LG | 47LB750T | LG 47LB750T Owner’s Manual

OWNER’S MANUAL
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Click! User Guide
Please read this manual carefully before operating
your set and retain it for future reference.
LB63**
LB65**
LB67**
LB69**
LB72**
LB75**
LB87**
*MFL68027103*
www.lg.com
P/NO : MFL68027103 (1412-REV07)
Printed in Korea
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3Licenses
42REMOTE CONTROL
3
43Magic Remote Functions
Open Source Software
Notice Information
3
EXTERNAl CONTROL DEVICE
SETUP
4
Safety Instructions
10
Viewing 3D Imaging (Only 3D models)
11Installation Procedure
12
ASSEMBLING AND PREPARING
12Unpacking
15
Separate purchase
16
Parts and buttons
18
- Using the Joystick button
19
Lifting and moving the TV
20
Setting up the TV
20
- Attaching the stand
24
- Attaching the Sound Bar Supporter
25
Mounting on a table
27
Mounting on a wall
29
Tidying cables
31
Using Built-in Camera
31
- Preparing Built-in Camera
32
- Name of Parts of Built-in Camera
32
- Checking the Camera’s Shooting
Range
33MAKING CONNECTIONS
33
34
34
35
36
37
38
39
39
39
40
41
Antenna connection
Satellite dish connection
Headphone connection
HDMI connection
DVI to HDMI connection
Component connection
Composite connection
Audio connection
- Digital optical audio connection
USB connection
Euro Scart connection
MHL connection
44
44
45
Registering Magic Remote
How to use Magic Remote
Precautions to Take when Using the
Magic Remote
45Using the User guide
46MAINTENANCE
46
46
46
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
46TROUBLESHOOTING
47SPECIFICATIONS
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION / EXTERNAL CONTROL DEVICE SETUP
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is
contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
EXTERNAl CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com.
ENGLISH
ENG
Licenses
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
Safety Instructions
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and/or remote control
in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a
bathroom
--Near any heat source such as stoves and
other devices that produce heat
--Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
yyMake sure to connect Mains cable to
compliant AC mains socket with Grounded
earth pin. (Except for devices which are not
grounded on earth.) Otherwise possibility you
may be electrocuted or injured.
yyDo not place the product where it might be
exposed to dust.
This may cause a fire hazard.
yyEnsure the power cord does not come into
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.
yyMains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
yyDo not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
yyInsert power cable plug completely into wall
socket otherwise if not secured completely
into socket, fire ignition may break out.
yyDo not place a heavy object, or the product
itself, on power cables.
Otherwise, this may result in fire or electric
shock.
yyBend antenna cable between inside and
outside building to prevent rain from flowing
in.
This may cause water damaged inside the
Product and could give an electric shock.
SAFETY INSTRUCTIONS
y Do not plug too many electrical devices into
a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
y Do not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
y Keep the anti-moisture packing material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
y Dispose of used batteries carefully to ensure
that a small child does not consume them.
Please seek Doctor- Medical Attention
immediately if child consumes batteries.
y Do not insert any metal objects/conductors
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not touch
the power cable right after plugging into the
wall input terminal. You may be electrocuted.
(Depending on model)
y Do not put or store inflammable substances
near the product. There is a danger of
combustion/explosion or fire due to careless
handling of the inflammable substances.
y Do not drop metallic objects such as coins,
hair pins, chopsticks or wire into the product,
or inflammable objects such as paper and
matches. Children must pay particular
attention. Electrical shock, fire or injury can
occur. If a foreign object is dropped into the
product, unplug the power cord and contact
the service centre.
Desic
cant
y Do not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
y Do not spray water on the product or scrub
with an inflammable substance (thinner or
benzene). Fire or electric shock accident can
occur.
ENGLISH
ENG
y When mounting TV onto wall make sure to
neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyDo not allow any impact, shock or any
objects to fall into the unit, and do not drop
anything onto the screen.
You may be injured or the product can be
damaged.
yyUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a long
period of time. Accumulated dust can cause
fire hazard and insulation deterioration can
cause electric leakage/shock/fire.
yyNever touch this product or antenna during a
thunder or lighting storm.
You may be electrocuted.
yyApparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
yyNever touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
yyDo not install this product on a wall if it could
be exposed to oil or oil mist.
This may damage the product and causeit to
fall.
CAUTION
yyDo not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
yyIf any of the following occur, unplug the
product immediately and contact your local
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange
smell
This may result in fire or electric shock.
yyInstall the product where no radio wave
occurs.
yyThere should be enough distance between
an outside antenna and power lines to keep
the former from touching the latter even
when the antenna falls.
This may cause an electric shock.
yyDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or
where the product cannot be fully supported.
Otherwise, the product may fall or flip over,
which may cause injury or damage to the
product.
SAFETY INSTRUCTIONS
yyIf you intend to mount the product to a wall,
attach VESA standard mounting interface
(optional parts) to the back of the product.
When you install the set to use the wall
mounting bracket (optional parts), fix it
carefully so as not to drop.
yyOnly use the attachments / accessories
specified by the manufacturer.
yyWhen installing the antenna, consult with a
qualified service technician. If not installed
by a qualified technician, this may create a
fire hazard or an electric shock hazard.
yyWe recommend that you maintain a
distance of at least 2 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
yyOnly use the specified type of battery.
This could cause damage to the remote
control.
yyDo not mix new batteries with old batteries.
This may cause the batteries to overheat
and leak.
yyBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
yyDo not place non-rechargeable batteries in
charging device.
yyMake sure there are no objects between the
remote control and its sensor.
yySignal from Remote Control can be
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this occurs
turn off lighting or darken viewing area.
yyWhen connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over, which
may cause injury or damage the product.
yyDo not turn the product On/Off by pluggingin or unplugging the power plug to the
wall outlet. (Do not use the power plug for
switch.)
It may cause mechanical failure or could
give an electric shock.
yyPlease follow the installation instructions
below to prevent the product from
overheating.
--The distance between the product and the
wall should be more than 10 cm.
--Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
cupboard).
--Do not install the product on a carpet or
cushion.
--Make sure the air vent is not blocked by a
tablecloth or curtain.
Otherwise, this may result in fire.
ENGLISH
ENG
yyIf you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may fall
over, which may cause injury.
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyTake care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
yyPeriodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized servicer.
yyPrevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
yyProtect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
yyDo not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.
yyAvoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.
yyWhen cleaning the product and its
components, unplug the power first and wipe
it with a soft cloth. Applying excessive force
may cause scratches or discolouration. Do
not spray with water or wipe with a wet cloth.
Never use glass cleaner, car or industrial
shiner, abrasives or wax, benzene, alcohol
etc., which can damage the product and its
panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
yyAs long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
yyWhen unplugging the cable, grab the plug
and unplug it, by pulling at the plug. Don’t pull
at the cord to unplug the power cord from the
power board, as this could be hazardous.
yyWhen moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be damaged,
which may create a fire hazard or cause
electric shock.
yyWhen moving or unpacking the product, work
in pairs because the product is heavy.
Otherwise, this may result in injury.
