LG | RT-60SZ31RB | LG RT-60SZ31RB Owner’s Manual

LCD
PROJECTION TV
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0401A
(MB03CA,
100E
TX)
a
and quote this
require service.
cover
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Rear panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
On screen language selection (option)
8
On
9
screen menus
Menu selection
SETUP menu
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Calling the programme table
10
PICTURE
15
menu
PSM(Picture Status Memory)
Picture adjustment
AUDIO menu
SSM (Sound Status Memory)
AVL (Auto Volume Leveler) / Speaker adjustment
Balance adjustment / Equalizer (option)
Sound output selection / Stereo/Dual reception
NICAM reception
16
TIME
20
menu
Auto
sleep
/
Sleep
timer
SPECIAL menu
Main Picture Source Selection
Child Lock / Picture format
21
Picture in picture (PIP) function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture / Sub picture size
Sub picture freeze / Sub picture position change
23
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Connection of PC
PC in socket / RGB-PC mode
27
(option)
Connection of external equipment
Aerial socket
DVD input sockets
DTV input sockets
Monitor output sockets
Audio/Video input sockets (option)
S-Video/Audio input sockets (option)
Troubleshooting
2
check list
29
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
the ventilation
in
a position to allow a free flow
openings on the back cover.
of air. Do not
cover
Avoid having a fixed image remain on the screen for a long period
of time. Typically a frozen still picture from a VCR, 4:3 picture format or if a CH label is present;
the fixed image may remain visible on the screen.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
3
Location and function of controls
All the functions
Some functions
panel
can
can
be controlled with the remote control handset.
also be adjusted with the buttons on the front
of the set.
Remote control handset
Before you use the remote control handset,
teries. See the next page.
POWER
1
1.
MULTIMEDIA
TV/AV
2
MUTE
2.
SLEEP
3
PIP
TEXT
4
3.
PR-
PR+
SWAP
INPUT
5
MENU
PR
4.
CANCEL/EXIT
OK
VOL
7
PR
123
456
8
7
8
9
PSM
0
SSM
POSITION
SIZE
STILL
INDEX
TIME
REVEAL
5.
6.
MIX
I/II
MODE
M
?
7.
MUTE
switches the sound
LIST
11
RGB-DTV
1/2,
on or
off to
or
REC
RGB-PC modes.
off.
PIP BUTTONS
PIP
SWAP
MENU
selects
Δ / Ε
previously
viewed programme.
a menu.
(Programme Up/Down)
OK
REW
PLAY
FF
accepts your selection
8.
9.
or
NUMBER BUTTONS
switches the set on from
PSM (Picture Status
recalls your preferred
displays
standby
the current mode.
or
directly
language
11. VCR BUTTONS
control
a
select
a
number.
Memory)
picture setting.
10. I/II
selects the language during dual
selects the sound output.
4
or
standby.
Φ / Γ (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
ARC
P/STILL
standby
selects a programme or a menu item.
switches the set on from standby.
10
STOP
from
MULTIMEDIA
selects Component
returns to the
9
on
install the bat-
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
6
VOL
POWER
switches the set
please
LG video cassette recorder.
broadcast.
Location and function of controls
12. TV/AV
selects the remote
switches the set
13. SLEEP
sets the
sleep
on
operating mode.
from standby.
timer.
POWER
14. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
MULTIMEDIA
TV/AV
12
MUTE
13
15. CANCEL/EXIT
Clears all
on-screen
SLEEP
PIP
displays
and returns to TV
viewing
TEXT
14
from any
menu.
PR-
PR+
SWAP
16. SSM (Sound Status Memory)
recalls your preferred sound setting.
MENU
INPUT
PR
CANCEL/EXIT
15
17. LIST
displays
the programme table.
VOL
18. ARC
OK
VOL
Ratio
Control)
(Aspect
changes the picture format.
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
PR
Battery
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
SIZE
STILL
INDEX
TIME
REVEAL
MIX
MODE
installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
16
-
M
?
LIST
17
I/II
ARC
18
STOP
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
REW
P/STILL
PLAY
REC
FF
5
Location and function of controls
Front
panel
Lamp indicator, operation indicator, and temperature indicator,
trols reveal the operating status of the LCD projection TV.
located below the front
panel
con-
ON/OFF
TV/AV
TV/AV
2
10
MENU
MENU
OK
VOL
ON/OFF
PR
OK
34
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
TV/AV
selects the remote operating mode.
switches the set on from standby.
VOL
PR
5
6
789
1
7.
OPERATION INDICATOR
(Refer
8.
LAMP INDICATOR
to
9.
TEMPERATURE INDICATOR
(Refer
to
p.7)
p.7)
(Refer
to
p.7)
10. REMOTE CONTROL SENSOR
3.
MENU
selects
faint white trace on the
to the position.
This is normal and is a characteristic of the
Note
a menu.
:
There
might
be
center of the screen
4.
OK
accepts your selection
or
displays
the current
mode.
5.
6.
