LG | LX-V340A | LG LX-V340A Owner’s Manual

DEILAMI_LX-V340 (ENG)-42X
VCD Micro Hi-Fi
System
Owner's Manual
MODEL
:
KR-320MV
VIDEO CD
Please read this manual
carefully
Retain it for future reference.
before
operating
your set.
PAGE 2
INTRODUCTION
Precautions
CAUTION
Use of controls
procedures
RISK OF ELECTRIC
adjustments or performance of
specified herein may
result in hazardous radiation exposure.
SHOCK DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER
or
other than those
(OR BACK)
Laser component in this product is capable of emitradiation exceeding the limit for Class 1.
ting
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
NEL.
EXPOSURE TO BEAM.
LASERSTRALNING NAR
AR OPPNAD STRALEN AR FARLIG.
VARNING:OSYNLIG
Graphical Symbols Explanation:
The
DENNA DEL
lightning flash with arrowhead symbol,
an equilateral triangle is intended to
within
alert the
user
to the presence of uninsulated
dangerous voltage
within the
product's
triangle
point
within
an
is intended to alert the
s'exposer
l'appareil est ouvert, ne pas
radiations invisibles du faisceau laser.
This label is located
equilateral
user
aux
enclo-
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
sure
The exclamation
Attention:Quand
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
on
the interior.
CLASS 1
LASER
KLASSE 1
LASER
PRODUCT
PRODUKT
LUOKAN 1
LASER
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
WARNING
This
TO REDUCE THE RISK OF FIRE OF ELECTRIC
LASER
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
The CLASS 1 LASER PRODUCT label is located
RAIN OR MOISTURE.
the exterior.
To avoid electrical shock, do not open the cabinet,
Refer servicing to qualified personnel only.
The
apparatus shall
splashing
such
as
and that
not be
exposed to dripping or
objects filled with liquids,
be placed on the apparatus.
no
vases, shall
Compact Disc player is classified
product.
as a
CLASS 1
on
PAGE 3
INTRODUCTION
Ta ble of Contents
INTRODUCTION
CD/VCD OPERATION
Precautions.............................2
BasicPlayback..........................15
TableofContents.........................3
BasicPlaybackSetup....................15
.4
ToPausePlay..........................15
SafetyPrecautions..........................4
ToStopPlay...........................15
NotesonDiscs.............................4
ToSkipaTrackorscene..................15
Notes(Discs,RemoteControl,Tape).
.
.
.
.
.
.
.
.
NotesonRemoteControl....................4
ToSearchatrackorscene................15
NotesonTapes............................4
AdvancedPlayback....................16-19
the
4
LastSceneMemory.....................16
IdentificationofControls..................5-7
TimeSearchFunction...................16
FrontPanel................................5
DisplayFunction........................16
RemoteControl............................6
MultiplexFunction......................16
Adjusting
voltage (OPTIONAL)
.
.
.
.
.
.
.
.
RearPanel/DisplayWindow..................7
PBCPlay(PlaybackControlPlay).
.
.
.
.
.
.
.
.
.
.16
DigestPlayback........................17
CONNECTION
BasicSetting.........................17
AntennaConnections......................8
IntroScanPlayback....................17
SpeakerSystemConnection................9
DiscDigestPlayback...................17
ConnectingtoaTV/Monitor.................9
DiscTrackPlayback....................17
RepeatPlayback.......................18
BEFORE OPERATION
ProgramPlaySetup.....................18
SettingtheClock........................10
MP3Playback.........................19
SleepTimerFunction.....................10
TimerFunctions.........................11
AudioAdjustment........................12
ADVANCED OPERATION
KARAOKE.............................20
VolumeAdjustment......................12
KaraokeFunction.......................20
SoundQualityAdjustment.................12
ToAdjustECHOVolume..................20
MUTE................................12
ToChangetheKey(KEYCONTROL).
XDSS
RecordingwithKaraoke..................20
(Extreme Dynamic
Sound
System)
.
