advertisement
▼
Scroll to page 2
of 28
LCD Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this inforrequire service. mation to your dealer when you Model number : Serial number : P/NO : 3828VA0392A (ML024A, 082R/U TX) a Contents Installation 3 Location and function of controls Remote control handset Battery installation Side panel 4 Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function / Auto Demonstration On screen language selection (option) 7 On 8 screen menus Menu selection TV stations Auto programme tuning Manual programme tuning Fine Tuning Programme edit Favourite programme Calling the programme table 9 Setting up Picture adjustment Picture adjustment 14 Sound adjustment Sound adjustment Stereo/Dual reception / NICAM Sound output selection 15 Time setting Clock Off time / On time 17 Other functions TV, AV and PC monitor modes Child lock / Blue back (option) Auto sleep / Sleep timer 18 Teletext (option) Switch on/off SIMPLE text TOP text (option) FASTEXT mode Special teletext functions 20 Connection of external equipment Aerial socket DVD in sockets / DTV in sockets Audio/Video in sockets S-Video/Audio in sockets (SAV) (option) Headphone socket 23 Connection of PC Picture adjustment PC in socket (D-Sub 25 Troubleshooting 2 reception jack) check list 27 Installation Power PR VO L This set AC mains the is indicat- OK supply, voltage ed on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. a. Open the back panel cover. (option) b. After connecting the power cord to the set, connect the power operates cord to c. an on an as M ENU TVV IDEO ON OF AC mains. Close the back panel cover. (option) PR VOL OK ENU TV IDEO Warning ON OF To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, damage or b the Active Matrix LCD permanently. Service Never remove the back cover of the set high voltage and other hazards. If ly, unplug it and call your dealer. as this can the set does not expose you to operate proper- Aerial Connect the aerial cable to the socket marked +75 Ω For the best reception an on the back. outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto screen. Care should be taken not to expose the set to any the unnecessary vibration, moisture, dust set is in or heat. Also position to allow a free flow the ventilation openings on the back cover. The standing angle can be adjusted as shown placed a in When you install the set to use the wall (optional parts), fix it carefully so as not to drop. Note : ensure that the of air. Do not pictures. mounting cover bracket In RF/RT-15LA50 model, if you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV. -3° 15° Cleaning Unplug the set before cleaning the face of the LCD Screen. Dust the set by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners. 3 Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel adjusted with the buttons on the side of the set. Remote control handset POWER MUTE 1 1 2 Before you use the remote control 8 teries. See the next page. 1. 3 POWER switches the set 2 4 5 6 7 8 9 2. 0 3 from standby or off to standby or directly standby. NUMBER BUTTONS switches the set 9 3. on from select a number. 4. Φ / Γ (Volume Up/Down) adjusts the volume. adjusts menu settings. 11 TEXT MIX OK INDEX i (Programme Up/Down) a programme or a menu item. switches the set on from standby. LIST PR 5 Δ / Ε selects VOL OK Q.VIEW a menu. SLEEP PR VOL MENU selects 10 TIME on TV/AV/PC MENU 4 handset, please install the bat- 12 accepts your selection REVEAL MODE or displays the current mode. M SIZE HOLD UPDATE 5. Q.VIEW returns to the I/II PSM selects 6 6. 7 a previously viewed programme. favourite programme. I/II selects the language during dual language output (option). selects the sound 7. PSM (Picture Status Memory) preferred picture setting. recalls your (With TELETEXT) 4 broadcast. Location and function of controls 8. MUTE switches the sound 9. off. on or TV/AV/PC selects TV, AV clears the or menu switches the set PC monitor mode. from the on from screen. standby. POWER 10. SLEEP sets the sleep timer. 11. LIST displays the programme table. 12. TELETEXT BUTTONS These buttons For further Note : are details, In teletext MUTE 8 1 2 (option) used for teletext. see 1 2 3 4 5 6 7 8 the 'Teletext' section. 0 3 mode, the SLEEP, LIST and Q.VIEW buttons 9 10 are SLEEP PR used for teletext function. 