LG | RT-54NA13RB | LG RT-54NA13RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0431A
(MP03AB,
cover
require
and
quote this infor-
service.
100R/U/Z
TX)
b
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
8
On
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning / Programme edit
Favourite programme
Calling the programme table
Setting
10
Picture adjustment
PSM (Picture Status Memory)
DRPC (Digital Reality Picture Clarity)
VM (Velocity Modulation)
Picture adjustment / Auto convergence
Convergence (option) / Picture format
Turbo picture selection (option)
15
(option)
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
19
Time setting
Clock / On/Off time
Auto sleep
22
Other functions
TV and AV modes / VGA mode
Auto AV switching (option)
Child lock / Sleep timer
PIP
23
(option)
25
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
26
Connection of external equipment
Aerial socket / Euro scart sockets (option)
Audio/Video in/out sockets (option)
Variable Audio out sockets (AUDIO OUT)
S-Video/Audio in sockets (S-AV) (option
Component in sockets / Monitor out sockets
PC Input/Audio in sockets (option)
29
Troubleshooting
2
check list
Back
cover
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
For the best
cover.
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
in
position to allow a free flow
openings on the back cover.
the
set on a sloping or unstable
place
placed
a
of air. Do not
cover
the ventilation
Do not
on
the bottom of the set may
When
ture
displaying
still
pictures
cause
such
it to
as
move
persisted
on
the
the casters
videogames, 16:9
a long time,
format, PIP display, and station label for
may be
area as
and to be
damaged.
4:3 picthe image
or
screen.
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby
Laboratories. (option)
3
Location and function of controls
POWER
1
TV/AV
MULTIMEDIA
2
SOUND
34
TURBO
PICTURE
PIP
PR+
SWAP
MENU
INPUT
PR
MUTE
OK
2.
TV/AV
selects TV or AV mode.
switches the set on from
3.
TURBO SOUND BUTTON
selects Turbo sound.
4.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode 12 sub
5.
MENU
selects
6.
D / E
VOL
6
PR
123
456
7
7
8
9
0
PSM
SSM
17
8
POSITION
SCAN
STILL
18
SIZE
MIX
TIME
SLEEP
REVEAL
?
LIST
M
19
9
10
I/II
Q.VIEW
STOP
P/STILL
11
REW
PLAY
ARC
REC
SOUND
20
21
FF
TELETEXT /
(With
be controlled with the remote control handset.
also be adjusted with the buttons on the front
14 Before
you use the remote control handset, please install the batteries. See the next page.
15
1. POWER
switches the set on from standby or off to standby.
16
5
VOL
can
can
13 Remote control handset
TEXT
PR-
12
All the functions
Some functions
panel of the set.
a menu.
(Programme Up/Down)
adjusts
menu
OK
PICTURE
settings.
accepts your selection
PIP
PR-
MENU
INPUT
PR
5
7
8
9
PSM
0
SSM
POSITION
SCAN
STILL
SLEEP
LIST
Q.VIEW
ARC
SIZE
I/II
(Without TELETEXT/With PIP)
4
NUMBER BUTTONS
switches the set on from
8.
PSM (Picture Status
recalls your preferred
9.
SLEEP
sets the
MUTE
6
or
7.
PR+
SWAP
pictures.
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
PIP)
4
standby.
sleep
displays
the current mode.
standby or directly
Memory)
picture setting.
select
a
number.
timer.
10. I/II
selects the language during dual language broadcast.
selects the sound output (option).
11. VCR BUTTONS
control a LG video cassette recorder.
Location and function of controls
12. MULTIMEDIA
selects Component 1
or
POWER
Component 2 modes.
1
TV/AV
13. TURBO PICTURE BUTTON
selects Turbo picture.
2
SOUND
MULTIMEDIA
TURBO
PICTURE
12
13
3
14. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
MENU
15. SWAP
returns to the
selects
a
VOL
16. MUTE
switches the sound
on or
18. STILL
freezes motion of the
picture.
the programme table.
VOL
picture
1
2
3
4
5
6
7
8
9
PSM
0
SSM
17
8
SLEEP
format.
LIST
STILL
Q.VIEW
ARC
19
18
9
I/II
21. Q.VIEW
20
21
10
returns to the
a
viewed programme.
favourite programme.
previously
STOP
11
* : No function
COLOURED BUTTONS
TELETEXT
OK
PR
19. LIST
selects
16
off.
7
20. ARC
select your desired
MUTE
6
17. SSM (Sound Status Memory)
recalls your preferred sound setting.
displays
PR
5
viewed programme.
favourite programme.
previously
models)
or
: These buttons
programme edit.
are
used for teletext
REW
P/STILL
REC
PLAY
FF
(only
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
(Without PIP/TELETEXT)
Battery
installation
SOUND
PICTURE
TEXT
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
14
-
MENU
PR
MUTE
5
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
7
8
9
PSM
0
SSM
UPDATE
INDEX
SIZE
TIME
MIX
I/II
SLEEP
HOLD
REVEAL
M
Q.VIEW
?
LIST
ARC
(With TELETEXT/Without PIP)
5
Location and function of controls
Front
?
panel
RT-44/49/54NA13/14 series
?
2
RT-44/49/54NA23/24 series
2
3
PR
MUTE
PR
MENU
VOL
PR
MENU
VOL
OK
VOL
OK
MNU
1
TV/AV
8
OL
MUTE
PR
TVAV
ON/OFF
N/OFF
OK
MENU
TV/AV
MUTE
PR
TV/AV
14
?
PR
VOL
MUTE
5678
OK
VOL
ON/OFF
RT-62NA33 series
3
675 4
2
?
RT-44/49/54NA43/44 series
9
TVAVOK
MENU
BY
INDEX STAN
POWERON
VOL
PR
1
2
PR
MUTE
PR
MENU
5678
3
PR
OK
VOL
TV/AV
MUTE
PR
MNU
VOL
OK
VOL
1
VOL
TV/AV
POWR
TV/AV
OK
MENU
INDEX
STAND BY
POWER ON
VOL
PR
4
8
?
RT-44/49/56NZ23 series
7610
?
RT-44/54NA61 series
2
2
TVAV
MNU
OL
OK
PR
TV/AV
MENU
OK
8674
6
11
41
1
TV/AV
3
4
VOL
11
ON/OFF
MENU
OK
MUTE
VOL
PR
PR
3
8675
3
Location and function of controls
Front
panel
RT-40/45/57NZ60 series
?
AV3
2
TV/AV
1
TV/AVMENU
OK MUTE
VOL
MENU
OK
PR
VOL
MUTE
S-VIDEOL/MN
PR
12
8
6
7
4
5
11
AUDIO
3
R
?
RT-39NZ43 series
2
S-VIDEOL/MN
12
TV/AV
1
TAV
NU
O
NDEX
OL
MENU
OK
VOL
INDEX
PR
AUDIO
R
R
AV3
86710
3
411
(Side panel)
1.
MAIN POWER
switches the set
2.
3.
off.
:
:
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
a
or a menu
programme
switches the set on from
4.
illuminates
REMOTE CONTROL SENSOR
selects
(Light Emitting Diode) DISPLAY (option)
11. LED
on or
item.
brightly
:
LOCK
:
nal
equipment
standby
to these sockets.
Connect the video out socket of
(option)
the
audio
on or
MENU
selects
a menu.
or
displays
OUT sockets
or
AV mode.
switches the set
9.
LCD
/ text from the
on
from
S-
DISPLAY
(option)
switches LED DISPLAY
on or
are
detachable
by
on
red
screen.
standby.
(Liquid Crystal Diode)
10.INDEX
the
in AV3.
the back panel of the set as
(+) and black (-) knobs.
Note : Before placing the speakers, screw the
speaker legs to the holes on them.
TV/AV
menu
of
as
(option)
left/right loud-speakers
indicated
clears the
sockets
and need to be connected to the SPEAKER
the current
mode.
selects TV
out
LEFT/RIGHT LOUD-SPEAKERS
The
OK
accepts your selection
8.
S-VIDEO
off.
13. CENTRE SPEAKER
7.
an
VIDEO VCR to the audio sockets
switches the sound
6.
(S-AV)
VCR to the S-VIDEO socket.
on.
Connect
MUTE
(AV3)
S-VIDEO/AUDIO IN SOCKETS
mode.
5.
on.
Connect the audio/video out sockets of exter-
when the set is in
dims when the set is switched
:
SLEEP
the set is switched
12. AUDIO/VIDEO IN SOCKETS
standby.
