4
Select A V 1 input source with using the I N P U T
button on the remote control.
5
Refer to the DVD player's manual for operating
instructions.
S-VIDEO
2
1
AV OUT
ANTENNA
IN
(MONO)
S-VIDEO
S-VIDEO
VIDEO ( AUDIO
)
1 AUDIO
VIDEO
AV
V IN
AV IN 1
CONNECTIONS & SETUP
VARIABLE
AUDIO OUT
RGB IN
RGB IN RGB
When connecting with a HDMI cable
1
Connect the HDMI output of the DVD to the
H D M I / D V I I N jack on the set.
2
Select H D M I / D V I input source with using the
I N P U T button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
RGB IN
HDMI/
DVI IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
RS-232C IN
(CONTROL
& SERVICE)
1
REMOTE
CONTROL IN
DVD
HDMI OUTPUT
! NOTE
G
G
G
Set can receive the video and audio signal simultaneously with using a HDMI cable.
If the DVD supports Auto HDMI function, the DVD output resolution will be automatically set
to 1280x720p.
If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the DVD to 1280x720p.
21
(PC/DTV)
RGB
(PC/DTV)
CONNECTIONS & SETUP
DVD SETUP
When connecting with a component cable
DVD
B
R
1
CONNECTIONS & SETUP
1
Connect the video outputs (Y, PB, PR) of the
DVD to the C O M P O N E N T I N V I D E O jacks
on the set.
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the set.
3
Turn on the DVD player, insert a DVD.
4
Select Component1 or Component2 input
source with using the I N P U T button on the
remote control.
5
Refer to the DVD player's manual for operating
instructions.
(R) AUDIO (L)
2
2
1
VIDEO
AUDIO
COMPONENT IN
! NOTE
G
RGB IN
RGB
(PC/DTV)
22
Component Input ports
To get better picture quality, connect a DVD
player to the component input ports as
shown below.
Component ports on the SET
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
AV IN 4
2
R
AUDIO
L/MONO
1
AUDIO
VIDEO
VIDEO
COMPONENT IN
STB(SET-TOP BOX) SETUP
■
This set can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if
you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure
as shown below.
2
1
VIDEO
AUDIO
COMPONENT IN
When connecting with a D-sub 15 pin cable
RGB-DTV OUTPUT
Digital
Set-top
Box
2
Connect the RGB output of the digital set-top
box to the R G B I N ( P C / D T V ) jack on the set.
2
Connect the audio outputs of the set-top box
to the A U D I O ( R G B / D V I ) jack on the set.
3
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
4
Select R G B input source with using the
I N P U T button on the remote control.
1
RGB IN
(
)
AUDIO
VIDEO RGB
(PC/DTV)
(RGB/DVI)
AV IN 1
S-VIDEO
AUDIO
CONNECTIONS & SETUP
(R) AUDIO (L)
1
REMOTE
CONTROL IN
RGB IN
RGB
(PC/DTV
When connecting with a HDMI cable
1
Connect the HDMI output of the digital settop box to the H D M I / D V I I N jack on the set.
2
Select H D M I / D V I input source with using the
I N P U T button on the remote control.
3
Turn on the digital set-top box. (Refer to the
owner’s manual for the digital set-top box.)
RGB IN
HDMI/
DVI IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
RS-232C IN
(CONTROL
& SERVICE)
REMOTE
CONTROL IN
1
Digital Set-top Box
HDMI OUTPUT
! NOTE
G
G
G
Set can receive the video and audio signal simultaneously with using a HDMI cable.
If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top
box will be automatically set to 1280x720p.
If the digital set-top box does not support Auto HDMI, you need to set the output resolution
appropriately. To get the best picture quality, adjust the output resolution of the digital set-top
box to 1280x720p.
23
CONNECTIONS & SETUP
STB(SET-TOP BOX) SETUP
When connecting with a component cable
Digital Set-top Box
B
R
Connect the video outputs (Y, PB, PR) of the digital
set-top box to the C O M P O N E N T I N V I D E O jacks
on the set.
2
Connect the audio output of the digital set-top box
to the C O M P O N E N T I N A U D I O jacks on the set.
3
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
4
Select C o m p o n e n t 1 or C o m p o n e n t 2 input source
with using the I N P U T button on the remote control.
(R) AUDIO (L)
1
CONNECTIONS & SETUP
1
2
2
1
AUDIO
VIDEO
COMPONENT IN
2
1
! NOTE
VIDEO
AUDIO
COMPONENT IN
Signal
Component
RGB-DTV
HDMI-DTV
480i/576i
Yes
No
No
480p/576p/720p/1080i
Yes
Yes
Yes
When connecting with a HDMI to DVI cable
1
Connect the DVI output of the digital set-top box to
the H D M I / D V I I N jack on the set.
2
Connect the audio outputs of the set-top box to the
A U D I O ( R G B / D V I ) jack on the set.
3
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
4
Select H D M I / D V I input source with using the
I N P U T button on the remote control.
RGB IN
HDMI/
DVI IN
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
RS-232C IN
(CONTROL
& SERVICE)
1
REMOTE
CONTROL IN
2
RGB IN
RGB
(PC/DTV)
Digital Set-top
Box
RGB IN
RGB
(PC/DTV)
DVI OUTPUT
(R) AUDIO (L)
! NOTE
G
G
G
24
If the digital set-top box has a DVI output and no HDMI output, a separated audio connection
is necessary.
If the digital set-top box supports Auto DVI function, the output resolution of the digital settop box will be automatically set to 1280x720p.
If the digital set-top box does not support Auto DVI, you need to set the output resolution
appropriately. To get the best picture quality, adjust the output resolution of the digital settop box to 1280x720p.
2
1
AUDIO
VIDEO
COMPONENT IN
PC SETUP
■
This set provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings.
When connecting with a D-sub 15 pin cable
1
Connect the RGB output of the PC to the
R G B I N ( P C / D T V ) jack on the set.
2
Connect the audio outputs of the PC to the
A U D I O ( R G B / D V I ) jack on the set.
3
Turn on the PC and the set.
4
Select R G B input source with using the
I N P U T button on the remote control.
PC
(R) AUDIO (L)
RGB-DTV OUTPUT
RGB IN
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
2
1
REMOTE
CONTROL IN
AUDIO
VIDEO
COMPONENT IN
CONNECTIONS & SETUP
1
2
When connecting with a HDMI to DVI cable
1
Connect the DVI output of the PC to the
H D M I / D V I I N jack on the set.
2
Connect the audio outputs of the PC to the
A U D I O ( R G B / D V I ) jack on the set.
3
Turn on the PC and the set.
4
Select H D M I / D V I input source with using the
I N P U T button on the remote control.
RGB IN
HDMI/
DVI IN
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
RS-232C IN
(CONTROL
& SERVICE)
1
REMOTE
CONTROL IN
2
PC
DVI OUTPUT
RGB IN
RGB
(PC/DTV)
(R) AUDIO (L)
! NOTE
G
G
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
If the PC does not support Auto DVI, you need to set the output resolution appropriately. To
get the best picture quality, adjust the output resolution of PC graphics card's output resolution to 1024x768, 60Hz.
25
CONNECTIONS & SETUP
! NOTE
G To
CONNECTIONS & SETUP
26
enjoy vivid picture and sound, connect a PC to
the set.
G Avoid keeping a fixed image on the set’s screen for
a long period of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
G Connect PC to the RGB (PC/DTV) or HDMI/DVI
port of the set; change the resolution output of
PC accordingly.
G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC
mode. Change the PC mode into another resolution or change the refresh rate into another rate
or adjust the brightness and contrast on the
menu until the picture is clean. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult it to the
manufacturer of the PC graphic card.
synchronization input waveform for
G The
Horizontal and Vertical frequencies are separate.
G In 42PC1RR/50PB2RR models, we recommend
using 1024x768, 60Hz for the PC mode, they
provide the best picture quality.
G In 37LC2RR/42LC2RR models, we recommend
using 1360x768, 60Hz for the PC mode, they
provide the best picture quality.
G If the resolution of PC is over UXGA, there will be
no picture on the set.
G Connect the signal cable from the monitor output
port of the PC to the RGB (PC/DTV) port of the
set or the signal cable from the HDMI output port
of the PC to the HDMI/DVI port on the set.
G Connect
the audio cable from the PC to the
Audio input on the set. (Audio cables are not
included with the set).
G If using a sound card, adjust PC sound as required.
G This set uses a VESA Plug and Play Solution. The
set provides EDID data to the PC system with a
DDC protocol. The PC adjusts automatically when
using this set.
G DDC protocol is preset for RGB (Analog RGB),
HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play
functionally.
G If graphic card on the PC does not output analog
and digital RGB simultaneously, connect only one
of either RGB (PC/DTV) or HDMI/DVI to display
the PC on the set.
G If graphic card on the PC does output analog and
digital RGB simultaneously, set the set to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the set.)
G DOS mode may not work depending on video
card if you use a HDMI to DVI cable.
G When you use too long RGB-PC cable, there
might be a noise on the screen. We recommend
using under 5m of the cable. It provides the best
picture quality.
G In RGB, HDMI/DVI input sources, you can select the
PC or DTV mode when the below signals are input;
- PC : 640x480, 60Hz / 720x480, 60Hz / 848x480, 60Hz
/ 858x480, 60Hz / 1280x720, 60Hz
- DTV : 480p / 720p, 60Hz
Supported Display Resolution (RGB / HDMI mode)
(37LC2RR *, 42LC2RR *)
Supported Display Resolution (RGB / HDMI mode)
(42PC1RR *, 50PB2RR *)
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x400
31.468
70.8
640x350
31.468
37.861
70.09
85.08
640x480
31.469
37.684
59.94
75.00
720x400
31.469
37.927
70.08
85.03
800x600
37.879
46.875
60.31
75.00
832x624
49.725
74.55
640x480
48.363
56.47
60.123
60.00
70.00
75.029
59.94
66.66
72.80
75.00
85.00
1024x768
31.469
35.000
37.861
37.500
43.269
848x480
31.500
37.799
39.375
60.00
70.00
75.00
852x480
31.500
37.799
39.375
60.00
70.00
75.00
800x600
35.156
37.879
48.077
46.875
53.674
56.25
60.31
72.18
75.00
85.06
832x624
49.725
74.55
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
1360x768
47.700
60.00
1366x768
47.700
60.00
1152x864
54.348
60.05
1280x768
47.776
59.87
1280x768
47.776
59.870
1360x768
47.720
59.799
1366x768
47.720
59.799
CONNECTIONS & SETUP
Resolution
27
BASIC OPERATION
TURNING THE SET ON
If your set will be turned on, you will be able to use its features.
Turning the set on
1
POWER
INPUT
First, connect power cord correctly.
At this moment, the set switches to standby mode.
■ In standby mode to turn set on, press the
, I N P U T,
P R D / E button on the set or press the
P O W E R, I N P U T, M U L T I M E D I A, P R D / E, N U MB E R button on the remote control and then the set will
switch on.
DVD
TV
VCR
MODE
CABLE
STB
AUDIO
MARK
U
MEN
MULTIMEDIA
TIME MACHINE
LIVE
TV
EXIT
Volume Adjustment
BASIC OPERATION
1
Press the V O L D / E button to adjust the volume.
2
If you want to switch the sound off, press the M U T E button.
3
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R
You can cancel this function by pressing the M U T E ,
V O L D / E or I / I I button.
-
PUT
PIP PR +
SWAP
VOL
PIP IN
PR
MUTE
TEXT
Programme selection
1
Press the P R D / E or NUMBER button to select a programme number.
LIST
On-Screen Menu Language Selection (option)
Press the M E N U button and then use D / E button to select
the SPECIAL menu.
2
Press the G button and then use D / E button to select
L a n g u a g e.
3
Press the G button and then use D / E button to select
your desired language. From this point on, the on-screen
menus will be shown in the language of your choice.
4
Press the E X I T button to return to normal TV viewing.
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
?
- The menus can be shown on the screen in the selected language.
First select your language.
1
Q.VIEW
PIP
! NOTE
28
G If
you intend to be away on
vacation, disconnect the power
plug from wall power outlet.
SPECIAL FUNCTIONS DVR (Digital Video Recorder)
TIMESHIFT
DVD
TV
MODE
CABLE
AUDIO
- This function allows the unit to automatically record
live TV and make it available for reviewing at any time.
- With Timeshift turned on, you may pause and rewind
normal TV viewing at any time without missing any of the
live broadcast.
MARK
TIME MACHINE
U
MEN
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
1
VCR
R-
PIP PR +
SWAP
PIP IN
PUT
STATIONO Timeshift
PICTUREO Recorded TV
Press the M E N U button and then use D / E button
to select the D V R menu.
SOUNDO Manual Recording
TIMEO Scheduled List
SPECIALO Video Quality
SCREENO Format Hard Disk
PIP/DWO
2
Press the G button and then use D / E button to
select the Timeshift.
DVR{
Move
MENU
Menu
1
3
Press the G button and then use D / E button to
select O n or O f f.
Timeshift
Recorded TV
G
On
Off
Manual Recording
Scheduled List
Press the EXIT button to return to normal TV viewing.
Video Quality
Format Hard Disk
2 3
SPECIAL FUNCTIONS
4
29
SPECIAL FUNCTIONS
DVR (Digital Video Recorder)
PROGRESSING THE TIMESHIFT FUNCTION
1
1
2
3
4
The ‘Progress Bar’?
After selecting the Timeshift On, press the O K button.
This function indicates a possible DVR reshowing
section ,a current on-screen and real on-broad-
As soon as Timeshift starts, a progress bar indicating the
current recording status is displayed in the bottom of the
screen.
