LG | MT-60PZ10 | LG MT-60PZ10 Owner’s Manual

Please read this owner's manual
operating
carefully
before
the Monitor.
Retain it for future reference.
Record model number and serial number of the
Monitor.
See the label attached
and
quote this information
require
Model number
:
the back of the Monitor
to your dealer when you
service.
Serial number
P/NO
on
:
:
PLASMONITR
MT-60PZ10/B/G/K/S
MT-60PZ11/B/G/K/S
MZ-60PZ10/B/G/K/S
MZ-60PZ11/B/G/K/S
OWNER'S MANUAL
3828VA0276A d
(NP00KA)
INPUT
ON/OFF
SELECT
VOLUME
FCC NOTICE
?
MT-60PZ11/B/G/K/S / MZ-60PZ11/B/G/K/S
This
:
A Class A
digital
device
comply with the limits for a Class A digital device, pursuant
designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
equipment
has been tested and found to
to Part 15 of the FCC Rules. These limits
correct the interference at his
?
own
expense.
MT-60PZ10/B/G/K/S / MZ-60PZ10/B/G/K/S
This
equipment
are
:
A Class B
digital
device
has been tested and found to
to Part 15 of the FCC Rules. These limits
comply with the limits for a Class B digital device, pursuant
designed to provide reasonable protection against harmful
equipment generates, uses and can radiate radio frequency
are
interference in
a residential installation. This
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this
equipment does cause harmful interference to radio or television reception, which can
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
be determined
-
-
-
-
WARNING
This is Class A and Class B
interference in which
case
product.
the
user
In
a
domestic environment this
may be
required
to take
product may
adequate measures.
cause
radio
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
ON/OFF
NPUT
SELECT
VOLUME
Contents
First step
Instructions ....................................................4
Safety
Monitor Overview
Controls of the Monitor .............................................8
Controls of the remote control ................................12
Monitor Installation .................................................14
Equipment Connections and Setup
Watching VCR ........................................................16
Watching Cable TV.................................................18
Watching external AV source..................................19
Watching DVD ........................................................20
Connecting PC .......................................................21
Function checking in PC mode ..............................23
Adjusting in PC mode .............................................24
PIP function ............................................................27
Twin
picture mode ..................................................30
Using the remote control ........................................31
Basic Features Setup and Operation
Turning on the Monitor ...........................................32
Selecting the on screen language ..........................33
Function checking...................................................34
Sleep Timer
Setting Sleep
Timer
(Monitor
turn-off
time)
............35
Picture & Sound
Auto picture control ................................................36
Adjusting picture condition .....................................37
DRP (Digital Reality Picture) ..................................38
Selecting menu options ..........................................39
Adjusting Sound: Bass, Treble, Balance ................40
Auto sound control .................................................41
AVL (Auto volume leveler) ......................................42
Special Features
Using Still function ..................................................43
Adjusting OSD Transparency .................................44
Setting picture format .............................................45
Others
Troubleshooting check list ......................................46
Product specifications.............................................47
Safety
-
Instructions
It is recommended that this product only be used at an altitude of less than
6562 feet (2000m) to get the best quality picture and sound.
WARNING
Indorstali
NOTES
Do not place the Monitor in
direct sunlight or near heat
sources such as heat registers,
stove and so on.
This may
-
cause a
Disconnect from the mains and
all connections before
remove
moving.
fire.
WARNING
Do not
the Monitor in
such as a bathany place where it
use
damp place
room or
OutdorInsali
is
likely
to
get
wet.
Bend antenna cable between
inside and outside building to prevent rain from flowing in.
-
This may cause a fire or could
give an electric shock.
-
WARNING
NOTES
Earth wire should be connected.
-
-
Power
-
If the earth wire is not connected,
there is possible a danger of electric
shock caused by the current leakage.
If grounding methods are not possible, a separate circuit breaker should
be employed and installed by a qualified electrician.
Do not connect ground to telephone
wires, lightning rods or gas pipe.
Short-circuit
breaker
4
This may cause water damaged inside
the Monitor and could give an electric
shock.
Never touch the power
with a wet hand
-
This may
cause an
plug
electric shock.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
below.
as
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
or
and
even
damage
death.
of the
product.
Take
care
of
danger that may happen
under
specific condition.
NOTES
Do not place the Monitor in a builtin installation such as a bookcase
or rack.
-
Ventilation
When installing the Monitor on a table, be
careful not to place the edge of its stand.
-
This may
cause
child
the Monitor.
injury
required.
to
a
the Monitor to fall, causing serious
adult, and serious damage to
or
NOTES
Do not place an outside antenna in
the vicinity of overhead power lines
other electric light or power circuits.
-
This may
cause an
electric shock.
or
There should be enough distance between an
outside antenna and power lines to keep the former from touching the latter even when the
antenna falls.
-
This may cause
an electric shock.
NOTES
Do not pull the cord but the
when unplugging.
plug
-
This may
cause a
fire.
Ensure the power cord
doesn't trail across any hot
objects like a heater.
-
This may cause
tric shock.
a
fire
or an
elec-
Do not plug when the power
cord or the plug is damaged
or the connecting part of the
power outlet is loose.
