LH-T553TB_NA4MLLA DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T553TB (Main Unit: LH-T553 Speakers: LHS-55TBS, LHS-55TBC, LHS-55TBW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this P/N: 3834RH0100Y Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE About the REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. symbols for instructions Indicates hazards This flash with arrowhead lightning equilateral triangle symbol is intended to alert the within an to constitute magnitude a or other harm to the unit user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient itself likely to cause material damage. risk of electric Indicates special operating Indicates tips and hints for features of this unit. making the task easier. shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. OTES ON COPYRIGHTS: It is forbidden similar unit. via cable, CAUTION: This DVD/CD receiver To ensure proper use employs of this a laser system. product, please read this owner's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radi- law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. ation exposure. the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such Model No. To as prevent direct exposure vases, should be 2 to laser placed on the beam, do apparatus. not try to open Serial No. ___________________________________ ___________________________________ Ta ble of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack................21 RepeatTrack/All/Off...................21 NotesonDiscs..........................5 Search.............................21 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................22 ViewingaJPEGdisc.....................22 RemoteControlOverview....................7 SlideShow.........................22 StillPicture.........................22 Preparation Connections............................8-11 TVConnections.........................8 OptionalEquipmentConnections . . . . . . . . . . . .9 . AerialConnections........................9 10 Assembling and Connecting to the Speakers .10 ToHangtheCentreSpeakeronawall. SpeakerSystemConnection...............10 SpeakerPositioning......................11 BeforeOperation.......................12-17 Mini Glossary for Audio Stream & Surround . . . . . . . . . Mode.................................12 SoundMode...........................12 On-ScreenDisplay.......................13 InitialSettings........................14-17 GeneralOperation....................14 Language..........................14 Display..........................14-15 Audio..............................15 Lock(ParentalControl)................16 Others.............................17 Operation DVDorVideoCDOperation...............17-20 PlayingaDVDandVideoCD...............17 GeneralFeatures.....................18-20 MovingtoanotherTITLE/GROUP. Moving to another CHAPTER/TRACK . . . . . . . . . . .18 . 18 SlowMotion.........................18 Still Picture and Movingtoanotherfile.................22 Torotatepicture......................22 ProgrammedPlayback.....................23 RepeatProgrammedTracks................23 .23 ErasingaTrackfromProgrammeList 23 Erasing the Complete Programme List DivXDiscOperation.......................24 SpeakerSetup............................25 Frame-by-Frame Playback . 18 . . . . . . . . . . . . . AdditionalInformation......................26 LastConditionMemory...................26 ScreenSaver...........................26 SystemSelect..........................26 ControllingtheTV.......................26 OperationwithRadio......................27 Presettingtheradiostations................27 Listeningtotheradio.....................27 OtherFunctions...........................28 SleepTimerSetting......................28 Dimmer...............................28 Mute.................................28 UsingtheHeadphoneJack................28 SelectingtheInputSource.................28 XTS(ExcellentTrueSound)................28 XTSpro...............................28 Reference LanguageCodeList.......................29 CountryCodeList.........................29 Troubleshooting........................30-31 Specifications............................32 Search.............................18 Repeat............................18 RepeatA-B.........................19 TimeSearch........................19 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................20 TitleMenu..........................20 DiscMenu..........................20 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .20 .20 Subtitles...........................20 DVDAudioDiscs........................20 3 Introducin Before Use Playable Discs ote When (8cm/12cmdisc) DVD audio discs gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. Video CD (VCD) (8cm/12cmdisc) Audio CD Disc-related terms (8cm/12cmdisc) SVCD and CD-R or MP3, WMA, JPEG Title DVD-RW, DVD+RW, CD-RW that contains audio titles, play can or DTS-encoded playing volume (8cm/12cmdisc) addition, this unit DTS-encoded CDs CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the DVD In on a DivX files. (DVD only) The main film content accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number or you to locate it enabling easily. otes Depending on the conditions of the the CD-R/RW ment or itself, some cannot be CD-R/RW played on the unit. Do not attach any seal labeled side recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs or label to either side (the side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. or the recorded Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Group (DVD The main audio content on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available functions may be added. Make sure to also refer to the instructions or other supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be Regional played on the unit. code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured for playback of region "3" encoded DVD software. The region code on the labels of some DVDs indicates which type of player can play those 3 discs. This unit can only play DVDs labeled "3" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. only) or accompanying feature con- additional feature content, or music album. Each group is assigned a group reference number enabling you to locate it easily. tent otes audio discs or Scene On (VCD) Video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. of Video CDs Types There are two types of Video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. 