■ Press the E X I T button to hide the ‘Progress Bar’ or press
the O K button to display the 'Progress Bar'.
■ This function is preserved even change a programme on
progressing the Timeshift.
■
2
1
Status of current displayed video.
2
Current save time.
15 minute intervals from Timeshift start time.
3
(Total - one hour).
4
Indicates current Timeshift position.
When finishing the Timeshift function, enter the option
menu and turn Timeshift O f f.
SPECIAL FUNCTIONS
! NOTE
DVR (Digital Video Recorder) : A device which
records and plays broadcast program contents
onto a hard disk in set or SET TOP BOX.
In order to save hard-disk space, nothing is saved
when there is no signal.
The total storage space of the hard-disk is 80
GB. 4 GB minimum is reserved for Timeshift.
When turning power on, it may take up to maximum
3 minutes to initialize the HDD.
The Recording function will not initiate for a
copy-protected program.
30
casting position, a section of section-recording.
Because an analog broadcast is transfered to a
digital signal, video that contains rapid movement may show "cross stripes". This happens
when the analog signal is compressed and then
restored in the digital signal. The unit will
attempt to reduce this excessive picture noise.
When using the PIP/DW, POP mode, Timeshift is
stopped.
Timeshift is available in TV, AV1, AV2,
Component(480i/576i) mode.
Timeshift is not available for Audio only channels.
Progressing the Timeshift function, play
DVD
TV
VCR
MODE
CABLE
AUDIO
STB
- On progressing Timeshift, it can do a diversified playing.
MARK
U
MEN
LIVE
TIME MACHINE
Indicates that the current broadcast and displayed video differ.
OK
TIME
SHIFT
TIME
SHIFT
PIP P
Play
TV
EXIT
R-
PIP PR +
SWAP
PIP IN
PUT
Pause
VOL
PR
MUTE
TEXT
Using the remote control
You can shift playback to any point within playing the recorded program
When playing,
repeatedly, press the R E W(
x50 ->
x100 .
->
MARK
repeatedly, press the F F(
x100 .
x50 ->
->
■
) button to speed up
x2
->
->
x2
x5
x5
->
->
x10
x10
Pressing these buttons repeatedly increases the fast forward/reverse speed.
Press the
or
■
Press the
■
Pressing the
LIVE
TV
button to move back and forth within the current program.
button to jump at the front of the programme.
TV
Press the
■
D
LIVE
TV
button to jump at the end of the programme.
button to jump about 20 seconds forward.
Pressing the
E
button to jump about 8 seconds backward.
) button.
During playback, press the P a u s e (
Still screen is displayed.
■ Repetedly press the P a u s e (
) button to advance frame by frame.
SPECIAL FUNCTIONS
LIVE
MARK
) button to speed up
■
TIME
SHIFT
TIME
SHIFT
■
) button and then use the F F (
Press the P a u s e (
motion (as showing the
.)
■
When using the F or G button during playback the cursor can be viewed on
the screen.
Press the P L A Y (
LIVE
TV
MARK
) button for slow
) button to return to normal playback.
If you want to return to the current live broadcast, press the
LIVE
TV
button.
31
SPECIAL FUNCTIONS
DVR (Digital Video Recorder)
RECORDING
- Use this function to record the program you are watching on the main screen.
Instant Record
This function records the currently displayed programme.
1
Select the desired programme to record and then press the
button.
During recording
is displayed. Use this feature to record up to 2
hours of programming.
2
If you want to stop recording, press the
■
■
SPECIAL FUNCTIONS
3
button.
While recording, if you press the
button fewer
than 10 seconds, this message is displayed.
If you press the
button more than 10 seconds, this
message is displayed.
Recording is not completed.
Recording time must exceed 10 seconds.
Recording is completed.
You can add/subtract recording time by pressing the
button while recording. Press the F or G button repeatedly to add/subtract to the recording time.
Each time you press F or G button the recording duration changes as shown
below.
+ 10 m i n -> + 2 0 m i n -> + 3 0 m i n -> + 4 0 m i n -> + 5 0 m i n -> + 6 0 m i n
No Change
- 10 m i n -> - 2 0 m i n -> - 3 0 m i n -> - 4 0 m i n -> - 5 0 m i n -> - 6 0 m i n
32
The extra recording time added to existing setting equals
the final recording time.
TIME MACHINE
Recording time
00:00~02:00
(0
4
After adjusting the recording time, select O K. The Status
bar will be displayed.
00:00
min recorded)
No change
Total recording duration
3
0:00 / 2:00
Elapsed recording time
■
5
Press the E X I T button to hide the Status bar. Press the
O K button to display the Status bar.
Recording stops when the selected duration is reached or
when you press the
button.
Although recording has stopped, the Timeshift feature
remains active.
When recording, if the available storage space
becomes low, the recording will be automatically
stopped.
Recordings of less than 10 seconds will not be
saved.
To save disk space while recording broadcasts, no
data will be saved if there is no signal.
The recording function will not initiate for a
copy-protected program.
The displayed time slightly differ from the actual
time.
The recording can not be used with content-protected programs on progressing Timeshift .
SPECIAL FUNCTIONS
! NOTE
Stop recording due to copy protection.
If the old tape is recoreded, this may cause damage to the recording quality.
It will be stored separately the programme according
to the colour system signal.
In no signal or film source, the displayed time
slightly differ from the actual time.
33
SPECIAL FUNCTIONS
DVR (Digital Video Recorder)
SHIFT
SHIFT
WATCHING & RECORD
PIP P
- While recording, you can change programmes or inputs without disturbing the recording. The broadcast being recorded
can be shown in the lower-right corner of the main screen.
- It’s available to use this function in TV, AV1, AV2, Component
480i/576i modes.
PUT
R-
PIP PR +
SWAP
VOL
PIP IN
PR
MUTE
TEXT
LIST
Q.VIEW
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
?
PIP
1
After starting an Instant Record or Reserved Record,
change the programme or input.
You can check the show being recorded in the lower-right
corner the main screen (as shown below).
■ Press the P I P button to hide or show the program being
recorded.
■ Press the S W A P button to return to the program being
recorded in Watching & Record.
■ When changed to the programme recorded in Watching &
Record, the screen is changed to Instant Record state or
Reserved Record state.
■
Record Analog AV1 AV2 Component1 Component2
Watching
(480i/576i) (480i/576i)
SPECIAL FUNCTIONS
Analog
AV1
AV2
Component1
Component2
RGB
HDMI/DVI
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Watching & Record Input
CAUTION
If you turn the power off on recording, this message is
displayed as shown below.
Powering off while recording.
Continue recording?
Yes
No
If you selects No, recording stops and then power is off.
If you selects Yes, recording continues and the power is
turned off.
If you press the EXIT button to disappear this message.
34
screen being recorded
TV
RECORDED TV
VCR
MODE
CABLE
AUDIO
STB
MARK
- You can watch the recorded program list at a glance.
- This function is available to use in DVR menu.
LIVE
TIME MACHINE
U
MEN
TV
EXIT
OK
1
Press the
button to display H O M E menu.
Use the D or E button to select the Recorded TV and then
use the O K or G button.
TIME MACHINE
TIME MACHINE
PIP P
TIME MACHINE
Home
Free Space
Input
Date
Duration
Quality
Free Space
High
3h 19m
High
3h 19m
Normal
5h 24m
Normal
5h 24m
Recorded TV
:
:
:
:
Page 1/2
TIME
SHIFT
TIME
SHIFT
R-
PIP PR +
VOL
PUT
PR
TV 19
Sun.Jan 1 2006
1 min
High
0
PIP IN
SWAP
MUTE
TEXT
marked
No Title
TV 19
Sun.Jan 1
02:47
No Title
TV 19
Sun.Jan 1
02:46
Manual Rec.
No Title
TV 53
Sun.Jan 1
00:23
Scheduled List
No Title
TV 53
Sun.Jan 1
00:18
No Title
TV 58
Sun.Jan 1
00:04
TV Menu
Popup Menu
Move page
Mark
Exit
STB
AUDIO
RECORDED PROGRAM SELECTION
AND POPUP MENU
MARK
U
MEN
- The thumbnail recorded list is shown above.
LIVE
TV
TIME MACHINE
EXIT
OK
PIP P
R-
PIP PR +
PIP IN
SWAP
PUT
TIME MACHINE
1
2
Input
Date
Duration
Quality
Use the D or E button for page up/down navigation.
Free Space
Use the M A R K button to delete from the list. A
is displayed next to the thumbnail photo if an item is marked.
High
3h 19m
Normal
5h 24m
Popup Menu
:
:
:
:
Page 1/2
TV 19
Sun.Jan 1 2006
1 min
High
0
marked
No Title
TV 19
Sun.Jan 1
02:47
No Title
TV 19
Sun.Jan 1
02:46
No Title
TV 53
Sun.Jan 1
00:23
No Title
TV 53
Sun.Jan 1
00:18
No Title
TV 58
Sun.Jan 1
00:04
Move page
Mark
SPECIAL FUNCTIONS
TIME
SHIFT
TIME
SHIFT
Exit
1
TIME MACHINE
Input
Date
Duration
Quality
Free Space
High
3h 19m
Normal
5h 24m
Page 1/2
TV 19
Sun.Jan 1 2006
1 min
High
No Title
0 marked
1 marked
Sun.Jan 1 02:47
Unmark All
TV 19 Delete
Sun.Jan 1 02:46
No Title
TV 53
Cancel
Sun.Jan 1
00:23
No Title
TV 53
Sun.Jan 1
00:18
No Title
TV 58
Sun.Jan 1
00:04
No Title
Popup Menu
:
:
:
:
Move page
TV 19
Mark
Exit
2
35
SPECIAL FUNCTIONS
3
DVR (Digital Video Recorder)
Use
button to navigate the appropriate thumbnail photo, then press the O K button to open the Pop-up
Menu.
TIME MACHINE
Free Space
High
3h 19m
Normal
5h 24m
Play : Begin playback of selected recording.
Mark All : mark all photos on the screen.
Unmark All : Change marked photos to unmarked photos.
Delete : Delete the selected recording.
Rename : Edit recorded program title.
Cancel : Close the Pop-up Menu.
4
Input
Date
Duration
Quality
Page 1/2
TV 19
Sun.Jan 1 2006
1 min
High
0 marked
TV 19
Sun.Jan 1 02:47
02:47~02:48
No Title
TV 19
No Title
TV 19 PlaySun.Jan 1
Mark All
TV 53 Delete
Sun.Jan 1
No Title
Popup Menu
:
:
:
:
02:46
00:23
No Title
Rename
TV 53
Sun.Jan 1
Cancel
00:18
No Title
TV 58
00:04
Move page
Sun.Jan 1
Mark
Exit
3
Repeatedly, press E X I T button to return to TV viewing or
press
button to return to the H o m e menu.
TIME MACHINE
■
■
If the HDD has a problem performing a function
(Recording) related to the DVR, this message is displayed.
Hard disk initialisation is in progress.
If the temperature is below zero (0°), a warning message
is displayed and you need to initialize the HDD.
Cannot operate DVR at low temperature.
SPECIAL FUNCTIONS
4
PLAYING RECORDED PROGRAMS
- You can play the selected program in the recorded program list.
The ‘Progress Bar’?
1
Play a recorded program.
2
While playing, You can see a diversified playback screen as shown below.
At first, an icon showing current playback mode is displayed as marking
. Then press the O K button to display the progress bar
■ To stop displaying the recorded programs icon, press the E X I T button.
■
1
36
2
3
4
5
6
This function indicates a possible DVR
reshowing section ,a current on-screen
and real on-broadcasting position, a
section of section-recording.
1 Indicates movement of recorded
program.
2 Indicates status of recorded program.
3 Indicates elasped playback time.
4 Indicates total playback time.
5 Indicates a quarter of program runtime.
6 Indicates current playback position.
USING THE REMOTE CONTROL
You can shift playback to any point within playing the recorded program.
When playing,
repeatedly, press the R E W(
x50 ->
x100
->
.
MARK
repeatedly, press the F F(
-> x50 -> x100 .
■
) button to speed up
x2
->
->
x2
x5
x5
->
->
x10
x10
Pressing these buttons repeatedly increases the fast forward/reverse speed.
Press the
LIVE
MARK
) button to speed up
or
■
Press the
■
Pressing the
LIVE
TV
button to move back and forth within the current program.
button to jump at the front of the programme.
TV
Press the
■
D
LIVE
TV
button to jump at the end of the programme.
button to jump about 20 seconds forward.
Pressing the
E
button to jump about 8 seconds backward.
) button.
During playback, press the P a u s e (
Still screen is displayed.
■ Repetedly press the P a u s e (
) button to advance frame by frame.
■
) button and then use the F F (
Press the P a u s e (
motion (as showing the
.)
■
When using the F or G button during playback the cursor can be viewed on
the screen.
TIME
SHIFT
Press the P L A Y (
LIVE
TV
MARK
) button for slow
) button to return to normal playback.
If you want to return to the current live broadcast, press the
■
If you press the S T O P (
LIVE
TV
button.
SPECIAL FUNCTIONS
TIME
SHIFT
■
) button, you can watch set.
37
SPECIAL FUNCTIONS
DVR (Digital Video Recorder)
MANUAL RECORDING
MARK
U
MEN
- This function is easy to register to reserved recording.
- This function is available to use in DVR menu.
- When Manual Recording, it’s stored the default sound of the
set.
LIVE
TV
TIME MACHINE
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
PIP IN
VOL
PUT
PR
MUTE
TEXT
TIME MACHINE
Home
1
Press the
button to display H o m e menu. Use the
D or E button to select the M a n u a l R e c and then use
the O K or G button.