-
This may cause a fire
an electric shock.
or
FirstepMonvwCcBaSlmPu&df
Others
5
Safety
Instructions
WARNING
WARNING
Do not placing anything containing liquid
on
-
Using
top of the Monitor.
This may cause a fire
could give an electric
shock.
or
Do not insert any
into the
exhaust vent.
Do not
object
-
place heavy
objects
on
the
Monitor.
This may cause a fire
could give an electric
shock.
or
-
This may
injury
to
a
cause
child
serious
adult.
or
WARNING
Do not use water the Monitor
while cleaning.
-
Cleanig
This may cause damaged the
Monitor or could give an electric
shock.
In case of smoke or strange
smell from the Monitor, switch it
off ,unplug it from the wall outlet
and contact your dealer or service center.
-
This may cause a fire
an electric shock.
or
could
give
WARNING
Do not attempt to service
the Monitor yourself.
Contact your dealer or service center.
Others
6
-
This may cause damaged the
Monitor or could give an electric
shock.
During
unplug
a
lightning thunder,
the Monitor from the
wall outlet and don't touch an
antenna cable.
-
This may cause damaged the
Monitor or could give an
electric shock.
WARNING in U.K.
*
This set is
only
with a BS 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse
always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is
not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
supplied
NOTES
NOTES
Dispose of used batteries
carefully to protect a child
from eating them.
-
In
case
to
see a
When moving the Monitor
assembled with speakers do
not carry holding the speak-
Avoid having a fixed image
remain on the screen for a
long period of time. Typically
a frozen still picture from a
VCR, 4:3 picture format or if
a CH label is present; the
fixed image may remain
visible on the screen.
ers.
that it eats them, take it
doctor immediately.
-
This may
cause
the Monitor to
fall, causing serious injury
child or adult, and
to
a
serious
damage
to the
Monitor.
NOTES
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners.
-
This may cause damaged the Monitor
an electric shock.
or
could
Contact the service center once a year to
clean the internal part of the Monitor.
-
Accumulated dust
can cause
mechanical failure.
give
NOTES
The distance between eyes
and the screen should be
about5~7timesaslongas
diagonal length of the
screen.
-
If not, eyes will strain.
Unplug the Monitor from the
wall outlet when it is left
unattended and unused for
long periods of time.
-
Accumulated dust may cause
fire or an electric shock from
deterioration or
electric leakag
a
Only
use
teries.
-
the
specified
bat-
This make cause damaged the
Monitor or could give an electric
shock.
FirstepMonvwCcBaSlmPu&df
Others
7
Controls of the Monitor
<Front Panel Controls>
ON/OFF
INPUT
ON/OFF
SELECT
VOLUME
Main power button
Power standby indicator
Illuminates red in standby
mode Illuminates green
when the Monitor is turned
INPUT
SELECT
VOLUME
on
INPUT SELECT button
Sub power button
VOLUME (Φ,Γ) buttons
8
Remote control
sensor
<Back Panel>
R AUDIO
L (MONO) VIDEO
AV INPUT
Y
RL
AUDIO
(MONO) VIDEO
AV INPUT
PB
Y
PB
PR
COMPONENT
(480i/480p)
(DVD INPUT)
PR
COMPONENT (480i/480p)
(DVD INPUT)
R
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
(+)
AUDIO L
AUDIO INPUT
S-VIDEO
R
()
()
L
EXTERNAL SPEAKER
(+)
(8Ω)
AC INPUT
(+) R ()
R AUDIO L
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
AUDIO INPUT
S-VIDEO
() L (+)
EXTERNAL SPEAKER
(8Ω)
AC INPUT
AV INPUT /
EXTERNAL SPEAKER
COMPONENT
(8 ohm output)
(480i/480p)
(DVD INPUT) jacks
RGB-PC INPUT (VGA/SVGA/XGA/SXGA)
AUDIO INPUT jacks
FirstepMonvwCcBaSlmPu&df
Others
9
Accessories
POWER
SLEEP
INPUT SELECT
PSM
SSM
ARC
STILL
PIP
TWINPICTURE
PIPINPUT
POSITION
MENU
VOL
POWER
REW
MUTE
OK
STOP
PLAY
VOL
P/STLL
FF
REC
D-sub 15
pin
cable
Power cord
1.5V
LG TV
1.5V
mark
AS
Owner's Manual
Optional
-
-
Extras
AP-60WA20M/B
10
Alkaline batteries
Optional extras can be changed or modified
optional extras can be added.
Contract your dealer for buying these items.
(Tilt
wall
Remote control handset
mounting bracket)
for
quality improvement
without any notification
AP-60WA10/B
(Wall mounting bracket)
new
Optional
-
-
Extras
Optional extras can be changed or modified
optional extras can be added.
Contract your dealer for buying these items.
for
quality improvement
without any notification
AP-60CA10/B
AP-60FA10/B/G/K/S
(Ceiling mounting bracket)
(Floor type stand)
AP-60DA10/B/G/K/S
AP-60SA10/B/G/K/S
(Desktop stand)
(Speakers)
AP-60SA10D/B/G/K/S
AP-60SA10F/B/G/K/S
(Speaker stand)
(Floor type speaker stand)
new
FirstepMonvwCcBaSlmPu&df
Others
Video cables
Audio cables
11
Controls of the remote control
-
When
using
the remote control aim it at the remote control
sensor
of the Monitor.
