LG SJ8 Owner's manual
Remote control
Replacement of battery
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
ENGLISH
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CDROM for a charge covering the cost of performing such distribution
(such as the cost of media, shipping and handling) upon email
request to opensource@lge.com. This offer is valid for three (3)
years from the date on which you purchased the product.
SOUND EFFECT: Selects a sound effect mode.
F: Selects the function and the input source.
8: Turns down the volume at night.
: Adjusts sound level of Treble, Bass and Sub-woofer.
SIMPLE MANUAL
INFO: Displays the input source information.
AV Sync: Synchronizes the audio and video.
SJ8
SLEEP: Sets the system to turn off automatically at a specified
time.
AUTO VOL: Adjusts too loud or low output volume level
appropriately.
AUTO POWER: Automatically turns on by an input source.
Additional Information
Specification
Power
consumption
Refer to the main label.
AC adapter
yy
yy
yy
yy
Dimensions
(W x H x D)
Approx. 1220 mm x 38 mm x 105 mm
Amplifier
(Total RMS
Output power)
300 W RMS
SMART Hi-Fi
AUDIO
Wireless Multi-room Sound Bar
Model : DA-38A25
Manufacturer : Asian Power Devices Inc.
Input : 100 - 240 V ~ 50 - 60 Hz
Output : 25 V 0 1.52 A
Design and specifications are subject to change without notice.
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download
Owner’s Manual. Some of the content in this manual may differ from your unit.
MODEL
SJ8
*MFL69727353*
www.lg.com
TV Connection
Connect the sound bar and TV using Optical (
HDMI ARC ( ).
Network Connection
) or
The buttons are located on the rear.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
b Set up [External Speaker (Optical)] on your
TV setting menu.
1 · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Standby
F · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Selects function
-/+ · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Adjusts volume
· · · · · · · · · · · · · · · · · · · · Connects wireless network.
· · · · Adds the additional Music Flow product to
your network. (In case that one or more Music Flow
product is connected.)
c Connect the sound bar to the power supply.
d Connect the media server to your home network in
order to enjoy music.
LED indicator: Shows connection status.
If the subwoofer does not make sound, try to connect
manually.
b Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
•
b Turn on the sound bar.
c Pairing is completed.
• Red (Staying on): Standby mode without network
connection.
Rear Panel
LAN
DC IN · · · · · · · · · · · · · · · · · · · · · Connect to AC Adapter.
USB (Service only) · · · · · · · S/W download connector.
LAN · · · · · · · · · · · · · · · · · · · · · · · · · · · · Connect to router.
OPTICAL IN · · · · · · · · · · Connect to an optical device
HDMI IN · · · · · · · Connect to device with HDMI OUT.
HDMI OUT (TV ARC) · · · · · · · · · · · · · Connect to a TV.
•
The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
•
Download LG Music Flow Application
Download “Music Flow Player” on the App Store or
Google Play Store.
TV
The green LED on the rear of wireless
subwoofer blinks quickly.
• White (Staying on): Network connection is
completed.
• Green (Staying on): The first group was set.
All devices should be connected to same router.
a Connect the sound bar to the TV using HDMI
cable.
• White (Blinking): Waiting for network connection
• White (Dimmed): Standby mode with network
connection.
HDMI(ARC) Connection
Subwoofer Connection Manually
aPress Pairing button on the rear of the wireless
subwoofer.
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home network.
TV
b Turn on the sound bar. :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.
b
a Connect the sound bar to the TV using
Optical cable.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
LED indicator
c
a
Optical Connection
Front Panel
d
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
Additional Device Connection
a Connect to the external device like as follow.
>1m
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing F on the
remote control or unit repeatedly.
•
Launch Music Flow Player App
Follow the steps for wired or wireless connection
displayed on the screen.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising