LG | LH-D6230A | LG LH-D6230A Owner’s Manual

LH-D6247D_JA6GLLS_ENG
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-D6247
(Main Unit: LH-D6247D,
Speakers: LHS-D6247T, LHS-D6247W)
CD-R/RW
Before
connecting up, operating
please
read this instruction booklet
or
repairing
carefully
this
and
product,
completely.
P/N: 3834RH0045P
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION:
This DVD/CD receiver
To
employs
a
Laser
System.
proper
product, please read this owner's
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
ensure
use
of this
manual
unit
tion
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
the
apparatus.
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed by
Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
to others. You should
This
product
is manufactured to
radio interference
DIRECTIVE
73/23/EEC.
2
requirements
comply
with the
retain this
of EEC
89/336/EEC, 93/68/EEC and
Model No.
Serial No.
guide
as a
unique to this unit and not available
record requested information here and
permanent record of your purchase.
___________________________________
___________________________________
Ta ble of Contents
Audio CD and MP3/WMA Disc
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
Operation
PlayingAudioCDsorMP3/WMADiscs
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
22-23
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
.22
Pause.............................23
BeforeUse..............................4-5
Precautions.............................5
SelectingTracks......................23
RepeatTrack/All/Off...................23
NotesonDiscs..........................5
Search.............................23
PlayableDiscs...........................4
RepeatA-B.........................23
AboutSymbols..........................5
Front Panel Controls and Display Window
3DSurround........................23
AudioChannelSelection...............23
Indicators.................................6
RemoteControlOverview....................7
RearPanelConnections.....................8
JPEGFileOperation.......................24
ViewingJPEGFiles......................24
SelectingFiles.......................24
StillPicture.........................24
Preparation
FlippingthePicture...................24
RotatingthePicture...................24
Connections............................9-13
AM-FMAerialConnections.................9
NotesonJPEGFiles..................24
TVConnection..........................10
ProgrammedPlayback.....................25
Audio CD and MP3/WMA Disc Programmed
Playback..............................25
.25
VideoCDProgrammedPlayback.
SpeakerSetup............................26
.11
ExternalEquipmentConnection.
.12
SpeakerSystemConnections.
SpeakerPlacement......................13
BeforeOperation.......................14-18
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Mode.................................14
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-18
InitialSetup.........................16
Language..........................16
.
.
.
.
.
.
.
.
.
.
AdditionalInformation......................26
LastConditionMemory...................26
SystemSelect..........................26
RadioOperation........................27-29
Presettingtheradiostations................27
Listeningtotheradio.....................27
SleepTimerSetting......................28
Dimmer...............................28
Picture.............................16
Mute.................................28
SpeakerSetup.......................17
UsingHeadphoneJack...................28
RDSOperation.........................28
ProgrammeSearch(PTY).................29
Others.............................17
ParentalControl......................18
Operation
Reference
.19-21
DVDandVideoCDOperation.
DVDandVideoCDPlayback...............19
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures........................19
TITLESelection......................19
CHAPTER/TRACKSelection.
.
.
.
.
.
.
.
.
.
.
.19
Search.............................19
Still Picture and
Frame-by-Frame Playback
LanguageCodeList.......................30
CountryCodeList.........................31
Troubleshooting........................32-33
Specification
.
About the
20
symbols
for instructions
SlowMotion.........................20
Indicates hazards
Repeat............................20
RepeatA-B.........................20
itself
TimeSearch........................20
Indicates
special operating
Indicates
tips
or
likely to cause
damage.
harm to the unit
other material
features of this unit.
3DSurround........................20
Zoom..............................21
MarkerSearch.......................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
CameraAngle.......................21
AudioLanguageSelection..............21
AudioChannelSelection...............21
Subtitles...........................21
and hints for
making
the task easier.
Manufactured under license from
Dolby Laboratories. "Dolby",
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
"Pro
Logic",
and the double-D
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
addition, this unit
can
play
a
DVD±R, DVD±RW,
Kodak PICTURE CD and CD-R
audio
titles, MP3, WMA
or
or
CD-RW that contains
JPEG files.
Depending
ment
itself,
or
--
the conditions of the
the CD-R/RW
some
cannot be
--
on
CD-R/RW
played
on
recording equip(or DVD±R, DVD±RW) disc
(or DVD±R, DVD±RW) discs
Do not
CDs
or
malfunctions.
use irregularly shaped
octagonal). It may result in
on
feature content
enabling
easily.
(Video
Sections of
a
CD and audio CD
picture
or a
audio CD. Each track is
or an
enabling
only)
piece on a video CD
assigned a track number,
musical
you to locate the track you want.
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
otes
accompanying
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
otes
--
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
In
(DVD only)
DVD
(the
(e.g., heart-shaped
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs may
intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playbe
back features of the unit may not be available or other
functions may be added.
Make sure to also refer to the instructions supplied with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
Regional
played
on
the unit.
code of the DVD/CD receiver and DVDs
This DVD/CD receiver is
designed
and manufactured for
playback of region "2" encoded DVD software.
region code on the labels of some DVDs
2
indicates which type of player can play those
discs. This unit can only play DVDs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
The
Types
There
of video CDs
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be disturbed
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
such
as
the unit. Do not leave rubber
leave marks
Cleaning
a
discs
Fingerprints
or
and dust
on the disc can distort the picture
quality. Before playing, clean the disc
cloth. Wipe the disc from the centre out-
reduce sound
with
a
clean
wards.
on
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
the unit
To clean the cabinet
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzene,
or
use
thinner,
are
moistened with
lightly
strong
as
a
extremely dirty,
mild detergent
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
a
clear
picture
The DVD/CD receiver is
a high-tech, precision device. If
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use (This depends on the
operating environment.).
For details, please contact your nearest dealer.
the
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
get
Handling
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DV D.
Video CDs with the PBC
(playback control)
function.
VCD1.1
Do not touch the
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG files
on a
disc.
5
INTRODUC
Front Panel Control and
Display Window
STANDBY/ON
Indicators
OPEN/CLOSE
VOLUME
STANDBY indicator
FUNCTION/
Lights red when the receiver
is in Standby mode (off).