POWER
POWER
SLEEP
SLEEP (Refer to
p.35)
PSM (Refer to
p.36)
ARC (Refer to
p.45)
PIP
(Refer
to
INPUT SELECT
PSM
SSM
ARC
STILL
PIP
TWIN PICTURE
p.27)
PIP INPUT
PIP INPUT
(Refer
to
POSITION
p.28, 30)
MENU
MUTE
MENU
OK
OK
VOL
POWER
STOP
P/STILL
REW
PLAY
FF
VOL
VOLUME (Φ, Γ)
VCR BUTTONS
controls
a
LG video cassette
recorder.
12
REC
INPUT SELECT
INPUT SELECT button
on
the
remote control
SSM (Refer to
p.41)
Each press of this button
STILL (Refer to
p.43)
TWIN PICTURE
(Refer
POSITION (Refer to
the mode
to
p.30)
as
changes
shown below.
Video
Component
p.28)
MUTE
switches the sound
on or
off.
RGB
Δ/Ε
selects
a menu
item.
FirstepMonvwCcBaSlmPu&df
Others
13
Monitor Installation
-
The Monitor
can
desktop type,
be installed in various ways such
as
wall
mounting type,
etc..
Wall Mount Installation
?
The monitor
can
be installed
(For further information,
Guide'.)
on
refer to
the wall
'(Tilt)
the picture above.
mounting bracket Installation
as
wall
and
Setup
Tips
?
Install this monitor
only
in
a
location where
adequate
ventilation is available.
a.
(Wall
4inch
mount minimum allowable
clearances for
1.18inch
adequate
ventilation)
4inch
4inch
4inch
14
Desktop pedestal installation
INPUT
SELECT
ON/OFF
?
The Monitor
(For
can
be installed
on a
further information, refer to
desk
as
'Desktop
VOLUME
shown above.
stand Installation and
Setup Guide'.)
b.
(Pedestal
mount minimum
4inch
1.18inch
allowable clearances for
adequate ventilation)
4inch
4inch
FirstepMonvwCcBaSlmPu&df
Others
2.36inch
15
Watching VCR
-
When
connecting the Plasma Monitor with external equipments, match
connecting ports (Video yellow, Audio(L) white, Audio(R) -red).
-
-
-
the colours of
-
If you have a mono VCR, connect the audio cable from the VCR to the
input of the Plasma Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture
to connecting a regular VCR to the Video input.
AUDIO(L/MONO)
quality
is
improved;
compared
-
-
picture format or still word such as watching VCR
long time, that fixed image may remain visible.
or
Avoid having a fixed image remain
frozen still picture from a VCR, 4:3
the fixed image may remain visible
of time. Typically
CH label is present;
If 4:3
screen
for
a
picture
format
or
if
on
screen.
on
the
the
S-VIDEO
CH label is
long period
a
on
the
screen
for
a
a
OUT
(R)
AUDIO
(L)
VIDEO
IN
<Back
panel
of VCR>
Tips
?
16
To avoid picture noise
and monitor.
(interference),
leave
an
adequate
distance between the VCR
R AUDIO
L
(MONO)
VIDEO
Y
PB
PR
COMPONENT
AV INPUT
RAUDIO L (MONO) VIDEO
AV INPUT
Y
PB
PR
COMPONENT (480i/480p)
(DVD INPUT)
(480/480p/720p/1080i)
(DVD/DTV INPUT)
R
(+)
AUDIO L
R
)
()
(+)
L
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
AUDIO NPUT
S-VIDEO
EXTERNALSPEA
R
(8Ω)
AC INPUT
(+)
R AUDIO L
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
<Back
panel
AUDIO INPUT
VIDEO
R
()
()
EXTERNAL
L
(+)
SPEAKER(8Ω)
AC INPUT
of the Monitor>
To watch VCR
1
2
Press INPUT SELECT button
on
the
INPUT SELECT
remote control and select Video.
Insert a video tape into the VCR and press
the PLAY button on the VCR. See VCR
owner's manual.
FirstepMonvwCcBaSlmPu&df
Others
17
Watching Cable
-
After
you
to a cable TV service from
watch cable TV programming.
subscribing
can
R AUDO
L
(MONO)VIDEO
AV INPUT
Y
R AUDIO L (MONO) VIDEO
PB
PR
PB
P R
local
a
R
(+)
R AUDIO L
RGB-PC INPUT
AUDIOINPUT
(VGA/SVGA/XGA/SXGA)
S-VIDEO
()
EXTERNAL SPEA
provider
and
(VGA SVGA/XGA/SXGA)
(DVD INPUT)
R
(8Ω)
(
AUDIO
a
converter,
AC INPUT
(+)
AUDIO INPUT
<Back
installing
(+)
L
R AUDIO L
RGB-PC INPUT
COMPONENT (480i/480p)
AV INPUT
Y
COMPONENT(480/480p)
(DVDINPUT)
TV
S-VIDEO
panel
R
()
()
EXTERNAL
L
(+)
SPEAKER(8Ω)
of the Monitor>
<Cable box>
VO
TV
VCR
RF
Cable
To watch cable TV
Press INPUT SELECT button
1
on
the
INPUT SELECT
remote control and select Video.
