LG | FH6 | LG FH6 Owner’s Manual

OWNER’S MANUAL
HIGH POWER
SPEAKER
SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
FH6
*MFL69492406*
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
Getting Started
This device is equipped with a portable battery or
accumulator.
Safety way to remove the batteries or the battery
from the equipment: Remove the old batteries
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat to
human and animal health, to dispose of old batteries
or the battery put it in the appropriate container
at designated collection points. Do not dispose of
batteries or battery together with other waste. It is
recommended that you use local, free reimbursement
systems batteries and accumulators. The battery shall
not be exposed to excessive heat such as sunshine,
fire or the like.
CAUTION: No naked flame sources, such as lit
candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
1
Refers to class II equipment.
Getting Started
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
3
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
4
Table of Contents
Table of Contents
1
Getting Started
2
6
6
6
7
7
8
10
12
13
Safety Information
Unique Features
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Top panel
Front panel / Rear panel
How to place the unit
2Connecting
14
14
14
15
Optional Equipment Connection
– AUX IN Connection
– USB Connection
– Antenna Connection
3Operating
16
16
17
18
18
18
18
19
19
20
20
22
22
22
23
24
24
Basic Operations
– USB Operations
– Selecting a folder and
an MP3/WMA file
– Deleting an MP3/WMA file
Playback Effect
– DJ EFFECT
– SCRATCH Effect
– AUTO DJ
– DJ PRO
Using BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
Using the Music Flow Bluetooth App
– About “Music Flow Bluetooth” App
– Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
– Activate Bluetooth with “Music Flow
Bluetooth” App
Radio Operations
– Listening to the radio
24
24
24
25
25
25
26
26
28
29
29
29
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
Sound adjustment
– Setting the sound mode
– Setting the USER EQ
Advanced Operations
– Recording to USB
– JUKE BOX Playback
Other Operations
– Turn off the sound temporarily
– Displaying file information
(ID3 TAG)
29 – DEMO
29 – Using Microphone
30 – VOICE CANCELLER
30 – KEY CHANGER
31 – LIGHTING effect
32 Setting the Clock
32 – Setting the Clock through “Music Flow
Bluetooth” App
32 – Using your player as an alarm clock
33 – Sleep Timer Setting
33 – Dimmer
33 Auto power down
34 – AUTO POWER On
34 – Auto function change
35 LG Sound Sync
36 Wireless Party Link Connection
Table of Contents
5
4Troubleshooting
37 Troubleshooting
37 – General
1
5Appendix
38
39
39
39
General specifications
Maintenance
– Handling the Unit
Trademarks and Licenses
2
3
4
5
6
Getting Started
Unique Features
1
Bluetooth®
Getting Started
Listens to music stored on your Bluetooth device.
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to page 22.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Playable file
Requirement
Music file requirement
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : 2,000
yy Maximum folders : 200
yy File extensions : “.mp3”/ “.wma”
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
Getting Started
7
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy This unit recognizes up to 2,000 files.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
yy The USB function of this unit does not support all
USB devices.
8
Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby/On) : Switches the unit ON or OFF.
LIGHTING:
1
-- Turns ON/OFF the lighting effects.
Getting Started
-- Press and hold to turn on/off the Flash Lighting.
VOL (Volume) +/- : Adjusts speaker volume.
F (Function) : Selects the function and input source.
(Mute) : Mutes the sound.
PRESET·FOLDER W/S :
-- Searches for a folder of MP3/WMA files. When a
USB containing MP3/WMA files in several folders
is being played, press PRESET·FOLDER W/S to
select the folder you want to play.
-- Chooses a preset number for a radio station.
JUKEBOX/MEMORY :
-- Stores radio stations.
-- Deletes all the saved stations.
-- Selects JUKE BOX mode.
-- Makes your favorites list.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 19)
DELETE :
-- Deletes MP3/WMA files.
-- Deletes a song on the programmed list.
Replacement of battery
(R03
)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Getting Started
9
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT : Listens to your files repeatedly or
randomly.
0 to 9 numerical buttons : Selects numbered files or
preset number.
TUNING-/+ : Selects the radio stations.
CLOCK : Sets a clock and checks a time.
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
ALARM : With the ALARM function you can turn
USB play and Tuner reception on at a desired time.
-- Searches for a section within a file.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
d/M (Play/Pause) :
VOICE CANCELLER : You can enjoy the function
while playing the music, by reducing singer vocal of
music in the various source.
-- Starts or pauses playback.
-- Selects Stereo/Mono (Horizon mode only).
INFO :
-- Sees information about your music. An MP3 file
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- In status of Wireless Party Link Connection, device
name of SLAVE unit appears in the MASTER unit
and Device name of MASTER unit appears in the
SLAVE unit.
SOUND EFFECT : Chooses sound impressions.
BASS BLAST : Selects BASS effect directly.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)
DJ EFFECT : Selects DJ EFFECT mode. (Refer to page
18).
SET : Confirms the setting.
KEY CHANGER ( / ) : Changes the key to suit
your vocal range.
DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.
* : This button is not available.
USB REC : USB direct recording.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
10 Getting Started
Top panel
1
Getting Started
a
b
n
c
m
d
l
k
e
f
j
i
g
h
Getting Started 11
aUSB
You can play or record sound by connecting the
USB device.
cMIC (Microphone) VOL +/dVOICE CANCELLER
VOICE CANCELLER can reduce the Vocals of
Singer in certain source/content allowing you to
enjoy the music.
Press to switch this Mode On or Off.
eSCRATCH / SEARCH & LEVEL CONTROL
- Turns clockwise or counterclockwise to make
Scratch sound.
- Searches a folder or a file.
- Adjust DJ EFFECT level.
fDJ EFFECT
Selects DJ EFFECT mode. (For more information
refer to page 18).
gLIGHTING
- Turns ON/OFF the lighting effects.
- Press and hold to turn on/off the Flash Lighting.
hCLUB, DRUM, USER (DJ PRO)
Press and hold to select CLUB, DRUM or USER
sound effect for mix.
(If you want to use USER, you have to register a
source with “Music Flow Bluetooth” app.)
1, 2, 3 (DJ PRO PAD)
Press a desired sound pad.
jSEARCH
Moves to folder or file in selection mode.
k BLUETOOTH
Changes input source to the Bluetooth.
(Even in power off mode, if you press
BLUETOOTH, then power is on and automatically
changed to Bluetooth function.)
lUSER EQ / BASS BLAST
- Selects the sound effect created by your own.
- Press and hold to select BASS effect directly.
mKEY CHANGER ( / )
Changes the key to suit your vocal range.
nWIRELESS LINK
Selects Wireless Party Link mode.
1
Getting Started
bUSB REC / DEMO
- Records to USB.
- Shows Demo mode.
iOK
Selects a folder when searching a file.
12 Getting Started
Front panel / Rear panel
aDisplay window
1
Getting Started
a
b
c
d
e
f
g
h
i
b U (Skip/Search)
- Skips forward.
- Searches for a section within a file.
- Selects the radio stations.
cT (Play/Pause)
- Starts or pauses playback.
- Selects Stereo/Mono (Horizon mode Only)
dY (Skip/Search)
- Skips backward.
- Searches for a section within a file.
- Selects the radio stations.
e+/- (Volume)
Adjusts speaker volume.
fF (Function)
Selects the function and input source.
g1/!(Standby/On)
hMIC (Microphone) 1 / 2 jack
iRemote control receiver
jFM ANTENNA
kAUX IN (L/R)
lPower cord
j
k
l
Getting Started 13
How to place the unit
Automatically optimize the sound
>>Caution
yy Do not sit on the unit or push the unit.
Otherwise it may result in malfunction and
causing personal injury and/ or property
damage.
yy Do not place the unit on an unstable position
and place the unit at a safe distance from the
child’s reach.
If the installation method is changed (‘Horizontal
Vertical’ or ‘Vertical Horizontal’), it indicated by
‘VERTICAL MODE’ or ‘HORIZON MODE’ in the display
panel.
yy Be careful that the unit should not fall down.
Otherwise it may result in malfunction and
causing personal injury and/ or property
damage.
Horizontal
yy Watch out the foot when you lay the unit in
horizontally.
Vertical
,,Note
On the horizon mode, press d/M on the remote
control to change the tuner from mono to
stereo.