PLAY
DISC
controller
DISPLAY
Remote
Window
Tray
sensor
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
TUNING
(DOWN/UP)/
SKIP/SCAN
Indicates current
Indicates current
surround mode
or
PHONES
connector
chapter
track number
Indicates current
audio stream
Repeat playback
Indicates current
mode indicators
function:
player
Playback, Pause,
MEMORY
indicator
TUNED indicator
etc.
STEREO indicator
Programmed
playback active
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
RDS Data
type indicators
DVD DVD disc loaded
VCD Video CD loaded
SVCD
Super
Video CD loaded
MP3 MP3 disc loaded
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control Overview
OPEN/CLOSE
POWER
(p. 19)
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNC./PLAY
the front
on
panel.
Press and hold down this button
about 3
seconds, then press
repeatedly
NUMBER
SLEEP
to select other function.
(p. 28)
SUBTITLE
PRO LOGIC II
(p. 14)
AUDIO
(p. 14)
(p. 14)
(p. 16)
SOUND
SETUP
(p. 21)
RETURN
(p. 19)
DISPLAY
(p. 15)
ENTER
TITLE
ARROW
For
use
on a
GUI
in
highlighting
menu
a
MENU
the
menu screen
included
on
screen
included
DVD video discs.
SLOW SCAN
(p. 21)
display
on
the title
display
screen, TITLE and
MENU screen.
Use the MENU button to
(p. 21)
Use the TITLE button to
selection
(Q
/
R)
(p. 20)
DVD
video discs.
VOLUME
(+/-)
PRESET(+/-) (p. 27)
SKIP/SCAN
STOP
PAUSE/STEP
(p. 20)
MUTE
PLAY
(
) (p. 19)
/
(p. 28)
PROGRAM
(p. 25)
(p. 21)
REPEAT (p. 20, 23)
REPEAT A-B (p. 20, 23)
CLEAR
MARKER(p.
(p.
ANGLE (p.
ZOOM (p.
SEARCH
RDS
PTY
PTY SEARCH
Remote Control
21)
21)
21)
21)
DIMMER
(p. 28)
(p. 29)
(p. 29)
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
remote
Angle:
battery
installation
Remove the
the buttons.
Distance: About 23 ft
(p. 28)
battery
of the remote
(7 m)
from the front of the
cover on
R03
(size AAA) batteries
aligned correctly.
sensor
the
control, and insert
with
rear
two
and
About 30° in each direction in front of the remote
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
INTRODUC
Rear Panel Connections
SPEAKER Connectors
FM 75Ω Antenna Connector
AUXILIARY INPUT Connectors
S-VIDEO OUT
Connector
S/VIDEO OUT
MONITOR OUT
MONITOR OUT
Connector
AM Antenna Connectors
POWER CORD
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
Connections
AM-FM Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
loop aerial to the AM aerial connector.
Connect the AM
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
PREATION
(supplied)
(supplied)
S/VIDEO OUT
MONITOR OUT
otes
To
prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components.
Be
sure
After
to fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
as
horizontal
as
possible.
9
Connections
(Continued)
TV Connections
Rear of TV
S-VIDEO
SCART INPUT
VIDEO
INPUT
AUDIO INPUT
INPUT
L
R
L
VIDEO Cable
V
S
T
Back of the DVD/CD receiver
SCART-RCA
Adaptor
TV/MONITOR
(SCART type)
S/
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
of your
to
Connect the MONITOR OUT
cable
on
your TV and other equipment you wish
are various ways you could connect
connect, there
the DVD/CD receiver. Use
one
of the connections
MON
ROUT
Video connection
receiver to the VIDEO IN
ips
Depending
OUT
jack
jack
on
the DVD/CD
on
the TV
using
the video
(V).
S-Video connection
described below.
Connect the S-VIDEO OUT
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
er
to the S-VIDEO IN
cable
jack
jack
on
on
the DVD/CD receiv-
the TV
using
the S-Video
(S).
best connections.
Caution
--
Make
sure
the DVD/CD receiver is connected
to the TV. Select the correct AV
--
directly
input on your TV.
Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
ip
If you want to connect the DVD/CD receiver to a TV with
SCART socket, use the SCART-RCA adapter (T).
otes
The
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
When you connect the DVD/CD receiver to your TV,
be sure to turn off the power and unplug both units
from the wall outlet before
10
making
any connections.
Connections
External
(Continued)
Equipment Connections
Rear of VCR
(or
LD
AUDIO OUTPUT
L
player, etc)
PREATION
VIDEO
OUTPUT
R
S/VIDEO OUT
MONITOR OUT
Connection
Connect the AUX IN
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
ip
Press AUX
on
the remote control to select
input
to these
jacks.
AUX appears
on
the
Display
Window.
11
Connections
(Continued)
Speaker System Connections
Connect the
speakers using
To obtain the best
possible
Front
the
supplied speaker
surround
Center
speaker
(Right)
cords.
sound, adjust the speaker parameters (volume, distance, etc.).
Front
speaker
(Left)
speaker
S/VIDEO OUT
Rear speaker
(Right surround)
MONITOR OUT
Rear speaker
(Left surround)
Subwoofer
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
use
Do not
12
front
remove
speakers
the front
with low maximum
cover
of
input rating, adjust
supplied speaker.
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
Speaker
In the
Placement
of normal
case
(Continued)
position
use
the 6
speakers (2
front
speakers,
centre
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
subwoofer.
play
the excellent bass
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
a
?F
r ont speakers
According to your listening position
speakers to 45 degree.
?
Centre
speaker
speakers
The centre
?
and front
set up the
speakers
are
for
speakers
ideally
the
equal
same
distance. And
height.
But
by hearing position
normally place
it above
or
set up the interval between
below the television.
Rear
speakers
right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
Place left and
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
size, if the audience is
90
than the listener's
-
cm
near
to the
rear
wall set the
rear
speakers opposite
each
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Speaker
(Left)
Speaker
Front
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Mini
Operation
for Audio Stream &
Glossary
right speakers and subcompletely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer.
woofer. Standard two channel
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and
compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
tional
identical to the
clarity
term DTS is
original masters) and results in excepthroughout a true 360 degree sound field. The
trademark of DTS
a
(2CH STEREO)
the sound from the front left and
Outputs
Surround mode
means
BYPASS
LLC.
Technology,
Technology,
Manufactured under license from DTS
LLC.
(stereo)
sources
Sound Mode
You
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
A) By pressing
SOUND button
Each time you press SOUND button, the sound mode is
in the following order;
changed
The
PRO LOGIC
channels of
→ROCK→POP→LIVE→DANCE→TECHNO→
Dolby Digital surround format lets you enjoy up to 5.1
digital surround sound from a Dolby Digital promark, you can enjoy
gram source. If you play DVDs with
even better sound quality, greater spatial accuracy, and
improved dynamic range.
"
"
CLASSIC
PLII MOVIE
→
SOFT
→
→
→
PLII MUSIC
3D SURROUND
→
→
PLII MATRIX
BYPASS
...
ips
ROCK:
Reproduces the acoustics of rock music.
Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
POP:
Use this mode when
which carries the
playing
"
"
movie
or
Dolby Digital 2 channel
provides the effect
mark. This mode
of
being in a movie theatre or live concert house-an effect with
intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
music.
an
CLASSIC:
Reproduces
the acoustics of orchestral
music.
SOFT: Ideal for soft acoustic sounds.
ic than before.
B) By pressing
(II)
Dolby
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
MOVIE mode:
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
provides
a
Each time you press
PL II button, the sound mode
changed in the following order;
is
PRO LOGIC
→
PLII MATRIX
(This
→
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
function available 2-channel mode
only)
When DVD is inserted.
The Movie mode is for
and
PL II button
use
wide and
with any stereo music recordings,
sound space. The Music mode
deep
You
can
PRO
change
the sound mode of DVD
(Dolby Digital, DTS,
LOGIC, etc) by pressing the AUDIO button
on
the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
includes controls that allow the sound to be tailored to individual
listening
→→→
tastes.
MATRIX mode:
The Matrix mode is the
the Music mode except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The Matrix
mode may also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause disturbing
surround signals from a logic decoder. The ultimate "cure" for
poor FM stereo reception may be simply to force the audio to
same as
directional enhancement
mono.
For your reference
?
The DVD/CD Receiver memorizes the last mode
settings
?
for each source
individually.
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
You
can
-
-
3D SURROUND
This unit
produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
can
audio from
a
encoded with
home theatre. This feature works with DVD discs
Dolby
Pro
Logic
and
Dolby Digital
audio tracks.
-
ote
Sound Mode is not
applicable
when
headphone
is used.
Before
General
This manual
Operation (Continued)
Explanation
operating the
DVD/CD receiver. Some DVDs require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by the
gives
DVD/CD receiver
basic instructions for
or
is not available
Press 1/2 to
3
on
numbers
General
screen.
playback
status
On-screen
can
Repeat
TITLE
the disc.
be displayed on the TV
changed on the menu.
ALL
AB
OFF
display operation
1
2
during playback.
Press 3/4 to select
an
The selected item will be
an
item.
For
number).
some
setting
functions,
setting.
Title
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
Resume
Press DISPLAY
of
Repeat Chapter
TRACK
can
be
title
setting
be also be used for
Playback Status Displays
Display
Some items
(e.g.,
the
can
press ENTER to execute the
CHAPT
On-Screen
change
The number buttons
Action
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
item.
otes
highlighted.
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1 ENG
and
Subtitle
language
Angle
5.1 CH
ABC
OFF
1/1
Sound
VCD2.0
D
BYPASS
to the desired title number.
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the
point directly
from the
elapsed
time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
the
setting.
Shows the current subtitles language, and
changes
the
setting.
1/2,or
Numbers, ENTER
1/2,or
Numbers, ENTER, SKIP
Numbers, ENTER
1/2,or
AUDIO
1/2,or
SUBTILE
Shows the current angle number and total number of
angles, and changes the angle number.
1/2,or
Shows the current sound mode, and
1/2,or
changes
the
setting.
ANGLE
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
STER.
BYPASS
Selection Method
1 /2,or
Numbers, ENTER
Shows the elapsed playing time (Display only)
Shows the audio channel, and
Audio Channel
Sound
titles, and skips
Selection Method
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
--
1
/2,or
AUDIO
1
/2,or
SOUND
15
PREATION
Before
Initial
Operation (Continued)
Language
Setup
You
can set your own Personal Preferences
DVD/CD receiver.
on
the
Disc
Language
Select
DVD
language
a
for the disc's
Menu, Audio, and
Subtitle.
Initial
1
Settings
General
Operation
Press SETUP.
The
setup
menu
appears.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 30. If you enter the wrong language
Original
:
The
Other :To select another
code, press CLEAR.
Original
Disc Audio
Disc Subtitle
English
Disc Audio
Disc Menu
Spanish
Disc Subtitle
English
Rating
German
Disc Menu
Spanish
Rating
German
Country
TV
Italian
Code
Portuguese
Aspect
Menu
Country
Greek
Language
TV
French
Original
Italian
Code
Portuguese
Aspect
Menu
Greek
Language
Chinese
5.1
French
Other--------
Speaker Setup
Chinese
Others
5.1
Other--------
Speaker Setup
Others
2
Press 3/4 to select the desired item.
The
screen
selected
3
4
will show the current
item,
as
well
as
setting for the
setting(s).
alternate
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
Menu
Select
you
Language
language
a
see
Press ENTER to confirm your selection.
Some items require additional steps.
5 setup
SETUP, RETURN,
or
setup
menu.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
German
Rating
Italian
Country
TV
This is the
menu
Por tuguese
Code
Greek
Aspect
Menu
Press
for the
when you press SETUP.
Language
PLAY to exit the
menu.
5.1
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
16:9 Wide: Select when
a
sides of the
16:9 wide TV is connected.
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
5.1
Code
Aspect
Menu
Language
Speaker Setup
Others
16
style (Both
cut
Before
Operation (Continued)
Speaker setup
5.1
Auto
Speaker settings
You
DVD
Play
can
DVD
set up the DVD/CD receiver so a DVD disc
starts playing whenever the DVD is insert-
automatically
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.)
ed.
If Auto
Play
will search
play
mode is set to
a
back the title
On: Auto
Off: Auto
Play
Play
On, this DVD/CD receiver
title that
playback time
automatically.
is
longest
and then
function is activated.
function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
Country
TV
Code
ote
Volume
Play
function may not work for
some
DVDs.
