LG LH-D6430A Owner's Manual
PDF
Download
Document
Advertisement
Advertisement
LH-D6430A NA4MSLS DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-D6430 (Main Unit: LH-D6430A, Speakers: LHS-D6430T, LHS-D6430W) CD-R/RW Before up, operating or repairing this read this instruction booklet carefully and connecting please completely. product, Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute risk of electric a shock to persons. The exclamation mark within is intended to alert the user an equilateral triangle to the presence of and maintenance important operating instructions in the instructions (servicing) accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a similar unit. CAUTION: This DVD/CD receiver To ensure proper use employs of this a Laser System. product, please read this owner 's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). OTES ON COPYRIGHTS: Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radi- It is forbidden ation exposure. via cable, To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, apparatus should splashing) and no should be placed on or not be exposed to water objects filled with liquids, such the apparatus. law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is located on the back of this unit. This number is to others. You should retain this Model No. Serial No. 2 guide as a unique to this unit and not available record requested information here and permanent record of your purchase. ___________________________________ ___________________________________ Table of Contents Audio CD and MP3/WMA Disc Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 Operation Playing an Audio CD and MP3/WMA NotesonMP3/WMARecordings. . . . . Disc . . . . . 22-23 . . . . . . . . . . 22 .22 Pause.............................23 Precautions.............................5 MovingtoanotherTrack...............23 RepeatTrack/All/Off...................23 NotesonDiscs..........................5 Search.............................23 PlayableDiscs...........................4 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . RepeatA-B.........................23 3DSurround........................23 . RemoteControl............................7 RearPanel................................8 Preparation .23 ChangingtheAudioChannel. JPEGDiscOperation......................24 ViewingaJPEGdisc.....................24 MovingtoanotherFile.................24 . . . . . . . . . . StillPicture.........................24 Connections............................9-13 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. . . . . . . . . . AerialConnections.......................11 Toflipthepicture.....................24 Torotatepicture......................24 .24 NotesonJPEGRecordings. ProgrammedPlayback.....................25 Programmed Playback with Audio CD . . . . . . . . . . . SpeakerSystemConnection...............12 SpeakerPositioning......................13 BeforeOperation.......................14-18 Mini Glossary for Audio Stream & Surround .25 ProgrammedPlaybackwithVideoCD. SpeakerSetup............................26 Mode.................................14 AdditionalInformation.....................26 SoundMode...........................14 LastConditionMemory...................26 SystemSelect..........................26 RadioOperation..........................27 Presettingtheradiostations..................27 Listeningtotheradio.....................27 GeneralExplanation......................15 On-ScreenDisplay.......................15 InitialSettings........................16-18 Initial Settings General Operation. 16 Language..........................16 . . . . . . . . andMP3/WMADisc......................25 . . . . . . OtherFunction...........................28 Picture.............................16 SleepTimerSetting......................28 SpeakerSetup.......................17 Dimmer...............................28 Others.............................17 Mute.................................28 ParentalControl......................18 UsingHeadphoneJack...................28 Selctinginputsource.....................28 Operation .19-21 DVDandVideoCDOperation PlayingaDVDandVideoCD...............19 . . . . . . . . . . . . GeneralFeatures........................19 MovingtoanotherTITLE...............19 19 Moving to another CHAPTER/TRACK . . . . . Reference LanguageCodeList.......................29 CountryCodeList.........................30 Troubleshooting........................31-32 Specification.............................33 Search.............................19 Still Picture and Frame-by-Frame Playback . 20 SlowMotion.........................20 Repeat............................20 RepeatA-B.........................20 About the symbols for instructions Indicates hazards itself or other likely to cause material damage. harm to the unit TimeSearch........................20 3DSurround........................20 Indicates special operating Indicates tips features of this unit. Zoom..............................21 MarkerSearch.......................21 SpecialDVDFeatures....................21 TitleMenu..........................21 DiscMenu..........................21 CameraAngle.......................21 .21 ChangingtheAudioLanguage. .21 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................21 and hints for making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "MLP Lossless" and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. 3 INTRODUC Before Use Playable Disc-related terms Discs Title DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play a SVCD, DVD-RW, DVD+RW, Kodak PICTURE CD, CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. Depending or itself, some cannot be -- -- the conditions of the the CD-R/RW ment CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs or irregularly shaped octagonal). It may result in otes use on feature content enabling easily. (Video Sections of audio or an enabling CD and audio CD only) a picture or a musical piece CD. Each track is assigned on a a video CD track number, you to locate the track you want. the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not accompanying Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track otes on or additional feature content, or music album. Each title is assigned a title reference number Video CD -- (DVD only) CDs Scene (the On (e.g., heart-shaped malfunctions. video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the code of the DVD/CD receiver and DVDs This DVD/CD receiver is designed and manufactured for playback of region "3" encoded DVD software. The region code on the labels of some DVDs indicates which type of player can play those 3 discs. This unit can only play DVDs labelled "3" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. 