POWER/STANDBY INDICATOR
illuminates
STEREO
brightly when
PAL/SECAM input signal indicator
NTSC input signal indicator
STEREO sound indicator
SLEEP timer indicator
CHILD LOCK setting indicator
off.
CASTERS
(on the bottom)
the set easily.
Note : Shown is a simplified representation of
front or side panel. Here shown may be some*
turn and
move
what different from your set.
7
Basic
operation
On and off
1.
2.
3.
4.
POWER
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV,
MULTIMEDIA or NUMBER buttons on the remote control handset
to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
TV/AV
TURBO
SOUND
MENU
PR
MUTE
Programme
selection
You can select
buttons.
a
Volume
programme number with the D / E
or
NUMBER
adjustment
Press the F / G button to adjust the volume.
Note : When the TV
(speaker) is On, it's available.
VOL
OK
VOL
Quick view
Press the Q.VIEW button to view the last programme you
were
watching.
Note
PR
:
This function works
only
when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
1
2
3
4
5
6
7
8
9
0
SSM
favorite programme.
Mute function
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
by pressing
display
the MUTE, F / G, SSM, I/II, TURBO
Auto Demonstration
I/II
Q.VIEW
programmed in the set, press the OK butcontrol for about 5 seconds. To stop auto
demonstration, press any button of the front panel control or
POWER button of the remote control.
To review all the
ton of the front
On
The
screen
menus
panel
language
selection
be displayed on the
guage. First select your language.
1.
2.
menu
can
(option)
screen
in your desired lan-
Press the MENU button and then D / E button to select the
Special
Press
menu.
the
G
button
and
then
D
/
E
button
to
select
Language.
3.
Press the G button and then D / E button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
8
On
The
an
dialogue
operator
also
screen menus
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
4.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down menu.
Change the setting of an item in the sub or pull-down menu with
F/GorD/E.
You can move to the higher level menu by pressing the F button
and to move to the lower level menu by pressing the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In some models, the Language will not display.
d.
In some models, the Auto convergence will not display, only
the Convergence will display in the Picture menu.
MENU
PR
Auto programme
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
{
{
OBG
OOI
ODK
OOM
VOL
()O}{O OKOMENU
Station
OK
VOL
()O}{O OKOMENU
menu
Manual programme
Picture
PSM
DRPC
VM
Contrast
{
Storage
System
{
{
{
Channel
{
{
{
Fine
{
Brightness
{
Sharpness
Convergence
{
Search
Name
Booster
{
Colour
{
{
()O}{O OKOMENU
menu
Programme
Sound
SSM
AVL
DBS
TV
Balance
PR
{
()O}{OOKOMENU
Picture
2
{
{
{
{
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
{
O3OOSO66OOO8OOCO09
{
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
()O}{OOKOMENU
Sound
menu
Time
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
()O}{OOKOMENU
T ime
menu
Special
Language
Input
InputOOO(
{
{
)
ChildOlock
{
{
()O}{OOKOMENU
Special
menu
TV programme
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
can
be stored.
()O}{OOKOMENU
Auto programme
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
MENU
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
OBG
OOI
ODK
OOM
{
{
PR
()O}{O OKOMENU
VOL
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
5.
Press the OK or F button.
6.
Press the D / E button to select Storage from.
7.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
8.
Press the OK button.
9.
Press the D / E button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
4.
Auto programme
Auto programme
System
StorageOfrom
{
{
NormalOsearch
TurboOsearch
{
OCO01O(BG)
{
System
StorageOfrom
{
{
NormalOsearch
TurboOsearch
{
77O7O7O736%
MENU
{
OCO01O(BG)
77O7O7O736%
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting up
Manual programme
TV stations
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
Name
Booster
{
{
2
{
{
()O}{O OKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number with the F / G button or NUMBER
buttons on the Storage pull-down menu. Any number under 10
is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or
'005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
MENU
VOL
PR
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
Name
Booster
{
{
{{{{
{
{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
11
TV stations
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
()O}{OOKOMENU
5.
6.
7.
1 to 3.
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then make
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
MENU
VOL
VOL
1.
2.
3.
4.
5.
6.
