LG | MT-42PZ14 | LG MT-42PZ12 Owner’s Manual

Please read this owner's manual
operating
carefully
before
the Monitor.
Retain it for future reference.
Record model number and serial number of the
Monitor.
See the label attached
on
the back of the Monitor
and quote this information to your dealer when you
require service.
Model number
Serial number
:
:
ON/OFF
PLASMONITR
MZ-42PZ10/B/G/K/S
MT-42PZ10/B/G/K/S
OWNER'S MANUAL
INPUT
SELECT
VOLUME
LG Plasma Monitor
What is
Plasma Monitor?
a
If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a
fluorescent substance. At this moment, light is emitted. A Plasma Monitor is a next generation flat Display using this phenomenon.
160°
-
Wide
angle range
of vision
A Plasma Monitor provides more than 160° angle range of vision
picture without distortion from any direction.
Easy
that you
can
get
a
installation
A Plasma Monitor is much lighter and smaller than other
can install the Plasma Monitor at the desired place.
Big
so
same
class
products
so
that you
screen
The screen of
in a theatre.
a
Plasma Monitor is 42"
so
that you
can
get vivid experience
as
if you
are
Multimedia Plasma Monitor
A Plasma Monitor can be connected with
for conference, game, internet and so on.
The
explanation
a
computer
so
that you
can use
about coloured dots may be present
on
it
as a screen
PDP
screen
The PDP which is the display device of this product is composed of 0.9 to 2.2 million cells
and a few cell defects can occur in the manufacture of the PDP. Several coloured dots visible on the screen would be acceptable, in line with other PDP manufacturers and would
not mean that the PDP is faulty. We hope you will understand that the product which corresponds to this standard is regarded as acceptable. It means that it could not be changed
or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
WARNING
This is Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
ON/OFF
INPUT
SELECT
VOLUME
Contents
First step
Instructions ....................................................4
Safety
Composition
Controls of the Monitor .............................................8
Controls of the remote control ................................12
Installation of the Monitor .......................................14
Connection
Watching VCR ........................................................16
Watching Cable TV.................................................17
Watching external AV source..................................18
Watching DVD ........................................................19
Connecting PC .......................................................20
Function checking in PC mode ..............................22
Adjusting in PC mode .............................................23
Using the remote control ........................................26
Basic function
Turning on the Monitor ...........................................27
Selecting the on screen language ..........................28
Function checking...................................................29
Picture
Picture adjustment..................................................30
Picture format .........................................................31
Sound
Sound adjustment...................................................32
function
Child lock ................................................................33
Auto sleep...............................................................34
Sleep timer .............................................................35
Special
Others
Troubleshooting check list ......................................36
Product specifications.............................................39
Safety
-
Instructions
Use the Monitor at the place lower than the altitude of 6562 feet
the best quality of picture and sound.
WARNING
Indorstali
This may
cause a
to
get
NOTES
Do not place the Monitor in
direct sunlight or near heat
sources such as heat registers,
stove and so on.
-
(2000m)
This Plasma display is designed
to be mounted horizontally
(wide viewing).
fire.
WARNING
Do not
the Monitor in
such as a bathany place where it
use
damp place
room or
OutdorInsali
is
likely
to
get
wet.
-
This may cause a fire or could
give an electric shock.
-
Bend antenna cable between
inside and outside building to prevent rain from flowing in.
This may cause water damaged inside
the Monitor and could give an electric
shock.
WARNING
NOTES
Earth wire should be connected.
-
-
Power
-
If the earth wire is not connected,
there is possible a danger of electric
shock caused by the current leakage.
If grounding methods are not possible, a separate circuit breaker should
be employed and installed by a
qualified electrician.
Do not connect ground to telephone
wires, lightning rods or gas pipe.
Short-circuit
breaker
4
Never touch the power
with a wet hand
-
This may
cause an
plug
electric shock.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
below.
as
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
or
and
even
damage
First ep
death.
of the
product.
Take
care
of
danger that may happen
NOTES
under
specific condition.
Compsiton
NOTES
Do not place the Monitor in
built-in installation such
as a bookcase or rack.
Disconnect from the mains
and remove all connections before moving.
a
Ventilation
-
required.
When
installing
the Monitor
on a
table, be careful not to place the
edge
of its stand.
This may cause the Monitor to fall,
causing serious injury to a child or adult,
and serious damage to the Monitor.
-
NOTES
Do not place an outside antenna in
the vicinity of overhead power lines
other electric light or power circuits.
-
This may
cause an
electric shock.
or
There should be enough distance between an
outside antenna and power lines to keep the former from touching the latter even when the
antenna falls.
-
ConectiBasfu
Picture
This may cause
an electric shock.
Sound
NOTES
Do not pull the cord but the
when unplugging.
plug
-
This may
cause a
fire.
Ensure the power cord
doesn't trail across any hot
objects like a heater.