4 are two types of video CDs: Video CDs equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. unit. Regional There PBC or of video CDs Types Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Precautions Storing After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To use volatile such liquids, as the unit. Do not leave rubber near radio, or turn off the contact with the unit for leave marks Cleaning a use a store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, Cleaning discs Fingerprints or and dust the disc on reduce sound with temperature as a clean quality. cloth. Wipe Before distort the can playing, picture clean the disc the disc from the centre out- wards. on a insecticide spray, plastic products in long period of time. They will or the surface. the unit Do not To clean the cabinet Use playing, the exterior surfaces clean keep Do not or discs soft, dry cloth. If the surfaces soft cloth benzene, or moistened with lightly solution. Do not use thinner, are a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. " " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Disc get playback side of the disc. by the edges so that fingerprints VCD1.1 Do not touch the on the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions following symbol is represented by the symbol. one to the disc of the DVD Video CDs with the PBC (playback control) function. Handling Hold the disc on A section whose title has applicable only Notes symbol display or tape on the disc. Video CDs without the PBC (playback control) function. will not CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel and Display Window STANDBY/ON PHONES connector STANDBY indicator Lights red when the receiver is in Standby mode (off). VOLUME controller PLAY/FUNCTION button DISPLAY Window DISC Tray TUNING (-/+)/SKIP/SCAN buttons VOLUME PLAY( ) STANDBY/ON FUNC.( STOP PAUSE ) MONO/ST. OPEN/CLOSE MEMORY - TUNING PHONES + PAUSE/MONO/STEREO button Remote STOP/MEMORY button Indicates current sensor OPEN/CLOSE button TUNED indicator Repeat playback mode indicators surround mode STEREO Programmed playback active Indicates current audio stream MUTE indicator indicator SLEEP Indicates current indicator player function: Playback, Pause, etc. DIGITAL PL II REPEAT dts PCM ALL AB SVCD TITLE CHP/TRK TUNED PROGRAM MUTE STEREO SLEEP DVD CD MP3 VCD SVCD S-Video CD inserted ANGLE active DVD DVD video or DVD Indicates current audio disc inserted CD Audio CD inserted MP3 MP3 or number VCD Video CD inserted or track Indicates current playing time/Elapsed time/ Frequency/Sleep time/Surround title number mode/Volume etc. indicators WMA disc inserted 6 chapter Total Remote Control OPEN/CLOSE button POWER button AUX button BAND button CD/DVD button MUTE button DIMMER button SLEEP button INTRODUC NUMBER buttons REPEAT A-B button REPEAT button SOUND MODE button PL II PROGRAM button PRO LOGIC II button CLEAR button PRESET(+/-) AUDIO button buttons VOLUME (+/-) buttons SUBTITLE button ZOOM button RETURN button ENTER button ARROW buttons For use in on a GUI menu highlighting selection a DISPLAY button screen, TITLE and MENU screen. STOP button MENU button Use the MENU button to the included menu screen PAUSE/STEP button display on PLAY button DVD SKIP/SCAN video discs. two seconds for search function. Use the TITLE button to screen ) Press and hold button for about TITLE button the title / buttons SETUP button display ( ANGLE button included DVD video discs. on SLOW SCAN (Q / R) SEARCH button buttons MARKER button Remote Control Remote control Operation Range Point the remote control at the remote sensor and press remote Angle: sensor installation Remove the the buttons. Distance: About 23 ft battery battery of the remote (7 m) from the front of the AAA AAA sensor R03 cover on the control, and insert (size AAA) batteries aligned correctly. with rear two and About 30° in each direction in front of the remote Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Rear Panel POWER CORD SUBWOOFER LINE OUT Connector VIDEO 2 SPEAKER Connectors (Input) VIDEO 1 Connectors (Input/Output) Connectors OPTICAL IN Connector MONITOR OUT Connector S-VIDEO OUT Connector COMPONENT VIDEO OUT Connect to Do not touch the inner panel. Electrostatic damage to the unit. 8 a TV with Y Pb (Y Pb Pr) Pr inputs. pins of the jacks on the rear discharge may cause permanent FM Antenna Connector AM Antenna Connectors Connections to a TV Connecting Make the of the following connections, depending capabilities of your existing equipment. one ips Depending on Progressive described below. Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly your TV. Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy input 1 2 on Video connection jacks the DVD/CD receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). Connect the Left and Connect the MONITOR OUT jack Receiver to the video in on jack supplied (V). Connect the Left and the TV the TV the (A) using on AUDIO OUT supplied jacks of left/right in jacks audio cables. Set the Progressive to "On" on the setup progressive signal, see page 16. Right (A) using menu for the DVD on the TV using the Rear of TV AUDIO OUT the DVD/CD Receiver to the audio on Right the DVD/CD receiver to the audio VIDEO INPUT S-VIDEO 2 a ote -- video cable connection Connect the COMPONENT VIDEO OUT on protection system. 1 pro) high-definition or "digital ready" television, you may take advantage of the DVD/CD receiver's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD receiver. your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD receiver. Use one of the connections best connections. (ColorStream If your television is on Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the Scan jacks of left/right in jacks INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y L Pb AUDIO INPUT Pr R the audio cables. S-Video connection 1 Connect the S-VIDEO OUT receiver to the S-Video in S-Video cable 2 the TV (A) using Video V S Right A C AUDIO OUT the DVD/CD receiver to the audio Component jacks of left/right in jacks the audio cables. (Color Stream ) connection Connect the COMPONENT VIDEO OUT the DVD/CD receiver to the on 2 (S). Connect the Left and on 1 jack on the DVD/CD jack on the TV using the the TV using an Y Pb Pr Connect the Left and Right jacks on corresponding in jacks cable (C). on the TV (A) using COMPONENT VIDEO OUT AUDIO OUT the DVD/CD receiver to the audio jacks of left/right in jacks SUBWOOFER LINE OUT the audio cables. Y M O NIT O U T O R S/VID E O Pb O U T Pr Rear of DVD/CD receiver 9 PREATION Connections Connecting 1 2 3 (Continued) to Optional Equipment Connect a VCR to the VIDEO 1 connectors. Connect a additional VCR to the VIDEO 2 connectors. Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. Additional VCR IN VCR OUT IN VIDEO OUT VIDEO AUDIO (L) AUDIO (L) AUDIO (R) AUDIO (R) To AUDIO/ To AUDIO/VIDEO VIDEO IN OUT To AUDIO/ VIDEO OUT (VIDEO 1) To AUDIO/VIDEO IN To AUDIO/ VIDEO OUT To AUDIO/ VIDEO IN (VIDEO 1) (VIDEO 2) SUBWOOFER LINE OUT M O NI O U T T O R S/VID O U T E O OPTICAL OUT DVD Player (or Digital Device, etc) ote If the audio format of the produce 10 a digital output strong, distorted sound does not match the or no sound at all. capabilities of your DVD/CD receiver, the receiver will Connections Aerial Connections Connect the Connect supplied FM/AM aerial for listening to the radio. the AM loop aerial to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial PREATION (supplied) (supplied) otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After fully extend the FM wire aerial. connecting the FM wire aerial, keep it to as horizontal as possible. 11 Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible supplied speaker surround Front speaker (Right) cords. sound, adjust the speaker parameters (volume, distance, etc.). Centre Front speaker (Left) speaker SUB LI OFER UT M O NIT O U T O R S/VID O U T E O Rear speaker (Right surround) Rear speaker (Left surround) If you feel lack of bass frequency: Connect active subwoofer to an the WOOFER OUT connector using a monaural (not supplied). Subwoofer audio cord When you connect an active subwoofer, disconnect the woofer from the SUBWOOFER speaker connector. otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, Do not remove the front cover of supplied speaker. 12 adjust the volume carefully to avoid excessive output on the speakers. Connections (Continued) Speaker Positioning In the of normal case position the 6 use speakers (2 front centre speakers, speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. ? ? the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a Front speakers According to your listening position speakers to 45 degree. set up the for speakers equal distance. And by hearing position set up the interval between Centre The ? play speaker centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room - 90 size, if the audience is cm than the listener's near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Speaker (Left) Speaker Front Speaker (Right) Rear Rear Speaker (Left) Speaker (Right) Speaker Positioning Example 13 PREATION Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which A) By pressing SOUND MODE button and identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. means Each time you press SOUND MODE button, the sound mode is changed in the following order; PRO LOGIC PLII MATRIX NO → PLII MOVIE → ROCK → CLASSIC → → SOFT → POP → PLII MUSIC → LIVE → → DANCE 3D SURROUND → → TECH- BYPASS ... ips The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. ROCK: Reproduces the acoustics of rock music. POP: Reproduces the acoustics of pop music. LIVE: Reproduces the acoustics of a 300-seat live. DANCE: Reproduces the acoustics of dance music. TECHNO: Reproduces the acoustics of techno "" music. CLASSIC: Use this mode when which carries the playing "" movie or Dolby Digital mark. This mode provides 2 channel music. the effect being in a movie theatre or live concert house-an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynam- the acoustics of orchestral Reproduces SOFT: Ideal for soft acoustic sounds. of ic than before. B) By pressing Each time you press PL II button, the sound mode is changed in the following order; PRO LOGIC → PLII MATRIX (This (II) Dolby Pro Logic II creates five full-bandwidth from two-channel sources. output channels This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete PL II button → PLII MOVIE BYPASS → PLII MUSIC → ... function availabe 2-channel mode only) When DVD is inserted. You change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. can Each time you press AUDIO button, the sound mode of DVD is changed as the following order; 5.1-channel sound. →→→ MUSIC mode: The Music mode is for use with any stereo music recordings. MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to mono. For your reference ? The DVD/CD Receiver memorizes the last mode settings ? for each individually. You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labelled with the logo. Dolby Surround encoded programs are labelled with the logo. DTS Digital Surround discs are marked with DTS. source - - 3D SURROUND This unit produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel can audio from a encoded with home theatre. This feature works with DVD discs Dolby Pro Logic and Dolby Digital audio tracks. - otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). BYPASS Sound Mode is not Software with multichannel surround audio according 14 to the way it was recorded. signals is played applicable when headphone is used. Before General This manual Operation Explanation 3 operating the DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives General screen. playback 1 2 is not available on status Temporary can be be TRACK Repeat Track ALL Repeat All Tracks Repeat A-B Repeat Off AB OFF display operation Press DISPLAY Resume during playback. Press 3/4 to select an The selected item will be For some setting functions, setting. Title Repeat Chapter menu. item. be also be used for number). CHAPT the TV on title an Feedback Field Icons Repeat TITLE the disc. displayed changed on the can (e.g., can of setting press ENTER to execute the Display Some items On-screen or numbers the change The number buttons basic instructions for the DVD/CD receiver On-Screen Press 1/2 to Action play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available item. otes highlighted. Some discs may not provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language and Digital Audio Output mode Subtitle language Angle 5.1 CH ABC OFF 1/1 Sound VCD2.0 D BYPASS titles, and skips to the desired title number. Shows the current chapters, and number and total number of chapter skips to the desired chapter Shows the searches elapsed playing time, and the point directly from the elapsed number. time. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles changes the language, number, and language, and the angle number and total changes the angle number. mode, number of and setting. Numbers, ENTER 1/2,or AUDIO 1/2,or ANGLE 1/2,or SOUND MODE VCD1.1 Items Function (Press 3/4 to select desired item) Track Number Shows the current track 1/4 Time 0:20:09 Audio Channel and PBC On Shows the mode, BYPASS changes and number, total number of tracks skips to the desired track number. elapsed playing Shows the audio STER. Sound 1/2,or Numbers, ENTER, SKIP SUBTILE Shows the current sound changes 1/2,or Numbers, ENTER 1/2,or setting. Shows the current angles, and Selection Method channel, the setting. 1 /2,or Numbers, ENTER (Display only) and -- 1 the audio channel. Shows the current sound changes time Selection Method /2,or AUDIO mode, and 1 /2,or SOUND MODE 15 PREATION Before Initial You Operation (Continued) Settings set your can Picture Personal Preferences own on the player. TV Aspect 4:3 Letterbox: Select when nected. Initial General Settings Operation The setup Displays appears. Scan is Disc Subtitle English 16:9 Wide: Select when Disc Menu French Rating German Disc Audio 4:3 Letterbox Spanish Disc Subtitle 4:3 Panscan Italian Disc Menu 16:9 Wide Chinese Rating Polish Country Hungarian TV Other------------ Menu Code Aspect Language Scan Speaker Setup played cut off). 5.1 Press 3/4 to select the desired item. screen item, well as as setting for the alternate setting(s). 3/4 to select the desired setting. 