1
Getting Started
It helps automatically optimize the sound to suit the
installation conditions (Horizontal or Vertical).
14 Connecting
Optional Equipment
Connection
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
2
Connecting
If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
Red
Audio cable
White
,,Note
Removing the USB device from the unit :
1. Choose a different function.
2. Remove the USB device from the unit.
DVD, Blu-ray player etc.
Connecting 15
Antenna Connection
Connect the supplied FM antenna for listening to the
radio.
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
2
Connecting
,,Note
Be sure to fully extend the FM wire antenna.
16 Operating
Basic Operations
USB Operations
1. Connect the USB device to the USB port.
2. Select USB function by pressing F on the remote
control or on the unit.
To
Playback
Pause
3
Do this
Press d/M on the remote control or
T on the unit.
Press d/M on the remote control or
T on the unit during playback.
Operating
Press and hold C/V on the
Searching
remote control or Y/U on the
for a section
unit during playback and release it at
within a file
the point you want to listen to.
Press 0 to 9 numerical buttons on
Selecting a file
the remote control to go to the
directly
desired file directly.
By using C/V buttons :
Press V on the remote control or
U on the unit to go to the next
file.
Skipping to Playing less than 2 seconds, press
the next/ C on the remote control or Y
previous file on the unit to go to the previous file.
Playing after 3 seconds, press C
on the remote control or Y on the
unit to go to the beginning of the
file.
Press REPEAT on the remote
control repeatedly. Refer to the note
for details about the display change
Playing
repeatedly or
RPT1 -> RPT*DIR -> RPT ALL ->
randomly
RANDOM -> OFF
*DIR : Directory.
,,Note
yy When you play JUKE BOX list, only RPT 1 and
RPT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
Operating 17
Selecting a folder and
an MP3/WMA file
On the unit
,,Note
yy USB Folders/Files are recognized as below.
*
1.Press SEARCH and rotate SCRATCH / SEARCH
& LEVEL CONTROL until a desired file appears.
You can also search a folder if you press SEARCH
again.
2.Press OK or T to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or T again. The selected
file is played.
On the remote control
1.Press PRESET·FOLDER W/S on the remote
control repeatedly until a desired folder appears.
3
Operating
2.Press d/M to play it. The first file of folder will play
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
18 Operating
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE.
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by pressing
PRESET·FOLDER W/S on the remote control
and press DELETE.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
The display changes in the following order.
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
3
Operating
If you want to exit the current mode, press
DELETE repeatedly until “FORMAT” appears, and
then press DELETE once again.
2. To delete file/folder or format, press and hold
DELETE.
>>Caution
Playback Effect
The unit supports various sound and playback effects
: DJ EFFECT, SCRATCH, DJ PRO, AUTO DJ.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as Flanger/
Phaser/Wah/Delay sound effect.
1. Press DJ EFFECT to select a desired DJ EFFECT
(FLANGER, PHASER, WAH, DELAY, DJ OFF).
2. Turn SCRATCH / SEARCH & LEVEL CONTROL
clockwise or counterclockwise to adjust the DJ
EFFECT level between 0 to 15.
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT Key is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
SCRATCH Effect
You can output and mix the sound effects of the
SCRATCH.
Rotating SCRATCH / SEARCH & LEVEL CONTROL
to mix the scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate SCRATCH /
SEARCH & LEVEL CONTROL.
Operating 19
AUTO DJ
DJ PRO
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across files for uninterrupted
playback.
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 3 sounds effect.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings.
2. Press a DJ Pro. Pad (1, 2, 3) of desired sound.
AUTO DJ RANDOM -> AUTO DJ SEOUENTIAL ->
AUTO DJ OFF
Display
Window
Description
OFF
AUTO DJ OFF
-
RANDOM
AUTO DJ
RANDOM
The music is played
randomly on this
mode.
AUTO DJ
SEQUENTIAL
The music is played
repeatedly on this
mode.