-
This may cause
tric shock.
a
fire
or an
elec-
Specialfunto
Do not plug when the power
cord or the plug is damaged
or the connecting part of the
power outlet is loose.
-
This may cause a fire
an electric shock.
or
Others
5
Safety
Instructions
WARNING
Do not place anything containing liquid on top of the
Monitor.
-
Using
Do not insert any
the exhaust vent.
-
This may cause a fire or could
give an electric shock.
object
This may cause a fire
an electric shock.
or
into
could
give
WARNING
Do not use water the Monitor
while cleaning.
-
Cleanig
This may cause damaged the
Monitor or could give an electric
shock.
In case of smoke or strange
smell from the Monitor, switch it
off ,unplug it from the wall outlet
and contact your dealer or service center.
-
This may cause a fire
an electric shock.
or
could
give
WARNING
Do not attempt to service
the Monitor yourself.
Contact your dealer or service center.
Others
6
-
This may cause damaged the
Monitor or could give an electric
shock.
During
unplug
a
lightning thunder,
the Monitor from the
wall outlet and don't touch an
antenna cable.
-
This may cause damaged the
Monitor or could give an
electric shock.
WARNING in U.K.
*
This set is
only
with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
supplied
WARNING
Do not place heavy
the Monitor.
Compsiton
NOTES
Dispose of used batteries
carefully to protect a child
from eating them.
objects
on
-
First ep
This may cause serious
a child or adult.
injury
to
-
In
case
to
see a
that it eats them, take it
doctor immediately.
When moving the Monitor
assembled with the
Speakers do not carry holding the Speakers.
-
This may
cause
the Monitor to
fall, causing serious injury
child or adult, and
to
ConectiBasfu
a
serious
damage
to the
Monitor.
NOTES
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners.
-
This may cause damaged the Monitor
an electric shock.
or
could
Contact the service center once a year to
clean the internal part of the Monitor.
-
Accumulated dust
can cause
Picture
mechanical failure.
give
Sound
NOTES
The distance between eyes
and the screen should be
about5~7timesaslongas
diagonal length of the
screen.
-
If not, eyes will strain.
Unplug the Monitor from the
wall outlet when it is left
unattended and unused for
long periods of time.
-
Accumulated dust may cause
fire or an electric shock from
deterioration or
electric leakage.
a
Only
use
the
specified
bat-
teries.
-
This make cause damaged the
remote control or could give an
electric shock.
Specialfunto
Others
7
Controls of the Monitor
<Front Panel>
ON/OFF
INPUT
SELECT
ON/OFF
VOLUME
MAIN POWER BUTTON
REMOTE CONTROL SENSOR
INPUT
SELECT
VOLUME
INPUT SELECT BUTTON
POWER/STANDBY INDICATOR
Illuminates red in standby
Illuminates green when the Monitor is switched
POWER BUTTON
on
VOLUME (Φ,Γ) BUTTON
8
First ep
Compsiton
<Back Panel>
(+)
R
()
()
L
COMPONENT
(480i/480p)
(DVD INPUT)
AV INPUT
EXTERNAL SPEAKER
RL
AUDIO <MONO> VIDEO
(+)
Y
PB
RGB
INPUT(VGA/SVGA/XGA)
PR
AUDIO INPUT
R
CONTROL
ConectiBasfu
AC INPUT
L
Picture
(+)
R
()
()
L
COMPONENT
AV INPUT
EXTERNAL SPEAKER
(+)
R
AUDIO
L
Y
R
AUDIO
L
(MONO)
(480i/480p)
(DVD INPUT)
Y
(MONO) VIDEO
VIDEO
AV INPUT
PB
RGB
PR
PB
P
AUDIO INPUT
R
CONTROL
Sound
AC INPUT
L
R
COMPONENT (480i/480p)
(DVD INPUT)
EXTERNAL
AV INPUT /
SPEAKER (8Ω)
KNOBS
COMPONENT (480i/480p)
DVD INPUT SOCKETS
Γ The Interface board
is not equipped
MZ-42PZ10 series model.
(AP-42EA20)
INPUT(VGA/SVGA/XGA)
on
RGB INPUT (VGA/SVGA/XGA) /
AUDIO INPUT / CONTROL
SOCKET
POWER INPUT
SOCKET
This Monitor operates
on an AC mains supply,
the voltage is as indicated as inside back cover
of this manual. Never
apply DC power to the
Monitor.
9
Specialfunto
Others
Accessories
POWER
MULTIMEDIA
TV/AV
ARC
I/II
PIP
TEXT
PR-
PR+
SWAP
MENU
VOL
INPUT
PR
MUTE
OK
VOL
PR
1
4
7
PSM
POSTION
cable
Power cord
MIX
SLEEP
P/STILL
PLAY
?
LIST
REC
FF
Remote control
Alkaline batteries
Phone scart cable
(Optional)
(Optional)
Extras
Optional
Optional extras can be changed or modified
optional extras can be added.
Contract your dealer for buying these items.