PR
1
2
3
4
5
6
7
8
9
0
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
PR
OK
Only
Press
Press
Press
down
Press
pull-
menu.
the OK button.
the MENU button to return to normal TV
Repeatedly press
viewing.
Fine
tuning
Normally
1.
2.
3.
the 'Manual programme tuning' steps 1 to 3.
the D / E button to select Booster.
the G button.
the D / E button to select On or Off on the Booster
Repeat
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Repeat
Manual programme
Storage
System
{
Channel
{
Fine
{
{
Search
Name
Booster
{
{{{{
{
{
}{O OKOMENU
4.
5.
6.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be
ber during programme selection.
12
indicated
by
a
yellow
num-
Setting up
Programme
TV stations
edit
Station
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
Deleting
1.
2.
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
MENU
PR
VOL
VOL
Copying
1.
2.
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or F
one
/ G button.
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
PR
1
2
3
4
5
6
7
8
9
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
Programme
to release this function.
0
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{O MENU
a programme number
Select a programme number to be skipped with the D / E or
F / G button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Favourite programme
This function lets you select your favourite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
programme.
()O}{OOKOMENU
3.
Press the G button.
Favourite programme
AutoOprogramme
ManualOprogramme
{
Off
{
ProgrammeOedit
FavouriteOprogramme
{
56O CO 05
{
}{O()OOKOMENU
4.
5.
6.
MENU
PR
7.
VOL
OK
VOL
8.
9.
Press the F / G button to select On or Off.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
Repeatedly
press the Q.VIEW
favourite programmes.
Calling
PR
1
2
3
4
5
6
7
8
9
0
or
SWAP button to select stored
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
Station
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
LIST
O4OOSO67OOO9OOCO11
Q.VIEW
()}{O OKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Repeatedly press the MENU button to return to normal TV viewing.
There
14
Picture
PSM
1.
adjustment
Picture
(Picture Status Memory)
2.
3.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
PSM
DRPC
VM
Contrast
{
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
()O}{O OKOMENU
Picture
PSM
DRPC
VM
Contrast
{
Dynamic
{
Standard
{
Mild
{
Brightness
{
Game
User
Colour
{
Sharpness
Convergence
{
{
()O}OOKOMENU
4.
Press the OK
5.
Repeatedly
viewing.
You
or F
button.
the
MENU button to return to normal TV
press
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for optimum picture reproduction at the factory and cannot be
changed.
can
also recall
Mild, Game
DRPC
1.
(Digital Reality
Picture
4.
5.
VM
PR
OK
VOL
Clarity)
viewing.
PR
PSM
(Velocity Modulation)
This is the function to enhance the
2.
3.
VOL
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select DRPC.
Press the G button and then D / E button to select On or Off
on the DRPC pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
2.
3.
1.
MENU
or
sharpness
of
image edge.
Press the MENU button and then D / E
button to select the
Picture menu.
Press the G button and then D / E button to select VM.
Press the G button and then F / G button to adjust the vm.
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
1
{
{
}{O OKOMENU
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
Picture
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
You
()O}{O OKOMENU
ness
1.
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC AV only) to the levels you prefer.
can
{
{
Press the MENU button and then D / E
Picture
2.
adjustment
button to select the
menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
50
{
{
()O}{O OKOMENU
3.
Press the G button and then F / G button to make
adjustments
MENU
on
the each sub
PR
Contrast
VOL
appropriate
menu.
OK
80
}{O()OOKOMENU
VOL
4.
Press the OK button to store it for the
5.
Repeatedly
ing.
picture
user.
press the MENU button to return to normal TV view-
PR
Auto convergence
(option)
This function enables you to
adjust the colour convergence of screen
automatically during receiving the signals. When the set is first
installed or it is relocated, the picture may be unstable with three
colour ghosts (red, green, blue). This problem can be solved by
adjusting the colour convergence.
1.
Press the MENU button and then D / E
Picture menu.
button to select the
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
AutoOconvergence
{
{
{
{
{
()O}{OOKOMENU
2.
Press the G button and then D / E button to select Auto con-
vergence.
3.
Press the G button to
adjust
the colour convergence automati-
cally.
Note :
a.
The operating point colour will change in the order of 'blue-greenred'.
b.