SAFETY INSTRUCTIONS
yyRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
yyIf the product feels cold to the touch, there
may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
product.
yyThe panel is a high technology display
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel. This
does not indicate a malfunction and does
not affect the performance and reliability of
the product.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
yyYou may find different brightness and colour
of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
yyDisplaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene from
a video game) for a prolonged time may
cause damage to the screen, resulting in
retention of the image, which is known as
image sticking. The warranty does not cover
the product for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period (2
or more hours for LCD, 1 or more hours for
Plasma).
Also, if you watch the TV at a ratio of 4:3 for
a long time, image sticking may occur on
the borders of the panel.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.
yyDo not use high voltage electrical goods
near the TV (e.g. electric mosquito-swatter).
This may result in product malfunction.
ENGLISH
ENG
yyContact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
9
10
SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging
(Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15
minute breaks every hour. Viewing 3D
contents for a long period of time may
cause headache, dizziness, fatigue or
eye strain.
Those that have a photosensitive
seizure or chronic illness
yy Some users may experience a seizure or
other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
yy 3D Contents are not recommended to those
who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.
yy If you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
yy If your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
yy Do not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
yy When these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
-- Consult your doctor when the symptoms
persist. Symptoms may include
headache, eyeball pain, dizziness,
nausea, palpitation, blurriness,
discomfort, double image, visual
inconvenience or fatigue.
CAUTION
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further away from the
TV.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
-- Children under the age of 10 may
overreact and become overly excited
because their vision is in development (for
example: trying to touch the screen or
trying to jump into it. Special monitoring
and extra attention is required for children
watching 3D contents.
-- Children have greater binocular disparity
of 3D presentations than adults because
the distance between the eyes is shorter
than one of adults. Therefore they will
perceive more stereoscopic depth
compared to adults for the same 3D
image.
yy Teenagers
-- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them to
refrain from watching 3D contens for a
long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise,
you may not be able to view 3D videos
properly.
� Do not use 3D glasses instead of your normal
glasses, sunglasses or protective goggles.
� Using modified 3D glasses may cause eye
strain or image distortion.
� Do not keep your 3D glasses in extremely high
or low temperatures. It will cause deformation.
� The 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.
INSTALLATION PROCEDURE
11
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you
are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
Installation Procedure
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV
may take a few minutes.
ENGLISH
ENG
NOTE
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
*A <
= 10 mm
A
A
*B <
= 18 mm
yy Use a certified cable with the HDMI logo attached.
yy If you do not use a certified HDMI cable, the screen may not display or a connection error may
occur. (Recommended HDMI Cable Types)
-- High-Speed HDMI®/™ Cable
-- High-Speed HDMI®/™ Cable with Ethernet
ASSEMBLING AND PREPARING
13
ENGLISH
ENG
ENERGY AV MODE INPUT
TV
ENERGY AV MODE INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
SAVING
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
1
2
4
5
7
8
9
0
FLASHBK
LIST
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
Q.MENU
MENU INFO
ENTER
BACK
3
6
Q.MENU
ENTER
EXIT
BACK
EXIT
L/R SELECT
L/R SELECT
FREEZE
FREEZE
RATIO
RATIO
Remote Control, Batteries
(AAA)
The remote control will not
be included for all sales
market.
(Depending on model)
(See p.42)
Magic Remote, Batteries
(AA)
(Only LB63**, LB65**, LB67**,
LB69**, LB72**, LB75**,
LB87**)
(See p.43)
Owner’s Manual
Cinema 3D Glasses
The number of 3D glasses
may differ depending on the
model or country.
(Only LB65**, LB67**,
LB69**, LB72**, LB75**,
LB87**)
Wall Mount Spacers
2EA
(Only 42LB63**, 42LB65**)
(See p.29)
Component Gender Cable
(Only LB87**)
(See p.37)
Composite Gender Cable
(Only LB87**)
(See p.37, 38)
Power Cord
(Depending on model)
Cable Holder
(Depending on model)
(See p.29, 30)
Cable Managements
2EA
(Only LB63**, LB65**,
LB67**, LB69**, LB72**)
(See p.29, 30)
Cable Managements
2EA
(Only LB75**)
(See p.30)
Stand Screws
4EA, M4 x L20
(Only 32LB65**)
(See p.20, 21)
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Stand Screws
4EA, M4 x L14
(Only LB63**,
39/42/47/50/55/60/70LB65**,
LB67**, LB69**, LB72**,
LB75**)
8EA, M4 x L14
(Only LB87**)
(See p.20, 21, 22,
23, 24)
Stand Screws
4EA, M4 x L10
(Only LB75**)
(See p.21)
Stand Bases
(Only LB65**-TH)
(See p.21)
Stand Bases
(Only LB63**,
32/39/42/47/50/55/60LB65**
-TA/TB)
(See p.20)
Stand Assys
(Stand Body/Stand Base)
(Only 70LB65**-TA, LB67**,
LB69**, LB72**)
(See p.20)
Stand Front
(Only LB75**)
(See p.21)
Stand Supporters
(Only LB75**)
(See p.21)
Sound Bar
(Only LB87**)
(See p.22, 24)
Stand Assys
(Only LB87**)
(See p.22)
Sound Bar Supporters
(Only LB87**)
(See p.24)
Screw Covers
(Only LB87**)
(See p.23, 24)
ASSEMBLING AND PREPARING
15
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
AG-F***DP
Dual Play Glasses
AG-F***
Cinema 3D Glasses
AN-VC5**
Video Call Camera
LG Audio Device
AN-MR500
Magic Remote
LB65**, LB67**,
LB69**, LB72**,
LB75**
LB87**
AG-F***DP
Dual Play Glasses
•
•
AG-F***
Cinema 3D Glasses
•
•
•
Compatibility
LB63**
AN-MR500
Magic Remote
•
•
AN-VC5**
Video Call Camera
•
•
LG Audio Device
•
•
•
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ENGLISH
ENG
Separate purchase
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
A type : LB63**, LB65**-TA/TB
B type : LB65**-TH
Screen
Screen
Speakers
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button2
Joystick Button2
C type : LB67**, LB69**, LB72**
Screen
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button2
ASSEMBLING AND PREPARING
E type : LB87**
Screen
Built-in Camera
Screen
Speakers
Speakers
LG Logo light
Remote control and
Intelligent1 sensors
Power Indicator
Remote control and
Intelligent1 sensors
Joystick Button2
Joystick Button2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
yy You can set the LG Logo light or Power indicator Light to on or off by selecting General in the
main menus. (Depending on model)
ENGLISH
ENG
D type : LB75**
17
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
Using the Joystick button
You can simply operate the TV functions by pressing to turn On/Off or sliding your finger over joystick
button moving up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
Volume
Control
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
If you place your finger over the joystick button and move it up
Programmes
or down, you can scrolls through the saved programmes you
Control
want.
NOTE
yy When your finger over the joystick button and push it to the up, down, left or right, be careful
not to press the joystick button. If you press the joystick button first, you may not be able to
adjust the volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items( , ,
) moving the joystick button left or right.
TV Off
Turns the power off.