4 Battery 9 TV/AV/PC MENU VOL Q.VIEW installation VOL OK LIST PR 11 5 The remote control handset is two AAA batteries. powered by type batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and ) marked inside the compartment. To load the - I/II PSM 6 7 Note : To avoid damage from batteries if you do not plan to extended period possible battery leakage, use remove the the remote control handset for an of time. (Without TELETEXT) 5 Location and function of controls Side Side panel RF/RT-15LA50 series panel RF/RT-15LA32 series PR 6 VOL 5 PR 6 VOL 5 OK OK 4 MENUTV/APC 32 7 7 MENUTV/APC 432 ON/F 1 8 8 ON/OF 1 Back panel 9 10 Y AC INPUT (100-240V) PB 12 11 PR H/P S-VIDEO VIDEO L (MONO) AUDIO R 13 14 PC INPUT ANT IN PC SOUND AV COMPONENT(480i/480p/720p/1080i) DVD/DTV IN 1. POWER 7. switches the set on from standby or off to : Power line lives even when the power is off. 2. TV/AV/PC selects TV, AV clears the or menu switches the set 3. 4. PC monitor mode. from the on from screen. a menu. AC INPUT SOCKET on. 10. DVD/DTV IN SOCKETS headphone plug to this socket. (AV) Connect the audio/video out sockets of external OK or displays the current equipment to these sockets. S-VIDEO/AUDIO IN SOCKETS Connect the video out socket of Φ / Γ (Volume Up/Down) adjusts the volume. adjusts menu settings. Δ / Ε (Programme Up/Down) selects a programme or a menu item. switches the set 6 REMOTE CONTROL SENSOR 9. Connect the mode. 6. 8. 12. AUDIO/VIDEO IN SOCKETS accepts your selection 5. (r) mode. 11. HEADPHONE SOCKET standby. MENU selects standby illumniates green when the set is switched standby. Note POWER/STANDBY INDICATOR illuminates red in on from standby. (SAV) an S-VIDEO VCR to the S-VIDEO socket. Connects the audio out sockets of the SVIDEO VCR to the audio sockets 13. PC/SOUND INPUT SOCKETS 14. AERIAL SOCKET as in AV. Basic operation On and off 1. Press the switch it 2. 3. POWER, on Δ / Ε, TV/AV/PC or NUMBER buttons to fully. Press the POWER button. The set reverts to Pull out mains plugs to switch the set off. Note If, while the : set is switched on, the mains nected the set will switch to standby or power plug is replaced in the mains power socket. Programme selection You a can select standby on plug mode. is discon- when the mains POWER programme number with the Δ / Ε or NUMBER buttons. Volume adjustment Press the Φ / Γ button to adjust MUTE the volume. 1 2 3 4 5 6 7 8 MENU 9 TV/AV/PC 0 Quick view Press the Q.VIEW button to view the last programme you were PR watching. Note : This function works only when Favourite programme is a stored VOL OK VOL set to Off. Otherwise each press of this button will select favourite programme. Q.VIEW PR Mute function Press the MUTE button. The sound is switched off and the display W appears. You can cancel it by pressing the MUTE, Φ / Γ, I/II button. I/II Auto Demonstration To review all the programmed in the set, press the OK butcontrol for about 10 seconds. To stop auto demonstration, press any button of the side panel control and POWER button of the remote control. ton of the side On The screen menu menus panel language can be selection displayed language. on the (option) screen in your desired lan- guage. First select your 1. 2. 3. 4. 5. Press the MENU button to select the Special menu. Press the Δ / Ε button to select Language. Press the OK button. Press the Δ / Ε button to select your desired Press the OK button. All the 6. language. displays will appear in the selected language. Press the TV/AV/PC button to return to normal TV viewing. on screen 7 On screen menus The an dialogue operator also between you and your set takes place on screen with The buttons required for the operating steps are menu. displayed. Menu selection press the MENU button to display each menu. Press the Δ / Ε button to select a menu item. The selected menu item changes from white to red. 3. Press the Φ / Γ button to change the setting of a menu item or OK button to display the sub menu. Note : a. In the AV mode, the Station menu is not displayed. b. In the teletext mode, menus are not displayed. c. On some models, the Language or Blue back will not display. 1. 