OWNER’S MANUAL
Real Surround Blu-ray 3D™/
DVD Home Theater System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
HX995TZ (HX995TZ/ SX95TZ-S/C/D)
P/NO : MFL63290059
HX995TZ-FD.BMYSLL_ENG_0059.indd 1
10. 11. 02
10:51
2
1
Safety Information
Safety Information
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service Centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
HX995TZ-FD.BMYSLL_ENG_0059.indd 2
10. 11. 02
10:51
Safety Information
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products
shall be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
1
Safety Information
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
3
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you
purchased the product.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
HX995TZ-FD.BMYSLL_ENG_0059.indd 3
10. 11. 02
10:51
4
Safety Information
Europe Notice
1
0678
Safety Information
LG Electronics hereby declares that this product is
in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC,
EMC Directive 2004/108/EC, Low Voltage Directive
2006/95/EC, and ErP Directive 2009/125/EC.
Please contact to the following address for obtaining
a copy of the DoC (Declaration of Conformity).
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327
AE Almere. The Netherlands
(Tel : +31-(0)36-547-8888)
Indoor Use Only
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the radiator
and your body.
France Notice
Pour la France métropolitaine
2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage
intérieur
2.400 - 2.454 GHz (canaux 1 à 7) autorisé en usage
extérieur
Italy Notice
A general authorization is requested for outdoor use
in Italy.
The use of these equipments is regulated by:
1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject
to general authorization) for outdoor use and
article 105 (free use) for indoor use, in both cases
for private use.
2. D.M. 28.5.03, for supply to public of RLAN access
to networks and telecom services.
L’uso degli apparati è regolamentato da:
1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività
soggette ad autorizzazione generale) se utilizzati
al di fuori del proprio fondo e 105 (libero uso) se
utilizzati entro il proprio
fondo, in entrambi i casi per uso private.
2. D.M. 28.5.03, per la fornitura al pubblico
dell’accesso R-LAN alle reti e ai servizi di
telecomunicazioni.
Brazil Notice
Este equipamento opera em caráter secundário, isto
é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando
em caráter primário.
Latvia Notice
A license is required for outdoor use for operation in
2.4 GHz band.
Pour la Guyane et la Réunion
2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage
intérieur
2.420 - 2.4835 GHz (canaux 5 à 13) autorisé en usage
extérieur
HX995TZ-FD.BMYSLL_ENG_0059.indd 4
10. 11. 02
10:51
Safety Information
Important Notice for TV colour system
• Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analogue signal output,
etc., of AACS protected contents. The operation of
this product and restrictions on this product may
vary depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
The colour system of this player differs according to
currently playing discs.
• Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Centre.
• Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
For example, when the player plays the disc recorded
in the NTSC colour system, the image is output as an
NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
• If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
• The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
1
Safety Information
Notes on Copyrights
5
• Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programmes, videotapes, BD-ROM discs, DVDs,
CDs and other materials may subject you to civil
and/or criminal liability.
HX995TZ-FD.BMYSLL_ENG_0059.indd 5
10. 11. 02
10:51
6
Contents
3
Installation
17
1
17
Assembling the player with
stand
19
Mounting the player on a
wall
Safety Information
2
Cautions and Warnings
Installing the player
21
Assembling the speaker
23
Mounting the speakers on a wall
24
Positioning the system
2
25
Speaker Connection
Preparation
25
Wireless connection
25
Wireless connection for
manually
8
8
8
Introduction
About the “ ” Symbol
Display
25
Symbols Used in this
Manual
26
HDMI Connection
27
What is SIMPLINK?
9
Supplied Accessories
10
Playable Discs
11
File compatibility
12
Regional Code
12
AVCHD (Advanced Video
Codec High Definition)
12
12
13
26
28
Video Connection
28
Resolution Setting
29
Antenna connection
29
Connections with external device
29
PORT. IN connection
Certain System
Requirements
30
OPTICAL IN connection
30
HDMI IN 1/2 connection
Compatibility Notes
31
Connecting to your Home Network
Remote control
31
Wired network connection
Wired Network Setup
Wireless Network
Connection
Player (Front)
32
15
Player (Rear)
33
16
Active woofer
14
Attaching the speakers
Connecting to Your TV
34
HX995TZ-FD.BMYSLL_ENG_0059.indd 6
Wireless Network Setup
37
USB device connection
38
Settings
38
Adjust the Setup Settings
38
[DISPLAY] Menu
40
[LANGUAGE] Menu
40
[AUDIO] Menu
10. 11. 02
10:51
7
42
[LOCK] Menu
43
[NETWORK] Menu
43
[OTHERS] Menu
45
Sound Effect
4
6
Troubleshooting
82
General
83
Picture
83
Sound
84
Network
1
Operation
2
46
General Playback
50
Advanced Playback
53
On-Screen display
56
Enjoying BD-Live™
57
Playing a movie file and VR disc
59
61
7
Appendix
85
Controlling a TV with the Supplied
Remote Control
Viewing a photo
86
Area Code List
Listening to music
87
Language code List
65
Playing the iPod
88
Network Software Update
66
Radio Operations
88
67
Playing content via your home
network
88
Software Update
90
Video output resolution
Using NetCastTM Entertainment
Access
91
Trademarks and Licences
93
Specifications
95
Important Information Relating to
Network Services
72
72
YouTube
76
Picasa Web Albums
79
Using the AccuWeather
Network update notification
3
4
5
96
Open source software notice
97
Gracenote® End User Licence
Agreement
6
5
Maintenance
81
Notes on Discs
81
Handling the Unit
7
8
HX995TZ-FD.BMYSLL_ENG_0059.indd 7
10. 11. 02
10:51
8
Preparation
2
Preparation
2
Introduction
Preparation
About the “ ” Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function
explained in this owner’s manual is not
available on that specific media.
Symbols Used in this Manual
NOTE
Indicates special notes and operating features.
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
BD
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode
and finalized
AVCHD
DVD±R/RW in AVCHD
format
ACD
Audio CDs
MOVIE
Movie files
MUSIC
Music files
PHOTO
Photo files
CAUTION
Indicates cautions for preventing possible
damages from abuse.
HX995TZ-FD.BMYSLL_ENG_0059.indd 8
10. 11. 02
10:51
Preparation
Supplied Accessories
Video cable (1)
Speaker Cables (5)
For Mounting (speakers)
Screw/ Wall plug
(Wall mounting) (8)
Wall Mount Bracket
(Wall/ Speaker) (4)
2
FM antenna (1)
Nero MediaHome4
Essentials software
CD-ROM (1)
Preparation
For standing (player)
Remote control (1)
9
Batteries (2)
Stand (1)
Rear cover (1)
cable cover (1)
Middle screws (3)
iPod cradle (1)
Velcro (1)
Big screws (2)
For Mounting (player)
HDMI cable (1)
Bracket (1)
HX995TZ-FD.BMYSLL_ENG_0059.indd 9
Screws for mounting
(2)
10. 11. 02
10:51
10
Preparation
Playable Discs
Blu-ray Disc™
- Discs such as movies that can
be purchased or rented.
- BD-R/RE discs that contain
Movie, Music or Photo files.
- “Blu-ray 3D™” discs and “Blu-ray
3D™ ONLY” discs
2
Preparation
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc
also
- Finalized AVCHD format
- DVD±R discs that contain
Movie, Music or Photo files.
DVD-RW (8 cm / 12 cm disc)
- VR mode, Video mode and
finalized only
- Finalized AVCHD format
- DVD-RW discs that contain
Movie, Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
- Video mode and finalized only
- Finalized AVCHD format
- DVD+RW discs that contain
Movie, Music or Photo files.
Audio CD (8 cm / 12 cm disc)
CD-R/RW (8 cm / 12 cm disc)
CD-R/RW discs that contain audio
titles, Movie, Music or Photo files.
HX995TZ-FD.BMYSLL_ENG_0059.indd 10
NOTE
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
• BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
• This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
• Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions to ensure
compatible playback.
• Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
• You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live System,
you cannot use it on LG player. (Mastered/Live
File System : Disc format system for windows
Vista)
10. 11. 02
10:51
Preparation
File compatibility
NOTE
Overall
• HD movie files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD movie
files.
Available File extensions:
“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”
Available file extensions differ depending
on the DLNA servers.
•
Some “.wav” files are not supported on this
player.
•
The file name is limited to 180 characters.
•
Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2 000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution size:
1 920 x 1 080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
VobSub (.sub) is not available in the
[Home Link] feature.
Playable Codec format: “DIVX3.xx”, “DIVX4.
xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard
playback only), H.264/MPEG-4 AVC, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
• This player supports H.264/MPEG-4 AVC profile
Main, High at Level 4.1. For a file with higher
level, the warning message will appear on the
screen.
• This player does not support the files that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
MUSIC
Sampling frequency:
between 8 kHz to 48 KHz (WMA),
between 11 kHz to 48 kHz (MP3)
Bit rate:
between 8 kbps to 320 kbps (WMA, MP3),
NOTE
• This unit cannot support the ID3 Tag embedded
MP3 file.
• The total playback time indicated on the screen
may not be correct for VBR files.
•
•
Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency:
between 32 kHz to 48 kHz (WMA),
between 16 kHz to 48 kHz (MP3)
Bit rate:
between 20 kbps to 320 kbps (WMA),
between 32 kbps to 320 kbps (MP3)
HX995TZ-FD.BMYSLL_ENG_0059.indd 11
2
Preparation
•
11
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
•
Progressive and lossless compression photo
image files are not supported.
10. 11. 02
10:51
12
2
Preparation
Regional Code
Certain System Requirements
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the rear of the
unit or “ALL”.
For high definition video playback:
AVCHD (Advanced Video Codec
High Definition)
Preparation
•
This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
•
The AVCHD format is a high definition
digital video camera format.
•
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
•
Some AVCHD discs use the “x.v.Colour”
format.
•
This player can playback AVCHD discs using
“x.v.Colour” format.
•
Some AVCHD format discs may not play,
depending on the recording condition.
•
AVCHD format discs need to be finalized.
•
“x.v.Colour” offers a wider colour range than
normal DVD camcorder discs.
HX995TZ-FD.BMYSLL_ENG_0059.indd 12
•
High definition display that has HDMI input
jacks.
•
BD-ROM disc with high definition content.
•
HDMI or HDCP capable DVI input on your
display device is required for some content
(as specified by disc authors).
•
For up-conversion of standard definition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
Compatibility Notes
•
Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Centre.
•
Viewing high-definition content and upconverting standard DVD content may
require a HDMI-capable input or HDCPcapable DVI input on your display device.
•
Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
•
You can use a USB device that is used
to store some disc related information,
including downloaded on-line content. The
disc you are using will control how long this
information is retained.
10. 11. 02
10:51
Preparation
13
Remote control
1
• • • • • • •c • • • • • •
1 (POWER): Switches the player
ON or OFF.
HOME: Displays or exits the
[Home Menu].
Z OPEN/CLOSE:
Ejects or inserts disc
RADIO&INPUT: Changes input
mode.
MUSIC ID: When connected to the
network, can provide information
about the current song during
movie playback.
0-9 numerical buttons: Selects
numbered options in a menu.
INFO/DISPLAY: Displays or exits
On-Screen Display.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
Direction buttons: Selects an
option in the menu.
REPEAT: Repeats a desired section
or sequence.
• • • • • • •b • • • • • •
3
m/M SCAN: Searches
backward or forward.
./> SKIP: Goes to the next
or previous chapter / track / file.
x (STOP): Stops playback.
B (PLAY): Starts playback.
X (PAUSE): Pauses playback
4
SPEAKER LEVEL: Sets the sound
level of desired speaker.
SOUND EFFECT: Selects a sound
effect mode.
VOL +/- : Adjusts speaker volume.
Battery Installation
OPTICAL: Changes input mode to
optical directly.
MUTE: Mute the unit.
2
Preparation
2
• • • • • • •a • • • • • •
ENTER: Acknowledges menu
selection.
O RETURN: Exits the menu or
resumes playback.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
DISC MENU: Accesses the menu
on a disc.
• • • • • • •d • • • • • •
Coloured (R, G, Y, B) buttons: Use
to navigate on menus.
MONO/STEREO: Selects mono/
stereo in FM mode.
MARKER: Marks any point during
playback.
SEARCH: Displays or exits the
search menu.
SLEEP: Sets a certain period of time
after which the unit will switch to
off.
z REC: Records an audio CD.
TV Control Buttons: See page 85.
Remove the battery cover
on the rear of the Remote
Control, and insert two R03
(size AAA) batteries with
and matched correctly.
HX995TZ-FD.BMYSLL_ENG_0059.indd 13
10. 11. 02
10:51
14
Preparation
Player (Front)
1 2
3
4
5
2
Preparation
1
2
3
4
5
USB Port
PORT. IN
1/\ (POWER) Button
Display window
Operation buttons
F (Function)
Changes the input source or function.
i|| (PLAY / PAUSE)
s (STOP)
&II / ii& (SKIP/SCAN)
- volume + (Adjusts speaker volume.)
A Ejects or inserts disc
CAUTION
Precautions in using the touch buttons
• Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
• Do not press the touch buttons hard to make it
work.
- If you apply too much strength, it can damage
the sensor of the touch buttons.
• Touch the button that you want to work in order
to operate the function correctly.
• Be careful not to have any conductive material
such as metallic object on the touch buttons. It
can cause malfunctions.
HX995TZ-FD.BMYSLL_ENG_0059.indd 14
10. 11. 02
10:51
Preparation
15
Player (Rear)
1
2
2
Preparation
3
4
5
6
7
1 Disc Slot
Insert a disc here.
4 HDMI OUT (type A, Version 1.3)
Connect to TV with HDMI inputs.