ON/OFF
M
1.5V
Owner's Manual
-
SSM
STILL
REVEAL
1.5V
LG TV
ASmark
-
6
9
0
TIME
REW
pin
3
5
8
SIZE
STOP
D-sub 15
2
STROBE/
MULTIMEDIA
TV/VIDEO
MENU
ENTER
VOL
for
without any notification
quality improvement
PR
CH
PB
Y
AUDIO
RL
(MONO)
VIDEO
(480/480p)
COMPONENT
INPUT)
(DVD
AV INPUT
RZ-BA10
(PDP Tuner)
AP-42WA20M series
(Tilt
10
wall
mounting bracket)
AP-42EA20
(Interface board)
AP-42WA10 series
(Wall mounting bracket)
new
Optional
-
-
First ep
Extras
Optional extras can be changed or modified
optional extras can be added.
Contract your dealer for buying these items.
for
quality improvement
without any notification
AP-42CA10 series
AP-42FA10 series
(Ceiling mounting bracket)
(Floor type stand)
AP-42DA10 series
AP-42SA10 series
(Desktop stand)
(Speakers)
new
Compsiton
ConectiBasfu
Picture
Sound
AP-42SA10D series
AP-42SA10F series
(Speaker stand)
(Floor type speaker stand)
Specialfunto
Others
Video cables
Audio cables
11
Controls of the remote control
-
-
Some buttons on this remote control does function only when the Monitor is
nected with RT/RZ-BA10 (the PDP tuner).
When using the remote control aim it at the remote control sensor of the Monitor.
con-
POWER
POWER button
MULTIMEDIA
TV/AV
ARC
I/II
PIP
TEXT
MULTIMEDIA button
ARC button (Refer to
p.31)
No function
PR-
No function
PR+
SWAP
MENU
INPUT
PR
MUTE
MENU button
OK button
VOL
OK
VOL
VOLUME (Φ, Γ) buttons
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
No function
PSM button (Refer to
p.30)
POSITION
STROBE/
STILL
SIZE
TIME
REVEAL
MIX
STOP
VCR buttons
controls
a
LG video cassette
recorder.
12
REW
SLEEP
M
P/STILL
PLAY
LIST
REC
FF
?
First ep
TV/AV button
on
Compsiton
the remote control
Each press of this button
the mode as below.
changes
TV/AV button
When the Interface
board
AV
No function
(not supplied)
is
installed.
Γ The Interface board
No function
(AP-42EA20) is not
equipped on MZ-42PZ10
series model.
RGB-PC
MUTE button
switches the sound
on or
COMPONENT
off.
MULTIMEDIA button
on
the remote
control
Ε
/
Δ
Each press of this button
the mode as below.
buttons
changes
RGB-PC
ConectiBasfu
Picture
COMPONENT
SSM button (Refer to
p.32)
Sound
No function
SLEEP button (Refer to
p.35)
Specialfunto
Others
13
Installation of the Monitor
-
The Monitor
can
be installed in various ways such
desktop type,
To install
as
wall
INPUT
SELECT
MUTIMDA
N/OFF
The monitor
can
be installed
on
further information, refer to
(For
mounting type,
mounting type
ON/OFF
?
wall
as
etc..
the wall
'(Tilt)
TVAV
MNU
VOL
PR
picture above.
mounting bracket owner's manual'.)
as
wall
OK
VOLUME
the
Tips
?
Install this monitor
only
in
a
location where
a.
(Wall
adequate
ventilation is available.
4inch
mount minimum
1.18inch
allowable clearances
for adequate ventilation)
4inch
4inch
4inch
14
First ep
To install
as
Compsiton
desktop type
INPUT
SELECT
ON/OFF
ConectiBasfu
VOLUME
Picture
?
The monitor
(For
on
the desk
as
further information, refer to
'Desktop
stand owner's
can
be installed
the
picture
Sound
above.
manual'.)
Specialfunto
b.
4inch
mount minimum
allowable clearances for
(Pedestal
1.18inch
adequate ventilation)
4inch
4inch
Others
2.36inch
15
Watching VCR
-
When
-
-
-
connecting
yellow, Audio(L)
the Monitor with external
(+)
()
L
R
()
R
(+)
R
AUDIO L
L
Y
PB
COMPONENT
RGBINPUT(VGA/SVGAXGA)
AUDIO NPUT
R
PR
(480i/480p)
PB
PB
P
(L)
(VGA/SVGA/XGA)
AUDIO INPUT
R
CONTROL
L
R
COMPONENT (480i/480p)
(DVD INPUT)
<Back
AUDIO
of time. Typically a frozen still picfixed image may remain visible on
VIDEO
PUT
OUT
(R)
of the
AC INPUT
PR
Back
S-VIDEO
CONTROL
AUDIO(L/MONO) input
L
RGB INPUT
(DVD INPUT)
Y
(MONO) VIDEO
(MONO)
AV
(480i/480p)
(DVDINPUT)
RL
AUDO <MONO>VIDEO
Y
AUDIO
COMPONENT
AV INPUT
() L (+)
AV INPUT
EXTERNAL SPEAKER
()
cable from the VCR to the
image remain on the screen for a long period
picture format or if a CH label is present; the
EXTERNAL SPEAKER
R
connecting ports (Video
-
If you have a
Monitor.