2. Repeatedly AutoOprogramme ManualOprogramme BG 1 System StorageOfrom ProgrammeOedit FavouriteOprogramme NormalOSearch TurboOSearch MENU ()OOKOMENU PR VOL OK ()O}{OMENU Station VOL menu Contrast 100 95 85 80 Brightness Colour Sharpness Storage System Channel V {{{ Search Name PR ()O}{OOKOMENU 1 BG 1 UHF Fine CO01 ()O}{O0- 9OOKOMENU Picture Equalizer Balance AVL menu 0 Off 00O CO 1DOO 05O SO 69 01O CO 03 O06O SO 17 02O CO 12OO 07O SO 22 03O SO 66OO 08O CO 09 04O SO 67OO 09O CO 11 Delete Move ()OOKOMENU Copy Skip ()O}{OOKOMENU Sound menu Off Clock -i-i:i-i-AM -i-i:i-i-AM Off -i-i:i-i-AM Pr. 1 VOL. 30 Off OffOtime OnOtime ()O}{OOKOMENU Input BlueOback AutoOsleep Language - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - - -- ()O}{OOKOMENU Time ChildOlock - menu TV Off Off Off Flat Music Movie Speech User 0.1O0.5O1.5O5.0O10OKHz ()O}{OMENU Special TV programme 8 ()OMENU menu Setting up TV stations Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the Δ / Ε grammed. or NUMBER buttons to scan the stations you have proStations can be tuned using automatic or manual modes. Auto programme Station Menu AutoOprogramme ManualOprogramme ProgrammeOedit FavouriteOprogramme ()OOKOMENU tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. 2. 3. press the MENU button to select the Station menu. Press the Δ / Ε button to select Auto programme. Press the OK button to display the Auto programme menu. Repeatedly BG 1 System StorageOfrom NormalOSearch TurboOSearch ()O}{OMENU 1 2 3 4 5 6 7 8 4. 5. 6. 7. Press the Δ / Ε button to select with the Φ / Γ button; System. Select a TV Option: In some models, Only can 0 system BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the Δ / Ε button to select Storage from. Select the beginning programme number with the Φ / Γ button or NUMBER buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the Δ / Ε button to select Normal or Turbo search. 9 TV/AV/PC MENU PR VOL OK VOL PR select Start. Note : Turbo search is further faster than Normal search and in some models, these searches will automatically store all receivable stations. b. If the programmed station has poor quality sound, select the system again in the Manual programme menu. 8. Press the OK button to begin auto programming. a. System StorageOfrom NormalOSearch TurboOSearch 1 BG 1 CO15 2% MENU (Normal Search) 9. System StorageOfrom NormalOSearch TurboOSearch 1 BG 1 CO38 2% MENU (Turbo Search) All receivable stations are stored. To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. Press the TV/AV/PC button to return to normal TV viewing. 9 TV stations Setting up Station Menu AutoOprogramme ManualOprogramme ProgrammeOedit FavouriteOprogramme ()OOKOMENU Manual programme tuning Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. 2. 3. press the MENU button to select the Station menu. Press the Δ / Ε button to select Manual programme. Press the OK button to display the Manual programme Repeatedly menu. Storage System Channel V UHF Fine Search Name 1 2 1 BG 1 {{{ CO01 3 ()O}{O0- 9OOKOMENU 4 5 6 7 8 9 4. MENU 5. button TV/AV/PC 0 7. 8. PR OK or NUMBER buttons. Any 99) with the Φ / Γ number under 10 is entered with 6. VOL Press the Δ / Ε button to select Storage. Select the desired programme number (0 to a numeric '0' in front of it, i.e. '05' for 5. Press the OK button. Press the Δ / Ε button to select System. Select a TV system with the Φ / Γ button on the System pull- down menu; BG : (Asia/New VOL PR 9. I : DK : M : Zealand/M.East/Africa/Australia) (Hong Kong/South Africa) (East Europe/China/Africa/CIS) (USA/Korea/Philippines) (option) Press the OK button. 10. Press the Δ / Ε button to select Channel. 11. Press the Φ / Γ button to select V/UHF 12. 13. 14. 15. or Cable on the Channel pull-down menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the OK button. Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching on the Search pull-down menu. If a station is found the search will stop. Press the OK button to store it. The display Stored will appear. Storage System Channel Fine Search Name V UHF 1 BG 1 {{{ CO01 Stored 16. To store another station, repeat steps 4 to 15. 17. Press the TV/AV/PC button to return to normal TV 10 viewing. TV stations Setting up Assigning 1. Repeat 2. 3. 4. 5. 6. 