2 OPTICAL IN
5 HDMI IN 2
3 VIDEO OUT
6 HDMI IN 1
7 LAN port
HX995TZ-FD.BMYSLL_ENG_0059.indd 15
10. 11. 02
10:51
16
Preparation
Active woofer
2
Preparation
1
1
2
Speaker duct
CAUTION
Be careful to make sure children not to put their
hands or any objects into the speaker duct.
2
3
3
4
5
6
7
4
56
7
Cooling Fan
Speakers connectors
PAIRING button
Antenna Connector
iPod (24 pin)
Connect to the furnished iPod cradle.
LED (connection status)
BLUE: The connection is completed.
BLUE(blink): The woofer is trying to
connect.
RED: The connection is failed.
HX995TZ-FD.BMYSLL_ENG_0059.indd 16
10. 11. 02
10:51
Installation
17
3
Installation
Installing the player
1. Connect the cables.
Step 1
You can stand the player or mount on a wall.
3
Installation
Assembling the player with
stand
Preparation
2. After connecting the cables, you can
arrange the cable with cable holder as
shown below.
Step 2
HX995TZ-FD.BMYSLL_ENG_0059.indd 17
10. 11. 02
10:51
18
Installation
3. Assemble the cover as shown below
Step 3
5. Arrange the cable with cable holder as
shown below.
Step 5
3
Installation
4. Attach the player to the stand.
Then secure the connection with the
supplied middle screws.
Step 4
6. Assemble the rear cable cover as shown
below.
Then secure the cover with the supplied
big screws.
Step 6
HX995TZ-FD.BMYSLL_ENG_0059.indd 18
10. 11. 02
10:51
Installation
Mounting the player on a wall
You can mount the player on a wall.
Prepare screws, bracket and guide sheet (the
rear page of install guide) supplied.
Preparation
19
2. When you mount on a wall(concrete), use
the wall plugs and screws (Not supplied).
Attach the wall bracket on the wall as
shown in the illustration below.
Step 2
3
Installation
1. You should drill some holes. A guide sheet
(rear page of the install guide) is supplied
to drill. Use the sheet to check the point to
drill.
Step 1
NOTE
15 cm
• Screws and Wall Plugs are not supplied for
mounting the unit.
We recommend the Hilti (HUD-1 6 x 30) for the
mounting. Please purchase it.
Rear page of the
installation guide
HX995TZ-FD.BMYSLL_ENG_0059.indd 19
10. 11. 02
10:51
20
Installation
3. Assemble the screws.
Step 3
5. Hang the player onto the brackets as below.
Step 5
3
Installation
4. Connect the cables.
Step 4
CAUTION
• Do not hang onto the installed unit and avoid
any impact to the unit.
• Secure the unit firmly to the wall so that it does
not fall off. If the unit falls off, it may result in an
injury or damage to the product.
• When the unit is installed on a wall, please make
sure that a child does not pull any of connecting
cables, as it may cause it to fall.
HX995TZ-FD.BMYSLL_ENG_0059.indd 20
10. 11. 02
10:51
Installation
Assembling the
speaker
21
2. Insert a speaker wire from the bottom of
the base.
Step 2
Preparation
Pole
Pole
Cable
Cable
3
Speaker
Speaker
Screw
Screw
3. Draw the speaker wire through the inside of
the pole and also through the hole on the
bottom of the speaker.
Installation
Base
Base
Step 3
1. Attach the pole to the base, then secure the
connection with a supplied screw.
Step 1
HX995TZ-FD.BMYSLL_ENG_0059.indd 21
10. 11. 02
10:51
22
Installation
4. Attach the speaker to the pole, then secure
the connection with a supplied screw.
Step 4
5. Connect the speaker wire to the terminal
on the speaker.
Make sure the wire marked black goes in
to the terminal marked “–” (minus) and the
other wire goes in to the terminal marked
“+” (plus).
Step 5
3
Installation
CAUTION
Be careful that the speaker
should not fall down.
Otherwise it may result in the
speaker malfunctioning and
causing personal injury and/ or
property damage.
HX995TZ-FD.BMYSLL_ENG_0059.indd 22
10. 11. 02
10:51
Installation
Mounting the
speakers on a wall
23
2. Attach the speaker bracket to the speaker
and fasten the screws.
Step 2
You can mount the speakers on a wall.
Prepare screws and brackets supplied.
When you mount to a wall(concrete), use
the wall plugs. You should drill some holes
(Diameter: 6 mm, Depth: more than 32 mm)
for the mounting.
Screw & Wall plug
3
Step 3
20 mm
Installation
3.5 mm
3. Hang the speaker bracket onto the wall
bracket.
6 mm
32 mm
1. Attach the wall bracket to the wall with
screws as shown in the illustration below.
Step 1
4. Press the speaker to secure the brackets.
Wall plug
plug
Wall
Step 4
Screw
Screw
HX995TZ-FD.BMYSLL_ENG_0059.indd 23
10. 11. 02
10:51
24
Installation
A Front left speaker (L)/
B Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
Positioning the
system
3
The following illustration shows an example
of positioning the system. Note that the
illustrations in these instructions differ from the
actual unit for explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A).
Installation
B
C
A
G
F
A
A
A
D Surround left speaker (L)/
E Surround right speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
F Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place
the subwoofer near the front speakers. Turn
it slightly toward the Centre of the room to
reduce the wall reflections.
G Unit
A
A
D
C Centre speaker:
Place the Centre speaker above or below the
monitor or screen.
E
CAUTION
• Place the Centre speaker at a safe distance from
the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or
property damage.
• The speakers contain magnet parts, so colour
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers away
from the TV screen or PC monitor screen.
HX995TZ-FD.BMYSLL_ENG_0059.indd 24
10. 11. 02
10:51
Installation
Speaker Connection
Wireless connection
The wireless subwoofer makes setup simple,
too - there are no cables to connect. When you
turn on the unit and subwoofer the connection
will be completed automatically.
When the connection is completed, you can
see the icon on the display window.
25
Wireless connection for
manually
You can set up wireless connection manually,
when your connection is not completed.
Refer to the “Connect wireless speakers” on
page 41.
Attaching the speakers
Connect speaker wires to the woofer.
3
Installation
To connect the cable to the woofer, press each
plastic finger pad to open the connection
terminal. Insert the wire and release the finger
pad.
NOTE
• If the wireless connection fails again, check
whether there is any conflict or strong
interference (for example, interference
from other electronic devices) around your
location. After removal of the conflict or strong
interference, repeat the above procedures.
• The available length is 20 m for wireless
connection on open place.
HX995TZ-FD.BMYSLL_ENG_0059.indd 25
10. 11. 02
10:51
26
Installation
Connecting to Your TV
Make one of the following connections,
depending on the capabilities of your existing
equipment.
•
HDMI connection (page 26)
•
Video connection (page 28)
HDMI Connection
If you have a HDMI TV or monitor, you can
connect it to this player using a HDMI cable.
Connect the HDMI OUT jack on the player to
the HDMI IN jack on a HDMI compatible TV or
monitor.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
HDMI Connection
NOTE
3
Installation
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
• Make sure the player is connected directly to
the TV. Tune the TV to the correct video input
channel.
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
HX995TZ-FD.BMYSLL_ENG_0059.indd 26
TV
10. 11. 02
10:51
Installation
27
What is SIMPLINK?
NOTE
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
player and then turn it on again.
LG TV’s with SIMPLINK function has the logo as
shown above.
• When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
Some functions of this unit are controlled by
the TV’s remote control when this unit and LG
TV’s with SIMPLINK are connected through
HDMI connection.
• If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5 m.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 28.)
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 39).
Refer to the TV owner’s manual for the details
of SIMPLINK function.
NOTE
3
Installation
• If a connected HDMI device does not accept the
audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
Controllable functions by LG TV’s remote
control; Play, Pause, Scan, Skip, Stop, Power Off,
etc.
Depending on the disc type or playing
status, some SIMPLINK operation may
differ from your purpose or not work.
• When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x576p (480p), 1280x720p, 1920x1080i or
1920x1080p video input.
• Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
- This player does not playback and TV screen is
changed to black screen.
HX995TZ-FD.BMYSLL_ENG_0059.indd 27
10. 11. 02
10:51
28
Installation
Video Connection
Resolution Setting
Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
You can hear the sound through the system’s
speakers.
The player provides several output resolutions
for HDMI OUT jacks. You can change the
resolution using [Setup] menu.
1. Press HOME (
).
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
Video Connection
3. Use U/u to select [DISPLAY] option then
press i to move to the second level.
4. Use U/u to select the [Resolution] option
then press ENTER ( ) or i to move to the
third level.
3
Installation
TV
TV
Yellow
Yellow
5. Use U/u to select the desired resolution
then press ENTER ( ) to confirm your
selection.
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
576p (480p) as follows:
1. Press Z.
2. Press x for more than 5 seconds.
• Since several factors affect the resolution of
video output, see “Video Output Resolution” on
page 90.
HX995TZ-FD.BMYSLL_ENG_0059.indd 28
10. 11. 02
10:51
Installation
Antenna connection
29
Connections with
external device
Connect the supplied antenna for listening to
the radio.
Antenna Connection
PORT. IN connection
You can enjoy the sound from your portable
audio player through the speakers of this
system.
You can also use the F (Function) button on
the front panel to select the input mode.
3
Installation
Connect the headphones (or line out ) jack
of the portable audio player into the PORT.
IN socket of this unit. And then select the
[PORTABLE] option by pressing RADIO&INPUT
and ENTER ( ).
PORT.IN Connection
NOTE
After connecting the FM wire antenna,
keep it as horizontal as possible. Be sure to
fully extend the FM wire antenna.
MP3 player, etc...
HX995TZ-FD.BMYSLL_ENG_0059.indd 29
10. 11. 02
10:51
30
Installation
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your
component into the OPTICAL IN jacks on the
unit. And then select the [OPTICAL] option by
pressing RADIO&INPUT and ENTER ( ).
Or press OPTICAL to select directly.
3
You can also use the F (Function) button on
the front panel to select the input mode.
HDMI IN 1/2 connection
You can enjoy the pictures and sound from
your component through this connection.
Connect the HDMI OUT jack of your
component into the HDMI IN 1 or 2 jack on this
unit. And then select the [HDMI IN 1/2] option
by pressing RADIO&INPUT and ENTER ( ).
You can also use the F (Function) button on
the front panel to select the input mode.
HDMI IN 1/2 Connection
Installation
Optical Connection
To the digital
To the digital
optical optical
output
jack
output
jack
your component
of yourofcomponent
To the HDMI OUT jack
of your component
To the HDMI OUT jack
your component
(set-topof
box,
digital
(set-top box, digital
receiver,
satellite satellite
receiver,
video game machine,
video game
machine,
etc.)
etc.)
NOTE
• You cannot change the video resolution in the
HDMI IN 1/2 mode. Change the video resolution
of the connected component.
• If the video output signal is abnormal when your
personal computer is connected to HDMI IN
1/2 jack, change the resolution of your personal
computer to 576p (480p), 720p, 1080i or 1080p.
• The video signal from the HDMI input cannot be
output from the composite video outputs.
• The player sends audio from the HDMI inputs
to both the HDMI output and to the unit’s
speakers.
HX995TZ-FD.BMYSLL_ENG_0059.indd 30
10. 11. 02
10:51
Installation
Connecting to your
Home Network
31
Wired Network Connection
Router
Router
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel or the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such
as software updates, Home Link, BD-Live™
interactivity and streaming services.
Broadband
Broadband
Service
Service
WAN
LAN 1
LAN 2
PC
3
PC
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not
subject to radio frequency interference.
Please refer to the documentation for your
network device for further instructions.
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example configuration for wired
connection below, this player would be able to
access content from either of the PCs.
Installation
Wired network connection
LAN 3
NOTE
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
configurations, please follow the specifications
of your telecommunication carrier or internet
service provider.
• If you want to access content from PCs or DLNA
servers, this player must be connected to the
same local area network with them via a router.
HX995TZ-FD.BMYSLL_ENG_0059.indd 31
10. 11. 02
10:51
32
Installation
Wired Network Setup
Before setting the wired network, you need to
connect the broadband internet to your home
network.
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follow.
3
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
5. Select [OK] and press ENTER ( ) to apply
network settings.
Installation
6. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
7. If you select [Test] and press ENTER
( ) at step 6 above, the network
connection status is displayed on the
screen.
You can also test it on the
[Connection Status] in the [Setup] menu.
2. The [Connection Setting] menu appear on
the screen. Use U/u to select the [Wired]
and press ENTER ( ).
3. Selects [Yes] and press ENTER ( ) to
continue. The new connection setting
resets the current network settings.
4. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
HX995TZ-FD.BMYSLL_ENG_0059.indd 32
10. 11. 02
10:51
Installation
Wireless Network Connection
Wireless Network Connection
Another connection option is to use an Access
Point or a wireless router. In the example
configuration for wireless connection below,
this player would be able to access content
from either of the PCs.
The network configuration and connection
method may vary depending on the
equipment in use and the network
environment.
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
Wireless
Communication
Player
PC
Access Point or
Wireless Router
3
WAN
Broadband
service
Installation
This player is equipped with an IEEE 802.11n
(2.4 GHz band only) wireless module, which
also supports the 802.11b/g standards. For the
best wireless performance, we recommend
using a IEEE 802.11n (2.4 GHz band only)
certified Wi-Fi network (access point or wireless
router).
33
NOTE
• For best performance, a direct wired connection
from your Home theatre to your home network’s
router or cable/DSL modem is always the best
option. If your Home theatre is far away from
your router or cable/DSL modem. Ethernet
or LAN cables are available at many stores in
lengths of 15 m and longer. If you do chose to
use the wireless option, note that performance
can sometimes be affected by other electronic
devices in the home.
• An Access Point is a device that allows you to
connect to your home network wirelessly.
HX995TZ-FD.BMYSLL_ENG_0059.indd 33
10. 11. 02
10:51
34
Installation
Wireless Network Setup
Before setting the wireless network, you need
to:
– connect the broadband internet to the
wireless home network.
– set the access point or wireless router.
– note the SSID and security code of the
network.
3
Installation
For the wireless network connection, the
player needs to be set up for network
communication. This adjustment can be done
from the [Setup] menu. Adjust the [NETWORK]
setting as follow. Setting up the access point
or the wireless router is required before
connecting the player to the network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
2. The [Connection Setting] menu appear on
the screen. Use U/u to select [Wireless] and
press ENTER ( ).
3. Selects [Yes] and press ENTER ( ) to
continue. The new connection setting
resets the current network settings.
4. The player scans the all available access
points or wireless routers within range and
display them as a list. Use U/u to select an
access point or wireless router on the list,
and then press ENTER ( ).
If you have security on your access point
or wireless router, verify that the WEP or
WPA key that was entered into the player
matches the router’s information exactly.
You need to input the security code as
necessary.
NOTE
WEP security mode generally have 4 keys available
on an access point or wireless router’s setting.
If your access point or wireless router use WEP
security, enter the security code of the key “No.1” to
connect on your home network.
HX995TZ-FD.BMYSLL_ENG_0059.indd 34
10. 11. 02
10:51
Installation
[Manual] – Your access point may not be
broadcasting its access point name(SSID).
Check your router settings through your
computer and either set your router to
broadcast SSID, or manually enter the
access point name(SSID) in [Manual].
[Push Button] – If your access point or
wireless router that supports Push Button
Configuration method, select this option
and press the Push Button on your access
point or wireless router within 120 counts.
You do not need to know the access point
name (SSID) and security code of your
access point or wireless router.
NOTE
Notes on Network Connection:
•
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
off and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
•
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
•
Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
•
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
•
Some internet contents may require a
higher bandwidth connection.
•
Even if the player is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
6. Select [OK] and press ENTER ( ) to apply
network settings.
7. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
8. If you select [Test] at step 7 above, the
network connection status is displayed on
the screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
HX995TZ-FD.BMYSLL_ENG_0059.indd 35
10. 11. 02
3
Installation
5. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
35
10:51
36
Installation
•
•
•
3
Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
Installation
•
You must use a Router to use xDSL service.
•
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
•
The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
•
The wireless network operate at 2.4 GHz
radio frequencies that are also used by
other household devices such as cordless
telephone, Bluetooth® devices, microwave
oven, and can be affected by interference
from them.
•
Turn off all unused network equipment in
your local home network. Some devices
may generate network traffic.
HX995TZ-FD.BMYSLL_ENG_0059.indd 36
•
For the purpose of the better transmission,
place the player as close as possible to the
access point.
•
In some instances, placing the access point
or wireless router at least 0.45 m above the
floor may improve the reception.
•
Move closer to the access point if possible
or re-orient the player so there is nothing
between it and the access point.
•
The reception quality over wireless depends
on many factors such as type of the access
point, distance between the player and
access point, and the location of the player.
•
Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
10. 11. 02
10:51
Installation
USB device
connection
This player can play movie, music and photo
files contained in the USB device.
1. Insert a USB device to the USB port until it
fits into place.
USB Connection - 1
NOTE
• This player supports USB flash memory/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live™ and Audio CD recording, only
FAT16 and FAT32 formats are supported. Use the
USB flash memory/external HDD formatted in
either FAT16 or FAT32 when using BD-Live™ and
Audio CD recording.
• The USB device can be used for the local storage
for enjoying BD-Live™ discs with Internet.
• This unit can support up to 4 partitions of the
USB device.
• An USB device which requires additional
programme installation when you have
connected it to a computer, is not supported.
• USB device: USB device that support USB 1.1
and USB 2.0.
3. Select a file using U/u/I/i, and press PLAY
or ENTER ( ) to play the file.
You can check the space of the USB device
on the screen.
3
Installation
• Do not extract the USB device during operation
(play, etc.).
2. Select [Movie], [Photo] or [Music] using I/
i, and press ENTER ( ).
37
• Movie, music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
• Regular back up is recommended to prevent
data loss.
• If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognised.
• Some USB device may not work with this unit.
• Digital camera and mobile phone are not
supported.
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
4. Select the other mode. And withdraw the
USB device carefully.
HX995TZ-FD.BMYSLL_ENG_0059.indd 37
10. 11. 02
10:51
38
Installation
Settings
[DISPLAY] Menu
TV Aspect Ratio
Adjust the Setup Settings
You can change the settings of the player in
the [Setup] menu.
1. Press HOME (
).
Select a TV aspect ratio option according to
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
3
Installation
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
3. Use U/u to select a first setup option, and
press i to move to the second level.
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to fill the entire screen.
NOTE
4. Use U/u to select a second setup option,
and press ENTER ( ) to move to the third
level.
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
5. Use U/u to select a desired setting, and
press i or ENTER ( ) to confirm your
selection.
HX995TZ-FD.BMYSLL_ENG_0059.indd 38
10. 11. 02
10:51
Installation
Resolution
1080p Display Mode
Sets the output resolution of the HDMI video
signal. Refer to page 28 and page 90 for details
about the resolution setting.
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/ 24 Hz) with a HDMI-equipped display
compatible with 1080p/ 24 Hz input.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best
suited to the connected TV.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
NOTE
• When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [50 (60) Hz].
[576i (480i)]
Outputs 576 (480) lines of interlaced video.
HDMI Color Setting
3
Installation
• Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/ 24 Hz, the actual frame frequency of
the video output will be 50 (60) Hz to match the
video source format.
[720p]
Outputs 720 lines of progressive video.
[576p (480p)]
Outputs 576 (480) lines of progressive video.
39
Select the type of output from the HDMI
OUT jack. For this setting, please refer to the
manuals of your display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI (RGB)
display device.
3D Mode
Select the type of output mode for Blu-ray
3D™ disc playback. Refer to page 48 for more
information about Blu-ray 3D™ disc.
[Off ]
Blu-ray 3D™ disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[On]
Blu-ray 3D™ disc playback will output as 3D
mode.
HX995TZ-FD.BMYSLL_ENG_0059.indd 39
10. 11. 02
10:51
40
Installation
[LANGUAGE] Menu
[AUDIO] Menu
Display Menu
Speaker Setup
Select a language for the [Setup] menu and
on-screen display.
To obtain the best possible sound, use the
speaker setup display to specify the volume
of the speakers you have connected and their
distance from your listening position. Use the
test to adjust the volume of the speakers to the
same level.
Disc Menu/ Disc Audio/
Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
3
Installation
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER ( ) to select another language.
Use number buttons then ENTER ( ) to
enter the corresponding 4-digit number
according to the language code list on
page 87.
[Off ] (for Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
[Speaker]
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker
and the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
HX995TZ-FD.BMYSLL_ENG_0059.indd 40
10. 11. 02
10:51
Installation
HD AV Sync
Connect wireless speakers
Sometimes Digital TV encounters a delay
between picture and sound. If this happens
you can compensate by setting a delay on the
sound so that it effectively ‘waits’ for the picture
to arrive: this is called HD AV Sync. Use U u to
scroll up and down through the delay amount,
which you can set at anything between 0 and
300 ms.
When the unit is manufactured, the ID is
already set. If an interference occurs or you use
a new wireless subwoofer, an ID should be set
again.
41
When the [Wireless Speaker Connection
Guide] appears, press PAIRING button on the
subwoofer.
The delay will vary depending on which digital
TV channel you are on. If you change channel
you may need to readjust the HD AV Sync.
3
DRC (Dynamic Range Control)
Installation
This function allows you to listen to a movie at
a lower volume without losing clarity of sound.
[Off ]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
- If you see the blue LED indicator light on the
woofer, the pairing was successful. Select the
[Speaker test] to test the connection.
[Auto]
The dynamic range of the Dolby TrueHD
audio output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same
as the [On] mode.
NOTE
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete stop
mode.
HX995TZ-FD.BMYSLL_ENG_0059.indd 41
10. 11. 02
10:51
42
Installation
[LOCK] Menu
To access the any features in [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER ( ) to create a new
password.
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select this, parental control is not
active and the disc plays in full.
Password
You can create or change the password.
3
Installation
[None]
Enter a 4-digit password twice, and press
ENTER ( ) to create a new password.
[Change]
Enter the current password and press ENTER
( ). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
BD Rating
Sets an age limit for BD-ROM playback.
Use number buttons to input an age limit for
BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
NOTE
If you make a mistake before pressing ENTER ( ),
press CLEAR. Then input the correct password.
NOTE
The [BD Rating] will be applied only for the BD disc
that containing the Advanced Rating Control.
If you forget your password,
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Lock] option in the [Setup] menu.
Area Code
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 86.
3. Use number buttons to enter “210499” on the
[Lock] Menu. The password is cleared.
HX995TZ-FD.BMYSLL_ENG_0059.indd 42
10. 11. 02
10:51
Installation
[NETWORK] Menu
The [NETWORK] settings are needed to use
the software update, BD Live, Home Link and
NetCast features.
Connection Setting
If your home network environment is ready to
connect to the player, the player needs to be
set up for network communication.
(See “Connecting to your Home Network” on
page 31.)
If you want to check the network status on
this player, select the [Connection Status]
options and press ENTER ( ) to check whether
a connection to the network and the internet
have been established.
BD-Live connection
You can restrict Internet access when BD-Live™
functions are used.
[Permitted]
Internet access is permitted for all BD-Live™
contents.
[Partially permitted]
Internet access is permitted only for BDLive™ contents which have content owner
certificates. Internet access and AACS
Online functions are prohibited for all BDLive™ contents without a certificate.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
3
Installation
Connection Status
43
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
NOTE
All the downloaded videos from DivX VOD with
this player’s registration code can only be played
back on this unit.
[Prohibited]
Internet access is prohibited for all BD-Live™
contents.
HX995TZ-FD.BMYSLL_ENG_0059.indd 43
10. 11. 02
10:51
44
Installation
Auto Power Off
The screen saver appears when you leave
the player in stop mode for about five
minutes. If you set this option to [On], the unit
automatically turns itself off after the Screen
Saver is displayed for 25 minutes.
Set this option to [Off ] to leave the screen
saver until the unit is operated by the user.
Initialize
Factory Set
You can reset the player to its original
factory settings.
3
Installation
BD Storage Clear
Initializes the BD contents from the
connected USB storage.
NOTE
If you reset the player to its original factory settings
using [Factory Set] option, you have to set all the
activation for the on-line services and network
settings again.
Software
Information
Displays the current software version.
Update
You can update the software by connecting
the unit directly to the software update
server (see page 88).
Disclaimer Notice
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 95.
HX995TZ-FD.BMYSLL_ENG_0059.indd 44
10. 11. 02
10:51
Installation
Sound Effect
45
[Clear Voice]: This mode makes voice sound
clear, improving the quality of voice sound.
[Virtual]: You can enjoy more dynamic sound
with improved Centre channel.
You can select a suitable sound mode. Press
SOUND EFFECT repeatedly until the desired
mode appears on the front panel display or the
TV screen. The displayed items for the equalizer
maybe different depending on sound sources
and effects.
[Game]: You can enjoy more virtual sound
while playing video games.
[Night]: This may be useful when you want to
watch movies at low volumes late at night.
[Mus. ReTouch]: When listening to MP3 files or
other compressed music, you can enhance the
sound. This mode is available only to 2 channel
sources.
[Natural]: You can enjoy comfortable and
natural sound.
[Loudness]: Improves bass and treble sound.
3
Installation
[Natural Plus]: You can enjoy the natural
sound effect same as 5.1 channel.
[Bypass]: Software with multichannel surround
audio signals is played according to the way it
was recorded.
[Bass Blast]: Reinforce the bass sound
effect from front left and right speaker and
subwoofer.
[PL ll Movie]: Performs Pro Logic ll movie
mode decoding to the input signal and
produces five full-bandwidth output channels
from 2 channel sources. This setting is ideal for
watching videos of overdubbed or old movies.
This mode is available only to 2 channel
sources.
[PL ll Music]: Performs Pro Logic ll music mode
decoding to the input signal and produces
five full-bandwidth output channels from
2 channel sources. This setting is ideal for
normal stereo sources such as CD. This mode is
available only to 2 channel sources.
HX995TZ-FD.BMYSLL_ENG_0059.indd 45
10. 11. 02
10:51
46
Operation
4
Operation
General Playback
Playing Discs
1. Insert a Disc.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
4
2. Press HOME (
).
5. Select a file using U/u/I/i, and press B
(PLAY) or ENTER ( ) to play the file.
NOTE
• Playback functions described in this manual are
not always available in every files and medium.
Some functions can be restricted depending on
many factors.
• Depending on the BD-ROM titles, a USB device
connection may be needed for the proper
playback.
Operation
3. Select [Movie], [Photo] or [Music] using I/
i, and press ENTER ( ).
4. Select the Disc option using I/i, and press
ENTER ( ).
When you connect up to two devices, it
appears as above.
HX995TZ-FD.BMYSLL_ENG_0059.indd 46
10. 11. 02
10:51
Operation
To stop playback
Press x (STOP) during playback.
Using the disc menu
BD
DVD
AVCHD
To pause playback
To display the disc menu
Press X (PAUSE) during playback.
Press B (PLAY) to resume playback.
The menu screen may be displayed first after
loading a disc which contains a menu. If you
want to display the disc menu during playback,
press DISC MENU.