.
.
.
.
12
.
.
.
.
.
.
.20
SURROUND............................12
OAO
(Orientation
Acoustic
ON/OFF
Optimizer)
Auxiliary (External Equipment) Input
.
.
.
.
.
.
.
.
.
.
.
.
12
12
REFERENCE
SystemSelection(NTSC/PAL).
.
.
.
.
.
.
.
.
.
.
.
.
.21
DiscsRequirements......................21
RADIO OPERATION
Troubleshooting.........................22
PresettingRadioStations..................13
ListeningtotheRadio....................13
CASSETTE DECK OPERATION
TapeOperation.........................14
BasicPlayback.........................14
ToStopPlay...........................14
TapeCounterReset.....................14
ToPlayRewindorFastForward.
.
.
.
.
.
.
.
.
.
.
.14
RecordingSetup........................14
BasicSetting..........................14
Recording
from Radio, CD
or
Source
Auxiliary
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.
.
14
.14
Specifications...........................23
PAGE 4
INTRODUCTION
Notes (Discs, Remote Control, Tape)
Safety Precautions
Handling
When
Notes
the unit
shipping
Remote control
?D istance:
remote
?
keep the surface clean
use
volatile
liquids,
such
as
the unit. Do not leave rubber
near
contact with the unit for
They
will leave marks
Cleaning
on
insecticide spray,
plastic products
or
long period
a
:
remote
sensor.
.
in
Remote control
use
thinner,
these
as
might damage
batteries with
and
aligned correctly.
alcohol,
Caution
Handling
Do not mix old and
by
playback side of the disc.
edges so that fingerprints
the
Notes
will not
the surface.
Do not stick paper
or
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
discs
Hold the disc
on
cover on
rear
the surface
Discs
on
Do not touch the
get
battery
of the remote control,
and insert two R03 (size AAA)
extremely dirty,
mild detergent
strong solvents, such
as
the
AAA AAA
a
battery
installation
of the unit.
Notes
About 30° in each direction of the front of the
Angle
Detach the
are
and press
.About23ft(7m)fromthefrontofthe
of time.
moistened with
lightly
solution. Do not
or
.
the unit
soft cloth
benzine,
.
the surface.
soft, dry cloth. If the surfaces
a
use a
sensor
sensor.
To clean the cabinet
Use
range
the buttons.
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Do not
operating
Point the remote control at the remote
the unit
The
To
Remote Control
on
tape
on
the disc.
on
Tapes
Preventing overwriting
a
recording
Side A
Tab for side A
Tab for side B
Storing
After
discs
playing,
store the disc in its
case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
as there may be
increase inside the car.
sunlight,
Cleaning
a
Removing the safety tab(s) of the cassette (with
screwdriver) will prevent accidental erasure.
a
small
considerable temperature
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Adhesive tape.
To record
again,
cover
the hole of the tab with adhesive
tape.
Adjusting
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for analog records.
use
the
voltage (OPTIONAL)
If your unit is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before
connecting
the AC power cord.
PAGE 5
INTRODUCTION
Identification of Controls
(Cont'd)
Front Panel
14
12
13
3
12
1.
CD DOOR
2.
DISPLAY
3.
POWER
4.
OAO
5.
4
11
567
10
9
8
9.
( STANDBY/ON)
(Orientation
Acoustic
button
Optimizer)
button
HEADPHONE SOCKET
7.
?
SET/CD
?
COUNT. RESET button
?
)
REC/PAUSE
PHONES)
12
3.5mm
-
button
(
?
CD
/
buttons
)
TAPE REWIND/FAST FORWARD
(
/
buttons
?
PLAY
?
REVERSE PLAY
?
STOP
(
(
button
)
(
)/CLEAR
PBC button
?
CLOCK button
)
button
button
-
TAPE
3.5mm
:
OPTIONAL
KNOB(MIC VOL.)
:
:
OPTIONAL
)
TIMER button
?
CD SYNC. button
?