Avoid having a fixed
ture from a VCR, 4:3
the screen.
(+)
match the colours of
equipments,
white, Audio(R) red).
mono VCR, connect the audio
-
of the Monitor
panel
panel
of VCR>
VIDEO
IN
To watch VCR
Γ The Interface board
1
2
(When the Interface board is installed.)
(AP-42EA20)
is not
equipped
on
MZ-42PZ10 series model.
Press TV/AV button on the remote control to select AV.
(Select AV if AV INPUT is connected.)
TV/AV
Insert a video tape into the VCR and press the PLAY
button on the VCR.
Tips
?
16
To prevent
picture noise, place
the VCR
more
than 50cm away from the Monitor.
Watching Cable
-
After subscribing for
cable TV.
a
First ep
TV
local cable TV station and
installing
a
converter you can watch
Compsiton
R
(+)()
(+)
R
()
()
L
() L (+)
R
(+)
R
AUDIO
AUDIO
L
L
(MONO)
PUT
Y
PB
RGBINPUT
(VGA/SVGA/XGA)
Y
VIDEO
(480i/480p)
PB
AUDIO NPUT
R
PR
PB
CONTROL
AC INPUT
L
RGB INPUT
(VGA/SVGA/XGA)
PR
P
AUDIO INPUT
R
ConectiBasfu
CONTROL
L
R
COMPONENT (480i/480p)
(DVD INPUT)
Back
UDI
Y
(DVD INPUT)
(MONO) VIDEO
AV
(480i/480p)
(DVDINPUT)
RL
AUDIO <MONO> VIDEO
COMPONENT
AV INPUT
EXTERNAL SPEAKER
COMPONENT
AV INPUT
EXTERNAL SPEAKER
panel
of the Monitor
Picture
VO
<Cable box>
TV
VCR
RF
Cable
Sound
To watch cable TV (When the
Γ The Interface board
1
2
(AP-42EA20)
Press TV/AV button
on
is not
Interface board is
equipped
on
the remote control
to select AV.
(Select AV if AV INPUT is
installed.)
MZ-42PZ10 series model.
Specialfunto
TV/AV
connected.)
Select your desired programme with the
remote control for cable box.
Others
Tips
?
For further information of cable TV, contact the local cable TV station.
17
external AV
Watching
-
When
connting the
connecting ports.
Monitor with external
AV INPUT
EXTERNAL SPEAKER
(+)
R
()
()
L
()
()
L
(+)
(+)
R
R
AUDIO L
RL
AUDIO
L
AV
(MONO) VIDEO
(MONO)
COMPONENT
VIDEO
(480i/480p)
(DVD INPUT)
Y
PB
Y
RGB INPUT(VGA/SVGA/XGA)
(480i/480p)
PB
AUDO INPUT
R
PR
PB
match the colours of
equipments,
(DVD INPUT)
Y
AUDIO
<MONO>
COMPONENT
AV INPUT
EXTERNAL SPEAKER
(+)
R
CONTROL
source
AC INPUT
L
RGB INPUT
AUDIO INPUT
(VGA/SVGA/XGA)
PR
R
CONTROL
L
PR
VIDEO
COMPONENT
(480i/480p)
(DVD INPUT)
PUT
Camcorder
R
AUDIO
VIDEO
Video game set
To watch external AV
source
(When the Interface board is installed.)
Γ The Interface board
1
Press TV/AV button
AV.
2 Operate
18
(AP-42EA20)
the
on
is not
equipped
on
MZ-42PZ10 series model.
the remote control to select
corresponding
external
equipment.
TV/AV
How to connect (When
Γ The Interface board
?
?
First ep
DVD
Watching
the Interface board is
is not
(AP-42EA20)
equipped
DVD input is set as 480i/480p mode.
Connect DVD video inputs to Y, PB, PR of COMPONENT
audio inputs to Audio sockets of AV INPUT.
(+)
R
()
L
()
()
()
R
(+)
AUDIO L
L
(MONO)
PB
(480i/480p)
C
MPONENT (4
(DVD INP
CONTROL
(480i/480p) (DVD INPUT)
Compsiton
and
ConectiBasfu
AC INPUT
L
RGB INPUT
AUDIO INPUT
(VGA/SVGA/XGA)
PR
R
CONTROL
L
PR
PB
VIDEO
PUT
AUDOINPUT
R
PR
PB
Y
L
AV
Y
(DVD INPUT)
Y
(MONO) VIDEO
R
AUDIO
RGBINPUT(VGA/SVGAXGA)
(480i/480p)
(DVDINPUT)
RL
AUDO <MONO>VIDEO
(+)
COMPONENT
AV INPUT
EXTERNAL SPEAKER
(+)
R
COMPONENT
AV INPUT
EXTERNAL SPEAKER
installed.)