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
Δ / Ε
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6
screen.
a
according
Location and function of controls
Rear
panel
A/V 3
INPUT
S-VIDEO
S-VIDEO INPUT
SOCKET
VIDEO
L/MON
AV3 INPUT SOCKET
AUDIO
A/V3
NPUT
S-VDEO
V DEO
L/MON
R
AUDO
R
SIDEAV
SIDE A/V
NTN
L 5Ω
R1
DTV
(GA
48p
2p
10i
U
P
G
R
P
A
O
D
R
T
G12
Y
PB
PR
PDT
GA
48p
2p
10i
RB2
DTDD
4i48p2/1i)
ANT IN
L L 75Ω
PC/DTV INPUT
SOCKETS
AERIAL SOCKET
PC/DTV INPUT
UP
GRADE
UPGRADE PORT
This
port is used
upgrade
PO
RT
to
the software
RGB
576i/480i
576i/480i
(XGA/
576p/
480p/
720p/
1080i)
576p/480p
720p/
576p/480p
720p/
port. Just
your dealer
or
AV1/2 / MONITOR
OUT(AUDIO/VIDEO),
S-VIDEO INPUT
SOCKETS
S-VIDEO
PB
AUDIO
(R)
PR
hardware.
this
DTV/DVD INPUT
SOCKETS
1080i
Y
debug
changing the
Be careful not to
1080i
(L)
version and
without
COMPONENT COMPONENT
INPUT 1
INPUT 2
A/V 1
A/V 2
MONITOR
INPUT
INPUT
OUT
AUDIO
CENTER
use
MODE IN
contact
VAU
RI DIO
A
service
ABLE UT
O
centre.
(L)
(L)
AUDIO
AUDIO
(R)
(L)
AUDIO
MONO
(R)
(R)
DTV/DVD INPUT
VARIABLE AUDIO
CENTER SPEAKER
MODE IN SOCKETS
?Status
OUT SOCKETS
Indicators
Operation
Lamp
Indicator
Off
Power cord is not connected.
Red
Power Cord is connected, unit is
Green
On
Orange (flashing)
Orange
Preparing operation
Indicator
needs to be
Green
Temperature
Indicator
Projection lamp
(flashing)
The
lamp
is
in
cover
with
the end of its life and
a new
lamp.
is not closed.
Orange
The set is
Red
The set has shut down due to
Red
The set has shut down, check the
(flashing)
standby.
standby.
reaching
replaced
on
overheating.
overheating.
cooling
fan.
7
Basic
Operation
On and off
Before turning the set on, be sure that the main power switch
the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the POWER, Δ / Ε, TV/AV,
MULTIMEDIA or NUMBER button on the remote control handset to turn it on fully. The LED will blink orange for a while and
then lit up green when the power is successfully on.
To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode.
1.
on
2.
POWER
3.
TV/AV
MUTE
MENU
VOL
PR
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
SSM
Note :
a.
The lamp cooling fan will continue to spin for approximately 120
seconds after the power is turned off by the remote control
handset.
b.
Normally, don't push off the main power switch. Instead, use the
remote control to turn the power off.
c.
When the set is turned on again immediately after turning off, it
takes around 30 to 50 seconds for sufficient cooling.
d.
When the power is switched off using the main power switch on
the set, the internal cooling system also stops operating.
Therefore, power-on by main power switch takes around 30 to
50 seconds for sufficient cooling.
e.
Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a
short period of time.
f.
When the set is switched on, there might be a strange sound
from the set.
Programme
selection
You can select
buttons.
a
Volume
programme number with the Δ
/ Ε
or
NUMBER
adjustment
Press the Φ / Γ button to
adjust
the volume.
Quick view
Press the SWAP button to view the
I/II
last programme you
were
watching.
Mute function
Press the MUTE button. The sound is switched off and the
display
Mute
appears.
You can cancel it
On
screen
by pressing
language
selection
The menu can be displayed
First select your language.
1.
on
the
Γ, SSM, I/II button.
(option)
screen
Press the MENU button and then Δ
Special
2.
the MUTE, Φ /
in desired
language.
/ Ε button to select the
menu.
Press the
Γ
button
and
then
the
Δ
/ Ε
button
to
select
Language.
3.
4.
5.
Press the Γ button and then the Δ / Ε button to select your
desired language.
Press the OK or Φ button.
All the on screen displays will appear in the selected language.
Repeatedly press the MENU button to return to normal TV
viewing.
8
On Screen Menus
The
dialogue between you and your set takes place
required for the operating steps are also displayed.
on screen
with
an
operator
menu.
The buttons
Menu selection
1.
Press the MENU button and then Δ / Ε button to
2.
Press the Γ button and then the Δ / Ε button to select
3.
Repeatedly press
Note
:
On
some
display
each
a menu
the MENU button to return to normal TV
menu.
item.
viewing.
models, the Language will not display.