Please make sure the surrounding illumination where the TV is
situated remains dark otherwise the screen will become unstable or the message "Ensure lights are dimmed sufficiently" will be displayed on screen after Auto convergence is completed. Auto convergence will then have to be operated again.
16
Picture
adjustment
Picture
Convergence (option)
This function enables you to adjust the colour convergence of
screen all area or 9 points during receiving the signals. When the
set is first installed or it is relocated, the picture may be unstable
with three colour ghosts (red, green, blue). This problem can be
solved by adjusting the colour convergence.
1.
2.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E
button to select
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
{
()O}{OOKOMENU
TV/AV
Convergence.
3.
Press the G button and then D / E button to select 1
or 9
(9 point convergence).
(All
point convergence)
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
MENU
{1
{
9
{
PR
()O}{O OKOMENU
4.
VOL
Press the G button.
The display DE F G is selected in red.
If the display + are unstable with three colour
convergence needs to be adjusted.
ghosts,
OK
VOL
the colour
PR
()O}{O1-9OTV/AVOOKOMENU
()O}{OTV/AVOOKOMENU
If the
display
+
is white, colour convergence
adjustment
is not
necessary.
5.
6.
7.
Press the TV/AV button to select the display DE F G in blue.
: Press the number (1 to 9) button to select
Only selection 9
the position you want to adjust the convergence.
Press the D / E / F / G button to superimpose the display +
(red or blue) with the green one.
The display + is moved to the left, right, up or down by pressing
theD/E/F/Gbutton.
If the red and blue display + are superimposed with the green
display + will be changed to yellow or cyan.
9. Press the OK button to store it for the convergence.
10. Repeatedly press the MENU button to return to normal TV view-
8.
one, the
ing.
Note :
a.
Press the MENU button to cancel the adjustment before saving.
b. If the picture needs to be adjusted more after 1
(All point
convergence) adjustment, you can adjust the 9
(9 point convergence) for the position you want to adjust.
c.
Adjust the convergence according to a broadcasting system
(50Hz or 60Hz) each.
17
Picture
adjustment
Picture format
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
{
()O}{O OKOMENU
You can watch TV in various picture formats; 16:9, 14:9, Zoom,
Auto and 4:3.
In some models, you can watch TV in various picture formats; 4:3
and 16:9.
Repeatedly press the ARC button to select your desired picture format.
4:3
This
TURBO
PICTURE
picture
16:9
You can
format is 4 to 3 of
general
enjoy the cinema (the picture
through the 16:9 mode.
TV.
format of
16:9)
or
general
TV
programme
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is
full.
You can move the screen up or down with D / E button.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
You can move the screen up or down with D / E button.
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
PSM
ARC
Note : In the double window,
ARC function isn't available.
scan
Turbo
(option)
picture
selection
mode and
Component 1080i,
When this function is on, the picture will be more brilliant and distinct than normal. Repeatedly press the TURBO PICTURE button
to switch on or off.
(Turbo Picture off)
(Turbo Picture on)
: If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
Note
18
Sound
SSM
You
adjustment
(Sound Status Memory)
Sound
select your preferred sound setting; Dolby Virtual (option),
Flat, Music, Movie or Speech and you can also adjust the sound
frequency of the equalizer.
1.
2.
3.
can
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
SSM
AVL
DBS
TV
Balance
{
{
{
{
{
()O}{O OKOMENU
Sound
SSM
AVL
DBS
TV
Balance
{
DolbyOVirtual
{
Flat
{
Music
Movie
{
{
Speech
User
{
()O}OOKOMENU
MENU
Dolby Virtual (option)
Dolby Virtual lets you experience panoramic
Sound
PR
effects of sound.
VOL
OK
VOL
Frequency Adjustment
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
Press the G button in User to display the User sub menu.
b. Select a sound band by pressing the F / G button.
c. Select appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
a.
Repeatedly press
You
can
the MENU button to return to normal TV
also recall
a
desired sound
(Dolby
Virtual
with SSM button
SSM
viewing.
(option),Flat,
the remote
control. The sound Dolby Virtual (option), Flat, Music, Movie
and Speech are programmed for optimum sound reproduction at
the factory and cannot be changed.
Music, Movie, Speech
or
User)
on
If you press the SSM button after making appropriate
adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual (option), Flat, Music, Movie or Speech.