Tune to cable service
2
provided
channels
using
the cable box.
Tips
?
18
For further information regarding cable TV service, contact your local
cable TV service provider(s).
AC INPUT
external AV
Watching
-
When
connecting
the Plasma Monitor with external
match the colours of
L
(MONO)VIDEO
AV INPUT
Y
PB
P R
COMPONENT(480/480p)
(DVD INPUT)
Y
PB
PR
panel
AUDO
R
(+)
L
AUDIOINPUT
S-VIDEO
()
EXTERNAL SPEAK
L
(+)
R(8Ω)
AC INPUT
(+)
AUDIO INPUT
S-VIDEO
(VGA/SVGA/XGA/SXGA)
(DVD INPUT)
<Back
R
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
R AUDIO L
RGB-PC INPUT
COMPONENT (480i/480p)
AV INPUT
equipments,
connecting ports.
R AUDIO
R AUDIO L (MONO) VIDEO
source
R
()
()
EXTERNAL
L
(+)
SPEAKER(8Ω)
AC INPUT
of the Monitor>
Camcorder
R
AUDIO
L
VIDEO
Video game set
To watch external AV
1
2
Press INPUT SELECT button
on
source
the
INPUT SELECT
remote control of the monitor to select
Video.
Operate
the
corresponding
external
FirstepMonvwCcBaSlmPu&df
Others
equipment.
19
DVD
Watching
How to connect
?
Connect DVD video inputs to Y, PB, PR of COMPONENT
audio inputs to Audio sockets of AV INPUT.
R AUDO
L
(MONO)
AV NPUT
R AUDIO L (MONO) VIDEO
AV INPUT
Y
PB
VIDEO
Y
PB
PR
COMPONENT (480i/480p)
(DVD INPUT)
P R
R
COMPONENT(480/480pi)
(DVDINPUT)
RGB-PC INPUT
AUDO
R
(+)
L
AUDIOINPUT
S-VIDEO
(VGA/SVGAXGA/SXGA)
EXT
()
L
RNAL SPEAKER
(8Ω)
AC NPUT
AUDIO INPUT
S-VIDEO
(VGA/SVGA/XGA/SXGA)
(R)
<
AUDIO
(L)
Back
B
panel
of
R
(+)
R AUDIO L
RGB-PC INPU
a
and
(+)
<
How to
(480i/480p) (DVD INPUT)
DVD
use
Back
()
()
EXTERNAL
panel
L
(+)
SPEAKER(8Ω)
AC INPUT
of the Monitor>
R
player>
?
Component Input ports
can get better picture quality if you
connect DVD player with component input
You
ports
?
?
Press INPUT SELECT button on the remote control of the
monitor to select Component.
Try this after turning on the DVD player.
as
below.
Component ports
Video
output ports
of DVD
20
of the
Monitor
player
YPBPR
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
PC
Connecting
-
You
can
vivid
enjoy
picture
and sound with
connecting
a
PC with the Monitor.
How to connect
?
?
?
?
?
If the resolution of PC is over UXGA, there will be no picture on the Monitor.
Connect the signal cable from the monitor output port of the PC to the RGB-PC
INPUT(VGA/SVGA/XGA/SXGA) port of the Monitor.
Connect the audio cable from the PC to the Audio ports of the Monitor. (Audio cables not included
with the Monitor)
In case of using a sound card adjust PC sound properly.
To setup this monitor in your PC windows environment, select Normal, Standard or Default monitor. This monitor does not support Plug and Play functionality.
R AUDIO L (MONO)VDEO
Y
Y
R AUDIO L (MONO) VIDEO
<
Back
R
PR
RGB-PC INPUT
PC
UT
/S
AUDIO INPUT
S-VIDEO
(VGA/SVGA/XGA/SXGA)
R
RGB
(VGA/SVGA
(+)
R AUDIO L
(480i/480p)
(DVD INPUT)
PR
(DVD INPUT)
panel
How to
PB
COMPONENT (480i/480p)
AV INPUT
PB
COMPONENT
AV INPUT
EXT
()
RNALSPEA
L
(+)
R
(8Ω)
AC INPUT
(+)
AUDIO
AUD O INPUT
GA)
S-VIDEO
R
()
()
EXTERNAL
L
(+)
SPEAKER(8Ω)
AC INPUT
of the Monitor>
use
?
INPUT SELECT
?
<On the remote control>
Press POWER button on the PC and press ON/OFF button
the Monitor. After this press
button on the Monitor or
press POWER button on the remote control of the monitor.
Press INPUT SELECT button on the remote control to
select RGB.
Set the resolution of PC under SXGA (1280x1024, 75Hz).
on
?
(Refer
to page
22.)
Tips
?
?
To avoid burning an image on the Monitor screen, don't have a still picture on the screen
for a long period time.
