LG | LX-D5230A | LG LX-D5230A Owner’s Manual

CASA-LX-D5230A._ENG-A100A
DVD Micro Home Theater
System
Owner's Manual
MODEL
:
LX-D5230
LX-D5230A/D/X, LXS-D5230V,
LXS-D5230C, LXS-D5230T,
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change without
Safety
Precautions
CAUTION
NOTES ON COPYRIGHTS:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash
equilateral triangle
with arrowhead
This
symbol
is intended to alert the
within
an
user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
risk of electric
a
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
within
is intended to alert the
an
equilateral triangle
the presence of
and maintenance (servicing)
important operating
user to
instructions in the literature
accompanying
the
product.
TRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this
such
book
as a
case or
equipment
in
confined space
a
similar unit.
CAUTION:
This
To
Digital
ensure
Video Disc
proper
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
manual
carefully and retain for future reference should the unit
require maintenance, contact an authorized service location
service
(see
procedure).
Use of controls,
adjustments, or the performance of procespecified herein may result in haz-
dures other than those
ardous radiation exposure.
To
prevent
direct exposure to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases,
2
should be
placed
on
the
apparatus.
the back of
unique to this unit and not available
requested information here and
permanent record of your purchase.
others. You should record
retain this
Model No.
Serial No.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
on
this unit. This number is
guide
as a
___________________________________
___________________________________
to
Table of Contents
Introduction
.25-27
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............25
.
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
FrontPanelandRearPanel..................6
RemoteControl............................7
DisplayWindow............................8
.
.
.
.
.
.
GeneralFeatures........................25
MovingtoanotherTITLE...............25
25
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................25
Still Picture and
Frame-by-Frame Playback
.
26
SlowMotion.........................26
Repeat............................26
RepeatA-B.........................26
TimeSearch........................26
LastConditionMemory................26
3DSurround........................26
Preparation
Zoom..............................27
Connections............................9-12
MarkerSearch.......................27
9
Connecting to External Equipment or Antenna
ConnectingtoaTV......................10
.11
ConnectingtoOptionalEquipment.
SpeakerSystemConnection...............12
BeforeOperation.......................13-21
AudioAdjustment........................13
SpeakerPositioning...................13
VolumeAdjustment...................13
SpecialDVDFeatures....................27
.
.
.
.
.
.
.
.
.
.
.
.
MUTE.............................13
SoundQualityAdjustment..............13
SURROUND........................13
XDSS
(Extreme Dynamic Sound System)
Glossary for Audio Stream & Surroud
TitleMenu..........................27
DiscMenu..........................27
CameraAngle.......................27
.27
ChangingtheAudioLanguage.
.27
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitle............................27
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
.
.
.
28-29
.
.
.
.
.
28
.28
Pause.............................29
13
MovingtoanotherTrack...............29
RepeatTrack/All/Off..................29
Mode..............................14
Search.............................29
SoundMode........................14
RepeatA-B.........................29
.29
ChangingtheAudioChannel.
OperationwithJPEGDisc...................30
ViewingaJPEGdisc.....................30
MovingtoanotherFile.................30
Mini
.
.
SettingtheClock.....................15
SleepTimerFunction..................15
TimerFunction.......................16
GeneralExplanation......................17
On-ScreenDisplay.......................17
InitialSettings........................18-21
Initial Settings General Operation.
18
Language..........................18
.
.
.
.
.
.
.
.
Picture.............................18
Others.............................19
ParentalControl......................20
SpeakerSetup.......................21
.
OperationwithRADIO...................22-23
Presettingtheradiostations................22
Listeningtotheradio.....................22
RDSFunction-OPTIONAL................23
AboutRDS.........................23
ProgrammeSearch(PTY)..............23
OperationwithTAPE......................24
BasicPlayback/ToStopPlay...............24
TapeCounterReset......................24
.24
ToPlayRewindorFastForward.
Recording...............................24
BasicSetting...........................24
24
Recording from Radio, CD or Auxiliary source
.24
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
StillPicture.........................30
Toflipthepicture.....................30
Torotatepicture......................30
.30
NotesonJPEGRecordings.
ProgrammedPlayback.....................31
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc.........................31
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
Operation
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.31
.31
.31
.31
Reference
Troubleshooting..........................32
LanguageCodeList.......................33
CountryCodeList.........................34
Specifications............................35
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause harm
damage.
to the unit
other material
.
unit.
Indicates
special operating features of this
Indicates
tips and hints for making the task easier.
3
INTRODUC
Before Use
Playable
Discs
ote on DTS-encoded CDs
When
DVD
(8cm/12cmdisc)
playing back such discs, adjust the volgradually, and keep the volume level low. To enjoy
DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be
connected to the digital output of the unit.
(VCD)
(8cm/12cmdisc)
ume
Audio CD
(8cm/12cmdisc)
can
play
a
DTS-encoded CDs, excessive audio level
volume before
Video CD
In addition, this unit
playing
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
DVD-R, DVD±RW,
Kodak PICTURE CD, SVCD, and CD-R or CD-RW that
contains audio titles, MP3, WMA or JPEG files.
Disc-related terms
Title
(DVD only)
The main film content
or
accompanying
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
Notes
the conditions of the
recording equipment or the CD-R/RW (or DVD-R/±RW) disc itself,
some CD-R/RW (or DVD-R/±RW) discs cannot be
played on the unit.
--Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
--
Depending
on
--
you to locate it
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(Video CD and audio CD only)
a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Track
Notes
Some
on
Sections of
DVDs and Video CDs
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content
Scene
some
On
designed by the software manufacturer,
playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
player and DVDs
player is designed and manufactured for playback of region "3" encoded DVD software. The region
Regional
on
the labels of
some
you to locate the scene you want.
A scene is composed of one or several tracks.
3
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
their
Types of video CDs
There
are
two
DVD discs indicates
which type of player can play those discs. This
unit can play only DVD discs labeled "3" or
though
and still
code of the DVD
This DVD
code
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
playback is prohibited by
area
limits.
types of video CDs:
equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
Video CDs
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of
high
resolution
can
be
played
if
they
are
included in
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
4
Before Use
(Continued)
Storing
Precautions
After
Handling the
unit
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
The
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
When
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
or turn
off the
discs
playing,
store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunas there may be a considerable temperature
increase inside the car.
light,
Cleaning discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
To
keep the exterior surfaces clean
use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
Do not
leave marks
on
Cleaning the
the surface.
unit
To clean the cabinet
Use
a
use a
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
use
thinner,
or
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents such
as
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
vinyl records.
Symbols
of the unit.
About the
To obtain
clear
picture
player a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
The DVD
is
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
during operation.
explained in this owner's
that specific DVD video disc.
screen
symbols for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
Handling discs
playback side of the disc.
Hold the disc by the edges so that fingerprints
get on the surface.
VCD1.1
Do not touch the
Do not stick paper
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and Rear Panel
1
13
12
2
11
3
20
10
4
19
14
56
9
7
8
18
15
17
16
1.
CD DOOR
2.
POWER
3.
STANDBY indicator
4.
FUNCTION SELECT buttons
(
STANDBY/ON) button
(OPTIONAL)
8.
PUSH EJECT
9.
VOLUME KNOB
?
?
?
?
?
?
?
?
?
?
?
?
11.?CLOCK
7.
?
?
?
?
?
?
?
?
6
?
XDSS button
Deck
button
TIMER button
12. REMOTE SENSOR
SURROUND
(SURR.) button
EQUALIZER (EQ) button
13. CD OPEN/CLOSE
PLAY MODE button
14. ANTENNA TERMINAL
:
OPTIONAL
PROGRAM/MEMORY button
RDS button
:
16. POWER CORD
OPTIONAL
COUNTER RESET
17. SPEAKER TERMINAL
(COUNTER) button
18. AUXILIARY INPUT JACK
CD SYNC. button
RECORD/ RECORD PAUSE
MODE/RIF button
(zREC/[[)
button
(CD[])/
19. SUB WOOFER CONNECTOR
20.
REPEAT button
CD PAUSE
) button
(
15. VOLTAGE SELECTOR SWITCH
SET button
?
?
HEADPHONE SOCKET
6.
-
10. DISPLAY WINDOW
(TUNER/BAND, DVD/CD, TAPE, AUX)
5.
position
(
PHONES)
-
3.5mm
STEP button
TUNING
(-/+) buttons
(-/+) buttons
CD SKIP/SEARCH (
PRESET
/
TAPE REWIND/FAST FORWARD
) buttons
PLAY (
) button
REVERSE PLAY (
) button
STOP (
)/CLEAR button
:
) buttons
(
OPTIONAL
/
?
OPTICAL OUT CONNECTOR
S-VIDEO CONNECTOR
VIDEO OUT CONNECTOR
:
OPTIONAL
Remote Control
1.
POWER button
2.
NUMBER buttons
FUNCTION SELECT buttons
3.
1
18
2
(TUNER, DVD/CD, TAPE, AUX)
4.
XDSS button
5.
TAPE FUNCTION buttons
-
-
3
17
4
-
-
16
-
PLAY
15
REVERSE PLAY
STOP
(F: optional)
(x)
RECORD/ RECORD PAUSE
(For
in
use
highlighting
a
8.
?
13
7
?
(Use the
TITLE button to
included
on
12
DVD video
display the title
discs.)
screen
(FF/GG)/
(A-B)
/ CLEAR buttons
REV./FWD buttons
11. MARKER/ SEARCH/ SLEEP buttons
12. VOLUME -/+ buttons
13.
?
?
10
menu
SUBTITLE button
10. SLOW
9
GUI
TITLE button
ANGLE/ ZOOM/ REPEAT A-B
9.
8
on a
screen.)
SELECT/ENTER button
7.
6
(z/[])
selection
screen, TITLE and MENU
14
(FF/GG)
(G)
ARROW buttons
6.
5
TAPE REWIND/ FAST FORWARD PLAY
DISPLAY/ RETURN/ SET UP buttons
MENU button
(Use the MENU button
11
screen
included
14. EQUALIZER
on
to
display the menu
discs.)
DVD video
(EQ)/ SOUND/ AUDIO buttons
15. DVD/CD CONTROL buttons
-
-
-
-
(G), PAUSE ([])/STEP, STOP (x)
(.), SKIP/NEXT (>)
PLAY/SELECT
SKIP/PREV.
PROGRAM
REPEAT
SKIP ./>
:
Press and hold button for about
two seconds for search function.
16. SURROUND
17. PRESET
(SURR.) button
(D/E)
buttons
18. MUTE button
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
battery installation
and press
Detach the
the buttons.
Distance: About 23 ft
the
(7 m) from the front of the
remote sensor
Angle:
battery
cover on
of the remote control,
and insert two R03 (size AAA)
rear
batteries with
About 30 in each direction of the front of the
and
aligned correctly.
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Display
Window
1
TITLE
PROG
2
CHP/TRK
1
ALL
3
RDS PS
ST
PTY RT
4
4
MP3
7
PL II
D
REC
SLEEP DTS
6
1.
?
?
?
2.
?
?
PROGRAM
(PROG) indicator
CHAPTER/ TRACK
?
?
?
8
?
?
RDS indicator
?
?
FM STEREO RECEIVING indicator
LEVEL indicator
?
(CHP/TRK)
indicator
PLAY/PAUSE indicator
?
4.
?
7.
REPEAT indicator
3.
5.
6.
TITLE indicator
:
OPTIONAL
?
?
MUTE indicator
?
TAPE REVERSE PLAY indicator
:
OPTIONAL
TAPE PLAY indicator
PLAY MODE indicator
SLEEP indicator
DTS indicator
:
OPTIONAL
MP3 indicator
DOLBY PROLOGIC indicator
DOLBY PROLOGIC
(II)
indicator
DOLBY DIGITAL indicator
TIMER indicator
RECORDING indicator
ANGLE indicator
5
Connections
Connecting
?
to External
Equipment
or
Antenna
Connect the AUX IN
AUDIO OUT
using
(L/R) jacks on the unit to the
(L/R) jacks on the VCR, LD player, etc
the audio cables.
?Connect
the
supplied
FM/AM antennas for
listening
-
Connect the AM
loop
antenna to the AM antenna
connector.
otes
-
To
prevent noise pickup, keep the AM loop antenna away
from the unit and other component.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as horizontal
as
PREATION
Connect the FM wire antenna to the FM antenna
connector.
ip
Press AUX to select
"AUX" appears
possible.
to
the radio.
on
input to these jacks.
display window.
the
[OPTIONAL]
AUDIO OUT
L
R
9
Connections
Connecting
to a TV
If the TV has
input,
an
S-VIDEO
connect the unit
with S-VIDEO cable.
Make
the
one of the following connections, depending
capabilities of your existing equipment.
on
on your TV and other equipment you wish
to connect, there are various ways you could connect
player. Use
one
of the connections described
TV
using
jack
S-VIDEO IN
sure
the unit is connected
Select the correct AV
directly
to the TV.
input
your TV.
Do not connect your unit to TV via your VCR. The picture image could be distorted by the copy protection
system.
10
on
the unit to the VIDEO
S-Video connection
Connect the S-VIDEO OUT
Make
on
the video cable
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
Caution
--
jack on the
supplied (V).
below.
best connections.
--
Connect the VIDEO OUT
IN
Tips
Depending
the
Video connection
cable
jack
on
the TV
jack on the the unit to the
using the optional S-Video
(S).
otes
The
signal
of S-VIDEO OUT
jack
will output
only
when the function mode is selected to CD/DVD.
When you connect the unit to your TV, be sure to
unplug both units from the wall
turn off the power and
outlet before
making
any connections.
Connections
Connecting
to
Optional Equipment
PREATION
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/ Video
receiver equipped with a multi-channel decoder
(Dolby DigitalTM, MPEG 2 or DTS)
jack on the unit to the
amplifier .Use an optional
Connect the OPTICAL OUT
OPTICAL IN
jack
on
your
audio cable.
Notes
--
If the audio format of the
digital output does not match
capabilities of your unit, the unit will produce a
strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your unit is equipped
with a Digital Multi-channel decoder.
the
--
--To
see
Screen
Caution:
--
--
the audio format of the current unit in the On-
Display,
press AUDIO.
Due to the DTS
Licensing agreement, the digital output will be in DTS digital out when DTS audio stream
is selected.
The sound is muted during playback on an audio CD
recorded in dts.
11
Connections
Speaker System
Connection
Connect the
speakers using the supplied speaker cords.
To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
If you feel lack of bass
Connect
an
frequency
active sub woofer to the
SUB WOOFER OUT connector using
monaural audio cord
a
(not supplied).
otes
Be
sure to
match the
speaker
the sound will be distorted
If you
use
front
speakers
cord to the
appropriate
terminal
with low maximum
input rating, adjust
ers.
Do not disassemble the front
12
on
the
components:
+
to
+
and
--
to
--.
If the cords
are
reversed,
and will lack base.
cover
of
supplied speaker.
the volume
carefully
to avoid excessive
output
on
the
speak-
Before
Audio
Operation
Adjustment
Volume
Speaker Positioning
?Turn
In the
case of normal position use the 6 speakers (2
speakers, center speaker, 2 rear speakers and
subwoofer).
If you want to play the excellent bass sound or Dolby
Digital surround, you should connect a subwoofer.
level,
front
?
?
height.
But
normally place
it above
or
You
the
mute your unit in
In the
to further
the
of
case
rear
set the
a
disperse
smaller
wall set the
rear
speakers
towards
a
be
placed
ears.
wall
or
the sound.
size, if the audience is near to
speakers opposite each other, and
above 60-90cm than the listener's
in any front
answer
display window.
a
choose between 4 fixed sound
desired sound mode
using
impressions.
the EQUALIZER
(EQ).
It
FLAT
:
ROCK
:
POP
:
frequency response
More bass, more treble
Less bass, less treble
CLASSIC
:
For orchestral music
Linear
?Headphone Jack
Connect
a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
Subwoofer
can
to
Quality Adjustment
can
Select
ears.