Small
Distance
Language
The Auto
0dB
Size
Aspect
Menu
R
Front L
Rating
0.3
m
Test
Return
5.1
Speaker Setup
Others
Others
The
DRC, Vocal, PBC and Auto Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
5.1
On
Play
Language
Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
at
a
quietest ones). Then, you may listen to a movie
losing clarity of sound. Set
lower volume without
DRC to On for this effect.
Vocal
Set Vocal to On
is
playing.
only
when
a
multi-channel karaoke DVD
The karaoke channels
on
the disc will mix
into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
17
PREATION
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
applies
able for selection
to the
complete
the disc. These
scenes on
8, and alternatively,
1 to
not suitable for
scenes
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
more
on some
suitable
discs.
disc
scenes are
Ratings
avail-
Country
TV
6
5
Rating
1
4
Code
3
Aspect
Unlock
Speaker Setup
1
Select
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
on
the
Setup
menu
using
the
3/4 buttons.
"Rating"
Select
using
the 3/4 buttons
on
menu.
Code is selected, press 2.
Country
2
step
3
Select
4
3 of
"Rating"
the first character
Shift the
is selected, press 2.
Code
Country
the setup
Follow
Change
Others
"Rating"
Speaker Setup
While
2
Language
1
5.1
Language
Others
Disc Menu
Menu
Code
Aspect
Menu
5.1
7
TV
GR
Rating
are
8
Disc Subtitle
Country
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
to the list
List", page 31.).
Disc Subtitle
The Parental Control feature allows
country-dependent.
disc, referring
Disc Audio
rated from
whose standards
country/area
Code
(See "Country
to
or
scenes are
a
used to rate the DVD video
using
cursor
on
left.
using
the 3/4 buttons.
2 button and select the
5 second character using buttons.
Press
confirm your country code
6 selection, then press SETUP
exit the
3/4
ENTER to
to create
a
personal 4-digit security password. then
4-digit password again and
press ENTER. Enter the
press ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered but-
below.).
tons to confirm the
Changing
personal 4-digit security
pass-
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
Select
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
If
will not be
is available
The alternative must have the
lower
same
on
rating
played
the disc.
or a
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
no
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
5
ote
This function may not work for
18
the
1
Follow
Enter the old
3
Select
Steps
4-digit
1-2
is necessary when
the 4-digit code"
code
shown above to the left
as
(Rating).
code, then press ENTER.
Change using
3/4 buttons then press
ENTER.
4
5
Enter the
ENTER.
Enter
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
time and veri-
6
Press SETUP to exit the
menu.
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
4-digit password
changed (see "Changing
2
a
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
menu.
ote
Confirmation of the
the code is
word, then press ENTER.
4
to
some
DVDs.
If you
If you
forget your 4-digit
forget
your
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
The
3
4-digit password
Enter
a new
(Rating).
code
is cleared.
as
shown above to the left
DVD and Video CD
DVD and Video CD
Playback Setup
Tu rn
on
Operation
General Features
Playback
VCD2.0
DVD
the TV and select the video
VCD1.1
input
ote
source con-
the
1
system: Turn
input
source
on
the audio
system and select
TITLE Selection
Load
When
chosen disc in the tray, with the
facing down.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
automatically.
If
playback
press PLAY.
In some cases, the disc
menu
playback
If
a menu screen
is
DVD
or
more
than
one
title, you
to
can move
follows:
Press
DISPLAY, then press the appropriate number
(0-9)
to select
Press 1 2 to select
When
displayed
may be displayed first after
Video CD which offers a menu.
as
button
DVD
menu screen
disc has
title number.
a
a
title, then press ENTER.
CHAPTER/TRACK Selection
appear
instead.
The
a
another title
does not start,
might
DVD
1/3
side
starts
use
connected to the DVD/CD receiver.
Press OPEN/CLOSE to open the disc tray.
your
2 playback
3
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
nected to the DVD/CD receiver.
Audio
Unless stated
loading
a
1 /12
VCD1.1
a
disc has
title
on a
more
chapter/track
disc has
than
as
1/3
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
Press SKIP/SCAN .or >
DVD
Use the 1 234 buttons to select the
want to
view, then press ENTER
Press TITLE
or
title/chapter
playback.
you
to start
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
and the exact
menu screen.
operating procedures
for
using
may differ depending on the disc.
Follow the instructions on the each menu screen.
1
ote
setup. See page
For
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
(see
Control",
page 18).
--DVDs may have a region code.
Your receiver will not play discs that have
a region
region code
DVD
VCD2.0
VCD1.1
1 Press and hold SKIP/SCAN .
two seconds
or
> for about
during playback.
The receiver will
now
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
on
code different from your receiver. The
this receiver is 2 (two).
the numbered buttons
two-digit numbers, press
(0-9)in rapid succession.
Search
otes
"Parental
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press
2 to select the chapter/track, then press ENTER.
menu
You also may set PBC to Off under
17.
--
briefly during playback
beginning of the current chapter/track
or to select the next chapter/track.
Press SKIP/SCAN . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
to return to the
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
to select the
for
3 To return to normal
play,
press PLAY.
19
OPERATION
DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
can
A*
To
during playback.
advance the
picture frame-by-frame by
repeatedly on the remote
PAUSE/STEP
press-
a
"
*
A
Slow Motion
press PLAY.
DVD
1 Press SLOW SCAN
-
VCD2.0
m
or
+
appears
briefly
briefly
begins ("
the TV
on
2 Press REPEAT A-B
Time Search
at your chosen end
again
on
starting point.
screen.
point.
the TV screen, and the repeat
appears the display window).
"
0:20:09
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
during playback.
The DVD/CD receiver will enter SLOW mode.
2UsetheSLOWSCAN-morM+toselectthe
1 Press DISPLAY
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
To return to normal play, press PLAY.
display
appears
during playback.
the
on
The
playing
at
on-screen
screen.
The Time Search box shows the
elapsed playing
time of the
current disc.
2 Within 10
seconds, press 3/4
Search icon in the
ote
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Slow motion
playback
in
is not
reverse
applicable
for
3 Within 10
Video CD.
the
seconds,
required
Repeat
CHAPT
VCD2.0
DVD
TITLE
TRACK
DVD Video Discs
repeat
the
the number buttons to enter
right
hours, minutes, and
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
OFF
4 Within 10
seconds, press ENTER
confirm the start time.