If the resolution of PC is over SVGA, connect PC to the RGB-PC(VGA/SVGA/XGA/SXGA)
port of the Monitor after changing the resolution of PC.
21
FirstepMonvwCcBaSlmPu&df
Others
Displayable
Monitor
Resolution
640x350
720x400
640x480
800x600
832x624
1024x768
1152x864
1152x870
1280x960
1280x1024
22
Specification
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
31.468
70.09
37.861
85.08
31.469
70.08
37.927
85.03
31.469
59.94
35.000
66.66
37.861
72.80
37.500
75.00
43.269
85.00
45.913
90.03
53.011
100.04
64.062
120.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
53.674
85.06
56.000
90.00
64.016
100.00
49.725
74.55
48.363
60.00
56.476
70.06
60.023
75.02
68.677
84.99
54.348
60.05
63.995
70.01
67.500
75.00
77.487
85.05
68.681
75.06
60.000
60.00
75.000
75.00
63.981
60.02
79.976
75.02
Function
-
Select RGB
input
checking
in PC mode
source.
MENU
1
2
Press the MENU button.
Press the Δ / Ε button.
?
Each time you press this button you
PSM
Γ
85Γ
Brightness
50Γ
Colour
50Γ
Tint
0Γ
50Γ
Sharpness
OK
ΔΕ Γ
MENU
<Picture
SSM
Γ
Treble
50Γ
Bass
50Γ
Balance
0Γ
OK
Γ
MENU
<Sound
?
VOL
VOL
3
menu>
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
OK
MENU
<Special
?
menu>
Γ
AVL
ΔΕ Γ
below.
Γ
DRP
Contrast
ΔΕ
can see menus as
menu>
The PIP works in VGA, SVGA, XGA, 60Hz.
The TWIN PICTURE works in VGA, 60Hz.
Press the Γ button and then press the Δ / Ε
Others
or
Φ / Γ button to select a function you want to use.
?
FirstepMonvwCcBaSlmPu&df
Press the OK button to exit.
23
Adjusting
Auto
-
-
-
in PC mode
configure
Select RGB
input source
Automatically adjusts picture position and eliminates any image shaking.
When watching PIP/TWIN PICTURE, Screen option is not available in
menu.
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
VOL
Press the Δ / Ε button to select Screen and
then press the Γ button.
1
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
ΓToSet
VOL
Press the Δ / Ε button to select
Auto-configure and then press
the Γ button.
2
Auto-configure
Γ
ΓToSet
Γ
Γ
Phase
Γ
Reset
Γ
VOL
?
?
If
3
When Auto.configure has finished, "OK" will be shown on screen.
If the position of the image is incorrect, try Auto adjustment again.
picture
needs to be
,and Phase.
adjusted
more
after auto
adjustment, adjust
Tips
?
24
If the
image
is still not correct, your Monitor is
functioning properly
but needs further
adjustment.
Adjusting
-
and
Only adjust
horizontal / vertical
in
position
component 480p/720p1080i.
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
VOL
Press the Δ / Ε button to select Screen and
then press the Γ button.
1
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
ΓToSet
VOL
Press the Δ / Ε button to select
then press the Γ button.
2
or
and
Auto-configure
Γ
Γ
0
Γ
VOL
?
?
3
Select
Select
Phase
Γ
Reset
Γ
for vertical position adjustment.
for horizontal position adjustment.
Press the Φ / Γ button to adjust until you get desired horizontal
vertical position and then press the OK button.
?
or
The adjustment range of
is -50
+50.
The adjustment range of
is -100
+100.
Based on the input mode, the adjustment range of
or
may change.
Based on the input signal, the position of the picture may not change even
though you have adjusted the horizontal or vertical position with this function.
~
~
?
?
VOL
VOL
FirstepMonvwCcBaSlmPu&df
Others
OK
25
in PC mode
Adjusting
Adjusting phase
-
If the
picture isn't clear after auto adjustment and especially that characters are still
then adjust the picture phase manually.
When watching PIP/TWIN PICTURE, Screen option is not available in Special menu.
trem-
bling,
-
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the
(
Γ
MENU
1
button.
)
VOL
Press the Δ / Ε button to select Screen and
then press the Γ button.
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
ΓToSet
VOL
2
Press the Δ / Ε button to select Phase and
then press the Γ button.
Auto-configure
Γ
Γ
Γ
VOL
Press the Φ / Γ button to
3
adjust phase
Phase
Γ
Reset
Γ
30
and then press the OK but-
ton.
?
The
adjustment range
of Phase is 0
63.
~
OK
VOL
VOL
Initializing
?
26
To initialize the adjusted value, select Reset with the Δ / Ε button and then
press the Γ button.
PIP function
-
-
-
-
-
-
-
Select RGB
pressing PIP.
only
following resolution;
640x480, 800x600, 1024x768 (only in Vertical frequency 60 Hz)
When you select RGB for main picture in PIP/Twin picture, you can watch video, cable TV or DVD
for sub picture.
Color of main picture may be different from sub picture's in PIP/Twin picture mode.
If input source for main picture is changed while in PIP/Twin picture mode, sub picture will disappear.