TIME MACHINE
Free Space
High
3h 19m
Normal
5h 24m
Recorded TV
2
SPECIAL FUNCTIONS
I n p u t : Select the input source from the TV, AV1, AV2,
Component1, Component2.
P R : Select either the current programme or a scanned
programme.
D a t e : You can select a date up to one month in the
future.
T i m e / D u r a t i o n : Ensure you have set correctly.
F r e q u e n c y : Choose among Once, Daily and Weekly.
3
38
M a n u a l R e c screen is displayed as shown below.
Use the
button to set the I n p u t, P R, D a t e,
T i m e, D u r a t i o n, F r e q u e n c y .
After setting the M a n u a l R e c , press the O K button.
Manual Rec.
Scheduled List
TV Menu
TIME MACHINE
2
SCHEDULED LIST
MARK
U
MEN
LIVE
TIME MACHINE
- You can store up to 8 programmes.
- This function is available to use in DVR menu.
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
PIP IN
PUT
O
TIME MACHINE
Home
1
Press the
button to display H o m e menu. Use the
D or E button to select the Scheduled List and then use
the O K or G button.
TIME MACHINE
Free Space
High
3h 19m
Normal
5h 24m
Recorded TV
Manual Rec.
2
Scheduled List screen is displayed as shown below.
Use the
button to select recorded programme.
Scheduled List
TV Menu
1
TIME MACHINE
VIDEO QUALITY
STATIONO Timeshift
PICTUREO Recorded TV
SOUNDO Manual Recording
TIMEO Scheduled List
- It’s not available to use this function on recording programme.
SPECIALO Video Quality
SCREENO Format Hard Disk
PIP/DWO
1
Press the M E N U button and then use D / E button
to select the D V R menu.
SPECIAL FUNCTIONS
2
DVR{
Move
MENU
Menu
1
2
Press the G button and then use D / E button to
select the Video Quality.
Timeshift
Recorded TV
Manual Recording
Scheduled List
3
Press the G button and then use D / E button to
select H i g h or Normal.
4
Press the EXIT button to return to normal TV viewing.
Video Quality
Format Hard Disk
G
High
Normal
2 3
39
SPECIAL FUNCTIONS
DVR (Digital Video Recorder)
FORMAT HARD DISK
MARK
U
MEN
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PUT
PIP PR +
SWAP
VOL
PR
MUTE
2
SOUNDO Manual Recording
TIMEO Scheduled List
SPECIALO Video Quality
SCREENO Format Hard Disk
Press the G button and then use D / E button to select
the Format Hard Disk.
3
Press the G button to start Format Hard Disk.
TEXT
STATIONO Timeshift
PICTUREO Recorded TV
Press the M E N U button and then use D / E button to
select the D V R menu.
1
PIP IN
PIP/DWO
DVR{
Move
MENU
Menu
1
■
if you press the G button, this message is displayed.
Timeshift
Recorded TV
Do you want to format HDD?
Yes
No
Manual Recording
Scheduled List
Video Quality
Hard disk
Disk
Format hard
G
To set
if you selects Yes, this message is displayed.
■
SPECIAL FUNCTIONS
Hard disk formatting is in progress.
2 3
When completing, this message is displayed.
■
Hard disk formatting completed.
4
40
Press the EXIT button to return to normal TV viewing.
SPECIAL FUNCTIONS PIP / POP / Twin Picture
PIP (PICTURE-IN-PICTURE) FEATURE
MARK
PIP lets you view 2 different inputs (sources) on your set screen
at the same time. One source will be large, and the other
source will show a smaller inset image.
It’s not available to use this function in TELETEXT mode.
Twin Picture mode splits the screen into two images, allowing
two picture sources to be shown on the set screen at the same
time. Each source is given half the screen.
When recording or playing, it’s not available to use this function.
U
MEN
LIVE
TIME MACHINE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
! NOTE
PIP PR +
LIST
When the sub picture size is 1/2 of the main picture,
the picture quality may decrease.
The motion of the sub picture can be unnatural because the
set displays full screen by synchronizing the main picture
source when the refresh rate between the main picture
source and the sub picture source is different in PIP mode.
PIP IN
SWAP
PUT
Q.VIEW
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
?
PIP
WATCHING PIP
Press the PIP button to access the sub picture.
Each press of PIP changes the PIP options as shown below.
PIP Mode
DW1 Mode
RGB
AV1
DW2 Mode
RGB
AV1
RGB
AV1
10:30
10:30
10:30
POP Mode
RGB
RGB
C 05 1
10:30
10:30
SPECIAL FUNCTIONS
PIP Off
ADJUSTING PIP TRANSPARENCY (PIP MODE ONLY)
1
Press the M E N U button and then D /
the PIP/DW menu.
2
Press the G button and then D /
PIP Transparency.
3
Press the G button and then F /
transparency.
4
Press the E X I T button to return to normal TV viewing.
E
G
E
button to select
button to select
button to adjust PIP
41
SPECIAL FUNCTIONS
PIP / POP / Twin Picture
PROGRAMME SELECTION FOR SUB PICTURE
1
Press the P I P P R + / - button to select a programme for the sub picture.
ADJUSTING THE SCREEN FOR THE PIP
1
In TV or AV modes for the main picture and RGB[PC] for the sub picture,
you can use Auto config and Manual config to adjust the screen of the sub
picture.
■ In TV or AV modes for main picture and HDMI[DTV] or Component
480p, 576p, 720p, 1080i for the sub picture, you can use Manual config
to adjust the screen of the sub picture.
SELECTING AN INPUT SIGNAL SOURCE FOR THE PIP
1
Press the P I P I N P U T button to select the input source for the sub picture.
■ In some models, when the sub picture quality get poor for sub picture, select Auto, PAL, SECAM or NTSC
■
in PIP System menu.
Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed as
shown below.
TV
AV1
AV2
RGB
AV1
Component1
10:30
SPECIAL FUNCTIONS
HDMI/DVI
RGB
Component2
SUB PICTURE SIZE ADJUSTMENT (PIP MODE ONLY)
1
Press the S I Z E button and then F / G button to adjust the sub picture size.
■
With S I Z E button in DW1, DW2 modes, main and sub picture is adjusted
simultaneously. With S I Z E button in PIP mode, sub picture is adjusted.
Win. size
F
G
MOVING THE PIP (PIP MODE ONLY)
1
Press the P O S I T I O N button.
■ Repeatedly press the D / E or F / G button until desired position is
achieved. The sub picture moves up/down or left/right.
Win. position
D
F
G
E
42
SWAPPING BETWEEN MAIN AND SUB PICTURES
1
Press the S W A P button to exchange the main and sub pictures.
SWAP
PIP
Main Picture
Sub Picture
SWAP
DW1
Main Picture
Sub Picture
DW2
Main Picture
Sub Picture
SPECIAL FUNCTIONS
SWAP
POP (PICTURE-OUT-OF-PICTURE: CHANNEL SCAN)
1
Use POP to search the programmes of all the memorized
channels one-by-one on the 3 PIP screen display, (while
the main picture source remains the current programme).
The pictures of all the programmed channels are searched
with the 3 POP screen.
43
SPECIAL FUNCTIONS Teletext
- Teletext (or TOP text) is an optional function, therefore only the set with the teletext system can receive the
teletext broadcast.
- Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
- The teletext decoder of this set can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP
and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
TELETEXT LANGUAGE SELECTION (OPTION)
1
2
3
4
5
Press the M E N U button and then use D /
Press the G button and then use D /
E
E
button to select the SPECIAL menu.
button to select Language .
Press the G button and then use G button to select Teletext Language .
Press the D /
E
button to select the required language.
Press the E X I T button to return to normal TV viewing.
! NOTE
a. Please select your local teletext language.
b. If you don't, the teletext may not appear correctly on the screen.
c. This feature is not available in all countries.
SPECIAL FUNCTIONS
44
SWITCH ON/OFF
1
Press the T E X T button to switch to teletext. The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page
number indicates your selection, while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
SIMPLE TEXT (OPTION)
A Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
2
The P R
D
/
E
button can be used to select the preceding or following page.
TOP TEXT (OPTION)
- The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A Block / group / page selection
1
2
3
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next
group.
■
4
Alternatively the PR D button can be used.
The red button permits to return to previous selection. Alternatively the PR E button can be used.
1
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number
using the NUMBER buttons in TOP mode.
FASTEXT
SPECIAL FUNCTIONS
A Direct page selection
- The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
Press the
4
The PR D /
button to select the index page.
i
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number
with the NUMBER buttons in FASTEXT mode.
E
button can be used to select the preceding or following page.
45
SPECIAL FUNCTIONS
Teletext
SPECIAL TELETEXT FUNCTIONS
REVEAL
Press this button to display concealed information, such as solutions
of riddles or puzzles.
Press this button again to remove the information from the display.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
UPDATE
Displays the TV picture on the screen while waiting for the new teletext page.
Press this button to view the updated teletext page.
HOLD
Stops the automatic page change which will occur if a teletext page
consists of 2 or more sub pages. The number of sub pages and the
sub page displayed is, usually, shown on the screen below the time.
When this button is pressed the stop symbol is displayed at the top
left-hand corner of the screen and the automatic page change is inhibited.
To continue press this button again.
SPECIAL FUNCTIONS
46
TIME
This button has two functions:
a) When viewing a TV programme, press this button to display the time
at the top right hand corner of the screen. Press this button again to
remove the display.
b) In teletext mode, press this button to select a sub page number. The
sub page number is displayed at the bottom of the screen. To hold or
change the sub page, press the RED/ GREEN or PR D / E buttons.
Press this button again to exit this function.
TV MENU
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual.
1
Press the M E N U button and then D / E button to display each menu.
2
Press the G button and then D / E button to select a menu item.
3
Change the setting of an item in the sub or pull-down menu with F / G button.
You can move to the higher level menu by pressing the O K or M E N U button.
STATION{ Auto programme
PICTUREO Manual programme
SOUNDO Programme edit
TIMEO Favourite programme
SOUNDO
SPECIALO
SPECIALO Contrast
SCREENO
SCREENO Brightness
50
PIP/DWO
PIP/DWO Colour
MENU
Menu
SOUND{ Balance
TIMEO Treble
TIMEO ACM
DVRO
Move
STATIONO SSM
PICTUREO AVL
STATIONO PSM
PICTURE{ CSM
Move
MENU
SPECIALO Bass
SCREENO TV Speaker
100
50
PIP/DWO
DVRO Sharpness
50
DVRO
Tint
0
Move
Menu
STATION menu
SOUND menu
STATIONO Clock
PICTUREO Off time
SOUNDO Manual Recording
TIMEO Scheduled List
SOUNDO On time
TIME{ Auto sleep
SPECIALO Video Quality
SCREENO Format Hard Disk
SPECIALO
SCREENO
PIP/DWO
PIP/DWO
DVR{
DVRO
Menu
Move
MENU
Menu
DVR menu
TIME menu
STATIONO Input
PICTUREO DW
STATIONO Auto config.
PICTUREO Manual config.
SOUNDO PIP
SPECIALO Win.size
SPECIALO Cinema
SCREENO Win.position
SCREEN{ NR
PIP/DW{ PIP Transparency
PIP/DWO Reset
MENU
Menu
SPECIAL{ Set ID
SCREENO
Demo
PIP/DWO
DVRO
Move
PIP/DW menu
SOUNDO ISM Method
TIMEO Low power
TIMEO ARC
DVRO PIP System
Move
STATIONO Language
PICTUREO Child lock
SOUNDO XGA Mode
TIMEO PIP Input
MENU
TV MENU
MENU
50
Menu
PICTURE menu
STATIONO Timeshift
PICTUREO Recorded TV
Move
MENU
0
50
DVRO
Menu
Move
MENU
SCREEN menu
Menu
SPECIAL menu
! NOTE
a. In the teletext mode, menus are not displayed.
b. It’s not available to use STATION, PIP/DW menu on playing recorded programme.
47
TV MENU
Setting up TV stations
MODE
AUTO PROGRAMME TUNING
CABLE
AUDIO
STB
MARK
- All stations that can be received are stored by this method. It is recommended
that you use auto programme during installation of this set.
- It’s not available to use this function on recording programme.
U
MEN
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
1
Press the M E N U button and then D /
STATION menu.
2
Press the G button and then D /
programme.
E button to select the
PR
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
E button to select Auto
Select a TV system with the F /
PUT
STATION{ Auto programme
PICTUREO Manual programme
SCREENO
PIP/DWO
DVRO
Press the G button to select System.
3
4
PIP IN
G button;
L : SECAM L/L’ (option)
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa /Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines) (option)
TV MENU
5
6
Press the E button to select Storage from.
7
8
Press the E button to select Start.
Move
MENU
Menu
1
Auto programme
G
G
Manual programme
Programme edit
System
Storage from
Start
BG
1
Favourite programme
Select the beginning programme number with the F / G
button or NUMBER buttons on the Storage from menu.
2 3 4 5 6 7
Press the G button to begin auto programming.
All receivable stations are stored.
! NOTE
In some models, the station name is stored for stations which
broadcast VPS (Video Programme Service), PDC (Programme
Delivery Control) or TELETEXT data. If no station name can be
assigned to a station, the channel number is assigned and stored
as C (V/UHF 01-69) or S (Cable 01-47), followed by a number.
Auto programme
Name
C 05
System
M
Storage
Menu
5
65
%
Stop
8 9
9
10
48
To stop auto programming, press the M E N U button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the ‘Programme edit’ section
to edit the stored programme.
Press the EXIT button to return to normal TV viewing.