MZ-42PZ10 series model.
on
i/480p)
)
Picture
<
Back
panel
of the Monitor>
Sound
(R)
<
AUDIO
(L)
Back
panel
of
a
DVD
player>
?
How to
(When the Interface board is installed.)
Γ The Interface board
Component Input ports
can get better picture quality if you
connect DVD player with component input
You
use
(AP-42EA20)
is not
equipped
on
ports
as
below.
MZ-42PZ10
series model.
Component ports
of the
Monitor
?
?
Press MULTIMEDIA or TV/AV button on the remote
control to select COMPONENT.
Try this after turning on the DVD player.
Video
output ports
of DVD
player
Specialfunto
YPBPR
Y
Y
Y
Pb
B-Y
Cb
Pr
R-Y
Cr
19
Others
PC
Connecting
-
You
can
vivid
enjoy
picture
and sound with
connecting
a
PC with the Monitor.
How to connect
?
?
?
?
?
Set the video mode of PC to VGA/SVGA/XGA to obtain the best picture quality for the Monitor.
If the resolution of PC is over XGA, there will be no picture on the Monitor.
Connect the signal cable from the monitor output port of the PC to the RGB
INPUT(VGA/SVGA/XGA) port of the Monitor.
Connect the audio cable from the PC to the Audio ports of the Monitor. (Audio cables not included with the Monitor)
In case of using a sound card adjust PC sound properly.
(+)
R
()
()
L
()
()
L
(+)
(+)
R
AUDIO
L
AUDIO
L
(MONO)
Back
How to
panel
PB
RGB INPUT(VGA/SVGA/XGA)
AUDOINPUT
R
PR
(480i/480p)
CONTROL
AC INPUT
L
RGB INPUT
(VGA/SVGA/XGA)
PR
PB
PB
AUDIO INPUT
R
CONTROL
L
PR
VIDEO
AV INPUT
<
Y
(DVD INPUT)
Y
(MONO) VIDEO
Y
R
(480/480p)
(DVD INPUT)
RL
AUDO <MONO>VIDEO
COMPONENT
AV INPUT
EXTERNAL SPEAKER
(+)
R
COMPONENT
AV INPUT
EXTERNAL SPEAKER
COMPONENT (480i/480p)
(DVD INPUT)
of the Monitor>
use
MULTIMEDIA
TV/AV
?
Press POWER button on the PC and press ON/OFF button
the Monitor. After this press
button on the Monitor or
press POWER button on the remote control.
Press MULTIMEDIA or TV/AV button on the remote control to select RGB-PC.
Set the resolution of PC under XGA (1024x768).
on
?
<On the remote control>
?
(Refer
to page
21.)
Tips
?
?
?
20
If still picture is on the screen for a long period time, Screen Burn !
If the resolution of PC is over XGA, connect to the RGB INPUT(VGA/SVGA/XGA) port of
the Monitor after changing the resolution of PC under XGA.
If picture isn't be displayed properly by conneting a non-standard PC, contact your dealer
for more information.
First ep
Displayable
Resolution
Monitor
Horizontal
Specification
Vertical
Frequency (KHz) Frequency (Hz)
640x400
37.861
85.08
720x400
31.469
70.08
31.469
59.94
35.000
66.66
37.861
72.80
37.500
75.00
43.269
85.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
53.674
85.06
832x624
49.725
74.55
1024x768
48.363
60.004
(Compressed
XGA)
56.476
70.069
60.023
75.029
640x480
(VGA)
800x600
(SVGA)
Compsiton
ConectiBasfu
Picture
Sound
Specialfunto
Others
21
Function
-
Make
sure
to select RGB-PC before
1
MENU
in PC mode
checking
operating.
the MENU button.
Repeatedly press
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
ΔΕ
ΦΓ
0
OK
<Picture
Clock
MENU
TV/AV
menu>
0
Equalizer
0
Balance
Flat
0
15
phase
Auto-configure
Reset
ΔΕ
ΦΓ
OK
MENU
<Special
PR
2
ΔΕ
Δ
The selected
/
Ε
VOL
3
OK
button to select
menu
PR
VOL
Press the Φ /
item.
ΦΓ
OK
MENU
<Sound
menu>
Press the
?
TV/AV
Γ
item
changes
button to
TV/AV
menu>
a menu
item.
from white to
purple.
change
the
setting of
a
menu
?
Press the TV/AV button to exit.
Tips
when Equalizer is set to User, Treble and Bass are displayed and
be adjusted.
Language is displayed only in PC mode (special menu) when the Interface
board is not installed and you can select your desired Language.
ΓThe Interface board (AP-42EA20) is not equipped on MZ-42PZ10 series
model.
?
Only
can
?