3. name Press the Γ button and then Δ / Ε button to use a blank, +, -, alphabet A to Z. pressing the Φ / Γ button and then the numeric 0 to 9 and the Select the next position by make your choice of the second character, and so Press the OK button. Press the TV/AV/PC button to return to normal TV Station Menu AutoOprogramme ManualOprogramme ProgrammeOedit FavouriteOprogramme ()OOKOMENU on. viewing. tuning Normally 2. station the 'Manual programme tuning' steps 1 to 3. Press the Δ / Ε button to select Name. Fine 1. a fine tuning is only necessary if reception is poor. the 'Manual programme tuning' steps 1 to 3. Press the Δ / Ε button to select Fine. Press the Φ / Γ button to fine tune for the best picture and 1 2 3 4 5 6 7 8 Repeat sound. MENU Storage System Channel V Fine Search Name UHF 9 TV/AV/PC 0 1 BG 1 {{{ CO01 PR ()O}{OOKOMENU VOL 4. 5. OK VOL Press the OK button. Press the TV/AV/PC button to return to normal TV The finely tuned programme will be indicated ber during programme selection. by a viewing. yellow num- PR 11 Setting up Station Menu AutoOprogramme ManualOprogramme ProgrammeOedit FavouriteOprogramme TV stations Programme edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. ()OOKOMENU 1. 2. 3. press the MENU button to select the Station menu. Press the Δ / Ε button to select Programme edit. Press the OK button to display the Programme edit menu. Repeatedly 00- --- - O05O SO 69 01O CO 03OO 06O SO 17 02O CO 12OO 07O SO 22 03O SO 66OO 08O CO 09 04O SO 67OO 09O CO 11 Delete Move Copy Skip ()O}{O OKOMENU 1 2 3 4 5 6 7 8 9 Deleting 1. 2. TV/AV/PC MENU 0 a programme Select a programme to be deleted with the Δ / Ε or Φ / Γ button. Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. 00- --- - O05O SO 69 01O CO 03OO 06O SO 17 02O CO 12OO 07O SO 22 03O SO 66OO 08O CO 09 04O SO 67OO 09O CO 11 PR Delete VOL OK VOL MENU PR Copying 1. 2. a programme Select a programme to be copied with the Δ / Ε Press the GREEN button. All the following programmes are shifted down Moving 1. 2. 3. or Φ one / Γ button. position. a programme Select a programme to be moved with the Δ / Ε or Φ / Γ button. Press the YELLOW button. Move the programme to the desired programme number with theΔ/ΕorΦ/Γbutton. 4. Press the YELLOW button 00- --- again - to release this function. O05O SO 69 01O CO 03OO 06O SO 17 02O CO 12OO 07O SO 22 03O SO 66OO 08O CO 09 04O SO 67OO 09O CO 11 Move0Off ()O}{O MENU a programme number Select a programme number to be skipped with the Δ / Ε or Φ / Γ button. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped pro- Skipping 1. 2. 3. gramme. When a programme number is skipped it means that you will be unable to select it using the Δ / Ε button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Press the TV/AV/PC button to return to normal TV 12 viewing. Setting up TV stations Favourite programme This function lets you select your favourite programmes 1. 2. 3. Station Menu AutoOprogramme ManualOprogramme directly. Repeatedly press the MENU button to select the Station menu. Press the Δ / Ε button to select Favourite programme. Press the OK button to display the Favourite programme ProgrammeOedit FavouriteOprogramme ()OOKOMENU menu. Off - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ()O}{OOKOMENU 4. 5. 6. 7. 8. Press the Φ / Γ button to select On or Off. Press the Δ / Ε button to select -----. Select a desired programme with the Φ / Γ button or NUMBER buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. To store another programme, repeat steps 5 to 6. You can store up to 5 programmes. Press the TV/AV/PC button to return to normal TV viewing. -- Repeatedly 1 2 3 4 5 6 7 8 MENU 9 TV/AV/PC 0 press the Q.VIEW button to select stored favourite pro- grammes. PR Calling the programme table VOL You can check the programmes stored in the memory the programme table. OK VOL by displaying Q.VIEW PR LIST Displaying programme table Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. 00- - - - - OO05O SO 69 01O CO 03OO 06O SO 17 02O CO 12OO 07O SO 22 03O SO 66OO 08O CO 09 04O SO 67OO 09O CO 11 ()O}{O OKOMENU Note : a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. a programme in the programme table Select a programme with the Δ / Ε or Φ / Γ button. Then press the OK button. The set switches to the chosen programme number. Selecting Paging through There are a programme table 10 programme table pages in which contain 100 pro- grammes. Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages. Press the TV/AV/PC button to return to normal TV viewing. 