3 4 require SETUP, RETURN, 5 setup Press ENTER to confirm your selection. Some items additional steps. Press or PLAY to exit the menu. Language Language Progressive for the disc's Menu, Audio, Original Disc Subtitle English Disc Menu French Rating German Code Language Scan Polish Speaker Setup Other------------ Language see for the menu. Disc Audio Chinese Disc Subtitle English Disc Menu Rating Country Code Aspect Menu 16 setup when you press SETUP. TV Code Aspect Menu Language Progressive Once the Chinese Others you On Scan Speaker Setup Caution Hungarian language Disc Subtitle Spanish Italian Aspect Progressive a Off Others Country Select DVD Disc Audio 5.1 Disc Audio Menu Scan TV press CLEAR. Menu Speaker Setup Country original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language 5.1 Scan Rating The TV Language Disc Menu and Subtitle. code, Aspect Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. DVD language : 16:9 wide TV is connected. will show the current selected, press 2, then Original sides of the Others While the desired item is a a style (Both Code Progressive Others Select back in that Original 5.1 bars conventional TV set is Disc Audio Progressive Disc masking style picture are Menu selected a with con- connected. The video material formatted in the Pan & menu TV The standard 4:3 TV is images picture. 4:3 Panscan: Select when Country 2 a theatrical above and below the Press SETUP. 1 DVD Language This is the menu setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. Before Operation (Continued) Speaker setup 5.1 Auto Speaker settings You Play DVD set up the DVD/CD receiver so a DVD disc automatically starts playing whenever the DVD is insert- DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.) can ed. If Auto Play will search mode is set to a title that back the title play On: Auto Off: Auto Play Play On, this DVD/CD receiver playback time automatically. is longest and then function is activated. function is not activated. Disc Audio Disc Subtitle R Disc Menu ote Front L Rating Country TV Code Volume Progressive Scan Play function may not work for some DVDs. Small Distance Language The Auto 0 dB Size Aspect Menu R 1 ft Test Return 5.1 Speaker Setup Others Others The DRC, Vocal, PBC and Auto Play settings can be changed. Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. Disc Audio DRC On Disc Subtitle Vocal On Disc Menu PBC On Rating Auto Country TV Off Code Aspect Menu Language Progressive 5.1 Play Scan Speaker Setup Others Dynamic Range With the DVD Control (DRC) program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set format, you can hear a DRC to On for this effect. Vocal Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. 17 PREATION Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain to the applies complete the disc. These scenes on disc or scenes are Code Code (See "Country are TV Disc Menu 6 Menu Language Progressive 5 Rating 1 4 Code 3 Aspect Language Progressive Scan 1 Speaker Setup Select the Scan Speaker Setup Others using Country 2 step 3 4 5 6 selection, Code is 1 2 While 3 When you have not entered a password. Enter a 4-digit password using the number buttons "Rating" on the Setup menu using the 3/4 buttons. "Rating" Shift the is selected, press 2. second personal 4-digit security password. then press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already registered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passto create 3 of "Rating" If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 Select rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Ratings 1 to 8: Some discs contain scenes played. Higher rated unless an alternative scenes scene is available The alternative must have the lower If will not be same on rating 5 ote This function may not work for 18 some DVDs. button and select the 3/4 buttons. Confirmation of the the code is 4-digit password changed (see "Changing is necessary when the 4-digit code" below.). Changing the 1 Follow 2 Enter the old 3 Select Steps 4-digit 1-2 as code shown above to the left (Rating). code, then press ENTER. Change using 3/4 buttons then press ENTER. 4 Enter the 5 Enter exactly the same fy by pressing ENTER. 6 Press SETUP to exit the new then press ENTER. code a second time and veri- 4-digit code, menu. If you 4-digit your code or a 1 Press SETUP to 2 Use the Number buttons to enter the selection, If you forget the disc. played no Press ENTER to confirm your rating then press SETUP to exit the menu. the 3/4 buttons. your password, to clear the current password, follow the procedure below. suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. using not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be left. ote a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. using 2 character using cursor on Press ENTER to confirm your country code then press SETUP to exit the menu. a word, then press ENTER. on selected, press 2. Select the first character Select the 3/4 buttons menu. Follow Change Code Country setup While 2 Unlock 5.1 Aspect Others 7 Menu MY Code Country 8 Disc Subtitle TV Code Set Rating 5.1 Country to the list Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were List", page 30.). Disc Subtitle The Parental Control feature allows country-dependent. disc, referring Disc Audio rated whose standards country/area a used to rate the DVD video to from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are DVD forget display the setup menu. 6-digit number "210499". The 3 4-digit password Enter a new (Rating). code is cleared. as shown above to the left DVD and Video CD Playing a DVD and Video CD Playback Setup Turn on Operation DVD VCD2.0 the TV and select the video General Features VCD1.1 input ote source con- the 1 2 3 system: Turn input source on the audio system and select Moving Load your chosen disc in the playback side facing down. READING appears tray. When tray. might menu The appear or select When displayed may be displayed first after Video CD which offers a menu. menu screen DVD button DVD is DVD loading a as more disc has title, you one to can move follows: (0-9) a to select a title number or press 1 2 to title, then press ENTER. to another CHAPTER/TRACK title on a more chapter/track 1/3 1 /12 VCD1.1 a than DISPLAY, then press the appropriate number Moving instead. a menu screen disc has Press the TV screen, and playback If playback does not start, press PLAY. In some cases, the disc a another title on automatically. to another TITLE 1/3 tray, with the Press OPEN/CLOSE to close the If use connected to the DVD/CD receiver. Press OPEN/CLOSE to open the disc starts otherwise, all operations described the remote control. Some features may also be available on the Setup menu. nected to the DVD/CD receiver. Audio Unless stated disc has than one than more track, you one chapter can move or a to another follows: as Press SKIP/SCAN .or > DVD Use the 1 234 buttons to select the want to view, then press ENTER Press TITLE or to title/chapter you start playback. MENU to return to the menu screen. VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting 2 menu the numbered buttons to select the setup. See page If Parental Control is set and the disc is not within the the 4-digit code must be entered and/or the disc must be authorized Control", (see page 18). region code. play (0-9) or two-digit numbers, press (0-9)in rapid succession. DVD VCD2.0 the numbered buttons VCD1.1 1 Press and hold SKIP/SCAN . two seconds or > for about during playback. The receiver will now go into SEARCH mode. or > repeatedly to select the discs that have code different from your receiver. The this receiver is 3 (three). press 1 then press ENTER. 