LH-T3602SE_NA4MLLA_ENG DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T3602SE (Main Unit: LH-T3602 Speakers: LHS-36SES, LHS-36SEW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully completely. this and CAUTION: The CAUTION apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. (dripping as or vases, CAUTION the Power Cord appliances recommend they be placed upon dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch Most CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER concerning a (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE circuits. Check the PERSONNEL. specification page of this owner's manual to be certain. This lightning flash with arrowhead symbol within equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric an Do not overload wall outlets. Overloaded wall loose damaged or wall outlets, outlets, extension cords, power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions frayed shock to persons. could result in electric shock The exclamation examine the cord of your appliance, and if its appearance indicates damage or deterioration, triangle point within an is intended to alert the equilateral user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. it, discontinue replaced with use an HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. LASER KLASSE 1 LASER PRODUKT LUOKAN 1 LASER unplug appliance, and have the cord replacement part by an exact that the LAITE LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. CAUTION: This To product employs a Laser System. proper use of this product, please read this owner's manual carefully and retain it for future reference. ensure Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments procedures other than those or the performance of specified herein may result hazardous radiation exposure. To prevent direct exposure to laser in beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. 2 physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure PRODUCT KLASS 1 Periodically authorized servicer. exits the CLASS 1 fire. of the Protect the power cord from WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK or plug is easily accessible. Introduction Maintenance and Service MaintenanceandService.................3 Beforeuse.............................4 FrontPanel/RearPanel...................5 RemoteControl.........................6 Installation and a chapter before service technician. HANDLING THE UNIT Setup TVConnections.........................7 Optional Equipment Refer to the information in this contacting Connections . . . . . . . . . . .8 When shipping AerialConnections......................8 Please SpeakerSystemConnection...............9 .10 Displaying Disc Information on-screen InitialSettings.........................10 GeneralOperation......................10 Language...........................10 Display.............................11 materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed . . . . . at the near the surface. To clean the surfaces Dimmer...............................20 Maintaining . . . . . . . . . . . . Mute.................................20 UsingHeadphoneJack..................20 XTS/XTSpro...........................20 VIRTUALsound........................20 SoundMode...........................20 insecticide spray player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. are moistened Do not or on the unit .16 Playing an Audio CD or MP3/WMA file ProgrammedPlayback..................16 ViewingaJPEGfile....................17 PlayingaDivXMoviefile.................18 .19 PresettingtheRadioStations ListeningtotheRadio...................19 SleepTimerSetting.....................20 . as or plastic products in contact long period of time. since they leave marks Additionalfeatures.....................15 . such a Cleaning . liquids with the unit for Generalfeatures.......................14 . volatile use the unit. Do not leave rubber Others..............................13 . packing the exterior surfaces clean Do not 5.1SpeakerSetup.....................12 Lock(ParentalControl).................13 carton and original shipping factory. Keeping Audio..............................12 Operation save the the unit strong solvents such use thinner, as these as might damage alcohol, benzine, the surface of the unit. the Unit The DVD/CD Receiver is a high-tech, precision optical pick-up lens and disc drive parts worn, the picture quality could be device. If the are dirty or diminished. REFERENCE Depending on the operating environment, regular inspection and maintenance are recommended after LanguageCodes.......................21 every 1,000 hours of AreaCodes...........................21 For Troubleshooting.....................22-23 Specifications.........................24 service center. details, please use. contact your nearest authorized 3 Introduction Before of Types use Playable Discs DVD To ensure proper use of this product, please read this owner's manual carefully and retain for future (8cm/12cmdisc) reference. Video CD This manual provides information on the (VCD) (8cm/12cmdisc) operation Audio CD and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location. (8cm/12cmdisc) In addition, this unit SVCD and CD-R About the " Symbol Display MP3, WMA, JPEG " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that Note: special notes and operating features. Tip: Indicates tips and hints for making the task easier. is applicable only symbol. to the disc of the following symbols represented by the one or DivX files. as the Notes rear on a regional code printed on the rear of the play only DVD discs labelled same can of the unit Regional or globe DVD and finalized DVD±R/RW Video CDs number must match your DVD code or the disc cannot play. Regional WMA Discs JPEG Discs DivX Discs Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world- patents issued and pending. "DTS" and "DTS Digital Surround" are Inc. Inc. clearly visible on with the one or more cover. This player's regional If you try to play a DVD with a different regional code from your player, the message "Check MP3 Discs 4 a numbers in it Audio CDs Systems, Systems, "ALL". Codes Most DVD discs have wide DVD-RW, DVD+RW, titles, a Regional Code This unit has unit. This unit A section whose title has play CD-RW that contains audio Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions. specific Used in this Manual Indicates can Notes: DVD video disc. Symbol or registered trademarks of Digital Theater Copyright 1996, 2003 Digital Theater All Rights Reserved." Code" appears on the TV screen. Front Panel/Rear Panel MIC 1/MIC 2 Connect 2 or a microphone to MIC 1 or MIC PHONES connector to both sockets. STANDBY/ON DISC Lights Press and hold down this button about 3 mode OPEN/CLOSE button red when the receiver is in seconds, then press repeatedly Standby VOLUME controller DISPLAY Window Remote sensor TUNING(-/+) /SKIP(.bb/BB>) USB Port Connect to to select other function. (off). a USB MONO/ST./ port of P./STEP multimedia (USB Introducin FUNC./PLAY Tray STANDBY indicator memory etc.) buttons STOP Power Cord SPEAKER connectors FM Antenna connector L AUDIO R AM Loop Antenna connectors MONITOR OUT connector AV1 AUDIO Do not touch the inner panel. Electrostatic permanent damage Input (L/R)/VIDEO pins of the jacks on discharge may cause the IN Connectors rear to the unit. 5 Remote Control (Z) OPEN/CLOSE and closes the disc Opens tray. AUX Selects POWER Select the output To (CD/DVD) source System's tuner (FM ly bands) directly select numbered or options in enjoy great an sound effect. Selects b/B/v/V Selects Search backward or Displays the disc's Title VOLUME To Remote Control Enter a radio station's sequence. into the a track number the on MUTE ZOOM RETURN Removes the setup menu. volume Operation Range About 30° in each direction in front of the remote sensor Remote control Remove the the remote new batteries. Never mix different battery battery installation cover on control, and insert (size AAA) batteries with aligned correctly. Caution 6 frequency program menu or a mark on the MARKER SEARCH menu. sensor Do not mix old and menu. CLEAR Removes Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote Angle: Program tuner. REPEAT A-B Adjusts microphone or removes MEMO. all VOL.(V/v) menu, if available. (+/-) adjust speaker volume. Accesses REPEAT echo volume selection. PROG. (X) PLAY (B) MIC menu TITLE PAUSE/STEP Adjusts the TUN.(-/+) (b/B): playback. VOL.(V/v) menu. To tune in the desired radio station. (./>) STOP ( x ) Repeats in the Select programme of Radio. REVERSE/FORWARD SKIP ECHO option PRESET(v/V): forward. Repeat chapter, track, title, an display. (left/right/up/down) Acknowledges . SCAN/SLOW(bb/BB) Reverse/ Forward slow language (DVD). ENTER DVD disc. menu on a subtitle DISPLAY MENU Accesses the a Accesses On-Screen SETUP menu menu. Selects the VIRTUAL sound Selects the sound mode. setup MARKER SEARCH VIRTUAL language (DVD) or audio channel (CD). or removes panel during point during playback. a Displays SOUND Accesses of the SUBTITLE audio an the front on SEARCH AUDIO Selects change brightness window MARKER Marks sound. To off automatical- System to turn specified time. in power-on status. a XTS pro enjoy a Press to natural and realistic more at display menu. To the multimedia files. DIMMER service, programme number a enjoy Set the and AM 0-9 numerical buttons Select source. SLEEP BAND Select the input USB DVD types of batteries (standard, alkaline, etc.). the rear of two R03 and Installation and Setup TV Connections Make the one of the capabilities following connections, depending existing equipment. on of your Tips: Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using the supplied (V). Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, System or other devices as necessary to Stereo make the best connections. Caution: Make sure directly the DVD/CD Receiver is connected to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Rear of TV VIDEO INPUT V L AUDIO R Rear of DVD/CD Receiver 7 Connections Optional Equipment Connect Connect the VCR to the AV IN connectors. a Connect the USB player, etc.) port of to the USB USB a port on Aerial Connections Memory (or supplied FM/AM aerial for listening to the radio. MP3 the front of the unit. Connect the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial Rear of VCR Front of DVD/CD Receiver N connector. OUT VIDEO USB AUDIO (L) AUDIO (R) Notes: To Memory, Player (or Memory Card Reader, etc.) VIDEO OUT To AV IN AUDIO prevent noise pickup, keep the AM Loop aerial away components. from the DVD/CD Receiver and other To AUDIO OUT (L/R)/ MP3 Be to fully extend the FM wire aerial. connecting the FM Wire aerial, keep possible. sure After (L/R)/ VIDEO L AUDIO R AM FM Wire aerial To Remove the USB from the unit 1. Choose different function mode a (x) twice in or Loop aerial (supplied) (supplied) press the STOP a row. 2. Remove the USB from the unit. L AUDIO R Notes: Don't extract the USB device in Music files files can This unit (MP3/WMA), image be played. can not use operating. (JPEG) files and DivX USB HUB. Recommended Memory Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro) Compatable with : FAT16,32 Only use the memory cards recommended. Devices which require additional program installation Flash Card Compact - - when you have connected the unit to not In a computer case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for porper operation. A primary partition of drive is supported to four. If there is an extention partition it is not supported. If the drive of USB device is two folder is move to displayed on the previous the up more, a drive If you want to after you select a folder, or screen. menu press RETURN. Digital camera and mobile 8 are supported. phone are not supported. it as horizontal as Connection Speaker System Connect the speaker cords to the speaker terminals. possible surround sound, adjust the speaker parameters (volume, distance, etc.). To obtain the best Notes: Be sure to match the appropriate -- to terminal If the cables --. speaker on are cable to the the components: + to + and reversed, the sound will be distorted and will lack base. If you use front rating, adjust excessive speakers the volume output on the About Ferrite Core Be sure cables to attach the ferrite (for connecting This ferrite core can with low maximum carefully to speakers. (Optional) core to this 1. Press the to the unit). once on core 2 core stopper [a] of the ferrite 3. Close the ferrite InstaliodSeup 1 speaker reduce noises. How to attach the ferrite 2. Wind the cable input avoid the ferrite core to open. core. 3 unitl it clicks. The Note: Attach the ferrite length short as here is much as possible. core near the unit (Refer to the fig.3 and comment.). 80 mm 9 Displaying Disc Information Initial on-screen You can loaded 1. display various information about the disc on-screen. Press DISPLAY to show various playback information. The items 2. displayed differ depending playing status. type or You can change Title select an (Track) -- the disc By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 10 to 13. To display and exit the Menu: Press SETUP to display the menu. SETUP will take you back to initial by pressing v / V and setting by pressing b / B. A second press of screen. item select the or on Settings Current title (or track). (or tracks). number/total number of titles Chapter Current chapter number/total number of chapters. Time Elapsed playing time. Audio Selected audio language or channel. -- -- To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control. GENERAL OPERATION -- Subtitle Angle Sound -- -- -- Selected subtitle. Selected angle/total number of angles. no button is screen Press SETUP. The 2. Use v / V to select the desired option then press B to move to the second level. The screen shows Selected sound mode. pressed for a display disappears. few seconds, the Setup menu appears. the current setting for the selected alternate setting(s). Note: If 1. item, as well as 3. Use v / V to select the second desired press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP on- or PLAY to exit the option Setup then menu. LANGUAGE LANGUAGE OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original Move Select OSD Select a language for the Setup menu and on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio (disc audio), subtitles, and the disc menu. Original the disc -- Refers to the was track original language in which recorded. language, press number corresponding 4digit number according to the language code list on page 21. If you enter the wrong language code, Other -- To select another buttons then ENTER to enter the press CLEAR. 10 DISPLAY DISPLAY TV 16:9 Aspect Display Widescreen Mode Move TV Select Aspect 4:3 -- 16:9 Display Display Select when -- a Select when standard 4:3 TV is connected. a 16:9 wide TV is connected. Mode Mode setting works only when the TV Aspect mode is set to "4:3". Letterbox -- Displays a wide picture with bands portions of the screen. InstaliodSeup on the upper and lower Panscan on -- Automatically displays the entire screen the wide and cuts off the picture portions that do not fit. 11 AUDIO 5.1 Each DVD disc has Set the receiver's variety of audio output options. AUDIO options according to the a type of audio system you Press ENTER and 5.1 On Vocal On Speaker Move Small Volume 0 dB Distance 0 m Off Select Select Control (DRC) format, you can hear a program's soundtrack in the most accurate and realistic thanks to audio 3. Adjust options using Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this Select Dolby Digital only Return Use b / B to select the desired 4. effect. Move 2. presentation possible, digital technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). *1: menu Front L Test With the DVD* 1 Speaker Setup AUDIO Select Speaker Setup DRC Size Dynamic Range for the built-in 5.1 channel appears. AUDIO 5.1 following settings surround decoder. 1. use. Speaker Setup Make the Enter speaker. v / V / b / B buttons. Press ENTER to confirm your selection. Returns to the previous menu. selection Speaker speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) a Note: Vocal Certain Set Vocal to On only DVD is The karaoke channels playing. when a multi-channel karaoke mix into normal stereo sound. on the disc will speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the change speaker settings settings. fixed, you are cannot the Volume Press b / B to speaker. (-5dB adjust the output 5dB) level of the selected ~ Distance If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the Press b / B to speaker. (You same time. the Distance of the selected adjust adjust can't front / Woofer speakers) Test Press b / B to test the of each signals the volume to match the volume of test memorized in the Front Left Rear 12 speaker. Adjust signals system. (L) Right (R) → Center → → Front Rear Left (L) Right (R) → → SubWoofer LOCK (Parental Area Code Control) Enter the code of the LOCK Rating Unlock Password **** Area Code US whose standards area used to rate the DVD video disc, based on were the list on page 21. Select "Area Code" 1. on the LOCK menu then press B. Follow 2. Move step 2 as shown previous paragraph (Rating). Select Select the first character 3. Blocks of rated DVDs based playback content. Not all discs are 1. Select the LOCK "Rating" on on Press B and select the second character 4. their v / V buttons. using Rating using v / V buttons. rated. menu Press ENTER to confirm your Area code selection. 5. then press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. OTHERS OTHERS and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. Input password a 3. Select a Rating rating 1-8: from 1 to 8 PBC On DivX(R) Registration Select InstaliodSeup the v / V buttons. using Rating one (1) has the most rating eight (8) is the least restrictions and Select Move restrictive. PBC Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating press SETUP to exit the menu. Set Playback Off: Video CDs with PBC enter or change password. 1. Select Password 2. Follow step 2 as on the LOCK shown above then press B. (Rating). change the password, press ENTER when the "Change" option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 3. Press SETUP to exit the 1. Select Password on 2. Press SETUP to display 3. Input the are played can to the same Audio CDs. information, visit www.divx.com/vod. 1. Select 2. Press ENTER while "Select" is selected and the "DivX(R) Registration" option then press B. clear it using the rent the www.divx.com/vod. Follow the instructions and a disc for playback on this unit. menu. Setup or VOD service at download the video onto the played according registration code will appear. Use the registration code to purchase 3. Press ENTER to exit. menu. 6-digit number "210499" and password is cleared. ENTER. The as videos from DivX the LOCK are provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more menu. you Off. We forget your password If you forget your password, following steps: or DivX(R) Registration menu To If you to On the PBC. way can (PBC) On: Video CDs with PBC selection, then Password You Control press Note: All the downloaded videos from DivX be played back on VOD can only this unit. 13 Operation General features Buttons Z (OPEN X (PAUSE) / CLOSE) Opens (. closes the disc or During playback, Press X SKIP Discs Operations / >) tray. press X to pause repeatedly to playback. play Frame-by-Frame. During playback, press next chapter/track or to current chapter/track. SKIP Press SKIP . twice briefly (. to >) to go to the beginning of the or return to the step back to the previous chapter/track. SCAN (m / M) During playback, press SCAN (m or M) repeatedly required scan speed. DVD : 5 steps (X2, X4, X8, X16, X100) DivX disc, Video CD :4 steps (X2, X4, X8, X16) WMA/MP3, Audio CD : 3 steps (X2, X4, X8) to select the REPEAT During playback, desired DVD Video discs: Video A-B press REPEAT repeatedly to select a repeat mode. Chapter/Title/Off CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off During playback, each press of A-B button to select point point B and repeats a sequence from point A (Starting point) to point B (End point). A and Press REPEAT A-B to exit. ZOOM During playback or pause mode, press ZOOM to enlarge image (3 steps). You can move through the zoomed picture using bBvV the video buttons. TITLE If the current DVD title has appears on the screen. a menu, the title Otherwise, the disc menu menu may appears. DVD MENU (SUBTITLE) The disc menu appears on the screen. During playback, press SUBTITLE repeatedly language. to select desired subtitle (AUDIO language) During playback, press AUDIO repeatedly different audio language or audio track. (AUDIO channel) Press AUDIO to hear a repeatedly during playback to hear a (STER., LEFT or RIGHT). different audio channel SLOW 14 Pause mode, press SLOW (m or M) to select the required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16) Video CD : T (1/2, 1/4, 1/8, 1/16) a Notes general features: on If you press SKIP (>) Chapter (Track) playback, Last Scene once the during Repeat repeat playback Memory This receiver memorizes last that is viewed. The last scene from the last disc remains in memory the disc from the receiver or cancels. scene even if you remove switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. Zoom may not work on some DVDs. The A-B repeat function is available only in the current track. Note: This receiver does not memorize the Additional features switch off the receiver before Time Search To start System at any chosen time playing on the disc: scene commencing of to a disc if you the disc. play Select Press v / V to select the time clock icon and appropriate system mode for your system. If NO DISC appears in the display window, press and hold P./STEP on the front panel or "--:--:--" appears. select Press DISPLAY 1. 2. 3. Input the You must select the TV during playback. required start time in seconds from left to remote control for hours, minutes, and If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. right. Press ENTER to confirm. 4. Playback the NTSC: PAL: Select when DVD/CD Receiver is connected Select when DVD/CD Receiver is connected with PAL-TV. Marker a start can playback To enter points. displayed. with NTSC-TV. Marker Search You than 5 seconds to be able to system does not coincide with system of your TV, normal colour picture may not be starts from the more system (PAL, NTSC). When the selected selected time. To enter a desired point the TV screen on from up to nine memorized at the marker, press MARKER a the disc. The Marker icon appears to enter up to nine on briefly. Repeat markers. To Recall or 1. During disc search menu 2. Clear a Marked Scene playback, appears press SEARCH. The marker on the screen. Within 10 seconds, press b / B to select number that you want to recall or clear. Press ENTER and 3. marked scene. playback a marker starts from the Or, Press CLEAR and the marker number is erased from the list. 4. You on can play any marker by the marker search menu. inputting its number Screen Saver The Stop appears when you leave the unit in mode for about five minutes. screen saver 15 Playing This unit an Audio CD Audio CDs play can or or MP3/WMA file MP3/WMA files The program function enables you to store your favorite tracks from any disc in the receiver memory. A recorded media. program MP3/ WMA/ Audio CD Once you insert Audio CD, MP3/WMA files recorded media an a menu the TV on or 1. 2. Insert Select Program disc. a track the on "List", then press PROG. or " additional tracks place 0:00:00 on the list. 1/104 MP3 List contain 300 tracks. (Add)" icon then press ENTER to place the selected track on the "Program" list. Repeat to 1/12 Audio CD a select functions. Refer to page 14. 0:00:00 can Audio CD and MP3/WMA Discs: screen. appears Press v / V to select a track/file then press PLAY or ENTER and playback starts. You can use variable playback Programmed Playback JPEG List Program Track1 Note: Music Folder 1 Track2 Music Folder 2 Track3 Music Folder 3 You Track4 Music Folder 4 Track5 can add all tracks in the disc. Select " ( Add All)" Music Folder 5 Track6 Music Folder 7 Track8 Music Folder 8 3. Tips: move to the next page. On a CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word top of the on menu is 4. MP3 / WMA disc limited as compatibility with this highlighted. player ENTER to start. To resume normal select playback, MP3/WMA) is follows: Sampling frequency: within 32 48 kHz (MP3), within 24 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) Playback begins in played once. playback from programmed (or track of AUDIO CD a list and then press PLAY. - - a file extension other than an MP3/WMA file ".mp3" ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is to format should be ISO 9660 File should have must incorporate ? They should not contain ? The total number of files an a : the disc should be less than 999. This DVD/CD Receiver requires discs and recordings to optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. repeat a desired repeat mode. repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): a does not Track from play repeatedly. "Program" List Use vVto select the track that you wish to Program list. 2. erase " Press CLEAR. Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks meet certain technical standards in order to achieve Customers should note that disc. The from the " * <>letc. on ? 1. / ? a TRACK: Erasing maximum of 8 letters and .mp3 or .wma extension. special letters such as playing Press REPEAT to select ? playback MP3 / WMA files.We recommend Easy-CD Creator, which creates an ISO ? Press REPEAT when ? that you use 9660 file system. names Tracks icon appears. 2. CD-R impossible 1. / ".wma". ? physical Repeat Programmed - The DVD/CD Receiver cannot read that has 16 or list have "Program" - ? Press PLAY the order in which you programmed the tracks. Playback stops after all of the tracks on the 5. ? Select the track you want to start playing on the "Program" list. Press MENU to move to the next page. Press MENU to ? icon then press ENTER. Music Folder 6 Track7 Erasing on the the list. Complete Program Use v / V to select " (Del all)", List then press ENTER. Note: The programs are also cleared when the disc is removed. Viewing This unit a JPEG file Zoom JPEG Each time press ZOOM the order. play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. 1. can Insert a disc and close the The PHOTO menu notes on Zoom appears JPEG disc limited Preview List the video enlage screen. PHOTO in the Zoom off y Press V/b/m to reduce the video the TV on on Press v/B/M to tray. setting change following compatibility image. image. with this player is follows: as JPEG Folder 1 JPEG Folder 2 ? JPEG Folder 3 JPEG Folder 4 Depending upon the size and number of JPEG a long time for the DVD/CD files, it could take JPEG Folder 5 JPEG Folder 6 Receiver to read the disc's contents. If you don't display after several minutes, JPEG Folder 7 JPEG Folder 8 see an on-screen of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels some 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder previous remote to 3. list, use the v / V buttons on the and press ENTER. highlight to move ? to the ? four Slide : Speed options (Normal), >>> (Fast) and II (off). Use v /V /b /B to highlight the Speed. Then, use b / B to select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. > are (Slow), >> x 2048 pixels and burn another disc. The total number of files and folders on the disc Some discs may be incompatible due to a different recording format or the condition of disc. Ensure that all the selected files have the extensions when Tips: There 2760 should be less than 999. ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While viewing a file, you can press STOP previous menu (JPEG menu). as ? --- ? copying If the files have ".jpe" please them File rename names without able to be read though the files Windows by or as into the CD ".jpg" layout. ".jpeg" extensions, ".jpg" file. ".jpg" extension will not be this DVD/CD Receiver. Even are shown as JPEG image files in Explorer. Slide Show Use vVbBto highlight the (Slide Show) then press ENTER. Still Picture 1. Press PAUSE/STEP Operation slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP Moving press again. (. or >) once to advance to the next To rotate while or viewing a previous file. picture Press b / B picture or to another File Press SKIP picture show, press PLAY during showing clockwise or a picture to rotate the counter-clockwise. 17 Playing DivX Movie file a DivX disc as this DVD/CD Receiver you Using 1. Insert a appears disc and close the on the TV play can compatibility with this is limited player follows: DivX disc. ?A vailable resolution size of the DivX file is under tray. The MOVIE menu 800x600 screen. ? The file (W x name H) pixel. of the DivX subtitle is available by 45 characters. MOVIE 0:00:00 List ? Movie Folder 1 If there is impossible code to express in the DivX as mark on the file, it may be displayed Movie Folder 2 Movie Folder 3 Movie Folder 4 " " _ display. Movie Folder 5 Movie Folder 6 Movie Folder 7 ? Movie Folder 8 If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. 2. Press v / V to select a folder, and press ENTER. ? A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons the remote to on Playable press ENTER. ? 3. If you want to view v / V to 4. highlight particular file, press file and press ENTER or PLAY. Tips: Press MENU to move to the next page. MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the a CD with menu is or audio is ".avi DivX file ", ".mpg ", ".mpeg ", ".divx" a a Press STOP to exit. On interleaved, either video outputted. and highlight If the video and audio structure of recorded file is not highlighted. Playable Subtitle format SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable ? Codec format "DIVX3.xx "MP43 ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", ", "3IVX ". Notes: Be sure to select "SUBTITLE ON" mode subtitle file every time before When the subtile has original subtile is only more playing than two microphone You can during not does not work adjust the DivX file Notice for by pressing DivX file languages the ? in the file, can not be during playing a played. DivX file. playing. displaying the Divx subtitle display properly during playback, press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle is 18 displayed properly "AC3 ? Audio format ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz (MP3), 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - within 24 sound mode and VIRTUAL sound If the subtitle does not Playable . available. The DivX files in your memory card The a ? - - - the Radio Stations Presetting You preset can Before tuning, 50 stations for FM and AM make sure Preset radio stations in the DVD/CD Receiver's (MW). that you have turned down the volume. (MW) on the remote control until FM appears in the or AM display Press and hold about two seconds until the starts to TUN.(-/+) for frequency indication Scanning stops a AM (MW) appears in the the remote on preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. change, when the DVD/CD Receiver tunes in or repeatedly control to select the Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. 3. station. - Press PROG./MEMO. A the window. Press PRESET +/- 2. then release. 4. on The last received station is tuned in. BAND, FM and AM (MW) changes alternately. 3. radio stations" (see "Presetting Press BAND until FM 1. window. display And then every time you press 2. memory first left). Press BAND 1. to the Radio Listening on the remote control. To turn off the radio preset number will flash in the display window. Press POWER to turn the DVD/CD Receiver off Press PRESET +/- 5. the on preset number you Press PROG/MEMO 6. the remote control to select want. on the remote control again. Repeat steps For manual 3 to 6 to store other stations. or a station with Press TUN.(-/+) repeatedly station manually. in a weak step signal s elect a Press and hold PROG./MEMO. for about two seconds in the window display again, the stations are If you have accidentally entered into the "ERASE ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "ERASE ALL" display will go off by itself and change to normal mode. 2. TUN.(-/+) repeatedly. tuning, preset radio station directly the number buttons on the remote press 1 then 9 a (within 3 For your reference If an FM program is Press MONO/ST. disappears stereo in the on on seconds). noisy the front display panel so that "ST." window. There will be no effect, but the reception will improve. Press again to restore the stereo effect. To If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. change step preset radio station directly. For example, to listen to preset station 4, press 4 the remote control. To listen to preset station 19, the button Note: To can use control to select To clear all the stored stations appeared in 3 to tune in the To and then press PROG./MEMO. cleared. press tuning press and hold TUN.(-/+) for about two seconds on the front panel. You and "ERASE ALL" is automatic tuning, For automatic To tune in or (DVD/CD, AUX, USB). To listen to non-preset radio stations Use manual The station is stored. 7. select another function mode the preset number, follow the steps improve reception Reorient the supplied antennas. a 5-6 as above. 19 Sleep You can Timer XTS/XTS pro Setting set the DVD/CD Receiver to turn off automatically at a specified The SLEEP indicator and display sleep sleep XTS ON in the NORMAL → → XTS-P ON... XTS-P ON window. changes in time. time appears in the Each time you press SLEEP the 2. setting changes the Press SLEEP to set the desired 1. Each time you press XTS pro the following order. time. following The sound quality of the LG Technology optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. setting unique creates the order. SLEEP180→150→120→90→80→70→60→50→40→ 30→20→10→OFF XTSON When playing the movie with the relatively to the general music, it Note: You can check the time Receiver turns off. Press SLEEP. The display window. remaining before the DVD/CD sense remaining time appears in the weak bass sound enforces the of sound at woofer for you to satisfy with. BYPASS, It creates the high In the mode of 2 CH display effect by playing the sound source rear speakers same as the front speakers. Dimmer via the Note: This function will change the brightness of the display window on the front panel during in power-on status. The XTS mode is Press the DIMMER to 2.1 CH. temporarily disabled when from 2.1 CH to 5.1 CH and it is enabled when repeatedly. changing changing it Mute Press MUTE to mute your unit. You can answer display mute your unit in order, for example, the telephone, "MUTE" indicator flashes in the window. Using Headphone Connect a stereo headphone PHONES connector. The you to VIRTUAL sound press VIRTUAL the Jack plug ( 3.5mm) into the speakers are automatically disconnected plug in a headphone (not supplied). setting VIRTUAL sound. Source Display Effect 2.1 ch. VIRTUAL 3D STEREO 5.1 ch VIRTUAL Multichannel sound 3D STEREO when Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. Multichannel sound The Multichannel sound makes ch sound therefore this mode a 5.1 ch feel 10.1 provides a emotion which you are involved with sound and you feel detailed sound. can Sound Mode You one the enjoy surround sound simply by selecting pre-programmed sound fields according to program you want to listen to (2 ch. sound only) can of the . BYPASS ON STAGE →STUDIO CLUB THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → 20 → → → → → → → → HALL Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu. Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose a area Area code from this list. Code AF Area Code Area Code Area Code ET Malaysia MY Saudi Arabia SA FJ Maldives MV SN Finland FI Mexico MX France FR Monaco MC Senegal Singapore Slovak Republic BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Heard and McDonald Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU Afghanistan Argentina AR Ethiopia Fiji Australia AU Austria AT Belgium SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg UG 21 Troubleshooting Check the following guide for the possible cause of a before problem contacting Correction Cause Symptom No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, is ? picture. a disc. (Check into the audio CD indicator in the DVD does not work. No service. The TV is not set to receive DVD signal ? Select the mode output. display lit.) appropriate the TV on so video the input picture from the DVD/CD Receiver appears TV screen. ? The video cable is not connected ? no sound or The connected TV power is turned off. ?T ? The ? a connected with the equipment not connected are ? ?T ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. connecting cable does not start is damaged. dirty. poor. The DVD/CD Receiver input mode of the so Connect the audio cable into the The power of the equipment connected with the audio cable is turned off. ? is Select the correct jacks securely. securely. playback picture the TV. you can hear the sound from the DVD/CD Receiver. signal output. The audio cables urn on audio receiver audio cable is not set to receive DVD ? The Connect the video cable into the ? very low-level sound is heard. only urn on the equipment connected with the audio cable. ? Insert a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. is ? An the jacks securely. securely. There is on unplayable disc is inserted. ? or display lit.) Insert disc a playable disc. the (Check type, colour system and Regional code.) ? ? The disc is placed upside The disc is not placed ? down. Place the disc with the within the guide. ? Place the disc correctly ? The disc is ?Amenu is ? dirty. on the TV ? The Rating screen. level is set. ? heard. or noise is ? The disc is ? The ? dirty. speakers and components poorly. are ? The DVD/CD Receiver is located too close to the TV. 22 the disc tray guide. menu screen. Cancel the rating Rating function or change level. Clean the disc. Connect the speakers and components securely. connected ? on inside the Press the SETUP button to turn off the Loud hum side Clean the disc. the ? playback down. ? Move your TV away from the audio components. Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ?T ? une in the station Preset the stations manually. (page 19). stations have been cleared (when tuning by scanning preset stations). The remote control ? properly. The remote control is not remote does not work ? sensor pointed at the ? of the DVD/CD Receiver. The remote control is too far from the ? DVD/CD Receiver. ? There is an Point the remote control at the remote sensor Use the remote control within about 23 ft obstacle in the path of the of the DVD/CD Receiver. (7 m). ? Remove the obstacle. are ? Replace panel ? Press DIMMER remote control and the DVD/CD Receiver. ? The batteries in the remote control flat. The front display panel is too dim. ? Nothing display. is displayed on the front the batteries with on new ones. the remote control. 23 Specifications Power Genral Refer to main label supply consumption Weight Power Refer to main label Net 3.9 kg 430 x External dimensions (W x H x D) conditions CD/ VD Video FM Tuner AM [MW] Amplifer 57 x 295 mm 5°C to Operating Operating humidity Temperature: Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) PAL 0.5 % Video 1.0 V 35°C, Operation status: Horizontal 5% to 85% laser, wavelength 650 nm NTSC 525/60 625/50, 150 Hz to 18 kHz More than 75 dB (1 kHz, NOP -6 dB, 20 kHz output 87.5 Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency (1 kHz, at 1W position) (20 kHz LPF) (p-p), 75 Ω, negative sync., RCA jack x 108.0 MHz - or 65.0 - 74.0 MHz, 87.5 60 dB 140 522 (Mono) 1,620 kHz - or 520 - 1,720 kHz 450 kHz 45W Surround mode Front: 45W (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 45W Inputs Outputs AV + 45W (Rated Output Power 30W, 4Ω at 1 kHz, THD 10 %) 45W (Rated Output Power 30W, THD 10 %) + Surround*: 45W + 45W Subwoofer*: 75W (Rated Output Power 30W, 4Ω at 1 kHz, THD 10 %) (Rated Output Power 60W, 8Ω at 30 Hz, THD 10 %) IN, MIC MONITOR, PHONES: (32 Ω, Speaker 1.0 V) Passive Subwoofer (LHS-36SES) Type Impedance Frequency Response : and specifications 3834RT0003Y Way 1 Speaker Way 150 - 20,000 Hz 85 dB/W H x D) subject to change 1 Speaker 8Ω (1m) 45W are (LHS-36SEW) 1 4Ω Rated Designs P/NO 1 Sound Pressure Level x 108.0 MHz 8,000 Hz - Stereo mode Input Power Max. Input Power Net Dimensions (W Net Weight 1 - 10.7 MHz Front/Rear/Center Speakrs LPF/A-Filter) More than 70 dB 65 - 1,500 Hz 87 dB/W (1m) 75W 90W 150 W 105x99x83mm 175x351x270mm 0.45kg 3.4kg without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project