MODE/RIF button
button
(-/+) buttons
(-/+) buttons
PREV./NEXT(
PRESET
?
?
)
-
11. VOLUME CONTROL KNOB
TUNING
?
?
(
(
(MIC)
position
OPTIONAL
FUNCTION SELECT button
6.
MIC JACK
10. MIC VOLUME CONTROL
(TUNER/BAND, VCD/MP3/CD, TAPE, AUX)
?
PUSH EJECT
8.
?
PLAY MODE button
13
?
REMOTE SENSOR
14.
?
CD OPEN/CLOSE
(
:
OPTIONAL
OPEN/CLOSE)
button
PAGE 6
INTRODUCTION
Identification of Controls
(Cont'd)
You will find instructions for each of the remote control functions in the
sections of this instruc-
appropriate
tion manual.
Remote Control
1.
POWER button
2.
Function select buttons
3.
Numeric buttons
(CD/VCD, BAND, AUX, TAPE)
1
15
4.
2
3
?
BACKWARD PLAY
?
FORWARD PLAY
?
FAST REWIND/FAST FORWARD PLAY
5.
OPTIONAL
5
6.
13
7.
6
12
(
):
(
)
OPTIONAL
button
(/) buttons
14
4
7
TAPE FUNCTION buttons
?
RECORD/RECORD PAUSE
?
STOP
?
PLAY
?
PAUSE
?
STOP
?
PREV./NEXT
10.
button
button
)/SELECT
(
)
button
(CLEAR
)
button
/
(
CD SEARCH
?
REPEAT button
?
PROG./MEMO button
?
RETURN
)
buttons
(/)
(
buttons
button
)
RESUME button
T.SEARCH button
?
DISPLAY button
?
SCORE button
?
DIGEST button
?
NTSC/PAL button
?
MPX button
?
ECHO button
?
PBC button
11
11.
(
?
9
10
)
?KEYCONTROL(b-KEYCON-#)buttons
?
9.
(
button
)
VCD/CD CONTROL buttons
8?
8
(
?
EQ PATTERN
?
XDSS button
?
OAO button
?
SURROUND(SURR.)
12. VOLUME
(-/+)
(EQ)
button
button
buttons
13. SLEEP button
14. PRESET
(
15. MUTE button
/
)
buttons
INTRODUCTION
PAGE 7
Identification of Controls
Rear Panel
6
OPTIONAL
54
1
3
2
1.
VOLTAGE SELECTOR
4.
AUXILIARY INPUT Jack
2.
POWER Cord
5.
VIDEO OUT Jack
3.
SPEAKER Terminal
6.
ANTENNA Terminal
:
OPTIONAL
Display Window
1
15
kHZ
CDSYNC.
MHZ
2
STEREO
REPEAT
PROG
3
1 ALL
SLEEP
MEMO
REC
4
5
MUTE
6
7
89
10
1.
CD SYNCHRO RECORDING indicator
10. PLAY MODE indicator
2.
CD PLAY/ PAUSE indicator
11. MUTE indicator
3.
PROGRAM indicator
12. TAPE PLAY DIRECTION indicator
4.
MP3 indicator
13.
5.
OAO
6.
XDSS
7.
CD REPEAT indicator
8.
SLEEP indicator
9.
MEMORY indicator
Acoustic
(Extreme Dynamic
13
12
SS
(Orientation
14
Optimizer)
Sound
indicator
System)
indicator
?
?
(OPTIONAL)
(OPTIONAL)
RECORD/ RECORD PAUSE indicator
TIMER indicator
14. FM STEREO indicator
15. FUNCTION indicators
11
PAGE 8
CONNECTION
Antenna Connections
Connect the
(1)
supplied AM(MW)/FM(SW:OPTIONAL)
2 BAND
For
the
(FM/AM)
antennas for
(2) 3
AREA
listening
BAND
to the radio.