To play frame-by-frame
Press X (PAUSE) while movie playback.
Press X (PAUSE) repeatedly to play Frame-byFrame playback.
47
Use U/u/I/i buttons to navigate through
menu items.
To display the Pop-up menu
To scan forward or backward
Press m or M to play fast forward or fast
reverse during playback.
You can change the various playback speeds
by pressing m or M repeatedly.
Some BD-ROM discs contain a Pop-up menu
that appears during playback.
Press TITLE/POPUP during playback, and use
U/u/I/i buttons to navigate through menu
items.
Operation
To slow down the playing speed
4
While the playback is paused, press M
repeatedly to play various speeds of slow
motion.
To skip to the next/previous
chapter/track/file
During playback, press . or > to go to
the next chapter/track/file or to return to the
beginning of the current chapter/track/file.
Press . twice briefly to step back to the
previous chapter/track/file.
HX995TZ-FD.BMYSLL_ENG_0059.indd 47
10. 11. 02
10:51
48
Operation
Resume playback
BD
MUSIC
DVD
AVCHD MOVIE
Playing Blu-ray 3D™ disc
ACD
The unit records the point where you pressed
the x (STOP) depending on the disc.
If “Xx (Resume Stop)” appears on the screen
briefly, press B (PLAY) to resume playback
(from the scene point).
If you press x (STOP) twice or unload the disc,
“x”(Complete Stop) appears on the screen.
The unit will clear the stopped point.
This player can play the Blu-ray 3D™ discs
which contains separate views for the left and
right eyes.
Preparation
In order to playback Blu-ray 3D™ title in
stereoscopic 3D mode, you need to:
a
b
NOTE
• The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
Z (OPEN/CLOSE), etc).
4
Operation
• On BD-Video discs with BD-J, the resume
playback function does not work.
c
d
• If you press x (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
a Check if your TV is 3D capable and has
HDMI 1.4 input(s).
b Wear 3D glasses to enjoy the 3D
experience if it is necessary.
If you want to purchase additional
3D-ready glasses, contact the dealer that
you purchased the 3D-ready TV from.
c Check whether the BD-ROM title is the
Blu-ray 3D™ disc or not.
d Connect an HDMI cable (version 1.3 or
higher) between the player’s HDMI output
and TV’s HDMI input.
HX995TZ-FD.BMYSLL_ENG_0059.indd 48
10. 11. 02
10:51
Operation
1. Press HOME ( ), and set the [3D Mode]
option on the [Setup] menu to [On]
(page 39).
2. Insert a disc.
3. The playback starts automatically.
The 3D icon appears on the screen when
3D content is in playback.
4. Refer to the owner’s manual of your
3D-ready TV for the further instruction.
You may need to adjust the display settings
and focus on your TV’s setting for the
improved 3D effect.
• Watching a 3D content for a long period time
may cause dizziness or tiredness.
• It is not recommended to watch a movie in 3D
mode for infirm, child and pregnant woman.
Available Blu-ray 3D™ Discs
The “Blu-ray 3D™” logo labeled
BD-ROM disc can be played
on this player with 3D mode
output. If your TV is not the
Blu-ray 3D™-ready TV*, 2D
mode output is available.
The “Blu-ray 3D™ ONLY” logo
labeled BD-ROM disc can be
played on this player with
3D mode output. The Blu-ray
3D™ ONLY disc playback is not
available, if your TV or player
are not the Blu-ray 3D™-ready
device.
* 3D-ready TV refers to TVs that are compliant
with “HDMI 1.4 3D mandatory format”
standard.
4
NOTE
The “Blu-ray 3D™” and “Blu-ray 3D™ ONLY” may not
be printed on your BD-ROM disc, even if the disc
contains 3D contents.
Operation
CAUTION
49
• If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
HX995TZ-FD.BMYSLL_ENG_0059.indd 49
10. 11. 02
10:51
50
Operation
Advanced Playback
DVD
AVCHD
ACD
MUSIC
During playback, press REPEAT repeatedly to
select a desired repeat mode.
BDs/DVDs
A- – Selected portion will be repeated
continually.
Chapter – The current chapter will be
played back repeatedly.
Title
Title – The current title will be played
back repeatedly.
4
To return to normal playback, press REPEAT
repeatedly to select [Off ].
Operation
Audio CDs/Music files
– The current track or file will be
played back repeatedly.
– All the tracks or files will be played
back repeatedly.
– The tracks or files will be played back
in random order.
– All the tracks or files will be
played back repeatedly in random order.
– Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
NOTE
• If you press > once during Repeat Chapter/
Track playback, the repeat playback cancels.
• This function may not work on some disc or title.
HX995TZ-FD.BMYSLL_ENG_0059.indd 50
BD
DVD
AVCHD
ACD
This player can repeat a portion you have
selected.
Repeat Playback
BD
Repeating a specific portion
1. During playback, press REPEAT to select [A-]
at the beginning of the portion you wish to
repeat. And then press ENTER ( ).
2. Press ENTER ( ) at the end of the portion.
Your selected portion will be repeated
continually.
3. To return to normal playback, press REPEAT
repeatedly to select [OFF] or press CLEAR.
NOTE
You cannot select a portion less than 3 seconds.
Marker Search
BD
DVD
AVCHD MOVIE
You can start playback from up to nine
memorized points.
To enter a marker
1. During playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen briefly.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
10. 11. 02
10:51
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
51
Using the search menu
BD
DVD
AVCHD MOVIE
Using search menu, you can easy to find the
point where you want to start playback.
To search a point
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to delete.
1. During playback, press SEARCH to display
the search menu.
3. Press CLEAR and the marked scene is erased
from the search menu.
NOTE
• This function may not work depending on discs,
titles, server ability.
2. Press I/i to skip the playback 15 seconds
forward or backward. You can select a
point that you want to skip by pressing and
holding I/i button.
To start playback from a marked
scene
• If the total length of the title is less than
10 seconds, this function is not available.
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to playback from.
4
Operation
• All marked points are cleared if the title is in
complete stop (x) mode, the title is changed or
if you unload the disc.
3. Press ENTER ( ) to start playback from the
marked scene.
NOTE
• This function may not work depending on discs,
titles, server ability.
• This function may not work on some [Home
Link] contents depending on the file type and
ability of the DLNA server.
HX995TZ-FD.BMYSLL_ENG_0059.indd 51
10. 11. 02
10:51
52
Operation
Changing content list view
Viewing content information
MOVIE MUSIC PHOTO
MOVIE
On the [Movie], [Music], [Photo] or [Home Link]
menu, you can change the content list view.
The player can display the content information.
Method 1
2. Press INFO/DISPLAY ( ) to display the
option menu.
Press red (R) coloured button repeatedly.
1. Select a file using U/u/I/i.
3. Select the [Information] option using U/u,
and press ENTER ( ).
The file information appears on the screen.
During movie playback, you can display the file
information by pressing TITLE/POPUP.
NOTE
The information displayed on the screen may
not be correct compared to the actual content
information.
4
Operation
Last Scene Memory
BD
Method 2
1. On the content list, press INFO/DISPLAY ( )
to display the option menu.
2. Use U/u to select the [View Change]
option.
3. Press ENTER ( ) to change the content list
view.
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch off the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
• This function may not work depending on the
disc.
• This unit does not memorize settings of a disc if
you switch off the unit before commencing to
play it.
HX995TZ-FD.BMYSLL_ENG_0059.indd 52
10. 11. 02
10:51
Operation
On-Screen display
You can display and adjust various information
and settings about the content.
Displaying content information
on-screen
BD
DVD
AVCHD MOVIE
53
i Movie Information – Select this option
and press ENTER ( ) to display movie
information
2. Select an option using U/u.
3. Use I/i to adjust the selected option
value.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
1. During playback, press INFO/DISPLAY ( )
to show various playback information.
• If no button is pressed for a few seconds, the onscreen display disappears.
• A title number cannot be selected on some
discs.
a
b
c
e
f
g
h
i
a Title – Current title number/total number
of titles
• If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
• To use the [Movie Information] option, the player
must be connected to the broadband internet
for accessing the Gracenote Media Database.
4
Operation
d
• Available items may differ depending on discs
or titles.
• If the music information from the
Gracenote® media database is either not correct
or not exist, please contact Gracenote® at
http://www.gracenote.com for support.
• LG is a licence of Gracenote® technology and is
not responsible or reliable for information from
the Gracenote® media database.
b Chapter – Current chapter number/total
number of chapters
c Time – Elapsed playing time/Total
playback time
d Audio – Selected audio language or
channel
e Subtitle – Selected subtitle
f Angle – Selected angle/total number of
angles
g TV Aspect Ratio – Selected a TV aspect
Ratio
h Picture Mode – Selected picture mode
HX995TZ-FD.BMYSLL_ENG_0059.indd 53
10. 11. 02
10:51
54
Operation
Playing from selected time
BD
DVD
AVCHD MOVIE
1. Press INFO/DISPLAY ( ) during playback.
The time search box shows the elapsed
playing time.
2. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press I/i to skip the playback 60 seconds
forward or backward.
3. Press ENTER ( ) to start playback from
selected time.
NOTE
4
Operation
• This function may not work on some disc or
titles.
• This function may not work on some [Home
Link] contents depending on the file type and
ability of the DLNA server.
Hearing different audio
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Audio] option.
3. Use I/i to select desired audio language,
audio track or audio channel.
NOTE
• Some discs allow you to change audio selections
only via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose
the appropriate audio from the selections on
the disc menu.
• Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
• On BD-ROM disc, the multi audio format (5.1CH
or 7.1CH) is displayed with [MultiCH] in the onscreen display.
Selecting a subtitle language
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Subtitle] option.
3. Use I/i to select desired subtitle language.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
HX995TZ-FD.BMYSLL_ENG_0059.indd 54
10. 11. 02
10:51
Operation
Watching from a different
angle
BD
DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
Changing the Picture Mode
BD
DVD
AVCHD MOVIE
You can change the [Picture mode] option
during playback.
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Picture Mode]
option.
2. Use U/u to select the [Angle] option.
3. Use I/i to select desired option.
3. Use I/i to select desired angle.
4. Press RETURN (O) to exit the On-Screen
display.
4. Press RETURN (O) to exit the On-Screen
display.
55
Setting the [User setting] option
Changing the TV Aspect Ratio
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Picture Mode]
option.
3. Use I/i to select the [User setting] option,
and press ENTER ( ).
4
Operation
You can change the TV aspect ratio setting
during playback.
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [TV Aspect Ratio]
option.
3. Use I/i to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV Aspect
Ratio] option in the [Setup] menu is not changed.
HX995TZ-FD.BMYSLL_ENG_0059.indd 55
4. Use U/u/I/i to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER
( ) to reset the all adjustments.
5. Use U/u/I/i to select the [Close] options,
and press ENTER ( ) to finish setting.
10. 11. 02
10:51
56
Operation
Enjoying BD-Live™
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW™ (BD-ROM version 2 Profile 1
version 1.1/ Final Standard Profile).
Secondary video and audio can be played from
a disc compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
4
In addition to the BONUSVIEW™ function, BDVideo supporting BD-Live™ (BD-ROM version
2 Profile 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
Operation
1. Check the network connection and settings
(page 31).
2. Insert a USB storage device.
A USB storage device is needed to
download bonus content.
USB Connection
HX995TZ-FD.BMYSLL_ENG_0059.indd 56
3 . Press Home ( ), and set the [BD-LIVE
connection] option on the [Setup] menu
(page 43).
Depending on the disc, the BD-Live™
function may not operate if
[BD-LIVE connection] option is set to
[Partially Permitted].
4 . Insert a BD-ROM with BD-Live™.
The operations may differ depending on
the disc. Refer to the manual supplied with
the disc.
NOTE
• Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc™
is still. Doing so may damage the connected
USB device and BD-Live™ features may not
operate properly with the damaged USB device
anymore. If the connected USB device seems
damaged from such an action, you can format
the connected USB device from the PC and
reuse it with this player.
• Some BD-Live™ contents may be restrictively
accessed in some territories by contents
provider’s own decision.
• It may take up to several minutes to load and
start enjoying BD-Live™ contents.
10. 11. 02
10:51
Operation
Playing a movie file
and VR disc
57
NOTE
• The file requirements are described on page 11.
• You can use various playback functions. Refer to
pages 46-55.
You can play DVD-RW discs that are recorded
in Video Recording (VR) format and movie files
contained in a disc or USB device.
1. Press HOME (
).
• Unfinalized DVD VR format discs may not be
played in this player.
• Some DVD-VR disc are made with CPRM data
by DVD recorder. This unit cannot support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
‘copy once’ broadcast programmes. CPRM stands
for Content Protection for Recordable Media.
2. Select [Movie] using I/i, and press ENTER
( ).
4
Operation
3. Select the device using I/i, and press
ENTER ( ).
When you connect up to two devices, it
appears as above.
4. Select a file using U/u/I/i, and press PLAY
or ENTER ( ) to play the file.
HX995TZ-FD.BMYSLL_ENG_0059.indd 57
10. 11. 02
10:51
58
Operation
Selecting a subtitle file
Changing subtitle code page
MOVIE
MOVIE
If a movie file name and the subtitle file
name are the same, subtitle file is played
automatically when playing the movie file.
If the subtitle is not displayed properly, You
can change the subtitle code page to view the
subtitle file properly.
If the subtitle file name is different with the
movie file name, you need to select the subtitle
file on the [Movie] menu before playing the
movie.
1. During playback, press INFO/DISPLAY ( ) to
display the on-screen display.
1. Use U/u/I/i to select the subtitle file you
wish to play in the [Movie] menu.
2. Use U/u to select the [Code Page] option.
3. Use I/i to select desired code option.
2. Press ENTER ( ).
4
Operation
4. Press RETURN (O) to exit the On-Screen
display.