LIVE
TV
MANUAL PROGRAMME TUNING
U
MEN
TIME MACHINE
EXIT
OK
TIME
SHIFT
TIME
SHIFT
- Manual programme lets you manually tune and arrange the stations
in whatever order you desire. Also you can assign a station name with
five characters to each programme number.
PIP P
R-
PIP PR +
SWAP
VOL
MUTE
TEXT
LIST
Press the M E N U button and then D /
the STATION menu.
2
Press the G button and then D /
Manual programme.
E
E
T
PR
- It’s not available to use this function in Timeshift On mode.
- It’s not available to use this function on recording programme.
1
PU
PIP IN
Q.VIEW
STATION{ Auto programme
PICTUREO Manual programme
button to select
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
button to select
SCREENO
PIP/DWO
DVRO
3
Press the G button to select Storage. Select the desired
programme number with the F / G button or NUMBER
buttons on the Storage menu.
Press the E button to select System.
5
Select a TV system with the F / G button;
L : SECAM L/L’ (option)
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa /Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines) (option)
6
Press the E button to select Band.
7
Press the F /
8
Press the E button to select Channel.
9
You can select the desired channel number with the F / G
button or NUMBER buttons. If possible, select the channel
number directly with the number buttons.
10
Press the E button to select Search.
11
Press the F / G button to commence searching. If a station
is found the search will stop.
12
Press the O K button to store it.
13
To store another station, repeat steps 3 to 1 2.
14
Press the EXIT button to return to normal TV viewing.
G
button to select V/UHF or Cable as required.
MENU
Menu
1
Auto programme
Manual programme
Programme edit
Favourite programme
G
Storage
System
Band
Channel
Fine
Search
Name
Booster
5
BG
V/UHF
5
C 05
Off
TV MENU
4
Move
2 3 4 5 6
7 8 9 10 11 12
49
TV MENU
Setting up TV stations
MODE
FINE TUNING
AUDIO
CABLE
STB
MARK
- Normally fine tuning is only necessary if reception is poor.
U
MEN
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PUT
PIP PR +
SWAP
VOL
1
Press the M E N U button and then D /
STATION menu.
E
PIP IN
PR
STATION{ Auto programme
PICTUREO Manual programme
button to select the
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
2
Press the G button and then D /
programme.
3
Press the G button and then D /
4
Press the F /
and sound.
G
SCREENO
E button to select Manual
PIP/DWO
DVRO
E
button to select Fine.
Move
MENU
Menu
1
button to to fine tune for the best picture
Auto programme
5
Press the OK button.
Manual programme
Programme edit
Favourite programme
TV MENU
6
Press the EXIT button to return to normal TV viewing.
The finely tuned programme will be indicated by yellow
number during programme selection.
Storage
System
Band
Channel
Fine
Search
Name
5
BG
V/UHF
5
FG
C 05
Off
Booster
Store
2 3 4 5
50
MODE
ASSIGNING A STATION NAME
AUDIO
CABLE
MARK
- You can assign a station name with five characters to each programme number.
U
MEN
TIME MACHINE
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
1
Press the M E N U button and then D /
STATION menu.
2
Press the G button and then D /
programme.
E
PIP IN
PUT
PR
STATION{ Auto programme
PICTUREO Manual programme
button to select the
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
SCREENO
E button to select Manual
3
Press the G button to display the Name menu.
4
Press the D button. You can use a blank, +, -, the alphabet
A to Z and the numeric 0 to 9.
With the E button you can select in the opposite direction.
PIP/DWO
DVRO
Move
MENU
Menu
1
5
7
Press the OK button in twice.
Press the EXIT button to return to normal TV viewing.
Manual programme
Programme edit
Favourite programme
Storage
System
Band
Channel
Fine
Search
Name
5
BG
V/UHF
5
G
+C 05
Off
Booster
Store
G
Edit
TV MENU
6
Select the next position by pressing the G button and then
take your choice of the second character, and so on.
Auto programme
2 3 4 5 6
51
TV MENU
Setting up TV stations
MODE
BOOSTER (OPTION)
AUDIO
CABLE
STB
MARK
- In some models, B o o s t e r is an optional function. Only a set
with B o o s t e r can perform this function.
- If the reception is poor at the fringe area of TV signal, select
B o o s t e r to O n.
U
MEN
TIME MACHINE
PIP P
TIME
SHIFT
R-
PIP PR +
SWAP
VOL
Press the M E N U button and then D /
STATION menu.
E
TV
OK
TIME
SHIFT
1
LIVE
EXIT
PIP IN
PUT
PR
STATION{ Auto programme
PICTUREO Manual programme
button to select the
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
SCREENO
2
Press the G button and then D /
programme.
PIP/DWO
E button to select Manual
DVRO
Move
TV MENU
3
Press the G button and then use D /
Booster.
4
Press the F / G button to select On or Off.
E
MENU
Menu
button to select
1
Auto programme
Manual programme
Programme edit
Favourite programme
5
Press the OK button.
6
Press the EXIT button to return to normal TV viewing.
Storage
System
Band
5
BG
V/UHF
Channel
Fine
Search
Name
5
+ C 05
F G Off
Booster
Store
2 3 4 5
52
E TV
PROGRAMME EDIT
U
MEN
TIME MACHINE
EXIT
OK
- This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
- It’s not available to use this function on recording programme.
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
PIP IN
VOL
PR
MUTE
1
Press the M E N U button and then D /
STATION menu.
E
2
Press the G button and then D /
Programme edit.
button to select
3
Press the G button to display the Programme edit menu.
E
LIST
button to select the
Press the EXIT button to return to normal TV viewing.
Q.VIEW
STATION{ Auto programme
PICTUREO Manual programme
A
4
TEXT
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
SCREENO
PIP/DWO
DVRO
Move
MENU
Menu
1
TV MENU
Deleting a programme
1.Select a programme to be deleted with the
D / E / F / G button.
2.Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
A Copying a programme
1.Select a programme to be copied with the D / E / F / G
button.
2.Press the GREEN button.
All the following programmes are shifted down one position.
A Moving a programme
1.Select a programme to be moved with the D / E / F / G
button.
2.Press the YELLOW button.
3.Move the programme to the desired programme number
with the D / E / F / G button.
4.Press the YELLOW button again to release this function.
A Skipping a programme number
1.Select a programme number to be skipped with the D / E
/ F / G button.
2.Press the BLUE button. The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you
will be unable to select it using the PR D / E button dur
ing normal TV viewing. If you want to select the skipped
programme, directly enter the programme number with the
NUMBER buttons or select it in the programme edit or
table menu.
PUT
Auto programme
Manual programme
Programmeedit
edit
Programme
To set
G
Favourite programme
2
Programme edit
0
C 02
6
S 15
1
+ C 04
7
S 16
2
C 05
8
S 17
3
C 06
9
S 18
4
S 14
10
S 19
Delete
Move
Copy
Skip
Menu
3
53
TV MENU
Setting up TV stations
E TV
FAVOURITE PROGRAMME
U
MEN
TIME MACHINE
EXIT
OK
TIME
SHIFT
TIME
SHIFT
This function lets you select your favourite programmes directly.
Repeatedly press the F A V button to select stored favourite programmes.
PIP P
R-
PIP PR +
SWAP
PU
PIP IN
VOL
PR
MUTE
1
Press the M E N U button and then D /
the STATION menu.
2
Press the G button and then D /
Favourite programme.
E
T
TEXT
button to select
LIST
E button to select
Q.VIEW
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
?
3
Press the G button to display the Favourite programme
menu.
4
Press the D /
5
Select a desired programme with the F / G button or
NUMBER buttons. Any number under 10 is entered with a
numeric ‘0’ (or ‘00’) in front of it, i.e.‘05’ (or ‘005’) for 5.
E
button to select - - - - - - -.
STATION{ Auto programme
PICTUREO Manual programme
SOUNDO Programme edit
TIMEO Favourite programme
SPECIALO
SCREENO
6
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
7
Press the OK button.
8
Press the EXIT button to return to normal TV viewing.
PIP/DWO
DVRO
Move
MENU
Menu
1
TV MENU
Auto programme
Manual programme
Programme edit
Favourite programme
G
-
0
C
-
-
-
02
-
-
-
2 3 4 5 6 7
54
XIT
MEN
CALLING THE PROGRAMME TABLE
OK
TIME
SHIFT
TIME
SHIFT
- You can check the programmes stored in the memory by
displaying the programme table.
PIP P
R-
PIP PR +
SWAP
PIP IN
VOL
PR
MUTE
A
Displaying programme table
Press the L I S T button to display the Programme table menu.
The programme table appears on the screen.
TEXT
LIST
SIZE
PUT
Q.VIEW
POSITION
INDEX
TIME
! NOTE
a. You may find some blue highlighted programmes shown. They
have been set up in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
Selecting a programme in the programme table
Select a programme with the D / E / F / G button.
Then press the O K button.
The set switches to the chosen programme number.
A
Paging through a programme table
There are 10 programme table pages in which contain 100 programmes.
Pressing the D / E / F / G button repeatedly turns the pages.
0
C 02
6
S 15
1
C 04
7
S 16
2
C 05
8
S 17
3
C 06
9
S 18
4
S 14
10
S 19
TV MENU
A
Programme list
Press the L I S T button to return to normal TV viewing.
55
TV MENU
Picture Menu Options
PSM (PICTURE STATUS MEMORY)
CABLE
AUDIO
STB
MARK
U
MEN
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
Press the M E N U button and then D /
the PICTURE menu.
E
PUT
PR
MUTE
1
PIP IN
TEXT
button to select
STATIONO PSM
PICTURE{ CSM
2
Press the G button and then D /
E
SOUNDO
button to select PSM.
TIMEO ACM
SPECIALO Contrast
3
Press the G button and then D / E button to select
Dynamic, Standard, Mild or User.
Move
TV MENU
56
100
SCREENO Brightness
50
PIP/DWO Colour
50
MENU
DVRO Sharpness
50
Tint
0
Menu
1
4
Press the EXIT button to return to normal TV viewing.
This function adjusts the set to the best picture appearance.
Select the preset value in the PSM menu based on the
programme category.
A When adjusting picture options (contrast, brightness, colour,
sharpness and tint (NTSC input only)) manually, PSM is
automatically changed to User.
A Picture options D y n a m i c , S t a n d a r d , M i l d and U s e r
are preset and programmed for good picture quality at the
factory and cannot be changed.
A
PSM
G
CSM
ACM
Contrast
100
Brightness
50
Colour
50
Sharpness
50
Tint
Dynamic
Standard
Mild
User
0
2 3
CSM (COLOUR STATUS MEMORY)
CABLE
AUDIO
MARK
- To initialize values (reset to default settings), select the
N o r m a l option.
U
MEN
- When adjusting colour temperature options (red, green, or
blue) manually, CSM automatically changes to U s e r.
TIME MACHINE
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
2
Press the G button and then D /
3
Press the G button and then use D /
the desired colour temperature.
E
E
PIP IN
PUT
PR
MUTE
Press the M E N U button and then D /
the PICTURE menu.
LIVE
TV
EXIT
OK
TIME
SHIFT
- Choose one of three automatic colour adjustments. Set to warm
to enhance hotter colours such as red, or set to cool to see less
intense colours with more blue.
1
STB
TEXT
button to select
button to select CSM.
E
STATIONO PSM
PICTURE{ CSM
button to select
SOUNDO
TIMEO ACM
4
SPECIALO Contrast
Press the EXIT button to return to normal TV viewing.
Move
100
SCREENO Brightness
50
PIP/DWO Colour
50
MENU
DVRO Sharpness
50
Tint
0
Menu
PSM
CSM
G
ACM
Contrast
100
Brightness
50
Colour
50
Sharpness
50
Tint
Cool
Normal
Warm
User
Red
Green
Blue
TV MENU
1
0
0
0
0
2 3
57
TV MENU
Picture Menu Options
MANUAL COLOUR TEMPERATURE CONTROL
(CSM - USER OPTION)
CABLE
AUDIO
MARK
U
MEN
TIME MACHINE
- You can adjust red, green, blue to any colour temperature you
prefer.
PIP P
R-
PIP PR +
SWAP
2
Press the G button and then D /
E
PUT
TEXT
button to select
button to select CSM.
3
Press the G button and then D /
4
Press the G button and then use D /
make appropriate adjustments.
E
PIP IN
PR
MUTE
E
TV
TIME
SHIFT
VOL
Press the M E N U button and then D /
the PICTURE menu.
LIVE
EXIT
OK
TIME
SHIFT
1
STB
STATIONO PSM
PICTURE{ CSM
button to select User.
SOUNDO
TIMEO ACM
5
E
/ F / G button to
SPECIALO Contrast
50
PIP/DWO Colour
50
DVRO Sharpness
50
Tint
0
Press the EXIT button to return to normal TV viewing.
Move
100
SCREENO Brightness
MENU
Menu
TV MENU
1
PSM
CSM
G
ACM
Contrast
100
Brightness
50
Colour
50
Sharpness
50
Tint
Cool
Normal
Warm
User
Red
Green
Blue
0
0
0
0
2 3 4
58
FUNCTION
CABLE
AUDIO
MARK
- XD is LG Electronic's unique picture improving technology to
display a real HD source through an advanced digital signal
processing algorithm.
- You can enjoy the vivid and hi-definition picture with LG’s
Excellent Digital Reality processor technology.
- It’s not available to use this function in RGB[PC] or HDMI[PC]
modes.
- When selecting picture options (Dynamic, Standard and
Mild) in PICTURE menu, XD is automatically changed to On.
1
Press the M E N U button and then D /
the PICTURE menu.
E
U
MEN
TIME MACHINE
3
Press the G button and then D /
Press the G button and then D /
On or Off.