Repeat Chapter/Title/Off
-
use
start time. Enter
seconds from left to
1 To
title:
a
3 To cancel the sequence, press REPEAT A-B.
VCD1.1
M
sequence in
"
sequence
play,
VCD1.1
OFF
"A B" appears
control.
3 To return to normal
3
AB
repeat
VCD2.0
DVD
1 Press REPEAT A-B at your chosen
go into PAUSE mode.
now
A-B
Repeat
VCD1.1
The DVD/CD receiver will
ing
(continued)
Frame-by-frame playback
1 Press PAUSE/STEP
2 You
Operation
currently playing chapter,
Playback
an
press
invalid
starts from the selected time
or
on
press PLAY to
the disc. If you enter
time, playback will continue from the
current
point.
REPEAT.
The
2 To
icon appears
Repeat Chapter
on
the TV
3D Surround
screen.
repeat the title currently playing, press REPEAT
VCD2.0
DVD
VCD1.1
a
BYPASS
3D SUR
second time.
The
3 To
Repeat Title
e xit
The
icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
This unit
third time.
screen.
1 To
repeat
The
2 To
-
Repeat Track
repeat
the disc
press REPEAT.
currently playing,
icon appears
on
the TV
currently playing,
screen.
The
Repeat
e xit
The
All icon appears
Repeat mode,
Repeat
on
the TV
a
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
ote
On
a
setup
20
Video CD with
menu
to
use
PBC, you
the
Repeat
3D Surround
must set PBC to Off
on
function. See page 17.
the
effect, which
conventional stereo
instead of the five
speakers,
speakers normally required
a
to select "BYPASS".
or
to listen to
1 Press SOUND to select "3D SUR"
again
from two
home theater
2 To turn off the 3D Surround
press REPEAT
second time.
3 To
a
multi-channel audio from
Repeat Track/All/Off
the track
produce
playback
more
Video CDs
can
simulates multi-channel audio
system.
during playback.
effect, press SOUND
DVD and Video CD
General Features
Zoom
VCD2.0
DVD
Operation
(continued)
during playback
or
still
playback
the
repeatedly,
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
level
magnification
Or,
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
use
the 1 234 buttons to
highlight
your selection,
then press ENTER.
DVD
Title Menu
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
Marker Search
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
3 To
remove
menu
menu
will appear
the
on
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
a
memorized
point. Up
be memorized.
can
2 To
is
menu
remove
displayed.
the disc menu, press MENU
again.
mark, follow these steps.
a
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
a
Angle
If the disc contains
memorize.
The Marker icon will appear
2
The disc
to
angle
appears
on
the TV
a
screen.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
2 Within 10
press SEARCH.
menu
will appear
seconds, press 1/2
buttons to select
a
or use
on
the
Audio
screen.
the number
Marker number that you want to
recall.
will start from the Marked
Playback
remove
scene.
1
a
During
disc
playback,
The MARKER SEARCH
2
will appear
on
the
screen.
repeatedly during playback to hear
(STER., LEFT or RIGHT).
DVD
different subtitle
erase.
dif-
a
dif-
ABC
1 ENG
repeatedly during playback
languages.
to
see
the
ote
Press CLEAR.
If
The Marker number will be erased from the list.
4
a
VCD1.1
Press SUBTITLE
press SEARCH.
menu
to hear
Press 1/2 to select the Marker number that you want
to
3
Subtitles
Marked Scene
VCD2.0
5.1 CH
ferent audio channel
SEARCH.
To clear
repeatedly during playback
language or audio track.
Press AUDIO
the MARKER SEARCH menu, press
D
DVD
Press AUDIO
ferent audio
Audio Channel Selection
3 Press ENTER.
4 To
Language Selection
Repeat steps
2 and 3 to
erase
appears, the feature is not available
on
the disc.
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
21
OPERATION
Audio and MP3/WMA Disc
Operation
Notes
Playing Audio CD and MP3/WMA Disc
MP3
CD
MP3/WMA
can
play
An MP3 file is audio data
MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes
MP3/WMA Recordings on right.
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
on
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
files that have
on
The
player
About
the TV
can
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
technology.
WMA(Windows
compression of
MP3 WMA
MP3/WMA Disc
a
Microsoft audio
MP3 WMA
1.
Media
3.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Clear All
5.
OFF
00:00
3
4
Press 3/4 to select
ENTER.
as
A
Creator", which
single
track, it
to
Playback starts.
During playback,
track then press PLAY
creates
session disc
playback
File
elapsed playing
menu.
no
MP3/WMA
ISO9660 file
an
requires
system.
MP3/WMA files in the
MP3/WMA file in the 1st
playback
MP3/WMA files. If you wish
files, format all the data in
or use a new one.
names
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press MENU to
6.
cannot
and must
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
or
follows:
-
the disc
a
with this DVD/CD
compatibility
first track. If there is
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
offers double the audio
Audio)
-
CD
Folder7
Folder8
compression
-
4.
Program
file
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy32
2.
a
the MP3 format.
receiver is limited
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
MP3 file that has
an
".mp3".
WMA(Window Media Audio)
An WMA file is
JPEG
not read
extension other than
screen
2
Recordings
About MP3
WMA
The DVD/CD receiver
1
on
move
to the
previous
page.
This DVD/CD receiver
requires discs/recordings to meet
optimal
playback quality. Pre-recorded DVDs are automatically
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
set to these standards. There
TRACK 3.mp3
TRACK04
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
0: 56: 18
Audio CD
BYPASS
menu
Clear All
TRACK 8.mp3
00:00
1
If you
are
use
MP3/WMA
in
return to the
5
22
To
a
menu
file list and want to return to the Folder
the 3/4 to
and
highlight
previous menu screen.
stop playback
at any other
many different types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
ip
list,
are
of recordable disc formats
TRACK 4.mp3
TRACK05
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no right
grant such permission. Permission should always
to
be
sought
from the
copyright
owner.
Audio and MP3/WMA Disc
Operation (Continued)
Pause
Repeat
1 Press PAUSE/STEP
2 To return to
during playback.
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
The
Press SKIP/SCAN .
or
>
playback to go to the next track
beginning of the current track.
Press SKIP/SCAN . twice
In
of audio
case
briefly during
or
Repeat
icon and "A
step back
to
briefly
CD,
3 To
to
directly to any track, enter
the numbered buttons (0-9)
to go
using
Repeat
during playback.
press REPEAT A-B at your cho*
"
appears
again
1 To
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
on
the
menu
begins
to
play repeatedly.
e xit
the sequence and return to normal
REPEAT A-B again.
The
Repeat
icon and "OFF" appears
repeat all tracks
on a
disc, press REPEAT
a sec-
ond time.
The
Repeat
icon and "ALL" appears
the
on
on
the
play,
press
menu screen.
3D Surround
This unit
can
produce
a
3D Surround
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
2 To turn off the 3D Surround
again
or
system.
1 Press SOUND to select "3D SUR"
screen.
2 To
menu screen.
at your chosen end point.
on the menu screen,
simulates multi-channel audio
Repeat Track/All/Off
the
on
icon and "A B" appears
and the sequence
to return to the
track.
the track number
sequence.
2 Press REPEAT A-B
Selecting Tracks
previous
a
During disc playback,
sen starting point.
The
the
A-B
during playback.
effect, press SOUND
to select "BYPASS.".
menu screen.
Audio Channel Selection
3 To cancel
The
Repeat mode,
Repeat
press REPEAT
icon and "OFF" appears
on
the
a
third time.
menu screen.
Search
1 Press and hold SKIP/SCAN .
two seconds
during playback.
The
now
player
will
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed
and direction
are
indicated
screen.
3 To
e xit
SEARCH
mode, press PLAY.
on
the
menu
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
OPERATION
JPEG File
Operation
Viewing JPEG
This DVD/CD receiver
Files
Press SKIP/SCAN .
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
1
a
can
menu
appears
on
the
>
once
or
during viewing a
previous file.
to the
Still Picture
during
The DVD/CD receiver will
2 To return to the slide
screen.
or
to advance to the next file
picture
1 Press PAUSE/STEP
disc and close the tray.
The MP3/WMA-JPEG choice
TV
another File
Selecting
JPEG
PAUSE/STEP
slide show.
now
go into PAUSE mode.
show, press PLAY
or
press
again.
MP3 WMA
Flipping
JPEG
2
menu
appears
on
the TV
picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
to
flip
the
screen.
Rotating picture
JPEG
Folder1
Press 1/2
Folder2
Folder3
during showing
clockwise
picture
Folder4
or
a
picture
to rotate the
counter clockwise.
Folder5
Folder6
Folder7
Folder8
Slide
Speed
Notes
Off
JPEG Files
on
upon the size and number of the JPEG
a long time for the DVD/CD
Depending
3
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
list,
are
use
"
"
in
file list and want to return to the Folder
a
the 34 buttons
on
the remote to
and press ENTER to return to the
highlight
previous menu
screen.
If
want to view
you
4 highlight
a
particular file, press
file and press ENTER
the file proceeding starts.
a
or
Viewing
During viewing a file, press RETURN
previous menu (JPEG menu).
Press TITLE to
3/4 to
PLAY.
JPEG
to
move
to the
move
Folder1
Picture1.jpg
Picture2.jpg
are
too
big
---
reduce the resolution of the
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
ip
There
are
three
Normal, Slow,
Speed
viewing
Slide
Speed options: Fast,
highlight the Slide
select the option you want to
and Off. Press 1/2 to
then press 3/4 to
use, and press ENTER.
To
stop viewing
The JPEG
menu
at any other
appears.
pixels
Total number of files and folders
on
time, press STOP.
and burn anoth-
the disc should be
less than 650.
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as
Creator" to burn the jpeg files into the
when
copying
into the CD
If the files have
rename
File
them
names
CD
ensure
".jpg"
extensions
layout.
".jpe" or ".jpeg" extensions, please
".jpg" files.
without
by
files
shown
are
"Easy
CD-R,
as
be read
explorer.
Picture3.jpg
24
the files
that all the selected files have the
to the next page.
Press MENU to move to the previous page.
5
receiver to read the disc's contents. If you don't see
display after several minutes, some of
an on-screen
JPEG files to less than 2 mega
er disc.
ip
If you
files, it could take
".jpg"
extension will not be able to
this DVD/CD receiver. Even
as
JPEG
image
though
the
files in windows
Programmed Playback
CD
VCD2.0
Audio CD and MP3/WMA Disc
MP3
VCD1.1
Video CD
Programmed Playback
The
function enables you to store your favorite
tracks from any disc in the player memory.
during playback or in
the Program Edit mode.
Press PROGRAM
1
mode to enter
on
the stop
E
The
On
a
Video CD with
setup
menu
Program
contain 30 tracks.
can
Programmed Playback
ote
Program
Program
WMA
mark will appear to the right of the word
the right side of the menu screen.
Program
to
PBC, you
the
use
the
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
playback
is
stopped.
will appear.
Program
VCD
E
TRACK 1
Press PROGRAM to exit the
the
on
function. See page 17.
contain 30 tracks.
can
ote
E
must set PBC to Off
Program
mark will
Edit
Program
TRACK 2
mode;
TRACK 3
TRACK 4
disappear.
TRACK 5
TRACK 6
TRACK 7
Select
2
track, then press ENTER
a
selected track
step
3 Repeat
Program
the
on
2 to
place
additional tracks
on
the
list.
Program
CD
ote
Press RETURN
E
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1
TRACK 2
TRACK 3
TRACK 10
TRACK 2
TRACK 4
TRACK 4
TRACK 3
TRACK 3
PROGRAM to exit the
or
3
Follow
steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc"
left.
on
TRACK 5
To
TRACK 7
Clear All
TRACK 8
STER.
0: 56: 18
Clear All
TRACK 8
BYPASS
00:00
3
normal
OFF
resume
"PROG." indicator
Audio CD
MP3/WMA
menu
disappears
Repeat Programmed
programmed
track you selected last is
highlighted
on
the program list.
Press 3/4 to select the track you want to start
move
move
to the next page.
to the
previous
page.
Press PLAY to start.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
played
once.
Tracks
icon and "TRACK" appears
Repeat
To
repeat all tracks
on
the
menu
select
a
playback
from
track of CD
programmed
(or MP3/WMA) list
Repeat mode,
a
disappears
on
the
menu screen.
list, press
Track from
the
on
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
Erasing
the program
icon and "ALL" appears
Repeat
To cancel
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
Program
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
and then press ENTER.
"PROG." indicator
The
on
second time.
a
MP3/WMA disc
To resume normal
playback,
window.
repeat the track currently playing, press REPEAT.
The
6 Playback begins
have
To
The
REPEAT
Press MENU to
display
screen.
5 playing.
Press TITLE to
in the
menu
Press 2.
The
from
playback
4 programmed playback,
press PROGRAM.
TRACK 6
TRACK 7
7
menu.
TRACK 3
TRACK 4
TRACK 6
4
Program
E
TRACK 8
TRACK 1
TRACK 5
Clear All
TRACK 8
the
list.
Program
place
to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
the
Erasing
1 Follow
List"
steps
as
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programs
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
25
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD receiver memorizes the
Disc Subtitle
R
Disc Menu
Code
Volume
Menu
0dB
Size
Aspect
switch off the
player. If you load a disc that
tings memorized, the latest stop position is
ly recalled.
Small
Distance
Language
0.3
user
for
settings
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
Front L
Rating
Country
TV
R
m
Test
has its setautomatical-
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
the 3/4
you switch off the DVD/CD receiver before
ing to play it.
menu.
Speaker Setup"
Settings are stored in memory for use any time.
This player does not memorize settings of a disc
is selected, press 2
System
button.
Press 2 buttons to select the desired
3
4 Adjust options by using
if
commenc-
speaker.
You must select the
TV
341 2 buttons.
Select
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold P/STEP
on
the front
5 seconds to be able to select
a
panel
for
more
than
system (PAL, NTSC,
or
AUTO).
Speaker
selection
When the selected
Select
a speaker that you want to adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
ers
system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD receiver is connected
with Multi
NTSC:
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
PAL:
Press 1 / 2 to
adjust the output
+6dB)
level of the selected
~
Size
Since the
speaker settings
settings.
are
fixed, you
cannot
change
Distance
If you connected speakers to your DVD/CD receiver,
the Distance lets the speakers know how far the
setting
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
same
time.
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
speaker.
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
(L)
Right (R)
system.
→
Centre
→
→
Front
Rear Left
(L)
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
26
Select when DVD/CD receiver is connected
with PAL-TV.
speaker. (-6dB
listener at the
with NTSC-TV.
Dolby
Volume
the
system TV.
Select when DVD/CD receiver is connected
previous
menu.
Radio
Operation
Radio stations
Presetting
You
can
ing,
make
50 stations for FM and AM. Before tun-
preset
that you have turned down the volume.
sure
Press BAND
1
on
the remote control until FM
AM appears in the
2
3
display
or
window.
or
appear in the
(for
stereo
FM appears in the dis-
Press PRESET +/-
repeatedly
to select the pre-
set station you want.
the volume
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
3 Adjustpanel
front
a
remote
program)
window.
display
play
or
window.
one
then
when the DVD/CD Receiver tunes in
station. "TUNED" and "STEREO"
Press BAND until AM
Each time you press the button, the DVD receiver tunes in
preset station at a time.
until the
release.
Scanning stops
1
2
on
panel for about two seconds
frequency indication starts to change,
the front
Preset radio stations in the DVD/CD receiver's memory
(see "Presetting radio stations" on the left).
first
The last received station is tuned in.
And then every time you press BAND, FM and
AM changes alternately.
Press and hold TUNING
to the Radio
Listening
or
-
To turn off the radio
Press POWER to turn the DVD/CD receiver off
another function mode
ote
"TUNED"
appears when the
only
on
the front
Use manual
panel.
For manual
preset number will flash in the display window.
on
Press TUNING
5 panel
or
to select the
on
the front
the front
or
7
Press MEMORY
on
the front
panel again.
to 6 to store other stations.
To select
You
To tune in
station with
a
Press TUNING
a
weak
to tune in the station
signal
repeatedly
or
in
step
3
manually.
To clear all the stored stations
Press and hold MEMORY for about two seconds and
"CLEAR ALL" is
appeared in
MEMORY again,
the
then press
the stations
display
window and
are
cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL"
display
will go off
by
itself and
change
to normal mode.
ote
If all stations have
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
change
above.
the
preset number, follow the steps
a
5-6
in
step
2.
tuning,
or
press and hold TUNING
for about two seconds
on
the front
as
preset radio station directly
a
can use
to select
To
select
panel.
The station is stored.
Repeat steps 3
tuning
tuning, press TUNING
panel repeatedly.
For automatic
preset number you want.
automatic
or
6
or
AUX).
To listen to non-preset radio stations
Press MEMORY
A
or
is FM and
signal
STEREO.
4
(CD/DVD
the number buttons
on
the remote control
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
a
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
"STEREO"
on
the front
disappears
in the
effect.
To
improve reception
supplied antennas.
Reorient the
OPERATION
Radio
Operation (Continued)
Sleep Timer Setting
RDS
You
This unit is
1
set the DVD/CD receiver to turn off automati-
can
cally
at
a
time.
which
Press SLEEP to set the desired
The SLEEP indicator and
sleep
sleep
time.
time appears in the dis-
window.
play
2
specified
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The
display
remaining
time appears in the
window.
in many countries, RDS is a
station call signs or network
transmitting
description of
system for
information,
a
station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS
Tuning
a
and the
well
as
FM station is tuned in and it contains RDS
data,
Press the
as
indicators for the RDS services programme
(PTY), Radiotext (RT)
programme type recognition
and Clock Time (CT) if transmitted
by
the station.
Display Options
The RDS
This function will
on
automatically display the station's call sign
RDS indicator will light in the Display Window
(PS),
RDS
Dimmer
the
of the
change
brightness
display
panel during in power-on status.
DIMMER repeatedly.
the front
system is capable of transmitting a wide variety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
broadcast network
or
Press MUTE to mute your unit.
You can mute your unit in order, for
telephone,
data
to
example,
"MUTE" indicator flashes in the
answer
Pressing RDS on the
cycle through the various
call letters.
remote control enables you to
Mute
the
use
the unit will
can
window
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
When
ote
You
Operation
types in the sequence:
(PS↔FREQUENCY↔PTY ↔RT↔CT)
display
PS
window.
(Programme Service name)- The name
Display Window.
of the
channel is shown in the
Using Headphone
Connect
a
stereo
Jack
headphone plug ( 3.5mm)
PTY
into the
PHONES connector.
The
speakers are automatically disconnected
plug in a headphone (not supplied).
(Programme type recognition)- The name of
type is shown in the Display Window.
the programme
RT
when you
(Radiotext)- A "text" message contains special
information from the broadcast station. Note that this
message may scroll
across
the
display
to
permit
message.
CT
(Time
controlled
by
the
channel)-
Enables the
unit to receive the actual time and show it in the
Display
Window.
ote
Some RDS stations may not choose to include some
of these additional features. If the data required for the
selected mode is not
Window will show
a
being transmitted,
PTY
the
Display
NONE, RT NONE, CT
NONE, PS NONE message.
Radio
Operation (Continued)
Programme Search (PTY)
A
ability to encode broadProgramme Type (PTY) codes that indicate
type of material being broadcast. The following list
major
benefit of RDS is its
casts with
the
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
1
2
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
3
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
EASY M
Easy Listening
LIGHT M
Classical Music
CLASSICS
Serious Classical Music
4
Speech Programme
Music
Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
Programmes
Programmes
Programmes
Programmes
PHONE IN
Phone-In
TRAVEL
Travel and
LEISURE
Leisure and
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
Touring
Hobby
Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
You may search for a specific
by following these steps:
Emergency
Message
Broadcast Information
Programme Type (PTY)
Press BAND to select FM mode.
Press PTY
on
the remote control, the
display
will show the last PTY in use.
Press PTY
repeatedly
When the PTY is
to select
a
desired PTY.
selected, press PTY SEARCH.
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
OPERATION
Language Code
Enter the
(See
appropriate
16).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
18).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
LI
Liechtenstein
SD
Sudan
AF
Afghanistan
ET
Spain
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
BH
Bahrain
GQ
Equatorial
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
(European
Guyana
Guinea
Georgia
& S. Sandwich
(USA)
Republic
French Southern
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Taiwan
HT
Haiti
NI
Nigeria
Nicaragua
TW
Canada
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
CL
Chile
CM
Cameroon
CN
Outlying
Islands
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
IQ
Iraq
PA
Panama
UZ
Uzbekistan
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
Verde
JP
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Germany
Djibouti
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
Republic
IO
Principe
Territories
CA
CF
Mayen
Islands
Anguilla
Guinea
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
REF NC
Tr oubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
securely
Insert
that the DVD or,
a
disc.
(Check
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
?
The video cable is not connected
?
securely.
no
appropriate video input mode
the picture from the DVD/
sound
or
The connected TV power is turned off.
?T
The
?
equipment
connected with the
audio cable is not set to receive DVD
The audio cables
not connected
are
playback picture
is poor.
does not start
the TV.
Select the correct
?
input
mode of the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
jacks
you can hear the
sound from the DVD/CD receiver.
securely.
The DVD/CD receiver
urn on
audio receiver
signal output.
?
screen.
Connect the video cable into the
?
a
the TV
on
securely.
?
very low-level
sound is heard.
The
is
so
CD receiver appears
only
display
lit.)
picture.
There is
into the
audio CD indicator in the DVD
does not work.
No
service.
connecting
cable is
damaged.
dirty.
urn on
the
equipment
connected with
the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
or
display
is
lit.)
?
An
disc is inserted.
unplayable
?
Insert
a
disc.
playable
(Check
the disc
type, colour system and Regional code.)
?
The disc is
placed upside
down.
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?Amenu
is
dirty.
on
the TV
?
?
screen.
on
the disc
tray correctly
guide.
Clean the disc.
Press the SETUP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
plugs
and
jacks
are
dirty.
?
rating
Wipe
function
Rating
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
dirty.
and
speakers
components
poorly.
?
are
connected
?
The DVD/CD receiver is located too
close to the TV.
?
Clean the disc.
Connect the
speakers
and
components
securely.
?M
ove
your TV away from the audio
ponents.
com-
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?T
?
une
in the station
Preset the stations
manually.
(page 27).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work
?
The remote control is not
remote
properly.
?
sensor
pointed
at the
?P oint the remote control at the remote
of the DVD/CD receiver.
The remote control is too far from the
sensor
?
DVD/CD receiver.
?
There is
an
obstacle in the
Use the remote control within about 23
ft
path
of the
of the DVD/CD receiver.
(7 m).
?
Remove the obstacle.
?
Replace
remote control and the DVD/CD
receiver.
?
The batteries in the remote control
flat.
are
the batteries with
new ones.
REF NC
Specification
Power
Power
[Genral]
Refer to main label
Mass
External dimensions
[CD/VD]
[Video]
AM
[MW]
x
H
x
D)
x
75
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL
Designs
35°C, Operation
status: Horizontal
650
nm
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 65 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
1.0 V
output
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
108.0 MHz
-
or
65.0
-
74.0
MHz,
87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
Stereo mode
25W+25W(6Ωat1kHz,THD10%)
Front: 25W + 25W (THD 10 %)
(* Depending on the sound mode
settings and the source, there may
be no sound output.)
Centre*: 25W
Outputs
S-VIDEO
Surround*: 25W
25W
+
Subwoofer*: 60W
(8Ω
(6Ω
at 30
at 1 kHz, THD 10 %)
Hz, THD 10 %)
MONITOR
Satellite
[Suplied Acesori ]
mm
5°C to
laser, wavelength
625/50, NTSC 525/60
PHONES:
[Speakrs]
314
x
5% to 85%
Surround mode
[Amplifer]
kg
360
Temperature:
S-video
[FM]
(W
3.8
Operating conditions
Operating humidity
Video
[Tuner]
Refer to main label
supply
consumption
1
Type
Impedance
Frequency Response
Way
1
Speaker
-
1
Way
(1m)
25W
H
x
D)
1
(LHS-D6247W)
Speaker
8Ω
20,000 Hz
81 dB/W
Rated
x
Passive Subwoofer
6Ω
140
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(32 Ω, 20mW)
Speaker (LHS-D6247T)
60
-
1,500 Hz
80 dB/W
(1m)
60W
50W
120W
90x138.5x100mm
160x350x345mm
0.89
kg
4.5
kg
?Speakers...........................6?Speakercables......................5
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
and
specifications
are
subject
to
change
without notice.
Download PDF