22
Auto
-
configure
This function is for the automatic
1
First ep
in PC mode
Adjusting
adjustment
Repeatedly press the MENU
special menu.
of the
screen
position
and clock
Compsiton
phase.
button
to select the
0
0
Clock
15
phase
Auto-configure
ConectiBasfu
Reset
MENU
ΔΕ
2
Press the
ΦΓ
OK
MENU
TV/AV
/ Ε button to select Autoand then press the Φ / Γ
Δ
configure
button.
0
0
Clock
15
phase
Auto-configure
Picture
Reset
PR
VOL
VOL
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
Sound
3
Press the OK button.
Specialfunto
OK
?
If
picture
Monitor's
needs to be
position
adjusted more after auto adjustment, adjust your
phase manually.
and clock
Others
23
in PC mode
Adjusting
Adjusting
1
horizontal / vertical
Repeatedly press the MENU
special menu.
postion
button
to select the
0
0
Clock
15
phase
Auto-configure
Reset
MENU
ΔΕ
2
PresstheΔ/Εbuttontoselect
or
MENU
TV/AV
0
0
Clock
VOL
VOL
?
?
Select
Select
15
phase
Auto-configure
Reset
ΔΕ
PR
ΦΓ
OK
MENU
TV/AV
for horizontal position adjustment.
for vertical position adjustment.
Press the Φ / Γ button to adjust until you get desired horizontal
vertical position and then press the OK button.
OK
VOL
24
OK
.
PR
3
ΦΓ
VOL
or
First ep
clock
Adjusting
?
1
In case that picture isn't
adjust phase manually.
phase
clear after auto
adjustment
Repeatedly press the MENU
special menu.
and
especially
that characters
are
Compsiton
trembling,
button
to select the
0
0
Clock
15
phase
Auto-configure
Reset
ConectiBasfu
MENU
ΔΕ
2
Press the
Δ
/
Ε
ΦΓ
OK
MENU
TV/AV
button to select Clock
phase.
0
0
Clock
15
phase
Auto-configure
Reset
PR
ΔΕ
ΦΓ
OK
MENU
TV/AV
Picture
PR
3
Press the
button.
Φ
/
Γ
button to
adjust phase
and then press the OK
Sound
OK
VOL
VOL
Specialfunto
Initializing
?
To initialize the adjusted value, select Reset with the
press the Φ / Γ button.
Δ
/
Ε
button and then
Others
25
Using
Inserting
the remote control
batteries
?
the
Open
battery compartment
cover on
side and insert the batteries with correct
?
Apply
two 1.5V alkaline batteries of AAA
Don't mix the used batteries with
?
Notes for
Make
sure
objects
26
using
there
are no
between the
new
Install the batteries with the correct
the back
polarity.
type.
batteries.
polarities.
the remote control
Don't
place
near a
the remote control
heater
remote control and its
Strong impact
sensor.
trol may
damp place.
or
cause
on
the remote
operation
con-
failure.
Signal
from the remote control
may be disturbed by sun light or
other strong light. In this case,
turn the set to other direction.
Turning
-
When
using
Turning
aim it at its
the Monitor
just
sensor on
First ep
the Monitor
the Monitor.
Compsiton
after installation
correctly.
ConectiBasfu
Press the ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
INPUT SELECT button on the
Monitor or press the TV/AV, MULTIMEDIA button on the remote control and
then the Monitor will be switched on.
2
,
Turning
2
on
control,
Connect power cord
1
1
the remote
on
on
the Monitor
(power
cord is still
If the Monitor is turned off with the
?
connected)
button
on
the Monitor
Press the
INPUT SELECT button on the Monitor or press the TV/AV,
MULTIMEDIA button on the remote control to turn on the Monitor.
,
If the Monitor is turned off with the ON/OFF button
?
Press the ON/OFF button
on
the Monitor to turn
on
on
Picture
the Monitor
the Monitor.
Sound
3
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
?
Press the ON/OFF button on the Monitor and then press the
INPUT
SELECT button on the Monitor or press the TV/AV, MULTIMEDIA button
the remote control to turn on the Monitor.
Specialfunto
,
Tips
Adjusting
Volume(Γ)
?
volume level
button increases the level of sound and
decreases the level of sound.
volume(Φ)
on
Others
button
27
Selecting
1
the
language
on screen
Repeatedly press the MENU
special menu.
button
to select the
Child lock
Off
Auto
Off
sleep
Language
MENU
ΔΕ
2
Press the
/ Ε button to select
Language and then press the OK but-
ΦΓ
OK
MENU
TV/AV
Δ
ton.
PR
Child lock
Off
Auto
Off
sleep
Language
OK
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
3
Press the
Δ
/
Ε or Φ
/
Γ
button to select the desired
language.
PR
VOL
VOL
PR
4
Press the TV/AV button to exit.
TV/AV
Tips
You can select your desired language only in AV mode (when the Interface board
is installed) or PC mode (when the Interface board is not installed).
ΓThe Interface board (AP-42EA20) is not equipped on MZ-42PZ10 series model.
?