Note
:
19
Sound
Sound
Sound
SSM
AVL
DBS
TV
Balance
{
{
{
{
{
()O}{OOKOMENU
adjustment
adjustment
You can adjust AVL (Auto Volume Leveler), DBS, TV Speaker or
balance. AVL automatically keeps on the equal volume level even if
you change programmes. If you switch DBS to on, the set creates
a dynamic bass sound. The Turbo sound creates an all around
sound as in a concert hall.
1.
2.
the MENU button to select the Sound menu.
Press the G button and then D / E button to select the desired
sound item ; AVL, DBS, TV
(Speaker) or Balance
Repeatedly press
Sound
TURBO
SOUND
SSM
{
AVL
{
DBS
{
TV
{
Balance
{
0
()O}OOKOMENU
MENU
PR
In the AVL, DBS and TV (Speaker) on the Sound menu, press
theD/EbuttontoselectOnorOff
VOL
OK
VOL
3.
In the Balance on the Sound menu, make desired adjustment
with the F / G button on the Balance pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
Turbo sound selection
PR
(option)
When this function is on, the sound will be more emphasized and
amplified than normal.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo
I/II
Sound
off)
(Turbo
Sound
on)
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
20
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
Language
If
selection for dual
language
broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the louda
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Commanding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
I/II
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
21
Time
setting
Clock
T ime
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust the hour.
Time
()O}{OOKOMENU
C lock
{
OffOtime
OnOtime
{
AutoOsleep
{
-i-o:o-i- AM
{
()O}{O OKOMENU
4.
5.
6.
Press the G button and then D / E button to
Press the OK button.
Repeatedly press the
MENU button to
adjust
the minute.
return to
normal TV
viewing.
On/Off time
MENU
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
PR
function.
1.
VOL
OK
VOL
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
Time
PR
Clock
{
OffOtime
OnOtime
{
{
-i-o:o-i- AM
AutoOsleep
{
Pr
1
VOLOOO30
Off
()O}{O OKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note :
a.
On time function works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset.
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
e.
Once the on or off time is set, these functions operate daily at
the preset time.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off
on the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
22
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Press the MENU button and then D / E
Special
Language
Input
InputOOO(
{
{
{
)
ChildOlock
{
()O}{O OKOMENU
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4, S-VIDEO4 (option), COMPONENT 1, COMPONENT 2 or VGA (option) on the Input pull-down menu.
TV/AV
Special
Language
Input
InputOOO(
{
{
{
)
ChildOlock
{
TV
AV1
AV2
AV3
AV4
COMPONENT1
COMPONENT2
MENU
()O}OOKOMENU
VCR connected to the AV1 sockets on the set
VCR connected to the AV2 sockets on the set
: VCR connected to the AV3 sockets on the set
: VCR connected to the Euro scart socket on the set (option)
S-VIDEO4 : S-VIDEO VCR connected to the Euro scart socket
on the set (option)
COMPONENT1/2 : COMPONENT connected to the COMPONENT1/2 sockets on the set
VGA : PC connected to the PC (VGA) sockets on the set (option)
Repeatedly press the MENU button to return to normal TV viewAV1
AV2
AV3
AV4
4.
PR
:
:
VOL
VOL
PR
ing.
Alternatively you
can
select the TV
or
AV mode
TV/AV button.
In AV
tons.
mode, to return to TV mode, press the
VGA mode
by pressing
the
D / E or NUMBER but-
(option)
You can adjust picture contrast, brightness, convergence.
1. Press the MENU button and then D / E button to select the
2.
3.
Special
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select VGA on the
Input pull-down
menu.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
O
O
O
O
O
Input
{
Contrast
{
Brightness
{
V-Position
H-Position
{
Convergence
{
{
TV
AV1
AV2
AV3
AV4
COMPONENT1
COMPONENT2
VGA
O
()O}{O OKOMENUOTV
4.
5.
AV
Press the MENU button.
Press the D / E button to select Contrast, Brightness, VPosition, H-Position or Convergence on the VGA mode
menu.
23
Other functions
Special
Language
Input
InputOOO(
{
{
{
)
ChildOlock
{
Contrast
This function is to
adjust
the
display
to the contrast desired.
adjust
the
display
to the
Brightness
This function is to
brightness
Horizontal Position / Vertical Position
This function is to adjust picture to left/right and
()O}{O OKOMENU
desired.
up/down
as
you
prefer.
