LG | 42PQ60R | LG 42PQ10R Owner’s Manual

ENGLISH
PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
42PQ1***
50PQ1***
42PQ3***
50PQ3***
50PS4***
60PS4***
42PQ6***
50PQ6***
42PS6***
50PS6***
42PQ7***
50PQ7***
50PS8***
60PS8***
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record the model number and serial number of the
TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring any service.
ACCESSORIES
■
Here shown may differ from your TV
Owner’s Manual
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
Power Cord
Batteries
RATIO POWER
ENERGY SAVING
SLEEP
POWER
RATIO
Q. MENU MENU
INPUT
OK
1
2
3
4
5
6
7
RETURN
AV MODE
LIST
This item is not included for all models.
ENERGY SAVING
AV MODE
8
9
0
Q.VIEW
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
MUTE
MARK
FAV
P
A
G
E
or
P
P
A
G
E
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q. VIEW
OK
MENU
RETURN
FAV
Q.MENU FREEZE
MARK
Polishing Cloth
Polishing cloth for use on
the screen.
FREEZE
Do not use excessive force. This may cause
scratching or discolouration.
Remote Control
x2
Cable Holder
(Refer to P. 10)
Cable Management Clip
(only 50/60PS4***, 42/50PQ7***,
50/60PS8***)
(Refer to P. 10)
Wall Mounting Bracket
(Separate purchase)
AW-50PG60MS
x4
or
Protection cover
(Refer to p.11)
Bolts for stand assembly
(Refer to P.8)
(Except 60PS4***,
60PS8***)
Ferrite Core
(This item is not included for all
models.)
(Only 60PS4***, 60PS8***)
AW-60PG60MS
1
CONTENTS
ACCESSORIES.......................................................1
PREPARATION
CONTENTS
Front Panel Controls................................................. 4
Back Panel Information ............................................ 7
Stand Installation....................................................... 8
Careful installation advice.........................................9
Back Cover for Wire Arrangement....................... 10
Swivel Stand ..............................................................11
Not using the desk-type stand ..............................11
Desktop Pedestal Installation.................................12
Wall Mount: Horizontal installation ......................12
ANTENNA CONNECTION.....................................13
Input LABEL....................................................................46
AV Mode .........................................................................47
key Lock...........................................................................48
Initializing (Reset to original factory settings) .....49
TO USE THE BLUETOOTH
Bluetooth? .....................................................................50
Setting the Bluetooth ..................................................51
Set TV PIN......................................................................52
Bluetooth headset ......................................................53
Managing Registered Bluetooth device..................55
My Bluetooth Information .........................................56
Receiving photos through external
Bluetooth device...........................................................57
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup .................................................. 14
DVD Setup ................................................................ 16
VCR Setup................................................................. 18
Other A/V Source Setup....................................... 20
external stereo Setup ..............................................20
AV output setup ......................................................21
Usb in setup ............................................................ 21
PC Setup ................................................................... 22
- Screen Setup for PC Mode........................... 24
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS ................28
Turning on the TV ........................................................32
Programme Selection...................................................32
Volume Adjustment ................................................... 32
Quick Menu....................................................................33
On Screen Menus Selection and adjustment.......34
Auto programme tuning ............................................35
Manual programme Tuning ........................................36
Programme Edit ...........................................................38
SELECTING THE Programme List ............................40
favourite programme setup ........................................41
Input LIST .......................................................................42
SIMPLINK........................................................................43
2
TO USE THE USB DEVICE
When connecting a USB device ...............................58
Photo list.........................................................................59
Music list.........................................................................63
Movie list ........................................................................66
DivX Registration Code .............................................70
Deactivation ..................................................................71
PICTURE CONTROL
Picture Size (Aspect Ratio) Control........................72
Energy Saving ......................................................74
Power Saving ..................................................................74
Preset picture settings
Picture Mode-Preset .................................................75
Auto Colour Tone Control
(Warm/Medium/Cool) .............................................76
Manual Picture Adjustment
Picture Mode-User option ......................................77
Picture Improvement Technology ............................78
Advanced - Black(Darkness) Level...........................79
Advanced - Film Mode................................................80
Picture Reset ..................................................................81
Image Sticking Minimization (ISM) Method .........82
Demo mode ...............................................................83
Mode setting .............................................................84
TELETEXT
Auto Volume Leveler ................................................85
Preset Sound Settings-Sound Mode ...................86
Sound Setting Adjustment -User Mode..............87
SRS TruSurround XT................................................87
Clear Voice II .............................................................88
Balance .......................................................................89
Selecting audio out .................................................90
Audio Reset................................................................91
TV Speakers On/ Off Setup ..................................92
I/II
Stereo/Dual Reception .......................................93
NICAM Reception ................................................94
Speaker Sound Output Selection......................94
On-Screen Menu Language Selection .................95
Switch on/off ...........................................................99
SIMPLE Text...............................................................99
TOP Text.....................................................................99
FASTEXT ..................................................................100
Special Teletext Functions....................................100
CONTENTS
SOUND & LANGUAGE CONTROL
APPENDIX
Troubleshooting......................................................101
Maintenance ............................................................103
Product Specifications ..........................................103
IR Codes...................................................................106
External Control Device Setup............................108
TIME SETTING
Clock Setup ...............................................................96
Auto on/off timer setting .......................................97
Sleep Timer setting ..................................................98
3
PREPARATION
FRONT PANEL CONTROLS
■
Here shown may differ from your TV
CAUTION
G
PREPARATION
When the TV cannot be turned on with the remote control, press the main power button on the TV.
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control.)
42/50PQ1***
Remote Control Sensor
Power/Standby Indicator
•Illuminates red in standby mode.
•Illuminates blue when the TV is switched on.
OK
MENU
INPUT
INPUT
MENU
P
OK
VOLUME
PROGRAMME
42/50PQ3***
POWER
OK
MENU
INPUT
P
Intelligent Sensor
Adjusts picture according to the surrounding
conditions.
Remote Control
Sensor
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is
switched on.
INPUT
MENU
INPUT
INPUT
4
MENU
OK
OK
MENU
INPUT
P
OK
MENU
P
OK
VOLUME
P
PROGRAMME
POWER
42/50PQ6***, 42/50PS6***
PROGRAMME
P
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
PREPARATION
P
VOLUME
OK
OK
MENU
42/50PQ7***
MENU
INPUT
INPUT
POWER
Intelligent Sensor
Adjusts picture
according to the surrounding conditions.
Remote Control
Sensor
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
50/60PS8***
Intelligent Sensor
Adjusts picture
according to the surrounding conditions.
Remote Control
Sensor
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
5
PREPARATION
50/60PS4***
PREPARATION
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
POWER
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
INPUT
MENU
INPUT
INPUT
6
OK
MENU
OK
-
OK
MENU
INPUT
-
MENU
-
+
+
OK
+
P
P
P
VOLUME
PROGRAMME
BACK PANEL INFORMATION
Only 42/50PQ3***,
50/60PS4***
Here shown may differ from your TV.
USB IN
USB IN
R
10
HDMI IN3
2
6
PR
PB
VIDEO
IN
RS-232C IN
(CONTROL&SERVICE)
2
1
8
9
5
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
6
USB IN
SERVICE ONLY
10
ANTENNA
IN
R
R
AUDIO
L
VARIABLE AUDIO OUT
VARIABLE AUDIO OUT
L
PR
VIDEO
)
7
AV
ANTENNA
IN
7
9
(
1
2
3
4
5
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI(Except
42/50PQ1***) port with DVI to HDMI cable.
VARIABLE AUDIO OUT
)
5
OUT
RS-232C IN
RGB(PC)
(CONTROL&SERVICE)
HDMI IN
- AUDIO - (Mono) (
2
IN1
1
AV
HDMI IN
VIDEO
HDMI
HDMI/DVI IN
4
- AUDIO - (MONO)
PB
VIDEO
AUDIO IN
(RGB/DVI)
Except 42/50PQ1***
COMPONENT IN
4
AV IN 2
COMPONENT IN
3
Y
2
7
Y
AV IN 2
R
VIDEO L/MONO AUDIO R
VIDEO L/MONO AUDIO R
1
PREPARATION
2
AUDIO
A
7
Audio/Video Input (AV IN1/2)
Connect audio/video output from an external
device to these jacks.
8
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
9
Antenna Input
Connect RF antenna to this jack.
10
USB Input
Used for Music, Photo and Movie (Except
42/50PQ3***).
42/50PQ1*** : Service only
RGB/DVI Audio Input
Connect the audio from a PC.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB Input
Connect the output from a PC.
7
PREPARATION
STAND INSTALLATION (Except 60PS4***, 60PS8***)
■
■
PREPARATION
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can
deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in
the back of the TV.
! NOTE
G
FRONT
8
When assembling the stand, make sure to distinguish and assemble the
front and rear side of the stand correctly.
CAREFUL INSTALLATION ADVICE
You should purchase necessary components to fix the TV safety and secure to the wall from the market.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will
also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
2
PREPARATION
1
1
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
9
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
After Connecting the cables as necessary,
install CABLE HOLDER as shown and bundle the cables.
PREPARATION
50/60PS4***, 42/50PQ7***, 50/60PS8*** only
1
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
2
CABLE HOLDER
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE HOLDER
CABLE MANAGEMENT CLIP
How to remove the cable management clip (50/60PS4***, 42/50PQ7***, 50/60PS8*** only )
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
! NOTE
G
10
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
SWIVEL STAND
This feature is not available for all models.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to
suit your viewing position.
PREPARATION
NOT USING THE DESK-TYPE STAND
■
Here shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover. Insert the P R O T E C T I O N C O V E R into the TV
until clicking sound.
Protection cover
EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have a
qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
11
PREPARATION
A
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
PREPARATION
4 inches
4 inches
4 inches
WALL MOUNT: HORIZONTAL INSTALLATION
A
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
A
We recommend that you purchase a wall mounting
bracket which supports VESA standard.
A LG recommends that wall mounting be performed
by a qualified professional installer.
A
B
! NOTE
G
Should Install wall mount on a solid wall perpendicular to the floor.
Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
G The surface that wall mount is to be mounted on
should be of sufficient strength to support the
weight of TV set; e.g. concrete, natural rock, brick
and hollow block.
G Installing screw type and length depends on the wall
mount used. Further information, refer to the
instructions included with the mount.
G LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may
cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
G
4 inches
4 inches
4 inches
4 inches
4 inches
12
Model
42PQ1***
50PQ1***
42PQ3***
50PQ3***
50PS4***
60PS4***
42PQ6***
50PQ6***
42PS6***
50PS6***
42PQ7***
50PQ7***
50PS8***
60PS8***
VESA Standard
(A * B)
Screw Quantity
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
M8
600 * 400
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
600 * 400 M8
4
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
ANTENNA
IN
VARIABLE AUDIO OUT
(
)
VARIABLE AUDIO OUT
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
PREPARATION
Wall
Antenna
Socket
)
■
(
■
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
(
)
UHF
Antenna
Signal
Amplifier
VARIABLE AUDIO OUT
Outdoor
Antenna
(VHF, UHF)
ANTENNA
IN
VHF
■
■
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
13
EXTERNAL EQUIPMENT SETUP
■
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
Here shown may differ from your TV.
HD RECEIVER SETUP
L
R
Y
PB
2
PR
HDMI
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
PB
L
(
)
PR
1
ANTENNA
IN
R
O
(24Hz/30Hz/50Hz/60Hz)
VIDEO
)
(
O
(50/60Hz only)
AUDIO
1080p
Y
Component
COMPONENT IN
Only 42/50PQ1***
Signal
2
L
14
VIDEO
COMPONENT IN
L
R
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
C o m p o n e n t 2 input source(Except 42/50PQ1***).
RGB(PC)
1
4
VARIABLE AUDIO OUT
VIDEO
1
OUT
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
PR
AV
HDMI IN
2
2
3
AN
Y
HDMI
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
PB
AUDIO IN
(RGB/DVI)
(Mono) - AUDIO -
2
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O jacks on
the TV.
IN1
EXTERNAL EQUIPMENT SETUP
1
AUDIO
Connecting with a component cable
R
Y
PB
PR
Connecting a set-top box with an HDMI cable
A
HDMI
RS-232C IN
(CONTROL&SERVICE)
(
)
RGB(PC)
1
EXTERNAL EQUIPMENT SETUP
Select H D M I 1(or H D M I (Only 42/50PQ1***)),
H D M I 2(Except 42/50PQ1***) or H D M I 3 (Except
42/50PQ1***, 42/50PQ3***, 50/60PS4***) input
source using the I N P U T button on the remote control.
2
VIDEO
1
HDMI IN
2
- AUDIO - (Mono)
HDMI/DVI IN
1
Connect the HDMI output of the digital set-top box to
the H D M I / D V I I N 1(or H D M I I N(Only
42/50PQ1***)),, H D M I I N 2 (Except 42/50PQ1***) or
H D M I I N 3(Except 42/50PQ1***,42/50PQ3***,
50/60PS4***) jack on the TV.
HDMI-DTV OUTPUT
)
)
Only 42/50PQ1***
(
(
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
3
(
)
HDMI IN
USB IN
RS-232C IN
SERVICE ONLY
(CONTROL&SERVICE)
! NOTE
that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
G HDMI mode supports PCM audio format only.
G Audio format was reseted to Dolby/DTS/Bitstrem in DVD
Player or STB, it should be changed to PCM.
G We recommed using under 10m of the HDMI cable.
When using over the length, connect a amplifier or repeater.
)
1
(
G Check
HDMI-DTV OUTPUT
Connecting with an HDMI to DVI cable
AUDIO IN
(RGB/DVI)
(Except 42/50PQ1***)
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
3
VARIABLE AUDIO OUT
RS-232C IN
(CONTROL&SERVICE)
RGB(PC)
OUT
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
HDMI IN
2
VIDEO
2
AV
HDMI
HDMI/DVI IN
1
(Mono) - AUDIO -
Connect the DVI output of the digital set-top box to the
H D M I / D V I I N 1 jack on the TV.
IN1
1
1
2
Select H D M I 1 input source using the I N P U T button
on the remote control.
4
! NOTE
HDMI mode supports PCM audio format only.
G Audio format was reseted to Dolby/DTS/Bitstrem in DVD
Player or STB, it should be changed to PCM.
G We recommed using under 10m of the HDMI cable.
When using over the length, connect a amplifier or repeater.
G
DVI-DTV OUTPUT
L
R
15
EXTERNAL EQUIPMENT SETUP
DVD SETUP
R
PB
PR
(
)
R-Y
PB
B-Y
PR
Y
L
PR
VIDEO
PB
AUDIO
Y
)
PR
(
PB
Y
To achieve better picture quality, connect a DVD player to the
component input ports as shown below.
Y
Y
Cb
Cr
Y
Pb
Pr
1
ANTENNA
IN
R
Video output ports
on DVD player
2
L
16
VIDEO
COMPONENT IN
PR
VIDEO
IN1
Y
Only 42/50PQ1***
Component Input ports
Component ports on the TV
AN
Y
L
2
5
Refer to the DVD player's manual for operating
instructions.
RGB(PC)
L
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
C o m p o n e n t 2 input source (Except 42/50PQ1***).
2
R
4
1
1
Turn on the DVD player, insert a DVD.
AV
HDMI IN
2
VARIABLE AUDIO OUT
3
HDMI
OUT
Connect the audio outputs of the DVD to the C O MP O N E N T I N A U D I O jacks on the TV.
PB
AUDIO IN
(RGB/DVI)
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
2
Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the TV.
(Mono) - AUDIO -
1
AUDIO
Connecting with a component cable
R
Y
PB
PR
Connecting with a HDMI cable
RS-232C IN
(CONTROL&SERVICE)
2
3
HDMI IN
2
VIDEO
A
HDMI
HDMI/DVI IN
1
Select H D M I 1(or H D M I (Only 42/50PQ1***)),
H D M I 2(Except 42/50PQ1***) or H D M I 3(Except
42/50PQ1***, 42/50PQ3***, 50/60PS4***) input
source using the I N P U T button on the remote control.
1
Refer to the DVD player's manual for operating instructions.
HDMI-DVD OUTPUT
EXTERNAL EQUIPMENT SETUP
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1(or H D M I I N(Only 42/50PQ1***)),,
H D M I I N 2(Except 42/50PQ1***) or H D M I I N
3 (Except 42/50PQ1***, 42/50PQ3***, 50/60PS4***)
jack on the TV.
(Mono) - AUDIO -
1
RGB(PC)
)
Only 42/50PQ1***
G The
TV can receive video and audio signals simultaneously
when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
G HDMI mode supports PCM audio format only.
G Audio format was reseted to Dolby/DTS/Bitstrem in DVD
Player or STB, it should be changed to PCM.
G We recommed using under 10m of the HDMI cable.
When using over the length, connect a amplifier or repeater.
(
! NOTE
HDMI IN
USB IN
RS-232C IN
SERVICE ONLY
(CONTROL&SERVICE)
1
HDMI-DVD OUTPUT
17
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
ANTENNA
IN
2
EXTERNAL EQUIPMENT SETUP
AUDIO
(
)
C
Connecting with a RF Cable
1
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
2
VIDEO
L
R
Wall Jack
Antenna
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for
viewing.
(
)
1
18
Connecting with a RCA cable
Only 42/50PQ1***
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
L
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
1
Y
PB
COMPONENT IN
L
PR
VIDEO
DIO
VIDEO
- AUDIO - (MONO)
ANT
I
IN
VIDEO
AUDIO
2
R
1
COMPONENT IN
Y
L
VARIABLE AUDIO OUT
OUT
(PC)
IN1
- AUDIO - (Mono)
VIDEO
PR
AV
I IN
R
1
PB
AUDIO IN
(RGB/DVI)
L
R
EXTERNAL EQUIPMENT SETUP
ANT IN
AV
ANTENNA
IN
1
V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow,
Connect the A U D I O/V
Audio Left = white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3
Select A V 1 input source using the I N P U T button on the remote control.
If connected to A V I N 2, select A V 2 input source(Except 42/50PQ1***).
! NOTE
G
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack
of the TV.
19
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
Operate the corresponding external equipment.
Refer to external equipment operating guide.
L
R
)
3
VIDEO
(
Select A V 2(Except 42/50PQ1***) input source
using the I N P U T button on the remote control.
If connected to A V I N 1, select A V 1 input
source.
USB IN
2
Video Game Set
VIDEO L/MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
1
V I D E O jacks between TV
Connect the A U D I O/V
and external equipment. Match the jack colours.
(Video = yellow, Audio Left = white, and Audio Right
= red)
1
AV IN 2
VI
PR
VIDEO
! NOTE
G
G
20
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
(G p . 9 2 )
Select V a r i a b l e O u t in A u d i o menu to connect the
V A R I A B L E A U D I O O U T jacks.(G p . 9 0)
ANTENNA
IN
2
1
OUT
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided with
the amplifier.
IN1
1
Connect the input jack of the stereo amplifier to the
V A R I A B L E A U D I O O U T jacks on the TV.
R
R -AUDIO-L
AUDIO
L
)
(
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
COMPO
EXTERNAL STEREO SETUP (Except 42/50PQ1***)
1
PR
V
The TV has a special signal output capability which allows you
L
AUDIO
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
1
ANTENNA
IN
2
2
OUT
Connect the second TV or monitor to the TV’s AV OUT
jacks.
1
S-VIDEO
! NOTE
G
Component, RGB, HDMI input sources cannot be used for
AV out.
G
We recommend to use the AV OUT jacks for VCR recording.
VIDEO
L
R
EXTERNAL EQUIPMENT SETUP
1
R
(
)
VARIABLE AUDIO OUT
to hook up the second TV or monitor.
COMP
AV OUTPUT SETUP(Except 42/50PQ1***)
USB IN SETUP (Except 42/50PQ1***)
USB IN
R -AUDIO-L
(
)
Here shown may differ from your TV.
1
R
■
1
Connect the USB device to the U S B I N jacks on the side of TV.
2
After connecting the U S B I N jacks, you use the U S B function. (G p .58)
21
EXTERNAL EQUIPMENT SETUP
PC SETUP (Except 42/50PQ1***)
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
3
Turn on the TV and the PC.
4
Select R G B input source using the INPUT button on
the remote control.
2
1
AUDIO
(
)
RGB OUTPUT
22
1
VIDEO
R
AUDIO
L
VARIABLE AUDIO OUT
RGB(PC)
OUT
CE)
2
VIDEO
(Mono) - AUDIO -
Connect the RGB output of the PC to the R G B ( P C )
jack on the TV.
IN1
EXTERNAL EQUIPMENT SETUP
1
PR
AV
HDMI IN
2
2
HDMI
PB
AUDIO IN
(RGB/DVI)
Connecting with a D-sub 15 pin cable
COMPONENT IN
Y
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
A
Supported Display Resolution
HDMI-DTV mode
RGB-PC mode (Except 42/50PQ1***)
Vertical
Frequency(Hz)
59.94
60.00
720x576
31.25
50.00
1280x720
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080
33.72
33.75
28.125
67.432
67.5
56.250
27
33.75
59.94
60.00
50.00
59.94
60
50
24
30
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
640x350
31.468
70.09
720x480
720x400
31.469
70.09
640x480
31.469
59.94
800x600
37.879
60.317
1024x768
48.363
60.004
1280x768
47.776
59.87
1360x768
47.720
59.799
1280x1024
63.668
59.895
1920x1080
66.587
59.934
Except 42PQ3***, 42PQ6*** ,42PS6***
,42PQ7***
EXTERNAL EQUIPMENT SETUP
Horizontal
Frequency(kHz)
31.47
31.50
Resolution
Only FHD Model
! NOTE
Avoid keeping a fixed image on the TV ’s screen
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
G The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G We recommend using 1024 x 768, 60Hz
(42PQ3***, 42PQ6***, 42PQ7***)/1360 x 768,
60Hz(50PQ3***, 50PQ6***, 50PQ7***)/1920
x 1080, 60Hz(50PS6***, 50PS8***, 60PS4***,
G
60PS8***) for the PC mode, this should provide
the best picture quality.
G If the resolution of PC is over SXGA, there will be
no picture on the TV.(Only HD Models)
G Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.
23
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode (Except 42/50PQ1***)
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode: Component(except 480i, 576i), RGB
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
Screen
OK
E
• Contrast
Move
Prev.
Resolution
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
Auto Config.
To Set
Position
R
G
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
G
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s e t.
OK
Select Y e s.
3
4
5
OK
Run R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
24
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
P o s i t i o n operates in Component(except 480i, 576i), RGB mode.
S i z e, P h a s e operate only in RGB mode.
Move
Screen
OK
Move
Prev.
E
• Contrast
Resolution
100
• Brightness
50
• Sharpness
70
• Colour
70
Auto Config.
D
• Tint
0
Position
R
G
F
G
Size
• Advanced Control
• Picture Reset
G
E
Phase
Screen
Screen
Reset
1 MENU
EXTERNAL EQUIPMENT SETUP
PICTURE
Select P I C T U R E.
2
OK
Select S c r e e n.
OK
Select P o s i t i o n, S i z e or P h a s e.
3
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
25
EXTERNAL EQUIPMENT SETUP
Selecting Resolution (Except 42PQ3***, 42PQ6*** ,42PS6*** ,42PQ7*** )
To view a normal picture, match the resolution of RGB mode at TV and selection at PC.
This function works in the following mode: RGB[PC]
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
Screen
OK
Move
Prev.
E
• Contrast
Resolution
100
• Brightness
• Sharpness
70
• Colour
70
• Tint
0
G
1024 x 768
1280 x 768
50
Auto Config.
1360 x 768
Position
R
G
• Advanced Control
• Picture Reset
Screen
Screen
Size
Phase
Reset
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s o l u t i o n.
3
4
Select the desired resolution.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
26
Auto Configure (RGB [PC] mode only)
Automatically adjust the picture position and minimizes image instability. After adjustment, if the image is
still not correct, your TV is functioning properly but needs further adjustment.
PICTURE
Move
Screen
OK
Move
Prev.
E
• Contrast
Resolution
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
Auto Config.
G
Position
R
• Advanced Control
G
Size
To Set
Yes
No
• Picture Reset
Screen
Screen
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
Phase
Reset
1 MENU
Select P I C T U R E.
• If the position of the image is still not correct,
try Auto adjustment again.
2
• If picture needs to be adjusted again after Auto
OK
Select S c r e e n.
OK
Select A u t o C o n f i g ..
OK
Select Y e s.
adjustment in RGB (PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
5
OK
Run A u t o C o n f i g ..
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
27
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS (Only 42/50PQ1***, 42/50PQ3***)
When using the remote control, aim it at the remote control sensor on the TV.
This feature is not available for all models.
POWER
Only 42/50PQ1***
RATIO
INPUT
AV MODE
POWER SAVING
POWER SAVING Adjust the power saving mode of the TV.
RATIO Selects your desired picture format.
POWER
RATIO
INPUT
AV MODE
ENERGY SAVING
WATCHING TV / PROGRAMME CONTROL
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
AV MODE It helps you select and set images and sounds when
connecting AV devices.(G p . 4 7)
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
ENERGY Adjust the power saving mode of the TV.
SAVING (Except 42/50PQ1***)
MUTE
P
0~9 number Selects a programme.
button Selects numbered items in a menu.
P
A
G
E
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
OK
VOLUME UP Adjusts the volume.
/DOWN
MENU
MUTE Switches the sound on or off.
RETURN
Programme Selects a programme.
UP/DOWN
FAV
1
Q.MENU FREEZE
MARK
PAGE Move from one full set of screen information to the next
UP/DOWN one.
1
FREEZE
1
FAV
Q.MENU
28
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 9 9)
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
THUMBSTICK Allows you to navigate the on-screen menus and adjust
POWER
RATIO
INPUT
AV MODE
POWER SAVING
(Up/Down/Left/ the system settings to your preference.
Right)
OK Accepts your selection or displays the current mode.
POWER
RATIO
INPUT
AV MODE
ENERGY SAVING
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
SIMPLINK / Controls SIMPLINK or USB menu.
USB Menu (Except 42/50PQ1***)
control buttons
2
FAV Displays the selected favourite programme.
MUTE
P
P
A
G
E
MARK Check and un-check programmes in the USB menu.
(Except 42/50PQ1***)
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.(G p . 4 3)(Except 42/50PQ1***)
OK
Q. MENU Select the desired quick menu source.(G p . 3 3)
MENU
RETURN
2
FAV
Q.MENU FREEZE
MARK
WATCHING TV / PROGRAMME CONTROL
1
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
FREEZE Pause the present picture at the screen. (It doesn't
work at USB Mode.)
The TV returns to normal viewing automatically if no signal
is received or no operation is performed for 5 minutes.
Controls the USB menu.(Except 42/50PQ1***)
Installing Batteries
FREEZE
FAV
■
Open the battery compartment cover on
the back and install the batteries matching
correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix
old or used batteries with new ones.
■
Close cover.
Q.MENU
29
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS (Except 42/50PQ1***,42/50PQ3***)
When using the remote control, aim it at the remote control sensor on the TV.
RATIO Selects your desired picture format.
RATIO POWER
SLEEP Sets the sleep timer.
ENERGY SAVING
SLEEP
POWER Switches the TV on from standby or off to standby.
Q. MENU MENU
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
ENERGY Adjust the power saving mode of the TV.
SAVING
WATCHING TV / PROGRAMME CONTROL
OK
Q. MENU Select the desired quick menu source.(G p . 3 3)
RETURN
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
AV MODE
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.(G p . 4 3)
MARK
FAV
P
A
G
E
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/ the system settings to your preference.
Right)
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q. VIEW
OK Accepts your selection or displays the current mode.
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
Controls the USB menu.
AV MODE It helps you select and set images and sounds when
connecting AV devices.(G p . 4 7)
1
FREEZE
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 9 9)
FREEZE Pause the present picture at the screen. (It doesn't work
at USB Mode.)
The TV returns to normal viewing automatically if no signal is
received or no operation is performed for 5 minutes.
30
VOLUME UP Adjusts the volume.
/DOWN
RATIO POWER
ENERGY SAVING
SLEEP
MARK Check and un-check programmes in the USB menu.
Q. MENU MENU
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
OK
PAGE Move from one full set of screen information to the next
UP/DOWN one.
RETURN
AV MODE
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
MARK
Q.VIEW Returns to the previously viewed programme.
FAV
P
A
G
E
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q. VIEW
SIMPLINK / Controls SIMPLINK or USB menu.
USB Menu
control buttons
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
Installing Batteries
FREEZE
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
31
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
)button on the TV or press the
In standby mode to turn TV on, press the INPUT or P D E (or P
POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
Initializing Guide
WATCHING TV / PROGRAMME CONTROL
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, M o d e S e t t i n g, A u t o T u n i n g.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. “Store Demo” mode is only for shop display and not for general customer use.
c. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
d. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data,
“Store Demo” mode initializes the product to the image quality set by us after a certain period of time.
e. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu.
PROGRAMME SELECTION
1
Press the P
number.
or NUMBER buttons to select a programme
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ or - , AV Mode button.
32
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• A s p e c t R a t i o: Selects your desired picture format.
Q.Menu
Aspect Ratio
F
16:9
G
Picture Mode
Vivid
Sound Mode
Standard
Mono
Audio
120 Min.
Sleep Timer
Favourite
Off
USB Eject
Eject
WATCHING TV / PROGRAMME CONTROL
For Zoom Setting, select 16:9, Original, 4:3, 14:9, Zoom and Cinema Zoom1 in Ratio
Menu. After completing Zoom Setting, the display goes back to Q.Menu.
• P i c t u r e M o d e : Selects your desired Picture Mode.
• S o u n d M o d e : It is a feature to automatically set the sound combination which it
deems the best for the images being watched. Selects your desired Sound Mode.
• A u d i o : Selects the sound output.
• S l e e p T i m e r : Sets the sleep timer.
• F a v o u r i t e : Selects the favourite programme.
• U S B E j e c t : Selects “Eject” in order to eject USB device. (Except 42/50PQ1***)
Except 42/50PQ1***
Close
1Q. MENU
Display each menu.
2
Select your desired Source.
3
• Press the Q . M E N U button to return to normal TV viewing.
OK
33
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
■ Here shown may differ from your TV.
SETUP
Move
PICTURE
OK
Auto Tuning
Move
Aspect Ratio
Manual Tuning
Energy Saving
Programme Edit
Picture Mode
AUDIO
OK
Move
: 16:9
Auto Volume
: Off
: On
Clear Voice ll
: Off
: Vivid
• Contrast
• Brightness
• Level
100
Balance
50
Sound Mode
WATCHING TV / PROGRAMME CONTROL
Move
Key Lock
: Off
Set ID
:1
70
• SRS TruSurround XT : Off
• Treble
50
• Bass
50
0
R
G
E
TIME
OK
: Normal
Demo Mode
: Off
Mode Setting
Move
OK
Clock
SETUP
ISM Method
R
70
Input Label
: On
+
L
• Colour
: English
SIMPLINK
-
: Standard
E
Menu Language
3
0
• Sharpness
• Tint
OPTION
OK
PICTURE
OPTION
: Home Use
AUDIO
INPUT
BLUETOOTH
TIME
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
USB
E
Except 42/50PQ1***
(Only 42/50PQ1***)
INPUT
Move
OK
INPUT
Move
OK
BLUETOOTH
Move
OK
USB
TV
TV
Bluetooth
: Off
Photo List
AV
AV1
TV PIN
: 0000
Music List
Component
AV2
Bluetooth Headset : Disconnected
Movie List
HDMI
Component1
Registered Bluetooth Device
DivX Reg. Code
Component2
My Bluetooth Info.
Deactivation
Move
RGB
HDMI1
HDMI2
E
Except 42/50PQ3***
Only 42/50PQ7***, 50/60PS8***
1 MENU
2
OK
Display each menu.
Select a menu item.
3
OK
Move to the pop up menu.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
34
OK
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
SETUP
Move
OK
SETUP
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Move
OK
Check your antenna connection. The
previous channel information will be
updated during Auto Tuning.
Still Continue?
Yes
1 MENU
2
Select S E T U P.
OK
Select A u t o T u n i n g.
OK
Select Y e s.
No
• If you wish to keep on auto tuning select Y e s
using the
button. Then, press the OK button. Otherwise select N o.
3
4
OK
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Run A u t o t u n i n g.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Move
OK
Storage
1
F
System
G
BG
WATCHING TV / PROGRAMME CONTROL
Band
V/UHF
Channel
0
Fine
F
G
Search
F
G
Name
C 02
Store
Close
1 MENU
2
OK
5
Select S E T U P.
Select V / U H F or C a b l e.
6
Select M a n u a l T u n i n g.
or
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
3
OK
or
1
2
3
4
5
6
7
8
9
Select the desired programme number on.
7
Commence searching.
0
4
8
OK
Select a TV system.
Select S t o r e.
9
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
• B G : PAL B/G, SECAM B/G (Europe / East Europe / Asia / NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
D K : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : NTSC-M (USA / Korea / Philippines), PAL-M(South America)
• To store another channel, repeat steps 3 to 8.
36
SETUP
Move
SETUP
OK
Move
OK
Auto Tuning
Auto Tuning
Manual
Manual Tuning
Tuning
Manual
Manual Tuning
Tuning
Storage
1
Programme Edit
Programme Edit
System
BG
Band
V/UHF
Channel
0
Fine
F
G
Search
F
G
Name
C 02
Store
Close
Assigning a station name
You can assign a station name with five characters to each programme number.
1 MENU
2
3
4
Select S E T U P.
OK
Select M a n u a l T u n i n g.
OK
Select N a m e.
OK
5
OK
6
A
OK
Select the position and
make your choice of
the second character,
and so on.
You can use an the
alphabet A to Z , the
number 0 to 9 , +/ -,
and blank.
Select S t o r e.
OK
WATCHING TV / PROGRAMME CONTROL
A
Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1 MENU
2
OK
3
OK
Select S E T U P.
Select M a n u a l T u n i n g.
Select F i n e.
4
Fine tune for the best picture and
sound.
5
6
OK
Select S t o r e.
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
viewing.
button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
WATCHING TV / PROGRAMME CONTROL
6
SETUP
Move
C05
OK
1 C 01
Auto Tuning
2 C 04
3 C 05
Manual Tuning
4 BLN 2
5 S02
Programme Edit
6 C05
7 C06
Pr. Change
Delete
1 MENU
TV
0 -----
8 C07
9 C12
10 BBC1
11 C25
12 C40
13 C50
14 C52
15 C61
Navigation
P
Page Change
Move
Previous
Skip
Select S E T U P.
2
OK
Select P r o g r a m m e E d i t.
3
OK
4
Enter the P r o g r a m m e E d i t.
Select a programme to be
stored or skipped.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
38
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
A
Deleting a programme
1
Select a programme number to be deleted.
• The selected programme is deleted, all the following
programmes are shifted up one position.
2
RED Turn the deleted programme number to RED.
RED Release the deleted programme.
A
Moving a programme
1
Select a programme number to be moved.
2
YELLOW
Turn the moved programme number to YELLOW.
3
YELLOW Release the moved programme.
A
WATCHING TV / PROGRAMME CONTROL
3
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to BLUE.
3
BLUE Release the skipped programme.
• When a programme number is skipped it means
that you will be unable to select it using the P
button during normal TV viewing.
• If you wish to select the skipped programme,
directly enter the programme number with the
NUMBER buttons or select it in the programme
edit or table menu.
39
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
1 C 01
1 C 02
1 C 03
WATCHING TV / PROGRAMME CONTROL
Exit
A
Displaying programme list
1
Display the Programme List.
LIST
A
2
Select a programme.
OK
Switch to the chosen programme number.
Paging through a programme list
1
P
40
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme list indicate there is no
station name assigned.
Selecting a programme in the programme list
1
A
• You may find some blue programmes. These
P
A
G
E
Turn the pages.
2
LIST
Return to normal TV viewing.
FAVOURITE PROGRAMME SETUP
A
Selecting favourite programme
Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without
having to wait for the TV to scan through all the in-between programmes.
To tune to a favorite programme, press the F A V(Favorite)button repeatedly.
1
Q.Menu
P
Aspect Ratio
16:9
Picture Mode
Vivid
Sound Mode
Standard
or
1
2
3
4
5
6
7
8
9
Select your desired programme.
0
2Q. MENU
Select F a v o u r i t e.
120 Min
Sleep Timer
F
USB Eject
Favourite
Eject
Close
G
3
Select F a v o u r i t e .
4Q. MENU
Return to TV viewing.
Except 42/50PQ1***
• This will automatically include the selected programme into your favourite programme list.
A
Displaying the favourite programme list
Favourite List
1 MARK
1 C 01
WATCHING TV / PROGRAMME CONTROL
Mono
Audio
Favourite
P
A
G
E
Display the Favourite Programme List.
FAV
2 C 02
2 C 02
Exit
41
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
1
Select the input source.
OK
TV
AV1
WATCHING TV / PROGRAMME CONTROL
HDMI3
AV2
HDMI2
Component1
HDMI1
RGB
Except 42/50PQ3***,50/60PS4***
(Only 42/50PQ1***)
TV
AV
HDMI
Component
• You can also adjust INPUT menu. (Only 42/50PQ1***, 42/50PQ7***, 50/60PS8***)
(Only 42/50PQ1***)
INPUT
Move
OK
INPUT
TV
TV
AV1
AV
AV2
Component
Component1
HDMI
Move
OK
Component2
RGB
HDMI1
HDMI2
E
• T V : Select it when watching the TV.
• A V : Select it when watching the VCR or external equipment.
• C o m p o n e n t : Select it when using DVD or Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD or Digital set-top box depend on connector.
42
Component2
(Except 42/50PQ1***)
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
The product might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without
additional cables and settings.
If you do not require the SIMPLINK menu, select “Off”.
Move
Menu Language
OK
: English
Input Label
OPTION
Move
Menu Language
OK
: English
Input Label
Off
SIMPLINK
SIMPLINK
On
:: On
SIMPLINK
SIMPLINK
On
:: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
: Home Use
Mode Setting
Mode Setting
E
On
On
: Home Use
E
1 MENU
Select O P T I O N.
WATCHING TV / PROGRAMME CONTROL
OPTION
2
OK
Select S I M P L I N K.
OK
Select O n or O f f.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
43
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the
/
/
/
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional
settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
WATCHING TV / PROGRAMME CONTROL
44
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
-Sync Power on : When the equipment with Simplink function connected HDMI terminal starts to play,
The TV will change automatically to turn on mode.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK,
does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used.
(*CEC: Consumer Electronics Control).
Connecting to Home Theater with the SIMPLINK logo.
3
1
1
RGB(PC)
OUT
RS-232C IN
(CONTROL&SERVICE)
VARIABLE AUDIO OUT
VIDEO
HDMI IN
2
2
Select Home Theater in the Speaker menu by pushing
the S I M P L I N K button.
When you select or operate a media device with home theater
function, the speaker automatically switches to home theater
speaker (HT speaker).
Home Theater
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal and Side terminal (HDMI
terminal) of the SIMPLINK device with the HDMI cable.
G When you switch the Input source using the INPUT button on the remote control, you can stop the
operation of a device controlled by SIMPLINK.
G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker
to operate the Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is
set to the TV volume.
G
SIMPLINK Menu
Press the
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
3
WATCHING TV / PROGRAMME CONTROL
G
Connect the Audio output terminal on the back of the
TV and the Audio input terminal of the Home Theater
using optical cables.
AV
HDMI
HDMI/DVI IN
1
- AUDIO - (Mono)
2
AUDIO IN
(RGB/DVI)
IN1
1
Connect the H D M I / D V I I N 1 , H D M I I N 2 or H D M I
I N 3(Except 42/50PQ3***,50/60PS4***) terminal on
the back of the TV and the HDMI output terminal of the
Home Theater using HDMI cables.
V C R p l a y b a c k : Play and control the connected
VCR.
4
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
5
Audio Out to Home theater/Audio Out to TV:
Select Home theater or TV speaker for Audio Out.
1
2
Selected Device
3
When device is not connected (displayed in gray)
4
5
When a device is connected
(displayed in bright colour)
45
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
Only 42/50PQ1***
OPTION
Move
Menu Language
OK
: English
Input Label
AV1
OPTION
Move
Menu Language
: English
Input Label
Component
Component 1
HDMI
Component 2
WATCHING TV / PROGRAMME CONTROL
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
RGB
Set ID
:1
Set ID
:1
HDMI1
ISM Method
: Normal
ISM Method
: Normal HDMI2
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Mode Setting
: Off
HDMI3
: Home Use
E
G
AV2
SIMPLINK
E
F
OK
AV
F
G
Close
Close
Except 42/50PQ3***,
50/60PS4***
1 MENU
Select OPTION.