Close
Closes Clears on-screen displays and returns to
TV viewing.
Input
Changes the input source.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
yy When handling the TV, be careful not to
damage the protruding joystick button.
ENGLISH
ENG
Lifting and moving the TV
19
20
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
70LB65**-TA, LB67**, LB69**, LB72**
Image shown may differ from your TV.
1
Stand Body
Attaching the stand
LB63**, 32/39/42/47/50/55/60LB65**-TA/TB
1
A stand base
Stand Base
A stand base
B stand base
1
B stand base
2
1
2
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
2
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
2
M4 x L14
4EA
M4 x L20
(Only 32LB65**)
M4 x L14
4EA
ASSEMBLING AND PREPARING
21
1
A stand base
ENGLISH
ENG
LB75**
LB65**-TH
1
B stand base
1
2
1
Stand Front
2
B Stand
Supporter
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
A Stand
Supporter
2
2
M4 x L10
4EA
1
2
M4 x L14
4EA
M4 x L20
(Only 32LB65**)
22
ASSEMBLING AND PREPARING
ENGLISH
ENG
LB87**
3
1
Sound Bar
1
Stand Assy Right
Stand Assy Left
2
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
M4 x L14
4EA
4
2
M4 x L14
4EA
ASSEMBLING AND PREPARING
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
yy Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
NOTE
M4 x L14
4EA
4
Screw Cover
yy Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
yy The Screw Cover will protect the opening
from accumulating dust and dirty.
ENGLISH
ENG
3
23
24
ASSEMBLING AND PREPARING
ENGLISH
ENG
Attaching the Sound Bar Supporter
(In case of mounting on a wall)
3
LB87**
1
Sound Bar
Sound Bar Supporter
Right
Sound Bar Supporter
Left
M4 x L14
M4 x L14
4EA
4EA
4
2
Screw Cover
ASSEMBLING AND PREPARING
y y When attaching the Sound Bar Supporter
to the TV set, place the screen facing
down on a cushioned table or flat surface
to protect the screen from scratches.
y y Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
y y The sound bar supporter only uses for
wall mounting.
y y After assembling the Sound Bar Wall
Mount Brackets, do not adjust the angle
of the TV while holding the Sound Bar or
hanging onto the Sound Bar.
y y When lifting the product, or moving it,
make sure that two or more people safely
lift it and set it upright on a flat surface.
When there are two people, one person
should stand on the right side of the
product and the other person should
stand on the left side to lift it.
When moving the product, hold the top
and bottom corners.
y y When lifting the product, or moving it,
do not hold the Sound Bar. If you hold
the Sound Bar when lifting the product,
or moving it, the Sound Bar may be
damaged.
<When lifting the product>
NOTE
y y Remove the sound bar supporter before
installing the stand by performing the
sound bar supporter attachment in
reverse.
y y The Screw Cover will protect the opening
from accumulating dust and dirty.
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- - Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
m
10 c
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
y y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
<When moving the product>
ENGLISH
ENG
CAUTION
25
26
ASSEMBLING AND PREPARING
ENGLISH
ENG
Using the Kensington security system
(This feature is not available for all models.)
y y Image shown may differ from your TV.
The Kensington security system connector
is located at the rear of the TV. For more
information of installation and using, refer to the
manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
WARNING
y y If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
» » Using cabinets or stands
recommended by the manufacturer of
the television.
» » Only using furniture that can safely
support the television.
» » Ensuring the television is not
overhanging the edge of the
supporting furniture.
» » Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
» » Not standing the televisions on cloth
or other materials placed between the
television and supporting furniture.
» » Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
ASSEMBLING AND PREPARING
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- - If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
y y Make sure that children do not climb on
or hang on the TV.
NOTE
y y Use a platform or cabinet that is strong
and large enough to support the TV
securely.
y y Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
We recommend the use of LG’s wall mount
bracket.
When you do not use LG’s wall mount bracket,
please use a wall mount bracket where the
device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
10 cm
10 cm
10 cm
ENGLISH
ENG
Securing the TV to a wall
27
28
ASSEMBLING AND PREPARING
ENGLISH
ENG
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase (Wall Mounting Bracket)
Model
32/39LB65**
42/47/55LB63**
42/47/50/55LB65**
49/55LB87**
VESA (A x B) 200 x 200
400 x 400
Standard
screw
M6
M6
Number of
screws
4
4
Wall mount
bracket
LSW240B
MSW240
LSW440B
MSW240
Model
60LB65**
70LB65**
42/47/50/55LB67**
42/47/55LB69**
42/47/55/60/65LB72**
42/47/55/60/65LB75**
60LB87**
VESA (A x B) 400 x 400
600 x 400
Standard
screw
M6
M8
Number of
screws
4
4
Wall mount
bracket
LSW440B
LSW640B
Wall mount bracket
LSW240B
LSW440B
A
B
LSW640B
MSW240
CAUTION
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your manufacturer’s warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
ASSEMBLING AND PREPARING
29
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
yy When attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV. (Only 42LB63**,
42LB65**)
Image shown may differ from your TV.
1 Gather and bind the cables with the cable
holder. (Depending on model)
2 Fix the Cable Management firmly to the TV.
(Only LB63**, 39/42/47/50/55/60LB65**-TA/TB,
LB67**, LB69**, LB72**)
Cable Holder
Cable Management
(Only 32LB65**-TA/TB)
Wall Mount Spacer
Cable Management
(Only 70LB65**-TA)
Cable Holder
Cable Management
ENGLISH
ENG
Tidying cables
NOTE
30
ASSEMBLING AND PREPARING
ENGLISH
ENG
(Only 32LB65**-TH)
(Only LB87**)
Cable Holder
Cable Management
Cable Management
(Only 39/42/47/50/55LB65**-TH)
Cable Holder
CAUTION
y y Do not move the TV by holding the cable
holder, as the cable holder may break,
and injuries and damage to the TV may
occur.
Cable Management
(Only LB75**)
Cable Holder
Cable Management
ASSEMBLING AND PREPARING
(Only LB87**)
You can make a Skype video call or use the
motion recognition function using the built-in
camera of the TV.
This TV does not support the use of an external
camera.
Preparing Built-in Camera
1 Pull up the slide at the back of the TV.
Angle
Adjustment
Lever
NOTE
7
y y Before using the built-in camera, you
must recognize the fact that you are
legally responsible for the use or misuse
of the camera by the relevant national
laws including the criminal law.
y y The relevant laws include the Personal
Information Protection law which
regulates the processing and transferring
of personal information and the law which
regulates the monitoring by camera in a
workplace and other places.
y y When using the built-in camera,
avoid questionable, illegal, or immoral
situations. Other than at public places or
events, consent to be photographed may
be required. We suggest avoiding the
following situations:
(1) Using the camera in areas where the
use of camera is generally prohibited
such as restroom, locker room, fitting
room and security area.
(2) Using the camera while causing the
infringement of privacy.
(3) Using the camera while causing the
violation of the relevant regulations or
laws.
Slide
NOTE
y y Remove the protective film before using
the built-in camera.
2 You can adjust the angle of the camera with
7
the angle adjustment lever on the back of
5
the built-in camera.