SETUP
Γ
Auto programme
PSM
SETUP
Manual programme
PICTURE
Programme
Contrast
PICTURE
PICTURE
edit
Γ
Brightness
Colour
AUDIO
AUDIO
AUDIO
AUDIO
TIME
TIME
SPECIAL
SPECIAL
SETUP
Sharpness
PICTURE
menu
menu
SSM
SETUP
AVL
PICTURE
PICTURE
Internal
speaker
Balance
AUDIO
AUDIO
Γ
Equalizer
TIME
SPECIAL
AUDIO
Main
SETUP
PIP
PICTURE
input
SETUP
input
Auto
sleep
Sleep
timer
menu
PICTURE
PICTURE
Child lock
ARC
AUDIO
AUDIO
AUDIO
Language
TIME
SPECIAL
TIME
Γ
Γ
SPECIAL
SPECIAL
menu
TIME
menu
9
SETUP Menu
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme
edit
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use the
Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
In
:
some
models up to 200 TV stations
Auto programme
AUDIO
can
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
TIME
1.
SPECIAL
SPECIAL
2.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Auto pro-
gramme.
3.
Press the Γ button to select
the Δ / Ε button;
SETUP
SETUP
System.
Auto programme
Manual programme
PICTURE
Programme
edit
Γ
Select
TV
a
System
Storage
system with
I
from
9
To start
AUDIO
AUDIO
TIME
MENU
PR
SPECIAL
SPECIAL
Φ Prev.
VOL
OK
VOL
4.
5.
PR
6.
1
2
3
4
5
6
7
8
9
BG
:
I
DK
:
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
: (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the Γ button to select Storage from. Select
ning programme number with the Δ / Ε button or
buttons on the Storage from menu.
the beginNUMBER
Press the Γ button to select To start.
Press the Γ button to begin auto programming.
SETUP
SETUP
PICTURE
0
AUDIO
AUDIO
Auto programme
System
Manual programme
Storage
Programme
Edit
I
from
To Start
9
Γ
Searching...
88%
15
TIME
SPECIAL
SPECIAL
MENU
To
Stop
programming, press the MENU button.
In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
lowed by a number see 'Assigning a station name' section to
assign the station name.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme Edit' section
to edit the stored programme.
Repeatedly Press the MENU button to return to normal TV
stop
auto
Option:
-----
7.
viewing.
10
SETUP Menu
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
SETUP
Γ
Auto programme
Manual programme
PICTURE
with five characters to each programme number.
Programme
edit
AUDIO
AUDIO
1.
Press the MENU button and then Δ
SETUP
/ Ε
button to select the
menu.
TIME
2.
Press the Γ button and then Δ
3.
programme.
Press the Γ button to
/ Ε
button to select Manual
SPECIAL
display
the Manual programme
menu.
SETUP
SETUP
PICTURE
Auto programme
System
Manual programmeΓ
Band
Programme
edit
AUDIO
AUDIO
BG
V/UHF
47
Channel
Search
Up/Down
Fine
Up/Down
Name
TIME
C5
Storage
10
Booster
Off
SPECIAL
SPECIAL
Φ Prev.
4.
Press the Γ button to select
the Δ
5.
BG
:
I
:
DK
:
M
:
System. Select
a
TV
button;
V/UHF
or
Cable
as
VOL
/ Ε
button to
required.
/
Ε button or NUMBER buttons. If
buttons.
PR
1
2
3
4
5
6
7
8
9
0
Press the Γ button to select Search. Press the Δ
commence
searching.
If this station is the
one
If
button
or
/
Ε button to
station is found the search will stop.
required, press the Φ / Γ button to select
a
Storage. Select
9.
VOL
possi-
ble, select the channel number(1 to 75) directly with the number
8.
OK
Press the Γ button to select Channel. Select the desired channel number with the Δ
7.
PR
system with
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Press the Γ button to select Band. Press the Δ
select
6.
/ Ε
MENU
the desired programme number with the Δ
NUMBER buttons.
/ Ε
Press the OK button to store it.
10. To store another station, repeat steps 4 to 9.
11. Repeatedly press the MENU button to return to normal TV
viewing.
11
SETUP Menu
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme
2.
3.
edit
4.
AUDIO
5.
6.
TIME
1 to 3.
Press the Γ button to select Name.
Press the Δ button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Γ button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
SPECIAL
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
MENU
the 'Manual programme tuning' steps 1 to 3.
Press the Φ / Γ button to select Booster.
Press the Δ / Ε button to select On or Off.
Repeatedly press the MENU button to return to normal TV
Repeat
viewing.
PR
Fine
VOL
OK
VOL
Normally
1.
2.
3.
PR
1
2
3
4
5
6
7
8
9
tuning
fine
tuning
is
only necessary
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Γ button to select Fine.
Press the Δ / Ε button to fine tune for the best picture and
sound.
Repeat
SETUP
SETUP
PICTURE
0
if
Auto programme
System
Manual programme
Band
Programme
Edit
AUDIO
Channel
47
Search
Up/Down
Fine
Up/Down
Name
TIME
BG
U/VHF
BLN 2
Storage
10
Booster
Off
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
12
Store
be indicated
by yellow
number
SETUP Menu
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select
Programme edit.
Press the Γ button to display the Programme edit menu.
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme
edit
AUDIO
AUDIO
TIME
SPECIAL
SPECIAL
C1
MENU
Prev.
1
0C1
1C4
4C1
5C6
6C3
7C1
8C7
9C1
10C2
11-----
12-----
13-----
14-----
15-----
16-----
17-----
18-----
19-----
20-----
21-----
22-----
23-----
24-----
25-----
26-----
27-----
28-----
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
Select
Delete
2C5
Copy
3S2
Move
Skip
Deleting a programme
1. SelectaprogrammetobedeletedwiththeΔ/ΕorΦ/Γbutton.
2.
MENU
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
all the
PR
following pro-
Copying a programme
1. SelectaprogrammetobecopiedwiththeΔ/ΕorΦ/Γbut-
VOL
OK
VOL
ton.
2.
3.
Press the GREEN button.
Move the programme to the desired programme number with the
PR
Δ/ΕorΦ/Γbutton.
4.
Press the GREEN button again to move the programme.
All the following programmes are shifted down one position.
Moving a programme
1. SelectaprogrammetobemovedwiththeΔ/ΕorΦ/Γbutton.
2.
3.
1
2
3
4
5
6
7
8
9
0
Press the YELLOW button.
Move the programme to the desired programme number with the
Δ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
SETUP Menu
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Displaying programme
C1
menu.
1
0C1
1C4
2C5
3S2
4C1
5C6
6C3
7C1
8C7
9C1
10C2
11-----
12-----
13-----
14-----
15-----
16-----
17-----
18-----
19-----
20-----
21-----
22-----
23-----
24-----
25-----
26-----
27-----
28-----
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
PR
LIST
VOL
OK
Exit
Select
VOL
Note :
a.
You may find some blue highlighted programmes shown. They
have been set up in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
The set switches to the chosen programme number.
Selecting
a programme table
3 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the Δ
/ Ε or Φ / Γ
button
repeatedly
turns the pages.
LIST
Press the LIST button to return to normal TV
14
viewing.
PICTURE Menu
PSM
1.
2.
3.
(Picture Status Memory)
Press the MENU button and then Δ / Ε button to select the PICTURE menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu.
SETUP
SETUP
PSM
Γ
PSM
SETUP
SETUP
Contrast
PICTURE
Γ
Brightness
Colour
AUDIO
Sharpness
Dynamic
TIME
Contrast
PICTURE
AUDIO
Standard
Brightness
Mild
Colour
Game
Sharpness
User
SPECIAL
SPECIAL
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK
Repeatedly
viewing.
Picture
You
2.
3.
button.
press the MENU button to return to normal TV
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
MENU
PR
can
ness
1.
or Φ
Press the MENU button
TURE menu.
Press the Γ button and
picture item.
Press the Γ button and
adjustments, then it will
button to select the PIC-
and then Δ
/ Ε
then Δ
button to select the desired
/ Ε
VOL
then Φ / Γ button to make appropriate
be stored for the picture User.
OK
VOL
PR
SETUP
SETUP
Contrast
100Φ
Γ
PICTURE
AUDIO
PSM
TIME
SPECIAL
SPECIAL
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
15
AUDIO MENU
SSM
You
SSM
SETUP
SETUP
Internal
speaker
Γ
preferred sound setting; Dolby Virtual, Flat,
Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change proor
grammes.
Balance
AUDIO
select your
Music, Movie,
AVL
PICTURE
(Sound Status Memory)
can
1.
Equalizer
2.
3.
TIME
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
SPECIAL
SETUP
SETUP
SSM
Γ
PICTURE
AUDIO
Internal
Dolby
Virtual
Flat
AVL
Music
speaker
Balance
Movie
Equalizer
Speech
User
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
MENU
VOL
PR
OK
Press the OK
Repeatedly
viewing.
or
Φ button.
press the MENU button to return to normal TV
Dolby Virtual
Dolby Virtual lets
you
experience panoramic
effects of sound.
To recall your
desired sound
VOL
preferred setting, press the SSM button until the
(Dolby Virtual, Flat, Music, Movie, Speech or
User) appears. The sound Dolby Virtual, Flat, Music, Movie
and Speech are programmed for good sound reproduction at the
factory and cannot be changed.
If you press the SSM button after making appropriate adjustthe Equalizer sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual, Flat, Music, Movie or Speech.
PR
Note
:
ment
on
AVL
(Auto Volume Leveler)
If you select AVL On, the set automatically
ume level even if you change programmes.
SSM
1.
2.
3.
keeps
on an
equal
vol-
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select AVL.
Press the Γ button and then Δ / Ε button to select On or Off
on the AVL pull-down menu.
SETUP
SETUP
SSM
AVL
PICTURE
PICTURE
Internal
Γ
speaker
Off
On
Balance
AUDIO
AUDIO
Equalizer
TIME
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
16
Press the OK
Repeatedly
viewing.
or
Φ button.
press the MENU button to return to normal TV
AUDIO MENU
Speaker adjustment
You
1.
2.
3.
can
adjust
internal
speaker
status.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Internal
PICTURE
speaker.
AUDIO
Press the Γ button and then Δ / Ε button to select On, Center
or Off on the Internal speaker pull-down menu.
SETUP
SETUP
SSM
SETUP
SSM
AVL
Internal
speaker
Balance
Γ
Equalizer
TIME
SPECIAL
AVL
PICTURE
Internal
speaker
Γ
AUDIO
On
Center
Balance
Off
Equalizer
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note :
a.
Allows you to toggle the TV internal speakers On, Center or
Off. If you want to use your external hi-fi stereo system, turn off
the internal TV speakers. However, you may use the internal
TV speakers as a center speaker to create a surround effect.
b. Center speaker is not available in TV for main source.
In RGB-PC/DTV mode, internal speaker/variable audio can be
c.
output even though there is no video signal.
MENU
VOL
PR
OK
VOL
PR
Balance
You
1.
2.
3.
can
adjustment
adjust
balance.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Balance.
Press the Γ button.
SETUP
SETUP
Balance
0Φ
Γ
PICTURE
AUDIO
TIME
SPECIAL
SPECIAL
4.
Make desired
pull-down
5.
6.
adjustment
with the Φ / Γ button
on
the Balance
menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
17
AUDIO MENU
Equalizer (option)
1.
SSM
SETUP
SETUP
AVL
PICTURE
Internal
speaker
Balance
AUDIO
Γ
2.
3.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Equalizer.
Press the Γ button in Equalizer to display the Equalizer sub
menu.
Equalizer
SETUP
SETUP
TIME
SSM
AVL
PICTURE
PICTURE
Internal
speaker
SPECIAL
Balance
AUDIO
AUDIO
Equalizer
TIME
TIME
120 500
1.5k
5k
10k
(Hz)
SPECIAL
SPECIAL
Φ Prev.
4.
5.
6.
7.
Select a sound band by pressing the Φ / Γ button.
Make appropriate sound level with the Δ / Ε button.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
VOL
PR
OK
Sound output selection
In AV mode, you
VOL
I/II
18
select output sound for the left and
right
loud-
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
PR
can
speakers.
AUDIO MENU
Stereo/Dual
reception
When
a programme is selected, the sound information for the station
appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
mono
selection for dual
Language
If
language
broadcast
PR
VOL
OK
VOL
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II buta
ton
repeatedly.
DUAL I sends the
primary broadcast language to the loudspeakers.
secondary broadcast language to the loud-
PR
DUAL II sends the
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is
equipped
with the receiver for NICAM
NICAM
Instantaneous
high quality
Multiplex) digital
sound
(Near
can
reception, the
Companding Audio
be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
NICAM
When
MONO
2.
When
or
mono
is
received, you
can
I/II
select NICAM
FM MONO.
NICAM stereo is received, you can select NICAM
or FM MONO. If the stereo signal is weak, switch to
STEREO
FM
3.
mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO.
19
TIME MENU
Auto
SETUP
SETUP
Auto
sleep
Sleep
timer
1.
PICTURE
2.
3.
AUDIO
TIME
sleep
If there is
minutes.
no
input signal,
the set will turn off
automatically
after 10
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off.
Γ
SETUP
SETUP
SPECIAL
Auto
sleep
Sleep
timer
Γ
Off
On
PICTURE
AUDIO
AUDIO
TIME
TV/AV
SPECIAL
SPECIAL
Φ Prev.
SLEEP
4.
5.
Press the OK
Sleep
MENU
VOL
button.
the MENU button to return to normal TV
timer
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
PR
OK
or Φ
Repeatedly press
viewing.
1.
VOL
2.
3.
4.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Sleep timer.
Press the Γ button and then Δ / Ε button to select a timer setting on the Sleep timer pull-down menu.
Press the OK or Φ button.
PR
1
2
Auto
SETUP
3
sleep
Sleep timer
4
5
6
7
8
9
PICTURE
Off
Γ
10 Min
20 Min
30 Min
60 Min
AUDIO
AUDIO
0
90 Min
120 Min
TIME
180 Min
240 Min
SPECIAL
Φ Prev.
5.
Repeatedly press
viewing.
the MENU button to return to normal TV
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, 120,
180 and 240. The timer begins to count down from the number of
minutes selected.
play
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display Off appears.
c.
When you switch the set off, the set releases the preset sleep time.
20
SPECIAL MENU
Main Picture Source Selection
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when
or
other
equipment
a
video
is connected to the set.
Main
SETUP
PIP
PICTURE
input
input
Child lock
ARC
Note
:
When
a
VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external
AUDIO
Language
equipment' section.
TIME
1.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
2.
Press the Γ button and then Δ / Ε button to select Main
3.
Press the Γ button and then Δ / Ε button to select TV, AV1,
AV2, AV3, Component1, Component2, RGB-DTV or RGB-
SPECIAL
Γ
input.
PC.
Main
SETUP
SETUP
PIP
PICTURE
input
Γ
TV
AV1
input
AV2
Child lock
AV3
ARC
AUDIO
AUDIO
Component1
Language
Component2
RGB-DTV
TIME
RGB-PC
MENU
PR
SPECIAL
SPECIAL
Φ Prev.
AV1
:
VCR connected to the AV1 INPUT sockets of the set
AV2
:
VCR connected to the AV2 INPUT sockets of the set
AV3
:
VCR connected to the AV3 INPUT sockets of the set
Component1/2
:
DVD
or
DTV/DVD INPUT sockets
RGB-DTV
:
sockets
the back of set
on
RGB-PC
:
SET-TOP
on
Box
connected
to
VOL
OK
VOL
the
the back of set
PR
SET TOP Box connected to the PC/DTV INPUT
PC connected to the PC/DTV INPUT sockets
on
the
1
2
3
4
5
6
7
8
9
back of set
or Φ
4.