28
Function
1
MENU
checking
First ep
the MENU button.
Compsiton
Repeatedly press
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
ΔΕ
ΦΓ
0
OK
<Picture
MENU
menu>
Child lock
Off
Equalizer
Auto
Off
Balance
sleep
Language
ΔΕ
ΦΓ
OK
<Special
MENU
ConectiBasfu
TV/AV
TV/AV
ΔΕ
Flat
0
ΦΓ
OK
<Sound
menu>
MENU
TV/AV
Picture
menu>
PR
2
PR
VOL
VOL
3
Press the
?
Δ
The selected
/
Ε
button to select
menu
Press the Φ /
item.
Γ
item
changes
button to
a menu
item.
from white to
purple.
change
the
setting of
Sound
a
menu
?
Specialfunto
Press the TV/AV button to exit.
Tips
?
Only when Equalizer
be adjusted.
is set to User, Treble and Bass
are
displayed
and
can
Others
When the Interface board is installed, the special menu is displayed in AV/COMPONENT mode.
ΓThe Interface board (AP-42EA20) is not equipped on MZ-42PZ10 series model.
?
29
Picture
-
You
can
adjustment
adjust picture contrast, brightness, colour intensity, sharpness
or NTSC input only) to the levels you prefer.
and tint
(COMPO-
NENT, RGB-PC mode
1
Repeatedly press the MENU
picture menu.
button
to select the
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
0
MENU
ΔΕ
2
Press the Δ / Ε button to select the
desired picture item and then press the
Φ / Γ button to make
appropriate
adjustments.
ΦΓ
OK
MENU
' Contrast
TV/AV
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
ΔΕ
ΦΓ
0
OK
MENU
TV/AV
PR
VOL
VOL
PR
3
Press the OK button to store it for the
picture User and then press the TV/AV
button.
' Contrast
Ω Brightness
100
55
・ Colour
50
≥
60
Sharpness
? Tint
0
OK
TV/AV
?
preferred setting, press the PSM button until the desired pic(Dynamic, Standard, Mild or User) appears. The picture
Dynamic, Standard and Mild are programmed for good picture reproduction at the factory and cannot be changed.
To recall your
ture
30
Stored
First ep
Picture format
-
-
You can watch Plasma Display in various picture formats; 16:9 (Wide), 4:3 (Standard),
Zoom1orZoom2inAVmode.
Avoid having a fixed image remain on the screen for a long period of time. Typically a
frozen still picture from a VCR, 4:3 picture format or if a CH label is present; the fixed
image may remain visible on the screen.
ARC
(Aspect
Repeatedly press
picture format.
ARC
?
Ratio
Control)
the ARC button to select your desired
enjoy the cinema (the picture format of 16:9)
general Plasma Display programme through the
16:9 mode.
The screen 16:9 is viewed just like that but the
4:3 is magnified to the left and right so that the
16:9 is full.
?
?
?
ConectiBasfu
16:9
You can
or
?
Compsiton
4:3
This
picture
format is 4 to 3 of
general
Plasma
screen
screen
Display.
Zoom1
You can enjoy the cinema in a vast screen through the
Zoom mode. The screen 4:3 is magnified to the
upper/lower sides so that the screen 16:9 is full. The
bottom and top of the picture may be lost.
You can move the screen up/down with Δ / Ε button.
Picture
Zoom2
You can enjoy a larger magnified screen in this mode.
The screen Zoom 2 is viewed just like that but the
screen 16:9 is magnified more and more to the left and
right so that the screen Zoom 2 is full.
Sound
Zoom
Only when receiving over SVGA (800X600), you can
select Zoom.
You can move the screen up/down or left/right with
Δ/ΕorΦ/Γbutton.
Specialfunto
Tips
?
?
?
Others
When you switch the Monitor to standby or off, the picture format is reset to
the 16:9.
In COMPONENT mode only you can select 4:3.
Only when receiving RGB-PC signal (over 800 x 600) in RGB-PC mode,
you can select Zoom.
31
Sound
-
You
can
select your preferred sound
treble and bass.
adjustment
setting; Flat, Music,
Movie
or
Speech
and you
can
adjust balance,
1
Repeatedly press
the MENU button
to select the sound menu.
Flat
Equalizer
Balance
0
MENU
ΔΕ
2
Press the Δ / Ε button to select the
desired sound item and then press the
Φ / Γ button to make desired
adjust-
ΦΓ
OK
MENU
TV/AV
Flat
Equalizer
Balance
0
ments.
?
In
case
of
Equalizer User, you
can
adjust
ΔΕ
ΦΓ
OK
MENU
TV/AV
Treble and Bass.
PR
VOL
VOL
User
Equalizer
Balance
0
Treble
50
Bass
50
PR
ΔΕ
?
3
OK
MENU
TV/AV
preferred setting, press the SSM button until the desired sound
(Flat, Music, Movie, Speech or User) appears. The sound Flat, Music,
Movie and Speech are programmed for good sound reproduction at the
factory and cannot be changed.
To recall your
Press the TV/AV button to exit.
TV/AV
32
ΦΓ
also
First ep
Child lock
-
The Monitor can be set so that the remote control is needed to control it. This feature
used to prevent unauthorized viewing.
1
Repeatedly press the MENU
to select the special menu.
can
be
Compsiton
button
Child lock
Off
Auto
Off
sleep
Language
MENU
ΔΕ
2
Press the
Δ
/
Ε
button to select Child lock.
ΦΓ
OK
MENU
TV/AV
Child lock
Off
Auto
Off
sleep
Language
ConectiBasfu
PR
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
3
Press the
Φ
/
Γ
button to select On.
Child lock
On
Auto
Off
sleep
Language
VOL
VOL
ΔΕ
ΦΓ
OK
MENU
TV/AV
Sound
With the lock on, the display Child lock on appears on the screen if any
button on the Monitor is pressed while viewing the Plasma Display.
?
4
Picture
Press the TV/AV button to exit.
Specialfunto
TV/AV
Tips
Others
Child lock is displayed in AV/COMPONENT mode when the Interface board is
installed.
ΓThe Interface board (AP-42EA20) is not equipped on MZ-42PZ10 series model.
?
33
Auto
-
sleep
If you select Auto sleep On, the Monitor will automatically switch itself to
ten minutes after no input signal.
standby
mode
approximately
1
Repeatedly press the MENU
special menu.
button
to select the
Child lock
Off
Auto
Off
sleep
Language
MENU
ΔΕ
Press the
2
Δ
/
Ε
ΦΓ
OK
MENU
TV/AV
button to select Auto
sleep.
Child lock
Off
Auto
Off
sleep
Language
PR
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
Press the
Φ
/
Γ
button to select On.
3
Child lock
Off
Auto
On
sleep
Language
VOL
VOL
ΔΕ
ΦΓ
OK
MENU
TV/AV
Press the TV/AV button to exit.
4
TV/AV
Tips
Auto sleep is displayed in AV/COMPONENT mode when the Interface board is
installed.
ΓThe Interface board (AP-42EA20) is not equipped on MZ-42PZ10 series model.
?
34
Sleep
-
First ep
timer
You don't have to remember to switch the Monitor off before you go to sleep. The
automatically switches the Monitor to standby after the preset time elapses.
sleep
timer
Compsiton
Press the SLEEP button to set sleep time.
Each time you press this button setting time
is changed as below.
SLEEP
---
10
20
30
120
90
60
ConectiBasfu
240
180
---
Picture
?
To release sleep time setting, press the SLEEP
---.
button repeatedly to select
Sound
Specialfunto
Tips
To view the remaining sleep time, press the SLEEP button once.
When you switch the Monitor off, the Monitor releases the preset sleep time.
ΓThe Interface board (AP-42EA20) is not equipped on MZ-42PZ10 series model.
Others
?
?
35
check list
Troubleshooting
?
No
picture
&
?
No sound
?
Check whether the Monitor is turned
on.
Check the power cord.
Plug another product's power cord into the wall outlet where
the Monitor's power cord was plugged in.
Picture OK &
?
No sound
?
Press the VOLUME
Check to
see
?
doesn't work
No
or
or
picture
No
output from
of the
one
if the batteries
to
between the Monitor and
are
installed with the correct
p.26)
batteries.
?
Adjust picture
?
Keep
?
Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the
a
?
?
new
items in the
picture
p.26)
menu.
(Refer
to
p.30)
certain distance between the Monitor and the VCR.
gets dark.)
Check the kind of
Adjust
(Refer
to
Replace
input signal.
Balance in the sound
menu.
(Refer
to
p.32)
Speakers
?
Strange
sound
from the Monitor
The
ing
reason
strange sound
the Monitor
output
on or
faulty.
comes
from the Monitor when turn-
off is due to the
to the Monitor. This
the Monitor is
36
causing
object
obstruction.
?
screen
Poor stereo sound
see
polarities. (Refer
Poor colour
Poor
Check to
button.
if there is any
the remote control
The remote control
(Γ)
signals being input
strange noise does
or
not mean that
First ep
Note
Compsiton
ConectiBasfu
Picture
Sound
Specialfunto
Others
37
Note
38
Product
First ep
specifications
Compsiton
MODEL
Width
MZ-42PZ10/B/G/K/S
(inches)
25
Depth (inches)
3.2
Weight (pounds)
72.1
requirement
230V~ 50Hz
Resolution
Colour
This
product specifications
quality improvement.
ConectiBasfu
41.6
Height (inches)
Power
?
MT-42PZ10/B/G/K/S
110-240V~ 50/60Hz
852
x
480
Picture
(Dot)
16,770,000 (256 steps of each R, G and B)
above
can
be
changed
Sound
without notice for
Specialfunto
Others
39
P/NO
:
3828VA0293A b
(MP00MC,
067G TX,
373-026H)
Download PDF

advertising