13 Picture Picture Menu Contrast 100 95 85 80 Brightness Colour Sharpness Picture You can ness adjustment adjustment adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer. and tint ()O}{OOKOMENU 1. 2. 3. press the MENU button to select the Picture menu. Press the Δ / Ε button to select the desired picture item. Press the Φ / Γ button to make appropriate adjustments. Repeatedly Contrast Brightness Colour Sharpness 4. 85 95 85 80 Press the OK button to store it for the picture User. Press the TV/AV/PC button to return to normal TV MENU TV/AV/PC To recall your preferred setting, press the PSM button until the desired picture (Dynamic, Standard, Mild, Game or User) appears. The picture Dynamic, Standard, Mild and Game are programmed for optimum picture reproduction at the factory and cannot be changed. PR VOL VOL OK PR PSM 14 viewing. Sound Sound You adjustment adjustment Equalizer Balance AVL select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an Sound Menu 0 Off can Speech equal 1. 2. 3. volume level even if you change ()OOKOMENU programmes. press the MENU button to select the Sound menu. Press the Δ / Ε button to select the desired sound item; Equalizer, Balance or AVL. Press the Φ / Γ button to make desired adjustment. Repeatedly Press the OK button in Equalizer to set the Equalizer User. Flat Music Movie Speech User 0.1O0.5O1.5O5.0O10OKHz ()OMENU MENU Press the Δ / Ε button to select your Music, Movie, Speech or User. To set the Equalizer User, a. preferred setting ; TV/AV/PC Flat, Select User by pressing the Δ / Ε button. a sound band by pressing the Φ / Γ button. PR b. Select sound level with the Δ / Ε button. d. Press the OK button to store it for the sound User. c. Select The appropriate display Stored viewing. The sound programmed for changed. Flat, Music, Movie and Speech sound reproduction at the factory OK VOL PR appears. Press the TV/AV/PC button to return to normal TV good VOL are and cannot be 15 Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. for dual language broadcast programme is received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loud- Language selection If a speakers. DUAL I+II sends NICAM a separate language to each loudspeaker. reception If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. 1. 2. I/II 3. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. Sound output selection In AV mode, you can select output sound for the left and right loud- speakers. press the I/II button to select the sound output. Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud- Repeatedly L+R : L+L : R+R 16 : speaker. Audio signal speakers. Audio signal speakers. from audio L input is sent to left and right loud- from audio R input is sent to left and right loud- Time setting Clock Clock OffOtime You must set the time 1. 2. 3. correctly before using on/off time function. press the MENU button to select the Time menu. Press the Δ / Ε button to select Clock. Press the Γ button and then press the Φ / Γ button to select the desired timer item (hour, minutes). Repeatedly 4. Make desired 5. timer item. Press the OK button. 6. Press the TV/AV/PC button to return to normal TV adjustment with the Δ / Ε button OnOtime Time Menu -i-i:i-i-AM -i-i:i-i-AM Off -i-i:i-i-AM Pr. 1 VOL. 30 Off ()O}{OOKOMENU the desired on viewing. Off time The off timer automatically switches the set to standby at the pre- set time. 1. 2. 3. 4. press the MENU button to select the Time menu. Press the Δ / Ε button to select Off time. Press the Γ button and then press the Φ / Γ button to select the desired timer item (hour, minutes). Repeatedly Make desired adjustment with the Δ / Ε button on MENU the desired TV/AV/PC PR timer item. 6. Press the Γ button and then Δ / Ε button to select On Press the OK button. 7. Press the TV/AV/PC button to return to normal TV 5. or Off. VOL OK VOL PR viewing. On time The on timer automatically switches on at the preset time with desired programme number and volume. 1. 2. 3. press the MENU button to select the Time menu. Press the Δ / Ε button to select On time. Press the Γ button and then press the Φ / Γ button to select Repeatedly the desired timer item; Pr. or VOL.. with the Δ / Ε button --:--, 4. Make desired timer item. 5. 6. Press the Γ button and then Δ / Ε button to select On Press the OK button. 