<Side View>
7
5
5
Lever
Lens
ENGLISH
ENG
Using Built-in Camera
31
32
ASSEMBLING AND PREPARING
ENGLISH
ENG
3 Push down the built-in camera when you are
not using it.
7
5
5
7
7
5
5
7
Name of Parts of Built-in Camera
Camera Lens
Protective film
Microphones
7
5
5
7
Checking the Camera’s Shooting
Range
(Home) button on the remote
1 Press the
control to display the Home menu.
2 Select CAMERA
Wheel(OK) button.
and then press the
NOTE
y y The optimal distance from the camera
to use the motion recognition function is
between 1.5 m and 4.5 m.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the 42LB67** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, PC, gaming devices, and other
external devices.
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
ANTENNA /
CABLE IN
NOTE
y y The external device connection may differ
from the model.
(LB87** : HDMI/DVI IN1/2/3/4)
y y Connect external devices to the TV
regardless of the order of the TV port.
y y If you record a TV programme on a
DVD recorder or VCR, make sure to
connect the TV signal input cable to the
TV through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
y y Refer to the external equipment’s manual
for operating instructions.
y y If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
y y In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
y y In PC mode, some resolution settings
may not work properly depending on the
graphics card.
(*Not Provided)
NOTE
y y Use a signal splitter to use more than 2
TVs.
y y If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y y If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
y y An antenna cable and converter are not
supplied.
y y Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC.
ENGLISH
ENG
MAKING CONNECTIONS
33
34
MAKING CONNECTIONS
ENGLISH
ENG
Satellite dish connection
Headphone connection
(Only satellite models)
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown.
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
13/18V
700mA Max
LNB
Satellite IN
(*Not Provided)
(*Not Provided)
NOTE
yyAUDIO menu items are disabled when
connecting a headphone.
yyOptical Digital Audio Out is not available
when connecting a headphone.
yyHeadphone impedance: 16 Ω
yyMax audio output of headphone: 0.627
mW to 1.334 mW
yyHeadphone jack size: 0.35 cm
MAKING CONNECTIONS
(Only LB87**)
ENGLISH
ENG
HDMI connection
35
Transmits the digital video and audio signals
from an external device to the TV. Connect the
external device and the TV with the HDMI cable
as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
ARC (Audio Return Channel)
yyAn external audio device that supports
SIMPLINK and ARC must be connected
using HDMI IN 1 (ARC) or HDMI/DVI IN 1
(ARC) port.
yyWhen connected with a high-speed
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
DVD / Blu-Ray /
HD Cable Box /
HD STB / PC
(Only LB63**, LB65**, LB67**, LB69**, LB72**,
LB75**)
(*Not
Provided)
DVD / Blu-Ray / HD Cable
Box / HD STB / PC
HDMI
NOTE
(*Not Provided)
HDMI
yy It is recommended to use the TV with
the HDMI connection for the best image
quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested
to carry an HD signal up to 1080p and
higher.
yy Supported HDMI Audio format :
Dolby Digital (32 KHz, 44.1 KHz, 48 KHz),
DTS (44.1 KHz, 48 KHz),
PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz,
192 KHz)
36
MAKING CONNECTIONS
(Only LB87**)
ENGLISH
ENG
DVI to HDMI connection
Transmits the digital video signal from an
external device to the TV. Connect the external
device and the TV with the DVI-HDMI cable as
shown. To transmit an audio signal, connect an
audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
(Only LB63**, LB65**, LB67**, LB69**, LB72**,
LB75**)
RED
WHITE
(*Not Provided)
(*Not Provided)
AUDIO OUT
DVI OUT
DVD / Blu-Ray / HD Cable Box / PC / HD STB
NOTE
DVD / Blu-Ray / HD Cable Box / PC / HD STB
yy Depending on the graphics card, DOS
mode may not work if a HDMI to DVI
Cable is in use.
yy When using the HDMI/DVI cable, Single
link is only supported.
37
MAKING CONNECTIONS
Component connection
ENGLISH
ENG
(Only LB87**)
Transmits analog video and audio signals
from an external device to the TV. Connect the
external device and the TV with a component
cable as shown.
(Only LB63**, LB65**, LB67**, LB69**, LB72**,
LB75**)
IN
AV
VIDEO
COMPONENT
AUDIO
Y
RED
RED
BLUE
GREEN
RED
RED
BLUE
GREEN
RED
RED
BLUE
GREEN
WHITE
RED
WHITE
GREEN
(*Not Provided)
DVD / Blu-Ray /
HD Cable Box
WHITE
VIDEO
PB
GREEN
(Use the
component gender
cable provided.)
WHITE
YELLOW
RED
RED
RED
BLUE
WHITE
BLUE
GREEN
YELLOW
(Use the composite
gender cable provided.)
(*Not Provided)
L
PR
R
L
AUDIO
R
AUDIO
VIDEO
NOTE
DVD / Blu-Ray / HD Cable Box
yy If cables are not installed correctly, it
could cause this image to display in black
and white or with distorted colours.
38
MAKING CONNECTIONS
ENGLISH
ENG
Composite connection
(Only LB87**)
Transmits analog video and audio signals
from an external device to the TV. Connect the
external device and the TV with the composite
cable as shown.
(Only LB63**, LB65**, LB67**, LB69**, LB72**,
LB75**)
AV
VIDEO
COMPONENT
COMPONENT
AUDIO
PR
PB
PB
Y
Y
RED
RED
WHITE
RED
WHITE
RED
RED
WHITE
YELLOW
WHITE
YELLOW YELLOW
WHITE
YELLOW
YELLOW
(Use the composite
gender cable provided.)
(*Not Provided)
(*Not Provided)
YELLOW
VIDEO
IN
L (MONO) AUDIO R
VIDEO
DVD / Blu-Ray / HD Cable Box / VCR
VCR / DVD / Blu-Ray /
HD Cable Box
L (MONO) AUDIO R
MAKING CONNECTIONS
39
USB connection
You may use an optional external audio system
instead of the built-in speaker.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
SmartShare menu to use various multimedia
files.
Digital optical audio connection
(USB 3.0 IN)
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
(*Not Provided)
HDD
(*Not Provided)
HUB
(*Not Provided)
USB
(*Not Provided)
NOTE
OPTICAL AUDIO IN
Digital Audio System
NOTE
y y Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
y y Audio with ACP (Audio Copy Protection)
function may block digital audio output.
y y Some USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB port on
the TV directly.
y y Connect the external power source if your
USB is needed.
ENGLISH
ENG
Audio connection
40
MAKING CONNECTIONS
(Only satellite models)
Transmits the video and audio signals from an
external device to the TV set. Connect the external device and the TV set with the euro scart
cable as shown.
AV1
IN/OUT
ENGLISH
ENG
Euro Scart connection
(*Not Provided)
Output
Type
Current
input mode
Digital TV
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
yy When watching digital TV in 3D imaging
mode, only 2D out signals can be output
through the SCART cable. (Only 3D
models)
yy If you use the Time Machine function on
digital TV, monitor out signals cannot be
output through the SCART cable.