REPEAT
,,Note
yy AUTO DJ mode does not support searching
for a section within a file or to play repeatedly
or randomly.
yy If you move to other functions on AUTO DJ
mode, JUKE BOX mode, Delete mode or AUTO
DJ will be disable.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
,,Note
yy If you want to use USER, you have to register
a source with “Music Flow Bluetooth” app. If
the source is not register to USER, “EMPTY”
or “NO SOUND” appears on the display
window.
yy Initial DJ Pro mode is CLUB sound effect.
yy DJ Pro mode is displayed for 3 seconds when
you press DJ PRO (CLUB, DRUM or USER).
yy The DJ PRO sound is mixed when you press a
DJ Pro. Pad (1, 2, 3).
yy The currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you press a different DJ Pro. Pad
(1, 2, 3) while DJ PRO sound is playing.
3
Operating
Mode
1. Press and hold DJ PRO (CLUB, DRUM or USER)
to select a desired DJ PRO sound effect.
20 Operating
Using BLUETOOTH®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop, PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Codec : SBC
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
1. Turn on the unit.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG FH6 (XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if
your unit has a Bluetooth address
such as 9C:02:98:4A:F7:08, you will see
“LG FH6 (08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi pairing connection is only supported
on Android or iOS devices. (Multi pairing
connection may not be supported depending
on the connected device specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi pairing.
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon. Then “BT” will be appeared on the
display window.
,,Note
yy "PAIRED" will momentarily appear on the
display when you connect other devices for
multi pairing.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
Operating 21
,,Note
yy When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
yy You may not control the Bluetooth device
with this unit.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the BT function, adjust the
volume to a proper level on the Bluetooth
device.
yy If it is not in the BT function, only one device
can be connected.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
3
Operating
yy Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
,,Note
yy When this unit connected with multiple
Bluetooth devices, only one device which
you are playing keeps Bluetooth connection
when you change the function to the others.
22 Operating
Using the Music Flow
Bluetooth App
,,Note
yy Only Android OS is available to use “Music
Flow Bluetooth” app with this unit.
yy It is recommended to use the latest version
of app.
3
About “Music Flow Bluetooth”
App
Operating
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Here is introduce a few of the many features of
“Music Flow Bluetooth” app.
Multi Juke box : Your entertainment increases three
fold when you connect up to 3 Bluetooth phones at
the same time. Play music from all three phone and
create a customized playlist from all the phones.
Sampler Creator : Record effects on your
smartphone and very simply sync them via
Bluetooth to the system. Be as creative as you can
be.
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Operating 23
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
2. Tap [Menu] and select the unit you want.
3. If you want to get more information to operate,
tap [Help] on the [Setting] menu.
,,Note
yy “Music Flow Bluetooth” app will be available
in the software version as follow;
yy If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
yy When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
3
Operating
-- Android O/S : Ver 4.0.3 (or later)
24 Operating
Radio Operations
Presetting the Radio Stations
Be sure that both FM antenna is connected. (Refer to
page 15)
Before tuning, make sure to turn down the volume.
Listening to the radio
1.Press F on the remote control or on the unit until
FM appears in the display window.
The last received station is tuned in.
3
2. Auto tuning :
Press and hold TUNING-/+ on the remote
control or Y/U on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Operating
Or
Manual tuning :
Press TUNING-/+ on the remote control
repeatedly or Y/U on the unit.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press T on the unit or d/M on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception. (Horizon mode only)
You can preset 50 stations for FM.
1.Press F on the remote control or on the unit until
FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or Y/U
on the unit.
3.Press JUKEBOX/MEMORY on the remote
control. A preset number will blink in the display
window.
4.Press PRESET·FOLDER W/S on the remote
control to select the preset number you want.
5.Press JUKEBOX/MEMORY on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER W/S or 0 to 9 numerical
buttons on the remote control.
Deleting all the saved stations
1. Press and hold JUKEBOX/MEMORY on the
remote control for two seconds.
“ERASEALL” will flash up on the unit display.
2.Press JUKEBOX/MEMORY on the remote
control to erase all the saved radio stations.
Operating 25
Sound adjustment
Setting the USER EQ
Setting the sound mode
1.Press USER EQ / BASS BLAST on the unit.
“USER EQ” is displayed.
This system has a number of pre-set surround sound
fields. The displayed items for the Equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
On Display
BASS (BASS BLAST)
STANDARD
2.Press USER EQ / BASS BLAST repeatedly until
desired setting appears in the display window.
3. Rotate SCRATCH / SEARCH & LEVEL
CONTROL to adjust the value.
Description
Reinforces the treble,
bass and surround
sound effect.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
You can enjoy
optimized sound.
,,Note
yy By pressing and holding
USER EQ / BASS BLAST for 3 seconds on
the unit you can directly select BASS (BASS
BLAST) effect.
yy By pressing BASS BLAST on the remote
control, you can directly select BASS (BASS
BLAST) effect.
3
Operating
POP
CLASSIC
ROCK
JAZZ
You can adjust the sound level of Bass, Middle and
Treble as your preference.
26 Operating
Advanced Operations
To select recording bit rate
Recording to USB
2. Press C/V on the remote control to select a
bit rate.
You can record a various sound source to USB.
(AUX, Tuner)
1. Connect the USB device to the unit.
2.Press F on the remote control or on the unit to
select a function you want to record.
3. Start the recording by pressing USB REC /
DEMO on the unit or USB REC on the remote
control.
3
To stop recording, press USB REC / DEMO on
the unit or USB REC on the remote control again.
Operating
Pausing recording
During recording, press T on the unit or d/M on
the remote control to pause recording. Press it again
to restart recording.
1. Press and hold USB REC / DEMO on the unit or
USB REC on the remote control for 3 seconds.
3. Press USB REC / DEMO on the unit or USB REC
on the remote control to finish the setting.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Operating 27
,,Note
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
yy Multi card reader device or External HDD can
not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You can record various sound using DJ
EFFECT, SCRATCH, DJ PRO or MIC.
yy You may not store more than 2000 files.
yy It’ll be stored as follows.
AUX
Tuner
Tuner : The current recording frequency is shown.
3
Operating
yy You can control recorded MIC sound according
to MIC volume.
28 Operating
JUKE BOX Playback
Editing JUKE BOX
JUKE BOX function enables you to make a playlist of
your favorite files from a USB device. A playlist of up
to 100 files can be entered.
1. Press and hold JUKE BOX / MEMORY on the
unit to enter the edit mode.
(Playing will be stopped when you press the
button.)
Making JUKE BOX list
1. Press and hold JUKEBOX / MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press the
button.)
2. Select a file by pressing C/V on the
remote control or by turning SCRATCH /
SEARCH & LEVEL CONTROL on the unit.
3
3.Press JUKE BOX / MEMORY to save the file.
Operating
4. Repeat steps 2 - 3 to store other files.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control
to select the JUKE BOX program number.)
5.Press JUKE BOX / MEMORY once again.
To play the JUKE BOX list, press d/M after you make
the list.
,,Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press JUKE BOX / MEMORY once. “JUKE BOX ON”
appears on the display window. To play JUKE BOX
list, press d/M on the remote control or T on
the unit.
To cancel it, press JUKE BOX / MEMORY once.
“JUKE BOX OFF” appears on the display window.
2.Press PRESET·FOLDER W/S on the remote
control to select a file to edit.
3.Press C/V on the remote control to save
the file.
4.Press JUKE BOX / MEMORY.
5. Repeat 2 to 3 to store the other files.
6.Press JUKE BOX / MEMORY once again.
To play the JUKE BOX list, press d/M after you edit
the list.
Deleting JUKE BOX list
Deleting function only works in the edit mode.
1. Press and hold JUKE BOX / MEMORY on the
remote control to enter the edit mode.
2. Select a song by pressing PRESET·FOLDER W/S
on the remote control repeatedly.
3.Press DELETE while a song is selected.
,,Note
yy If there is no JUKE BOX list, “JUKE BOX
NONE” appears on the display window when
you press JUKE BOX / MEMORY.
yy JUKE BOX is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
SCRATCH / SEARCH & LEVEL CONTROL.
yy JUKE BOX list is cleared in the case below.
-- Removing the USB device.
-- Deleting or recording music files in the USB
device.
Operating 29
Other Operations
Turn off the sound temporarily
Press
on the remote control to mute your sound.
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
To cancel it, press
level.
again or change the volume
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by pressing MIC VOL +/button on the unit.