This
again
activate stereo sound
You
room
rear
speakers
rear
or use
order, for example, to
flashes in the
telephone,
?To
ceiling
?
can
Sound
speakers
Place left and right behind the listening area.
These speakers recreate sound motion and atmosphere
required for surround playback. For best results, do not
install the rear speakers too far behind the listening position
is also effective to direct the
level,
are
below the
above the level of the listener's
to increase the sound
+
to decrease it on the remote control.
Press MUTE to turn off the sound, press
Rear
or
-
restore.
television.
and install them at
counterclockwise to decrease it.
MUTE
speakers
According to your listening position set up the speakers for
And by hearing position set up the interval
distance.
equal
between speakers to 45 degree.
Center speaker
It is ideal that the center speakers and front speakers
or
Use VOLUME
VOLUME
Front
same
?
?
Adjustment
VOLUME knob clockwise to increase the sound
position.
Subwoofer
Center
Front
Speaker
(Left)
SURROUND
Speaker
Front
To activate surround mode
Speaker
(Right)
Press SURROUND
Rear
Rear
Speaker
(Left)
Speaker
(Right)
(SURR.)
to reinforce surround
effect.
SURROUND ON
SURROUND OFF
XDSS (Extreme
Dynamic Sound System)
Press XDSS to reinforce treble and bass.
The "XDSS ON" indicator lights up.
To cancel it press XDSS again.
The "XDSS OFF" indicator lights up.
-
Speaker Positioning Example
-
13
PREATION
Before
Mini
Operation
Glossary
for Audio Stream &
Sound Mode
Surround mode
BYPASS
You
Allows you to enjoy 5.1(or 6) discrete channels of high quality
tal audio from DTS program sources such as discs, DVD and
digi-
Digital Surround
delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity
throughout a true 360 degree sound field. The term DTS is a
trademark of DTS Technology, LLC. Manufactured under license
from DTS Technology, LLC.
compact discs, etc.bearing
the trademark. DTS
VCD2.0
DVD
PROL
VCD1.1
MTRX
MUSIC
MOVIE
CD
3D SUR
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
repeatedly until the sound mode
display window as below.
Press SOUND
you
want appears in the
BYPASS
→
PRO LOGIC
PL2 MATRIX
→
→
PL2 MOVIE
3D SURROUND
→
→
PL2 MUSIC
→
BYPASS...
When DVD is inserted.
The
Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program
source. If you play DVDs with
mark, you can enjoy even
better sound quality, greater spatial accuracy, and improved
dynamic range.
"
"
You
can
change
AUDIO button
the
on
Digital
Audio
Output mode by pressing
during playback.
the
the remote control
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
Use this mode when
which carries the
being in
intensity
a
playing
"
"
movie theatre
movie
or
Dolby Digital 2
provides the
mark. This mode
or
can
only
an
Pro
Logic
3 ENG
2 ENG
4 ENG
DTS
D
D
→→→
2CH
5.1 CH
5.1 CH
2CH
be obtained
(II)
Dolby
example)
1 ENG
D
live concert house-an effect with
through DOLBY PRO LOGIC
SURROUND. The effect of the front/back/left/right movement of
the sound image, as well as the sense of fixed position in the
sound image, is much clearer and more dynamic than before.
which
For
channel
effect of
II creates five full-bandwidth
output channels from
When Video CD
or
Audio CD is inserted.
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
For
two-channel sources. This is done using an advanced, high-purity
matrix surround decoder that extracts the spatial properties of the
original recording without adding any new sounds or tonal col-
example)
STER.
→→
LEFT
RIGHT
STER.
→→
LEFT
RIGHT
Video CD
:
orations.
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all pro-
grams encoded in
field
Dolby Surround. The result is enhanced sounddirectionality
approaches the quality of discrete 5.1-chan-
:
Audio CD
that
nel sound.
MUSIC mode:
The Music mode is for
use with any stereo music recordings, and
a wide and deep sound space. The Music mode includes
controls that allow the sound to be tailored to individual listening
provides
ote
If you select the 5.1 channel
tastes.
D
5.1 CH
MATRIX mode:
The Matrix mode is the
same as
the Music mode
directional enhancement
enhance
mono
logic is turned
signals by making them
except that the
off. It may be used to
seem "larger." The Matrix
mode may also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause disturbing surround
stereo
Digital
Audio
Output
mode
1 ENG
()
signals from a logic decoder. The ultimate "cure" for poor
reception may be simply to force the audio to mono.
FM
,
the "BYPASS" sound mode is
only
selected.
For your reference
?
The unit memorizes the last mode
settings for
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labelled with the
logo.
Dolby Surround encoded programs are labelled with
the
logo.
-D TS Digital Surround discs are marked with DTS.
each
?
source
-
3D SURROUND
-
produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback
from two conventional stereo speakers instead of the five or more
speakers normally required to listen to multi-channel audio from a
This unit
can
home theatre. This feature works with DVD discs encoded with
Dolby Pro Logic and Dolby Digital audio tracks.
BYPASS
Software with multichannel surround audio
according
14
to the way it
was
recorded.
signals
is
played
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
Sound Mode is not applicable when headphone is used.
Before
Setting
1
Operation
the Clock
Sleep
Timer Function
sleep timer is set, the unit automatically
specified time has elapsed.
Press CLOCK.
When the
(If the clock requires setting, press and hold CLOCK
for more than 2 seconds.)
The hours display begins to blink.
off after the
-
Select either the 12 hour
2. cycle by PRESET (-/+)
on
cycle
or
the 24 hour
the front
panel.
1
To
specify the time delay before the
turns
power is
turned off, press SLEEP.
In the
display window
about 5 seconds. This
off
automatically
you
for
can see
that the system turns
after 90 minutes.
means
Each time the button is
pressed the time interval
by 10 minutes. i.e.
before it turns off is reduced
(12HR)
or
(24HR)
80...70... etc. Select the desired time to turn off.
To check the
3
4
5
6.
7
8
Press SET to confirm the selected hour
cycle.
2 turned off.
remaining
time until the power is
While the
Use PRESET
(-/+)
sleep function is active press SLEEP
briefly. The time remaining until the unit turns off is
displayed for about 5 seconds.
to set the current hour.
Press SET.
ote
If you press SLEEP while the
the SLEEP time is reset.
Use PRESET
(-/+)
sleep time is displayed,
to set current minutes.
To cancel
Press SET and the correct time is shown
on
the
Timer
setting
"
display.
Press CLOCK at any time to show the time
the display, for about 5 seconds.
Sleep
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10 appears, and then press
on
SLEEP
once
again
after "SLEEP 10
"
shows
on
the
display.
15
PREATION
Before
Operation
Timer Function
With the TIMER function you can have the radio receprecording, CD or tape playing turned on and
tion and
off at the time desired.
minutes time
pressing
PRESET
on
minutes
'OFF TIME' indicator appears for about 0.5
display window and then
seconds in the
If you don't set clock, timer function doesn't work.
Press TIMER to enter the timer
2 TUNER-CD-TAPE flash
in the
setting mode.
display window in
For your reference
If you want to correct the
TIMER
previous memorized
press and hold the TIMER button
seconds.
setting,
more
The
on
previous memorized timer setting for
indicators appear in the display.
""
than 2
Time and
Press SET when the desired function flashes.
3
1.
4
a.
When you select TUNER function,
'PLAY' and 'REC' indicator flash in
the
display window alternately for
about 3 seconds.
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
b. Select the
play only
play and recording
previous memorized preset
(-/+) on the front panel
and press SET.
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
2. When you select CD or TAPE function,
'ON TIME' indicator appears for about 0.5
display window and then
6
16
on
hour
pressing
Press SET to confirm the turn
PRESET
on
(-/+).
hour time.
pressing
9 (-/+).
PRESET
Press SET.
11
Set the turn off minutes
12
13
14
Press SET.
pressing
PRESET
(-/+).
Adjust the volume level pressing PRESET
(-/+).
Press SET.
""
appear in the display window and the timer
has been completed.
setting
Turn the system off.
The selected timer functions
15
To cancel
or
on
the timer set
setting
automatically
check the timer
cancel. You
you can select
also check the timer
pressed
can
status.
To activate
button
or
are
and off at the preset times.
Each time the TIMER button is
or
check the timer, press the TIMER
repeatedly
so
that
"
"
appears in the
display
window.
To cancel the TIMER, press the TIMER button
repeatedly
window.
disappears.
Set the turn
.
Set the turn off hour time
switched
number with PRESET
seconds in the
disappears
10
turn.
5
on
(-/+).
Press SET to confirm the turn
For your reference
-
Set the turn
8 time.
Press CLOCK to check the current time.
1
7
so
that
"
"
disappears from the display
Before
Operation
General
This manual
Press 1/2 to
can
operating the
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the Unit or
gives
basic instructions for
numbers
Unit. Some DVDs
is not available
on
On-Screen
General
screen.
playback
On-screen
1
can
displayed
changed on the
be
on
Press 3/4 to select
an
will be
item.
number). For
some
setting.
Repeat Chapter
TRACK
Repeat Track (non-PBC Video CDs only)
the TV
ALL
menu.
setting
functions,
Repeat Title
TITLE
AB
Repeat
All Tracks
Repeat
A-B
(non-PBC Video CDs only)
Repeat Off
OFF
Resume
during playback.
2 The selected item
an
CHAPT
display operation
Press DISPLAY
title
of
Feedback Field Icons
Temporary
Display
status can be
(e.g.,
setting
be also be used for
press SELECT/ENTER to execute the
the disc.
Some items
the
change
3 The number buttons
Explanation
Action
play from this point
prohibited
or
not available
item.
Notes
highlighted.
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
1 /12
Time search
0:20:09
1 ENG
Audio
language
Digital Audio
Output mode
D
and
Subtitle language
Angle
ABC
OFF
1/1
Sound
VCD2.0
5.1 CH
BYPASS
titles, and skips
to the desired title number.
Shows the current
chapters,
and
Shows the
chapter
skips
number and total number of
to the desired
chapter
number.
elapsed playing time, and
point by the elapsed time directly.
searches the
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
and
and
the
number of
setting.
Numbers, SELECT/ENTER
1/2,or
AUDIO
1/2,or
ANGLE
1/2,or
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
Shows the current track
1/4
Time
0:20:09
Audio Channel
and PBC On
Shows the
mode,
and
number, total number of tracks
skip to the desired track number.
elapsed playing
time
(Display only)
Shows the audio channel, and
STER.
Sound
1/2,or
Numbers, SELECT/ENTER
SUBTITLE
angle number and total
changes the angle number.
Shows the current sound mode, and
changes
1/2,or
Numbers, SELECT/ENTER
1/2,or
setting.
Shows the current
angles,
language,
number, and
Selection Method
BYPASS
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
Selection Method
1/2,or
Numbers, SELECT/ENTER
--
1/2,or
AUDIO
1/2,or
SOUND
17
PREATION
Before
Initial
You
can
Operation (Continued)
Language
Settings
set your own Personal Preferences on the Unit.
Disc
Language
Select
Initial
1
Settings
General
Operation
The setup
Subtitle.
original language set for the disc is selected.
language, press number buttons to
corresponding 4-digit number according to the lancode list on page 33. If you enter the wrong language
Original
Press SETUP.
Other
menu
appears.
DVD
for the disc's Menu, Audio, and
language
a
:
:
The
To select another
enter the
guage
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Disc Audio
Original
Spanish
Disc Subtitle
English
Italian
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
code, press CLEAR.
Chinese
Language
Polish
Country
Hungarian
5.1
TV
Speaker Setup
Spanish
Code
Italian
Aspect
Menu
Chinese
Language
Polish
Others
Hungarian
5.1
Press 3/4 to select the desired item.
2 The
screen
Others
will show the current
selected item,
as
well
as
setting for the
alternate setting(s).
Menu
3
Speaker Setup
While the desired item is selected, press 2, then
3/4 to select the desired setting.
Select
you
Language
a
see
for the setup
language
menu.
This is the
menu
when you press SETUP.
Press SELECT/ENTER to confirm your selection.
4 Some items require additional steps.
Disc Audio
Chinese
Disc Subtitle
English
Disc Menu
Rating
Press SETUP, RETURN,
5 setup
or
Country
PLAY to exit the
TV
Menu
menu.
5.1
Code
Aspect
Language
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
a
standard 4:3 TV is
nected.
Displays theatrical images
above and below the picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style is played back
picture are cut off).
16:9 Wide: Select when
a
style (Both sides of the
16:9 wide TV is connected.
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
5.1
Code
Aspect
Menu
Language
Speaker Setup
Others
18
in that
Before
Operation (Continued)
Others
The DRC, Vocal, PBC and Auto
Play settings
can
be
changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
Rating
Auto
Country
TV
On
Play
Off
Code
Vocal
Set Vocal to On
only when
DVD is
The karaoke channels
multi-channel karaoke
on
the disc will
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
Off: Video CDs with PBC
are
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Language
Auto
5.1
a
mix into normal stereo sound.
Aspect
Menu
playing.
Speaker Setup
DVD
set up the unit so a DVD disc automatically
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search a
title that playback time is long most and then play back
the title automatically.
You
Others
Play
can
starts
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible, thanks
to
digital
audio
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may listen to a movie
losing clarity of sound. Set
at a lower volume without
On: Auto Play function is activated.
Off: Auto Play function is not activated.
ote
The Auto
Play function
may not work for
some
DVDs.
DRC to On for this effect.
19
PREATION
Before
Operation (Continued)
Parental Control
Country Code
Rating
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
the disc. These
scenes on
scenes are
Disc Menu
are
Rating
Country
TV
5.1
Disc Subtitle
Disc Menu
6
Country
TV
3
Aspect
Menu
1
4
Code
1
Speaker Setup
Select
Country Code using the
the setup
Change
Others
3/4 buttons
on
menu.
Code is selected, press 2.
Country
2
Follow step
of "Rating"
left.
3
Select the first character using the
buttons.
4
Shift the
button
select the
5 second characterusing
buttons.
using
Press SELECT/ENTER
confirm
country
6 code selection, then
SETUP
exit the
3
Unlock
5.1
Speaker Setup
While
2
Language
Language
Others
5
Rating
Code
Aspect
Menu
8
7
TH
Disc Subtitle
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
Code Set
Disc Audio
The Parental Control feature allows
country-dependent.
country/area whose standards
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 34.).
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
DVD
a
on
3/4
1
Select
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
While
2
When
3 Enter
"Rating"
2
cursor
and
3/4
is selected, press 2.
to
you have not entered
password yet.
a
4-digit password using the numbered butpersonal 4-digit security password.
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security pass-
your
to
press
menu.
a
tons to create a
word, then press SELECT/ENTER.
If you make
a
4
pressing SELECT/ENTER,
4-digit security password again.
rating from 1 to 8 using the 3/4 but(1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Select
a
Ratings
be
played. Higher rated
unless
an
alternative
scenes
scene
lower
If
rating for
rating or
will not be
is available
The alternative must have the
same
on
rating
the
1
Follow
Enter the old code, then press SELECT/ENTER.
Select Change using 3/4 buttons then press
3
play-
played
or a
Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
ote
20
some
DVDs.
1-2 as shown above to the left
(Rating).
SELECT/ENTER.
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter exactly the same code a second time and verify by pressing SELECT/ENTER.
6
Press SETUP to exit the
menu.
If you
forget your 4-digit code
the disc.
no
This function may not work for
Steps
lower will
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
is necessary when
the 4-digit code"
2
1 to 8: Some discs contain scenes not
suitable for children. If you set a
er, all disc scenes with the same
4-digit password
changed (see "Changing
below.).
tons. One
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
5
the code is
Changing the 4-digit code
mistake before
press CLEAR and enter
ote
Confirmation of the
If you
forget
your
password,
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display the setup
menu.
6-digit
number
"210499".
The
3
4-digit password
Enter
a new
code
is cleared.
as
shown above to the left
(Rating).
Before
Operation (Continued)
Size
Speaker Setup
Adjust the following settings for the
built-in 5.1 channel
surround decoder.
Front
Speaker (L/R)
Disc Audio
Center
Disc Subtitle
R
Disc Menu
Country
TV
Code
Sub Woofer
Volume
0dB
Size
Aspect
Menu
R
Front L
Rating
Large
Distance
Language
Speaker
Rear Surround
Speaker (L/R)
1 ft
Since the
the
speaker settings
settings.
are
fixed, you cannot change
Distance
If you connected
Distance lets the
speakers to your unit, setting the
speakers know how far the sound has
to travel to reach your set listening point. This allows
the sound from each speaker to reach the listener at the
same time. (1 ft
30.48 cm)
=
Test
Return
5.1
ote
Speaker Setup
You
Others
1
Select "5.1
Speaker Setup" using the
buttons
the setup
on
While "5.1
2 button.
menu.
Speaker Setup" is selected,
3
Adjust options by using
4
Select
press 2
not set the distance of subwoofer
speaker.
3/4/1/2 buttons.
speaker.
Test
Press SELECT/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of
signals memorized in the system.
Front Left (L)
Centre
Front Right (R)
Rear Left (R)
Rear Right (L)
Subwoofer
→
Press 2 buttons to select the desired
Speaker
3/4
can
→
→
test
→
→
Return
Press SELECT/ENTER to return to the
previous
menu.
selection
speaker that you want to adjust. [(Front speak(Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer)]
a
ers
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Volume
Press 1 / 2 to
speaker. (-6dB
adjust the output level of the selected
+6dB)
~
21
PREATION
Operation
Presetting
with RADIO
the radio stations
Listening
can
down to the minimum level.
ume
Press TUNER/BAND (or TUNER) to show either
FM or AM in the display window.
Every time you press this button, AM and FM
1
2
Press TUNING
on
the volume
-/+
Tuning
To listen to
(-/+) for
more
than 0.5 second.
when the unit tunes in
Scanning stops
a
3
4
Press PRESET
(-/+) (or PRESET D/E
control)
to select the
on the
preset number you
want.
or
Press POWER to turn off the unit
function mode
Press PROGRAM/MEMORY
Repeat steps
or
For your reference
If a FM program is noisy
Press MODE/RIF repeatedly
so
stereo
?
Press and hold PROGRAM/MEMORY
on
are
panel
moment and then a
cleared.
preset number will flash. To change
To recall
the left side.
preset numbers
Press and hold PRESET
(-/+) (
or
PRESET
D/E
on
the
until the desired preset number appears
press the button repeatedly.
remote
or
on
22
control)
to restore the stereo effect.
To
improve reception
Reposition the supplied
antennas.
Use MODE/RIF
(Radio Interference Filter)
reception if stereo reception is distorted by noise.
While recording weak AM broadcasts, if noises
function to switch to Mono
For your reference
If all stations have already been entered, "MEM FULL"
message will appear in the display window for a
the preset number, follow the steps 4-5
again
that "ST"
display window. There will be no
the reception will improve. Press
otes
the front
for about two seconds, "CLEAR ALL" appears in the
display window and then press CLEAR on the front
panel, the stations
in the
effect, but
MODE/RIF
To clear all memorized stations
to select another
AUX).
?
again.
2 to 5 to store other stations.
or
(TAPE, DVD/CD
disappears
5 The station is stored.
non-preset radio stations
tuning, see "Manual Tuning".
automatic tuning, see "Automatic Tuning".
To turn the radio off
(-/+) briefly and repeatedly.
Press PROGRAM/MEMORY on the front panel.
A preset number will flash in the display window.
6
(or
control)
For manual
?
?F
station.
Tuning
Press the TUNING
remote
remote
on
repeatedly.
Press the TUNING
-
VOLUME knob
by rotating
3 Adjust
the
pressing VOLUME
otes
Automatic
Manual
remote
the next preset station.
panel until the
change.
the front
starts to
(-/+) (or PRESET D/E on the
control) repeatedly to select the preset
Press PRESET
station you want.
Each time you press this button, the unit tunes in
changes alternately.
(-/+)
2 frequency indication
to the radio
Press TUNER/BAND (or TUNER) to select either
AM or FM in the display window.
The last received station is tuned in.
1
preset 30 stations for FM and AM.
Before tuning, make sure that you have turned the vol-
You
occurs, press MODE/RIF once.
Operation
with RADIO
RDS Function
Programme Search (PTY)
OPTIONAL
-
This unit is
Amajor benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
which
shows the abbreviations used to indicate each PTY
About RDS
equipped with RDS (Radio Data System),
brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
along
with
an
explanation of the
PTY.
OPERATION
cal selection and the correct time.
RDS Tuning
When
FM station
containg RDS data is tuned in, the
automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS services programme (PS) if transmitted by the station.
a
unit will
RDS Display
Options
The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
broadcast network
front
or
panel enables
call letters.
you to
Pressing RDS on the
cycle through the various
data types in the sequence:
PTY
RT
FREQUENCY
CT)
(Programme type recognition)- The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
name is displayed on the display window.
CT (Time controlled by the channel)- Enable the
(PS
PTY
unit to receive the actual time and show it
on
the dis-
play window.
PS (Programme Service name)- The programme
title is displayed on the display window.
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
being transmitted, the
Display Window will show a PTY NONE, RT NONE,
CT NONE, PS NONE message.
You may search for a specific
by following these steps:
1
Press TUNER/BAND
mode.
Select
a
Programme Type (PTY)
(or TUNER)
desired station
2 TUNING (-/+).
to select FM
by pressing
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3
Press the RDS to select PTY mode.
To search for
different
the PRESET
4 (-/+) while the last PTY inPTY, press
is still displayed
a
use
scroll
through
to
the list of available PTY types.
When the PTY is
selected, press
5 (-/+) within 5 seconds.
the TUNING
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength that matches the desired PTY type.
23
with TAPE
Operation
Basic
To
Playback
Press TAPE to select tape function.
("NO TAPE appears in the display
1
"
cassette deck
by pushing
2 Open
PUSH EJECT position.
Insert
a
3 bottom
cassette with the
4
window.)
STOP
optional)
Press COUNTER RESET
the front
panel
Playing
or
To
unit
stops automatically.
You
can
pressing
:
Play
Rewind
FF/GG
on
"
in
display window.
Fast Forward
or
/
on the front panel or
during playback or
:optional) at the tape position
the remote control
stop press G
you want.
OPTIONAL
select direction of the cassette you want
PLAY MODE.
(or F
by
Function
Display
Pressing
time appears "TAPE 0000
After press
plays front side of cassette, the
AUTO REVERSE DECK
(COUNTER) during play-
back.
AUTO STOP DECK
After auto stop deck
STOP( )/CLEAR on the front panel or TAPE
) on the remote control during playback.
Tape Counter Reset
tape side to the
on
(
to the
and then close deck.
Press G (or F :
remote control.
Stop Play
Press
Once
After the cassette
plays front or
(backward play) side,
stops automatically.
Twice
After the cassette
reverse
reverse
Three
times
plays front and
side, stops automatically.
After the cassette of
plays six times
repeatedly front and
stops automatically.
reverse
side,
Recording
Basic
1
CD to
Setting
Press the function
TUNER)
or
Open the
2
AUX]
sette into the cassette
To set the
synchro recording function dubs
and programmed titles automatically into
you want.
cassette deck and insert
a
blank
cas-
compartment.
recording direction :
repeatedly to
Press PLAY MODE
OPTIONAL
set the
recording
direction.
Recording
from Radio, CD
Press z/[]
on
the front
2 The recording is begun.
or
panel
To pause the recording
Press z/[] during recording
To
stop the recording
Press
24
1
a
complete CD
a
cassette.
Press CD SYNC. in stop mode.
"REC" flashes and
displays in the display window.
"
The
recording
2 callysynchronized
after about
seconds.
"
is started automati-
7
Auxiliary
source
Press z/[] on the front panel or on the remote
control.
"REC" flashes and holds the cassette in pause
mode.
1
Tape Synchronized Recording
The CD
[CD, TUNER/BAND (or
STOP(x).
.
or
remote control.
otes
If you wish to record from the desired track, select
the desired track with
/
commencing CD synchro recording.