7. Press the TV/AV/PC button to return to normal TV adjustment on the desired or Off. viewing. Note : In the event of power interruption (disconnection or power failure), the clock must be reset. b. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. c. Once the on or off time is set, these functions operate daily at the preset time. a. 17 Other functions Special TV Off Off Off Input Menu ChildOlock BlueOback AutoOsleep Language TV, AV and PC monitor modes Inputs when be set for TV, AV or PC monitor mode. AV mode is used video cassette recorder (VCR), or other equipment is con- can a nected to the set. ()O}{OMENU Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. 2. 3. press the MENU button to select the Special menu. Press the Δ / Ε button to select Input. Press the Φ / Γ button to select TV, AV, SAV, COMPONENT Repeatedly PC. The three AV and PC monitor modes or 1 2 3 AV SAV 4 5 6 COMPONENT are : VCR connected to the AV sockets of the set S-VIDEO VCR connected to the S-VIDEO sockets of the set : : : DVD/DTV connected to the DVD/DTV IN sock- ets of the set 7 8 MENU 9 PC 4. 0 PERSONAL COMPUTER connected to the PC socket of Repeatedly viewing. press the TV/AV/PC button to return to normal TV Alternatively you can select the TV/AV/PC button. PR VOL : the set TV/AV/PC VOL In AV mode, to return to TV TV, AV or PC mode mode, press the by pressing the Δ / Ε or NUMBER but- tons. PR Child lock The TV can be set so control it. This feature 1. 2. 3. 4. that the remote control handset is needed to can be used to prevent unauthorized viewing. press the MENU button to select the Special menu. Press the Δ / Ε button to select Child lock. Press the Φ / Γ button on the remote control handset to select On. Press the TV/AV/PC button to return to normal TV viewing. Repeatedly With the lock on, the display Child lock on appears on the screen if any button on the side panel is pressed while viewing the TV. Note : The display Child lock on will not appears on the screen if any button on the side panel is pressed while displaying the menus. 18 Other functions Blue back (option) BlueOback If you select On on the Blue back ground on the appears screen pull-down when there is menu, the blue backno or poor Special TV Off Off Off Input ChildOlock AutoOsleep Language Menu signal. ()O}{OMENU 2. Repeatedly press the MENU button to select the Press the Δ / Ε button to select Blue back. 3. Press the Φ / Γ button to select On 4. Press the TV/AV/PC button to return to normal TV 1. Auto or Special menu. Off. viewing. sleep If you select Auto sleep On the set will automatically switch itself standby mode approximately ten minutes after a TV station stops to broadcasting. 3. press the MENU button to select the Press the Δ / Ε button to select Auto sleep. Press the Φ / Γ button to select On. 4. Press the TV/AV/PC button to return to normal TV 1. 2. Repeatedly Special menu. MENU TV/AV/PC viewing. PR Sleep timer You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the VOL SLEEP VOL PR preset time elapses. Press the SLEEP button to select the number of minutes. The dis- 0 will appear on the screen, followed by 10, 20, 30, 60, 90, play 120, 180 and 240. The timer begins to count down from the number of minutes selected. Note a. b. c. : To view the remaining sleep time, press the SLEEP button once. sleep time, repeatedly press the SLEEP button until the display 0 appears. In the event of power interruption (disconnection or power failure), the set releases the preset sleep time. To cancel the 19 Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. Teletext is a a set free service broadcast by most TV stations which gives information on news, weather, television pro- up-to-the-minute grammes, share prices and many other topics. The teletext decoder of this TV FASTEXT can support the SIMPLE, TOP and systems. SIMPLE (standard teletext) consists of a num- ber of pages which are selected by directly entering the correpage number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. sponding 1 2 3 Switch on/off 4 5 6 7 8 Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or TV/AV/PC button to switch off teletext. The previous mode reappears. 9 TV/AV/PC 0 PR SIMPLE text OK Page selection PR 1. Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number. 