,,Note
yy When not using the microphone, set the
MIC VOL to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
DEMO
yy If sound through the microphone is extremely
loud, it may be distorted. In this case, press
MIC VOL to minimum.
In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions with demo sound in the display
window. To cancel the DEMO function, press
USB REC / DEMO once more.
,,Note
yy While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will
play back automatically.
yy If your microphone’s sound feels not loud
though MIC VOL is max, you can adjust only
audio source volume lower.
-- Follow below step.
1. Press and hold VOICE CANCELLER on
the unit.
2. Reduce Audio Source Volume by
rotating SCRATCH / SEARCH & LEVEL
CONTROL counter-clockwise on the
unit. To initialize it, power off.
3
Operating
While playing an MP3 file containing file information,
you can display the information by pressing INFO.
yy If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the MIC VOL.
Displaying file information
(ID3 TAG)
30 Operating
VOICE CANCELLER
KEY CHANGER
You can enjoy the function while playing the music,
by reducing singer vocal of music in the various
source.
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
Press the VOICE CANCELLER and “ON” will appear
in display window.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
3
yy This function is available USB or BT
(Bluetooth) Function.
Operating
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
yy This function is available to use only when a
microphone is connected.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy It is not available on the MONO source.
yy To initialize it, change the Function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
yy To sharp the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
yy To flatten the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
,,Note
yy This function is available USB or BT
(Bluetooth) Function.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy To initialize it, change the Function, disconnect
the microphone or change the music.
yy This function may not be initialized depending
on the status of connected devices.
Operating 31
LIGHTING effect
This function offers a party atmosphere by operating
the lighting on the unit.
Press LIGHTING on the remote control or on the
unit.
RHYTHM PARTY
WATER FOREST
OFF
FIREWORK
CITYGLOW
SPACE
(MYSTYLE)
,,Note
yy If you want to enjoy the dynamic lighting
effect, select the RHYTHM or the PARTY.
yy If you want to use MYSTYLE, you have to
register a source with “Music Flow Bluetooth”
app.
yy On the lighting mode, you can select the
mode by using SCRATCH / SEARCH &
LEVEL CONTROL.
yy Press and hold LIGHTING button to turn on/
off the Flash Lighting.
3
Operating
yy Lighting function is available in all functions.
yy Lighting mode retains its previous mode
when you first press LIGHTING, press again
to change modes.
32 Operating
Setting the Clock
1. Turn the unit on.
1. Turn the unit on.
2. Press and hold CLOCK.
2. Press and hold ALARM.
3. Select time mode by pressing C/V on the
remote control.
3.Press C/V on the remote control to
change the hours and minutes and press SET to
save.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6.Press SET.
3
Using your player as an alarm
clock
7. Select the minutes by pressing C/V on
the remote control.
Operating
8.Press SET.
Setting the Clock through
“Music Flow Bluetooth” App
4.Press C/V on the remote control to select
function and press SET to save.
- Press C/V on the remote control to
select a memory No. when you select Tuner and
then, press SET.
If there is no memory No., this step is skipped.
5.Press C/V on the remote control to
change the volume and press SET to save.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 22)
yy You can set alarm after you set the clock
time.
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
yy If you set the clock time and alarm, you
can check the alarm setting information
by pressing ALARM even when the unit is
turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM.
Operating 33
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “SLEEP 10” appears,
and then press SLEEP on the remote control once
again while “SLEEP 10” is displayed.
,,Note
yy You can check the remaining time before the
unit is turned off.
yy Press SLEEP to check or change the
remaining time.
Press SLEEP on the remote control once. The display
window will be darkened by half.
To cancel it, press SLEEP on the remote control
repeatedly until dim off.
,,Note
All the LED turns off when Dimmer is being
operated.
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 20 minutes.
The unit will also turn itself off after six hours if the
Main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only
MASTER unit in case of Wireless Party Link
connection. In case of SLAVE unit, Auto power down
is available after disconnection SLAVE unit and
MASTER unit.
How to disconnect the wireless
network connection or the wireless
device.
Turn off the unit by pressing the power button for
more than 5 seconds.
3
Operating
Dimmer
Auto power down
34 Operating
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
LG TV or Bluetooth
This unit recognizes input signals such as Bluetooth
and LG TV, and then changes suitable function
automatically.