Press ENTER ( ) again to deselect the
subtitle file. Selected subtitle file will be
displayed when you play the movie file.
NOTE
• If you press x (STOP) during playback, the
subtitle selection is cancelled.
• This function may not work in the [Home Link]
feature.
HX995TZ-FD.BMYSLL_ENG_0059.indd 58
10. 11. 02
10:51
Operation
Viewing a photo
You can view photo files using this player.
1. Press HOME (
59
To play a slide show
Press B (PLAY) to start slide show.
To stop a slide show
Press x (STOP) while slide show.
).
To pause a slide show
Press X (PAUSE) while slide show.
Press B (PLAY) to re-start the slide show.
To skip to the next/previous photo
2. Select [Photo] using I/i, and press ENTER
( ).
3. Select the device using I/i, and press
ENTER ( ).
While viewing a photo in full screen, press I or
i to go to the previous or next photo.
NOTE
• The file requirements are described on page 11.
4
Operation
• You can use various playback functions. Refer to
pages 46-55.
When you connect up to two devices, it
appears as above.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
HX995TZ-FD.BMYSLL_ENG_0059.indd 59
10. 11. 02
10:51
60
Operation
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
Listening to music while slide
show
You can display photo files while listening to
music files.
1. Press HOME (
).
2. Select an option using U/u.
a
b
c
d
e
f
g
h
4
2. Select [Photo] or [Home Link] using I/i,
and press ENTER ( ).
3. Select the [Disc] or [USB] option using I/i,
and press ENTER ( ).
Operation
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
c Music Select – Select the background
music for the slide show.
d Music –Press ENTER ( ) to start or pause
background music.
Selecting a server or a share folder is
needed for [Home Link] menu.
e Rotate – Press ENTER ( ) to rotate the
photo clockwise.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
f Zoom – Press ENTER ( ) to display the
[Zoom] menu.
5. Press INFO/DISPLAY ( ) to display the
option menu.
g Effect – Use I/i to select a transition
effect between photos in a slide show.
6. Use U/u to select [Music Select] option,
and press ENTER ( ) to display the [Music
Select] menu.
h Speed – Use I/i to select a delaying
speed between photos in a slide show.
3. Press RETURN (O) to exit the option menu.
HX995TZ-FD.BMYSLL_ENG_0059.indd 60
10. 11. 02
10:51
Operation
7. Use U/u to select a device, and press ENTER
( ).
Devices that you can select may differ
depending on the location of the photo file
you are displaying in full screen.
Photo location
Available Device
Disc
Disc, USB
USB
Disc, USB
Share Folder on
your PC (CIFS)
CIFS
DLNA server
DLNA server
8. Use U/u to select a file or a folder you wish
to play.
Listening to music
The player can play Audio CDs and music files
1. Press HOME (
).
2. Select [Music] using I/i, and press ENTER
( ).
3. Select the device using I/i, and press
ENTER ( ).
Select and press ENTER ( ) to display
the upper directory.
NOTE
When selecting music from [Home Link], folder
selection is not available. Only file selection is
available on the [Home link].
4
Operation
Select a folder and press ENTER ( ) to
display the lower directory.
61
When you connect up to two devices, it
appears as above.
4. Select a music file or audio track using
U/u/I/i, and press ENTER ( ) to play the
music.
NOTE
• The file requirements are described on page 11.
9. Use i to select [OK], and press ENTER ( )
to complete music selection.
HX995TZ-FD.BMYSLL_ENG_0059.indd 61
• You can use various playback functions. Refer to
pages 46-55.
10. 11. 02
10:51
62
Operation
Audio CD Recording
You can record one desired track or all of the
tracks in Audio CD to a USB storage device.
1. Insert a USB storage device to the USB port
on the front panel.
2. Insert CD
The playback starts automatically.
3. Press INFO/DISPLAY ( ) to display the
option menu.
Or
Press z REC button on the remote control.
You can record all musics in the audio CD.
4. Use U/u to select [CD Recording] option,
and press ENTER ( ) to display the [CD
Recording] menu.
4
Operation
Repeat this step to select tracks as many as
you want.
5. Use U/u to select a track you wish to copy
on the menu, and press ENTER ( ).
If you want to create a new folder, use U/u/
I/i to select [New Folder] and press ENTER
( ).
Enter a folder name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
8. Use U/u/I/i to select [OK], and press
ENTER ( ) to start Audio CD recording.
If you want to stop in progressing Audio CD
recording, press ENTER ( ) while [Cancel] is
highlighted.
9. A message appears when Audio CD
recording is completed. Press ENTER
( ) to check the music file created in the
destination folder.
Repeat this step to select tracks as many as
you want.
Select all the tracks on an Audio
CD.
Selects an encoding option from
the pop-up menu (128 kbps,
192 kbps, 320 kbps or Lossless).
Cancels the recording and
returns to the previous screen.
6. Use U/u/I/i to select [Start], and press
ENTER ( ).
7. Use U/u/I/i to select the destination
folder to be copied.
HX995TZ-FD.BMYSLL_ENG_0059.indd 62
10. 11. 02
10:51
Operation
63
NOTE
• The table below shows the average recording
time from an audio track with 4 minutes of
playback time to a music file with 192 kbps as an
example.
stop mode
during playback
1.4 min.
2 min.
• All times in the above table are approximate.
• Actual recording time for USB storage device
varies depending on the USB storage device’s
ability.
• Make sure that there is minimum of 50 MB free
space when recording into the USB storage
device.
• The length of the music should be longer than
20 seconds for the proper recording.
• Do not turn off this player or extract the
connected USB storage device during Audio CD
recording.
4
Operation
The making of unauthorized copies of
copy-protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal offense.
This equipment should not be used
for such purposes.
Be responsible
Respect copyrights
HX995TZ-FD.BMYSLL_ENG_0059.indd 63
10. 11. 02
10:51
64
Operation
Viewing information from
Gracenote Media Database
The player can access to the Gracenote Media
Database and loads the music information so
that Track name, Artist Name, Genre and other
text information can be displayed on the list.
BD/DVD
While listening to music from the movie
playback, press MUSIC ID to start loading
music information from the Gracenote Media
Database.
NOTE
Audio CD
When you insert an Audio CD, the player starts
playback automatically and load the music title
from the Gracenote® Media Database.
If there is no music information from the
database, music titles will not appear on the
screen.
4
• The player must be connected to the broadband
internet for accessing the Gracenote® Media
Database.
• If the music information is not in the
Gracenote® Media Database, message appears
on the screen.
Operation
Music file
• If the music information from the
Gracenote® media database is either not correct
or not exist, please contact Gracenote® at
http://www.gracenote.com for support.
1. Select a music file or audio track using
U/u/I/i.
• Depending on the cases, it will takes a few
minutes to load music information from the
Gracenote® media database.
2. Press INFO/DISPLAY ( ) to display the
option menu.
• Information may be displayed in broken letters,
if the language you selected is not available on
the Gracenote Media Database.
3. Select the [Information] option using U/u,
and press ENTER ( ).
The player accesses Gracenote Media
Database for the music information.
• This function is not available for NetCast on-line
content and content in DLNA servers.
• LG is a licence of Gracenote® technology and is
not responsible or reliable for information from
the Gracenote® media database.
• Audio CDs that users made for their only private
purposes cannot be supported in this feature
because they are not in the Gracenote Media
Database.
HX995TZ-FD.BMYSLL_ENG_0059.indd 64
10. 11. 02
10:51
Operation
Playing the iPod
Preparation
•
Before connecting the iPod, turn this unit
off and reduce the volume of this unit to its
minimum.
1. Connect the iPod firmly.
If you turn this unit on, your iPod is
automatically turned on and recharging
starts.
Connect the iPod
Connect the cradle and
put your iPod on it.
NOTE
• An error message “CHECK IPOD” or “Connected
iPod model is not supported.” appears when:
- your iPod is not available for the function to be
operated.
• An error message “CHECK IPOD” or “Please
update iPod’s software.” appears when:
- your iPod has an old software version.
t Update your iPod software to latest version.
• If this unit displays an error message, follow the
message. An error message “CHECK IPOD” or
“Please check your iPod.” appears when:
- the communication between this unit and
your iPod is failed.
t Undock & re-dock your iPod in this unit.
- your iPod is not connected firmly.
- this unit recognises your iPod as unknown
device.
- your iPod is exceptionally low on power.
t The battery needs to be charged.
t If you charge the battery while iPod is
extremely low in power, it may take longer
to charge.
• You may use the dock adapter which should
be supplied with your iPod to the dock for the
stable use of the iPod. If you need an adapter,
consult your iPod dealer.
4
Operation
* If you want to attach the cradle
on the woofer, use the velcro
(supplied) to fasten it.
65
• Compatibility with your iPod may vary
depending on the type of your iPod.
2. Press RADIO&INPUT to select iPod IN mode.
U/u/I/i
Selects an option in the menu.
B/ ENTER
Starts playback.
X
To pause while it is playing. To
resume playing, press B (PLAY)
again.
m/M
Fast-forward or rewind a song
./>
Skip the playback forward or
backward .
REPEAT
To select a desired repeat
mode: Track ( ), All ( ), Off
(No display).
HX995TZ-FD.BMYSLL_ENG_0059.indd 65
• iPod touch and iPhone have any difference in
operation other than iPod. You may need any
additional control to use them with this unit.
(e.g. “slide to unlock”)
• If you use an application, make a call, or send
and receive SMS text message, etc. on iPod
touch or iPhone, disconnect it from iPod dock of
this unit and then use it.
• Depending on your iPod’s software version, it
may not be possible to control your iPod from
this unit. We recommend installing the latest
software version.
• If you have a problem with your iPod, please visit
www.apple.com/support/ipod.
10. 11. 02
10:51
66
Operation
Radio Operations
Deleting all the saved stations
Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up. Press CLEAR again.
Then all the saved stations are deleted.
Be sure that the antenna is connected.
(Refer to the page 29)
Listening to the radio
1. Press RADIO&INPUT until TUNER (FM)
appears in the display window. The last
received station is tuned in.
Improving poor FM reception
Press B (blue) (MONO/STEREO) coloured
button on the remote control. This will change
the tuner from stereo to mono and usually
improve the reception.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication
starts to change. Scanning stops when the
unit tunes in a station. Or Press TUNING (-/+)
repeatedly.
4
Operation
3. Adjust the volume by pressing VOL (+/- ) on
the remote control.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press RADIO&INPUT until the TUNER (FM)
appears in the display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press ENTER ( ) a preset number will flash
in the display window.
4. Press PRESET (-/+) to select the preset
number you want.
5. Press ENTER ( ). The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
HX995TZ-FD.BMYSLL_ENG_0059.indd 66
10. 11. 02
10:51
Operation
Playing content via
your home network
This Player can browse and play content from
your PC and DLNA certified media servers
connected on your home network.
About DLNA
67
Accessing a DLNA media
server
1. Check the network connection and settings
(page 31).
2. Press HOME (
).
3. Select [Home Link] using I/i, and press
ENTER ( ).
4. Select a DLNA media server from the list
using U/u, and press ENTER ( ).
This Player is a DLNA Certified digital media
player that can display and play movie,
photo and music content from your DLNAcompatible digital media server (PC and
Consumer Electronics).
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies
with DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software
or other devices may be required. Please refer
to the operating instructions for the software
or device for more information.
HX995TZ-FD.BMYSLL_ENG_0059.indd 67
4
If you want to rescan for available media
servers, press the green (G) coloured
button.
Operation
The Digital Living Network Alliance (DLNA)
is a cross-industry organization of consumer
electronics, computing industry and mobile
device companies. Digital Living provides
consumers with easy sharing of digital media
through a wired or wireless network in the
home.
NOTE
Depending on the media server, this player may
need to get permission from the server.
5. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
10. 11. 02
10:51
68
Operation
NOTE
• The file requirements are described on page 11.
• You can use various playback functions. Refer to
pages 46-55.
• Because the compatibility and available playback
functions on the [Home Link] menu are tested
on the bundle DLNA server (Nero MediaHome
4 Essentials) environment, file requirements and
playback functions on the [Home Link] menu
may differ depending on media servers.
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing movie, music and photo files stored
on your computer with this player as a DLNAcompatiable digital media server.
NOTE
• The Nero MediaHome 4 Essentials CD-ROM is
designed for PCs and should not be inserted in
this player or in any product other than a PC.
• The file requirements on page 11 are not always
compatible. There may have some restrictions
by file features and media server’s ability.
• The supplied Nero MediaHome 4 Essentials CDROM is a customized software edition only for
sharing files and folders with this player.
• The thumbnail of the unplayable files can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
4
Operation
• If there is an unplayable music file in the [Home
Link] menu, the player skips the file and plays
the next file.
• The supplied Nero MediaHome 4 Essentials
software does not support following functions:
Transcoding, Remote UI, TV control, Internet
services and Apple iTunes
• Playing movie subtitle files are only available on
DLNA media server created by supplied Nero
MediaHome 4 Essentials software on this player
package.
• This manual explains operations with the
English version of Nero MediaHome 4 Essentials
as examples. Follow the explanation referring to
the actual operations of your language version.
• The subtitle file name and movie file name have
to be the same and located at the same folder.
• The playback and operating quality of the
[Home Link] function may be affected by your
home network condition.
Installing Nero MediaHome 4
Essentials
• The files from removable media such as USB
drive, DVD-drive etc. on your media server may
not be shared properly.
Before you install Nero MediaHome 4
Essentials, check the system requirement
shown below.