Convergence
This function enables you to adjust the colour convergence of
screen during receiving the signals.
Note :The convergence isn't suitable to
use
in
case
of no PC cable
signal.
Auto AV
switching (option)
If your VCR
outputs switching voltage when connected to the Euro
socket, the set will switch to AV4 mode automatically. But if
you want to keep on watching TV mode, press the D / E or NUMscart
MENU
VOL
PR
OK
BER buttons.
Press the TV/AV button to return to AV modes.
VOL
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
PR
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child
lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the
screen if any button on the front panel is pressed while viewing the
TV.
SLEEP
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the
menus.
Sleep
timer
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60,
play
90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
---
Note :
a.
To view the
remaining sleep time, press
the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
---
c.
24
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
set with PIP function can
only the
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Note
:
Input
In
Component
1080i mode, PIP function isn't available.
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
ture is displayed as shown below.
Programme
picture.
mode for the sub
input
pic-
PR+
SWAP
AV3
AV4
PIP
PR-
AV2
AV1
number
picture.
mode for the sub
INPUT
Note :
a.
You can also adjust it in the Special menu.
b.
Yon can select the input mode for the sub picture, after connecting the external equipment.
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PR +/- buttons to select a programme for the sub picture.
The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
picture
1/9 size
picture
POSITION
1/2 size
SCAN
STILL
SIZE
Note : If broadcasting system of the main picture for PIP is differ
from sub picture's for PIP, the sub picture not be natural. (ex: In
case that main picture/sub picture is PAL/NTSC system)
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 12
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the SCAN button to select 12 sub pictures.
The selected sub pictures search all the stored stations.
Press the SCAN button again to switch off sub pictures.
25
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TV/AV
TEXT
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
PR
reappears.
OK
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or following page.
Page
1.
PR
1
2
3
4
5
6
7
8
9
0
2.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
M
Four teletext page numbers of your choice can be colour coded
easily selected by pressing the corresponding coloured button
and
on
1.
the remote control handset.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
select this page with the same coloured button.
The three other coloured buttons are programmed in the
way.
26
coloured button.
same
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or following page.
Page
1.
2.
3.
4.
PR
1
2
3
4
5
6
7
8
9
0
27
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the updated teletext page.
HOLD
PR
Stops
1
2
3
4
5
6
7
8
9
the automatic page
change
MIX
REVEAL
if
a
tele-
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button
TIME
occur
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
0
SIZE
which will
text page consists of 2 or more sub pages. The number of
?
again.
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, D / E
NUMBER buttons.
change
Press this button
28
again
to exit this function.
or
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
DVD/DTV INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
(R)
Aerial socket
1.
2.
3.
4.
5.
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
MONITOR
ANT IN
OUTPUT
AUDIO OUTPUT
LL
VIDEO
AV2
AV4
AV1
MONO
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
S-VIDEO
VCR
DVD INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
(R)
Euro scart socket
1.
2.
(option)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
(L)-AUDIO-(R)
(L)-AUDIO-(R)
VARABLE
MONITOR
AUDIOOUTPUT
OUTPUT
ANT IN
LL
VIDEO
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 4 mode automatically. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons.
Otherwise press the TV/AV button
to select AV 4. The VCR
(R)
(L)
on
VIDEO
AV2
AV4
MONO
AV1
MONO
S-VIDEO
VCR
the remote control handset
on the screen.
DVD/DTV INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
playback picture appears
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
You
can
also record programmes received
by
the TV
on
video tape.
ANT IN
OUTPUT
LL
VIDEO
AV2
AV4
AV1
S-VIDEO
MONO
Note
a.
b.
c.
:
Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart can be received. These signals
are transmitted, for example, by a pay TV decoder, game
machine or photo CD unit, etc.
If Euro scart 4 socket has been connected to the VCRs simultaneously, only the AV 4 can be received.
If the set has been disconnected to the external equipment,
only can be selected AV 4.
VCR
DVD/DTV INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
ANT IN
Audio/Video in/out sockets
1.
2.
3.
(option)
can
also record programmes received
out sockets.
VIDEO
AV2
AV4
AV1
MONO
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
OUTPUT
LL
by
the TV
on
video
tape via audio/video
Note :
If you have a mono VCR, connect the audio cable from the VCR
a.
to the AUDIO L/MONO socket of the set.
b.
When the set has been connected to the external equipment,
you can select AV or COMPONENT modes with the remote control handset.
S-VIDEO
VCR
S-VIDEOL/MN
AUDIO
R
AV3
VCR
29
Connection of external
equipment
S-Video / Audio in sockets
When
ity
DVD/DTV INPUT
COMPONENT1
COMPONENT2
connecting
will be further
an
(S-AV) (option)
VCR to the S-VIDEO socket, the
picture qual-
improved.
(480i/480p/576i)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
ANT IN
OUTPUT
LL
VIDEO
AV2
AV4
1.
AV1
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
S-V DEO
MONO
2.
Connect the audio cable from the VCR to the AUDIO sockets of
the set.
VCR
3.
Select AV1
4.
Press the PLAY button
The VCR
Note
:
R
by pressing
on
the TV/AV button
repeatedly.
the VCR.
playback picture appears
simultaneously, only
Component
AUDIO
AV3
on
the
screen.
If both S-VIDEO and VIDEO sockets have been connected to
the VCR
S-VIDEOL/MN
or
the S-VIDEO
can
be received.
in sockets
AV3
1.
S-VIDEO VCR
2.
Connect the COMPONENT VIDEO output sockets
(Y Cb Cr,
YPbPr,YB-YR-YorYPBPR)oftheDVDplayertotheDVD
INPUT VIDEO sockets (Y PB PR) of the set.
Connect the audio cable from the DVD player to DVD
INPUT AUDIO sockets of the set.
3.
Press the TV/AV button to select COMPONENT1
or
COMPO-
NENT2.
4.
DVD/DTV INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
(R)
(R)
(L)
(L)
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
PR
PR
PB
PB
ANT IN
Press the PLAY button
The DVD
AUDIO
OUTPUT
on
the DVD
playback picture appears
player.
on
the
screen.
LL
Y
VIDEO
AV2
AV4
Y
AV1
S-VIDEO
MONO
Note
:
DVD audio
input
can
be output, but DVD video
input
cannot
be output.
DVD
Player
Variable Audio out sockets
The
phono
sockets for
a
Hi-Fi
(AUDIO OUT)
amplifier system
are on
the back of
the set; L=left sound channel, R=right sound channel.
If you connect an amplifier system, you can also play the TV sound
through the stereo amplifier system. TV speaker
speakers muted when pressing the MUTE button.
DVD/DTV INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
ANT IN
OUTPUT
LL
VIDEO
AV2
AV4
AV1
MONO
Amplifier
30
S-VIDEO
and external
Connection of external
equipment
Monitor out sockets
Connect the audio/video in sockets of the other TV
or
monitor to
DVD/DTV INPUT
COMPONENT1
MONITOR OUTPUT sockets of the set.
COMPONENT2
(480i/480p/576i)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
ANT IN
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
OUTPUT
LL
VIDEO
AV2
AV4
AV1
MONO
PC
Input/Audio
in sockets
S-VIDEO
(option)
Second TV
1.
2.
Connect the PC cable from the monitor output socket of the PC
to the PC INPUT sockets of the set.
Connect the audio cable from the PC to the AUDIO sockets of
the set.
3.
Switch
on
set can be
the PC, and the PC screen appears
operated as the PC monitor.
the set. The
on
DVD/DTV INPUT
COMPONENT1
COMPONENT2
(480i/480p/576i)
PC(VGA)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
VIDEO
LR
(L)-AUDIO-(R)
VARIABLE
AUDIO OUTPUT
MONITOR
Note
a.
ANT IN
OUTPUT
LL
:
The cables
are
not
supplied,
such
as
the PC cable, audio cable
VIDEO
AV2
AV4
AV1
MONO
S-VIDEO
etc.
b.
Set the resolution of PC to VGA 640x480
(60 Hz)
video mode
to use this set as PC monitor.
PERSONAL COMPUTER
Displayable
MODE
Monitor
Specification (only)
Resolution
Horizontal
Frequency(KHz)
VGA
31.5KHz
640x480
(Synchronization input
form
:
Vertical
Frequency(Hz)
60Hz
separate)
31
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF