LG | V-KC881HT | LG V-KC881HT Owner’s Manual

Model
V-KC801H*** / V-KC881H***
Language
영어
Part No.
MFL37895405
Page
20
인쇄도수(외/내)
2/2
모조지 100g
크
190*260
2008.03.21
담 당 자
재
질
작성일자
기(D*W)
김 종 훈
OWNER'S MANUAL
V-KC801H***
V-KC881H***
New Type Cyclone Vacuum Cleaner
This information contains important instructions for the safe use and maintenance of the vacuum cleaner.
Especially, please read all of the information on page 4,5 for your safety.
Please keep this manual in an easily accessible place and refer to it anytime.
2
Table of contents
Important safety instructions ..............................................................................4~5
How to use .................................................................................................................6
Assembling vacuum cleaner....................................................................................................................6
Operating vacuum cleaner.......................................................................................................................8
Using carpet and floor nozzle ..................................................................................................................9
Using All floor nozzle and mini turbine nozzle .......................................................................................10
Using accessory nozzles .......................................................................................................................11
Emptying dust tank ................................................................................................................................12
Cleaning dust tank .................................................................................................................................13
Cleaning air filter and motor safety filter ................................................................................................14
Cleaning exhaust filter ...........................................................................................................................15
What to do if your vacuum cleaner does not work ..............................................16
What to do when suction performance decreases ..............................................16
3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire,electric shock, personal injury,or
damage when using the vacuum cleaner.This guide do not cover all possible conditions that may occur.Always contact your
service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC
Directives :-73/23/EEC,93/68/EEC-Low Voltage Directive–89/336EEC –EMC Directive.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”
These words mean:
WARNING
This symbol will alert you to hazards or unsafe practices which could cause serious
bodily harm or death.
CAUTION
This symbol will alert you to hazards or unsafe practices which could
cause bodily injury or property damage.
WARNING
• Do not plug in if control knob is not in OFF position.
Personal injury or product damage could result.
• Keep children away and beware of obstructions
when rewinding the cord to prevent personal injury
The cord moves rapidly when rewinding.
• Disconnect electrical supply before servicing or
cleaning the unit or when cleaner is not in use.
Failure to do so could result in electrical shock or personal
injury.
• Do not use vacuum cleaner to pick up anything that
is burning or smoking such as cigarettes, or hot
ashes.
Doing so could result in death, fire or electrical shock.
• Do not vacuum flammable or explosive substances
such as gasoline, benzene, thinners, propane
(liquids or gases).
The fumes from these substances can create a fire hazard
or explosion. Doing so could result in death or personal
injury.
• Do not handle plug or vacuum cleaner with wet
hands.
Doing so could result in death or electrical shock.
• Do not unplug by pulling on cord.
Doing so could result in product damage or electrical shock.
To unplug, grasp the plug, not the cord.
• Keep hair, loose clothing, fingers, and all parts of
the body away from openings and moving parts.
Failure to do so could result in electrical shock or personal
injury.
• Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run vacuum cleaner over
cord. Keep cord away from heated surfaces.
Failure to do so could result in electrical shock or personal
injury or fire or product damage.
• The hose contains electrical wires. Do not use it if it
is damaged, cut or punctured.
Failure to do so could result in death,or electrical shock.
4
• Do not allow to be used as toy. Close attention is
necessary when used by or near children.
Personal injury or product damage could result.
• Do not use the vacuum cleaner if the power cord or
plug is damaged or faulty.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use vacuum cleaner if it has been under water.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not continue to vacuum if any parts appear
missing or damaged.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use an extension cord with this vacuum
cleaner
Fire hazard or product damage could result.
• Using proper voltage.
Using improper voltage may result in damage to the motor
and possible injury to the user. Proper voltage is listed on
the bottom of vacuum cleaner.
• Turn off all controls before unplugging.
Failure to do so could result in electrical shock or personal injury.
• Do not change the plug in any way.
Failure to do so could result in electrical shock or personal
injury or product damage. Doing so result in death. If plug
does not fit, contact a qualified electrician to install the
proper outlet.
• Repairs to electrical appliances may only be
performed by qualified service engineers.
Improper repairs may lead to serious hazards for the user.
• Do not put fingers near the gear.
Failure to do so could result in personal injury.
gear
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
• Do not put any objects into openings.
Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free of
dust, lint, hair, and anything that may reduce air
flow.
Failure to do so could result in product damage.
• Do not use vacuum cleaner without dust tank and/or
filters in place.
Failure to do so could result in product damage.
• Always clean the dust bin after vacuuming carpet
cleaners or fresheners, powders and fine dust.
These products clog the filters,reduce airflow and can cause
damage to the cleaner. Failure to clean the dust bin could
cause permanent damage to the cleaner.
• Do not use vacuum cleaner to pick up sharp hard
objects, small toys, pins, paper clips, etc.
They may damage the cleaner or dust bin.
• Store the vacuum cleaner indoors.
Put the vacuum cleaner away after use to prevent tripping
over it.
• The vacuum cleaner is not intended to use by young
children or infirm people without supervision.
Failure to do so could result in personal injury or product
damage.
• Only use parts produced or recommended by LG
Electronics Service Agents.
Failure to do so could result in product damage.
• Use accessory nozzles in sofa mode.
Failure to do so could result in product damage.
• Don ’t grasp the tank handle when you are moving
the vacuum cleaner.
The vacuum cleaner’s body may fall when separating tank
and body. Personal injury or product damage could result.
You should grasp the carrier handle when you are
moving the vacuum cleaner.
• If after emptying the dust tank the indicator light is
on(red), clean the dust tank.
Failure to do so could result in product damage.
• Make sure the filters (exhaust filter and motor safety
filter) are completely dry before replacing in the
machine.
Failure to do so could result in product damage.
• Do not dry the filter in an oven or microwave.
Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer.
Failure to do so could result in fire hazard.
• Do not dry near an open flame.
Failure to do so could result in fire hazard.
• Do not push or pull the lever on the vacuum cleaner
If the lever is damaged, the vacuum cleaner may not work
properly and indicator light may flash red and alarm may
sound although dust tank is not full. In this case, contact LG
Electronics Service Agent
<Do not push or pull the lever>
• Use only as described in this manual. Use only with
LG recommended or approved attachments and
accessories.
Failure to do so could result in personal injury or product
damage.
lever
• To avoid personal injury and to prevent the machine
from falling when cleaning stairs, always place it at
the bottom of stairs.
Failure to do so could result in personal injury or product
damage.
Thermal protector :
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor
overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.
Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or
clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use
the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.
If the vacuum cleaner still does not run, contact a qualified electrician.
5
How to use Assembling Vacuum cleaner
Hose handle
2
Spring latch
Telescopic pipe
1
(depend on model)
6
Carpet and floor nozzle (depend on model)
Telescopic pipe
Push the nozzle into the telescopic pipe.
• Push telescopic pipe firmly into hose handle.
• Grasp the spring latch to expand.
• Pull out the pipe to desired length.
Click!
b
Fitting pipe
Flexible hose
Button
3
Attachment Point
Connecting the hose to the vacuum cleaner
Push the fitting pipe on the flexible hose
into the attachment point on the vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press the button situated on the fitting pipe,
then pull the fitting pipe out of the vacuum cleaner.
7
How to use Operating vacuum cleaner
1
2
3
Indicator
Plug
Cord reel
button
Control knob
alarm
sound
POWER
CONTROL
FLOOR
CARPET
SOFA
MAX
CURTAIN
OFF
MIN
How to operate
Indicator and alarm sound
Park mode
• Pull out the power cord to the
desired length and plug into
the socket.
• Place the control knob of the
hose handle to the required
position.
• To turn off, slide control knob
to OFF position.
• Press the cord reel button to
rewind the power cord after
use.
• The indicator light of the hose
handle is on and alarm will
sound when dust tank is full.
After about 2 minutes, vacuum
cleaner will turn itself off and
alarm will sound.
Empty the dust tank and reuse
the vacuum cleaner
• To store during
vacuuming, for example to
move a small piece of
furniture or a rug, use park
mode to support the
flexible hose and nozzle.
- Slide the hook on the
nozzle into the slot on the
side of vacuum cleaner.
NOTICE
When indicator light flashes and alarm sounds :
1. Dust tank is full
slide handle knob to OFF position and empty dust tank
2. Power is on without dust tank
slide handle knob to OFF position and reattach dust tank
3. Rotating plate in the dust tank is restricted because of obstruction
slide handle knob to OFF position and remove obstruction
8
How to use Using carpet and floor nozzle
1
Carpet
• Cleaning carpet and floor nozzle
Pedal
Floor
Carpet and floor nozzle (depend on model)
• The 2 position nozzle
This is equipped with a pedal which allows you to
alter its position according to the type of floor to
be cleaned.
• Carpet or rug position
press the pedal (
) to lower brush.
• Hard floor position (tiles, parquets floor)
Both pedal position are suitable.
• Open the cover by pulling the hook.
• Separate the nozzle into two parts
• Clean the hole of the nozzle.
9
How to use Using All Floor nozzle and mini turbine nozzle
2
Carpet
3
Pedal
Floor
Press
All Floor nozzle (depend on model)
Mini turbine nozzle (depend on model)
• The 2 position nozzle
This is equipped with a pedal which allows you to alter
its position according to the type of floor to be cleaned.
• Carpet or rug position
Press the pedal ( ), then brush is will rotate
• Hard floor position
Press the pedal ( ), then brush will stop rotating
• Mini turbine is used for stairs and other hard to
reach places.
• To clean the mini turbine nozzle, remove the
nozzle cover :
Remove 2 screws on the bottom and take mini
turbine nozzle cover off as shown.
• Frequently clean and remove hair, string, and lint
build-up in the brush area. Failure to do so could
damage to mini turbine nozzle.
• Cleaning All Floor nozzle
• Open the cover by
pulling the hook.
• Clean the hole and
brush of the nozzle.
10
How to use Using accessory nozzles
Upholstery nozzle
4
Dusting brush
Crevice tool
5
6
Upholstery nozzle
Dusting brush
Crevice tool
Upholstery nozzle is for
vacuuming upholstery,
mattresses etc.
Dusting brush is for vacuuming
picture frames, furniture frames,
books and other irregular
surfaces.
Crevice tool is for vacuuming in
those normally hard-to-reach places
such as reaching cobwebs or
between the cushions of a sofa.
NOTICE
Pull the
cover
Push the
button
Use accessory in the sofa mode
POWER
CONTROL
FLOOR
CARPET
SOFA
CURTAIN
OFF
Upholstery nozzle mode
Dusting brush mode
• BOX •
• Accessory nozzles included in the
"PE BAG" with owner's manual.
11
How to use Emptying dust tank
Indicator
Tank Separation lever
Pull out
Tank handle
The dust tank needs emptying when indicator light is on.
• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank
separation lever.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as below
Assembling dust tank
First, place the bottom of dust tank on the vacuum cleaner
and tilt.
NOTICE
• If suction power decreases after empting dust tank, clean
dust tank
Next page
• Since dust tank is full, indicator continues to flash for
1 minute and suction power will decrease for a while,
then vacuum cleaner will turn itself off.
Moving the vacuum cleaner
• Don't grasp the tank handle when you are moving the vacuum cleaner.
The vacuum cleaner's body may fall when separating tank and body.
You should grasp the carrier handle when you are moving the vacuum cleaner.
Tank handle
12
Carrier handle
How to use Cleaning dust tank
Dust tank cap
Carpet
Inner tank
Tank separation lever
Pull out
Floor
Dust tank
Tank handle
• Push the tank separation lever and hold while pulling out the
dust tank.
• Take the top off.
• Turn and remove the inner tank and empty the dust out of the
inner tank.
• Wash the dust tank and the inner tank.
• Dry those completely in the shade.
Assembling the air guide & the inner tank
• Line up on the inner tank with the cap turn to the
right to close.
NOTICE
If suction power decreases after cleaning dust tank,
clean air filter and motor safety filter.
Next page
13
How to use Cleaning air filter and motor safety filter
Air filter
Motor safety filter
• Push the cover lever and open the filter cover.
• Take out the motor safety filter.
• Take out the air filter from the motor safety filter.
• Run water on the motor safety filer and the air filter.
• Remove the water from the air filter by squeezing the air filter.
• Dry those completely in the shade.
14
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service Agent.
How to use Cleaning exhaust filter
a
b
• Slide locking clasps a and b in the direction indicated.
• Open the exhaust filter cover and take out the exhaust filter from the vacuum cleaner.
• Remove the dust by shaking the exhaust filter over the trash can.
• After clean the exhaust filter and put it on the vacuum cleaner.
• Close the exhaust filter cover and relock clasps by sliding in the direction indicated.
15
What to do if your vacuum cleaner does not work
Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working.
What to do when suction performance decreases
• Turn off the vacuum cleaner and unplug it.
• Check the telescopic pipe, flexible hose and cleaning tool for blockages or obstructions.
• Check that the dust tank is not full. Empty if necessary.
• Check that the exhaust filter is not clogged. Clean the exhaust filter if necessary.
• Check that the air filter is not clogged. Clean the air filter if necessary.
16
Note
17
Note
18
Note
19
P/No.: MFL37895405
Made in KOREA
Download PDF

advertising