2
OK
Select Input Label.
OK
Select the source.
3
4
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
46
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to select the desired source.
2
WATCHING TV / PROGRAMME CONTROL
1AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
OK
• If you select C i n e m a in AV mode, C i n e m a will be selected both for
P i c t u r e M o d e and S o u n d M o d e in P I C T U R E menu and A U D I O
menu respectively.
O f f” in A V m o d e, the picture and image which you ini• If you select “O
tially set will be selected.
• Press the R E T U R N button to return to normal TV viewing.
47
WATCHING TV / PROGRAMME CONTROL
KEY LOCK
The TV can be set so that the remote control is required to control it.
This feature can be used to prevent unauthorized viewing.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
OPTION
Move
Menu Language
OK
: English
Input Label
Move
Menu Language
OK
: English
Input Label
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Off
Set ID
:1
Set ID
:1
On
On
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
Key Lock
Mode
Setting
Off Use
:: Home
E
1 MENU
OPTION
Mode
Setting
Key
Lock
: :Home
Off Use
E
Select O P T I O N.
O n’, if the TV is turned off, to turn on the
• In K e y L o c k ‘O
OK
Select K e y L o c k.
OK
Select O n or O f f.
) button on the
TV, press the INPUT, P D or E(or P
TV or POWER, INPUT, P
or NUMBER buttons on
the remote control then the set will be turned on.
• With the K e y L o c k O n, the display ‘ X K e y L o c k O n ’
appears on the screen if any button on the front panel is
r / I)
pressed while viewing the TV (Except main power (r
botton).
2
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
48
Initializing
(Reset to original factory settings)
Use to quickly reset all the menu options to their original factory preset values.
This function deletes all TV programmes.
When the I n i t i a l S e t t i n g is completed, you must restart the Initializing setup.
Move
OK
OPTION
E
2
OK
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
Set ID
:1
Set ID
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
Yes
Mode Setting
: Home Use
Mode Setting
: Home Use
Initial Setting
1 MENU
Move
E
Input Label
: On
All: Off
user settings and channel settings
will
: 1be reset. Still continue?
No
Initial
Initial Setting
Setting
Select O P T I O N.
OK
Select I n i t i a l S e t t i n g.
OK
Select Y e s.
WATCHING TV / PROGRAMME CONTROL
OPTION
3
4
OK
Start Initial Setting.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
49
TO USE THE BLUETOOTH (ONLY 42/50PQ7***, 50/60PS8***)
Bluetooth?
Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various types of information devices such as computers, cell phones and PDAs, as well as digital appliances through wireless connection, without having to connect any cable, to enable data exchange.
With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset or receive
images(only JPEG), listen to music from the Bluetooth enabled cell phone using this TV.
• Communication Spec.: Bluetooth Specification Version 2.0 + EDR (Enhanced Data Rate)
• Output: Bluetooth Specification Power Class 2
• Maximum Coymmunication Range: Line of open sight approx. 10 m (30 ft)
• Frequency Band: 2.4 GHz band (2.4 GHz ~ 2.4835 GHz)
• Bluetooth Module: RBFS-C921A
• Compatible Bluetooth Profile: A2DP (Advanced Audio Distribution Profile)
OPP (Object Push Profile)
GAVDP (Generic Audio/Video Distribution Profile)
HSP (Headset Profile)
TO USE THE BLUETOOTH
Precautions when using the Bluetooth
Use within 10m(-45°~ 45°) range.
If you use the device out of the range or within the range with obstacles, it can result in communication
error.
G Communication error can occur depending on the surrounding devices.
G Products using the same frequency of 2.4 GHz (Wireless LAN, microwave oven etc.), can cause communication error by using the same frequency bandwidth.
G The device search time differs depending on the number of Bluetooth devices and the operating situation.
G The probability of search increases with less number of devices.
G Electromagnetic wave can be interfered with applicable wireless devices.
G Because applicable wireless devices have the possibility of electromagnetic wave interference, they cannot
provide services related to human life.
G You can only connect one Bluetooth device at a time.
G You cannot receive photos(only JPEG) or listen to music from other Bluetooth devices while using the
Bluetooth headset.
G For details of Bluetooth, refer to the user manual of the Bluetooth device.
G USB (Photo List, Music List, Movie List) and Bluetooth will not be supported at the same time.
G Operation is subject to the following two conditions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation (of the device).
G
QDID(Qualified Design Identity): B015112
50
0700
FCC ID: BEJRBFS-C921A
SETTING THE BLUETOOTH
If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images from an
external device and view them on the TV, listen to music from cell phone(Bluetooth device), you can use the
wireless communication without having to connect any cables.
O n”.
You can use the BLUETOOTH menu by selecting “O
O f f”.
If you do not want to use the Bluetooth function, select “O
If it is connected to the external Bluetooth device, you can select “Off” after disconnecting the device.
BLUETOOTH
OK
BLUETOOTH
Bluetooth
Bluetooth
: Off
: Off
Bluetooth
Bluetooth
TV PIN
: 0000
TV PIN
Move
OK
:Off
Off
: Off
On
:On
0000
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
Registered Bluetooth Device
Registered Bluetooth Device
My Bluetooth Info.
My Bluetooth Info.
Select B L U E T O O T H.
2
OK
Select B l u e t o o t h.
OK
Select O n or O f f.
TO USE THE BLUETOOTH
1 MENU
Move
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
51
TO USE THE BLUETOOTH
SET TV PIN
To accept connection from an external Bluetooth device or to connect to an external Bluetooth device, the PIN
needs to be entered.
For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the applicable
device.
The TV PIN is composed of numbers of up to 10 digits.
The TV PIN must have more than 1 digit.
BLUETOOTH
Move
Bluetooth
: On
TV PIN
PIN
TV
: 0000
0000
TVPIN
PIN
TV
0000
:: 0000
OK
Set TV PIN
Bluetooth Headset : Disconnected
0 0 0 0_
Bluetooth Headset : Disconnected
Registered Bluetooth Device
Registered Bluetooth Device
My Bluetooth Info.
My Bluetooth Info.
Delete
OK
Select B L U E T O O T H.
• Press the
button to delete digits
one by one.
2
Select T V P I N.
OK
3
BLUETOOTH
OK
: On
E
TO USE THE BLUETOOTH
1 MENU
Move
Bluetooth
OK
1
2
3
4
5
6
7
8
9
Select the desired PIN number.
0
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
52
BLUETOOTH HEADSET
When you select the Bluetooth headset, you can listen to the TV sound in the Bluetooth headset through
wireless communication.
You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of
the applicable device.
A maximum of 12 devices can be paired.
When the unit is searching for the Bluetooth headset, other buttons except for the “Stop” (OK button) do
not work.
Connecting a new Bluetooth headset
You can only search for the new Bluetooth headset only in the D i s c o n n e c t e d condition.
When you run the search, it will show you the list of all Bluetooth headsets responding.
After new Bluetooth device is searched, the PIN number is validated to connect the device. For details, refer to
the user manual of the applicable device.
4
Select B L U E T O O T H.
OK
1
2
3
4
5
6
7
8
9
0
2
OK
Select Bluetooth headset PIN number.
Refer to the user manual of the applicable device for the PIN number.
5
OK
Select B l u e t o o t h H e a d s e t.
Connect the Bluetooth headset.
3
OK
GREEN Search the Bluetooth headset.
TO USE THE BLUETOOTH
1 MENU
Connecting to Bluetooth headset already registered
Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top.
When connecting to the Bluetooth device already registered, you can select and connect directly without any
PIN validation.
1 MENU
2
OK
Select B L U E T O O T H.
Select B l u e t o o t h H e a d s e t.
4
OK
Message asking to connect the selected
Bluetooth headset will be displayed.
Select Y e s or N o.
5
OK
Connect the Bluetooth headset.
3
OK
Select the desired Bluetooth headset.
• After connecting/using the Bluetooth headset, the headset setting will be the D i s c o n n e c t e d condition
automatically when you turn off the power of the TV and then turn on.
• After connecting the Bluetooth headset, the TV speaker is switched to Mute condition and the sound
will only be generated from the headset.
53
TO USE THE BLUETOOTH
Disconnecting the Bluetooth headset during use
1 MENU
3
Select B L U E T O O T H.
OK
Disconnect the Bluetooth headset.
2
OK
OK
Select B l u e t o o t h H e a d s e t.
When requesting to connect to TV from the Bluetooth headset
TO USE THE BLUETOOTH
54
When the Bluetooth menu is "On" and there is a connection request
from the headset, this message is dispalyed.
Not all headsets support the this feature.(Refer to the user manual of
the applicable Bluetooth headset.)
1
OK
Do you want to use your headset?
Yes
No
Select Y e s or N o.
! NOTE
LG recommends the following headset models.
- Only Stereo : Sony Ericsson : HBH-DS980, Motorola : S9, Motorola : S605, Jabra : BT620S
There might be an audio delay, depending on the buffer memory size of the headset.
G The stereo/mono headset officially certified to be Bluetooth compatible can be searched and connected.
G The stereo/mono headset that supports the A2DP or HSP function among the Bluetooth devices can be connected.
G If the surrounding environment of the TV is as follows, the device may not be searched or connected properly.
- If there is strong electromagnetic wave.
- If there are many Bluetooth devices.
- If the headset is turned off, not in place or has an error.
- Because products such as microwave oven, wireless LAN, plasma light, gas range etc., use the same frequency range,
it can cause communication error.
G Only one stereo headset can be connected at once.
G Connection that is lost due to the TV being turned off etc. will not be automatically recovered. Try connecting the
applicable device again.
G Some operations can be slower while operating the headset.
G Even if you choose simplink Home Theater after using the headset during Simplink operation, the unit will not automatically switch to Home Theater speakers.
G When the headset connection continuously fails, pair the device one more time.
G The audio quality of mono headsets will not be as good as that for stereo headsets.
G Mono headsets may suffer from noise as the distance from the TV increases, because they use a different transmission method compared with stereo headsets.
G When a Bluetooth headset is in use, the Volume +/- and Mute keys do not work, and the Audio menu
returns to the default value and is disabled.
G Even if it is not in the registered device list, depending on a headset, it works if connected as shown below
when headset power off or on.
G With Bluetooth set to On, if any registered devices are turned on, the TV will switch to Bluetooth mode
automatically even though you are watching in another input mode. In this case, set Bluetooth to Off.
G
MANAGING REGISTERED BLUETOOTH DEVICE
If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used.
An additional device after registration of 12 devices deletes the existing list as stored order. Bluetooth device
names may be up to 14 characters long; the name will be truncated if more characters are used.
BLUETOOTH
Move
Bluetooth
: On
TV PIN
: 0000
BLUETOOTH
OK
Move
OK
Bluetooth
: On
Registered
TV PIN
: 0000 Bluetooth Device
00:0d:44:84:14:62
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
RegisteredBluetooth
BluetoothDevice
Device
Registered
RegisteredBluetooth
BluetoothDevice
Device
Registered
FreePulse_Wireless
My Bluetooth Info.
My Bluetooth Info.
LG L600V
E
E
Connect
Delete
1 MENU
TO USE THE BLUETOOTH
Select B L U E T O O T H.
2
OK
Select R e g i s t e r e d B l u e t o o t h D e v i c e.
3
OK
A
Check the registered Bluetooth device.
Connecting the registered Bluetooth stereo headset
1
Select the registered Bluetooth stereo headset you want.
2
BLUE Message asking to connect the selected Bluetooth headset will be displayed.
3
OK
A
Select Y e s or N o.
Deleting registered Bluetooth device
A
Disconnecting registered Bluetooth device
"Delete" will be available when selecting the device that
is not connected to the TV.
1
2
Select the Bluetooth device
you want to remove.
Message asking to delete the selectRED ed Bluetooth device will be displayed.
1
2
Select the Bluetooth device that is currently
connected to the TV.
BLUE
Disconnect the Bluetooth device.
3
OK
Select Y e s or N o.
55
TO USE THE BLUETOOTH
MY BLUETOOTH INFORMATION
This function provides the My Bluetooth Information to the user.
"Edit" will be available when TV is not connected with any device.
You can edit the My Device Name.
You can check the My Device Address.
BLUETOOTH
Move
BLUETOOTH
OK
Move
Bluetooth
: On
Bluetooth
: On
TV PIN
: 0000
TV PIN
: 0000
OK
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
Registered Bluetooth Device
Registered BluetoothMy
Device
Device Name
My
My Bluetooth
BluetoothInfo.
Info.
My
MyBluetooth
BluetoothInfo.
Info.
4 2 P Q 7 0 B R - T A
My Device Address
TO USE THE BLUETOOTH
0 0 : 0 5 : c 9 : f f : 0 0 f : 0 7
Edit
OK
1 MENU
Select B L U E T O O T H.
2
OK
Select M y B l u e t o o t h I n f o ..
3
OK
BLUE
You can use an the alphabet A to Z , the number 0
to 9 , +/ -, and blank.
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
56
RECEIVING PHOTOS THROUGH EXTERNAL
BLUETOOTH DEVICE
For details on how to send photos(only JPEG) from the external Bluetooth device to TV, refer to the user manual
of the applicable device.
Receiving
file(s)
F
1/3
G
E
Close
• When you select C l o s e with the
button, the OSD will disappear.
And when you press the O K button again, it will appear again.
■
(Rotate) : Rotate photos.
Rotates the photo 90° clockwise upon O K button on
(Rotate).
• The maximum accumulated size of the image(s) that can be received is 4MBytes.
• You cannot receive the image(s) while using the Bluetooth headset.
• You cannot receive the image(s) while listening to music from Bluetooth device.
• When the external Bluetooth device is currently sending the photo, press the R E T U R N button to stop
receiving the photo. All photos already received will be deleted as a result if press the R E T U R N button.
• With some Bluetooth devices, you may not be able to transmit an image (JPEG) file to the TV set.
• When you send photos via Bluetooth, the memory capacity supports up to 8M and 64 photos.
TO USE THE BLUETOOTH
Select the desired photos.
LISTENING TO THE MUSICS FROM EXTERNAL
BLUETOOTH DEVICE
For details on how to listen to the musics from the external Bluetooth device to TV, refer to the user manual of
the applicable device.
You should use the Bluetooth device supporting A2DP(as external device)
• With some Bluetooth devices, you may not be able to listen to music via the TV speaker system.
Back to TV
+ or - button to adjust the volume.
• Press the
• If you wish to switch the sound off, press the MUTE button.
• Press the R E T U R N button to return to normal TV viewing.
! NOTE
G
G
G
You cannot listen to music while using the Bluetooth headset.
You cannot listen to music while receiving image(s).
When listening to music with Bluetooth, variable/monitor out which is an audio out of TV does not work.
57
TO USE THE USB DEVICE (Except 42/50PQ1***)
When connecting a USB device
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu is activated or while the Bluetooth
Headset is connected.
In USB device, you can not add a new folder or delete the existing folder.
■ Here shown may be somewhat different from your TV.
1 Connect the USB device to the U S B
IN
jacks on the side of TV.
Divx (Except 42/50PQ3***).
USB IN
When removing the USB device
Select the USB Eject menu before removing the
USB device.
USB memory stick
DIO R
2
• This TV Supports on JPEG and MP3 and SD
Select P H O T O L I S T, M U S I C L I S T or
M O V I E L I S T(Except 42/50PQ3***).
1Q. MENU
Select Eject.
2
OK
TO USE THE USB DEVICE
58
PHOTO LIST
3
MUSIC LIST
MOVIE LIST
OK
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has
normal music files or image files.
G Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with
the Windows operating system. In case of a storage device formatted as a different utility programme which is
not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may
not be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G Maximum of 999 files and folders can be recognized.
G Data in a USB storage device cannot be aligned.
Up to 128 English characters can be recognized as a file name.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is
turned on.
G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
G TV need more time to detect if the storage size is bigger.
If the USB memory is connected in Standby Mode, power on time would be longer than without memroy.
G Any device with more than the recommended capacity may not work properly.
G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to
make it work properly.
G When the list menu is displayed for USB, the bluetooth function doesn't operate.
G
G
PHOTO LIST
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file
Baseline: Max 15360 x 8640
Min : 64 x 64
• Progressive spec out
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
• Non-supported files are displayed in the form of bitmap.
1 MENU
2
OK
Select U S B.
Select Photo List.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked photos
4
Corresponding buttons on the
remote control
3
PHOTO LIST
Page 2/3
No Marked
Up Folder
Drive1
KY107
2009/11/11
TO USE THE USB DEVICE
Screen Components
KY101
1366x768, 125KB
1
Up Folder
Navigation
Option
KY101
2009/11/11
KY108
2009/11/11
KY102
2009/11/11
KY109
2009/11/11
KY103
2009/11/11
KY110
2009/11/11
KY104
2009/11/11
KY111
2009/11/11
KY105
2009/11/11
KY112
2009/11/11
KY106
2009/11/11
KY113
2009/11/11
P
Page Change
MARK
Mark
Exit
4
59
TO USE THE USB DEVICE (Except 42/50PQ1***)
Photo Selection and PopUp Menu
PHOTO LIST
Page 2/3
No Marked
Up Folder
Drive1
KY107
2009/11/11
KY101
KY101
2009/11/11
KY108
2009/11/11
KY102
2009/11/11
KY109
2009/11/11
KY103
2009/11/11
KY110
2009/11/11
KY104
2009/11/11
KY111
2009/11/11
KY105
2009/11/11
KY112
2009/11/11
KY106
2009/11/11
KY113
2009/11/11
Drive1
1366x768, 125KB
Up Folder
Navigation
Option
Page Change
P
MARK
Mark
Exit
PHOTO LIST
Page 2/3
TO USE THE USB DEVICE
Up Folder
Drive1
KY107
2009/11/11
KY101
KY101
KY108
2009/11/11
2009/11/11
KY109
2009/11/11
2009/11/11
KY110
2009/11/11
KY104
2009/11/11
KY111
2009/11/11
KY105
2009/11/11
KY112
2009/11/11
KY106
2009/11/11
KY113
2009/11/11
KY102
KY103
2009/11/11
1366x768, 125KB
View
Mark All
Delete
Close
1366x768, 125KB
Up Folder
Navigation
1
Option
P
Page Change
MARK
Mark
Exit
Select the target folder or drive.
• Use the P
2
3
4
60
View : Display the selected
item.
G M a r k A l l : Mark all photos on
the screen.
G Unmark All : Deselect all
marked photos.
G D e l e t e : Delete the selected
photo item.
G C l o s e : Close the pop-up
menu.
G
No Marked
Select the desired photos.
OK
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
PHOTO LIST
Page 2/3
No Marked
Up Folder
Drive1
KY107
2009/11/11
KY101
2009/11/11
KY108
2009/11/11
KY102
2009/11/11
KY109
2009/11/11
KY103
2009/11/11
KY110
2009/11/11
KY104
2009/11/11
KY111
2009/11/11
KY105
2009/11/11
KY112
2009/11/11
KY106
2009/11/11
KY113
KY101
1366x768, 125KB
Up Folder
Navigation
P
Option
Page Change
MARK
2009/11/11
Mark
Exit
Page 2/3
No Marked
Up Folder
Drive1
KY107
2009/11/11
KY108
2009/11/11
KY101
KY101
2009/11/11
1366x768, 125KB
KY102
KY109
2009/11/11
2009/11/11
KY110
2009/11/11
2009/11/11
Delete
KY111
2009/11/11
2009/11/11
KY112
2009/11/11
2009/11/11
KY113
2009/11/11
2009/11/11
View
KY103
Mark All
KY104
1366x768, 125KB
Close
KY105
1/17
Up Folder
Navigation
KY106
P
Option
Page Change
MARK
Mark
Slideshow
BGM
Delete Option
Hide
Exit
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
Press the R E T U R N button to move to the previous menu screen.
1
2
3
Select the target folder or drive.
OK
OK
4
5
TO USE THE USB DEVICE
PHOTO LIST
Select the desired photos.
Show the PopUp menu.
Select V i e w
OK
The selected photo is displayed in
full size.
61
TO USE THE USB DEVICE (Except 42/50PQ1***)
6
OK
Select the Slideshow , B G M,
D e l e t e , Option or H i d e
• Use
(Rotate),
button to select the previous or
next photo.
1/17
Slideshow
BGM
Delete Option
Hide
• Use
button to select and control the
menu on the full-sized screen.
TO USE THE USB DEVICE
G
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. When selected, the selected
photos are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M : Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n .
G
( R o t a t e ) : Rotate photos.
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
G
D e l e t e : Delete photos.
G
O p t i o n : Set values for S l i d e S p e e d and M u s i c F o l d e r.
■ Use
button and O K button to set values. Then go to
OK
and press O K to save the settings.
■ You cannot change M u s i c F o l d e r while BGM is playing.
Press F G to set the time interval between
slides.
Slide Speed
Fast
Music Folder
Music
OK
G
62
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button
to display.
Cancel
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
MUSIC (*.MP3) supporting file
Bit rate : 32k ~ 320kbps
Sampling rate MPEG1 layer 3: 32k ~ 48kHz
TO USE THE USB DEVICE
Screen Components
1 MENU
2
Select U S B.
OK
OK
Select Music List.
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
title
4
3
MUSIC LIST
Page 2/3
No Marked
Title
Music
Duration
Up Folder
Corresponding buttons on
the remote control
00:00 / 03:28
1
Up Folder
Navigation
Option
P
Page Change
MARK
Mark
Exit
4
63
TO USE THE USB DEVICE (Except 42/50PQ1***)
Music Selection and PopUp Menu
As shown , up to 6 music titles are listed per page.
MUSIC LIST
Page 2/3
No Marked
Duration
Title
Music
Up Folder
P l a y (During stop) : Play the selected music
titles.
Once a music finishes playing, the next selected one will be played. When there are no
selected music titles to play, the next one in
the current folder will be played.
G P l a y M a r k e d : Play the selected music titles.
Once a music finishes playing, the next selected one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
00:00 / 03:28
Up Folder
Navigation
P
Page Change
MARK
Mark
Exit
TO USE THE USB DEVICE
MUSIC LIST
Page 2/3
No Marked
Duration
Title
Music
Up Folder
4395KB 1Kbps
Play
Play with Photo
Mark All
Delete
00:00 / 03:28
Close
Up Folder
Navigation
1
2
3
4
64
Option
Option
P
Page Change
MARK
Mark
Exit
Select the target folder or drive.
Select the desired music title
OK
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
• Use the P
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in
the folder will be played in sequence.
■
If you don't press any button for a while during the playing, the play information box (as shown in the below) will
float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period
of time.
! NOTE
When music is playing,
is displayed in back of the music title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G This TV can not play music files less than 32 Kbytes.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
TO USE THE USB DEVICE
65
TO USE THE USB DEVICE (Except 42/50PQ1***)
MOVIE LIST (Except 42/50PQ3***)
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and Divx file.
Supports up to four drives.
TO USE THE USB DEVICE
MOVIE(*.avi/*.Divx) supporting file
Video format : MPEG1 , MPEG2, MPEG4 (Doesn’t support Microsoft MPEG4-V2, V3), DivX 3.xx , DivX
4.xx, DivX 5.xx , DivX VOD ( DRM ) , XviD, DivX 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital.
Sampling frequency : 32k ~ 48kHz
Bit rate : 32k ~ 320kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• Some user-created subtitles may not work properly.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• The video file and the subtitle file must be located in the same folder.
• The name of the video file and the subtitle file must be the same to view the subtitles normally.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Playing a video via a USB connection that does not support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
• DivX may not be played depending on its types or recording methods.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Max bitrate of playable DivX is 4Mbps.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30
FPS (720*480) depending on Resolution.
• Files of 25 FPS or 30 FPS of higher may not be played properly.
• Files encoded with GMC(Global Motion Compensation) may not be played.
• Certain video files created with an encoder may not be played.
• Some of subtitle files that are not ordered in sequence may not be display.
Extension name
Video Codec
Audio Codec
mpg, mpeg, mpe, vob, dat
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
MPEG 4-SP, MPEG4-ASP, Divx 3.xx,Divx 4.xx,
Divx 5.xx, Divx 6.xx(Playback),
AC3,MPEG,MP3,PCM
Avi, divx, m4v
Xvid
66
Resolution
720x576@25p
720x480@30p
Screen Components
1 MENU
2
OK
Select U S B.
OK
Select Movie List.
2
1
Moves to upper level folder
2
Current page/Total pages
MOVIE LIST
3
Page 2/3
No Marked
Movie
Total number of marked movie
title
4
Corresponding buttons on
the remote control
Title
Duration
Up Folder
720x576 , 120KB
1
Up Folder
Navigation
Option
P
Page Change
MARK
Mark
Exit
4
TO USE THE USB DEVICE
3
! NOTE
G
G
G
A DivX movie file and its subtitle file must be located in the same folder.
A video file name and its subtitle file name must be identical for it to be displayed.
Use the left/right ( / ) keys to move to a specific frame forward or backward while playing a movie.
(The left/right ( / ) keys may not work properly for some files while playing a movie.)
67
TO USE THE USB DEVICE (Except 42/50PQ1***)
Movie Selection and PopUp Menu
As shown , up to 6 movie titles are listed per page.
MOVIE LIST
Page 2/3
No Marked
Duration
Title
Movie
Up Folder
720x576 , 120KB
Up Folder
Navigation
P
Page Change
MARK
Mark
Exit
TO USE THE USB DEVICE
MOVIE LIST
Page 2/3
No Marked
Duration
Title
Movie
Up Folder
4395KB 1Kbps
Play
Mark All
Delete
720x576 , 120KB
Close
Up Folder
Navigation
1
2
3
4
68
Option
Option
P
Page Change
MARK
Mark
Select the target folder or drive.
P l a y : Play the selected movie titles. Divx Play
is executed while screen changes.
G P l a y M a r k e d : Play the selected movie titles.
Once a movie finishes playing, the next selected one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing movie titles.
G M a r k A l l : Mark all movie titles in the folder.
G U n m a r k A l l : Deselect all marked movie titles.
G D e l e t e : Delete the selected movie titles.
G C l o s e : Close the pop-up menu.
G
Exit
• In the case of files not supported, a message
regarding non-supported file is displayed.
This file is invalid.
Select the desired movie titles.
OK
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
DivX Audio Language & Subtitle Language
Picture Size
F
Full Screen
Subtitle Language
---
Audio Language
1/1
Subtitle
---
. Language
Subtitle
Language
Null
. Position
French, Spanish, Catalan Basque, Portuguese, Italian, Albanian,
Rhaeto-Romanic, Dutch, German, Danish, Swedish,
Norwegian, Finnish, Faroese, Icelandic, Irish, Scottish, English
Latin2
Czech, Hungarian, Ploish, Romanian, Croatian,
Slovak, Slovenian, Sorvian
Latin4
Estonian, the Baltic languages Latvian(Lettish) and
Lithuanian, Greenlandic and Lappish
Latin5
English, Trukish
Cyrillic
Bulgarian, Byelorussian, Macedonian, Russian, Serbian
and pre-1990 (no ghe with upturn) Ukrainian
G
Latin 1
. Sync
Latin1
Greek
---
Close
English, modern Greek
Hebrew
English, modern Hebrew
Chinese
Chinese
Thai
Thai
Arabic
English, Arabic
• When DivX is playing, if you press the R E D button, this
1
Select the desired option.
message is displayed.