E
E
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
PIP IN
PUT
PR
MUTE
TEXT
STATIONO PSM
PICTURE{ CSM
button to select
SOUNDO
TIMEO ACM
SPECIALO Contrast
2
STB
button to select XD.
50
PIP/DWO Colour
50
DVRO Sharpness
50
Tint
0
button to select
Move
100
SCREENO Brightness
MENU
Menu
4
Press the EXIT button to return to normal TV viewing.
PSM
TV MENU
1
CSM
G
ACM
Contrast
100
Brightness
50
Colour
50
Sharpness
50
Tint
On
Off
0
2 3
59
TV MENU
Picture Menu Options
sRGB FUNCTION
CABLE
AUDIO
MARK
U
MEN
- When the set is connected to external equipment with the
sRGB function, the colour difference is adjusted the equal
image of each other.
- This function works in the following mode : RGB[PC],
HDMI[PC].
TIME MACHINE
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
2
Press the G button and then D /
3
Press the G button and then D /
or Off.
E
E
E
PUT
TEXT
button to select
button to select sRGB.
STATIONO PSM
PICTURE{ CSM
button to select On
SOUNDO
TIMEO sRGB
SPECIALO Contrast
4
PIP IN
PR
MUTE
Press the M E N U button and then D /
the PICTURE menu.
LIVE
TV
EXIT
OK
TIME
SHIFT
VOL
1
STB
SCREENO Brightness
Press the EXIT button to return to normal TV viewing.
100
50
PIP/DWO
DVRO
Move
MENU
Menu
TV MENU
1
PSM
CSM
sRGB
sRGB
Contrast
Brightness
G
100
On
Off
50
2 3
60
ACM (ACTIVE COLOUR MANAGEMENT)
CABLE
AUDIO
MARK
U
MEN
- Adjust the ACM to select the desired skin colour option.
- This function works in the following mode:
TV, AV1, AV2, COMPONENT, RGB[DTV], HDMI[DTV].
- It’s not available to use this function in XD Off mode.
TIME MACHINE
STB
LIVE
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
PIP IN
VOL
Press the M E N U button and then D /
the PICTURE menu.
2
Press the G button and then D /
3
E
E
TEXT
button to select
button to select ACM.
Press the G button and then use F /
appropriate adjustments.
G
STATIONO PSM
PICTURE{ CSM
button to make
SOUNDO
TIMEO ACM
SPECIALO Contrast
4
PUT
PR
MUTE
1
TV
EXIT
Press the EXIT button to return to normal TV viewing.
Move
100
SCREENO Brightness
50
PIP/DWO Colour
50
MENU
DVRO Sharpness
50
Tint
0
Menu
PSM
TV MENU
1
CSM
ACM
Contrast
G
100
Brightness
50
Colour
50
Sharpness
50
Tint
Fleshtone
Greentone
Bluetone
0
0
0
0
2 3
61
TV MENU
Picture Menu Options
MANUAL PICTURE CONTROL
CABLE
AUDIO
MARK
U
MEN
- You can adjust picture contrast, brightness, colour, sharpness
and tint (NTSC input only) to the levels you prefer.
- It’s not available to use colour, sharpness function in
RGB[PC], HDMI[PC] mode.
- In the broadcasting system PAL/SECAM, the picture item Tint
doesn’t work.
TIME MACHINE
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
2
Press the G button and then use D /
the desired picture option.
E
Press the G button and then use F /
appropriate adjustments.
G
3
4
E
PIP IN
PUT
PR
MUTE
Press the M E N U button and then D /
the PICTURE menu.
LIVE
TV
EXIT
OK
TIME
SHIFT
VOL
1
STB
TEXT
button to select
button to select
STATIONO PSM
PICTURE{ CSM
SOUNDO
button to make
TIMEO ACM
SPECIALO Contrast
Press the EXIT button to return to normal TV viewing.
Move
100
SCREENO Brightness
50
PIP/DWO Colour
50
MENU
DVRO Sharpness
50
Tint
0
Menu
TV MENU
1
PSM
CSM
ACM
Contrast
Contrast
100
100G
Brightness
50
Colour
50
Sharpness
50
Tint
0
2 3
62
Sound Menu Options
TV MENU
SSM (SOUND STATUS MEMORY)
CABLE
AUDIO
STB
MARK
- This function lets you enjoy the best sound without any special
adjustment because the set automatically selects the appropriate sound option based on the program content.
- When adjusting sound options (treble and bass) manually,
SSM is automatically changed to User.
- The sound SRS TSXT, Flat, Music, Movie and Sports are programmed for good sound reproduction at the factory and cannot be changed.
U
MEN
TIME MACHINE
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
Press the M E N U button and then D /
the SOUND menu.
E
3
Press the G button and then D / E button to select SRS
TSXT, Flat, Music, Movie, Sports or User.
PR
SPECIALO Bass
SCREENO TV Speaker
DVRO
Move
MENU
Menu
1
SSM
R
a.
is a trademark of SRS Labs, Inc.
b. TruSurround XT technology is incorporated under license
from SRS Labs, Inc.
TruSurround XT
50
PIP/DWO
Press the E X I T button to return to normal TV viewing.
! NOTE
0
50
G
AVL
Balance
0
Treble
50
Bass
50
SRS TSXT
Flat
Music
Movie
Sports
User
TV MENU
4
E
PUT
TEXT
SOUND{ Balance
TIMEO Treble
button to select SSM.
Press the G button and then D /
PIP IN
STATIONO SSM
PICTUREO AVL
button to select
2
SWAP
VOL
MUTE
1
LIVE
TV
EXIT
TV Speaker
2 3
63
TV MENU
Sound Menu Options
AVL (AUTO VOLUME LEVELER)
CABLE
AUDIO
MARK
- AVL automatically keeps on an equal volume level even if you
change programmes.
U
MEN
TIME MACHINE
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
Press the M E N U button and then D /
the SOUND menu.
E
Press the G button and then D /
3
Press the G button and then D /
4
Press the E X I T button to return to normal TV viewing.
E
TEXT
STATIONO SSM
PICTUREO AVL
button to select
2
PUT
PR
MUTE
1
PIP IN
SOUND{ Balance
TIMEO Treble
SPECIALO Bass
SCREENO TV Speaker
button to select AVL.
0
50
50
PIP/DWO
DVRO
E button to select On
or Off.
Move
MENU
Menu
TV MENU
1
SSM
AVL
G
Balance
0
Treble
50
Bass
50
On
Off
TV Speaker
2 3
64
ADJUSTING SOUND CONTROL
CABLE
AUDIO
MARK
TIME MACHINE
U
MEN
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP
1
2
3
4
Press the M E N U button and then D /
the SOUND menu.
E
Press the G button and then use D /
the desired sound item.
E
Press the G button and then use F /
appropriate adjustments.
G
UT
STATIONO SSM
PICTUREO AVL
button to select
SOUND{ Balance
TIMEO Treble
0
50
SPECIALO Bass
SCREENO TV Speaker
button to select
50
PIP/DWO
DVRO
button to make
Move
MENU
Menu
1
Press the E X I T button to return to normal TV viewing.
SSM
AVL
Balance
0
Treble
Treble
! NOTE
5050
G
Bass
50
TV Speaker
a. Treble or Bass aren’t suitable for use with SRS TSXT.
2 3
You can adjust the internal speaker status.
In AV1, AV2, COMPONENT, RGB and HDMI/DVI with HDMI to
DVI cable, TV speaker and/or variable audio can be outputted
even though there is no video signal.
If you want to use your external hi-fi stereo system, turn off
the internal speakers of the set.
MARK
TIME MACHINE
U
MEN
TV MENU
TV SPEAKER
CABLE
AUDIO
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R
IP IN
PUT
SSM
1
Press the M E N U button and then D /
the SOUND menu.
E
button to select
Balance
2
Press the G button and then D /
Speaker.
3
Press the G button and then D /
4
Press the E X I T button to return to normal TV viewing.
E
button to select TV
E button to select On
AVL
0
Treble
50
Bass
50
TV Speaker
G
On
Off
or Off.
2 3
65
TV MENU
Sound Menu Options
STEREO/DUAL RECEPTION
VOL
PR
MUTE
TEXT
- When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
LIST
Q.VIEW
SIZE
POSITION
INDEX
TIME
REVEAL
HOLD
SLEEP
FAV
ARC
I/II
?
PIP
1
On Screen Display
Press the I/II button to received broadcast state.
Broadcast
Mono
Stereo
Dual
On Screen Display
MONO
STEREO
DUAL I
TV MENU
2
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II
button twice. In mono reception the depth of sound is improved. To switch back to stereo,
press the I/II button twice again.
3
Language selection for dual language broadcast
If a programme received in two languages (dual language), you can switch to DUAL I,
DUAL II or DUAL I+II by pressing the I/II button repeatedly.
• DUAL I sends the primary broadcast language to the loudspeakers.
• DUAL II sends the secondary broadcast language to the loudspeakers.
• DUAL I+II sends a separate language to each loudspeaker.
66
NICAM RECEPTION (OPTION)
If the set is equipped with the receiver for NICAM reception, the high quality NICAM
(Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by pressing the I / I I button repeatedly.
1
When NICAM mono is received, you can select NICAM MONO or FM MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the
stereo signal is weak, switch to FM mono.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II, NICAM
DUAL I + II, or MONO. When FM mono is selected the display MONO appears on the
screen.
SOUND OUTPUT SELECTION
TV MENU
- In AV, Component, RGB or HDMI/DVI mode, you can select output sound for the left and right
loudspeakers.
Repeatedly press the I/II button to select the sound output.
• L+R : Audio signal from audio L input is sent to left loud-speaker and audio signal from
audio R input is sent to right loud-speaker.
• L+L : Audio signal from audio L input is sent to left and right loud-speakers.
• R+R : Audio signal from audio R input is sent to left and right loud-speakers.
67
TV MENU
Time Menu Options
SETTING THE CLOCK
CABLE
AUDIO
STB
MARK
U
MEN
- If current time setting is erased by a power failure or the set
is unplugged, reset the clock.
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
P UT
PIP PR +
SWAP
PIP IN
VOL
PR
MUTE
1
Press the MENU button and then use D /
select the TIME menu.
E
TEXT
STATIONO Clock
PICTUREO Off time
button to
SOUNDO On time
TIME{ Auto sleep
SPECIALO
2
3
Press the G button and then use D /
Clock.
E
Press the G button and then use D /
the hour.
E
SCREENO
button to select
PIP/DWO
DVRO
button to adjust
Move
MENU
1
TV MENU
Clock
4
5
Press the G button and then use D /
the minute.
Menu
E
button to adjust
G
Year
2006
Off time
Date
1
/
1
On time
Time
00
:
03
Auto sleep
Press the E X I T button to return to normal TV viewing.
2 3 4
68
SETTING THE ON/OFF TIME
CABLE
AUDIO
STB
MARK
- Time function operates only if current time has been already set.
- Off Time function overrides On Time function if they are set to the same time.
- The set must be in standby mode for the On Time to work.
U
MEN
LIVE
TV
TIME MACHINE
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
PIP IN
SWAP
VOL
PR
MUTE
1
Press the MENU button and then use D /
select the TIME menu.
2
Press the G button and then use D /
Off time or On time.
PUT
TEXT
STATIONO Clock
PICTUREO Off time
E button to
SOUNDO On time
TIME{ Auto sleep
SPECIALO
E
button to select
SCREENO
PIP/DWO
DVRO
E button to select On.
Press the G button and then use D /
4
Press the G button and then use D /
the hour.
E button to adjust
Press the G button and then use D /
the minute.
E
Move
5
MENU
Menu
1
Clock
button to adjust
Off time
On time
Auto sleep
G
On
Off
12
6
7
Only On time function; Press the G button and then use
D / E button to adjust programme number or volume
level.
Press the E X I T button to return to normal TV viewing.
:
Vol.
Programme
00
TV MENU
3
30
1
2 3 4
5 6
! NOTE
a. To cancel Off/On time function. Press the D / E button
to select Off in step 3.
b. Two hours after the set is switched on by the On time
function it will automatically switch back to standby mode
unless a button has been pressed.
69
TV MENU
Time Menu Options
E TV
AUTO SLEEP
U
MEN
TIME MACHINE
EXIT
OK
TIME
SHIFT
TIME
SHIFT
If set to on and there is no input signal, the set turns off
automatically after 10 minutes.
PIP P
R-
PIP PR +
SWAP
VOL
Press the MENU button and then use D /
select the TIME menu.
2
Press the G button and then use D /
Auto sleep.
E
Press the G button and then use D /
On or Off.
E
E
PUT
PR
MUTE
1
PIP IN
TEXT
STATIONO Clock
PICTUREO Off time
button to
SOUNDO On time
TIME{ Auto sleep
SPECIALO
3
4
SCREENO
button to select
PIP/DWO
DVRO
button to select
Press the E X I T button to return to normal TV viewing.
Move
MENU
Menu
1
Clock
Off time
On time
Auto sleep
TV MENU
2 3
SLEEP TIMER
LIST
- Sleep timer turns the set off at the preset time.
- Press the SLEEP button to select the number of minutes. The
zz
--- Min will appear on the screen, followed by 10,
display
20, 30, 60, 90, 120, 180 and 240 minutes.
The timer begins to count down from the number of minutes
selected.
70
On
Off
G
1
To check the remaining sleep timer, press the SLEEP button
once.
2
To cancel the sleep timer, repeatedly press the SLEEP button
z
until the display z --- Min appears.
3
If you turn the set off after setting the sleep timer, the setting
will be erased.
SIZE
REVEAL
Q.VIEW
POSITION
INDEX
TIME
HOLD
SLEEP
FAV
ARC
I/II
?
PIP
zz
------ Min
TV MENU
Special Menu Options
CHILD LOCK
INPUT
POWER
DVD
TV
MODE
CABLE
AUDIO
- The set can be set so that the remote control handset is
needed to control it.
- This feature can be used to prevent unauthorized viewing.
MARK
M
ENU
TIME MACHINE
MULTIMEDIA
VCR
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PR -
PIP PR +
SWAP
VOL
PR
MUTE
TEXT
POSITION
INDEX
LIST
SIZE
1
Press the MENU button and then use D /
select the SPECIAL menu.
2
Press the G button and then use D /
Child lock.
E
Press the G button and then use D /
On or Off.
E
3
4
PIP IN
Q.VIEW
TIME
STATIONO Language
PICTUREO Child lock
E button to
SOUNDO ISM Method
TIMEO Low power
SPECIAL{ Set ID
SCREENO
Demo
PIP/DWO
button to select
DVRO
button to select
Press the E X I T button to return to normal TV viewing.
Move
MENU
Menu
1
Language
ISM Method
G
On
Off
TV MENU
Child lock
Low power
Set ID
Demo
2 3
! NOTE
- The set is programmed to remember which option it was last set to even if you turn the set off.
- In Child lock ‘on’, if the set is turned off, press the r/I, INPUT, PR D / E button on the set or
POWER, INPUT, MULTIMEDIA, PR D / E or NUMBER buttons on the remote control.
- With the Child lock on, the display ‘ i Child lock on’ appears on the screen if any button on the front
panel is pressed while viewing the set.
71
TV MENU
Special Menu Options
ISM (IMAGE STICKING MINIMIZATION) METHOD
AUDIO
CABLE
STB
MARK
- A frozen of still picture from a PC/video game displayed on the
screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the set's screen for a long period of time.
- It’s not available to use this function in LCD TV models.
U
MEN
TIME MACHINE
LIVE
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
Press the MENU button and then use D /
select the SPECIAL menu.
2
Press the G button and then D /
Method.
3
E
PIP IN
PUT
PR
MUTE
1
TV
EXIT
TEXT
STATIONO Language
PICTUREO Child lock
button to
SOUNDO ISM Method
TIMEO Low power
SPECIAL{ Set ID
SCREENO
Demo
PIP/DWO
E button to select ISM
DVRO
Press the G button and then D / E button to select
either Normal, White wash, Orbiter or Inversion. If
you don’t need to set this function, set Normal.
Move
MENU
Menu
1
Language
TV MENU
• White wash :
White Wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible
to clear entirely with White Wash.
• Orbiter :
Orbiter may help prevent ghost images. However, it is
best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen, the
screen will move every 2 minutes.
• Inversion :
This is the function to invert the panel colour of the
screen. The panel colour is automatically inverted every
30 minutes.
• Normal :
When input signal is constantly static or temperature is
high, brightnest level will be decrase automatically for
image sticking minimalization.
4
72
Press the E X I T button to return to normal TV viewing.
Child lock
ISM Method
G
Normal
Low power
White wash
Set ID
Orbiter
Demo
Inversion
2 3
AUDIO
LOW POWER
CABLE
STB
MARK
U
MEN
- This is the function to reduce the power consumption of the set.
- It’s not available to use this function in LCD TV models.
TIME MACHINE
OK
TIME
SHIFT
TIME
SHIFT
PIP P
1
2
3
4
Press the MENU button and then use D /
select the SPECIAL menu.
Press the G button and then use D /
Low power.
E
Press the G button and then use D /
On or Off.
E
E
LIVE
TV
EXIT
R-
PIP PR +
SWAP
PIP IN
PUT
STATIONO Language
PICTUREO Child lock
button to
SOUNDO ISM Method
TIMEO Low power
SPECIAL{ Set ID
SCREENO
Demo
PIP/DWO
button to select
DVRO
button to select
Move
MENU
Menu
1
Press the E X I T button to return to normal TV viewing.
Language
Child lock
ISM Method
Low Power
power
G
Set ID
On
Off
Demo
2 3
- Use it to see the difference between XD Demo on and XD
Demo off.
- It’s not available to use this function in RGB[PC], HDMI[PC]
mode.
TV MENU
DEMO
Language
Child lock
ISM Method
Low Power
Set ID
Demo
1
Press the MENU button and then use D /
select the SPECIAL menu.
2
Press the G button and then use D /
XD Demo.
3
Press the G button to begin XD Demo.
4
To stop XD Demo, press the MENU or EXIT button.
E
E
G
To Start
button to
button to select
2 3
73
TV MENU
Special Menu Options
INDEX (OPTION)
AUDIO
CABLE
MARK
- You can switch FRONT DISPLAY on or off.
U
MEN
TIME MACHINE
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
1
2
3
Press the G button and then use D /
Index.
E
Press the G button and then use D /
On or Off.
E
PUT
PR
MUTE
Press the MENU button and then use D /
select the SPECIAL menu.
PIP IN
TEXT
STATIONO Language
PICTUREO Child lock
E button to
SOUNDO ISM Method
TIMEO Low power
SPECIAL{ Set ID
SCREENO
Demo
PIP/DWO Index
button to select
DVRO
Move
button to select
MENU
Menu
1
Language
TV MENU
When you select On mode, The FRONT DISPLAY illuminates
brightly.
Child lock
ISM Method
Low power
Set ID
Demo
4
Press the E X I T button to return to normal TV viewing.
Index
G
On
Off
2 3
74
TV MENU
Screen Menu Options
AUTO CONFIG.
CABLE
AUDIO
STB
MARK
- Automatically adjusts picture position and minimizes image
shaking.
- Although the image is still not correct, your set is functioning
properly but needs further adjustment.
- The Auto config. functions don’t need to be run for
HDMI/DVI mode.
- This function works in the following mode : RGB[PC]
- This function is for the automatic adjustment of the screen
position, clock, and phase. The displayed image will disappear
for a few seconds while the auto configuration is in progress.
U
MEN
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
PIP IN
VOL
PUT
PR
MUTE
TEXT
STATIONO Auto config.
PICTUREO Manual config.
SOUNDO XGA Mode
TIMEO ARC
1
SPECIALO Cinema
Press the MENU button and then use D / E button to
select the SCREEN menu.
SCREEN{ NR
PIP/DWO Reset
DVRO
2
Press the G button and then use D / E button to select
Auto config.
3
Press the G button to start Auto config..
Move
MENU
Menu
1
G
To set
XGA Mode
ARC
Cinema
NR
TV MENU
• When Auto config. has finished, OK will be shown on screen.
• If the position of the image is still not correct, try Auto
adjustment again.
Auto config.
Manual config.
Reset
4
If picture needs to be adjusted more after Auto adjustment
in RGB (PC), you can adjust the Manual config..
5
Press the E X I T button to return to normal TV viewing.
2 3 4
75
TV MENU
Screen Menu Options
MANUAL CONFIG.
CABLE
AUDIO
MARK
- If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
- To correct the screen size, adjust Clock.
- This function works in the following mode:
RGB[PC], RGB[DTV], HDMI[DTV], COMPONENT[DTV]
mode only
- It’s not available to use Phase, Clock function in RGB[DTV],
HDMI[DTV], COMPONENT[DTV] mode.
TIME MACHINE
U
MEN
STB
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
PIP IN
PUT
PR
MUTE
TEXT
Mini Glossary
C l o c k This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also change.
STATIONO Auto config.
PICTUREO Manual config.
P h a s e This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
SOUNDO XGA Mode
TIMEO ARC
SPECIALO Cinema
SCREEN{ NR
PIP/DWO Reset
DVRO
Move
MENU
Menu
1
1
TV MENU
76
2
Press the MENU button and then D / E button to select
the SCREEN menu.
Press the G button and then D / E button to select
Manual config..
3
Press the G button and then D / E button to select Phase,
Clock, H-Position or V-Position.
4
Press the F / G button to make appropriate adjustments.
5
Press the E X I T button to return to normal TV viewing.
Auto config.
Manual config.
Phase
0
XGA Mode
Clock
0
ARC
H-Position
0
Cinema
V-Position
0
G
NR
Reset
2 3 4
SELECTING WIDE XGA/VGA MODE
CABLE
AUDIO
STB
MARK
- To see a normal picture, match the resolution of RGB mode
and selection of VGA/XGA mode.
- In some models, it’s not available for selecting VGA mode.
- This function works in the following mode : RGB[PC]
TIME MACHINE
U
MEN
LIVE
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
Press the MENU button and then use D /
select the SCREEN menu.
E
PIP IN
PUT
PR
MUTE
1
TV
EXIT
TEXT
STATIONO Auto config.
PICTUREO Manual config.
button to
SOUNDO XGA Mode
TIMEO ARC
SPECIALO Cinema
2
3
E
Press the G button and then use D /
the desired XGA/VGA resolution.
E
SCREEN{ NR
button to select
PIP/DWO Reset
DVRO
button to select
Press the E X I T button to return to normal TV viewing.
Move
MENU
Menu
1
Auto config.
Manual config.
XGA Mode
G
TV MENU
4
Press the G button and then use D /
XGA Mode (VGA Mode).
1024x768
ARC
1280x768
Cinema
1360x768
NR
1366x768
Reset
2 3
77
TV MENU
Screen Menu Options
SETTING PICTURE FORMAT
CABLE
AUDIO
STB
MARK
- You can watch the screen in various picture formats; Spectacle,
Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom.
- If a fixed image is displayed on the screen for a long time,
that fixed image may become imprinted on the screen and
remain visible.
- You can only select 4:3 and 16:9 (Wide) in RGB[PC], HDMI[PC]
mode only.
- You can only select 4:3, 16:9 (Wide) and Zoom in RGB[DTV],
HDMI[DTV], Component [DTV] mode only.
- You can only select Spectacle, Full, 4:3, 16:9 (Wide), 14:9
and Zoom in Component [480i/576i] mode only.
- It might be uncomfortable in full mode. Then change into
other mode.
- You can adjust the enlarge proportion using D / E button.
- This function works in the following signal.
1
Press the MENU button and then D / E button to select
the SCREEN menu.
2
3
Press the G button and then use D / E button to select ARC.
U
MEN
TV MENU
• 4:3
Following selection will lead you to view a picture with an
original 4:3 aspect ratio, with gray bars appearing at both
the left and right sides.
• 16:9 (Wide)
Following selection will lead you to adjust the picture
horizontally, in a linear proportion, to fill the entire
screen (useful for viewing 4:3 formatted DVDs).
• 14:9
You can enjoy the picture format of 14:9 or general set
programme through the 14:9 mode.
The screen 14:9 is viewed just like that the screen 4:3 is
magnified to the left / right.
• Zoom
Following selection will lead you to view the picture without
any alternation, while filling the entire screen. However, the
top and bottom portions of the picture will be cropped.
4
78
Press the E X I T button to return to normal TV viewing.
TV
OK
PIP P
R-
TIME
SHIFT
PIP PR +
SWAP
VOL
PIP IN
PUT
PR
MUTE
TEXT
STATIONO Auto config.
PICTUREO Manual config.
SOUNDO XGA Mode
TIMEO ARC
SPECIALO Cinema
SCREEN{ NR
PIP/DWO Reset
• Spectacle
When your set receives the wide screen signal, when selected
it will adjust the picture horizontally, in non-linear proportion,
to fill the entire screen.
• Original
When your set receives the wide screen signal, it will be
automatically changed to the picture format to be sent.
LIVE
EXIT
TIME
SHIFT
Press the G button and then use D / E button to select
Spectacle, Full (option), Original, 4:3, 16:9 (Wide),
14:9 or Zoom.
• Full (option)
When your set receives the wide screen signal, when selected it
will adjust the picture horizontally or vertically, in a linear pro
portion, to fill the entire screen fully.
TIME MACHINE
DVRO
Move
MENU
Menu
1
Auto config.
Manual config.
XGA Mode
ARC
G
Spectacle
Cinema
Full
NR
Original
Reset
4:3
16:9
14:9
Zoom
2 3
CINEMA
CABLE
AUDIO
STB
MARK
- When you watch the movie, this function adjusts the set to
the best picture appearance.
- This function works in the following mode: TV, AV1, AV2
or COMPONENT (480i/576i).
TIME MACHINE
U
MEN
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
SWAP
VOL
Press the MENU button and then D /
the SCREEN menu.
E
PUT
PR
MUTE
1
PIP IN
TEXT
STATIONO Auto config.
PICTUREO Manual config.
button to select
SOUNDO XGA Mode
TIMEO ARC
SPECIALO Cinema
2
3
E
Press the G button and then use D /
On or Off.
E
SCREEN{ NR
button to select
PIP/DWO Reset
DVRO
button to select
Press the E X I T button to return to normal TV viewing.
Move
MENU
Menu
1
Auto config.
Manual config.
TV MENU
4
Press the G button and then use D /
Cinema.
XGA Mode
ARC
Cinema
NR
G
On
Off
Reset
2 3
79
TV MENU
Screen Menu Options
NR (NOISE REDUCTION)
CABLE
AUDIO
STB
MARK
- You can select 3D NR or MPEG NR to reduce the picture
noise which may appear on the screen during watching the set.
- This function is not available for use in RGB[PC], HDMI[PC]
mode.
- 3D NR is not available for use in RGB, HDMI and
Component[DTV] mode.
1
Press the MENU button and then use D /
select the SCREEN menu.
E
TIME MACHINE
U
MEN
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
R-
PIP PR +
PIP IN
SWAP
PUT
STATIONO Auto config.
PICTUREO Manual config.
button to
SOUNDO XGA Mode
TIMEO ARC
SPECIALO Cinema
2
Press the G button and then use D /
3
Press the G button and then use D /
3D NR or MPEG NR.