AREA
(FM/MW/SW)
For MW/LW
AM(MW) reception, connect
loop antenna (aerial) to the
the
reception, connect
loop antenna (aerial) to the
terminal marked MW/LW
terminal marked AM
MW/LW
AM(MW) loop
antenna (aerial)
(3)
2 BAND
(FM/AM)
antenna
FM external
FM external
antenna(aerial)
(not supplied)
antenna(aerial)
(not supplied)
(4)
AREA
3 BAND
(FM/MW/SW)
AREA
AM
loop antenna
(aerial) (Supplied)
FM external
75
coaxial
loop
(aerial)
antenna(aerial)
(not supplied)
MW
FM external
antenna(aerial)
(not supplied)
coaxial cable
FM indoor antenna
antenna
(aerial)
(aerial)
Position it for the
best
cable
loop
reception
FM indoor
antenna(aerial)
Position
it for the
FM
MW ANTENNA WIRE
best
reception
TWISTED LINE
FM ANTENNA WIRE
otes
?
?
?
To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
Be sure to fully extend the FM antenna wire.
After
connecting
the FM antenna wire,
keep
it
as
horizontal
as
possible.
SW Antenna
CONNECTION
Speaker System
Connect the
speaker
PAGE 9
Connection
cords to the
speaker
terminals.
Red
Black
Left
Speaker
Red
Right Speaker
otes
?
Be
sure
to match the
speaker
cord to the
appropriate
terminal
on
the components:
+
to
+
and
--
to
--.
If the cords
are
reversed, the sound will be distorted and will lack bass.
?
If you
put
?
use
to the
front speakers
speakers.
with
Do not disassemble the front
Connecting
a
low maximum
cover
of
input rating, adjust
the volume
carefully
to avoid excessive sound out-
supplied speaker.
to a TV/Monitor
TV
or
Monitor
OPTIONAL
To TV Video In
VIDEO
VIDEO
To Video out
AUDIO AUDIO
OUT
IN
To AUX Jack
VIDEO OUT
jack
connection
Connect the VIDEO OUT
AUDIO OUT
jacks
jacks
on
the back of the unit to
a
VIDEO IN
jack
of
a
TV
or
monitor.
a
AUDIO IN
jack
of
a
TV
or
monitor.
connection
Connect the AUDIO OUT
AUX
jack
jack
on
the back of the unit to
connection
Tw o
phones jacks marked AUX are provided on the back of the unit for connecting other
(For example, a record player with a pre amplifier, video recorder or tape recorder.)
units.
otes
?
?
Refer to the owner's manual of your TV as well.
When you connect the unit to your TV, be sure to turn off the power and
making.
unplug
both units from the wall outlet before
PAGE 10
BEFORE OPERATION
Setting
1
Press CLOCK.
(If
the clock
CLOCK for
-
2.
the Clock
The hours
requires setting, press and
more than 2 seconds.)
display begins to blink.
Select either the 24 hour
cycle by pressing
(24HR)
or
Press SET to confirm the selected hour
Sleep Timer
When the
1
the 12 hour
To
sleep
cycle.
the time
delay
automatically
display
before the power is
window you
about 5 seconds. This
means
turns off
after 90 minutes.
automatically
Each time the button is
for
can see
pressed the time interval
by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
To
c heck
the
6.
Use PRESET
to set the current hour.
(-/+)
to set current minutes.
Press SET and the correct time is shown
7
the
8
the
on
display.
Press CLOCK at any time to show the time
display, for about 5 seconds.
remaining
specified
time has
on
elapsed.
ote
If you press SLEEP while the
the SLEEP time is reset.
time until the power is
sleep function is active press
briefly. The time remaining until the unit
is displayed for about 5 seconds.
To cancel
sleep
time is
displayed,
SLEEP
turns off
Sleep Timer setting
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again after "SLEEP 10" shows on the
display.
turned off.
While the
Press SET.
(-/+)
that the system
before it turns off is reduced
2
5
turns off after the
turned off, press SLEEP.