2. The Δ / Ε button TEXT MODE M lowing can be used to select the preceding or fol- page. a colour button in LIST mode If the TV is in SIMPLE text, TOP text or FASTEXT M button to switch to LIST mode. Programming mode, press the Four teletext page numbers of your choice can be colour coded and selected by pressing the corresponding coloured button on easily the remote control handset. 1. Press 2. Using 3. 4. 20 coloured button. the NUMBER buttons, select the page you wish to pro- a gramme. Press the OK button. Then the selected page is stored as the selected page number with blinking once. From now on, you can select this page with the same coloured button. The three other coloured buttons are programmed in this way. Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with auto3. 4. matic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the Δ button can be used. The red button permits to return to previous selection. Alternatively the Ε button can be used. 1 2 3 Direct page selection 4 5 6 Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in 7 8 9 TOP mode. 0 FASTEXT mode PR The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. PR Page selection 1. 2. Press the You can button to select the index page. select the pages which are colour coded i tom line with the 3. 4. along the bot- coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER same buttons in FASTEXT mode. The Δ / Ε button can be used to select the lowing preceding or INDEX i fol- page. 21 Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE Selects double height text. enlarge the top button again to enlarge Press this button to Press this 1 2 3 4 5 6 7 8 9 page. Press this button to return to the normal display. UPDATE Displays the 0 again half of the page. the bottom half of the TV picture on the screen teletext page. The display corner of the screen. When the while waiting for the new will appear at the top left hand updated page is available then will change to the page number. Press this button to view the updated teletext page. display PR HOLD Stops TIME SIZE the automatic page PR text page consists of 2 MIX stop symbol is displayed REVEAL change which will occur if a tele- sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the or more at the top left-hand corner of the and the automatic page change is inhibited. To continue press this button again. screen HOLD UPDATE MIX Displays the teletext pages superimposed on the TV picture off press this button again. picture. To switch the TV TIME When viewing a the time at the button again TV programme, press this button to display corner of the screen. Press this top right hand to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or the sub page, press the NUMBER buttons. change Press 22 again to exit this function. RED/GREEN, Δ / Ε or Connection of external You can connect additional etc. to your set. Examples equipment, are such as equipment VCRs, camcorders shown below. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket of 2. the set. Connect the aerial cable to the RF aerial in socket of the VCR. 3. 4. 5. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on VCR the VCR. DVD in sockets 1. Connect the DVD or Y PB PR) output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y of the DVD to the DVD/DTV IN sockets (Y PB PR) of the set. 2. Connect the audio cable from the DVD to the AUDIO sockets 3. of the set. Press the TV/AV/PC button to select COMPONENT. Press the PLAY button on the DVD. 4. The DVD playback picture appears on the DVD screen. DTV in sockets 1. Connect the SET TOP PB 2. PR) outputs to the DVD/DTV IN sockets (Y of the set. Connect the audio cable from the SET TOP to the AUDIO sockets of the set. 3. DTV Receiver Press the TV/AV/PC button to select COMPONENT. Audio/Video in sockets 1. Connect the audio/video out sockets of the VCR to audio/video 2. in sockets of the set. Press the TV/AV/PC button to select AV. 3. Press the PLAY button The VCR on playback picture the VCR. appears on the screen. Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. VCR 23 Connection of external equipment S-Video/Audio in sockets When connecting picture quality will 1. an (SAV) (option) S-VIDEO VCR to the S-VIDEO be further socket, the improved. Connect the S-Video socket of the VCR to the S-VIDEO socket of the set. 2. S-VIDEO VCR Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set. 3. 