When watching PIP/Twin picture, Screen option is not available in
menu.
With PIP active, not all picture formats can be used for the main/sub picture.
input
source
This function works
before
in the
Watching
PIP
the PIP
(Picture
in
Picture)
Press the PIP button.
?
Each time you press PIP
PIP size as below.
PIP
or Φ
/ Γ button, you
PIP [L]
[S]
PIP
Φ
PIP[S]
can
change
the
Off
Γ
<Small PIP>
PIP
Φ
PIP[L]
<Large
PIPΦOff
Γ
PIP>
FirstepMonvwCcBaSlmPu&df
Others
Γ
<Off>
27
PIP function
Selecting
PIP INPUT
the
Press the PIP INPUT button in PIP mode.
?
Each time you press PIP INPUT button, you
Video and Component.
Component
PIP
Moving
POSITION
Input
Φ
source
Video
the Sub
only
toggle
between
works in 480i mode.
Γ
picture
Press the POSITION button in PIP mode.
?
28
input signal
Each press of the POSITION button will change the
the sub picture on the screen as shown below.
position
of
Selecting
-
-
-
This function works
PIP sound
only
in the
options
following resolutions;
640x480, 800x600, 1024x768 (only in Vertical frequency 60 Hz)
To use this function, connect PC video port to RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
socket and connect PC audio port to AUDIO INPUT.
Sound Select is always selected Sound[M] regardless of
prior
sound choice.
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the
(
Γ
MENU
1
)
button.
VOL
Press the Δ / Ε button to select PIP/DW and
then press the Γ button.
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
ΓToSet
VOL
2
Press the Δ / Ε button to select Sound
Select and then press the Γ button.
VOL
3
Press the Δ / Ε button to select Sound [M]
Sound [S] and then press the OK button.
DW
Γ
PIP
Γ
Input
Γ
Sound Select
Γ
Sound
[M]
Position
Γ
Sound
[S]
DW
Γ
PIP
Γ
or
OK
Input
Γ
Sound Select
Γ
Sound
[M]
Position
Γ
Sound
[S]
FirstepMonvwCcBaSlmPu&df
Others
29
Twin
-
-
-
-
Select RGB
input
source.
This function works
DTV
With TWIN PICTURE
in the
following resolutions;
(only in Vertical frequency 60 Hz)
active, not all picture formats can be used
only
480i/720p/1080i,
TWIN PICTURE
mode
picture
640x480
for the main/sub
picture.
Press the TWIN PICTURE button.
?
Each time you press TWIN PICTURE
select On or Off.
Main
Sub
?
DW
ΦOnΓ
can
picture
picture
To avoid
image
picture
<ON>
/ Γ button, you
or Φ
a fixed
the screen, sub
moves every 2
showing
on
hours.
:Center
Upside
Downside
?
DW
Sub picture of TWIN PICTURE is always located in
center position at first and
movement of sub picture
operate.
ΦOffΓ
?
<OFF>
It's not out of order even
though a horizontal noise
occur in blanking part of
sub
Selecting
PIP INPUT
a source
picture.
for the Twin
picture
Press the PIP INPUT button in TWIN PICTURE mode.
?
Each time you press PIP INPUT button, you
Video and Component.
Component
PIP
30
Center
Input
source
Φ
Video
only
Γ
works with 480i
toggle
between
signal input.
Using
Inserting
the remote control
batteries
?
the
Open
battery compartment
cover on
side and insert the batteries with correct
?
Apply
two 1.5V alkaline batteries of AAA
Don't mix the used batteries with
?
Notes for
Make
sure
objects
using
these
are no
between the
new
Install the batteries with the correct
the back
polarity.
type.
batteries.
polarities.
the remote control
Don't
place
near a
the remote control
heater
remote control and its
Strong impact
sensor.
trol may
damp place.
or
cause
on
the remote
operation
con-
failure.
Signal
from the remote control
may be disturbed by sun light or
other strong light. In this case,
turn the set to other direction.
FirstepMonvwCcBaSlmPu&df
Others
31
Turning
-
When
using
Turning
on
control,
aim it at its
the Monitor
just
Connect power cord
1
sensor on
the Monitor
the Monitor.
after installation
correctly.
Press the ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
or INPUT SELECT button on the
Monitor or press the POWER or INPUT SELECT button on the remote control
and then the Monitor will be switched on.
2
Turning
1
the remote
on
on
the Monitor
(power
cord is still
If the Monitor is turned off with the
connected)
button
on
the Monitor
Press the
or INPUT SELECT button on the Monitor or press the POWER
INPUT SELECT button on the remote control and then the Monitor will be
switched on.
or
2
3
If the Monitor is turned off with the ON/OFF button
?
Press the ON/OFF button
the Monitor to turn
on
on
the Monitor
the Monitor.
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
?
Press the ON/OFF button on the Monitor and then press the
or INPUT
SELECT button on the Monitor or press the POWER or INPUT SELECT button on the remote control and then the Monitor will be switched on.
Tips
Adjusting
Volume(Γ)
?
sound.
32
on
volume level
button increases the sound and
volume(Φ)
button decreases the
Selecting
the
on screen
language
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Press the Δ / Ε button to select
Language and then press the Γ button.
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
VOL
2
3
Press the Δ / Ε button to select the desired
language.
Press the OK button.
OK
FirstepMonvwCcBaSlmPu&df
Others
33
Function
-
Select VIDEO
MENU
input
checking
source.
1
Press the MENU button.
2
Press the Δ / Ε button.
?
Each time you press this button you
shown below.
PSM
Γ
DRP
Γ
Contrast
100
50Γ
Colour
50Γ
Tint
0Γ
50Γ
Sharpness
OK
ΔΕ Γ
MENU
<Picture
SSM
Γ
Treble
50Γ
Bass
50Γ
Balance
0Γ
OK
Γ
MENU
<Sound
Language
Γ
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
OK
MENU
<Special
3
menu>
PresstheΓbuttonandthenpresstheΔ/ΕorΦ/
Γ button to select a function you want to use.
?
34
menu>
ARC
ΔΕ Γ
VOL
menu>
Γ
AVL
VOL
Γ
Brightness
ΔΕ
can see menus
Press the OK button to exit.
Setting sleep time
<
Sleep Timer turns the
SLEEP
Monitor off after
a
preset time.
>
Press the SLEEP button to set sleep time.
Each time you press SLEEP button, the next
preset setting time is changed as shown below.
Φ---Γ
Φ10Γ
Φ20Γ
Φ30Γ
Φ120Γ
Φ90Γ
Φ60Γ
Φ240Γ
Φ180Γ
Φ---Γ
?
To release sleep time setting, press the SLEEP or
Φ / Γ button repeatedly to select Φ
Γ.
1' is displayed, one minute before the Monitor
is due to switch off.
---
'
?
Tips
?
?
?
When the sleep time you want is displayed on the screen, don't press the
SLEEP button. After 20 seconds, the screen display disappears and sleep
time is set.
To check remaining sleep time after setting, press the SLEEP button just once.
If you turn the Monitor off after setting the sleep timer, the setting is erased.
The sleep timer will then have to be set again.
FirstepMonvwCcBaSlmPu&df
Others
35
Auto
<
-
picture
Use PSM to set the Monitor for the best
This function is not available in
PSM
1
2
picture appearance
RGB, PIP/TWIN PICTURE.
PSM
(Picture Status Memory)
Press the PSM button.
Press the PSM or Φ / Γ button to select your
desired picture condition.
PSM
?
Φ
?
?
Dynamic
Γ
Each press of Φ / Γ button
shown below.
Dynamic
changes
Mild
the
screen
display
as
User
You can also select Dynamic, Mild or User in the
Picture menu.
The picture Dynamic, Mild and User are programmed for
good picture reproduction at the factory and cannot be
changed.
36
control
>
Adjusting picture
-
PIP and Twin
picture
inset
settings
are
not
condition
adjustable.
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Use the Δ / Ε button to select
Contrast and then press the Γ button.
(to adjust
contrast
setting)
PSM
Γ
DRP
Contrast
Γ
100
Γ
Brightness
50Γ
Colour
50Γ
Tint
Sharpness
0Γ
50Γ
VOL
?
2
Adjust Brightness, Colour, Tint
Sharpness in the same way.
and
Use the Φ / Γ button to make appropriate adjustments and then press the
OK button.
?
Press the Δ / Ε button to select other items.
PSM
DRP
VOL
Γ
70Γ
Brightness
50Γ
Colour
Tint
Sharpness
VOL
Γ
Contrast
0Γ
0Γ
50Γ
OK
FirstepMonvwCcBaSlmPu&df
Others
OK
37
DRP
<
Picture)
(Digital Reality
Soft
DRP allows you to select Clear
-
or
for your
picture appearance
This function works in video, component 480i mode.
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Press the Δ / Ε button to select DRP
and then press the Γ button.
PSM
2
Press the Δ / Ε button to select
Dynamic or Mild.
38
OK
Dynamic
Γ
Mild
Colour
50Γ
Sharpness
0Γ
50Γ
APC
Γ
DRP
Contrast
100
Γ
Dynamic
Γ
Mild
Brightness
50Γ
Colour
50Γ
Sharpness
3
Γ
50Γ
Tint
Press the OK button.
100
Brightness
Tint
VOL
Γ
DRP
Contrast
0Γ
50Γ
>
Selecting
-
Use this
option
when
viewing
menu
the video
options
input.
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Use the Δ / Ε button to select Screen
and then press the Γ button.
LANGUAGE
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
TV
VCR
VOL
2
UsetheΔ/ΕbuttontoselectTVor
VCR.
?
?
Select the VCR option if watching
Select the TV option for other
a
VCR.
LANGUAGE
Γ
ARC
Γ
Screen
Γ
TV
Transparency
Γ
VCR
PIP/DW
Γ
equipment.(Except VCR)
?
Each time you press the Δ / Ε button you
between TV and VCR.
toggle
VOL
3
Press the OK button.
FirstepMonvwCcBaSlmPu&df
Others
OK
39
Adjusting
sound
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Use the Δ / Ε button to select Treble
and then press the Γ button.
(if adjusting treble)
SSM
Γ
AVL
Γ
Treble
50
Bass
50Γ
Balance
Γ
0Γ
VOL
?
2
Adjust
same
way.
Use the Φ / Γ button to make appropriate adjustment and then press the
OK button.
?
Press the Δ / Ε button to select other
VOL
40
Bass and Balance in the
VOL
OK
options.
SSM
AVL
Γ
Γ
Treble
70Γ
Bass
50Γ
Balance
0Γ
Auto sound control
SSM
?
SSM
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound
option based on the program content.
1
Press the SSM button.
2
Press the SSM
desired sound.
SSM
?
or Φ
ΦUserΓ
Each press of SSM
play as below.
or Φ
Flat
?
/ Γ button
changes
the
screen
dis-
Movie
Speech
User
?
/ Γ button to select your
Music
You can also select Flat, Speech, Movie, Music or User
in the Sound menu.
The sound Flat, Speech, Movie and Music are programmed for good sound reproduction at the factory and
cannot be changed.
FirstepMonvwCcBaSlmPu&df
Others
41
AVL
<
(Auto Volume Leveler)
This feature maintains
an
equal
volume
level;
even
if you
change channels
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Press the Δ / Ε button to select AVL
and then press the Γ button.
SSM
AVL
Γ
Γ
On
Treble
50Γ
Off
Bass
50Γ
Balance
0Γ
VOL
2
PresstheΔ/ΕbuttontoselectOnor
Off.
SSM
AVL
Γ
On
50Γ
Off
Bass
50Γ
Balance
3
42
Press the OK button.
OK
Γ
Treble
0Γ
>
Using Still
-
This feature isn't available for RGB
1
STILL
input
function
source.
Press the STILL button.
?
?
You can still the current picture.
The sub picture is stilled in PIP or Twin
picture
mode.
<Moving image>
<Still
2
To return to normal
image>
viewing, press
the STILL button
again.
Tips
?
FirstepMonvwCcBaSlmPu&df
Others
If still picture is on the screen for more than 5 minutes, the image becomes
dark.
If another function is activated, normal brightness of the screen is restored.
43
Adjusting OSD Transparency
READY
Press the MENU button and then press the Δ / Ε button to
select
menu.
Press the Γ button.
MENU
1
VOL
Press the Δ / Ε button to select
Transparency and then press the Γ
button.
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
5
VOL
2
Press the Φ / Γ button to
transparency.
?
The adjustment range of
0~5.
VOL
3
VOL
Press the OK button.
OK
44
adjust OSD
Transparency is
Language
Γ
ARC
Γ
Screen
Γ
Transparency
Γ
PIP/DW
Γ
3
Setting picture format
-
You
are
-
If 4:3 is
-
Don't
ARC
available to 16:9
on
the
display
screen
4:3
or
for
a
4:3 in RGB.
long time,
format
picture
or
that fixed
image may
TWIN PICTURE
remain visible.
on screen
Press the ARC button to select
format.
?
above 10 hours
a
desired
Each time you press ARC or Φ / Γ button, you
select 16:9, 4:3 or Zoom alternatively.
continuously.
picture
can
ARCΦ16:9Γ
<16:9>
ARCΦ4:3Γ
<4:3>
ARCΦZoomΓ
<Zoom>
?
You
can
also select 16:9, 4:3
or
Zoom in the
Special
FirstepMonvwCcBaSlmPu&df
Others
menu.
45
check list
Troubleshooting
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
on.
No sound
?
?
Press the VOLUME
?
Sound muted? Press MUTE button.
Picture OK &
No sound
?
The remote control
?
doesn't work
?
or
or
Poor color
Poor
picture
Check to
Install
output from one
of the speakers
Strange
sound
from the Monitor
46
see
new
button.
if the batteries
to
are
installed with the correct
p.31)
batteries.
(Refer
to
Select Colour in the Picture
(Γ) button. (Refer to p.37)
p.31)
menu
and press the VOLUME
certain distance between the Monitor and the VCR.
?
Keep
?
Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the
a
screen
No
(Γ)
Check to see if there is any object between the Plasma
Display and the remote control causing obstruction.
polarities. (Refer
?
No
Plug another product's power cord into the wall outlet where
the Monitor's power cord was plugged in.
?
Adjust
?
Typical
faulty.
gets dark.)
Balance in the Sound
menu.
sound due to normal Monitor
(Refer
to
operation,
p.40)
Monitor is not
Product
specifications
MT/MZ-60PZ10/B/G/K/S
MT/MZ-60PZ11/B/G/K/S
MODEL
(inches
/
mm)
57.3 / 1455
Height (inches
/
mm)
34.8 / 883
Depth (inches
/
mm)
3.9/99
Width
Weight (pounds
Power
/
154.3 / 70
kg)
requirement
AC110-240V
1280
Resolution
Color
specifications
improvement.
(Dot)
0~40°C
under 80%
Humidity
The
720
16,770,000 (256 steps of each R, G and B)
Temperature
?
x
50/60Hz
~
shown above may be
changed
without notice for
quality
FirstepMonvwCcBaSlmPu&df
Others
47
Download PDF

advertising