MAKING CONNECTIONS
Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.
MHL passive cable
(*Not Provided)
Mobile phone
NOTE
y yConnect the mobile phone to the HDMI
IN 3 (MHL) or HDMI/DVI IN 4 (MHL) port
to view the phone screen on the TV.
y yThe MHL passive cable is needed to
connect the TV and a mobile phone.
y yThis only works for the MHL-enabled
phone.
y ySome applications can be operated by
the remote control.
y yFor some mobile phones supporting
MHL, you can control with the Magic
Remote.
y yRemove the MHL passive cable from the
TV when:
» » the MHL function is disabled
» » your mobile device is fully charged in
standby mode
ENGLISH
ENG
MHL connection
41
42
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To replace batteries,
open the battery cover, replace batteries (1.5 V AAA) matching the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyIn Analogue TV and some countries, some remote control buttons may not work.
yyThe remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor on the TV.
(Depending on model)
(POWER) Turns the TV on or off.
INPUT Changes the input source.
SETTINGS Accesses the main menus.
1 INFO
Views the information of the current programme and screen.
(Depending on model)
1
RATIO Resizes an image. (Depending on model)
Q. MENU Accesses the quick menus.
(User Guide) Sees user- guide.
INPUT Q.MENU
1
SETTINGS
1
2
3
4
5
6
7
8
9
GUIDE
0
Q.VIEW
Number buttons Enters numbers.
GUIDE Shows programme guide.
Q.VIEW Returns to the previously viewed programme.
FAV
P
A
G
E
2
MUTE
RECENT Shows the previous history.
SMART Accesses the Home menus.
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous level.
LIVE MENU Shows the list of Recommended, Programme, Search and Recorded.
EXIT Clears on-screen displays and returns to TV viewing.
RECENT
OK
BACK
3
TEXT
LIVE MENU
EXIT
T.OPT
SLEEP
LIVE TV
REC
SUBTITLE
AD/
Adjusts the volume level.
FAV Accesses your favourite programme list.
2
Used for viewing 3D video. (Depending on model)
2 INFO
Views the information of the current programme and screen.
(Depending on model)
MUTE
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
TV/RAD
Coloured buttons These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
3 Teletext buttons These buttons are used for teletext.
SLEEP Sets the sleep timer.
LIVE TV Returns to LIVE TV.
) Controls the Premium contents, Time Machine or
Control buttons (
SmartShare menus or the SIMPLINK compatible devices (USB or SIMPLINK or Time Machine).
REC
Starts to record and displays record menu. (Only Time Machine supported model)
SUBTITLE Recalls your preferred subtitle in digital mode.
AD/ By pressing the AD button, audio descriptions function will be enabled.
(Depending on model)
TV/RAD Selects Radio, TV and DTV programme.
MAGIC REMOTE FUNCTIONS
43
When the message “Magic Remote battery is low. Change the battery.” is
displayed, replace the battery. To replace batteries, open the battery cover, replace
batteries (1.5 V AA) matching
and
ends to the label inside the compartment,
and close the battery cover. Be sure to point the remote control toward the remote
control sensor on the TV. To remove the batteries, perform the installation actions
in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
(Only LB63**, LB65**, LB67**, LB69**, LB72**, LB75**, LB87**)
(POWER)
Turns the TV on or off.
Navigation buttons
(up/down/left/right)
Press the up, down, left or right
button to scroll the menu.If you
press , , or buttons
while the pointer is in use, the
pointer will disappear from the
screen and Magic Remote will
operate like a general remote
control. To display the pointer
on the screen again, shake
Magic Remote to the left and
right.
Wheel(OK)
Press the center of the Wheel
button to select a menu. You
can change programmes by
using the Wheel button.
Coloured buttons
These access special functions
in some menus.
: Red,
: Green,
(
: Yellow,
: Blue)
Adjusts the volume level.
(BACK)
Returns to the previous level.
(Home)
Accesses the Home menu.
(EXIT to LIVE)
Switches among broadcast
(antenna) and various inputs.
(Voice recognition)
(Depending on model)
P
Scrolls through the saved
programmes.
/ INPUT
Displays the Screen Remote.
*Accesses the Universal Control
Menu. (Depending on model)
*Pressing and holding the
/ INPUT button will display
a menu to select an external
device that is connected to the
TV.
Used for viewing 3D video.
(Only 3D models)
(MUTE)
Mutes all sounds.
*By Pressing and holding the
button, audio descriptions
function will be enabled.
(Depending on model)
ENGLISH
ENG
Magic Remote Functions
44
MAGIC REMOTE FUNCTIONS
ENGLISH
ENG
Voice recognition (Depending on model)
Network connection is required to use the
voice recognition function.
1 Press the Voice recognition button.
2 Speak when the voice display window
appears on the left of the TV screen.
• The voice recognition may fail when you
speak too fast or too slow.
• Use the Magic Remote no further than
10 cm from your face.
• The recognition rate may vary
depending on the user’s characteristics
(voice, pronunciation, intonation and
speed) and the environment (noise and
TV volume).
Registering Magic Remote
How to HOME
register the Magic Remote
BACK
To use the Magic Remote, first pair
it with your TV.
P
MY APPS
1 Put batteries into the Magic
Remote and turn the TV on.
2 Point the Magic Remote at your
TV and press the Wheel(OK) on
the remote control.
»»If the TV fails to register the
Magic Remote, try again after
turning the TV off and back
on.
How to deregister the Magic Remote
(BACK)
(Home)
Press the (BACK) and
(Home) buttons at the same time,
for five seconds, to unpair the
Magic Remote with your TV.
»»Pressing and holding the
(EXIT to LIVE) button will let
you cancel and re-register
Magic Remote at once.
How to use Magic Remote
yy Shake the Magic Remote
slightly to the right and left
/
or press (Home),
INPUT,
buttons to make
the pointer appear on the
screen.
»»The pointer will appear
when you turn the Wheel
button. (Depending on
model)
yy If the pointer has not been
used for a certain period
of time or Magic Remote is
placed on a flat surface, then
the pointer will disappear.
yy If the pointer is not
responding smoothly, you
can reset the pointer by
moving it to the edge of the
screen.
yy The Magic Remote depletes
batteries faster than a
normal remote due to the
additional features.
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE
User Guide allows you to more easily access the
detailed TV information.
(Home) button to access the
1 Press the
Home menu.
2 Select User Guide and press Wheel(OK).

yyUse the remote control within the
specified range (within 10 m). You may
experience communication failures when
using the device outside the coverage
area or if there are obstacles within the
coverage area.
yyYou may experience communication
failures depending on the accessories.
Devices such as a microwave oven
and wireless LAN operate in the same
frequency band (2.4 GHz) as the Magic
Remote. This may cause communication
failures.
yyThe Magic Remote may not work properly
if a wireless router (AP) is within 1 meter
of the TV. Your wireless router should be
more than 1 m away from the TV.
yyDo not disassemble or heat the battery.
yyDo not drop the battery. Avoid avoid
extreme shocks to the battery.
yyInserting the battery the wrong way may
result in explosion.