HX995TZ-FD.BMYSLL_ENG_0059.indd 68
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required),
Windows® XP Media Centre Edition 2005
(Service Pack 2 or higher), Windows Server®
2003
•
Windows Vista® 64-bit edition (application
runs in 32-bit mode)
•
Hard drive space: 200 MB hard drive space
for a typical installation of Nero MediaHome
stand-alone
•
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
•
Memory: 256 MB RAM
10. 11. 02
10:51
Operation
•
Graphics card with at least 32 MB video
memory, minimum resolution of 800 x 600
pixels, and 16-bit colour settings
Sharing files and folders
•
Windows® Internet Explorer® 6.0 or higher
On your computer, you must share the folder
contained movie, music and/or photo content
to play them using [Home Link] features.
•
DirectX® 9.0c revision 30 (August 2006) or
higher
This parts explains the procedure for selecting
the shared folders on your computer.
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
Start up your computer, and insert the Nero
MediaHome 4 Essentials CD-ROM into your
computer’s CD-ROM drive. An installation
wizard will walk you through the quick and
uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as
follows:
1. Close all Microsoft Windows programmes
and exit any anti-virus software that may be
running.
3. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
4. Click the [Next] button to display the serial
number input screen. Click [Next] to go to
the next step.
5. If you accept all conditions, click [I accept
the Licence Conditions] check box and click
[Next]. Installation is not possible without
this agreement.
1. Double-click the “Nero MediaHome 4
Essentials” icon on the desktop.
2. Click [Network] icon on the left and define
your network name in the [Network name]
field. The Network name you enter will be
recognised by your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares]
screen.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you
want to share. The selected folder is added
to the list of shared folders.
7. Click [Start Server] icon to start the server.
4
Operation
2. Insert the Nero MediaHome 4 Essentials
CD-ROM into your computer’s CD-ROM
drive.
69
NOTE
• If the shared folders or files are not displayed on
the player, click the folder on the [Local Folders]
tab and click [Rescan Folder] at the [More]
button.
• Visit www.nero.com for more information and
software tools.
6. Click [Typical] and click [Next]. The
installation process is started.
7. If you want to take part in the anonymous
collection of data, select the check box and
click the [Next] button.
8. Click the [Exit] button to complete the
installation.
HX995TZ-FD.BMYSLL_ENG_0059.indd 69
10. 11. 02
10:51
70
Operation
Accessing a share folder from
your PC
NOTE
• The file requirements are described on page 11.
1. Start your PC that connected on your local
area network.
• You can use various playback functions. Refer to
pages 46-55.
2. On your PC, share folders which contain
movie, photo or music files.
• The thumbnail of the unplayable files can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
3. On the player, check the network
connection and settings (page 31).
4. Press HOME (
• If there is an unplayable music file in the [Home
Link] menu, the player skips the file and play
next file.
).
• The subtitle file name and movie file name have
to be the same and located at the same folder.
5. Select [Home Link] using I/i, and press
ENTER ( ).
• The playback and operating quality of the
[Home Link] function may be affected by your
home network condition.
6. Select a share folder from the list using U/u,
and press ENTER ( ).
• The files on an removable media such as USB
drive, DVD-drive etc. on your PC may not be
shared properly.
4
Operation
• You may experience connection problems
depending on your PC’s environment.
PC requirements
If you want to rescan available media
servers, press the green(G) coloured button.
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
Windows 7®
•
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
NOTE
Depending on the share folder, this player may
need to input network user ID and password for
accessing the folder.
7. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
HX995TZ-FD.BMYSLL_ENG_0059.indd 70
NOTE
If you use Windows® XP or Windows Vista®, visit link
below for more information on file share settings.
10. 11. 02
10:51
Operation
Entering a network user ID and the
password
Depending on your PC’s environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the keyboard menu.
71
3. When you finish entering the network user
ID and password, select [OK] using U/u/I/
i and press ENTER ( ) to access the folder.
The network user ID and password will
be remembered after accssing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (R) coloured button
to un-tick the [Remember] check box
before accessing the folder.
To enter a letter with an accent mark, select
the letter from extended character set.
Example: Select “D” and then press INFO/
DISPLAY ( ) to display the extended
character set. Use I/i to select “D” or “Ď”
and then press ENTER ( ).
4
Operation
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
HX995TZ-FD.BMYSLL_ENG_0059.indd 71
10. 11. 02
10:51
72
Operation
Using NetCastTM
Entertainment Access
YouTube
You can use various content services via
Internet with NetCast Entertainment Access
feature.
Watch YouTube videos on your TV
1. Check the network connection and settings
(page 31).
2. Press HOME (
).
3. Select the [NetCast] using I/i, and press
ENTER ( ).
4. Select an option using I/i, and press
ENTER ( ).
You can browse, search and watch YouTube
videos over the internet on your TV via your LG
Blu-ray disc™ player.
1. On the player, select the [YouTube] option
in the [NetCast] menu using I/i, and press
ENTER ( ).
2. Press U to select the option menu bar.
3. Use I/i to select an option and press
ENTER ( ) to search for videos.
4. Use I/i to select a video and press ENTER
( ) or N (play) to play the video.
Button
4
YouTube – See page 72
Operation
Picasa Web Albums – See page 76
AccuWeather – See page 79
5. While enjoying on-line content from
NetCast, press blue (B) coloured button to
go to NetCast Home screen.
B or ENTER Starts playback of the video
with content detail.
INFO/
DISPLAY
Toggle between playback in
full screen and playback screen
with content detail.
X
To pause a video while it is
playing. To resume playing a
paused video, press B again.
x
Stops the video and displays
related videos list.
./>
Skip the playback forward or
backward .
NOTE
• The content of NetCast services and service
related information, including user interface, is
subject to changes. Please refer to the web site
of each service for most up-to-date information.
Operation
• The background image on the NetCast home
indicates the weather of your favorite city in the
AccuWeather feature.
HX995TZ-FD.BMYSLL_ENG_0059.indd 72
10. 11. 02
10:51
Operation
73
About the YouTube menu
There are various options on the YouTube
menu. Use U/u/I/i to select an option
and press ENTER ( ) to select the options as
described below.
Featured – The featured videos list will be
displayed.
Recent Videos – The most recently updated
videos list will be displayed.
Most Viewed – The most viewed videos list
will be displayed. The period option appears
at the bottom of the screen.
Top Rated – The best rated videos list from
YouTube server will be displayed. The period
option appears at the bottom of the screen.
Search – The virtual keyboard will be
displayed. See “Searching videos” on page 75 for
more detail.
Favorites – This option will only appear only
when the unit is in sign-in status. Displays the
videos list that is arranged in the YouTube
server with your account. Some videos may
not appear on the [Favorites] list, even if the
videos are arranged in the server.
• The YouTube menu can display 5 videos in the
videos list. Press green (G) or yellow (Y) buttons
to display previous/next 5 videos.
• If you select the [Most Viewed] or [Top Rated]
option in the YouTube menu, the period options
appear at the bottom of the screen. Use U/u/
I/i to select a period option and press ENTER
( ) to display the videos list within the selected
period.
• The videos list located using this player may be
different from the list when searching via a PC.
• The playback of YouTube videos may be paused,
stopped or buffering occurring often depending
on your broadband speed.
We recommend a minimum connection speed
of 1.5 Mbps. For the best playback condition, a
connection speed of 4.0 Mbps is required.
Sometimes your broadband speed varies based
on your ISP’s network conditions.
Contact your ISP if you have problems
maintaining a fast connection that is reliable, or
if you want to increase your connection speed.
Many ISPs offer a variety of broadband speed
options.
4
Operation
History – The videos list that you previously
played on this unit will be displayed.
Maximum of 25 videos can be stored.
NOTE
Sign in (Sign Out) – Displays the virtual
keyboard to sign in or returns to the sign-out
status.
See “Sign in with your YouTube account” on
page 75 for more details.
Local site – Choose which country’s videos
you would like to view. The countries listed on
the [Local Site] menu may be different from
those listed on the YouTube web site.
HX995TZ-FD.BMYSLL_ENG_0059.indd 73
10. 11. 02
10:51
74
Operation
Using the virtual keyboard
Keypad Mode
On the virtual keyboard, there are two input
modes for the entering a character. Press
the yellow (Y) coloured button to toggle the
display between keyboard mode and keypad
mode.
This mode allows you to enter letters by
pressing the buttons on the remote control.
Press the buttons with the required letter once,
twice, three or four times until the letter is
displayed.
Keyboard Mode
Use U/u/I/i to select a letter on the screen,
and press ENTER ( ) to confirm your selection.
4
[Cancel] – Return to the previous screen.
Operation
[Space] – Inserts a space at the cursor
position.
[Backspace] – Deletes the previous character
at the cursor position.
[ABC / abc / #+-=&] – Changes the virtual
keyboard settings to capital letters, small
letters or symbols.
Press CLEAR to clear all entered characters.
Button
Operation
CLEAR
Deletes the previous character
at the cursor position.
REPEAT
Inserts a space at the cursor
position.
m/M
Change the character set of
the remote control (#+-=&,
123, ABC or abc)
NOTE
The keypad mode is available only in the [YouTube]
and [Picasa Web Albums] features.
To enter a letter with an accent mark:
1. Select a letter using U/u/I/i on the virtual
key board.
2. Press INFO/DISPLAY ( ) to display the
extended character set.
3. Use I/i to select a character then press
ENTER ( ).
Available languages to enter on the keyboard
mode are as follows: English, Spanish, Italian,
French, German, Dutch, Portuguese, Swedish,
Polish and Czech.
HX995TZ-FD.BMYSLL_ENG_0059.indd 74
10. 11. 02
10:51
Operation
You can search for videos by entering search
words of up to 128 characters.
3. When you finish entering the user name
and the password, select [OK] and press
ENTER ( ) to sign in.
1. Use I/i to select [Search] option from the
menu and press ENTER ( ) to display the
virtual keyboard.
4. If you want to sign out, select the [Sign Out]
from the YouTube menu and press ENTER
( ).
Searching videos
Refer to “Using the virtual keyboard” on
page 74 for using the virtual keyboard.
75
This unit can automatically store up to 5
username which were previously signed-in.
The user name list appears when you select
the [Sign In] option.
Select a stored user name on the list and press
ENTER ( ) to display the keyboard menu with
the selected user name entered. You will then
only need to enter the password to sign in.
When you are entering a character, a
maximum of 5 suggestion words will be
displayed.
4
Sign in with your YouTube account
Select the [X] symbol and press ENTER ( ) to
delete the stored user name.
Operation
2. When you finish entering the search words,
select [OK] and press ENTER ( ) to display
the related video list.
To watch videos from your [Favorites] video list
on the YouTube server with your account, you
need to sign in with your YouTube account.
1. Use I/i to select the [Sign In] option from
the menu and press ENTER ( ) to display
the virtual keyboard.
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the virtual keyboard.
Refer to “Using the virtual keyboard” on
page 74 for using the virtual keyboard.
HX995TZ-FD.BMYSLL_ENG_0059.indd 75
10. 11. 02
10:51
76
Operation
Picasa Web Albums
Enjoy photo albums from friends and family on
the Picasa Web Albums on-line service.
View Picasa Web Albums on your TV
1. On the player, select the [Picasa Web
Albums] option in the [NetCast] menu
using I/i, and press ENTER ( ).
Featured photos are displayed on the
screen.
2. Use U/u/I/i to select a photo and press
ENTER ( ) to view the photo in full screen.
4
Operation
Button
Operation
B
Starts a slide show.
INFO/
DISPLAY
Displays the photo option
menu.
X
Pauses a slide show. To resume
slide show, press B again.
x
Stops the slide show and
return to the Picasa Web
Albums menu.
I/i
Moves to the next or previous
photo.
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
2. Select an option using U/u.
a
b
c
d
e
f
g
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
c Add to NetCast Friends List – Add the
current photo owner to my friend list.
d Rotate – Press ENTER ( ) to rotate the
photo clockwise.
e Zoom – Press ENTER ( ) to display the
[Zoom] menu.
f Effect – Use I/i to select a transition
effect between photos in a slide show.
g Speed – Use I/i to select a delay time
between photos in a slide show.
3. Press RETURN (O) to exit the option menu.
HX995TZ-FD.BMYSLL_ENG_0059.indd 76
10. 11. 02
10:51
Operation
About the Picasa Web Albums menu
Adding friends
There are various options on the Picasa Web
Albums menu. Use U/u/I/i to select an
menu option and press ENTER ( ) to select
the options as described below.
If you add your friends on the [NetCast Friends]
menu, you can see the photos of your friend’s
public photos directly.
Home – The featured photo list will be
displayed.
NetCast Friends – List of your friends will be
displayed.
1. Select the [NetCast Friends] on the Picasa
Web Albums menu using U/u/I/i, and
press ENTER ( ).
2. Press ENTER ( ) to display the virtual
keyboard.
3. Enter a name using the virtual keyboard.
My Photos – Displays the photos organised in
my Picasa Web Albums. This option is available
only when the unit is in sign-in status.
4. Select [OK] using U/u/I/i, and press
ENTER ( ) to display the web album of
your friend.
Sign in (Sign Out) – Displays the virtual
keyboard to sign in or returns to the sign-out
status (page 78)
Refer to “Using the virtual keyboard” on
page 74 for using the virtual keyboard.
4
Operation
Search – Enter a search word to find related
photos. The virtual keyboard will be displayed
(page 78).
Favorites – Displays up to 50 favorite web
albums that are arranged in the Picasa Web
Albums server with your account. This option
is available only when the unit is in sign-in
status.
77
NOTE
• If you want to delete your friend from the list,
press green (G) coloured button while the web
album is selected.
• If you want to add more friends, press red (R)
coloured button on the list.
• You can add more web albums of your friends
up to 50.
NOTE
Photos displayed in [My Photos] and [Favorites]
may differ from the photos from a web browser on
PC.
HX995TZ-FD.BMYSLL_ENG_0059.indd 77
10. 11. 02
10:51
78
Operation
Searching photos
You can enter a search word to find related
photos.
1. Select the [Search] on the Picasa Web
Albums menu using U/u/I/i, and press
ENTER ( ).
2. Enter a search word using the virtual
keyboard.
Refer to “Using the virtual keyboard” on
page 74 for using the virtual keyboard.
3. Select [OK] using U/u/I/i, and press
ENTER ( ) to display the search result.
NOTE
4
The search result from the player may differ from
the result when searched from a web browser on
PC.
3. Enter the password using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
Your web album is displayed on the screen.
4. If you want to sign out, select the [Sign Out]
from the Picasa Web Albums menu and
press ENTER ( ).
This unit can automatically store up to 5 user
names which were previously signed-in. The
user name list appears when you select the
[Sign In] option.
Select a stored user name on the list and press
ENTER ( ) to display the virtual keyboard with
the selected user name is entered. You will
then only need to enter the password to sign
in.
Operation
Signing in with your account
To display photos in your web album on the
screen, you need to sign in with your Picasa
Web Albums account.
1. Select the [Sign In] on the Picasa Web
Albums menu using U/u/I/i, and press
ENTER ( ).
Select the [X] symbol and press ENTER ( ) to
delete the stored user name.
2. Enter your user name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
Refer to “Using the virtual keyboard” on
page 74 for using the virtual keyboard.
HX995TZ-FD.BMYSLL_ENG_0059.indd 78
10. 11. 02
10:51
Operation
Using the AccuWeather
79
5. Select a city using U/u/I/i, and press
ENTER ( ).
6. Use U/u/I/i to select [Home] and press
ENTER ( ) to display weather information
of the selected city.
See on-line local and global weather forecasts
from AccuWeather.com.
Viewing weather information
1. On the player, select the [AccuWeather]
option in the [NetCast] menu using I/i,
and press ENTER ( ).
The city selection menu appears on the
screen.
Press red (R) coloured button to toggle
display between Fahrenheit or Celsius
thermometre.
7. Use I/i to select previous or next city, and
press ENTER ( ) to display the weather
information.
NOTE
2. Press ENTER ( ) while [Add City to Favorite
City List] is selected.
• The weather information is not always correct.
3. Select a region using U/u, and press ENTER
( ).
• The weather information may be displayed in
English, if your own language is not available on
the AccuWeather service.
4
Operation
This step works only when you add more
than 1 city to the [Favorite city List].
4. Select a, country using U/u/I/i, and press
ENTER ( ).
HX995TZ-FD.BMYSLL_ENG_0059.indd 79
10. 11. 02
10:51
80
Operation
Adding more cities
1. Use I/i to select [Favorite City List] on the
AccuWeather menu, and press ENTER ( ).
2. Press ENTER ( ) while [Add City to Favorite
City List] is selected.
3. Select a region, country and city using
U/u/I/i and ENTER ( ).
4. Repeats step 2-3 to add up to 5 cities.
4
Select the [X] symbol and press ENTER ( )
to delete the stored favorite city.
Operation
5. Use U/u to select a city from the [Favorite
City List], and press ENTER ( ) to display
the weather information.
HX995TZ-FD.BMYSLL_ENG_0059.indd 80
10. 11. 02
10:51
Maintenance
81
5
Maintenance
Notes on Discs
Handling the Unit
Handling Discs
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Never stick paper or tape on the disc.
Storing Discs
Cleaning Discs
•
Do not use volatile liquids such as
insecticide spray near the unit.
•
Wiping with strong pressure may damage
the surface.
•
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
HX995TZ-FD.BMYSLL_ENG_0059.indd 81
5
Maintenance
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Keeping the exterior surfaces clean
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service Centre.
10. 11. 02
10:51
82
Troubleshooting
6
Troubleshooting
General
6
Troubleshooting
The Power does not turn
on.
•
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
•
Insert a playable disc. (Check the disc type, colour system,
and regional code.)
•
Place the disc with the playback side down.
•
Clean the disc.
•
Cancel the rating function or change the rating level.
The angle cannot be
changed.
•
Multi-angles are not recorded on the DVD Video being
played.
The subtitle language
cannot be changed or
turned off.
•
Subtitles are not recorded on the DVD Video being played.
Cannot play MP3/WMA/
JPEG/DivX files.
•
The files are not recorded in a format that the unit can play.
•
The unit does not support the codec of the movie file.
The remote control does
not work properly.
•
The remote control is not pointed at the remote sensor of
the unit.
•
The remote control is too far from the unit.
•
There is an obstacle in the path of the remote control and
the unit.
•
The batteries in the remote control are exhausted.
HX995TZ-FD.BMYSLL_ENG_0059.indd 82
10. 11. 02
10:51
Troubleshooting
83
Picture
There is no picture.
Picture noise appears
Blu-ray 3D™ disc playback
does not output 3D views.
•
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
•
Connect the video connection securely.
•
Check the [HDMI Color Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
•
Your TV may not support the resolution you have set on the
player. Change the resolution that your TV accepts.
•
The player’s HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
•
You are playing a disc recorded in a colour system that is
different from your TV.
•
Set the resolution which your TV accepts.
•
Connect the player to your TV with HDMI cable (Version 1.3
or higher).
•
Your TV may not support “HDMI 1.4 3D mandatory format”.
•
The [3D Mode] option in the [Setup] menu is set to [Off ].
Set the option to [On].
•
The unit is in scan, slow motion, or pause mode.
•
The sound volume is low.
•
Check the speaker cable connection. (page 25)
Sound
There is no sound or the
sound is distorted.
Troubleshooting
HX995TZ-FD.BMYSLL_ENG_0059.indd 83
6
10. 11. 02
10:51
84
Troubleshooting
Network
BD-Live™ feature does not
work.
6
•
The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
•
Ensure that the unit is correctly connected to the local area
network and can access the internet (see page 31).
•
Your broadband speed may not fast enough to use the BDLive™ features. Contact your Internet Service Provider (ISP)
and increase the broadband speed is recommended.
•
The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
Streaming video services
(such as YouTube, etc.)
are often stopped
or “buffered” during
playback.
•
Your broadband service speed may not be fast enough to
stream video services. Contact your Internet Service Provider
(ISP) and increase the broadband speed is recommended.
Shared folder or files from
your PC or a media server
are not displayed on the
[Home Link] menu.
•
The firewall or anti-virus software on your media server is
running. Turn off the firewall or anti-virus software running
on your PC or media server.
•
The player is not connected to the local area network that
your PC or the media server are connected.
Cannot connect the player •
to the access point or
wireless LAN router.
The wireless communication may be interrupted from
household devices that are using radio frequencies. Move
the player away from them.
Access point is not
displayed on the “Access
point name” list.
The access point or wireless LAN router may not broadcast
its SSID. Set your access point to broadcast its SSID through
your computer.
•
Troubleshooting
Design and specifications are subject to change without notice.
Customer Support
You can update the Player using the latest software to enhance the products operation and/or
add new features. To obtain the latest software for this player (if updates have been made),
please visit http://lgservice.com or contact LG Electronics customer care Centre.
HX995TZ-FD.BMYSLL_ENG_0059.indd 84
10. 11. 02
10:51
Appendix
1
85
7
Appendix
2
Controlling a TV with
the Supplied Remote
Control
3
You can control your TV using the buttons
below.
Setting up the remote to
control your TV
You can operate your LG/GoldStar TV with the
supplied remote control.
While holding down TV POWER button, press
PR/CH U/u. Release the TV POWER button to
complete setting.
When you replace the batteries of the remote,
you may have reset the remote control.
4
TV Control
Buttons
Operation
1 (TV Power)
Turn the TV on or off.
AV/ INPUT
Switch the TV’s input source
between the TV and other
input sources.
VOL +/-
Adjust the volume of the
TV.
PR/CH U/u
Scan up or down through
memorized channels.
Appendix
Button
7
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
HX995TZ-FD.BMYSLL_ENG_0059.indd 85
10. 11. 02
10:51
86
Appendix
Area Code List
Choose an area code from this list.
Area
Afghanistan
Appendix
7
Code Area
AF Fiji
Code Area
Code Area
Code
FJ Monaco
MC Singapore
SG
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
SK
Australia
AU France
FR Morocco
MA Slovenia
SI
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
GR Netherlands
GL Antilles
Bolivia
BO Greenland
Brazil
BR Hong Kong
Cambodia
KH Hungary
Canada
CA India
Chile
CL Indonesia
China
CN Israel
Colombia
CO Italy
Congo
CG Jamaica
Costa Rica
CR Japan
Croatia
HR Kenya
Czech Republic
CZ Kuwait
Denmark
DK Libya
Ecuador
EC Luxembourg
Egypt
EG Malaysia
El Salvador
SV Maldives
Ethiopia
ET Mexico
HX995TZ-FD.BMYSLL_ENG_0059.indd 86
HK New Zealand
HU Nigeria
IN Norway
ID Oman
IL Pakistan
IT Panama
JM Paraguay
JP Philippines
KE Poland
KW Portugal
LY Romania
LU Russian
Federation
MY
Saudi Arabia
MV
Senegal
MX
Spain
AN Sri Lanka
NZ Sweden
NG Switzerland
NO Taiwan
ES
LK
SE
CH
TW
OM Thailand
PK Turkey
TH
PA Uganda
PY Ukraine
UG
PH United States
PL Uruguay
US
TR
UA
UY
PT Uzbekistan
RO Vietnam
UZ
Zimbabwe
ZW
RU
VN
SA
SN
10. 11. 02
10:51
Appendix
87
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Afar
Code Language
Code Language
6565
French
7082
Lithuanian
Afrikaans
6570
Frisian
7089
Albanian
8381
Galician
7176
Ameharic
6577
Georgian
Arabic
6582
Armenian
7289
Assamese
6583
Aymara
6588
Azerbaijani
Code Language
Code
Sindhi
8368
Macedonian
7775
Singhalese
8373
Malagasy
7771
Slovak
8375
7565
Malay
7783
Slovenian
8376
German
6869
Malayalam
7776
Spanish
6983
Greek
6976
Maori
7773
Sudanese
8385
Greenlandic
7576
Marathi
7782
Swahili
8387
Guarani
7178
Moldavian
7779
Swedish
8386
6590
Gujarati
7185
Mongolian
7778
Tagalog
8476
Bashkir
6665
Hausa
7265
Nauru
7865
Tajik
8471
Basque
6985
Hebrew
7387
Nepali
7869
Tamil
8465
Bengali; Bangla 6678
Hindi
7273
Norwegian
7879
Telugu
8469
Bhutani
6890
Hungarian
7285
Oriya
7982
Thai
8472
Bihari
6672
Icelandic
7383
Panjabi
8065
Tonga
8479
Breton
6682
Indonesian
7378
Pashto, Pushto 8083
Turkish
8482
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkmen
8475
Burmese
7789
Irish
7165
Polish
8076
Twi
8487
Byelorussian
6669
Italian
7384
Portuguese
8084
Ukrainian
8575
Chinese
9072
Japanese
7465
Quechua
8185
Urdu
8582
Croatian
7282
Kannada
7578
8590
6783
Kashmiri
7583
Rhaeto-Romance
8277
Uzbek
Czech
Vietnamese
8673
Danish
6865
Kazakh
7575
Rumanian
8279
Volapük
8679
Dutch
7876
Kirghiz
7589
Russian
8285
Welsh
6789
8377
Wolof
8779
8365
Xhosa
8872
English
6978
Korean
7579
Samoan
Esperanto
6979
Kurdish
7585
Sanskrit
Estonian
6984
Laothian
7679
Scots Gaelic
7168
Yiddish
7473
7665
Serbian
8382
Yoruba
8979
Zulu
9085
Faroese
7079
Latin
Fiji
7074
Latvian, Lettish 7686
Serbo-Croatian 8372
Lingala
Shona
Finnish
7073
HX995TZ-FD.BMYSLL_ENG_0059.indd 87
7678
Appendix
7684
7
8378
10. 11. 02
10:51
88
Appendix
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to
a broadband home network. If there is new
software available and the unit is connected
to a broadband home network, the player will
inform you about the update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2. Use I/i to select a desired option and then
press ENTER ( ).
Option 2:
If the software update is available from the
update server, the “Update” icon appears at
the bottom of the Home menu. Press blue (B)
coloured button to start the update procedure.
Software Update
You can update the player using the latest
software to enhance the products operation
and/or add new features. You can update the
software by connecting the unit directly to the
software update server.
CAUTION
• Before updating the software in your player,
remove any disc and USB Device from the player.
• Before updating the software in your player, turn
the player off and then turn it back on.
• During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
• If you cancel the update, turn off the power and
turn it on for stable performance.
Appendix
• This unit cannot be updated to previous
software version.
[OK]
Starts the software update.
7
[Cancel]
Exits the update menu and displays it next
booting.
1. Check the network connection and settings
(page 31).
2. Select [Software] option in the [Setup]
menu then press ENTER ( ).
3. Select [Update] option, and press ENTER
( ).
[Hide]
Exits the update menu and it does not
appear until next software is uploaded in
the update server.
The player will check for the newest update.
HX995TZ-FD.BMYSLL_ENG_0059.indd 88
10. 11. 02
10:51
Appendix
NOTE
• Pressing ENTER ( ) while checking for the
update will end the process.
• If there is no update available, the Message,
“No update is found.” appears. Press ENTER ( )
to return to the [Home Menu].
4. If newer version exists, the message “A
new update was found. Do you want to
download it?” appears.
89
CAUTION
Do not turn off the power during the software
update.
9. When update is completed, the message,
“Update is complete.” will appear, and then
power will turn off automatically after 5
seconds.
10. Turn the power back on. The system now
operates with the new version.
NOTE
5. Select [OK] to download the update.
(Selecting [Cancel] will end the update.)
The Software Update function may not work
properly depending on your internet environment.
In this case, you can obtain the latest software from
the authorized LG Electronics Service Centre then
update your player. Refer to “Customer Support” on
page 84.
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your
home network condition)
Appendix
7. When downloading is completed, the
message, “Download is complete. Do you
want to update?” appears.
8. Select [OK] to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To
update software the next time, the software
update procedure has to be started from
the beginning again.)
HX995TZ-FD.BMYSLL_ENG_0059.indd 89
7
10. 11. 02
10:51
90
Appendix
Video output resolution
Video Out
Resolution
576i (480i)
576p (480p)
576p (480p)
576p (480p)
720p
720p
1080i
1080i
1080p / 24 Hz
1080p / 24 Hz
1080p / 50 (60) Hz
1080p / 50 (60) Hz
HDMI OUT connection
VIDEO OUT connection
•
For the 576i (480i) resolution setting, real
output resolution of HDMI OUT will change
to 576p (480p).
The resolution of the VIDEO OUT jack is always
outputted at 576i (480i) resolution.
•
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
•
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
•
The 1080p video output frame rate may
be automatically set to either 24 Hz or 50
(60) Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
Appendix
7
HDMI OUT
HX995TZ-FD.BMYSLL_ENG_0059.indd 90
10. 11. 02
10:51
Appendix
91
Trademarks and Licences
“Blu-ray Disc™” is a trademark.
“Blu-ray 3D™” and “Blu-ray 3D™” logo are
trademarks of Blu-ray Disc™ Association.
“BD-Live™” logo is a trademark of Blu-ray Disc™
Association.
“BONUSVIEW™” is trademark of Blu-ray Disc™
Association.
Manufactured under licence from Dolby
Laboratories. Dolby, Pro Logic, and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks of
the Digital Living Network Alliance.
Appendix
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under licence under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Master
Audio | Essential and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
7
The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
HX995TZ-FD.BMYSLL_ENG_0059.indd 91
10. 11. 02
10:51
92
Appendix
DivX is a registered trademark of DivX, Inc., and is
used under license.
“x.v.Colour” is a trademark of Sony Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
This product is licenced under the AVC patent
portfolio licence and VC-1 patent portfolio licence
for the personal and non-commercial use of a
consumer to (i) encode video in compliance
with the AVC Standard and VC-1 Standard (“AVC/
VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in
a personal and non-commercial activity and/or
was obtained from a video provider licenced to
provide AVC/VC-1 Video. No licence is granted
or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
iPhone is a trademark of Apple Inc.
“Made for iPod” and “Made for iPhone” mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone respectively, and has
been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod,
iPhone may affect wireless performance.
Gracenote®, Gracenote logo and logotype, and the
“Powered by Gracenote” logo are either registered
trademarks or trademarks of Gracenote, Inc. in the
United States and/or other countries.
Music recognition technology and related data are
provided by Gracenote®.
Portions of the content is copyright © Gracenote or
its providers.
Appendix
7
HX995TZ-FD.BMYSLL_ENG_0059.indd 92
10. 11. 02
10:51
Appendix
Specifications
93
Tuner
• FM Tuning Range:
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
General
• Power requirements:
AC 200 - 240 V, 50/ 60 Hz
• Power consumption:
25 W
• Dimensions (W x H x D):
Wall Mounted 580 x 199 x 54 mm
With stand 580 x 215 x 138 mm
• Net Weight (Approx.):
3.1 kg (With stand: 3.9 kg)
• Operating temperature:
41 °F to 95 °F (5 °C to 35 °C)
• Operating humidity:
5 % to 90 %
Amplifier
• Power output (4 Ω), (PEAK)
Total
1100 W
Front
180 W x 2
Centre
180 W
Rear
180 W x 2
Sub-Woofer
200 W (Active)
• Power output (4 Ω), (RMS), THD 10 % (4 Ω/ 3 Ω)
Total
980 W
Front
160 W x 2
Centre
160 W
Rear
160 W x 2
Sub-Woofer
180 W (Active)
Inputs/ Outputs
System
• VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
• Laser:
Semiconductor laser
Wavelength: 405 nm / 650 nm
• HDMI IN/OUT (video/audio):
19 pin (HDMI standard, Type A, Version 1.3)
• PORT. IN:
0.5 Vrms (3.5 mm stereo jack)
• Bus Power supply (USB):
500 mA
DC 5 V
• Signal system:
Standard NTSC/PAL colour TV system
• Frequency response:
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
• Signal-to-noise ratio:
More than 85 dB
Appendix
• DIGITAL IN (OPTICAL IN):
3 V (p-p), Optical jack
• Total harmonic distortion:
0.05 % at 1 W
• Dynamic range:
More than 90 dB
7
• LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
• Wireless LAN (internal antenna):
Integrated IEEE 802.11n (2.4 GHz band) wireless
networking access, compatible with 802.11b/g
Wi-Fi networks.
HX995TZ-FD.BMYSLL_ENG_0059.indd 93
10. 11. 02
10:51
94
Appendix
Speakers
• Front speaker (Left/ Right)
Type:
Impedance Rated:
Input Power:
Max. Input power:
Net Dimensions
(W x H x D):
Net Weight:
• Rear speaker (Left/ Right)
Type:
Impedance
Input Power:
Max. Input power:
Net Dimensions
(W x H x D):
Net Weight:
• Centre speaker
Type:
Impedance Rated:
Input Power:
Max. Input power:
Net Dimensions
(W x H x D):
Net Weight:
Appendix
• Subwoofer
Type:
Impedance Rated:
Input Power:
Max. Input power:
Net Dimensions
(W x H x D):
Net Weight:
Power requirements:
Power consumption:
Reception Output:
2 Way 3 speaker
4Ω
180 W
360 W
280 x 1212 x 195 mm
2.7 kg
2 Way 3 speaker
4Ω
180 W
360 W
280 x 1212 x 195 mm
2.7 kg
2 Way 3 speaker
4Ω
180 W
360 W
400 x 75 x 52 mm
0.55 kg
1 Way 1 speaker
3Ω
200 W
400 W
216 x 405 x 390 mm
9,3 kg
AC 200-240 V, 50/60 Hz
Refer to main label.
5.8 GHz
7
HX995TZ-FD.BMYSLL_ENG_0059.indd 94
10. 11. 02
10:51
Appendix
Important Information
Relating to Network
Services
PLEASE READ CAREFULLY. USE OF THE NETWORK
SERVICES IS SUBJECT TO THE FOLLOWING TERMS
AND CONDITIONS.
Use of the Network Services requires an Internet
connection which is sold separately and for which
you are solely responsible. The Network Services may
be limited or restricted depending upon the quality,
capabilities and technical limitations of your Internet
service.
The Network Services belong to third parties and
may be protected by copyright, patent, trademark
and/or other intellectual property laws. The Network
Services are provided solely for your personal and
noncommercial use. Unless expressly authorized by
the respective content owner or service provider,
you shall not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services accessible through this product.
HX995TZ-FD.BMYSLL_ENG_0059.indd 95
UNDER NO CIRCUMSTANCES AND UNDER NO
LEGAL THEORY, WHETHER IN CONTRACT, TORT,
STRICT LIABILITY OR OTHERWISE, SHALL LG BE
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,
CONSEQUENTIAL OR OTHER DAMAGES OR
ATTORNEY FEES OR EXPENSES RELATING TO OR
ARISING OUT OF THE NETWORK SERVICES EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
IF SUCH DAMAGES COULD HAVE BEEN REASONABLY
FORESEEN.
The Network Services may be terminated or
interrupted at any time, and LG makes no
representation or warranty that any Network Service
will remain available for any period of time. Use of the
Network Services may be subject to additional terms
and conditions of the respective third party service
provider. The Network Services are transmitted by
third parties by means of networks and transmission
facilities over which LG has no control. LG EXPRESSLY
DISCLAIMS ANY RESPONSIBILITY OR LIABILITY
FOR ANY INTERRUPTION OR SUSPENSION OF ANY
NETWORK SERVICE.
LG shall be neither responsible nor liable for
customer service related to the Network Services.
Any question or request should be made directly to
the respective Network Service providers.
“Network Service(s)” means the third party services
accessible through this product including but
not limited to all data, software, links, messages,
video and other content found thereon or used in
connection therewith.
“LG” means LG Electronics, Inc. its parent company
and all of their respective subsidiaries, affiliates and
related companies worldwide.
Appendix
LG IS NOT RESPONSIBLE FOR YOUR USE OF
THE NETWORK SERVICES. THE NETWORK
SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST
EXTENT PERMISSIBLE BY LAW, LG MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (i) FOR THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY
NETWORK SERVICE MADE AVAILABLE THROUGH
THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES
ARE FREE OF VIRUSES OR OTHER COMPONENTS
THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO
THIS PRODUCT, YOUR COMPUTER, TELEVISION,
OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
95
7
10. 11. 02
10:51
96
Appendix
Open source software
notice
Appendix
7
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo,
ffmpeg, iconv, libusb, mpg123, webkit
gSOAP Public License 1.3 LIBRARY: gsoap
LG Electronics offers to provide source code to
you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of
media, shipping and handling upon e-mail request
to LG Electronics at: opensource@lge.com
This offer is valid for a period of three (3) years from
the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/
gpl-2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .
Also you can obtain a copy of gSOAP public license
from http://www.cs.fsu.edu/~engelen/license.html.
This product includes
• boost C++: copyright © Beman Dawes 1999-2003
• c-ares : copyright © 1998 by the Massachusetts
Institute of Technology
• curl: copyright © 1996 - 2008, Daniel Stenberg
• expat: copyright © 2006 expat maintainers
• fontconfig: copyright © 2002 Keith Packard
• freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
• icu: copyright © 1995-2009 International Business
Machines Corporation and others
• jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane
• libxslt: copyright © 2001-2002 Thomas Broyer,
Charlie Bozeman and Daniel Veillard.
• mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
• ntp : copyright © David L. Mills 1992-2006
• openSSL:
– cryptographic software written by Eric Young
(eay@cryptsoft.com).
– software written by Tim Hudson
(tjh@cryptsoft.com).
– software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org)
HX995TZ-FD.BMYSLL_ENG_0059.indd 96
• pixman:
copyright © 1987, 1988, 1989, 1998 The Open
Group
copyright © 1987, 1988, 1989 Digital Equipment
Corporation
copyright © 1999, 2004, 2008 Keith Packard
copyright © 2000 SuSE, Inc.
copyright © 2000 Keith Packard, member of The
XFree86 Project, Inc.
copyright © 2004, 2005, 2007, 2008 Red Hat, Inc.
copyright © 2004 Nicholas Miell
copyright © 2005 Lars Knoll & Zack Rusin, Trolltech
copyright © 2005 Trolltech AS
copyright © 2007 Luca Barbato
copyright © 2008 Aaron Plattner, NVIDIA Corporation
copyright © 2008 Rodrigo Kumpera
copyright © 2008 André Tupinambá
copyright © 2008 Mozilla Corporation
copyright © 2008 Frederic Plourde
• png: copyright © 2004 Glenn Randers-Pehrson
• portmap : copyright © 1990 The Regents of the
University of California
• ptmalloc : copyright © 2001-2006 Wolfram Gloger
• UnitTest++ : copyright © 2006 Noel Llopis and
Charles Nicholson
• UPnP SDK : copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
• xml2 : copyright © 1998-2003 Daniel Veillard
• XML-RPC For C/C++:
copyright © 2001 by First Peer, Inc. All rights
reserved.
copyright © 2001 by Eric Kidd. All rights reserved.
• zlib: copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
associated documentation files (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
10. 11. 02
10:51
Appendix
Gracenote® End User
Licence Agreement
This application or device contains software from
Gracenote, Inc. of Emeryville, California (“Gracenote”).
The software from Gracenote (the “Gracenote
Software”) enables this application to perform disc
and/or file identification and obtain music-related
information, including name, artist, track, and title
information (“Gracenote Data”) from online servers
or embedded databases (collectively, “Gracenote
Servers”) and to perform other functions. You may
use Gracenote Data only by means of the intended
End-User functions of this application or device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You
agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any
third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY
PERMITTED HEREIN.
97
The Gracenote Software and each item of Gracenote
Data are licenced to you “AS IS.” Gracenote makes
no representations or warranties, express or implied,
regarding the accuracy of any Gracenote Data from
in the Gracenote Servers. Gracenote reserves the
right to delete data from the Gracenote Servers or to
change data categories for any cause that Gracenote
deems sufficient. No warranty is made that the
Gracenote Software or Gracenote Servers are errorfree or that functioning of Gracenote Software or
Gracenote Servers will be uninterrupted. Gracenote
is not obligated to provide you with new enhanced
or additional data types or categories that Gracenote
may provide in the future and is free to discontinue
its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE OBTAINED BY
YOUR USE OF THE GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
© Gracenote, Inc. 2009
Appendix
You agree that your non-exclusive licence to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your licence terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for any
payment to you for any information that you provide.
You agree that Gracenote, Inc. may enforce its rights
under this Agreement against you directly in its own
name.
7
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose of
a randomly assigned numeric identifier is to allow
the Gracenote service to count queries without
knowing anything about who you are. For more
information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
HX995TZ-FD.BMYSLL_ENG_0059.indd 97
10. 11. 02
10:51
HX995TZ-FD.BMYSLL_ENG_0059.indd 98
10. 11. 02
10:51
Download PDF

advertising