Press the OK
5.
Repeatedly press
viewing.
Alternatively you
can
button.
the MENU button to return to normal TV
select the TV
or
AV mode
by pressing
0
the
TV/AV button.
In AV mode, to return to TV mode, press the Δ / Ε
or
NUMBER but-
tons.
21
SPECIAL MENU
Child Lock
Main
SETUP
SETUP
PIP
PICTURE
input
input
The TV
can
be set
that the remote control handset is needed to
so
control it. This feature
can
be used to
prevent unauthorized view-
ing.
Child lock
Press the MENU button and then Δ
1.
ARC
AUDIO
SPECIAL
Language
/ Ε button to select the
menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off.
2.
3.
TIME
SETUP
SPECIAL
Γ
Main
PIP
PICTURE
input
input
Child lock
Γ
ARC
AUDIO
AUDIO
Off
On
Language
TIME
SPECIAL
Φ Prev.
4.
Repeatedly
viewing.
press the MENU button to return to normal TV
With the lock on, the display Child lock On appears on the screen
if any button on the front panel is pressed while viewing the TV.
MENU
PR
Note : The
any button
display
on
Child lock On will not appear
front panel is pressed while
the
on
the
screen
displaying
if
the
menus.
VOL
OK
VOL
Picture format
You
can
watch TV in various
16:9
picture formats; Auto, 4:3,
(Wide)
and Zoom.
You
PR
can
repeatedly
press the ARC button to select your desired
pic-
ture format.
Auto
When your TV receives the wide screen signal (WSS), it will be automatically changed to the picture format to be sent.
4:3
Following
4:3
selection will lead you to view
picture
a
aspect ratio, with black bars appearing
with
an
original
right
at both the left and
sides.
16:9
Following selection will lead you to adjust the picture horizontally, in
linear proportion, to fill the entire screen (useful for viewing 4:3
formatted DVDs).
a
ARC
Zoom
Following
selection will lead you to view the
alternation, while filling the entire
tom
portions
screen
Note
:
up
You
RGB-DTV
22
or
of the
picture
screen.
will be
picture
without any
However, the top and bot-
cropped.
You
can
move
the
down with Δ / Ε button.
are
available to 4:3 and 16:9 in
(720p/1080i)
Component (720p/1080i),
and RGB-PC mode.
Picture In Picture
Option :
PIP (Picture
in
Picture) displays
a
picture
within
a
(PIP) Function
picture.
On and off
Press the PIP button to switch on the sub picture.
Press CANCEL/EXIT button to switch it off.
Each press of PIP button button changes the screen
shown below.
display
as
PIP
PR-
Note
ture
: When the sub picture
quality might get poor.
Input
size is 1/2 of the main
the
picture,
pic-
PR+
SWAP
INPUT
PR
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
displayed as shown below.
mode for the sub
input
picture.
mode for the sub
VOL
OK
VOL
pic-
ture is
Programme
number
AV1
PR
AV2
AV3
Note :When the PIP function is switched on, you
in the Special menu.
Swapping
between main and sub
Press the SWAP button to
Note : When the main
available.
Programme
is TV
also
or
selection for sub
AV
adjust
it
pictures
the main and sub
exchange
picture
can
pictures.
POSITION
SIZE
STILL
modes, the swapping is
picture
The sub picture programme selection is available when the sub picture is TV mode. Press the PR +/- buttons to select a programme
for the sub picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
position
is
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television proshare
grammes,
prices and many other topics.
Teletext is
a
up-to-the-minute
TV/AV
TEXT
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
PR
VOL
OK
VOL
PR
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
1
2
3
4
5
6
7
8
9
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
0
1.
M
2.
lowing page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro-
easily
3.
4.
24
gramme.
Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now on,
you can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
The
user
(option)
(option)
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with auto-
TV/AV
matic overflow to the next block.
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
Alternatively
4.
The
red
the Δ button
button
Alternatively
can
to
permits
the Ε button
can
existing
be used.
return
to
previous
selection.
PR
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
VOL
OK
VOL
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
1
2
3
4
5
6
7
8
9
0
Page
1.
selection
Press the
i
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
2.
You
3.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
4.
The Δ / Ε button
can
along
the bot-
INDEX
buttons in FASTEXT mode.
can
be used to select the
preceding
or
fol-
lowing page.
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
VOL
OK
Displays
VOL
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will
display
change
to the page number.
Press this button to view the
PR
1
2
3
HOLD
4
5
6
Stops
7
8
the automatic page
updated
change
teletext page.
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
9
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
0
?
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button
again.
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
:
picture off press this button again.
When TV and text picture are displayed half and half
of the screen, MIX function is not available.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, Δ / Ε
NUMBER buttons.
change
Press this button
26
again
to exit this function.
or
Connection of PC
PC in socket
1.