Using the User guide
NOTE
yy You can also access the User Guide by
(User Guide) in the remote
pressing
control. (Depending on model)
ENGLISH
ENG
Precautions to Take when Using
the Magic Remote
45
46
MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted
mild detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to ).
yy Check if the batteries are still working and properly installed ( to ,
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Sleep Timer or Timer Power Off feature is activated in the
Timers settings.
yy If there is no signal while the TV is on, the TV will turn off automatically
after 15 minutes of inactivity.
When connecting to
yy Turn the TV off/on using the remote control.
the PC (HDMI/DVI),
yy Reconnect the HDMI cable.
‘No signal’ or ‘Invalid
yy Restart the PC with the TV on.
Format’ is displayed.
SPECIFICATIONS
47
ENGLISH
ENG
SPECIFICATIONS
Wireless module(LGSBW41) Specifications
Wireless LAN
Standard
IEEE 802.11a/b/g/n
Standard
Bluetooth Version 3.0
Frequency
ragne
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
Frequency
ragne
2400 to 2483.5 MHz
Output power
(Max.)
802.11a: 13 dBm
802.11b: 15 dBm
802.11g: 14 dBm
802.11n - 2.4GHz: 16 dBm
802.11n - 5GHz: 16 dBm
Output power
(Max.)
10 dBm or Lower
he
or
ol.
).
ts.
Bluetooth
yyBecause band channel used by the country could be different, the user can not change or adjust
the operating frequency and this product is set for the regional frequency table.
yyThis device should be installed and operated with minimum distance 20 cm between the device
and your body. And this phrase is for the general statement for consideration of user environment.
0197
0197
48
SPECIFICATIONS
ENGLISH
ENG
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
42LB63**
47LB63**
55LB63**
42LB6310-TC
42LB631T-TC
42LB6330-TD
42LB633T-TD
42LB633Y-TD
42LB639Y-TD
47LB6310-TC
47LB631T-TC
47LB6330-TD
47LB633T-TD
47LB633Y-TD
47LB639Y-TD
55LB6310-TC
55LB631T-TC
55LB6330-TD
55LB633T-TD
55LB633Y-TD
55LB639Y-TD
960 x 610 x 218
1072 x 677 x 247
1241 x 772 x 247
Without stand (mm) 960 x 567 x 54.5
1072 x 629 x 54.5
1241 x 725 x 55.5
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
9.9
13.4
18.7
Without stand (kg)
9.6
13.0
18.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power requirement
32LB65**
32LB6500-TA
32LB650T-TA
32LB650V-TA
32LB6520-TB
32LB652T-TB
32LB652Y-TB
32LB659Y-TB
MODELS
32LB6500-TH
32LB650T-TH
731 x 484 x 207
731 x 475 x 185
Without stand (mm) 731 x 437 x 54.5
731 x 437 x 54.5
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
6.5
6.5
Without stand (kg)
6.3
6.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
39LB65**
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
39LB6500-TA
39LB650T-TA
39LB650V-TA
39LB6520-TB
39LB652T-TB
39LB652Y-TB
39LB659Y-TB
39LB6500-TH
39LB650T-TH
884 x 569 x 218
884 x 570 x 193
Without stand (mm) 884 x 524 x 54.5
884 x 524 x 54.5
With stand (kg)
8.6
8.6
Without stand (kg)
8.3
8.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
SPECIFICATIONS
42LB6500-TH
42LB650T-TH
960 x 610 x 218
960 x 612 x 193
Without stand (mm) 960 x 567 x 54.5
960 x 567 x 54.5
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
9.9
Without stand (kg)
9.6
9.6
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
9.9
47LB65**
47LB6500-TA
47LB650T-TA
47LB650V-TA
47LB6520-TB
47LB652T-TB
47LB652Y-TB
47LB659Y-TB
MODELS
Dimensions
(W x H x D)
Weight
47LB6500-TH
47LB650T-TH
1072 x 677 x 247
1072 x 675 x 230
Without stand (mm) 1072 x 629 x 54.5
1072 x 629 x 54.5
With stand (mm)
With stand (kg)
13.4
13.3
Without stand (kg)
13.0
13.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
50LB65**
50LB6500-TA
50LB650T-TA
50LB650V-TA
50LB6520-TB
50LB652T-TB
50LB652Y-TB
50LB659Y-TB
50LB6500-TH
50LB650T-TH
1127 x 710 x 247
1127 x 706 x 230
Without stand (mm) 1127 x 660 x 54.5
1127 x 660 x 54.5
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
14.7
Without stand (kg)
14.3
14.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
14.6
ENGLISH
ENG
42LB65**
42LB6500-TA
42LB650T-TA
42LB650V-TA
42LB6520-TB
42LB652T-TB
42LB652Y-TB
42LB659Y-TB
49
50
SPECIFICATIONS
ENGLISH
ENG
55LB65**
55LB6500-TA
55LB650T-TA
55LB650V-TA
55LB6520-TB
55LB652T-TB
55LB652Y-TB
55LB659Y-TB
MODELS
55LB6500-TH
55LB650T-TH
1241 x 772 x 247
1241 x 769 x 230
Without stand (mm) 1241 x 725 x 55.5
1241 x 725 x 55.5
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
18.7
18.6
Without stand (kg)
18.3
18.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
60LB65**
70LB65**
60LB6500-TA
60LB650T-TA
60LB650V-TA
60LB6520-TB
60LB652T-TB
60LB652Y-TB
60LB659Y-TB
70LB6560-TA
70LB656T-TA
70LB656V-TA
70LB656Y-TA
70LB659Y-TA
1351 x 834 x 271
1574 x 970 x 314
Without stand (mm) 1351 x 788 x 57.5
1574 x 919 x 60.2
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
With stand (kg)
22.4
31.6
Without stand (kg)
21.8
30.1
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
42LB67**
47LB67**
50LB67**
42LB6700-TA
42LB670T-TA
42LB670Y-TA
42LB679Y-TA
47LB6700-TA
47LB670T-TA
47LB670Y-TA
47LB679Y-TA
50LB6700-TA
50LB670T-TA
50LB670Y-TA
50LB679Y-TA
948.2 x 606.9 x 210.9
1059.9 x 671.9 x 247.5 1116.1 x 704.9 x 247.5
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
Without stand (kg)
Without stand (mm) 948.2 x 558.2 x 55.1
Power requirement
1059.9 x 621 x 55.1
1116.1 x 652.9 x 55.1
10.4
13.2
14.6
10.0
12.7
14.1
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
SPECIFICATIONS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
Without stand (kg)
42LB69**
47LB69**
55LB6700-TA
55LB670T-TA
55LB670Y-TA
55LB679Y-TA
42LB6900-TA
42LB690T-TA
42LB690Y-TA