E
E
PIP/DWO Reset
DVRO
button to select
Move
MENU
Menu
1
button to make appropriate adjustments.
4
Press the F /
5
Press the E X I T button to return to normal TV viewing.
G
SCREEN{ NR
button to select NR.
Auto config.
Manual config.
XGA Mode
ARC
Cinema
NR
G
Reset
3D NR
0
MPEG NR
0
TV MENU
2 3 4
INITIALIZING
(RESET TO ORIGINAL FACTORY SETTINGS)
- This function operates in current mode.
- To initialize the adjusted values.
U
MEN
TIME MACHINE
LIVE
TV
EXIT
OK
TIME
SHIFT
TIME
SHIFT
1
Press the MENU button and then use D /
select the SCREEN menu.
2
Press the G button and then D /
3
Press the G button.
E
MARK
E
button to
button to select Reset.
• You can initialize Phase, Clock, H-Position, V-Position,
Position, Win. size, Win. position, PIP Transparency and
sub picture size of twin picture.
PIP P
R-
PIP PR +
SWAP
PIP IN
PUT
Auto config.
Manual config.
XGA Mode
ARC
Cinema
NR
Reset
G
To set
2 3
80
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
- Connect the RS-232C input jack to an external control device (such as a computer or an
A/V control system) and control the set’s functions externally.
How to connect external control equipment
• Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
• RS-232C connection cables are not supplied with the set.
• The set remote control and front panel controls (except main power) will not be functional if
the Monitor is controlled by a PC computer or other external device.
RS-232C Setup
RGB IN
HDMI/
DVI IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
RS-232C IN
(CONTROL
& SERVICE)
REMOTE
CONTROL IN
RGB IN
(PC/DTV)
HDMI/DVI IN
VARIABLE
AUDIO OUT
UPGRADE
(MODULE)
Type of Connector; D-Sub 9-Pin Male
RS-232C IN
(CONTROL & SERVICE)
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
APPENDIX
No.
1
2
3
4
5
6
7
8
9
5
6
9
81
APPENDIX
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
3-Wire Configurations(Not standard)
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
E TV
Set ID
U
MEN
TIME MACHINE
EXIT
OK
TIME
SHIFT
TIME
SHIFT
PIP P
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping 1’. See page 86.
APPENDIX
Press the MENU button and then use the D /
button to select the SPECIAL menu.
2
Press the G button and then use D /
select Set ID.
3
Press the G button and then use F / G button to
adjust Set ID to choose the desired monitor ID
number.
4
82
PUT
SPECIAL{ Set ID
SCREENO
Demo
PIP/DWO
button to
DVRO
Move
MENU
Menu
1
Language
Child lock
• The adjustment range of Set ID is 1 ~ 99.
ISM Method
Press the EXIT button to return to normal TV viewing.
Set ID
Baud rate : 9600 bps (UART)
■ Data length : 8 bits
■ Parity : None
PIP IN
SWAP
SOUNDO ISM Method
TIMEO Low Power
E
Low Power
G
1
Demo
2 3
Communication Parameters
■
PIP PR +
STATIONO Language
PICTUREO Child lock
1
E
R-
Use a crossed (reverse) cable.
■ Stop bit : 1 bit
■ Communication code : ASCII code
■
Command Reference List
* When setting the 24 ~ 34, a menu doesn’t display on screen.
COMMAND1 COMMAND2
DATA
(Hexadecimal)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
0~1
18. Balance
b
0~6
19. Colour Temperature(CSM) k
u
0~3
c
Refer to p.84
20. Red Adjustment
k
v
0 ~ 50
21. Green Adjustment
k
w
0 ~ 50
22. Blue Adjustment
k
$
0 ~ 50
01. Power
k
a
02. Input Select
k
03. Aspect Ratio
k
04. Screen Mute
k
d
0~1
05. Volume Mute
k
e
0~1
k
t
0 ~ 64
06. Volume Control
k
f
0 ~ 64
23. PIP input Source
k
y
0~6
07. Contrast
k
g
0 ~ 64
24. Abnormal Status
k
z
0~9
08. Brightness
k
h
0 ~ 64
25. ISM Method (option) j
p
0~3
09. Colour
k
i
0 ~ 64
26. Low Power (option)
q
0~1
j
10. Tint (option)
k
j
0 ~ 64
27. Orbiter Time Setting (option) j
r
1 ~ FE
11. Sharpness
k
k
0 ~ 64
28. Orbiter Pixel Setting (option) j
s
1~3
12. OSD Select
k
l
0~1
29. Picture Size (option)
j
t
0 ~ 20
13. Remote Control
k
m
0~1
30. Auto Configure (option) j
u
1
31. Programme selection
m
a
0 ~ 63
14. PIP/DW
k
n
Refer to p.85
32. Send IR Code
m
c
Key Code
15. PIP Position
k
q
0~3
33. Input select (Main)
x
b
Refer to p.87
16. Treble
k
r
0 ~ 64
34. Input select (PIP)
x
y
Refer to p.87
17. Bass
k
s
0 ~ 64
Lock Mode
Transmission / Receiving Protocol
OK Acknowledgement
Transmission
[Command 1]
[Command 2]
[Set ID]
* [DATA]
* [Cr]
* [ ]
: First command to control set. (j, k, m or x)
: Second command to control set.
: You can adjust the set ID to choose
desired set ID number in special menu.
Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every
connected set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63) on
transmission/receiving protocol.
: To transmit command data.
Transmit ‘FF’ data to read status of
command.
: Carriage Return
ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgement) based on this
format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data
is data write mode, it returns the data of the PC computer.
APPENDIX
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this
format when receiving abnormal data from non-viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
83
APPENDIX
01. Power (Command2:a)
To control Power On/Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
Data 1 : Power On
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
02. Input Select (Command 2 : b)
To select input source for the set.
You can also select an input source using the INPUT
SELECT button on the set's remote control.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Date 0: TV
Date 4: Component2
Date 1: AV1
Date 5: RGB
Date 2: AV2
Date 6: HDMI/DVI
Date 3: Component1
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]
03. Aspect Ratio (Command2:c) (Main picture size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or
in the SCREEN menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Date 1: Normal screen (4:3)
Date 6: Original
Date 2: Wide screen (16:9)
Date 7: 14:9
Date 3: Horizon (Spectacle)
Date 8: Full (option)
Date 4: Zoom
APPENDIX
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 8 . Brightness (Command2:h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
09. Colour (Command2:i)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j) (option)
0 4 . Screen Mute (Command2:d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
84
0 6 . Volume Control (Command2:f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 86.
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off when controlling remotely.
18. Balance (Command2:t)
To adjust balance.
You can also adjust balance in the SOUND menu.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Data 1: OSD on
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [t][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel
controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off
Data 1: Lock on
Acknowledgement [m][ ][Set ID][ ][OK][Data][x]
If you’re not using the remote control and front panel
controls on the set, use this mode. When main power
is on/off, remote control lock is released.
14. PIP / DW (Command2:n)
To control the PIP (Picture In picture)/DW.
You can also control the PIP/DW using the PIP button on the remote control or in the PIP/DW menu.
Transmission [k][n][ ][Set ID][ ][Data][Cr]
Data 0:PIP/DW off
Data 1: PIP
Data2: DW1
Data3: DW2
Data5: POP
Acknowledgement [n][ ][Set ID][ ][OK][Data][x]
15. PIP Position (Command2:q)
To select sub picture position for PIP.
You can also adjust the sub picture position using
POSITION button on the remote control or in the
PIP/DW menu.
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
16. Treble (Command 2 :r)
To adjust treble.
You can also adjust treble in the SOUND menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
17. Bass (Command 2 : s)
To adjust bass.
You can also adjust bass in the SOUND menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Normal 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
2 0 . Red Adjustment (Command2:v)
To adjust red in colour temperature.
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 86.
Acknowledgement [v][ ][Set ID][ ][OK][Data][x]
2 1 . Green Adjustment (Command2:w)
To adjust red in colour temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 86.
Acknowledgement [w][ ][Set ID][ ][OK][Data][x]
2 2 . Blue Adjustment (Command2:$)
To adjust red in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 86.
Acknowledgement [$][ ][Set ID][ ][OK][Data][x]
APPENDIX
Transmission [k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen
Data 1: Left down on screen
Data 2: Left up on screen
Data 3: Right up on screen
19. Colour Temperature (Command2:u)
To adjust colour temperature.
You can also adjust CSM in the PICTURE menu.
23. PIP Input Select (Command 2 : y)
To select input source for sub picture in PIP/DW picture
mode. You can also adjust input source for sub picture
using PIP INPUT button on remote control.
Transmission [k][y][ ][Set ID][ ][Data][Cr]
Date 0: TV
Date 1: AV1
Date 2: AV2
Date 3: Component1
Date 4: Component2
Date 5: RGB
Date 6: HDMI/DVI
Acknowledgement [y][ ][Set ID][ ][OK][Data][x]
Acknowledgement [s][ ][Set ID][ ][OK][Data][x]
85
APPENDIX
2 4 . Abnormal State (Command2:z)
To recognize an abnormal state.
This feature is not available for all models.
Transmission [k][z][ ][Set ID][ ][Data][ ][Cr]
Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
Data 1: No signal (Power on)
Data 2: Turn the set off by remote control
Data 3: Turn the set off by sleep time function
Data 4: Turn the set off by RS-232C function
Data 5: 5V down
Data 6: AC down
Data 7: Turn the set off by Fan Alarm function (option)
Data 8: Turn the set off by Off time function
Data 9: Turn the set off by Auto sleep function
* This function is “read only”.
2 5 . ISM Method (Command1:j, Command2:p) (option)
To control the ISM method. You can also adjust ISM
Method in SPECIAL menu.
This feature is not available for all models.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal
Data2: Orbiter
Data 1: White Wash
Data3: Inversion
Acknowledgement [p][ ][Set ID][ ][OK][Data][x]
2 6 . Low power (Command1:j, Command2:q) (option)
To reduce the power consumption of the monitor.
You can also adjust Low power in SPECIAL menu.
This feature is not available for all models.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data 0: Off
Data 1: On
APPENDIX
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
2 7 . Orbiter Time Setting (Command1:j, Command2:r) (option)
To adjust orbiter operation time term.
This feature is not available for all models.
Transmission [j][r][ ][Set ID][ ][Data][ ][Cr]
Data Min: 1 ~ Max: FE
Refer to ‘Real data mapping 1’.
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
2 8 . Orbiter Pixel Setting (Command1:j, Command2:s) ( o p t i o n )
To adjust pixel number in orbiter function.
This feature is not available for all models.
Transmission [j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 3
Refer to ‘Real data mapping 1’.
Acknowledgement [s][ ][Set ID][ ][OK][Data][x]
86
29. Picture Size Setting for Twin Picture Mode
(Command 1 : j, Command 2 : t) (option)
To adjust pixel number in orbiter function.
This feature is not available for all models.
Transmission [j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 20
Refer to ‘Real data mapping 1’.
Acknowledgement [t][ ][Set ID][ ][OK][Data][x]
30 . Auto Configure (Command1:j, Command2:u) (option)
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
3 1 . Programme selection (Command1:m, Command2:a)
To select a programme for the main picture.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data 0: Min: 0 ~ Max: 63 (0 ~ C7, 200Pr is on)
Refer to ‘Real data mapping 1’.
Data 1: Don’t care
Data 2: 0 : Main
1 : Sub
Acknowledgement [a][ ][Set ID][ ][OK][Data0][x]
* Real data mapping 1
0 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
FE : Step 254
FF : Step 255
* Real data mapping 2
0 : -40
1 : -39
2 : -38
28 : 0
4E : +38
4F : +39
50 : +40
3 2 . S e n d I R C o d e (Command1:m, Command2:c)
34. Input select (Command1:x, Command2:y)
To send IR remote key code.
To adjust input source for sub picture in PIP mode
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Transmission [x][y][ ][Set ID][ ][Data][Cr]
Data: Structure
Data: Key code - Refer to page 89.
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
MSB
0
3 3 . Input select (Command1:x, Command2:b)
(Main Picture Input)
To select input source for set
0
0
0
External Input
0
0
0
0
0
0
0
Data
0
0
1
Analog
LSB
0
0
1
0
AV
0
0
1
0
0
Component
0
1
0
1
RGB-DTV
0
1
1
0
RGB-PC
1
0
0
1
HDMI/DVI
Data
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
0
1
RGB-DTV
0
1
1
0
RGB-PC
0
0
0
0
Input1
1
0
0
1
HDMI/DVI
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Input Number
0
Input Number
0
Input Number
External Input
0
External Input
Data: Structure
0
0
External Input
Transmission [x][b][ ][Set ID][ ][Data][Cr]
MSB
LSB
Input Number
Data
Data
0
0
0
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [y][ ][Set ID][ ][OK][Data][x]
APPENDIX
Input1
0
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]
87
APPENDIX
IR CODES
1. How to Connect
■
Connect your wired remote control to the Remote Control port on the set.