Connect the
cable from the monitor output socket of the
input socket of the set.
signal
ANT IN
L L 75Ω
PERSONAL COMPUTER to the PC
PC/DTV INPUT
COMPONENT COMPONENT
INPUT 1
INPUT 2
U
2.
Connect the audio cable from the PC to the PC/DTV INPUT
AUDIO sockets
G
R
A
D
E
P
O
the back of the set.
on
P
RGB
576i/480i
(XGA/
576p/
480p/
720p/
1080i)
576p/480p
720p/
Press the TV/AV
or
576i/480i
576p/480p
720p/
1080i
Y
T
(L)
AUDIO
3.
1080i
R
MULTIMEDIA button to select RGB-PC.
S-VIDEO
PB
(R)
PR
A/V 1
A/V 2
MONITOR
INPUT
INPUT
OUT
AUDIO
CENTER
MODE IN
4.
Switch
the PC, and the PC screen appears
The set can be operated as the PC monitor.
Note
a.
on
on
the set.
U
D
IO
O
U
T
(L)
AUDIO
AUDIO
(R)
(L)
AUDIO
MONO
(R)
(R)
DTV/DVD INPUT
:
Connect PC to the PC
input
sockets of the set after
changing
the resolution of PC.
b.
(L)
VA
A
R
I
A
B
L
E
If you want to watch the PC monitor
the POWER button
only,
the remote control handset.
on
switch off the set with the ON/OFF button
of the PC isn't
Displayable
MODE
switch off the set with
on
VGA
(If
you
screen
displayed.)
Monitor
Specification
Resolution
Horizontal
Frequency(KHz)
EGA
the set, the
PERSONAL COMPUTER
Vertical
Frequency(Hz)
640x350
31.468
70.09
640x480
31.469
59.94
640x480
37.861
72.80
640x480
37.500
75.00
800x600
35.156
56.25
800x600
37.879
60.31
800x600
48.077
72.18
SVGA
XGA
800x600
46.875
75.00
1024x768
48.363
60.00
1024x768
56.476
70.06
1024x768
60.023
75.02
(Synchronization input
form
:
separate)
27
Connection of PC
RGB-PC Mode
Main
SETUP
SETUP
PIP
PICTURE
input
1.
iInput
ARC
AUDIO
Press the MENU button and then Δ / Ε button to select the
SPECIAL
Child lock
Language
(option)
menu.
2.
Press the Γ button and then Δ / Ε button to select Main
3.
Press the Γ button and then Δ / Ε button to select RGB-PC.
RGB-PC
Input.
Adjust
TIME
SPECIAL
H-Position
0
V-Position
0
H-Size
0
Γ
V-Size
0
Phase
-15
ΔΕ Select
4.
picture
appropriate adjustments.
adjust picture
to
left/right
and
up/down
as
you
prefer.
PR
H-Size
OK
button to select the
/ V-Position
This function is to
VOL
/ Ε
item.
Press the Φ / Γ button to make
H-Position
MENU
Exit
Adjust
Press the OK button and then Δ
desired
5.
ΦΓ
/ V-Size
This function is to
VOL
you
adjust picture
size to
enlarges
or
reduces
as
prefer.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
PR
1
2
3
4
5
6
7
8
9
Note
tion
:
Some
properly.
tor's position,
signal from
some
If the results
are
size
graphics boards may not funcunsatisfactory, adjust your moniand phase manually.
0
6.
28
Press the OK button to store it for the PC monitor
picture.
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
ANT IN
etc. to your set.
L L 75Ω
PC/DTV INPUT
Here shown may be somewhat different from your set.
COMPONENT COMPONENT
INPUT 1
Aerial socket
UP
RGB
GRADE
(XGA/
576p/
480p/
720p/
PO
RT
1080i)
INPUT 2
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
Y
(L)
S-VIDEO
PB
AUDIO
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
1.
Connect the RF out socket of the VCR to the aerial socket
VA
AU
on
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
4.
(L)
RI DIO
(L)
AUDIO
AUDIO
A
BO
L U
E T
the back of the set.
2.
(L)
AUDIO
(R)
DTV/DVD INPUT
VCR
stored.
5.
MONO
(R)
(R)
ANT IN
L L 75Ω
Press the PLAY button
on
the VCR.
PC/DTV INPUT
COMPONENT COMPONENT
INPUT 1
INPUT 2
U
P
G
RGB
(XGA/
576p/
480p/
720p/
R
A
D
E
P
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
1080i)
ORT
Y
(L)
DVD
input
sockets
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
(L)
VA
AU
D
1.
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the DTV/DVD INPUT sockets (Y PB
2.
Connect the audio cable from the DVD to DTV/DVD INPUT
PR)
S-VIDEO
PB
AUDIO
RI IO
A
BO
L U
ET
(L)
AUDIO
AUDIO
R)
(L)
MONO
AUDIO
(R)
(R)
DTV/DVD INPUT
of the set.
DVD
AUDIO sockets of the set.
3.
Press
the
TV/AV
or
MULTIMEDIA
button
to
select
ANT IN
Component
4.
1
or
L L 75Ω
Component 2.
Press the PLAY button
on
PC/DTV INPUT
INPUT 1
the DVD.