In the
Use PRESET
Function
timer is set, the unit
specify
4
PRESET
(12HR)
3
cycle or
(-/+).
hold
BEFORE OPERATION
PAGE 11
Timer Functions
With the TIMER function you
at the time desired.
1
can
have the radio
reception
Press CLOCK to check the current time.
and
2
TUNER-CD-TAPE flash in the
disappears
TIMER
more
-The
previous
memorized
press and hold the TIMER button
than 2 seconds.
memorized timer
previous
"
"
for On
setting
indicators appear in the
minutes time.
Set the turn off hour time
10
Press SET.
11
Set the turn off minutes
12
Press SET.
using
the PRESET
using
the PRESET
using
the PRESET
3
4
1.
When you select TUNER function,
"PLAY" and "REC" indicator flash in
the
display
window
alternately
the volume level
Press SET.
timer
TUNER
play only
"REC" indicator : TUNER play and
recording
b. Select the previous memorized preset
number with PRESET (-/+) and press SET.
:
13 Adjust
(-/+).
14 "TIMER"
for
about 3 seconds.
"PLAY" indicator
(-/+).
display.
Press SET when the desired function flashes.
-
and off
setting,
Time and
a.
on
on
.
9 (-/+).
turn.
For your reference
If you want to correct the
and turned
"OFF TIME" indicator appears for about 0.5
seconds in the display window and then
If you don't set clock, timer function doesn't work.
setting mode.
display window in
play, tape play
Press SET to confirm the turn
8
For your reference
Press TIMER to enter the timer
CD
recording,
15
appears in the display window and the
has been completed.
setting
Turn the
system off.
The selected timer functions
switched
"ON TIME" indicator appears for about
0.5 seconds in the display window and
To cancel
then
Each time the "TIMER" button is
disappears.
2. When you select CD or TAPE function,
"ON TIME" indicator appears for about 0.5
-
seconds in the
display
window and then
disappears.
or
setting
To activate
button
automatically
check the timer
select the timer set
timer
are
and off at the preset times.
on
or
cancel. You
pressed
can
you can
also check the
status.
or
check the timer, press the "TIMER"
repeatedly
so
that
"
"
appears in the
display
dow.
hour
the PRESET
5
Set the turn
6
Press SET to confirm the turn
7
Set the turn
on
using
(-/+).
To cancel the TIMER, press the "TIMER" button
repeatedly
window.
PRESET
on
(-/+).
minutes time
on
hour time.
using
the
so
that
"
"
disappears
from the
display
win-
PAGE 12
Audio
Volume
?
BEFORE OPERATION
Adjustment
MUTE
Adjustment
On unit, turn VOLUME CONTROL KNOB clockwise to
increase the sound level, or counterclockwise to
decrease it.
?
You
On remote,
level,
Press MUTE to turn off the sound, press
VOLUME
use
or use
VOLUME
-
+
to increase the sound
to decrease it
on
the
the remote
again
to
restore.
can
mute your unit in
telephone,
order, for example,
to
"MUTE" indicator flashes in the
answer
display
window.
control.
Sound
?To
can
Select
a
desired sound mode
:
ROCK
:
POP
CLASSIC
Connect
using
impressions.
the EQ
on
the
The "XDSS ON"
or
"XDSS OFF" indicator
To cancel it press XDSS
lights
up.
again.
SURROUND
Linear
To activate surround mode
:
frequency response
More bass, more treble
Less bass, less treble
:
For orchestral music
Select
You
can
a
choose
one among 2 fixed sound
desired surround mode using the
SURROUND
Jack
headphone plug ( 3.5mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
a
and
.
FLAT
Headphone
(Hi-Tone)
bass.
choose between 4 fixed sound
remote control
Dynamic Sound System)
Use the XDSS feature to reinforce treble
activate stereo sound
You
?
XDSS (Extreme
Quality Adjustment
stereo
into the
when
(SURR.)
SURROUND ON
OAO
↔
impressions.
button.