A function change is not possible during
recording.
before
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
DVD
VCD2.0
General Features
VCD1.1
the TV and select the video
input
ote
Unless stated otherwise, all operations described
the remote control. Some features may also be
source
connected to the unit.
available
Audio system: Turn on the audio system and select
input source connected to the unit.
on
the
Setup
use
menu.
the
1
Moving
Press OPEN/CLOSE to open the disc tray.
2
Load your chosen disc in the tray, with the
playback side facing down.
3
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If
The
a menu screen
is
DVD
or
When
Use the 1 /2/3/4 buttons to select the
When
loading
a
MENU to return to the
you
to the
setting
the
and the exact
1 /12
title
than
as
1/3
disc has
on a
more
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
beginning
of the current
briefly
number
using
chapter/track.
step back to the previous
to
the numbered buttons
1 /2 to select the
chapter/track, then
(0-9)
or
press
press
SELECT/ENTER.
for
menu
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental Control",
DVDs may have a
player
ote
For
two-digit numbers, press
(0-9)in rapid succession.
Search
Notes
If Parental Control is set and the disc is not within the
Your
num-
any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
menu screen.
You also may set PBC to Off under setup. See page
19.
--
to
To go
may differ depending on the disc.
Follow the instructions on the each menu screen.
--
can move
chapter/track.
directly to
menu screen.
operating procedures
title, you
to another CHAPTER/TRACK
Press . twice
Use the number buttons to select the track you want
using
one
Press PREV./NEXT . or > briefly during
playback to select the next chapter/track or to return
to view.
Menu
a
disc has
VCD2.0
Press RETURN to return to the
than
follows:
as
chapter/track
title/chapter
more
VCD1.1
DVD
back.
or
disc has
Moving
view, then press SELECT/ENTER to start play-
Press TITLE
DVD
Press DISPLAY, then press the appropriate
bered button (0-9) to select a title number.
DVD
want to
a
another title
displayed
may be displayed first after
Video CD which offer a menu.
menu screen
to another TITLE
1/3
will not
different from your
player is 3 (three).
(see
page 20).
region code.
on
DVD
VCD2.0
the numbered buttons
VCD1.1
1 Press and hold PREV./NEXT . or > for about
two seconds
during playback.
now go into SEARCH mode.
2 Press and hold PREV./NEXT . or >
The
player
will
repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
To return to normal play, press PLAY.
to select the
play discs that have a region code
player. The region code for this
3
25
OPERATION
Operation
with DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
1
player
will
Repeat
A-B
A*
AB
Frame-by-frame playback
VCD1.1
To repeat
Press PAUSE/STEP
The
(continued)
now
during playback.
go into PAUSE mode.
"
A
"
appears
con-
play,
press PLAY.
VCD2.0
DVD
Press SLOW m
VCD1.1
1 Press DISPLAY
is not
Repeat
CHAPT
VCD2.0
DVD
TITLE
TRACK
-
the TV
Playback
The
Title icon appears
Repeat mode,
Repeat Off
on
the TV
on
the TV
1 To
-
a
screen.
repeat the disc currently playing,
press REPEAT
The
All icon appears
Repeat
Repeat Off
on
the TV
screen.
mode, press REPEAT
icon appears
on
the TV
current
point.
Memory
VCD1.1
user
settings
for the last disc
If you load
a
disc that has its
settings
memo-
otes
a
second time.
Repeat
the disc. If you enter
on
time, playback will continue from the
rized, the latest stop position is automatically recalled.
Repeat Track/All/Off
--
The
starts from the selected time
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
repeat the track currently playing, press REPEAT.
Repeat Track icon appears on the TV screen.
3 To exit
display.
in the box.
This unit memorizes the
third time.
The
2 To
on-screen
seconds, press SELECT/ENTER to confirm
CD
DVD
player.
Video CDs
right
Last Condition
screen.
press REPEAT
icon appears
on-screen
a
second time.
Repeat
invalid
an
screen.
repeat the title currently playing, press REPEAT
3 To exit
The
at
the start time.
REPEAT.
The
during playback.
playing
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Repeat Chapter/Title/Off
on
-:--:--
seconds, press 3/4 to select the Time
onds from left to
OFF
icon appears
0:20:09
DVD
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
repeat the currently playing chapter, press
Repeat Chapter
repeat
current disc.
4 Within 10
DVD Video Discs
point.
the TV screen, and the
appears on the screen.
The Time Search box shows the elapsed playing time of the
VCD1.1
ALL
screen.
The "-:--:--" appears in the Time Search box.
applicable for
Video CD.
2 To
on
Search icon in the
reverse
starting point.
the TV
display
ote
in
on
at your chosen end
briefly
begins.
2 Within 10
playback
title:
The Time Search function allows you to start
any chosen time on the disc.
3 To return to normal PLAY, press PLAY.
The
again
Time Search
or
speed: t 1/16, t 1/8, t 1/4 or t 1/2 [(backward)
-DVDonly]orT1/16,T1/8,T1/4orT1/2(forward).
Slow motion
a
3 To cancel the sequence, press A-B.
M during playback.
The player will enter SLOW mode.
2 Use the SLOW m or M to select the required
1 To
briefly
"A B" appears
sequence
Slow Motion
1
*
2 Press A-B
trol.
3 To return to normal
sequence in
a
VCD1.1
OFF
1 Press A-B at your chosen
2 You can advance the
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
VCD2.0
DVD
a
third time.
--
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the unit before commencing to play
3D Surround
VCD2.0
DVD
it.
VCD1.1
screen.
3D SUR
BYPASS
ote
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 19.
This unit
can
produce
a
3D Surround effect, which
playback from two
simulates multi-channel audio
conventional stereo
more
speakers, instead of the five
speakers normally required to listen to
multi-channel audio from
a
home theater system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
again
26
or
to select "BYPASS".
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
Press ZOOM
during playback
or
still
playback
repeatedly,
steps.
the
to acti-
2 Use the 1 /2/3/4 buttons to move
zoomed
the
through
picture.
3 Press CLEAR to
the
level
magnification
normal
resume
playback
or
the contents of DVD Video
Checking
discs: Menus
vate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1 /2/3/4 buttons to highlight your selection,
then press SELECT/ENTER.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The
zoom
function may not work for
some
VCD2.0
DVD
and subtitle
point. Up
to
2
Repeat step
the TV
1
a
1 to enter up to nine Marker
disc
During
playback,
points
on a
will appear
on
2 Within 10
seconds, press 1/2 to select
number that you want to recall.
a
the
screen.
Marker
3 Press SELECT/ENTER.
Playback
will start from the Marked
SEARCH.
1
a
During
playback,
The MARKER SEARCH
2
DVD
scenes
again.
1/1
recorded at different
camera
Changing
angle
the Audio
appears
on
Language
the
display.
DVD
Press AUDIO repeatedly during playback to hear
ferent audio language or audio track.
Press AUDIO
the Audio Channel
VCD2.0
a
dif-
VCD1.1
to hear a dif-
repeatedly during playback
(STER., LEFT or RIGHT).
Subtitles
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
DVD
ABC
1 ENG
Press SUBTITLE repeatedly
different subtitle languages.
during playback
to see the
to erase.
3
a
ferent audio channel
Marked Scene
disc
Angle
Changing
scene.
4 To remove the MARKER SEARCH menu, press
To clear
again.
DVD
The number of the current
press SEARCH.
menu
the
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
Marked Scene
The MARKER SEARCH
on
1 Press MENU.
The disc menu is displayed.
If the disc contains
briefly.
screen
disc.
To Recall
the title menu, press TITLE
remove
Camera
memorize.
on
menu will appear
may appear.
2 To remove the disc menu, press MENU
During disc playback, press MARKER when
playback reaches the spot that you want to
The Marker icon will appear
menu
angles, spoken language
options, and chapters for the title.
Disc Menu
You can start playback from a memorized
nine points can be memorized.
To enter a mark, follow these steps.
1
menu, the
VCD1.1
MARKER SEARCH
1/9
a
the disc
Otherwise,
2 The menu can list camera
DVDs.
3 To
Marker Search
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1
DVD Features
Special
(continued)
Press CLEAR.
The Marker number will be erased from the list.
ote
If
appears, the feature is not available
on
the disc.
2 and 3 to erase additional Marker
4
Repeat steps
5
To remove the MARKER SEARCH menu, press
SEARCH.
numbers.
27
OPERATION
Operation
with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The unit
Notes
WMA
MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
files that have the ".mp3" file extension "MP3 files".
The player can not read an MP3 file that has a file
extension other than ".mp3".
can
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
on
MPEG1 audio
About WMA
the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen.
a Microsoft audio compression
technology.
WMA (Windows Media Audio) offers double the
compression of the MP3 format.
JPEG
Press 3/4 to select the MP3/WMA then press
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
1.
2.
3.
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
Sampling Frequency / only at 44.1 kHz (MP3),
22.05-44.1 kHz (WMA)
Bit rate / within 32-320 kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "EasyCD Creator", which creates an ISO9660 file system.
A single session disc requires MP3/WMA files in the
first track. If there is
3
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
4
Press 3/4 to select
SELECT/ENTER.
track then press PLAY
or
6.
File
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
to the next page.
Press MENU to move to the previous page.
MP3/WMA file in the 1st
or use a new one.
names
and must
Playback starts.
During playback,
no
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc
a
audio
MP3/WMA Disc compatibility with this player is
limited as follows:
2 SELECT/ENTER.
MP3 WMA
(Window Media Audio)
An WMA file is
MP3 WMA
Press TITLE to
Recordings
An MP3 file is audio data
play MP3/WMA formatted recordings on
CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
1
on
About MP3
or
using
8 letters
or
less
".wma" extension
or
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
move
This unit
requires discs/recordings
to meet certain
technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK 1.mp3
TRACK02
TRACK 2.mp3
TRACK03
TRACK 3.mp3
TRACK04
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK 7.mp3
TRACK07
Clear All
TRACK08
0: 56: 18
STER.
Audio CD
BYPASS
menu
Clear All
TRACK 8.mp3
00:00
1
are
in
a
MP3/WMA
menu
file list and want to return to the Folder list,
the 3/4 to highlight
and press SELECT/ENTER to
return to the previous menu screen.
use
5
To stop
28
playback
at any other
these standards. There
many different types of
are
(including CD-R containing MP3
or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback.
OFF
Tip
If you
are
recordable disc formats
TRACK 4.mp3
TRACK05
optimal playback
automatically set to
quality. Pre-recorded DVDs
time, press STOP.
Customers should also note that
required
permission is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always be sought from the copyright
owner.
right
Operation
CD
Pause
1
2
with Audio and MP3/WMA Disc
MP3
WMA
Repeat
Press PAUSE/STEP
during playback.
To return to playback, press PLAY or press
PAUSE/STEP again.
To repeat
1
Moving
CD
to another Track
WMA
or
>
Press PREV./NEXT . twice
the previous track.
briefly during
or
to return to the
briefly
step back to
to
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
CD
MP3
CD
sequence.
Repeat
2 Press A-B
The
Press PREV./NEXT .
playback to go to the next track
beginning of the current track.
A-B
a
During disc playback,
ing point.
The
MP3
(Continued)
Repeat
icon and "A
again
press A-B at your chosen start*
"
appears
icon and "A B" appears
and the sequence
on
the
at your chosen end
begins
to
on
menu screen.
point.
the
menu
3 To exit the sequence and return to normal
A-B again.
The
Repeat
icon and "OFF" appears
Changing
screen,
play repeatedly.
on
the
the Audio Channel
play,
press
menu screen.
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
WMA
repeat the track currently playing, press REPEAT.
The Repeat icon and "TRACK" appears on the menu
1 To
screen.
2 To
repeat all tracks
second time.
The
Repeat
3 To cancel
The
1
disc, press REPEAT
icon and "ALL" appears
Repeat mode,
Repeat
Search
on a
MP3
on
player
will
now
the
a
third time.
menu screen.
WMA
Press and hold PREV./NEXT .
two seconds during playback.
The
menu screen.
press REPEAT
icon and "OFF" appears
CD
the
on
a
or
> for about
go into SEARCH mode.
2 Press and hold PREV./NEXT . or >
repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search speed and direction
are
indicated
on
the
menu
screen.
3 To return to
playback,
press PLAY.
29
OPERATION
Operation
Viewing
This unit
a
with JPEG Disc
JPEG disc
Moving
JPEG
play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the
notes on JPEG Recordings on right.
1
to another File
Press PREV./NEXT .
can
Insert
disc and close the tray.
The MP3/WMA-JPEG choice menu appears
TV screen.
on
the
>
during viewing a
previous file.
once
Still Picture
1 Press PAUSE/STEP
a
or
to advance to the next file or to the
picture
The
will
during
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
player
now
MP3 WMA
To
JPEG
flip the picture
Press 3/4
Press 3/4 to select the JPEG then press
2 SELECT/ENTER.
The JPEG
menu
appears
on
the TV
screen.
during showing a picture
picture horizontally or a vertically.
To rotate
picture
Press 1/2 during
picture clockwise
JPEG
Folder1
Folder2
flip the
to
showing
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Press 3/4 to select
and SELECT/ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice menu.
a
move
If you
list,
mega
"
in
a
file list and want to return to the Folder
the 3/4 buttons
on
the remote to
highlight
and press SELECT/ENTER to return to the
previous
pixels and
burn another disc.
Total number of files and folders
are
use
after several minutes, some of the files are too big
reduce the resolution of the JPEG files to less than 2
---
to the MP3/WMA-JPEG
Tip
"
upon the size and number of the JPEG
files, it could take a long time for the unit to read the
disc's contents. If you don't see an on-screen display
Depending
Off
Speed
on
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
menu screen.
If you want to view a particular file, press 3/4 to
a file and press SELECT/ENTER or
PLAY.
that all the selected files have the
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
rename
4 highlight
Press TITLE to
move
Press MENU to
JPEG
move
to move to
to the next page.
to the previous page.
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
There
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
Speed then
press 3/4 to select the
option
you want to
use, and press SELECT/ENTER.
To stop
5 The JPEGviewing
menu
30
at any other
appears.
copying
time, press STOP.
into the CD
If the files have
them
".jpg"
extensions
layout.
".jpe" or ".jpeg" extensions, please
".jpg" files.
as
without ".jpg" extension will not be able to
by this unit. Even though the files are shown
JPEG image files in windows explorer.
File
as
Folder1
1024X768
when
names
be read
Picture1.jpg
Picture2.jpg
Picture3.jpg
5/32
the disc should
be less than 650.
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
MP3
WMA
with Video CD
Programmed Playback
and MP3/WMA Disc
The
Program function enables you to store your favorite
tracks from any disc in the player memory.
Program can contain 30 tracks.
during playback or in
the Program Edit mode.
Press PROGRAM
1
mode to enter
the stop
mark will appear to the right of the word
the right side of the menu screen.
on
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 19.
Insert Video CD and close the tray.
1
Program
VCD
E
The
ote
On
E
TRACK 1
Program
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
ote
mark will
E
the
Select
a
disappear.
track, then press SELECT/ENTER
2 to
step
3 Repeat
Program list.
place
Program
CD
Edit mode;
Program
2 place the selected track
on
the
Program
additional tracks
2
to
the
TRACK 1.mp3
TRACK 2.mp3
TRACK03
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
0: 56: 18
STER.
Audio CD
00:00
To
PROGRAM to exit the
2-6 of
track you selected last is
highlighted
on
with
left.
on
normal
playback from programmed
The
Repeat
currently playing,
icon and "TRACK" appears
press REPEAT.
on
the
menu
screen.
Press 3/4 to select the track you want to start
5 playing.
To repeat all tracks on the program list, press
REPEAT a second time.
The
move
Press MENU to
"Programmed Playback
Repeat Programmed Tracks
menu
the program list.
Press TITLE to
menu.
press PROGRAM.
To repeat the track
programmed
Program
"PROG." indicator disappears in the display window.
Press 2.
The
resume
4 playback,
OFF
3
MP3/WMA
menu
or
and MP3/WMA disc"
Clear All
TRACK 8.mp3
BYPASS
playback is stopped.
will appear.
ote
Press RETURN
Follow
TRACK 5.mp3
TRACK06
menu
TRACK 3.mp3
TRACK 4.mp3
TRACK05
Program
steps
3 Audio CD
E
TRACK 8.mp3
TRACK02
TRACK04
Press PROGRAM while
The VCD
list.
on
Program
MP3 WMA
TRACK01
4
Clear All
TRACK 8
Press PROGRAM to exit the
move
to the next page.
to the previous page.
Repeat
To cancel
The
Repeat
icon and "ALL" appears
Repeat mode,
on
the
menu screen.
press REPEAT
icon and "OFF" appears
on
the
a
third time.
menu screen.
Press PLAY to start.
6 Playback begins
in the order in which you
programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
have
7
To
played
resume
once.
a
a
playback from programmed
track of CD (or MP3/WMA) list
and then press SELECT/ENTER.
"PROG." indicator disappears on the menu
screen.
Track from
MP3/WMA disc
Program
normal
playback, select
Erasing
Program List
1 Press PROGRAM
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to move to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Program
list.
Erasing the Complete Program List
1 Follow
List"
steps 1-2 of "Erasing
as
a
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
31
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
a
problem before contacting service.
Cause
Symptom
No power.
?
The power is on, but the
unit does not work.
No
of
picture.
?
?
Correction
The power cord is disconnected.
?P
lug the power
securely.
No disc is inserted.
?I nsert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
The TV is not set to receive DVD
signal
out-
put.
?S elect the appropriate video input mode on
the TV so the picture from the unit appears
on
?
The video cable is not connected
securely.
cord into the wall outlet
?
the TV
screen.
Connect the video cable into the
jacks
securely.
?
There is no sound or only
a very low-level sound is
heard.
The connected TV power is turned off.
?T he equipment connected with the audio
cable is not set to receive DVD signal output.
?
The audio cables
not connected
are
securely
?T
?
?
The power of the equipment connected with
the audio cable is turned off.
?T he audio
The
playback picture
is poor.
The unit does not start
?
?
connecting
The disc is
cord is
damaged.
?
?
?
Connect the audio cable into the
so
jacks
?T urn on the equipment connected with the
audio cable.
?R
eplace
it with
new one.
?C lean the disc.
dirty.
No disc is inserted.
?I nsert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
An
?I nsert a playable disc. (Check the disc
color system and Regional code.)
playback.
?
the TV.
securely.
.
?
urn on
Select the correct input mode of the audio
you can listen to the sound from the unit.
unplayable
The disc is
placed upside
The disc is not
The disc is
?Amenu
disc is inserted.
placed
?P lace the disc with the
down.
within the
guide.
on
side down.
tray correctly
?C lean the disc.
dirty.
is
playback
?P lace the disc on the disc
inside the guide.
type,
the TV
?
screen.
Press the SET-UP button to turn off the
menu
screen.
?
Severe hum
or
noise is
?
The
The
Rating
plugs
?
level is set.
ing
and
jacks
are
?
?
Radio stations cannot be
tuned in.
?
The disc is
components
?
are
positioned
or
connected
poorly.
?
?
a
cloth
or
change
slightly
the rat-
moistened
Connect the
speakers
and
components
securely.
The unit is located with too close to the TV.
The antenna is
function
Rating
?C lean the disc.
dirty.
The speakers and
connected poorly.
level.
?W ipe them with
with alcohol.
dirty.
heard.
?
Cancel the
?M ove your TV away from the audio components.
?
?
The signal strength of the stations is too
weak (when tuning in with automatic tuning).
No stations have been preset or preset stations have been cleared (when tuning by
Connect the antenna
?T
?
securely.
the antennas and connect
antenna if necessary.
Adjust
une
in the station
an
external
manually.
Preset the stations.
scanning preset stations).
The remote control does
not work properly.
?
?
The remote control is not pointed at the
remote sensor of the unit.
?
The remote control is too far from the unit.
?
There is an obstacle in the path of the
remote control and the unit.
?
The batteries in the remote control
?
Point the remote control at the remote
of the unit.
Operate
the remote control within about 23 ft
(7 m).
?
?
exhausted.
32
are
Remove the obstacle.
Replace
sensor
the batteries with
new ones.
Language
Code List
Enter the appropriate code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu"
(See page 18).
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volap k
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
33
Code List
Country
Enter the
appropriate code number for the initial setting "Country Code" (See page 20).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
LI
Liechtenstein
SD
Sudan
AF
ET
LK
Sri Lanka
SE
Sweden
FI
Finland
LR
Liberia
SG
Singapore
AI
Afghanistan
Antigua and
Anguilla
Spain
Ethiopia
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
GF
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
Georgia
French Guyana
GH
Ghana
MM
El Salvador
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
SY
Syria
BD
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Bangladesh
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Tunisia
BS
Bahamas
GY
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
MZ
Malaysia
Mozambique
TN
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nigeria
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
CH
Switzerland
IL
Israel
NR
Nauru
UM
Uganda
United Kingdom
USA Minor Outlying
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Territory
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Polynesia (French)
Papua New Guinea
Philippines
VC
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Japan
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis Anguilla
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
AG
CF
DE
Barbuda
Verde
Georgia
& S. Sandwich
(USA)
Republic
French Southern
(French)
UK
Miquelon
City
Islands
Islands
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
(French)
State
Grenadines
Algeria
34
Tobago
Islands
DZ
Islands
Principe
Territories
DO
Republic
Mayen
Islands
(British)
(USA)
Specifications
Power
[Genral]
Power
FM
AM
[Amplifer]
TAPE
6.43kg
External dimensions
[Video]
(MW)
(W
x
H
x
D)
161
255
x
x
268
mm
Laser
Semiconductor laser,
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
Harmonic distortion (audio)
40
Video output
1.0 V
S-video output
(Y)
(C)
wavelength
650
nm
18000 Hz
-
More than 70 dB
More than 70 dB
More than 70 dB
0.2 %
(1 kHz)
(p-p), 75 Ω, negative
1.0 V
(p-p),
(p-p),
0.3 V
sync., RCA
jack
75 Ω,
75 Ω
108.0 MHz
65 -74 MHz, 87.5 -108.0 MHz
87.5
Frequency Response
100
Output Power
Front:20W+20W(6Ω/2chTHD10%)
Center: 20W (6 Ω 1ch THD 10%)
Rear:20W+20W(6Ω2chTHD10%)
T.H.D
0.15%
Frequency Response
Signal-to-noise ratio
Tape Speed
42
Wow Flutter
0.25%
F.F/REW. Time
120sec
Frequency Response
Signal to Noise Ratio
Channel Separation
250
-
or
10.7 MHz
60/55 dB
60
-
10000 Hz
522-1611kHzor530-1610kHzor530-1720kHz
450 kHz
35 dB
-
1800 Hz
-
25000 Hz
80 dB
3kHz±3%
(MTT -111, JIS-WTD)
(C-60)
8000Hz
-
43dB(P/B)/43dB(R/B)
50dB(P/B)/45dB(R/P)
55dB
(MTT-5511)
Speaker (LXS-D5230V)
2 Way 2 Speaker
Speaker Model
Type
Impedance
Frequency Response
Front
-
1
Speaker(LXS-D5230C)
Way 1 Speaker
D)
160
x
248
2.35
x
-
1
Speaker (LXS-D5230T)
Way 1 Speaker
6Ω
20000 Hz
(1m)
20W
40W
x
150
84 dB/W
(1m)
20W
H
Rear
6Ω
20000 Hz
86 dB/W
Rated
x
Center
6Ω
70
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
REF NC
(1 kHz)
(1 kHz)
Tuning Range
Intermediate Frequency
Signal to Noise Ratio (Mono/Stereo)
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Erase Ratio
[Speakrs]
panel.
110W
Mass
[CD/V ]
[Tuner]
Refer to the back
supply
consumption
40W
177
kg
mm
108X150X110mm
0.68kg
150
-
20000 Hz
84 dB/W
(1m)
20W
40W
108x91x110mm
0.58
kg
35
P/NO
:
3828R-A100A
Download PDF