4. Select SAV by pressing the TV/AV/PC button Press the PLAY button on the VCR. The VCR playback picture Headphone appears on the repeatedly. screen. socket Insert the headphone plug to the headphone socket of the set. You through the headphone and TV's speaker. To adjust the headphone volume, press the Φ / Γ button. If you press the MUTE button, the sound from the headphone and TV's speaker are switched off. can 24 listen to the sound Connection of PC Picture You can adjustment adjust picture contrast, brightness, tion, clock, clock phase, auto-configure and 1. Repeatedly horizontal/vertical reset as you posiprefer. press the TV/AV/PC button to select the PC moni- tor mode. 2. Press the MENU button to select the Picture menu. PC 80 60 0 0 40 13 Input Contrast Brightness H-Position V-Position Clock ClockOOphase Auto-configure Reset ()O}{OOKOMENU 3. 4. Press the Δ / Ε button to select the desired Press the Φ / Γ button to make appropriate H-Position / V-Position This function is to adjust picture item. adjustments. MENU MENU picture to left/right and up/down as TV/AV/PC you prefer. Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. PR VOL VOL OK PR Clock Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Auto-configure This function is for the automatic adjustment of the screen posi- tion, clock and clock phase. The displayed image will disappear for a few seconds while the Auto-configuration is in process. PSM Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually. Reset This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed. 5. Press the OK button to store it for the PC monitor picture. The 6. display Stored appears. Repeatedly press the TV/AV/PC viewing. button to return to normal TV 25 Connection of PC PC in socket 1. 2. (D-Sub jack) Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the PC SOUND sockets of the set. 3. PERSONAL COMPUTER 4. Press the TV/AV/PC button to select PC. on the PC, and the PC screen appears Switch The set can be If you have operated Note : block (not supplied) signal an as on the set. the PC monitor. Apple macintosh, connect the VGA desktop from the 3 row 15 pin to 2 row 15 pin with the cable and connect the VGA desktop block to the Macintosh. Displayable Monitor Specification MODE Resolution Horizontal Frequency(KHz) VGA SVGA (MAC) XGA Vertical Frequency(Hz) 640x400 37.9KHz 85Hz 640x480 31.5KHz 60Hz 640x480 35.0KHz 67Hz 640x480 37.9KHz 72Hz 640x480 37.5KHz 75Hz 640x480 43.3KHz 85Hz 800x600 35.2KHz 56Hz 800x600 37.9KHz 60Hz 800x600 48.1KHz 72Hz 800x600 46.9KHz 75Hz 800x600 53.7KHz 85Hz 832x624 49.7KHz 75Hz 1024x768 48.4KHz 60Hz 1024x768 56.5KHz 70Hz 1024x768 60.2KHz 75Hz (Synchronization input form : separate) Note : If the set is cold, there may be a small "flicker" when the set is switched on. This is normal, there is nothing wrong with the set. b. If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used under the other resolutions, some scaled or processed pictures may appear on the screen. The set has been pre-adjusted to the mode VESA 1,024x 768@60Hz. c. Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance. d. Do not press the LCD screen with your finger for a long time as this may incur some afterimages. e. When the PC screen appears on the set, some message may appear on the screen, the message is different depending on Window system version (Win98, 2000). If message appears, click the "Next" continuously until message clears. f. If the message "out of Range" appears on the screen, adjust the PC as in the 'Displayable Monitor Specification' section. a. DPM (Display Power Management) mode When the PC is in the power saving mode, automatically the itor goes into DPM mode to save the energy. 26 mon- Troubleshooting check list Symptoms No picture, no Sound sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Incorrect position Vertical bars or stripes on background Horizontal noise Signal Cable message appears Check these items and try to these adjust The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged Check aerial (broken lead?) into TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets Auto-configure or adjust (VCR only) the H/V position Auto-configure or adjust Clock Auto-configure or adjust Clock Phase Is the Signal Cable connected or loose 27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project