2. Remote Control IR Codes (NEC Format)
■
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
■
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
■
Tf
Lead code
9 ms
4.5 ms
APPENDIX
■
Repeat code
0.55 ms
9 ms
■
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
1.12 ms
■
2.24 ms
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
88
REMOTE CONTROL IR CODES
(Hexa)
Code
Function
Note
Code
Function
00
PR D
R/C Button
1A
Q.VIEW
01
02
PR E
R/C Button
0A
I/II
R/C Button
VOL D
R/C Button
0E
SLEEP
R/C Button
03
VOL E
R/C Button
43
MENU
R/C Button
40
D
R/C Button
44
OK(
41
E
R/C Button
4D
PSM
R/C Button
06
G
R/C Button
52
SSM
R/C Button
07
F
R/C Button
53
LIST
R/C Button
08
POWER
R/C Button (Power On/Off)
20
TEXT
R/C Button
C4
POWER ON
Discrete IR Code (Only Power On)
2A
REVEAL
R/C Button
C5
POWER OFF
Discrete IR Code (Only Power Off)
22
MODE
R/C Button
09
MUTE
R/C Button
24
MIX
R/C Button
10
Number Key 0
R/C Button
26
TIME
R/C Button
11
Number Key 1
R/C Button
62
UPDATE / POSITION R/C Button
12
Number Key 2
R/C Button
64
SIZE
R/C Button
13
Number Key 3
R/C Button
65
HOLD
R/C Button
14
Number Key 4
R/C Button
70
INDEX
R/C Button
15
Number Key 5
R/C Button
60
PIP
R/C Button
16
Number Key 6
R/C Button
61
PIP INPUT
R/C Button
17
Number Key 7
R/C Button
63
SWAP
R/C Button
18
Number Key 8
R/C Button
71
PIP PR+
R/C Button
19
Number Key 9
R/C Button
72
PIP PR-
R/C Button
0B
INPUT
R/C Button
79
ARC
R/C Button
98
MULTIMEDIA
R/C Button
76
ARC (4:3)
Discrete IR Code (Only 4:3 mode)
BF
COMPONENT
Discrete IR Code
77
ARC (16:9)
Discrete IR Code (Only 16:9 mode)
(Input COMPONENT Selection)
AF
ARC (Zoom)
Discrete IR Code (Only Zoom mode)
(Hexa)
)
Note
R/C Button
R/C Button
HDMI
Discrete IR Code (Input HDMI Selection) B5
MARK
R/C Button
D5
RGB
Discrete IR Code (Input RGB Selection) B0
PLAY
R/C Button
D6
TV
Discrete IR Code (Input TV Selection) B1
STOP
R/C Button
5A
AV1
Discrete IR Code (Input AV1 Selection) BA
PAUSE
R/C Button
D0
AV2
Discrete IR Code (Input AV2 Selection)
1E
FAV (Favorite)
R/C Button
APPENDIX
C6
89
APPENDIX
PROGRAMMING THE REMOTE
The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
APPENDIX
90
1
To find out whether your remote can operate the device without programming, turn on the device such as
a VCR and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off then it responds properly and the remote
need not to be programmed. If not, the remote should be programmed to operate the device. The pro
gramming procedures are explained below.
2
Press the MENU and MUTE button continuously at the same time for 2 seconds, the current selected
device button will be illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,
you have to repeat from step 2.
3
Enter code numbers using the number button on the remote by referring the code table on the following
pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is
successful.
4
Press the MENU button to store the code. After blinking twice, this code is stored.
5
Test the remote functions to see if the device responds properly. If not, repeat from step 2.
PROGRAMMING CODES
VCRs
Brand
AIWA
AKAI
Codes
Codes
Brand
MAGNAVOX
031
067
012
069
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
SAMSUNG
043 046 124
146
MARANTZ
033
023
037
031
103
039 043
129
033
MARTA
MATSUI
MEI
MEMOREX
040
033
007
108
116
135
041
010 064
110 111
117 119
MGA
MINOLTA
MITSUBISHI
023 039 043
053
017
031
037
131
008
025
034
046
138
009
033
109
136
012
018
063
033
033
013
066
063 072
144 147
031
050
150
034
048
012
106
027
035
101
153
010
045
026 034
137 150
015 033
101
033 043
055 060
152
039 043
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
REALISTIC
013 020
114 123
009 013 014
034 101 106
RICO
RUNCO
SALORA
013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014
033 034 041
068
031 033 067
030
033
010
034
102
046
020
020
051
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
Codes
032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
APPENDIX
034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040
Brand
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
91
APPENDIX
PROGRAMMING CODES
CATV
Brand
ABC
Codes
003
046
AJIN
112
ANTRONIK
014
ARCHER
005
CABLE STAR
026
CENTURION
092
CENTURY
007
CITIZEN
007
COLOUR VOICE 065
COMBANO
080
COMTRONICS
019
DIAMOND
023
EAGLE
020
EASTERN
057
ELECTRICORD
032
GE
072
GEMINI
008
GI
052
GOLDEN CHANNEL 030
HAMLIN
049
HITACHI
052
HOSPITALITY
070
JERROLD
002
009
074
APPENDIX
92
004 039 042
052 053
007 014 024
090
081
030
030 040
062 066
022 025 054
074
050 055
055
077
003 004 008
010 052 069
Brand
LG (GOLDSTAR)
M-NET
MACOM
MAGNAVOX
MEMOREX
MOVIE TIME
NSC
Codes
001
037
033
010
100
028
015
073
OAK
016
PANASONIC
044
PARAGON
100
PHILIPS
006
065
PIONEER
034
076
POST NEWS WEEK 016
PRUCER
059
PTS
011
073
PULSAR
100
RCA
047
REGAL
049
REGENCY
057
REMBRANT
025
SAMSUNG
102
SCIENTIFIC ATLANTA 003
043
106 101 005
012 064 079
032
028 038 071
031 037 053
047
012 013 020
085 090
051 052 063
048 071 072
074
Brand
Codes
SHERITECH
SIGNAL
SIGNATURE
SL MARX
SPRUCER
STARCOM
STARGATE
TADIRAN
TAEKWANG
TAIHAN
TANDY
TEXSCAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
022
030
052
030
047
002
008
030
110
105
017
029
039
100
007
004
005
026
012
087
100
VIEWSTAR
ZENITH
050
107 030 068
011 041 042
045 046
078
004 008 009
030
040 056
014
053
007
027
015
088
114
024
014
032
018
089
060
024
035
086
093
HDSTB
Brand
Codes
ALPHASTAR DSR
AMPLICA
BIRDVIEW
CHANNEL MASTER
123
050
051
013
036
CHAPARRAL
008
CITOH
054
CURTIS MATHES 050
DRAKE
005
011
141
DX ANTENNA
024
ECHOSTAR
038
093
097
122
ELECTRO HOME 089
EUROPLUS
114
FUJITSU
017
133
GENERAL INSTRUMENT 003
031
HITACHI
139
Brand
126 129
014 015 018
055
009 012 077
145
006 007 010
052 112 116
046
040
094
098
056
057
095
099
076
058
096
100
021 022 027
134
004 016 029
059 101
140
Codes
HOUSTON TRACKER 033
057
HUGHES
068
JANIEL
060
JERROLD
061
KATHREIN
108
LEGEND
057
LG
001
LUTRON
132
LUXOR
062
MACOM
010
065
MEMOREX
057
NEXTWAVE
028
NORSAT
069
PACE SKY SATELLITE 143
PANASONIC
060
PANSAT
121
PERSONAL CABLE 117
PHILIPS
071
PICO
105
PRESIDENT
019
PRIMESTAR
030
037 039 051
104
147
144
059 063 064
124 125
070
142
102
110 111
Brand
Codes
PROSAT
072
RCA
066
REALISTIC
043
SAMSUNG
123
SATELLITE SERVICE CO 028
085
SCIENTIFIC ATLANTA 032
SONY
103
STARCAST
041
SUPER GUIDE
020
TEECOM
023
088
137
TOSHIBA
002
UNIDEN
016
044
078
101
VIEWSTAR
115
WINEGARD
128
ZENITH
081
091
106
074
035 047 057
138
124 125
026 075 087
090 107 130
127
025
045
079
135
042 043
048 049
080 086
136
146
082 083 084
120
APPENDIX
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
017
009
026
006
015
006
008
018
016 025
006
93
APPENDIX
PROGRAMMING CODES
Audio
Brand
AIWA
APPENDIX
94
Codes
014
125
230
AKAI
163
ANAM
003
059
217
BURMECTER
252
CARVER
086
CLARION
199
DAEWOO
027
102
DENON
015
FANTASIA
071
FINEARTS
022
FISHER
089
LG(GOLDSTAR) 001
087
190
211
HAITAI
034
HARMAN/KARDON 068
INKEL
037
078
122
152
157
189
225
247
JVC
004
KEC
185
KENWOOD
038
170
215
KOHEL
030
028 070 096
129 139 229
Brand
Codes
NAD
LOTTE
045
014
100
175
179
201
214
238
103
111
002
034
097
049
104
107
046
013
048
133
158
007
142
104
026
039
065
115
113
080
092
103
124
193
204
011
014 017 023
106 189 216
235 236
053 060 084
148 198 221
075 130 143
099
021
107
191
212
035
024
108
192
239
188
029
110
210
222
058
079
149
153
158
207
226
062
095
150
154
159
222
227
069
121
151
155
160
224
243
013
186
050
171
222
141
187
067 089
197 206
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
NAD
ONKYO
OPTIMUS
PANASONIC
PENNEY
PHILIPS
PIONEER
QUASAR
RCA
RCX
REALISTIC
SAMSUNG
SANSUI
046
016
172
176
180
202
219
240
036
173
177
181
208
223
098
174
178
183
213
232
Brand
Codes
SANYO
SCOTT
SHARP
019
106
031
072
156
206
005
044
118
012
076
162
166
205
010
185
101
147
137
061
088
089
054
199
SHERWOOD
SONY
TAEKWANG
018 020 025
041 081 090
112
TEAC
TECHNICS
040 041 047
056 057 132
140
033 064 113
220 241 251
112
042
091
123
143
043 063
093 094
127 250
106
145
194
244
135
146
195
245
138
182
203
246
144
TOSHIBA
THE
VICTOR
WARDS
YAMAHA
083
186
032
082
184
209
006
045
126
020
077
163
167
231
085
187
113
218
234
051 052
117 119
199 200
158
109
248
073
105
164
168
233
106
237
128
114
249
074
161
165
169
242
136
134
131
055 066 092
TROUBLESHOOTING CHECKLIST
The operation does not work normally.
Check to see if there is any object between the set and the remote co
trol causing obstruction.
■ Are batteries installed with correct polarity (+ to +, - to -)?
■ Correct remote operating mode set: TV, VCR etc.?
■ Install new batteries.
■
The remote control
doesn’t work
Is the sleep timer set?
■ Check the power control settings. Power interrupted.
■ No broadcast on station tuned with Auto off activated.
■
Power is suddenly
turned off
The operation does not work normally.
Check whether the set is turned on.
■ Try another programme. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another set’s power cord into the outlet where
the set’s power cord was plugged in.
■
No picture & No sound
Picture appears slowly
after switching on
■
This is normal, the image is muted during the set startup process. Please contact
your service center, if the picture has not appeared after five minutes.
■
No or poor colour
or poor picture
Horizontal/vertical bars
or picture shaking
■
APPENDIX
Adjust Colour in menu option.
Keep a sufficient distance between the set and the VCR.
■ Try another programme. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
Check for local interference such as an electrical appliance or power tool.
Station or cable set experiencing problems, tune to another station.
■ Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks
in pictures
■
Check antenna (Change the direction of the antenna).
95
APPENDIX
TROUBLESHOOTING CHECKLIST
The audio function does not work.
Press the VOL D / E button.
Sound muted? Press MUTE button.
■ Try another programme. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
■
Picture OK & No sound
No output from one
of the speakers
Unusual sound from
inside
the set
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the set is turned on or off and does not indicate a fault with the set.
There is a problem in PC mode. (Only PC mode applied)
■
Adjust resolution, horizontal frequency, or vertical frequency.
■
Check the input source.
■
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
■
Check the signal cable.
Reinstall the PC video card.
The signal is out of range
APPENDIX
96
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
■
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will
have your new set. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your set.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry and lint-free cloth.
■ Please be sure not to use a wet cloth.
■
Extended Absence
CAUTION
If you expect to leave your set dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
APPENDIX
97
APPENDIX
PRODUCT SPECIFICATIONS
42PC1RR*
50PB2RR*
42PC1RR-TL
50PB2RR-TL
1129.0 x 748.5 x 380.0 mm
1382 x 913 x 377 mm
44.5 x 29.5 x 15.0 inches
54.4 x 36.0 x 14.9 inches
1129.0 x 695.0 x 108.9 mm
44.5 x 27.4 x 4.3 inches
54.4 x 33.4 x 4.9 inches
MODELS
with stand
Dimensions
(Width x Height x Depth)
without stand
Weight
including stand
excluding stand
Power requirement
Power consumption
Television System
External Antenna Impedance
Environment condition
APPENDIX
98
62.2 kg/137.1 lbs
49.2 kg/108.5 lbs
AC100-240V~ 50/60Hz
310 W
450W
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
75 Ω
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
■
29.1kg/64.2 lbs
25.6kg/56.5 lbs
1382 x 848.5x 125 mm
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
PRODUCT SPECIFICATIONS
37LC2RR*
42LC2R**
42LC2RR
37LC2RR-TL
42LC2R-ZH
42LC2RR-TL
944.0 x 729 x 286 mm
37.1 x 28.7 x 11.2 inches
1054 x 813 x286 mm
41.4 x 32x 11.2 inches
944.0 x 659.3 x 129.7 mm
37.1 x 26 x 5.1 inches
1054 x 746 x 136.8mm
41.4 x 29.3 x 5.3 inches
30.4 kg/67.0 lbs
25.9 kg /57.1 lbs
42.3kg/93.2 lbs
35.7kg/78.7 lbs
MODELS
with stand
Dimensions
(Width x Height x Depth)
without stand
Weight
including stand
excluding stand
Power requirement
Power consumption
Television System
External Antenna Impedance
Environment condition
AC100-240V~ 50/60Hz
200W
250W
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
75 Ω
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
■
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
99
Download PDF

advertising