• P i c t u r e S i z e : Selects your desired picture format dur-
ing movie play.
• A u d i o L a n g u a g e & S u b t i t l e L a n g u a g e : Changes the
Select P i c t u r e S i z e , S u b t i t l e L a n g u a g e , Language Group of the audio/subtitle during movie play.
A u d i o L a n g u a g e , S u b t i t l e , L a n g u a g e , • S y n c : Adjusts the time synchronisation of the subtitle from
-10 secs ~ +10 secs by steps of 0.5 secs during movie play.
S y n c or P o s i t i o n.
• P o s i t i o n : Changes the position of the subtitle either up
or down during movie play.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
TO USE THE USB DEVICE
2
Some special characters are not supported in subtitles.
G HTML tags are not supported in subtitles.
G Subtitles in languages other than the supported languages are not available.
G
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF ->
FFFFF ->FFFFFF .
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG
-> GGGGGG.
■
II
During playback, press the P a u s e ( I I) button.
■ Still screen is displayed.
■
P L A Y ( G)
Pressing these buttons repeatedly increases the fast forward/reverse speed.
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y( G) button to return to normal playback.
69
TO USE THE USB DEVICE (Except 42/50PQ1***)
DIVX REGISTRATION CODE (Except 42/50PQ3***)
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or
purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX
DivX Reg.
Reg. Code
Code
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Deactivation
Move
i
OK
DivX(R) Video On Demand
Your registration code is : xxx xxxxxxx
To learn more visit www.divx.com/vod
Close
1 MENU
Select U S B.
2
TO USE THE USB DEVICE
OK
Select Divx Reg. Code.
3
OK
Display D i v x R e g . C o d e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
“ DivX Certified to play DivX video, including premium content”
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an
official DivX Certified device that plays DivX video. Visit www.divx.com for more
information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play DivX Video-on-Demand (VOD) content. To generate the registration code,
locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code
to complete the registration process and learn more about DivX VOD.
! NOTE
Supported movie file
Resolution : under 720x480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
Video Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx,
DivX5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback)
G When loading, some buttons may not work.
G If you use the DivX registration code of another device, the rented or purchased DivX file cannot be
played. Therefore always use the DivX registration code assigned to this product.
G
70
DEACTIVATION (Except 42/50PQ3***)
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
OK
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
Deactivation
Deactivation
DivX Reg. Code
Deactivation
Deactivation
Move
OK
DivX(R) Video On Demand
i Do you want to deactivate your device?
Yes
TO USE THE USB DEVICE
1 MENU
No
Select U S B.
2
OK
Select Deactivation.
OK
Select Y e s or N o.
3
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
71
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 1 6 : 9, J u s t S c a n,
O r i g i n a l, 4 : 3, 1 4 : 9, Z o o m and C i n e m a Z o o m 1.
If a fixed image is displayed on the screen for a long time, that fixed image
may become imprinted on the screen and remain visible.
1Q. MENU
Select A s p e c t R a t i o.
• You can also adjust Aspect Ratio in the P I C-
T U R E or Q. Menu menu.
2
Select the desired picture format.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs)
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture,
You can see the noise at the edge.
Just Scan
72
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ration, gray bars will appear
on both the left and right of the screen.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
• Cinema Zoom1
Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended
and vertically cropped. The picture adopting a
compromise between alteration and screen
coverage.
The adjustment range is 1-16.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
G
G
G
PICTURE CONTROL
! NOTE
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m, C i n e m a Z o o m 1 in Component, HDMI
mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB mode only.
In HDMI/Component (over 720p) mode, J u s t S c a n is available.
73
PICTURE CONTROL
ENERGY SAVING
POWER SAVING (Only 42/50PQ1*** )
It reduces the plasma display’s power consumption.
The default factory setting complies with the Energy
Star requirements and is adjusted to the comfortable
level to be viewed at home.
You can increase the brightness of your screen by
adjusting the Energy Saving level or by setting the
Picture Mode.
PICTURE
Move
Aspect Ratio
PICTURE
OK
: 16:9
: :Intelligent
Sensor
Off
Intelligent Sensor
: Vivid
Off
• Contrast
100
Minimum
• Brightness
50
Medium
• Sharpness
70
Maximum
• Colour
70
• Tint
0
R
F
High
Power
PowerSaving
Saving
G
Picture Mode
PICTURE CONTROL
2
OK
3
OK
: :Off
Off
Off
: Vivid
Minimum
100
Medium
• Brightness
50
Maximum
• Sharpness
70
• Colour
• Tint
G
70
0
R
G
E
1 MENU
Select P I C T U R E.
Select
OK
: 16:9
• Contrast
E
1 MENU
Move
Aspect Ratio
Energy
EnergySaving
Saving
Picture Mode
This function allows you to reduce the power
consumption of the TV.
E n e r g y S a v i n g.
Select I n t e l l i g e n t S e n s o r,
O f f , M i n i m u m , M e d i u m or
Maximum.
2
OK
3
OK
Select P I C T U R E.
Select P o w e r S a v i n g .
Select O f f , M i n i m u m , M e d i u m or
Maximum.
When the I n t e l l i g e n t S e n s o r is selected,
4
Select L o w , M i d d l e or H i g h.
(Except 42/50PQ1*** )
• When the Intelligent sensor function is on, the
most suitable picture is automatically adjusted
according to the surrounding conditions.
• I n t e l l i g e n t S e n s o r : Adjusts picture according to the surrounding conditions.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
74
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid
Standard
Cinema
Sport
Game
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
PICTURE
Move
PICTURE
OK
Aspect Ratio
: 16:9
Aspect Ratio
Energy Saving
Picture Mode
: On
: Vivid
Picture
Picture Mode
Mode
• Contrast
Energy Saving
• Contrast
100
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
0
R
• Tint
G
OK
: On
:: Vivid
Vivid
• Brightness
• Tint
Vivid
100Standard
50Cinema
70Sport
70Game
0 R
G
E
E
Select P I C T U R E.
• P i c t u r e M o d e adjusts the TV for the best pic-
2
OK
3
OK
Select P i c t u r e M o d e.
Select V i v i d, S t a n d a r d, C i n e m a,
S p o r t or G a m e.
PICTURE CONTROL
1 MENU
Move
: 16:9
ture appearance. Select the preset value in the
P i c t u r e M o d e menu based on the programme
category.
• You can also adjust P i c t u r e M o d e in the Q .
M e n u.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
75
PICTURE CONTROL
Auto Colour Tone Control (Warm/Medium/Cool)
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to
cool to see less intense colours with more blue.
PICTURE
Move
PICTURE
OK
OK
E
E
• Contrast
Move
100
• Brightness
• Sharpness
70
• Colour
70
• Tint
• Contrast
50
0
• Brightness
• Sharpness
• Colour
R
• Tint
G
100
Colour Temperature
50
Dynamic Contrast
70
Dynamic Colour
70
Noise
0 Reduction
• Advanced Control
Gamma
• Advanced Control
• Picture Reset
• Picture Reset Black Level
Screen
Screen
F
Medium
G
High
High
Medium
Medium
Auto
Film Mode
Off
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select C o l o u r T e m p e r a t u r e.
3
4
Select either C o o l, M e d i u m or W a r m.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
76
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
• Contrast
Adjusts the difference between light and dark levels in the picture.
• Brightness
Increases or decreases the amount of white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
• Colour
Adjusts intensity of all colours.
• Tint
Adjusts the balance between red and green levels.
PICTURE
Move
PICTURE
OK
Aspect Ratio
: 16:9
Aspect Ratio
Energy Saving
Picture Mode
: On
: Vivid
Picture
Picture Mode
Mode
Energy Saving
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
• Tint
0
R
• Tint
G
2
70Sport
70Game
0 R
G
Select P I C T U R E.
OK
Select P i c t u r e M o d e.
OK
Select V i v i d, S t a n d a r d, C i n e m a, S p o r t or G a m e
OK
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s, C o l o u r or T i n t.
OK
Make appropriate adjustments.
3
Vivid
Vivid
100Standard
50Cinema
E
E
1 MENU
: On
:: Vivid
Vivid
• Contrast
100
OK
PICTURE CONTROL
• Contrast
Move
: 16:9
4
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
You cannot adjust colour, sharpness and tint in the RGB-PC mode.
77
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
Dynamic Contrast(Off/Low/High)
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The resolution of gradation is
improved by making bright parts brighter and dark parts darker. This feature refers to dynamic contrast, and enhances
the feeling of presence that contrast controls are intended to give by using dimming and other input signals.
Dynamic Colour(Off/Low/High )
Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance
so that red, blue, green and white look more vivid.
N o i s e R e d u c t i o n( O f f / L o w / M e d i u m / H i g h )
Reduces screen noise without compromising video quality. This feature is also used to reduce recursive noise and MPEG
noise (Mosquito/Block).
Gamma(Low/Medium/High)
You can adjust brightness of dark area and middle gray level area of the picture.
• Low : Make dark and middle gray level area of the picture brighten.
• Medium: Express original picture gradation.
• High: Make dark and middle gray level area of the picture darken.
PICTURE
Move
PICTURE
OK
OK
E
E
PICTURE CONTROL
• Contrast
Move
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
• Tint
70
0
• Colour
R
• Tint
G
100
Colour Temperature
50
Dynamic Contrast
70
Dynamic Colour
70
Noise
0 Reduction
• Advanced Control
Gamma
• Advanced Control
• Picture Reset
• Picture Reset Black Level
Screen
Screen
Medium
F
High
G
High
Medium
Medium
Auto
Film Mode
Off
Close
1 MENU
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
3
OK
Select D y n a m i c C o n t r a s t, D y n a m i c C o l o u r, N o i s e R e d u c t i o n or G a m m a.
4
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
78
ADVANCED - BLACK(DARKNESS) LEVEL
Makes dark parts on the screen look darker.
This function works in the following mode: TV, AV, COMPONENT or HDMI.
PICTURE
Move
PICTURE
OK
OK
E
E
• Contrast
Move
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Tint
0
• Colour
R
• Tint
G
100
Colour Temperature
50
Dynamic Contrast
70
Dynamic Colour
70
• Advanced Control
Gamma
• Picture Reset
• Picture Reset Black Level
Screen
High
High
Noise
0 Reduction
• Advanced Control
Screen
Medium
Medium
Medium
F
Film Mode
Low
G
Off
Close
• L o w : The reflection of the screen gets darker.
• H i g h : The reflection of the screen gets
Select P I C T U R E.
brighter.
2
• A u t o : Realizing the black level of the screen
OK
Select A d v a n c e d C o n t r o l.
OK
Select B l a c k L e v e l.
3
and set it to High or Low automatically.
PICTURE CONTROL
1 MENU
4
Select L o w or H i g h.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
79
PICTURE CONTROL
ADVANCED - FILM MODE
Makes video clips recorded in film look more natural.
This feature operates only in TV, AV and Component 480i/576i mode.
PICTURE
Move
PICTURE
OK
OK
E
E
• Contrast
Move
100
• Contrast
100
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
70
• Colour
70
• Colour
70
• Tint
0
R
• Tint
G
50
0
• Advanced Control
• Advanced Control
• Picture Reset
• Picture Reset
Screen
Screen
Colour Temperature
Medium
Dynamic Contrast
High
Dynamic Colour
High
Noise Reduction
Medium
Gamma
Medium
Black Level
Film Mode
Auto
F
Off
G
Close
PICTURE CONTROL
1 MENU
2
Select P I C T U R E.
OK
Select A d v a n c e d C o n t r o l.
OK
Select F i l m M o d e.
3
4
Select O n or O f f.
5
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
80
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
E
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
70
• Tint
0
i
R
R
0
G
• Advanced Control
• Picture Reset
Screen
• Colour
70
Resetting
video configuration...
• Tint
G
• Advanced Control
• Picture Reset
Screen
PICTURE CONTROL
1 MENU
OK
E
• Contrast
Move
Select P I C T U R E.
2
OK
Select P i c t u r e R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
81
PICTURE CONTROL
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a
ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the
screen for prolonged periods.
Normal
If image sticking is never a problem, ISM is not necessary - set to Normal.
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with White Wash.
Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Colour Wash
The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to
sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating.
OPTION
Move
Menu Language
OPTION
OK
: English
Menu Language
Input Label
OK
: English
Input Label
PICTURE CONTROL
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
ISM Method
Method
ISM
:1
Normal
:: Normal
Set ID
:1
Demo Mode
: Off
Demo Mode
: Home Use
Mode Setting
Mode Setting
Select O P T I O N.
: On
:: Normal
Normal Normal
Orbiter
ISM
ISM Method
Method
E
1 MENU
Move
: Off
E
: Home UseColour Wash
White Wash
• If you do not need this function, set N o r m a l .
2
Select I S M M e t h o d.
OK
3
Select N o r m a l , O r b i t e r , C o l o u r W a s h or W h i t e
Wash.
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
82
DEMO MODE
Except 50/60PS8***
Only 50/60PS8***
Use it to see the difference between XD Demo on
and XD Demo off.
Display the slide show to explain the various logo of
this TV.
It is not possible to use D e m o M o d e in H o m e U s e mode.
In S t o r e D e m o, D e m o M o d e is automatically set to O n.
Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o
M o d e does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in D e m o
M o d e.
OPTION
Move
Menu Language
OK
: English
Input Label
SIMPLINK
: On
Key Lock
: Off
Set ID
:1
ISM Method
: Normal
Demo
DemoMode
Mode
: :Off
Off
Off
: Home Use
On
Mode Setting
E
OPTION
Move
Menu Language
XD ON
XD OFF
SIMPLINK
: On
Key Lock
: Off
Set ID
:1
ISM Method
: Normal
Off
:: Off
On(LED On)
On(LED
On(LED On)
On)
: Home Use
On(LED Off)
Mode Setting
E
2
1 MENU
Select OPTION.
2
OK
OK
Select D e m o M o d e.
3
3
OK
Select O n or O f f.
To stop the D e m o M o d e ,
press any button.
OK
4
OK
Select Demo Mode.
PICTURE CONTROL
Select O P T I O N.
: English
Input Label
Demo
Demo Mode
Mode
1 MENU
OK
Select O n ( L E D O n ) or O n ( L E D
O f f ) to show the various logo of
TV.
Return to TV viewing.
If you want to stop the demo, press any
+ , - butbutton. (except for MUTE,
ton)
83
PICTURE CONTROL
MODE SETTING
We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is an optimal setting for displaying at stores.
Mode Setting
OPTION
Move
Menu Language
OK
Selecting the environment.
Choose the setting mode you want.
: English
Input Label
SIMPLINK
: On
Key Lock
: Off
Set ID
:1
Select [Home Use] to use this TV at home.
ISM Method
: Normal
To use this TV at store, select [Store Demo].
Demo Mode
Mode Setting
Setting
Mode
: Off
Home Use
Use
:: Home
Store Demo
Home Use
E
1 MENU
Select O P T I O N.
PICTURE CONTROL
2
OK
Select M o d e S e t t i n g.
3
Select S t o r e D e m o or H o m e U s e .
OK
4
OK
Save.
• Press the R E T U R N button to return to normal TV viewing.
84
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time
the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments
for each programme.
AUDIO
Move
Move
Auto Volume
: Off
Auto Volume
: Off
Clear Voice II
: Off
Clear Voice II
: Off
• Level
Balance
Sound Mode
3
-
+
0
L
R
• Level
Balance
Sound Mode
: Standard
OK
Off
On
On
3
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
AUDIO
OK
E
Select A U D I O.
2
Select A u t o V o l u m e.
SOUND & LANGUAGE CONTROL
OK
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
85
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; S t a n d a r d, M u s i c, C i n e m a, S p o r t or G a m e and you can also
adjust T r e b l e, B a s s.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound
options based on the programme content.
S t a n d a r d, M u s i c, C i n e m a, S p o r t and G a m e are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Auto Volume
: Off
Clear Voice II
: Off
• Level
Balance
Sound Mode
AUDIO
OK
3
-L
R
+
0
L
R
: Off
Clear Voice II
: Off
• Level
Balance
Sound Mode
Standard
: :Standard
3
-
0
L
: :Standard
Standard
OK
+
R
Standard
Standard
• SRS TruSurround XT : Off
: Off
• SRS TruSurround XT
Music
• Treble
50
• Treble
50
Cinema
• Bass
50
• Bass
50
Sport
E
E
SOUND & LANGUAGE CONTROL
1 MENU
Move
Auto Volume
Select A U D I O.
Game
• You can also adjust S o u n d M o d e in the Q .
M e n u.
2
OK
Select S o u n d M o d e.
3
OK
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
86
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
: Off
Clear Voice II
: Off
Clear Voice II
: Off
• Level
Balance
Sound Mode
3
-
+
0
L
R
• Level
Balance
Sound Mode
: Standard
50
E
2
OK
3
OK
-
+
R
0 L
: Standard • SRS TruSurround XT
Off
E
• Bass
3
OK
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
Close
• SRS TruSurround XT : Off
••Treble
Treble 5050
1 MENU
Move
E
AUDIO
4
Select A U D I O.
OK
Select T r e b l e , B a s s.
OK
Make appropriate adjustments.
5
Select S o u n d M o d e.
6
Select S t a n d a r d , M u s i c ,
C i n e m a , S p o r t or G a m e.
OK
• Press the R E T U R N button to move to the previous menu screen.
SRS TRUSURROUND XT
Select this option to sound realistic.
1 MENU
Select A U D I O.
2
OK
Select S R S T r u S u r r o u n d X T.
OK
Select O n or O f f.
S R S T r u S u r r o u n d X T : TruSurround XT is a
patented SRS technology that solves the problem of playing 5.1 multicannel content over two
speakers.
3
SOUND & LANGUAGE CONTROL
• Press the M E N U button to return to normal TV viewing.
4
OK
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
87
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Auto Volume
: Off
Clear Voice
Voice IIII
Clear
: Off
: Off
• Level
Balance
Sound Mode
AUDIO
OK
3
-
+
0
L
R
: Off
Clear Voice II
: Off
: Off
• Level
Balance
Sound Mode
: Standard
3
-
0
L
OK
Off
Off
On
+
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
E
1 MENU
Move
Auto Volume
Select A U D I O.
O n” for C l e a r V o i c e I I, S R S
• If you select “O
SOUND & LANGUAGE CONTROL
T r u S u r r o u n d X T feature will not work.
2
OK
Select C l e a r V o i c e I I.
3
OK
Select O n or O f f.
Adjustment for Clear Voice Level With selecting On
4
OK
Select L e v e l.
OK
Make desired adjustment.
5
6 ’.
• Select levels from ‘-- 6’ to ’6
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
88
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume
: Off
Clear Voice II
: Off
• Level
30L
Balance
Sound Mode
OK
R
: Standard
OK
Clear Voice II
: Off
• Level
Balance
Sound Mode
30L
: Standard
OK
+
R
Balance
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
0
F
L
R
Close
E
Select A U D I O.
Select B a l a n c e.
3
OK
G
SOUND & LANGUAGE CONTROL
2
Move
: Off
+
E
1 MENU
AUDIO
Auto Volume
Make desired adjustment.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
89
SOUND & LANGUAGE CONTROL
SELECTING AUDIO OUT (Except 42/50PQ1***)
Select M o n i t o r O u t or V a r i a b l e o u t to connect the audio outputs.
Monitor Out
It sounds connected to AV eqiupment input including exterior amp.
The level of the sound is always regular, regardless of the volume setup of the set. Thus the level of the sound from
an exterior equpment can be controled by adjusting the volume of the exterior equipment.
Variable out
It sounds connected to AV eqiupment input including exterior amp.
Sound can be adjusted depending on the volume setup of the set. Thus the level of the sound from the exterior
equipment can be controled either by the exterior equipment or the volume setup of the set.
AUDIO
Move
AUDIO
OK
E
Sound Mode
Move
0
R
: Standard
Auto
Balance
Volume
: Off
Clear
SoundVoice
Mode
II
: Off
Standard
• SRS TruSurround XT : Off
• Treble
50
Balance
• Bass
50
Sound Mode
R
SRS TruSurround
•Level
0 L XT : OffR
R
0L
• Treble
50
• Bass
: Standard
50
TV Speaker
: On
TV Speaker
•: On
Treble
Audio
Audio Out
Out
:: Monitor
Monitor Out
Out
Audio Out
•: Monitor
Bass
50
Out
E
SOUND & LANGUAGE CONTROL
2
0
L
TruSurround XT : Off
Reset
• •SRS
• Reset
1 MENU
OK
E
Balance
L
50
Monitor
Monitor Out
Out
Variable Out
Select A U D I O.
OK
Select A u d i o O u t .
OK
Select M o n i t o r O u t or V a r i a b l e O u t.
3
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
90
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
OK
AUDIO
E
0L
Sound Mode
Move
OK
E
Balance
R
: Standard
• SRS TruSurround XT : Off
Auto
Balance
Volume
: Off
Clear
SoundVoice
Mode
II
: Off
Standard
0L
R
• Treble
50
SRS TruSurround
•Level
0 L XT : OffR
R
Balance i Resetting• sound
0 L configuration...
Treble mode
50
• Bass
50
Sound Mode
Reset
•• Reset
• Bass
: Standard
50
• Reset
Reset
TruSurround XT : Off
• •SRS
TV Speaker
: On
TV Speaker
•: On
Treble
Audio Out
: Monitor Out
Audio Out
•: Monitor
Bass
50
Out
50
E
1 MENU
2
OK
Select A U D I O.
SOUND & LANGUAGE CONTROL
Select R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
91
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In A V, C o m p o n e n t, R G B and H D M I with HDMI to DVI cable, the TV speaker can be operational even when
there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
AUDIO
Move
OK
AUDIO
E
Sound Mode
0L
R
: Standard
Balance
Sound Mode
SOUND & LANGUAGE CONTROL
2
OK
0L
OK
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
1 MENU
Move
E
Balance
• Reset
Off
TV Speaker
Speaker
TV
On
:: On
TVSpeaker
Speaker
TV
On
::On
Audio Out
: Monitor Out
Audio Out
On
: Monitor On
Out
Select A U D I O.
Select T V S p e a k e r.
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
92
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output
the TV speaker.
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1Q. MENU
2
Select A U D I O.
Select the sound output.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
SOUND & LANGUAGE CONTROL
A
93
SOUND & LANGUAGE CONTROL
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
SOUND & LANGUAGE CONTROL
94
1
When NICAM mono is received, you can select N I C A M M O N O.
2
When NICAM stereo is received, you can select N I C A M M O N O or N I C A M S T E R E O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or N I C A M M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
ON-SCREEN MENU LANGUAGE SELECTION
The installation setup menu appears on the TV screen when it is switched on for the first time.
1
OK
Select your desired language.
* If you want to change Language selection
1
MENU
Select O P T I O N.
2
Select M e n u L a n g u a g e.
OK
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL
Select your desired language.
OK
! NOTE
G
If you do not finish the set-up I n s t a l l a t i o n S e t u p by pressing R E T U R N or if you time out on the
OSD (On Screen Display) the installation menu will continuously appear until the set up is completed
whenever the TV is switched on.
95
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is unplugged, reset the clock.
TIME
Move
OK
1 MENU
TIME
Move
Clock
Clock
Clock
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
OK
Hour
16
Minute
09
Close
Select T I M E.
TIME SETTING
2
OK
Select C l o c k.
3
OK
Select H o u r or M i n u t e.
4
Set the H o u r or M i n u t e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
96
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
TIME
Move
TIME
OK
Clock
Move
Clock
OK
23:59
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: OffHour
Minute
F
Off
G
00
00
Programme
1
Volume
30
Close
1 MENU
2
OK
Select T I M E.
When the O n T i m e is selected,
3
OK
Select H o u r, M i n u t e,
P r o g r a m m e or V o l u m e .
TIME SETTING
Select O f f T i m e or O n T i m e.
4
Set the hour, Minute, Programme, Volume .
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
97
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1Q. MENU
2
Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 M i n.
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the T I M E menu.
TIME SETTING
98
TELETEXT
This feature is not available in all countries.
1
2
3
1
Teletext is a free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
4
5
6
4
5
6
7
8
9
7
8
9
0
Q.VIEW
LIST
0
Q.VIEW
MUTE
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number
of pages which are selected by directly entering the corresponding
page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last
page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on
the screen headline. The first page number indicates your selection,
while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode
reappears.
P
Q. MENU MENU
ENERGY SAVING
AV MODE
2
3
OK
RETURN
MUTE
P
A
G
E
P
AV MODE
MARK
P
A
G
E
FAV
P
A
G
E
MUTE
OK
MENU
OK
RETURN
FREEZE
MENU
1
2
3
4
5
6
RETURN
7
8
9
FAV
LIST
0
Q. VIEW
FAV
Q.MENU
Q.MENU FREEZE
MARK
FREEZE
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
TOP TEXT
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
A
Direct page selection
2
3
TELETEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
99
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
i
A Index
Select the each index page.
Text Option
Index
Time
A Time
When viewing a TV programme, press this button to display the time at the top right hand
corner of the screen. Press this button again to remove the display. In the teletext mode,
press this button to select a sub page number. The sub page number is displayed at the
bottom of the screen. To hold or change the sub page, press the RED/GREEN, P /
or
NUMBER buttons.
Press again to exit this function.
Hold
Reveal
Update
Close
TELETEXT
A Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive. To continue press this button again.
?
A Reveal
Press this button to display concealed information, such as solutions to riddles or puzzles.
Press this button again to remove the information from the display.
A Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left
hand corner of the screen. When the updated page is available then display will change to the page number. Press
this button again to view the updated teletext page.
100
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Install new batteries.
A
The remote control
does not work
Is the sleep timer set?
Check the power control settings. Has the Power supply been interrupted.
A The TV goes into Standby mode automatically if no signal is received and no
operation is performed for 15 minutes.
A
Power is suddenly
turned off
A
The video function does not work.
Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A
No picture & No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No or poor colour
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
A
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
APPENDIX
Horizontal/vertical bars
or picture shaking
A
A
Check antenna (Change the position of the antenna).
A
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can
result. Please use the latest cables that support at least HDMI version 1.3.
101
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
Unusual sound from
inside the TV
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when
connecting HDMI
or USB
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
A
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
APPENDIX
102
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
There is a problem with PICTURE settings.
When the user changes
the picture settings, the
TV automatically
converts back to the
initial settings after a
certain period of time.
A
It means that the TV is currently set to S t o r e D e m o mode.
To switch to H o m e U s e mode you should do the followings:
From the TV Menu, choose O P T I O N -> Choose M o d e S e t t i n g -> Choose
H o m e U s e.
Now, you have completed switching to the H o m e U s e mode.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
A Do not to use a wet cloth.
A
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
103
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
Power requirement
Television System
Operating Temperature
1031.2 x 720.9 x 308.0 mm
40.5 x 28.3 x 12.1 inches
1216.7 x 818.1 x 353.0 mm
47.9 x 32.2 x 13.8 inches
1031.2 x 656.7 x 80.8mm
40.5 x 25.8 x 3.1 inches
1216.7 x 759.0 x 83.0 mm
47.9 x 29.8 x 3.2 inches
24.3 kg / 53.5 lbs
22.2 kg / 48.9 lbs
33.7 kg / 74.2 lbs
31.2 kg/ 68.7 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
75 Ω
0 ~ 40°C / 32 ~ 104°F
Operating Humidity
Less than 80%
Storage Temperature
-20 ~ 60°C / -4 ~ 140°F
Storage Humidity
APPENDIX
104
50PQ10R-TA
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
■
50PQ1***
42PQ10R-TA
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
Environment condition
42PQ1***
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
42PQ3***
50PQ3***
42PQ30R-TA
50PQ30R-TA
40.5 x 28.3 x 12.1 inches
1031.2 x 720.9 x 308.0 mm
47.9 x 32.2 x 13.8 inches
1216.7 x 818.1 x 353.0 mm
40.5 x 25.8 x 3.1 inches
1031.2 x 656.7 x 80.8 mm
47.9 x 29.8 x 3.2 inches
1216.7 x 759.0 x 83.0 mm
24.8 kg / 54.6lbs
22.7 kg / 50.0lbs
33.7 kg / 74.2 lbs
31.2 kg / 68.7 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
42PQ6***
50PQ6***
42PQ60R-TA
50PQ60R-TA
40.9 x 28.5 x 12.1 inches
1040.8 x 725.8 x 308.0 mm
48.3 x 32.4 x 13.8 inches
1228.8 x 824.6 x 353.0 mm
40.9 x 26.3 x 3.0 inches
1040.8 x 669.2 x 76.8 mm
48.3 x 30.39 x 3.1 inches
1228.8 x 772 x 78.9 mm
25.3 kg / 55.7 lbs
23.3 kg / 51.3 lbs
35.0 kg / 77.1lbs
32.5 kg / 71.6 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
Refer to p. 66
Supported movie files
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
60PS40FR-TA
50PQ60R-TA
48.4 x 32.5 x 13.9 inches
1228.8 x 824.6 x 353.0 mm
57.7 x 40.5 x 15.5 inches
1468 x 1028.8 x 395.5 mm
48.4 x 30.4 x 3.1 inches
1228.8 x 772.0 x 78.9 mm
57.7 x 37.3 x 3.4 inches
1468 x 949.5 x 88.5 mm
36.3 kg / 80.0 lbs
33.8 kg / 74.5 lbs
53.06 kg / 116.9 lbs
47.16 kg / 103.9 lbs
AC100-240V~ 50/60Hz
Refer to p. 66
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
75 Ω
0 ~ 40°C / 32 ~ 104°F
Operating Humidity
Less than 80%
Storage Temperature
-20 ~ 60°C / -4 ~ 140°F
Storage Humidity
■
50PS40FR-TA
42PQ60R-TA
AC100-240V~ 50/60Hz
Supported movie files
Environment condition
50PQ6
60PS4***
***
APPENDIX
Power requirement
42PQ6
50PS4***
***
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
105
APPENDIX
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
Power Consumption
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
APPENDIX
Power requirement
External Antenna Impedance
Operating Temperature
106
40.9 x 28.5 x 12.1 inches
1040.8 x 725.8 x 308.0 mm
48.3 x 32.4 x 13.8 inches
1228.8 x 824.6 x 353.0 mm
40.9 x 26.3 x 3.0 inches
1040.8 x 669.2 x 76.8 mm
48.3 x 30.39 x 3.1 inches
1228.8 x 772 x 78.9 mm
25.3 kg / 55.7 lbs
23.3 kg / 51.3 lbs
36.3 kg /80.02lbs
33.8 kg / 74.5 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
42PQ7***
50PQ7***
42PQ70R-TA
42PQ70BR-TA
50PQ70R-TA
50PQ70BR-TA
40.9 x 28.8 x 12.1 inches
1040.8 x 731.8 x 308.0 mm
48.3 x 32.9 x 14.3 inches
1228.8 x 836.5 x 364 mm
40.9 x 26.8 x 3.0 inches
1040.8 x 682.0 x 76.8 mm
48.3 x 30.8 x 3.1 inches
1228.8 x 784.5 x 78.9 mm
26 kg / 55.3 lbs
23.8 kg / 52.4 lbs
35.8 kg / 78.9lbs
32.8 kg / 72.3 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
50PS8***
60PS8***
50PS80R-TA
50PS80BR-TA
60PS80R-TA
60PS80BR-TA
48.3 x 32.9x 12.2inches
1228.8 x 835.8 x 309 mm
57.7 x 38.9 x 14.6 inches
1465.4x 986.4 x 371 mm
48.3 x 31.3 x 3.1 inches
1228.8x 795.1 x 78.9 mm
57.7 x 36.5 x 3.2 inches
1465.4 x 926.7 x 82.1 mm
38.3 kg / 84.4 lbs
34.3kg / 75.6 lbs
53.6kg / 118.1 lbs
46.6kg / 102.7lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
75 Ω
0 ~ 40°C / 32 ~ 104°F
Operating Humidity
Less than 80%
Storage Temperature
-20 ~ 60°C / -4 ~ 140°F
Storage Humidity
■
50PS60R-TA
50PS60FR-TB
50PS60FR-TC
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
Programme Coverage
Supported movie files
50PS6***
42PS60R-TA
42PS60FR-TB
42PS60FR-TC
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Television System
Environment condition
42PS6***
Less than 85%
Refer to p. 66
The specifications shown above may be changed without prior notice for quality improvement.
A
This feature is not available for all models.
Code (Hexa)
Function
95
08
0B
79
45
43
7C
07
06
40
41
44
28
30
02
03
00
01
1E
09
10 ~19
53
1A
72
71
63
61
20
21
7E
65
0E
8E
ENERGY SAVING, POWER SAVING
POWER
INPUT
RATIO
Q.MENU
MENU
OK( )
RETURN
AV MODE
+
P
P
FAV
MUTE
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.OPT(T.Option)/
SIMPLINK
FREEZE
SLEEP
Note
R/C BUTTON
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON (Except 42/50PQ1***)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON (Except 42/50PQ1***)
R/C BUTTON
R/C BUTTON
R/C BUTTON
Except 42/50PQ1***, 42/50PQ3***
APPENDIX
107
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions
externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
RS-232C IN
(CONTROL&SERVICE)
Note:
RS-232C connection cables are not supplied with the
product.
In USB and Bluetooth mode, it doesn’t support RS232C function.
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
1
5
6
9
No Connection
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
APPENDIX
108
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p .113
OPTION
Move
Menu Language
OK
: English
Input Label
OPTION
Input Label
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
ID
Set
:: 11
SetID
ID
Set
: :11
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
: Home Use
Mode Setting
OK
3
OK
F
1
G
Close
: Home Use
E
E
2
OK
: English
SIMPLINK
Mode Setting
1 MENU
Move
Menu Language
Select O P T I O N.
Select S e t I D.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1~99.
APPENDIX
• Press R E T U R N to move to the previous menu screen.
109
APPENDIX
Communication Parameters
Baud rate : 9600 bps (UART)
Data length : 8 bits
A Parity : None
Stop bit : 1 bit
Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
A
A
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
a
00 ~ 01
k
c
Refer to p.111
k
d
04. Volume Mute
k
e
05. Volume Control
k
f
01. Power
k
02. Aspect Ratio
03. Screen Mute
COMMAND1 COMMAND2
DATA
(Hexadecimal)
u
00 ~ 03
k
r
00 ~ 64
k
s
00 ~ 64
14. Colour Temperature
k
15. Treble
16. Bass
00 ~ 01
17. Abnormal Status
k
z
FF
00 ~ 64
18. ISM Method
j
p
Refer to p.113
j
u
01
j
q
00 ~ 04
00 ~ 01, 10
06. Contrast
k
g
00 ~ 64
19. Auto Configure
07. Brightness
k
h
00 ~ 64
20. Energy Saving
08. Colour
k
i
00 ~ 64
or Power Saving
09. Tint
k
j
00 ~ 64
21. Tune Command
m
a
Refer to p.114
10. Sharpness
k
k
00 ~ 64
22. Channel Skip
m
b
00 ~ 01
11. OSD Select
k
k
l
m
00 ~ 01
23. Key
m
c
Refer to p.107
00 ~ 01
24. Input select (Main)
x
b
Refer to p.115
k
t
00 ~ 64
12. Remote Control Lock
/Key Lock Mode
13. Balance
(Except 42/50PQ1***)
Transmission / Receiving Protocol
Transmission
OK Acknowledgement
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command2][ ][Set ID][ ][OK][Data][x]
[Command 1] : First command to control the set.(j, k, m or x)
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
[Command 2] : Second command to control the set.
APPENDIX
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected TV is
controlled. Set ID is indicated as decimal (1~ 99)
on menu and as Hexa decimal (0x0~ 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of comand.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
110
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
TV transmits ACK(acknowledgement) based on this format
when receiving abnormal data form non-viable functions or
communication errors.
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, TV will send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, TV will send the ‘a’, ‘b’.
[NG]: use the large character.
0 5 . Volume Control (Command: k f)
0 1 . Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 113.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.”
0 6 . Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
02. Aspect Ratio (Command: k c) (Main picture size)
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: Normal screen (4:3)
Data 02: Wide screen (16:9)
Data 04: Zoom
Data 10~1F: Cinema Zoom1~ 16
Data 06: Original
Data 07: 14:9
Data 09: Just Scan
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p)mode, Just Scan
is available.
0 3 . Screen Mute (Command: k d)
To select screen mute on/off.
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
Transmission [k][d][ ][Set ID][ ][Data][Cr]
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Data 00 :
Data 01 :
Data 00 :
Data 10 :
Data Min : 00 ~ Max : 64
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
In case of Video-Out mute on only, TV will display On
Screen Display(OSD) But, In case of Screen Mute On, TV
will not display OSD.
04. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
APPENDIX
Screen mute off (Picture on)
Screen mute on (Picture off)
Video-Out Mute off
Video-Out Mute on
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
111
APPENDIX
10. Sharpness (Command: k k)
15. Treble (Command: k r)
To adjust the screen sharpness.
To adjust treble.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 113.
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
16. Bass (Command: k s)
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
To adjust bass.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
17. Abnormal State (Command: k z)
12. Remote Control Lock/Key Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
(If you’re not using the remote control and front
panel controls on the TV, use this mode. When main
power is on/off, remote control lock is released.)
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
13. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 113.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
14. Colour Temperature (Command: k u)
To adjust colour temperature.
You can also adjust Colour Temperature in the PICTURE
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
112
To recognize an abnormal state.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 07: Turn the TV off by Fan Alarm function (option)
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
Data a: Turn the TV off by AV board detection.
* This function is “read only”.
18. ISM Method (Command: j p)
To avoid having a fixed image remain on screen.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
MSB
0
LSB
0
0
0
0
0
0
0
Orbiter
White Wash
Normal
Colour Wash
7
6 5
1
4
0
3
2
1
0
Function
0
0
1
0
Orbiter
0
1
0
0 White Wash
1
0
0
0
0
0
0
0 Colour Wash
Normal
Data 02: Orbiter
Data 04: White Wash
Data 08: Normal
Data 20: Colour Wash
* More two kinds of function can not be set at a time.
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
1 9 . A u t o C o n f i g u r e ( C o m m a n d : j u ) (Except 42/50PQ1***)
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
To reduce the power consumption of the TV.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data 00: Low Power Off
Data 01: Low Power Minimum
Data 02: Low Power Medium
Data 03: Low Power Maximum
Data 10: Intelligent Sensor Low
Data 11: Intelligent Sensor Middle
Data 12: Intelligent Sensor High
A : Step 10
F : Step 15
10 : Step 16
* Real data mapping 2
00: -30
01: -29
02: -28
1E:
0
28: +10
64 : Step 100
6E : Step 110
(Except 42/50PQ1***)
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
73 : Step 115
74 : Step 116
C7 : Step 199
APPENDIX
20. Energy Saving (Command: j q)
P o w e r S a v i n g ( C o m m a n d : j q )(Only 42/50PQ1***)
* Real data mapping 1
00 : Step 0
3A : +28
3B : +29
3C : +30
4E: N/A
4F : N/A
50: N/A
FE : Step 254
FF : Step 255
113
APPENDIX
21 . Tune Command / Channel Tuning (Command: m a)
Tune Channel to following Physical number.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data0, Data1: Programme Number
Data0: High byte
Data1: Low byte
Data2: Attribute
Air
7
Reserved
6
Reserved
0
x
5
4
3
RF Source
Reserved Reserved
Reserved
0
0
2
1
Reserved Reserved
0
ATV
x
x
x
Data
0
x
x
x
1
Sub picture
Data
0
Main / Sub
0
x
0
1
DTV
0
x
1
0
Radio
0
x
1
1
Reserved
Main / Sub
Main picture
Cable
7
Reserved
6
Reserved
1
x
5
4
3
RF Source
Reserved Reserved
Reserved
0
0
ATV
x
x
x
0
Main picture
x
x
x
1
Sub picture
1
x
0
1
DTV
1
x
1
0
Radio
1
x
1
1
Reserved
‘x’ : don’t care
Acknowledgement [a][ ][Set ID][OK][ ][Data0][Data1][x]
[a][ ][Set ID][NG][ ][Data0][x]
22. Channel Skip(Command: m b)
To set skip status for the current Programme.
APPENDIX
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
23. K e y (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data: Key code - Refer to page 107.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
114
2
1
Reserved Reserved
24. Input select (Command: x b)
(Main Picture Input)
To select input source for TV
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data: Structure
MSB
0
LSB
0
0
0
External Input
0
0
0
0
Input Number
External Input
Data
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB-PC
1
0
0
1
HDMI
Input Number
(Except 42/50PQ1***)
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
115
Download PDF

advertising