4 Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To keep Do not or radio, or turn off the use volatile such liquids, contact with the unit for leave marks Cleaning as a use a store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, Cleaning discs Fingerprints or temperature as and dust on the disc can distort the picture reduce sound with a clean quality. Before playing, clean the disc cloth. Wipe the disc from the centre out- wards. on insecticide spray, plastic products in long period of time. They will a or the surface. the unit Do not To clean the cabinet Use playing, the exterior surfaces clean the unit. Do not leave rubber near discs Storing Precautions soft, dry cloth. If the surfaces soft cloth benzene, or moistened with lightly solution. Do not use thinner, are a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain a clear picture The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. "" may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc Disc on Discs Handling get on for instructions following symbol is represented by the symbol. one to the disc DVD-Video disc. of the DVD-A DVD Audio discs. Video CDs with the PBC (playback control) function. will not VCD1.1 the surface. Do not stick paper symbols specific DVD and finalized DVD±R/RW. Do not touch the Hold the disc that DVD-V VCD2.0 playback side of the disc. by the edges so that fingerprints on A section whose title has applicable only Notes symbol display Video CDs without the PBC (playback control) function. or tape on the disc. CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel Connect a MIC 2 to both sockets. or PHONES connector STANDBY/ON MIC 1/MIC 2 to MIC 1 microphone or STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor USB host Connect to a (USB of MONO/STEREO/ multimedia PAUSE/STEP USB port memory etc.) TUNING(-/+)/SKIP(-/+) buttons STOP Power Cord SPEAKER connectors FM Antenna connector AV2 AUDIO Connectors L AUDIO R 8 8 AM 8 8 Loop AV2 IN 8 AV1 IN Antenna connectors S-VIDEO OUT connector MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to AV1 AUDIO Do not touch the inner panel. Electrostatic damage to the unit. 6 a TV with Y Pb Pr Input (L/R)/VIDEO pins of the jacks on the rear discharge may cause permanent inputs. IN Connectors Input (L/R)/VIDEO IN Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) or Selects DVD System's (FM directly or options in Set the MUTE at Selects AUDIO SOUND MRAKER - SEARCH Removes the PRESET/ Marks CH an audio an language (DVD) audio channel (CD). Accesses On-Screen Selects the TV's or removes Accesses the setup menu b/B/v/V . Selects DVD disc. menu on a source. SCAN-/+(bb/BB) Search backward or REVERSE forward. playback. Displays the disc's Title VOLUME To Starts playback. (x) Stops playback. ZOOM CLEAR the DVD video track number on the Enlarges program menu or a mark MARKER SEARCH on the DIMMER menu. Press to REPEAT Repeat chapter, track, title, display dur-ing all. REPEAT A-B Repeats image. change brightness window on the front of the panel in power-on status. USB sequence. To ECHO VOL.(V/v) Adjusts echo volume. MIC enjoy the multimedia files. VOL.(V/v) Adjusts microphone Remote Control (X) playback STOP into menu, if available. (B) Pause the tuner. a Radio. (+/-) PAUSE/STEP menu. MEMO. Removes or adjust speaker volume and TV volume. PLAY PROG. frequency selection. TITLE forward*/go to next chapter or track. radio station's menu To tune in the desired radio station. SKIP SKIP(>) Program the TUN(-/+) (b/B): backward*/go to beginning of current chapter or track or go to previous chapter or track. or removes menu. Select programme of TV Search Search in the PRESET/CH(+/-) (v/V): SKIP(.) FORWARD option an Acknowledges SLOW-/+(t/T) Reverse/ Forward slow (left/right/up/down) ENTER SCAN volume. Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: display. - MENU a menu. INPUT SETUP Enter MARKER SEARCH DISPLAY .. Selects the sound mode. Accesses menu. point during playback. a Displays + or SOUND MODE Accesses setup SEARCH AUDIO Selects language (DVD). MARKER sound effect. enjoy great subtitle a RETURN XTS To automatically. speakers. SUBTITLE sound. off SUBTITLE natural and realistic more a System to turn specified time. Mute the a XTS pro enjoy only) MUTE menu. To TV (LG SLEEP and AM service, programme number select numbered source. SLEEP 0-9 numerical buttons a input To control the TV. bands) Select tray. TV BAND tuner and closes the disc AUX accesses Select the (Z) About 30° in each direction in front of the remote sensor Remove the remote battery cover on control, and insert AAA) batteries correctly. installation battery with the rear two R03 and of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Introducin Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Progressive Scan (ColorStream connection If your television is ips Depending your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connection on methods described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. sure high-definition or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD Receiver. a Connect the COMPONENT VIDEO OUT Caution Make pro) the DVD/CD Receiver is connected to the TV. Select the correct AV directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input jacks from the DVD/CD Receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). on protection system. Rear of TV VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT S-Video connection Y Pb Pr L Connect the S-VIDEO OUT DVD/CD Receiver to the S-VIDEO TV S-Video cable jack on the IN jack on the using the (S). Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using V S the C supplied (V). Component Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT DVD/CD Receiver to TV using an Y Pb Pr jacks from the the corresponding in jacks on the cable (C). L AUDIO R AV2 IN AV1 IN Rear of DVD/CD Receiver otes Set the Progressive to "On" on the Setup progressive signal, see page 15. Set the progressive to "Off" by removing from the unit and close the disc tray. disc" is window. displayed on the display see STOP and hold it for five seconds before Progressive scan video connections does not work with the (yellow VIDEO S-VIDEO connection. 8 OUT menu for any disc that "no Then, press releasing analog jack) or it. Connections (Continued) Optional Equipment Connections 1 2 3 Connect a VCR to the AV1 IN connectors. Connect a additional VCR to the AV2 IN connectors. Connect the USB port of a USB Memory (or MP3 player, etc.) to the USB HOST on the front of the unit. Prepa tion VCR OUT IN Additional VCR Front of DVD/CD Receiver IN OUT To AUDIO OUT VIDEO (L/R)/ VIDEO OUT AUDIO (L) AUDIO (R) To AUDIO OUT (L/R)/ VIDEO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) To AUDIO IN VIDEO IN To AUDIO IN VIDEO IN (L/R)/ (AV1) (L/R)/ (AV2) L AUDIO R 88 AV2 IN 888 AV1 IN otes If the audio format of the produce a digital output strong, distorted sound does not match the or no capabilities of your DVD/CD Receiver, the receiver will sound at all. The DivX files in your memory card will not be able to be play. Aerial Connections Connect the Connect supplied FM/AM aerial for listening the AM Loop aerial to the AM aerial to the radio. connector. Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) L AUDIO R 88 AV2 IN 888 AV1 IN otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure After fully extend the FM wire aerial. connecting the FM Wire aerial, keep to it as horizontal as possible. 9 Connections Assembling the (Continued) and Connecting to Connect the Speakers The front and speaker rear speakers rear speakers using the supplied speaker cords. are detached from the stands. Connect the ble the front and Speaker System Connection speaker cords and assemspeakers from speaker stands as To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). illustrated. Front speaker (Left) Front Connect the speaker terminals the bottom of each front and speaker (Right) appropriate terminals on the bottom of each front and rear speaker. After connecting the speaker cords to the appropriate on cords to the speaker and attach the the speaker stands. front and rear the rear speakers to Rear speaker (Right surround) Rear speaker (Left surround) Center 8 8 speaker 8 8 8 Subwoofer ote You cannot detach the bling To the front and hang speaker from rear speakers. the centre the stand after speaker assem- on a wall You 1 2 can hang the Centre Speaker Detach the stand bottom of the by rotating the Centre Speaker. Attach the stand rear of the by rotating Centre Speaker. wall. on a the screw on screw on the the otes Be sure terminal are 3 Hang it via hole on the Speaker on the screw. rear side of the Centre on the speaker components: cable to the + to + and -- appropriate to --. If the cables reversed, the sound will be distorted and will lack base. If you use adjust the speakers. Do not 10 to match the front speakers with volume carefully to remove the front cover low maximum input rating, avoid excessive of output supplied speaker. on the Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers to play the excellent bass sound, DTS digital surround or Dolby Digital surround, If you want connect a subwoofer. woofer). ?F set up the for speakers equal distance. And by hearing position set up the interval between Centre The ? you should r ont speakers According to your listening position speakers to 45 degree. ? and sub- speaker centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room size, if the audience is 90 than the listener's - cm near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Front Speaker (Left) Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 11 Prepa tion Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You VCD2.0 DVD VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as DVD and compact discs, etc.bearing the trade- quality digital discs, mark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. When DVD is inserted You change can the Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. After you select 2 channel a) 3 ENG AUDIO ) by pressing button repeatedly. D 2CH Bypass Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program source. If you play DVDs with mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Digital (For example 2 ENG D 2CH or button, press SOUND Music Movie Matrix The " " After you select 5.1 channel b) (For example 1 ENG D 5.1 CH or 4 ENG ) by pressing DTS 5.1 CH " -" - AUDIO indicator will be "BYPASS" indicator button, press SOUND button. displayed on the TV screen. will be only displayed on the display window. (II) Dolby Pro Logic II creates five full-bandwidth channels from two-channel an sources. output This is done using advanced, high-purity matrix surround decoder that extracts the without spatial properties of the original recording adding any new sounds or tonal colorations. MOVIE mode: Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → use quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use → → with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that the → → → The Movie mode is for approaches When Video CD is inserted ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed with any stereo music on the TV screen. recordings. When CD is inserted MATRIX mode: Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the fol- The Matrix mode is the same as the Music mode order. except that the directional enhancement logic is lowing turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo simply to force the audio to mono. reception may be → → → → → → → → → For your reference ? You identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can - - BYPASS - Software with multichannel surround audio played according to the way it was signals recorded. is otes When you the output play sound tracks with 96kHz sampling frequency, signals will be converted to 48kHz (sampling frequency). When you use a microphone, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system. 12 Before Operation (Continued) On-Screen You Display the general playback status on screen. Some items can be changed using the To use the on-screen display: display can the TV menu. Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B,Numbers ENTER Press DISPLAY during playback. 1 2Pressv/Vtoselectanitem. highlighted. Chapter Number 1/12 0:20:09 Numbers, ENTER Audio 3 Press b / B to change the the number buttons if use inputting the title setting. You can appropriate (e.g. number). For press ENTER to execute the some also A-B Repeat title Repeat sequence Resume Action play b/Bor AUDIO functions, setting. language ABC SUBTITLE prohibited or point Example: On-Screen Display during playing VCD not available otes Selection Method Track Number If no button is screen provide for 10 pressed display disappears. all of the features seconds, the b/B Bypass Items Some discs may not shown below. b/B 1/3 Sound from this b/Bor 1 ENG Angle PLAYBACK STATUS/RESTRICTIONS Title language and Digital Audio Output mode Subtitle Prepa tion B,Numbers ENTER Time search The selected item is b / on- (or PBC 1/3 b / B,Numbers ENTER mode) Numbers Time search 0:20:09 ENTER b/Bor Audio Channel AUDIO Sound Bypass b/B Example: On-Screen Display during playing DVD Audio Selection Method Items Group b / Number ENTER b / Track Number 0:20:09 Audio language and Digital Audio Output mode language B, Numbers ENTER Time search Subtitle B, Numbers Display only b/Bor AUDIO OFF ABC Display only b/B Page (or Angle) or 1/3 13 Before Initial Operation (Continued) LANGUAGE Settings the menu, you can make various adjustments to items such as picture and sound. You can also By using set Setup for the subtitles and the language among other things. a item, To see For details on display the menu. SET UP will take you back to initial To go to the next level: v Select menu v 4 5 v audio), appears. option then the second level. will be shown the current setting for the B to move to screen item, as well as alternate setting(s). / V to select the second desired / V move option to the third level. Original setting language for the Setup menu and DVD-V display. DVD-A you prefer for the audio track subtitles, and the disc menu. Original: disc on-screen was language Refers to the original language (disc in which the recorded. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language code, press CLEAR on the then press ENTER to confirm your selection. Some items require additional steps. or Select remote control. to select the desired Press SET UP a Select the then press B to Use Disc Menu Disc Audio / Subtitle / Menu / V to select the desired selected 3 Off OSD Operation setup 2 press Use Disc Subtitle Move Press SET UP. The Original screen. the remote control. on General Use Disc Audio A second press of To go back to the previous level: Press b on the remote control. The English and exit the Menu: Press SET UP to Press B Setup menu, each Setup menu OSD pages 14 to 17. display 1 LANGUAGE PLAY to exit the DISPLAY setup DISPLAY menu. TV 16:9 Aspect Display Mode Progressive Widescreen Off Scan Move TV Aspect DVD-V 4:3: Select when a 16:9: Select when Display Mode Display Mode Select DVD-A standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD-V setting DVD-A works only when the TV Aspect mode is set to "4:3". Letterbox: upper and 14 bands on the Automatically displays the wide picture on screen and cuts off the portions that do not fit. Panscan: entire Displays a wide picture with lower portions of the screen. the Before Operation (Continued) Progressive Scan Progressive AUDIO Scan Video tures with less provides the highest quality pic- flickering. set Progressive Select 1 menu scan set signal, the variety of audio type of audio system you Scan to Off. Progressive "Progressive Scan" on output options. options according to use. Prepa tion AUDIO If you are using the Component Video jacks for connection to a TV or monitor that is compatible with progressive a Set the DVD/CD Receiver's AUDIO If you are using the COMPONENT VIDEO OUT jacks, but are connecting the receiver to a standard (analog) television, Each DVD disc has 5.1 a Scan to On. Select Speaker Setup DRC On Vocal On the DISPLAY then press B. DISPLAY Move TV Off Aspect Display Select On Mode Progressive 5.1 Scan Speaker Setup DVD-V DVD-A Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25) Move 2 3 Select "On" 4 When the confirm 5 Pressing ENTER will set the to Progressive scan mode. the using v Select Dynamic Range Control (DRC) / V buttons. DVD-V Press ENTER to confirm your selection. The confirm menu will appear. menu appears on your screen Cancel is highlighted as default. Use the b / B buttons to highlight Enter. DVD/CD Receiver DVD-A With the DVD DivX program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing dialog intelligibility. format, you can hear a Set DRC to On for this effect. otes The DRC function works Caution Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to depending of recorded discs. Dolby Digital The level of only during playback Dynamic Range Compression on may differ the DVD disc. On in error, you must reset the unit. DVD-V Vocal 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP release it. The video standard visible for five seconds then output will be restored and DVD is mix into playing. a only when a multi-channel Karaoke The karaoke channels on the disc will normal stereo sound. to the picture will once again be conventional analog TV or monitor. setting, on a (x) Set Vocal to On a 15 Before LOCK Operation (Continued) Password (Parental Control) You LOCK Unlock Rating **** Password Country can control information certain scenes on on 2 Follow shown left to that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or 3 4 Press SET UP to exit the rated your children from being able to view material you believe is unsuitable. 1 "Rating" on 1 the LOCK menu then, press 2 the 6-digit number security code is and the 2 Enter a new code as Password and Code features, you must input the security code you created. If you have not yet entered prompted to do so. a security Country 4-digit code you are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3Selectaratingfrom1to8usingthev/V buttons. Rating 1-8: Rating and rating eight (8) one (1) menu. has the most restrictions is the least restrictive. Code can "210499" on clear it the using setup menu cleared. described above. ote When " " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country Code DVD-V Enter the code of the Rating, or then press ENTER. forget your Security Input setup B. To access the then press B. (Rating). "Change" If you forget your security code you the following steps: to control feature allows you to block access below the rating you input, thereby preventing Select as menu Select parental scenes 2 step the LOCK highlighted. Enter the new 4-digit code, Input it again to verify. from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The change password. "New" is DVD-V for children to view. or Select Password If you Some movies contain enter 1 Code Move Rating (Security Code) were country/area used to rate the DVD-Video in the reference 1 Select 2 Follow whose standards disc, based on the list chapter. "Country Code" on the LOCK menu, then press B. step 2 as shown left Select the first character 3 Shift 4 the second (Rating). using v / V buttons. using B button and select character using v / V buttons. cursor the Unlock If you select and the disc unlock, parental control is plays not active 5 in full. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available on not played unless an alternate scene the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same Press ENTER to confirm your 4 then press SET 16 UP to exit the rating selection, menu. Press ENTER to confirm your country code selection. Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Tu rn on DVD VCD2.0 the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn and select the on input the audio source Operation system connected to the DVD/CD Receiver. Select Move PBC Set 1 VCD Playback Control to On (PBC) On:Video CDs with PBC or Off. to the played are the same way You can 3 DivX show the DivX DRM Your Please the registration use this code to DivX(R) : using the To learn only. more tray. the TV screen, and playback If playback does not start, on automatically. might menu appear XXXXXXXX If Video On Demand service. DivX(R) to close the sure instead. register this player with This will allow you to rent and READING appears (Z) press PLAY. In some cases, the disc (Digital Right code is Press OPEN/CLOSE starts code for your unit Management) Registration tray. up. When a double-sided DVD is inserted, make the side you want to play is facing down. as Audio CDs. DivX(R) Registration to open the disc 2 facing PBC. Off:Video CDs with PBC (Z) Load your chosen disc in the tray, with the label played according are Press OPEN/CLOSE purchase The videos is displayed may be displayed first after Video CD which contains a menu. menu screen DVD Video On Demand format. a menu screen or loading a go to www.divx.com/vod DVD-V The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental Use the b/B/v/V buttons to select the an encrypt movie file. title/chapter you want to view, then press ENTER to start. Press TITLE or DVD MENU to return to the menu screen. DVD-A otes If you rent the DivX VOD file, it has several viewing limits as show below. options of Use the b/B/v/V buttons to select option option. an want, then press ENTER to view the you VCD2.0 ? Display the number which you can watch the file. Use the number buttons to select the track you want to view. Press RETURN to return to the ? This rental video has 7 views left. A view ends when you video, or stop playback, play turn off your Do you want to The rental has been different use one of your 7 views the and the exact operating procedures for depending on the disc. menu screen. You also may set PBC to Off under setup. menu now No expired. This rental is setting may differ Follow the instructions on the each using player. Yes ? a Menu menu screen. expired. otes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized "Parental ? Display the authorization This video player error. is not authorized to play this video. Control", (see page 16). region code. on DVDs may have a Your receiver will not play discs that have code different from your receiver. The this player is 3 (three). region region code a for 17 DVD Video CD or Operation (Continued) Still Picture and General Features DVD-V ote Unless stated otherwise, all operations described use move a DVD-V to another TITLE/GROUP disc has to another title/group (0-9) DVD-V to select DVD-A title disc has a VCD2.0 on a more as you can follows: as Press . or can one more than track, you chapter can move DVD-V during VCD2.0 t 1/4 1/8, 1/16, T 1/8, T 1/4 e xit slow motion To To playback DVD-V 3 mode, press PLAY. DVD-A VCD2.0 DivX VCD1.1 Repeat Chapter/Title/Off - repeat the currently playing chapter, press Repeat Chapter icon appears on the TV screen. repeat the title currently playing, press second time. a Repeat Title To exit icon appears the TV on screen. REPEAT Repeat mode, press a third time. The Off icon appears Repeat the TV on screen. pause. Video CDs or t 1/2 or T 1/2 mode, required speed: (backward), or T (forward). t 1 To reverse is not applicable for 3 To Repeat Track/All/Off repeat the track currently playing, press Repeat Track icon appears on the TV screen. repeat the disc currently playing, press REPEAT a second time. Repeat All icon appears To exit on the TV screen. REPEAT Repeat mode, press a third time. The Video CD. - REPEAT. The 2 press PLAY. ote in to select the repeatedly Video a REPEAT The Slow motion go into SEARCH mode. REPEAT. The VCD1.1 Use the SLOW -/+ to select the t now mX8, mX16, MX2, MX4, MX8, To exit SEARCH The (0-9). The receiver will enter SLOW mode. 2 1/16, VCD1.1 during playback. or M DVD-Video discs the numbered buttons DVD-A or M The DVD/CD Receiver will Repeat 2 Press SLOW -/+ To 3 1 ote Slow Motion Press m VCD2.0 DVD-A CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). to another > two-digit numbers, press (0-9) in rapid succession. DVD-V Press m or a follows: For picture frame-by-frame by pressrepeatedly on the remote control. PAUSE/STEP With one the numbered buttons go into PAUSE (backward) or MX16, MX100 (forward). press DISP. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track using now advance the mX100 briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, number 1 DivX VCD1.1 during playback. 2 required speed: mX2, mX4, title number. disc has than chapter/track 3 2 ing to another CHAPTER/TRACK Moving a title/group, one DISP., then press the appropriate numbered button When than more DivX VCD1.1 The DVD/CD Receiver will Search Press 1 Press PAUSE/STEP You DVD-A When VCD2.0 mode. the remote control. Some features may also be available on the Setup menu. Moving 1 DVD-A Frame-by-frame playback Off icon appears Repeat on the TV screen. ote On a the setup 17. 18 Video CD with menu to PBC, you use the must set PBC to Off Repeat on function. See page DVD Video CD or General Features Repeat To repeat 1 2 A-B a (continued) briefly Press A-B VCD1.1 Marker Search DVD-V You from can nine a on again A-B appears briefly begins. the TV starting point. 1 screen. at your chosen end on start points To enter title: Press A-B at your chosen A- appears VCD2.0 DVD-A sequence in sequence 3 DVD-V Operation (Continued) the TV screen, and the a playback VCD2.0 2 VCD1.1 During disc playback, press MARKER when playback reaches the spot that you want to on a 1 Press DISP. during playback. play appears on the at The on-screen dis- elapsed playing time of Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. 3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct remove num- bers. 4 Playback point. briefly. points disc. Marked Scene a 1 2 3 Playback 4 disc To clear a SEARCH. playback, press The MARKER SEARCH menu will appear on the screen. marker a number that you want to recall. To will start from the Marked remove scene. the MARKER SEARCH menu, press SEARCH. During Marked Scene disc SEARCH. playback, press 1 2 3 Repeat steps 4 5 The MARKER SEARCH menu will appear on the screen. Press 1/2 to select the marker number that you want to erase. Press CLEAR. Within 10 seconds, press ENTER to confirm the start time. enter screen Press ENTER. the current disc. 2 the TV Within 10 seconds, press 1/2 to select screen. The Time Search box shows the on 1 to enter up to nine Marker Repeat step During playing to point. Up mark, follow these steps. The marker icon will appear repeat The Time Search function allows you to start any chosen time on the disc. memorized be memorized. can To Recall DVD-V a VCD1.1 memorize. point. To cancel the sequence, press A-B. Time Search VCD2.0 an starts from the selected time invalid time, playback the disc. If you will continue from the current on The marker number will be erased from the list. 2 and 3 to erase additional marker numbers. To remove the MARKER SEARCH menu, press SEARCH. Zoom DVD-V DVD-A VCD2.0 VCD1.1 DivX The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback still playback activate the Zoom function. If you press ZOOM increases up to four 100% size → 1600% size 2 or Use the 1 2 zoomed repeatedly, magnification level steps. 400% size → the → 800% → 100% size 3 4 buttons to move through the picture. ote The zoom function may not work for some DVDs. 19 to Operation DVD Video CD or Operation (Continued) DVD Features Special DVD-V A typical DVD Audio disc contains up data capacity of a CD. This additional DVD-A the contents of DVD Video discs: Menus for Then, appropriate option. Alternatively, use the 1/2/3/4 buttons light your selection, then press ENTER. to an DVD-V 2 Some DVD Audio video clips. enjoy DVD a menu, the Otherwise, the disc The menu can list camera guage and subtitle title. menu menu will appear on may appear. angles, spoken lanoptions, and chapters for the DVD-V is DVD-A displayed. Language DVD-V DivX repeatedly during playback audio language or audio track. Changing 5.1 channel on audio out- analog the DVD/CD receiver). COAXIAL) for If you use the DIGITAL OUT (OPTICAL or your audio connection, the sound will only be similar to CD-quality sound even though you're playing DVD a Audio disc. to another GROUP display. Press AUDIO different use and surround effect of groups. Your player enables you to quickly access different groups during playback via the on-screen the Audio Changing must quality Some DVD Audio discs divide content into different DVD-A Press MENU. menu maximum sound Audio, you Moving The disc biographies, playlists, or discs contain photo galleries or ote DVD-A screen. Disc Menu artist as put (5.1CH AUDIO OUT jacks If the current title has the DVD Audio discs contain high- Press TITLE. 1 text, such lyrics. To Title Menu longer recordings. Many on-screen DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. number button to select times the seven space is used for music, either Advanced Resolution multi-channel sound quality that is closer to the artist's master recording or Checking press the to the Audio Channel to hear a 1. Press DISP. 2. Press 3/4 to select 3. Press 1/2 during playback or Group in on stop mode. icon. the numbered buttons (0-9) to select group number. VCD2.0 VCD1.1 Note: Sometimes the author of the disc creates hidden Press AUDIO content that different word. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's repeatedly during playback to hear a audio channel (STER., LEFT or RIGHT). ote If jacket appears, the feature is not available a on the disc. can only cover or on a isn't dictated by be accessed web site). This by entering password your DVD/CD receiver --- it is a pass- control a function of the disc. Subtitles DVD-V DivX Since the Press S-TITLE different repeatedly during playback subtitle languages. to see the otes The subtitle file of the DivX file is displayed only smi, no information not read in the DivX or there is file, "1/1" etc a code that are displayed. can DVD Audio Discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio a new disc format provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). 20 can the Viewing another PAGE Since DVD Audio discs srt and sub. If there is the authoring of DVD Audio Discs varies, some of on-screen display choices might not be available for disc you're playing. are various ways to 1. Press DISP. 2. Press 3/4 to select 3. Press 1/2 to select lot of content, there what's available on the disc. can see hold a during playback. Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the the the authoring of DVD Audio Discs varies, some of on-screen display choices might not be available for disc you're playing. Audio CD Playing Disc MP3/WMA Disc or Operation Audio CD and MP3/WMA an MP3 CD Repeat You WMA can play recordings on MP3/WMA formatted play can CD-ROM, CD-R, or CD-RW discs. 2 Press REPEAT to select Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press ? ENTER and playback a disc. disc. The repeat icon ? desired a repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc. does not Off(No display): Operation play repeatedly. starts. 1/12 0:00:00 playing on a WMA appears. ? or MP3 CD title/chapter/all/track a 1 Press REPEAT when The DVD/CD Receiver PLAY Track/All/Off Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 Search CD 1 Press m or WMA Mduring playback. The receiver will 2 Press m MP3 now M or go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). 3 To e xit SEARCH required MX2, or mode, press PLAY. MP3 / WMA 1. Press v / V to select folder, and press ENTER to the folder contents. see 2. a Press v / V to select ENTER. a MP3 / WMA disc track then press PLAY or starts. Playback with this player 48 Sampling frequency: within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz (MP3), The DVD/CD Receiver cannot read an limited ? as compatibility is follows: within 32 - - 0:00:00 1/104 ? MP3 List Program ? 1-Music1 - MP3/WMA 2-Music2 file that has 3-Music3 file extension other than a 4-Music4 ".mp3" / ".wma". 5-Music5 6-Music6 7-Music7 ? CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is otes If you are in file list a on to return to the Folder the MP3/WMA list, use the v / V to impossible and want menu highlight ? On a move to the next page. CD with MP3/WMA file and JPEG switch MP3/WMA and JPEG menu. MP3/WMA top of the JPEG word or lighted. Then, use on file, you can ? Press TITLE and is menu b / B to select MP3/WMA highJPEG or to format should be ISO 9660 playback MP3 / WMA files. We recommend that you use Easy-CD creates an ISO 9660 file system. and press ENTER. Press MENU to physical File names should have must incorporate They should not a Creator, which maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? The total number of files on the disc should be less than 999. then press ENTER. This DVD/CD Receiver Pause MP3 CD 1 Press PAUSE/STEP WMA playback, PAUSE/STEP again. Moving Press . track or or to return case or of audio the track number CD, to CD step back to go using directly are press to the WMA to the next track. previous to any optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 briefly during playback to go to the beginning of the current briefly recordings achieve > Press . twice In press PLAY to another Track discs and to meet certain technical standards in order to during playback. 2 To return to requires track, the numbered buttons track. enter (0-9) these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. during playback. 21 JPEG Disc Viewing This unit a Operation JPEG disc JPEG JPEG disc as play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. can Insert disc and close the tray. The JPEG menu appears on the TV 1 notes on ? a screen. with this is limited player follows: upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents. If you don't Depending see an on-screen display after several minutes, of the files may be too large reduce the resolution of the JPEG files to less than 2760 x some JPEG 2048 List compatibility Preview --- pixels and burn another disc. JPEG Folder 1 ? JPEG Folder 2 The total number of files and folders on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 ? Some discs may be incompatible due to recording format or the condition of disc. ? Ensure that all the selected files have the JPEG Folder 8 Press 2 v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder remote to list, the v / V buttons use Windows viewing a file, you can press STOP previous menu (JPEG menu). to move There four Slide : Speed options > (Slow), >> (Normal), >>> (Fast) and II (off). Use v/V/b/B to highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are JPEG SLIDE SHOW Use vVbBto to the highlight (Slide Show) then press ENTER. JPEG STILL PICTURE Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP show, press PLAY (. or >) to advance to the next or once JPEG picture 22 during showing clockwise or while previous viewing a picture file. JPEG TO ROTATE PICTURE Press b / B press again. MOVING TO ANOTHER FILE Press SKIP or a picture to rotate the counter-clockwise. into the CD ".jpg" layout. the files ".jpe" or ".jpeg" extensions, please as ".jpg" file. without names While ips 1. File them to be read to the ? rename ? copying different If the files have If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. 3 ? ? the on and press ENTER. highlight extensions when a by are ".jpg" extension will not be able this DVD/CD Receiver. Even shown Explorer. as JPEG image files in though Programmed Playback MP3 CD WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert a disc. REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when Press REPEAT to select disc. The repeat icon a desired repeat mode. JPEG ? Program a 1/104 MP3 List playing appears. below. 2. 0:00:00 can Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 ? ? TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu 2 Select or a select track " the on MP3/WMA Menu 1. to 2. (Add)" place erase "List", then press PROGRAM icon then press ENTER to the selected track on the "Program" list. place Repeat Use vVto select the track that you wish to from the Program list. additional tracks on the list. " Press CLEAR. Alternatively, select icon then press ENTER to place the on the Program list. Repeat to erase tracks on (Delete)" selected track additional the list. ote You can add all tracks in the disc. Select " (Add All)" icon then press ENTER. ERASING THE COMPLETE PROGRAM LIST 3 Select the track you want to start playing on the "Program" list. Press MENU to move to the next Use v / V to select page. 4 ENTER to start. Playback begins programmed the tracks. or the order in which you Playback stops after all of the tracks "Program" resume 5 back, (Del all)", then press ENTER. ote Press PLAY To " list have played normal playback select a on in The programs are also cleared when the disc is removed. the once. from track of AUDIO programmed playCD (or MP3/WMA) list and then press PLAY. 23 Operation DivX Disc Using this DVD/CD Receiver you Insert 1 Operation a appears disc and close the on the TV 0:00:00 can play DivX disc. DivX disc tray. The DivX menu compatibility as follows: ?A v ailable with this player is limited screen. 720x576 1/12 resolution size of the DivX file is under (W x H) pixel. DIVX ? List The file name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 ? Movie Folder 4 Movie Folder 6 Movie Folder 8 ? a folder, and press ENTER. A ? list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on " express in the DivX mark on the dis" _ If the number of the screen frame is 1 2 impossible code to may be displayed as play. Movie Folder 7 Press v / V to select (different by language). If there is file, it Movie Folder 5 by the remote to highlight 4 Press STOP to exit. operate normally. If the video and audio structure of recorded file If the file is recorded with ports 3 30 per or audio is out- putted. ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. not is not interleaved, either video and press ENTER. second, this unit may over * some of GMC, the unit sup- of the record level. 1-point GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 There encoders, like DivX are or Xvid, have this option. different levels of GMC 1-point, 2-point, or 3-point encoding, usually called GMC. otes ? Be to select "SUBTITLE ON" mode before sure DivX file ? playback ENTER every time. When the subtile has more than two languages in the original by pressing subtile is only file, available. ? The Pro ? The DivX files in your memory card will not be able to be play. a logic II Sound mode is not available for DivX file. Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz - within 24 ? Bit 40 24 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - (MP3), Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. 1 If you connected speakers to your DVD/CD Receiver, setting the distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The 2 Use 3 Use setup v menu v appears. listener at the / V to select the AUDIO B to move to Distance option then press then press B to is highlighted. move Press b / B to 4 appears. adjust the Distance of the selected Speaker Setup option to the third level. "Select" ote You Press ENTER and 5.1 time. speaker. the second level. / V to select the same Speaker Setup menu adjust the distance speakers (left & right) only. can of Center speaker and Rear Test AUDIO Press b / B to test the Adjust Speaker Size Front Left Small Volume 0 dB Distance 2 m Test the volume to match the memorized in the Front L of each signals Rear speaker. volume of test signals system. (L) Right (R) → Center → → Front Rear Left (L) Right (R) → → SubWoofer Off Select Move Return Enter 5 Use b / B to select the desired 6 Adjust options using 7 Press ENTER to confirm your selection. The unit returns to the previous menu. v speaker. / V / b / B buttons. Speaker Select speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Speaker, SubWoofer, Rear speakers (Left), or speakers (Right)) a ote Certain speaker settings are prohibited by Digital licensing agreement. the Center Rear Dolby Size Since the speaker settings are fixed, you cannot change them. Volume Press b / B to adjust the output speaker. (-5dB +5dB) level of the selected ~ 25 Operation Additional Information Last Condition Memory This DVD/CD Receiver Controlling DVD memorizes the settings user for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its setthe latest stop position is automatical- the TV Your remote control is DVD/CD Receiver as capable well as of operating your limited functions of LG TV. Follow the instructions below to operate for your LG TV. player. tings memorized, ly recalled. Before 1 using the remote select the device to be To s witch different control, press the TV operated. the remote control mode device), be to (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize of settings disc if you switch off the DVD/CD Receiver before commencing to play it. 2 The POWER, CH(E/D), VOLUME (+/-), and INPUT buttons on remote control are used to operate the LG TV. a Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. Screen Saver The Setting appears when you leave the DVD mode for about five minutes. button screen saver player in Stop ote If the remote control does not System TV, try the other code Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote control for more than 5 seconds to be able to select system (PAL, NTSC or When the selected a AUTO). system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD Receiver is connected with Multi NTSC: system TV. Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. 26 (E/D) originally supplied Due to the variety or use the remote control with the LG TV. of codes used OUR COMPANY cannot control will operate your particular (LG and Gold Star) by manufacturers, guarantee that the operate every model of LG TV. remote with Radio Operation Presetting You can preset make tuning, the radio stations 50 stations for FM and AM Before (MW). that you have turned down the vol- sure Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM 2 3 the remote control until FM on in the (MW) appears display or 2 until the 3 then release. when the DVD/CD Receiver tunes in station. "TUNED" and "STEREO" appear in the 4 5 display stereo a program) (D/E) PR(D/E) repeatedly to select the preset station you - Use manual or automatic tuning, the remote control 6 again. the remote control on For automatic TUN The station is stored. 7 Repeat steps (+) station with Press TUNING weak a etc.,). tuning in step b TUN(-) repeatedly. press or 2. TUN (+) B on press and hold TUN(-) b or B for about two seconds on the remote tuning, in step 3 manually. Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is appeared in the and then press PROG./MEMO. cleared. display window again, the stations are If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" will go off by itself and change to mode. the number buttons on the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 To clear all the stored stations preset radio station directly a can use to select signal repeatedly or to tune in the station display AV 1, 3 to 6 to store other stations. You a (DVD/CD, or control. To select To tune in want. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. For manual the preset number you want. Press PROG./MEMO. the remote control on To listen to non-preset radio stations the remote control to select on Press select another function mode preset number will flash in the display window. Press PR window. Press POWER to turn the DVD/CD Receiver off the remote control. on FM appears in the or To turn off the radio window. Press PROG./MEMO. A (for display (MW) Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. on panel for about two seconds frequency indication starts to change, Press BAND until AM The last received station is tuned in. or the front Scanning stops 1 window. And then every time you press BAND, FM and AM (MW) changes alternately. Press and hold TUNING to the radio Listening a (within 3 seconds). For your reference If an FM program is Press MONO/ST. noisy panel so that "STEREO" disappears in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo on the front effect. To improve reception Reorient the supplied antennas. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 27 Operation Other Functions Sleep Timer Setting XTS You You cally 1 set the DVD/CD Receiver to turn off automati- can at a Press SLEEP to set the desired The SLEEP indicator and play 2 time. specified sleep sleep time. time appears in the dis- window. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. (Excellent True Sound) enjoy the vivid stereophonic sound of the digital original source without any signal distortion. can Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... Tips: XTS- 1: sound XTS- 2: source front Using the Headphone Connect a stereo headphone PHONES connector. Jack plug ( 3.5mm) The into the speakers are automatically disconnected plug in a headphone (not supplied). Selecting can use the VCRs IN, AV2 IN. Refer Input or on Press AUX and D.INPUT the supplied operation. repeatedly on the desired input source. with remote Each time you press this button, the mode of the function changes in the following sequence: AV1: for selecting the analog signal from AV1 AUDIO IN & VIDEO IN Connectors. AV2: for selecting the analog signal from AV2 AUDIO IN & VIDEO IN Connectors. ote You can also select the FUNC. button 28 via the by playing rear speakers the sound same as the You can operate both XTS- 1 and XTS- 2 simultaneously and it can complement the relative degrading of the sound pitch of the woofer at the XTS- 2 mode. on the The XTS- 2 mode is input source by pressing front panel. temporarily disabled when from 2.1 CH to 5.1 CH and it is enabled when changing changing it to 2.1 CH. XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON other units connected to the AV1 to the owner's manual control to select the when you Source the unit for further information (L/R) effect ote Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. (L/R) of sound at woofer speakers. repeatedly. Mute You sense for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER playing the movie with the weak bass relatively to the general music, it enforces the XTS- 3: Dimmer When → XTS-P OFF setting changes in Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Tu rkish 8482 Burmese 7789 Irish 7165 Polish 8076 Tu r kmen 8475 Byelorussian 6669 Italian 7384 Po r tuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 8471 8479 Country Codes Choose a country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Dutch Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM Pa raguay PY Ukraine UA Czech CZ JP Philippines PH United States US KE Poland PL Uruguay UY KW Por tugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Republic AF Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg Country Code Country Ethiopia Fiji SG SK UG 29 Refrnce Tr oubleshooting Check the following guide for the possible cause of a before problem contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Insert does not work. No Plug that the DVD or, audio CD indicator in the DVD display is a disc. (Check lit.) picture. ? The TV is not set to receive DVD signal ? output. Select the on the TV appropriate video input mode so the picture from the DVD/ CD Receiver appears ? The video cable is not connected ? securely. There is no sound or ?T ? The ? equipment connected with the audio cable is not set to receive DVD The playback picture is jacks The audio cables not connected are Select the correct input mode of the you can hear the sound from the DVD/CD Receiver. ? securely. so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ?T ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? Insert ? screen. the TV. urn on audio receiver signal output. ? the TV securely. The connected TV power is turned off. a on Connect the video cable into the ? very low-level sound is heard. only into the securely connecting cable is damaged. dirty. the urn on equipment connected with the audio cable. it with a new one. poor. The DVD/CD Receiver does not start playback. a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) ? An disc is inserted. unplayable ? Insert a (Check the disc system and Regional code.) type, colour ? The disc is placed upside down. ? disc. playable Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ?Amenu is dirty. on the TV screen. on the disc tray correctly guide. ? Clean the disc. ? Press the SET UP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? Wipe or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The ? dirty. and speakers components connected poorly. are The DVD/CD Receiver is located too close to the TV. 30 rating function Rating ? Clean the disc. ? Connect the speakers and components securely. ?M ove your TV away from the audio ponents. com- Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ?T une in the station in with automatic No stations have been preset or preset ? Preset the stations manually. Refrnce (page 27). stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. ? sensor pointed at the ?P oint the remote control at the remote of the DVD/CD Receiver. The remote control is too far from the sensor ? DVD/CD Receiver. ? There is an Use the remote control within about 23 ft obstacle in the path of the of the DVD/CD Receiver. (7 m). ? Remove the obstacle. are ? Replace panel ? Press DIMMER remote control and the DVD/CD Receiver. ? The batteries in the remote control flat. The front panel display is too dim. ? Nothing display. is displayed on the front the batteries with on new ones. the remote control. 31 Specifications Power Power Refer to main label Mass Genral External dimensions CD/ VD x H x D) AM [MW] x 54 x 350 Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL mm 5°C to More than 75 dB (1 kHz, NOP, output 87.5 10.7 MHz 60 dB 140 - 522 - (Mono) 10,000 Hz 1,620 kHz 450 kHz 70W+70W(8Ωat1kHz,THD10%) Front: 70W + 70W (THD 10 %) (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 70W Inputs Outputs AV Surround*: 70W 70W + (8Ω Designs 32 kHz, THD at 1 Subwoofer*: 150W IN, MIC Jacks THD 10 (4Ω at 30 Hz, ( 3.5mm) S-VIDEO, MONITOR, PHONES: (32 Ω, Type Impedance Frequency Response 1 Centre Speaker Way 150 Input Power Input Power H Speaker x - D) (1m) Passive Subwoofer 1 Way 2 Speaker (LHS-55TBW) 1 150 Speaker 4Ω 20,000 Hz - 1 Way 86 dB/W (1m) 40 - 1,500 Hz 82 dB/W 70W 70W 150 W 140 W 140 W 300 W 280x1200x280mm Weight V) 8Ω 20,000 Hz 86 dB/W Rated x 2 %) %) 1.0 speaker 10 (LHS-55TBC) 8Ω Sound Pressure Level (W 1 108.0 MHz - (LHS-55TBS) Suplied Acesori LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 Stereo mode Net 20 kHz 0.5 % output Net Dimensions nm More than 70 dB Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Max. 650 laser, wavelength 625/50, NTSC 525/60 Satellite Speakrs status: Horizontal 35°C, Operation 200 Hz to 20 kHz Surround mode Amplifer 430 5% to 85% Component Video output FM kg Temperature: S-video Video (W 3.9 Operating conditions Operating humidity Video Tuner Refer to main label supply consumption 2..38kg (1m) 500x83x90mm 195x402x360mm 0.71kg 6.2kg ?Speakers..........................6?Speakercables......................6 ?AMloopantenna.....................1?FMantenna.........................1 ?Remotecontrol......................1?Batteries(AAA).......................2 ?Videocable.........................1 and specifications are subject to change without notice.