2 Press and hold SKIP/SCAN . on DVDs may have a Your receiver will not chapter/track, For Search Rating settings (not authorized), -- using ote menu screen. otes "Parental number operating procedures for depending on the disc. You also may set PBC to Off under 17. -- press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track and the exact may differ Follow the instructions on the each using the menu screen. briefly during playback to return to the beginning of the current chapter/track or to select the next chapter/track. Press SKIP/SCAN . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, region region code a for required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To return to normal play, press PLAY. 19 PREATION DVD and Video CD General Features Still Picture and VCD2.0 DVD (continued) To during playback. now go into PAUSE mode. advance the repeat play, con- press PLAY. DVD VCD2.0 1 Press SLOW SCAN m title: a " A* " briefly appears on "AB" appears briefly begins (" the TV starting point. screen. at your chosen end point. the TV screen, and the repeat again on " appears the display window). 0:20:09 DVD -:--:-- The Time Search function allows you to start any chosen time on the disc. during playback. 2UsetheSLOWSCANmorMtoselectthe 1 Press DISPLAY required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion OFF Time Search will enter SLOW mode. player VCD1.1 3 To cancel the sequence, press REPEAT A-B. VCD1.1 M or VCD2.0 sequence in a sequence Slow Motion The AB 2 Press REPEAT A-B trol. 3 To return to normal DVD 1 Press REPEAT A-B at your chosen picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote can A* VCD1.1 The DVD/CD receiver will A-B Repeat Frame-by-frame playback 1 Press PAUSE/STEP 2 You Operation mode, press PLAY. display appears The during playback. the on at playing on-screen screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 10 seconds, press 3/4 Search icon in the on-screen to select the Time display. The "-:--:--" appears in the Time Search box. ote Slow motion playback in is not reverse applicable for 3 Within 10 Video CD. the seconds, required Repeat CHAPT VCD2.0 TITLE TRACK the number buttons to enter start time. Enter seconds from left to DVD use right hours, minutes, and in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. VCD1.1 ALL 4 Within 10 OFF seconds, press ENTER press PLAY to or confirm the start time. DVD Video Discs 1 To repeat the Repeat Chapter/Title/Off - currently playing chapter, Playback an press REPEAT. The 2 To Repeat Chapter icon appears on the TV invalid starts from the selected time time, playback 3D Surround screen. repeat the title currently playing, press REPEAT a BYPASS the disc. If you enter will continue from the current point. on VCD2.0 DVD VCD1.1 3D SUR second time. The Repeat 3 To exit The Title icon appears Repeat mode, Repeat on the TV press REPEAT Off icon appears on the TV This unit screen. a Video CDs 1 To Repeat on the TV screen. 3 To exit The All icon appears Repeat mode, Repeat on the TV a screen. press REPEAT Off icon appears on the TV a third time. screen. ote On a setup 20 Video CD with menu to use PBC, you the Repeat playback from two speakers, instead of the speakers normally required to listen to a home theater must set PBC to Off on function. See page 17. the five or system. during playback. 2 To turn off the 3D Surround second time. Repeat effect, which 1 Press SOUND MODE to select "3D SUR" repeat the disc currently playing, press REPEAT The 3D Surround multi-channel audio from Track/All/Off Track icon appears a conventional stereo screen. repeat the track currently playing, press REPEAT. The 2 To Repeat produce simulates multi-channel audio third time. more - can MODE again effect, press SOUND to select "BYPASS". DVD and Video CD General Features Zoom VCD2.0 DVD Operation (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the resume normal playback or the contents of DVD Video Checking activate the Zoom function. If you press ZOOM increases up to six return to paused image. Title Menu DVD 1 Press TITLE. If the current title has screen. ote The Zoom function may not work for some 2 The DVDs. Marker Search VCD2.0 DVD a menu, the Otherwise, the disc list menu can and subtitle 3 To menu menu will appear may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on again. VCD1.1 Disc Menu MARKER SEARCH 1/9 DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special DVD 1 Press MENU. You can nine points To enter 1 start playback from memorized a point. Up be memorized. can 2 To is menu displayed. the disc menu, press MENU remove again. mark, follow these steps. a disc playback, press MARKER when reaches the spot that you want to During playback Camera The Marker icon will appear on the TV briefly. screen 1 to enter up to nine Marker Repeat step points on a disc. To Recall DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene a Angle If the disc contains memorize. 2 The disc to angle appears the TV on a screen. 1 ENG 1 disc During playback, The MARKER SEARCH 2 Within 10 press SEARCH. menu will appear seconds, press 1/2 buttons to select a or use on the screen. the number Marker number that you want to recall. will start from the Marked 4 To remove scene. ferent audio 1 a During the MARKER SEARCH menu, press ferent audio playback, The MARKER SEARCH 2 will appear on the screen. VCD2.0 DVD ABC a dif- VCD1.1 repeatedly during playback to hear channel (STER., LEFT or RIGHT). different subtitle erase. a dif- 1 ENG repeatedly during playback languages. to see the ote Press CLEAR. If The Marker number will be erased from the list. 4 to hear Press SUBTITLE press SEARCH. menu the Audio Channel 5.1 CH Press 1/2 to select the Marker number that you want to 3 Subtitles Marked Scene disc repeatedly during playback language or audio track. Press AUDIO SEARCH. To clear Language Press AUDIO Changing 3 Press ENTER. Playback Changing the Audio D DVD Repeat steps 2 and 3 to erase appears, the feature is not available on the disc. additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 21 OPERATION Audio and MP3/WMA Disc Playing CD an Operation Audio CD and MP3/WMA Disc MP3 play can 1 MP3/WMA disc and close the MPEG1 audio files that have on tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". The DVD/CD receiver has a About Audio a MP3/WMA Disc The MP3/WMA appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu. menu MP3 WMA 1. 2. compatibility 3. Folder2 Folder3 Folder4 Folder5 Folder6 Clear All 5. OFF - A Creator", which single creates session disc first track. If there is Press 3/4 to select a track, it folder, and ENTER. 3 A list of files in the folder appears. to playback 4 a track then press PLAY or elapsed playing move to the previous page. Program MP3 WMA TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK05 TRACK 5.mp3 TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 STER. 0: 56: 18 Audio CD BYPASS menu are use in Clear All TRACK 8.mp3 00:00 1 MP3/WMA and highlight previous menu screen. stop playback Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. at any other requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically or are WMA conditions files). That require certain pre-existing (see above) to insure compatible playback. OFF Customers should also note that menu file list and want to return to the Folder the 3/4 to return to the To a ".wma" extension 7. MP3 ip If you less many different types of recordable disc formats (including CD-R containing TRACK 4.mp3 Clear All or "********.WMA". set to these standards. There TRACK 3.mp3 TRACK08 or or 8 letters This DVD/CD receiver TRACK01 TRACK04 incorporate ".mp3" using to the next page. move Program CD menu. MP3/WMA file in the 1st should be named e.g. "********.MP3" Press MENU to 22 names Playback starts. During playback, the current track's MP3/WMA files in the or use a new one. and must Press TITLE to 5 File system. playback ENTER. time will appear on the display window and Playback will stop at the end of the disc. list, 6. requires no ISO9660 file an MP3/WMA files. If you wish MP3/WMA files, format all the data in cannot the disc Press 3/4 to select follows: Sampling Frequency / only at 44.1kHz (MP3), 32 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "EasyCD Folder7 00:00 as with this DVD/CD - Folder1 Folder8 offers double the audio - 4. Program compression the MP3 format. receiver is limited Press 3/4 to select the MP3/WMA then press ENTER. Audio) MP3 file that Audio) Microsoft audio Media an ".mp3". Media WMA(Window technology. WMA(Windows compression of JPEG not read can file extension other than An WMA file is MP3 WMA 2 Recordings An MP3 file is audio data MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes MP3/WMA Recordings on right. a on About MP3 WMA The DVD/CD receiver Insert Notes press ENTER to time, press STOP. required permission is in order to download MP3/WMA files and music from the Internet. Our company has no to grant such permission. Permission should always be sought from the copyright owner. right Audio and MP3/WMA Disc CD Pause MP3 1 Press PAUSE/STEP Operation (Continued) WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat Moving or > playback to go to the next track beginning of the current track. Press SKIP/SCAN . twice In previous case MP3 WMA briefly during or step back to CD, the track number to go using directly to any track, the numbered buttons Repeat icon and "A Repeat to enter (0-9) during playback. * " appears Repeat 1 To Track/All/Off MP3 WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on menu screen. 2 To on a disc, press REPEAT at your chosen end point. icon and "AB" appears on the menu screen, begins to play repeatedly. The Repeat icon and "OFF" appears 3D Surround This unit the press menu screen. CD produce can on play, a 3D Surround effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from a home theater or system. 1 Press SOUND MODE to select "3D SUR" during play- a sec- ond time. Repeat 3 To cancel The menu screen. back. repeat all tracks The the again simulates multi-channel audio CD on 3 To exit the sequence and return to normal REPEAT A-B again. track. of audio sequence. disc playback, press REPEAT A-B at your cho- and the sequence to return to the briefly a 2 Press REPEAT A-B The Press SKIP/SCAN . the CD CD During sen starting point. The to another Track A-B icon and "ALL" appears Repeat mode, Repeat on the menu screen. press REPEAT icon and "OFF" appears on the a third time. menu screen. 2 To turn off the 3D Surround MODE Changing CD MP3 two seconds during playback. The now will the Audio Channel CD repeatedly during playback to hear a audio channel (STER., LEFT, or RIGHT). WMA 1 Press and hold SKIP/SCAN . player to select "BYPASS.". Press AUDIO different Search again effect, press SOUND or > for about go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY. 23 OPERATION JPEG Disc Viewing a Operation JPEG disc Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a can disc and close the menu appears on the screen. or > once to advance to the next file picture or during viewing a to the previous file. Still Picture 1 Press PAUSE/STEP tray. The MP3/WMA-JPEG choice TV to another File Moving JPEG during The DVD/CD receiver will slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. now MP3 WMA To JPEG 2 Press 3/4 during showing a picture picture horizontally or a vertically. Press 3/4 to select the JPEG then press ENTER. The JPEG menu appears on the TV flip the picture to flip the screen. To rotate JPEG Press 1/2 Folder1 Folder2 during showing clockwise picture Folder3 picture or a picture to rotate the counter clockwise. Folder4 Folder5 Folder6 Folder7 Notes Folder8 Slide Speed on JPEG Recordings Off upon the size and number of the JPEG files, it could take a long time for the DVD/CD receiver to read the disc's contents. If you don't see an on- Depending Press 3/4 to select a folder, and ENTER. 3 A list of files in the folder appears. Press RETURN to choice move to the MP3/WMA-JPEG menu. --- Tip If you list, Total number of files and folders are " a file list and want to return to the Folder on the remote to highlight menu screen. If you want to view a particular file, press 3/4 to highlight a file and press ENTER or PLAY. Viewing the file proceeding starts. press RETURN to During viewing file, the previous menu (JPEG menu). a Press TITLE to move to When you are using software such as Creator" to burn the jpeg files into the that all the selected files have the when copying move Folder1 Picture1 Picture2 Picture3 Picture4 Picture5 Picture6 Picture7 1024X768 Slide Speed Off 5/32 1024X768 Picture5.jpg ip There are three Normal, Slow, and Slide Speed options: Fast, Off. Press 1/2 to highlight the Slide 3/4 to select the option you want to viewing then press use, and press ENTER. Speed 5 To stop viewing The JPEG 24 menu at any other appears. time, press STOP. into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have File them names ".jpe" or ".jpeg" extensions, please as ".jpg" files. without be read by files shown are explorer. 5/32 the disc should be less than 650. rename to the next page. Press MENU to move to the previous page. JPEG on Some disc may be incompatible due to different recording format or condition of disc. and press ENTER to return to the previous 4 in the 34 buttons use " display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen ".jpg" extension will not be able to this DVD/CD receiver. Even as JPEG image though the files in windows Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program On a setup Video CD with menu mode to enter during playback or in the Program Edit mode. the E mark will appear to the right of the word the right side of the menu screen. on to PBC, you the use must set PBC to Off on the function. See page 17. Program contain 30 tracks. can Press PROGRAM The with Video CD ote Program 1 WMA Programmed Playback and MP3/WMA Disc The MP3 stop Insert Video CD and close the 1 OPERATION contain 30 tracks. can tray. Program 2 Press PROGRAM while The VCD Program menu is playback stopped. will appear. ote Press PROGRAM to exit the E the mark will Program Edit Program VCD mode; E TRACK 1 TRACK 2 disappear. TRACK 3 TRACK 4 TRACK 5 Select track, then press ENTER a 2 selected track on 3 Repeat step 2 Program list. to the Program place to place TRACK 6 the TRACK 7 list. additional tracks on the ote Press RETURN E Program CD TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 3 TRACK 10 TRACK 4 TRACK 3 TRACK 1 TRACK 2 TRACK 2 3 TRACK 4 TRACK 3 TRACK 3 TRACK 4 TRACK 6 TRACK 7 TRACK 7 Clear All Audio CD Clear All TRACK 8 BYPASS 00:00 3 MP3/WMA menu 4 OFF track you selected last is highlighted 5 playing. normal disappears 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. from protrack of CD playback grammed playback, select a MP3/WMA) list and then press disappears display window. Tracks list on the menu screen. repeat all tracks the program second time. a icon and "ALL" appears Repeat The Repeat mode, Erasing a Track from the on menu screen. press REPEAT icon and "OFF" appears Repeat list, press on on Program the a third time. menu screen. List 1 Press PROGRAM normal "PROG." indicator Program in the icon and "TRACK" appears Repeat To cancel the left. on repeat the track currently playing, press REPEAT. The Press PLAY to start. 7 resume REPEAT move on with playback from programmed playback, press PROGRAM. To to the next page. Press MENU to move to the previous page. resume To To Press 3/4 to select the track you want to start all of the tracks "Programmed Playback Audio CD and MP3/WMA disc" The Playback stops after have played once. menu. on the program list. To 2-6 of steps Repeat Programmed programmed Press TITLE to Follow "PROG." indicator menu Press 2. The Program TRACK 8 TRACK 6 STER. PROGRAM to exit the or E TRACK 5 0: 56: 18 4 Program MP3 WMA TRACK 5 TRACK 8 Clear All TRACK 8 on the ENTER. menu screen. MP3/WMA disc (or Program E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing the 1 Follow steps List" as Complete Program 1-2 of "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear The Program complete Program The programs are All", then press ENTER. for the disc will be erased. also cleared when the disc is removed. 25 Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD Disc Audio R Disc Menu Code Volume Menu Progressive Scan 1 ft Test If you load the latest stop player. tings memorized, ly recalled. Small Distance Language switch off the 0 dB Size Aspect user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or R Front L Rating TV VCD1.1 This DVD/CD receiver memorizes the Disc Subtitle Country CD Memory a disc that has its set- position is automatical- Return 5.1 otes Speaker Setup Others -- -- stored in memory for use any time. This DVD/CD receiver does not memorize settings of Settings are disc if you switch off the DVD/CD receiver before commencing to play it. a 1 Select "5.1 Speaker Setup" using buttons the 2 While "5.1 on setup the 3/4 menu. Speaker Setup" is selected, press 2 System button. Press 2 buttons to select the desired 3 Adjust options by using 4 Speaker Select speaker. 341 2 buttons. Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP on the front panel or remote control for select a speaker that you want to adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer)) a speaker settings prohibited by Digital licensing agreement. the AUTO: Dolby PAL: level of the selected ~ Size Since the speaker settings settings. the are fixed, you cannot change Distance If you connected speakers to your DVD/CD receiver setting the Distance lets the speakers know how far the , sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm) ote You can not set the distance of subwoofer speaker. Test Press ENTER to test the Adjust signals of each the volume to match the volume memorized in the speaker. of test signals system. Front Left Rear (L) → Centre → Front Right (R) → Right (R) → Rear Left (L) → Subwoofer Return Press ENTER to return to the 26 previous menu. not coincide with the not be system TV. Select when DVD/CD receiver is connected with NTSC-TV. Volume adjust the output speaker. (-6dB +6dB) system does Select when DVD/CD receiver is connected Select when DVD/CD receiver is connected with PAL-TV. Press 1 / 2 to AUTO). displayed. NTSC: are or system of your TV, normal colour picture may with Multi ote than 5 seconds to be able to system (PAL, NTSC, When the selected selection Certain more Radio Operation Presetting You can 30 stations for FM and AM preset make tuning, the radio stations (MW). Before that you have turned down the vol- sure Preset radio stations in the DVD/CD receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM (MW) on the remote control until FM appears in the display or 2 3 Press and hold TUNING or 2 on the front panel for about two seconds frequency indication starts to change, appear in the display (MW) FM appears in the or window. Press PRESET +/- 3 then a program) to select the pre- repeatedly set station you want. Each time you press the button, the DVD receiver tunes in until the when the DVD/CD Receiver tunes in stereo display one release. (for Press BAND until AM The last received station is tuned in. BAND, FM and station. "TUNED" and "STEREO" 1 window. And then every time you press AM (MW) changes alternately. Scanning stops to the radio Listening preset station at time. a Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - To turn off the radio window. Press POWER to turn the DVD/CD receiver off another function mode (CD/DVD, VIDEO1 or or select VIDEO2). ote "TUNED" appears when the only signal To listen to is FM and STEREO. 4 Use manual Press MEMORY A on the front Press TUNING 6 7 For manual panel. preset number will flash in the display window. 5 panel non-preset radio stations or to select the Press MEMORY on the front the front automatic tuning in step 2. tuning, press TUNING panel repeatedly. For automatic tuning, or press and hold TUNING for about two seconds or number you want. preset on the front on or on the front panel. panel again. The station is stored. To select Repeat steps 3 to 6 to store other stations. You can use to select To tune in station with a Press TUNING a weak to tune in the station in step 3 manually. "CLEAR ALL" is appeared in the display window and MEMORY again, the stations are cleared. If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the display will go off by then 9 (within 3 itself and the remote control seconds). Press MONO/ST. Press and hold MEMORY for about two seconds and "CLEAR ALL" on a For your reference If an FM program is To clear all the stored stations then press the number buttons preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 signal repeatedly or preset radio station directly a noisy panel so that "STEREO" disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo on the front effect. To improve reception Reorient the supplied antennas. change to normal mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 27 OPERATION Other Function Sleep Timer You set the DVD/CD receiver to turn off automati- can cally 1 at a specified Selecting input source You other units connected to the can use VCRs VIDEO1, VIDEO2 time. Press SLEEP to set the desired The SLEEP indicator and play 2 Setting sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF Optical connector. Refer to the owner's manual supplied with the unit for further information on the operation. Press AUX repeatedly on the remote control to select the desired input source. You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. connectors VIDEO 1: for selecting the analog signal from (L/R) & VIDEO IN Connectors. VIDEO 1 OPT: for selecting digital signal from VIDEO1 VIDEO 2: for AUDIO IN selecting the analog signal from (L/R) & VIDEO IN Connectors. VIDEO2 OPT: for This function will change the brightness of the display window on the front panel during in power-on status. OPTICAL IN Connector. repeatedly. the VIDEO1 OPTICAL IN Connector. Dimmer Press the DIMMER or Each time you press this button, the mode of the function changes in the following sequence: AUDIO IN ote or selecting the digital signal VIDEO2 from VIDEO2 otes The Mute Optical input function is available only when other unit's Sampling Frequency is 32 96kHz. You can also select the input source by pressing PLAY/FUNCTION button on the front panel. the ~ Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. Using Headphone The then press Jack Connect a stereo headphone PHONES connector. plug ( 3.5mm) into the speakers are automatically disconnected plug in a headphone (not supplied). 28 Press and hold down this button about 3 when you repeatedly to select input seconds, source. Language Code List Enter the appropriate (See page 16). code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu REF NC 29 Code List Country Enter the appropriate code number for the initial setting "Country Code" (See page 18). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM SV El Salvador BB Barbados GI Gibraltar MN Myanmar Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF French Southern BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE PM Saint Pierre and VN Vietnam CY Cyprus KG Kenya Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands DE 30 Barbuda Verde Republic Georgia & S. Sandwich (USA) Islands Anguilla Mayen Islands Republic Principe Territories (French) Tobago Kingdom Minor Outlying Islands Miquelon (French) City State Grenadines Islands Islands (British) (USA) Troubleshooting Check the following guide for the possible of cause a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD receiver ? No disc is inserted. ? Insert does not work. No Plug (Check lit.) picture. ? The TV is not set to receive DVD signal ? output. Select the on the TV appropriate video input mode so the picture from the DVD/ CD receiver appears ? The video cable is not connected ? securely. There is no sound or ? Turn ? The ? Select the correct connected with the equipment audio cable is not set to receive DVD The audio cables not connected are playback picture is poor. The DVD/CD receiver does not start the TV. ? input mode of the so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? Insert ? jacks you can hear the sound from the DVD/CD receiver. securely. The on audio receiver signal output. ? screen. securely. The connected TV power is turned off. a the TV on Connect the video cable into the ? very low-level sound is heard. only into the that the DVD or, audio CD indicator in the DVD display is a disc. securely connecting cable is damaged. dirty. Turn on the equipment connected with the audio cable. a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. or is display lit.) ? An disc is inserted. unplayable ? Insert a (Check the disc system and Regional code.) playable type, colour ? The disc is placed upside down. ? disc. Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ? A menu is dirty. on the TV screen. on the disc tray correctly guide. ? Clean the disc. ? Press the SETUP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? rating Wipe function Rating or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The ? dirty. and speakers components connected poorly. are The DVD/CD receiver is located too close to the TV. ? Clean the disc. ? Connect the speakers and components securely. ? Move your TV away from the audio components. 31 REF NC Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ? Tune in the station manually. ? Preset the stations (page 27). ? Point the remote control at the remote in with automatic No stations have been preset preset or stations have been cleared (when tuning by scanning preset stations). ? The remote control does not work The remote control is not remote properly. ? sensor pointed at the of the DVD/CD receiver. The remote control is too far from the sensor ? DVD/CD receiver. ? There is an Use the remote control within about 23 ft obstacle in the (7 m). ? Remove the obstacle. are ? Replace while play- ? Insert such the front panel ? Press DIMMER path of the of the DVD/CD receiver. remote control and the DVD/CD receiver. ? The batteries in the remote control flat. The sound mode Logic II mode be changed. The front Pro ? cannot panel display is too dim. 32 or The ing ? system a MP3 Nothing display. is cannot or change the batteries with a new ones. CD disc. WMA disc. displayed on on the remote control. Specification Power Power [Genral] External dimensions AM [MW] H x D) x 82 Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL Designs mm 5°C to 35°C, Operation laser, wavelength More than 70 dB 650 (1 kHz, NOP, 20 kHz (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 2 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 108.0 MHz Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 87.5 Stereo mode 35W+35W(8Ωat1kHz,THD10%) Front: 35W + 35W (THD 10 %) - or 65.0 - 74.0 MHz, 87.5 - 1 108.0 MHz 10.7 MHz 60 dB 150 522 - - (Mono) 8,000 Hz 1,611 kHz or 530 1,610 kHz - 450 kHz (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 35W Surround*: 35W + Subwoofer*: 50W 35W (8Ω VIDEO 1, VIDEO 2, Inputs Outputs Speaker (LHS-D6430T) 8Ω 130 Sound Pressure Level - Rated x D) kHz, THD Hz, THD 10 10 %) %) : 2 V Passive Subwoofer (LHS-D6430W) 8Ω 20,000 Hz 87 dB/W at 1 OPTICAL AUDIO (AUDIO OUT) PHONES: (32 Ω, 0.8V) Satellite (8Ω at 30 VIDEO 1 H LPF/A-Filter) 0.5 % output x REF NC nm More than 70 dB output Input Power Max. Input Power Net Dimensions (W Net Weight status: Horizontal 150 Hz to 18 kHz output Video at the bottom cover) cover) 625/50, NTSC 525/60 Impedance Frequency Response [Suplied Acesori ] 344 Semiconductor Type [Speakrs] x at the bottom 5% to 85% Surround mode [Amplifer] 360 Laser Component [FM] x kg Temperature: S-video [Video] (W 5.9 Operating conditions Operating humidity Video (labeled (labeled Refer to main label Mass [CD/VD] [Tuer] Refer to main label supply consumption (1m) 60-150Hz 88 dB/W (1m) 35W 50W 70W 100 W 95x140x95mm 160x350x325mm 0.6 kg 4.3kg ?Speakers...........................6?Speakercables......................5 ?Remotecontrol......................1?Batteries(AAA).......................2 ?AMloopantenna.....................1?FMantenna.........................1 and specifications are subject to change without notice. 33 P/NO: 3828R-D037D ">

Public link updated
The public link to your chat has been updated.
Advertisement