42LB692V-TB
47LB6900-TA
47LB690T-TA
47LB690Y-TA
47LB692V-TB
1229.8 x 767.5 x 247.5 949 x 608 x 211
Without stand (mm) 1229.8 x 716.6 x 55.1
Power requirement
MODELS
949 x 560 x 55.1
1061 x 623 x 55.1
18.5
10.4
13.3
18
10
12.8
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
55LB69**
42LB72**
47LB72**
55LB6900-TA
55LB690T-TA
55LB690Y-TA
55LB692V-TB
42LB7200-TA
42LB720T-TA
42LB720Y-TA
42LB729Y-TA
47LB7200-TA
47LB720T-TA
47LB720Y-TA
47LB729Y-TA
1231 x 769 x 247
949 x 608 x 211
1061 x 670 x 247
949 x 560 x 55.1
1061 x 623 x 55.1
13.3
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
19
10.4
Without stand (kg)
18.5
10
Without stand (mm) 1231 x 718 x 55.1
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
Without stand (kg)
12.8
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
55LB72**
60LB72**
65LB72**
55LB7200-TA
55LB720T-TA
55LB720Y-TA
55LB729Y-TA
60LB7200-TA
60LB720T-TA
60LB720Y-TA
60LB729Y-TA
65LB7200-TA
65LB720T-TA
65LB720Y-TA
65LB729Y-TA
1231 x 769 x 247
1338.4 x 834.7 x 288.9 1449.5 x 883.7 x 313.9
Without stand (mm) 1231 x 718 x 55.1
Power requirement
1061 x 670 x 247
1338.4 x 778.8 x 58.1
1449.5 x 840.8 x 58.1
19
22.2
27.9
18.5
21.3
26.5
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
ENGLISH
ENG
MODELS
55LB67**
51
52
SPECIFICATIONS
ENGLISH
ENG
42LB75**
47LB75**
55LB75**
42LB7500-TE
42LB750T-TE
47LB7500-TE
47LB750T-TE
55LB7500-TE
55LB750T-TE
949 x 608 x 213
1061 x 666 x 227
1231 x 766 x 237
Without stand (mm) 949 x 560 x 55.1
1061 x 623 x 55.1
1231 x 718 x 55.1
13.7
19.6
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
10.7
Without stand (kg)
10
12.8
18.5
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
60LB75**
65LB75**
60LB7500-TE
60LB750T-TE
65LB7500-TE
65LB750T-TE
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm) 1338.4 x 778.8 x 58.1
With stand (kg)
27.9
Without stand (kg)
21.3
26.5
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
49LB87**
55LB87**
60LB87**
49LB870T-TA
49LB870Y-TA
49LB879Y-TA
55LB870T-TA
55LB870Y-TA
55LB879Y-TA
60LB870T-TA
60LB870Y-TA
60LB879Y-TA
1091 x 690 x 229
1227 x 769 x 229
1335 x 830 x 261
Without stand (mm) 1091 x 632 x 34.7
1227 x 709 x 34.7
1335 x 770 x 35.7
With sound bar
supporter (mm)
1091 x 688 x 34.7
1227 x 765 x 34.7
1335 x 826 x 35.7
With stand (kg)
17.4
22.6
27.1
Without stand (kg)
16.7
21.9
26.2
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Weight
1449.5 x 840.8 x 58.1
22.6
Power requirement
Dimensions
(W x H x D)
1338.4 x 826.2 x 268.4 1449.5 x 894.4 x 293.1
With stand (mm)
Power requirement
SPECIFICATIONS
Environment condition
100.0 mm x 55.0 mm x 5.0 mm
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
1 Only Satellite models.
Digital TV
(Depending on Country)
Analogue TV
(Depending on Country)
Television System
DVB-T3
DVB-T/T21
DVB-T/T2/C/S/S22
PAL B/B, PAL B/G, PAL D/K, PAL-I
SECAM B/G, SECAM D/K
NTSC-M
Programme Coverage
VHF, UHF
C-Band2, Ku-Band2
VHF, UHF, CATV
Maximum number of
storable programmes
DVB-T/T2 & Analogue TV : 1,500
DVB-S/S2 : 6,000
External Antenna Impedance
75 Ω
1 Only DVB-T2 support models.
2 Only DVB-T2/C/S2 support models.
3 Despite DVB-T model, DVB-T function does not apply in India and Philippines.
ENGLISH
ENG
CI Module Size1 (W x H x D)
53
(Only Jordan)
WEEE
Disposal of your appliance
The symbol indicating separate collection for electrical and electronic equipment
consists of the crossed-out wheeled bin.
0197
0197
For any Suggestion, Opinion,
Complaints, Please Call
800 54 in UAE
0800 54 54 54 in South Africa
080 100 54 54 in Morocco
19960 in Egypt
021 36 54 54 in Algeria
Other countries, Please contact our
local dealer or log into
http://www.lg.com
Record the model number and serial
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer
when requiring any service.
MODEL
SERIAL
(Only DTV)
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
KEY CODES
ENGLISH
ENG
KEY CODES
• This feature is not available for all models.
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
00
CH +, PR +
R/C Button
53
List
R/C Button
01
CH -, PR -
R/C Button
5B
Exit
R/C Button
02
Volume +
R/C Button
60
PIP(AD)
R/C Button
03
Volume -
R/C Button
61
Blue
R/C Button
06
> (Arrow Key / Right Key)
R/C Button
63
Yellow
R/C Button
07
< (Arrow Key / Left Key)
R/C Button
71
Green
R/C Button
08
Power
R/C Button
72
Red
R/C Button
09
Mute
R/C Button
79
Ratio / Aspect Ratio
R/C Button
0B
Input
R/C Button
91
AD (Audio Description)
R/C Button
0E
SLEEP
R/C Button
7A
User Guide
R/C Button
0F
TV, TV/RAD
R/C Button
7C
Smart / Home
R/C Button
R/C Button
7E
SIMPLINK
R/C Button
10 - 19 * Number Key 0 - 9
1A
Q.View / Flashback
R/C Button
8E
►► (Forward)
R/C Button
1E
FAV (Favorite Channel)
R/C Button
8F
◄◄ (Rewind)
R/C Button
20
Text (Teletext)
R/C Button
AA
Info
R/C Button
21
T. Opt (Teletext Option)
R/C Button
AB
Program Guide
R/C Button
28
Return (BACK)
R/C Button
B0
► (Play)
R/C Button
30
AV (Audio / Video) Mode
R/C Button
B1
ꕗ (Stop / File List)
R/C Button
39
Caption/Subtitle
R/C Button
BA
ꕘ (Freeze / Slow Play /
Pause)
R/C Button
40
Λ (Arrow Key / Cursor Up)
R/C Button
BB
Soccer
R/C Button
41
V (Arrow Key / Cursor
Down)
R/C Button
BD
ꔄ (REC)
R/C Button
42
My Apps
R/C Button
DC
3D
R/C Button
43
Menu / Settings
R/C Button
99
AutoConfig
R/C Button
44
OK / Enter
R/C Button
9F
App / *
R/C Button
45
Q.Menu
R/C Button
4C
List, - (ATSC Only)
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
(PC)
USB IN
RS-232C With RS232C Cable
(PC)
(TV)
SERVICE ONLY
DE9 (D-Sub 9pin) Type
1
• You need to purchase the RS-232C (DE9, D-Sub
3 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.