PG
RGB
(XGA/
576p/
480p/
720p/
R
A
D
E
The DVD
playback picture appears
COMPONENT COMPONENT
INPUT 2
U
on
the
P
O
screen.
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
1080i)
RT
Y
(L)
S-VIDEO
PB
AUDIO
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
VA
A U
DTV
1.
RI DI
sockets
input
A O
B O
L U
E T
(L)
(L)
AUDIO
AUDIO
(R)
(L)
MONO
AUDIO
(R)
(R)
DTV/DVD INPUT
Connect the SET TOP
(Y
PB
PR)
of the set.
inputs to the DTV/DVD INPUT sockets
(or, connect the HD-SET TOP with the D-
SET TOP
Box
Sub output socket to PC/DTV INPUT socket on the set and
audio cable of the HD-SET TOP to the AUDIO sockets of
PC/DTV
2.
INPUT.)
ANT IN
L L 75Ω
Connect the audio cable from the SET TOP to the DTV/DVD
PC/DTV INPUT
U
RGB
PG
(XGA/
R
A
D
E
INPUT AUDIO sockets of the set.
COMPONENT COMPONENT
INPUT 1
INPUT 2
576p/
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
480p/
720p/
P
O
1080
)
RT
3.
Press
the
TV/AV
or
MULTIMEDIA
button
to
Y
select
(L)
PB
AUDIO
S-VIDEO
(R)
A/V 1
A/V 2
MONITOR
INPUT
INPUT
OUT
PR
AUDIO
Component 1, Component 2
or
RGB-DTV.
CENTER
MODE IN
VA
A U
RI DI
A O
B O
L U
E T
Monitor
output sockets
Connect the audio/video in sockets of the other TV
(L)
(L)
AUDIO
AUDIO
(R)
(R)
(L)
AUDIO
MONO
(R)
DTV/DVD INPUT
SET TOP
or
Box
monitor to
MONITOR OUTPUT sockets of the set.
ANT IN
L L 75Ω
PC/DTV INPUT
COMPONENT COMPONENT
INPUT 1
U
P
G
R
A
D
E
P
O
RGB
(XGA/
576p/
480p/
720p/
INPUT 2
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
1080i)
RT
Y
(L)
AUDIO
S-VIDEO
PB
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
VA
A U
RI DIO
A
B O
L U
E T
(L)
(L)
AUDIO
AUDIO
(R)
(L)
AUDIO
MONO
(R)
(R)
DTV/DVD INPUT
Second TV
29
Connection of external
Audio/Video
input
ANT IN
L L 75Ω
PC/DTV INPUT
RGB
(XGA/
576p/
480p/
720p/
RADE
P
sockets
(option)
COMPONENT COMPONENT
INPUT 1
UPG
equipment
INPUT 2
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
1080i
1.
Connect the audio/video out sockets of the VCR to audio/video
1080i)
O
R
T
in sockets of the set.
Y
(L)
S-VIDEO
PB
AUDIO
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
VA
A U
R
I
A O
DI
BL
E
O
2.
(L)
(L)
(L)
AUDIO
AUDIO
(R)
AUD O
3.
MONO
(R)
(R)
U
T
DTV/DVD INPUT
Press the TV/AV button to select AV1, AV2
Press the PLAY button on the VCR.
The VCR
VCR
playback picture appears
on
the
or
AV3.
screen.
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
A/V 3
INPUT
S-Video / Audio
S-VIDEO
input
sockets
(option)
VIDEO
L/MON
When
AUDIO
ity
R
connecting an VCR to
improved.
the S-VIDEO socket, the
picture qual
will be further
SIDE A/V
1.
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
VCR
2.
Connect the audio cable from the VCR to the AUDIO sockets of
the A/V2 INPUT
ANT IN
LL 75Ω
PC/DTV INPUT
G
R
A
DE
PORT
RGB
(XGA/
576p/
480p/
720p/
INPUT 2
576i/480i
576i/480i
576p/480p
720p/
576p/480p
720p/
1080i
4.
Press the PLAY button
or
AV3
by pressing
on
the TV/AV button
repeatedly.
the VCR.
playback picture appears
on
the
screen.
1080i
1080i)
Y
(L)
S-VIDEO
PB
AUDIO
(R)
A/V 1
INPUT
PR
A/V 2
INPUT
AUDIO
CENTER
MODE IN
VA
A U
RI DIO
A
B O
L U
E T
(L)
(L)
AUDIO
AUDIO
(R)
AUDIO
(R)
(R)
DTV/DVD INPUT
A/V 3
INPUT
S-VIDEO
VIDEO
L/MON
AUDIO
R
SIDE A/V
VCR
MONITOR
OUT
Note
:
If both S-VIDEO and VIDEO sockets have been connected
to the VCR
(L)
VCR
30
A/V3.
Select AV2
The VCR
COMPONENT COMPONENT
INPUT 1
UP
or
3.
MONO
simultaneously, only
the S-VIDEO
can
be received.
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Check these items and try to
adjust these
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
change
provider(s)
in ambient
ture may result in
(VCR only)
humidity
or
tempera-
unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
an
31
Download PDF