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device. You
can play your music.
,,Note
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
3
Operating
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yy If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an input
source when this unit is turned off.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
,,Note
yy This function is not available during recording
or deleting.
yy This function only works with devices that
were previously connected.
Operating 35
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
1. Turn on the unit by pressing 1 on the remote
control or 1/! on the unit.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
-- Turn off the unit.
-- Changing to a different function.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
the manufacturers or models of your TV.
yy If you connect LG Sound Sync when “Music
Flow Bluetooth” app is connected, control
through the app is available.
yy If you turned off the unit directly by pressing
1 on the remote control or 1/! on the unit,
LG Sound Sync will be disconnected. To use
this function again, you should reconnect the
TV and the unit.
yy If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and
the LG TV is connected.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
3
Operating
2.Press F on the remote control or on the unit until
LG TV function is selected.
,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
36 Operating
Wireless Party Link
Connection
The output sound of (MASTER) unit is expanded
to (SLAVE) unit.
It is compatible with unit that supports Wireless
Party Link.
,,Note
yy If you using the LG Sound Sync, this function
is not available. If you connect the LG TV
Function, “NOT SUPPORT” appears in the
display window.
yy You can use microphone in the SLAVE unit
only. In case of SLAVE unit, some functions
are supported only.
yy When Wireless Party Link is disconnected,
SLAVE unit is changed to BT function.
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
yy Wireless Party Link connection will be
disconnected when you turn off the unit or
press WIRELESS LINK on the unit.
3
Operating
yy MASTER unit and SLAVE unit may be
different depending on playback status,
source or setting.
yy Check the following information when
connecting to Bluetooth.
1.Press WIRELESS LINK on the unit. PARTY LINK
MODE SELECT appears in the display window.
2. Rotate SCRATCH / SEARCH & LEVEL
CONTROL on the unit or press Y/U on the
unit to select MASTER or SLAVE.
- unit : Selects MASTER.
-
unit : Selects SLAVE.
Two units try to connect with each other.
3. When this unit is successfully connected each
other, “Slave Device Name CONNECTED” appears
in the MASTER unit. “CONNECTED TO Master
Device Name” appears in the SLAVE unit and
change to SLAVE soon.
-- You can connect only one Bluetooth
device in the MASTER unit. You cannot
connect Bluetooth device to the SLAVE
unit.
-- Wireless Party Link connection is only
supported on Android or iOS devices.
(Wireless Party Link connection may
not be supported depending on the
connected device specifications or OS.)
-- Removable/detachable Bluetooth devices
(ex. Dongle etc.) will not support Wireless
Party Link connection.
-- When Wireless Party Link is connected,
Bluetooth connection is not available in
status of recording or deleting.
Troubleshooting 37
Troubleshooting
General
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not work
properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
No Power.
yy The power cord is not plugged in. Plug in the power cord.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
No sound.
yy Check whether you select right function.
Press function button and check the selected function.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 24 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No light.
LG Sound Sync does not
work.
yy Check the light effects by pressing LIGHTING.
yy Check whether your LG TV supports LG Sound Sync.
yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
4
Troubleshooting
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
38 Appendix
General specifications
General
Power requirements
Refer to the main label on the unit.
Refer to the main label on the unit.
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
Approx. 818 mm x 318 mm x 388 mm
Net Weight
Approx. 17.2 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
60 %
Inputs
Analog audio in (AUX IN)
1.2 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
Microphone (MIC 1/2)
Sensitivity 15 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range
5
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Appendix
System
Frequency Response
80 to 20,000 Hz
Signal-to-noise ratio
More than 75 dB
Dynamic range
More than 80 dB
Bus Power Supply (USB)
5V01A
Amplifier (RMS Output power)
Total output
Front
600 W
300 W × 2 (4 Ω at 1 KHz, 10 % THD)
yy Design and specifications are subject to change without notice.
Appendix 39
Maintenance
Trademarks and
Licenses
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
The Bluetooth® word mark and logos are owned by
the Bluetooth® SIG, Inc. and any use of such marks
by LG Electronics is under license.
Other trademarks and trade names are those of their
respective owners.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
5
Appendix
Download PDF