(PC)
2
RS-232C IN
(CONTROL & SERVICE)
(PC)
SERVICE ONLY
1
3
RS-232C IN
(CONTROL & SERVICE)
2
(PC)
(TV)
1
3
(PC)
The connection interface may differ from your TV.
(TV)
2
(TV)
(TV)
1
3
(PC)
RS-232C IN
2
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
(TV)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
USB USB
IN IN
4
EXTERNAL CONTROL DEVICE SETUP
(PC)
(PC)
(TV)
(TV)
RS-232C IN
(CONTROL
SERVICE)
• You need to purchase the phone-jack to RS-232 cable required
for &the
connection between the PC and
the TV, which is specified in the manual.
RS-232C IN
(PC)
(PC)
(CONTROL & SERVICE)
* For other models, connect to the USB port.
* The connection interface may differ from your TV.
1
3
(PC)
(PC)
1
3
2
2
- or
(TV)
(TV)
(TV)
(TV)
1
3
(PC)
(PC)
SERVICE
ONLY ONLY
SERVICE
ENGLISH
ENG
Phone jack Type
1
3
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
2
Customer Computer
(TV)
(TV)
RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC
RXD
RS-232C IN
(CONTROL & SERVICE)
TXD
RS-232C IN
(CONTROL & SERVICE)
GND
6
2
2
TXD
3
1
RXD
5
3
GND
OR
9
RS-232C
(Serial port)
TV
RXD
3
2
TXD
TXD
2
1
RXD
GND
5
3
GND
D-Sub 9
Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
* (Depending on model)
EXTERNAL CONTROL DEVICE SETUP
5
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
ENGLISH
ENG
Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power*
k
a
00 to 01
02. Aspect
Ratio
k
c
(p.7)
03. Screen
Mute
k
d
(p.7)
k
e
00 to 01
k
f
00 to 64
06. Contrast
k
g
00 to 64
07.
Brightness
k
h
00 to 64
08. Color/
Colour
k
i
00 to 64
04. Volume
Mute
05. Volume
Control
09. Tint
k
10.
k
Sharpness
11. OSD
k
Select
12. Remote
Control Lock k
Mode
j
00 to 64
k
00 to 32
l
00 to 01
m
00 to 01
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
COMMAND1 COMMAND2
DATA
(Hexadecimal)
15. Balance k
16. Color
(Colour)
x
Temperature
17. ISM
Method (Only j
Plasma TV)
t
00 to 64
u
00 to 64
p
(p.8)
18. Equalizer j
v
(p.8)
q
00 to 05
a
(p.9)
b
00 to 01
19. Energy
j
Saving
20. Tune
m
Command
21. Channel m
(Programme)
Add/Del(Skip)
22. Key
m
c
Key Codes
23. Control
Backlight,
Control Panel
Light
24. Input
select (Main)
25. 3D (Only
3D models)
26. Extended
3D (Only 3D
models)
27. Auto
Configure
m
g
00 to 64
x
b
(p.11)
x
t
(p.11)
x
v
(p.11)
j
u
(p.12)
* Note:During playing or recording media, all commands except Power (ka) and Key (mc) are not
executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...
32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...
FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...
EXTERNAL CONTROL DEVICE SETUP
7
01.Power (Command: k a)
►► To control Power *On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : *Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.
02.Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
(Latin America
(Europe, Colombia, Midexcept Colombia
East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : C
inema Zoom 1
Original
to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04.Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05.Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06.Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.
07.Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
03.Screen Mute (Command: k d)
►► To select screen mute on/off.
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
08.Color/Colour (Command: k i)
►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
ENGLISH
ENG
* Commands may work differently depending on model and signal.
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Data Min : 00 to Max : 64
* (Depending on model)
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
09.Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10.Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
14. Bass (Command: k s)
►► To adjust Bass.
You can also adjust in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)
15.Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
16.Color(Colour) Temperature (Command: x u)
11.OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
17.ISM Method (Command: j p) (Only Plasma TV)
12.Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
18.Equalizer (Command : j v)
►► Adjust EQ of the set.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
0
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
0
0
0
0
Frequency
13. Treble (Command: k r)
►► To adjust treble.
You can also adjust in the AUDIO menu.
LSB
0
0
0
Data
7
6
5
Frequency
4
3
2
1
0
Step
0
0
0
1st Band
0
0
0
0
0
0(decimal)
0
0
1
2nd Band
0
0
0
0
1
1(decimal)
0
1
0
3rd Band
...
...
...
...
...
...
0
1
1
4th Band
0
0
0
1
1
19(decimal)
EXTERNAL CONTROL DEVICE SETUP
0
0
5th Band
0
0
1
0
1
20(decimal)
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
* It depends on model, and can adjust when sound
mode is EQ adjustable value.
19.Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2.Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3.Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except
Colombia Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
20.Tune Command (Command: m a)
* This command may work differently depending on
model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
* Analog Antenna/Cable
[Data 00][Data 01] Channel Data
Data00 : High byte channel data
Data01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)
* Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data00 : High Channel data
Data01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
* Tune Command Examples:
1.Tune to the Analog antenna (PAL) Channel 10.
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
* Analog Antenna/Cable
Data00 : Physical Channel Number
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data01 & 02: xx (Don't care)
Data03 & 04: xx (Don't care)
Data05: Input Source (Analog)
- 00 : Antenna TV (ATV)
- 01 : Cable TV (CATV)
* Digital Antenna/Cable
Data00 : xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data01 : High byte Channel Data
Data02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data03 : High byte Channel Data
Data04 : Low byte Channel Data
Data05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
ENGLISH
ENG
1
9
10 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Number
- 22 : Antenna TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
* Tune Command Examples:
1.Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01
2.Tune to the digital antenna (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02
2.Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
21.Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
22.Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
* Digital Antenna/Satellite
Data 00: xx (Don't care)
DataKey code - p.2.
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
23.Control Backlight (Command: m g)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
01 : Add
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
• For LCD TV / LED TV
►► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
►► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
O
01
X
X
X
02
X
X
X
03
X
O
O
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
21 : AV2
40 : Component1
60 : RGB
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
26.Extended 3D(Command: x v) (only 3D models)
(Depending on model)
►► To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
25.3D(Command: x t) (only 3D models)
(Depending on model)
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
* (Depending on model)
DataStructure
[Data 00]00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]00 : Right to Left
01 : Left to Right
[Data 03]3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* [Data 02], [Data 03] functions depend on model
and signal.
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03 (2D to 3D), [Data 01] and
[Data 02] have no meaning.
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 02]
O
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
20 : AV or AV1
[Data 01]
O
X : don’t care
[Data 00]
00
[Data 03]
[Data 00]3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01]It has own range for each 3D option
determined by [Data 00].
1) When[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When[Data 00] is 01, 02
DataMin: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual
only.
3) When[Data 00] is 06, 07
00 : Off
01 : On
4) When[Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 2D video
01 : Change 3D video to 2D video, except
2D-to-3D video
* If conversion condition doesn’t meet, command is
treated as NG.
5) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
05 : Auto
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]
ENGLISH
ENG
24.Input select (Command: x b)
(Main Picture Input)
11
12 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
27.Auto Configure (Command: j u)
(Depending on model)
►► To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Download PDF

advertising