SURROUND OFF
(Orientation
Acoustic
Optimizer)
ON/OFF
Press OAO to reinforce the bass sound. The "OAO ON"
"OAO OFF" indicator
or
lights. To cancel,
again.
Auxiliary (External Equipment) Input
1
2
Connect
an
auxiliary
device i.e. TV
or
VCR, via the
rear
mounted AUX
Press AUX.
ote
You
can
also record from the
auxiliary input
source,
see
Recording
Section.
phone jacks.
press OAO
RADIO OPERATION
Presetting
You
can
Radio Stations
preset 50 stations for FM and AM (SW
OPTIONAL).
Before
tuning,
make
:
that you have
sure
turned the volume down to the minimum level.
Press TUNER/BAND (or BAND on the
control) to show either FM or AM (SW :
AL) in the display window.
1
2
remote
OPTION-
And then every time you press TUNER/BAND
(or BAND on the remote control), FM and AM
(SW : OPTIONAL) change alternately.
3
Press TUNING
frequency
(-/+)
on
panel until the
change, then
when the unit tunes in
on
the remote control.
A preset number will flash in the
(-/+)
display
to select the
preset number
To recall
Repeat steps
Tuning
Use TUNING
(-/+)
Manual
or
(-/+)
until the desired preset
press the button
Automatic
for
more
repeatedly.
than 0.5 seconds.
Tuning
(-/+) briefly
and
repeatedly.
to the Radio
(-/+) repeatedly
preset station you
to select the
want.
Each time you press the button, the unit tunes in
To turn the radio off
Press POWER
Adjust
by rotating VOLUME
(or pressing VOLUME
the remote control repeatedly).
For your reference
If a FM program is
?
noisy
repeatedly so that
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
"
Press MODE/RIF
the volume
non-preset radio stations
manual tuning, see "Manual Tuning" as above.
automatic tuning, see "Automatic Tuning" as
STANDBY/ON) to turn off the unit or
(VCD/MP3/CD, TAPE or
AUX).
CONTROL KNOB
on
(
to select another function mode
?
To listen to
or
or
3 to 6 to store other stations.
Press PRESET
(-/+)
?F
preset numbers
Press and hold PRESET
the next preset station.
?F
the left side.
on
again.
The last received station is tuned in.
3
preset number will flash. To change the preset number,
Use TUNING
Use TUNER/BAND (or TUNER on the remote
control) to select either AM or FM in the
display window.
2
a
The station is stored.
-
Listening
1
the remote control
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
window.
you want.
Press PROG./MEMO
on
cleared.
number appears
a
station.
Press PRESET
Press and hold PROG./MEMO
for about two seconds, "CLEAR" appears in the display
window and then press CLEAR again, the stations are
the front
indication starts to
Press PROG./MEMO
To clear all memorized stations
follow the steps 5-6
release.
Scanning stops
4
5
6
7
PAGE 13
"
To
improve reception
Reposition the supplied
antennas.
otes
?
above.
Use MODE/RIF
switch to Mono
(Radio Interference Filter) function
reception if stereo reception is
distorted
?
While
by noise.
recording weak
to
occurs, press MODE/RIF
AM
broadcasts, if noises
once.
CASSETTE DECK OPERATION
PAGE 14
Tape Operation
Basic
1
2
3
4
To
Playback
Press TAPE
on
the front
panel
remote control
or
STOP(
to select TAPE function.
("NO
TAPE" appears in the
Open
cassette door
display window.)
PUSH EJECT
by pushing
STOP( )/CLEAR on the front panel or TAPE
) on the remote control during playback.
Tape Counter
Playing
Insert cassette with the tape side to the bottom
and then close cassette door.
Press
(or
:
OPTIONAL)
the front
on
panel
remote control.
To
plays
during playback.
display
time appears "TP 0000" in
Play
Rewind
or
window.
Fast Forward
/
After press
on the remote control
()
AUTO STOP DECK
After auto stop deck
Reset
Press COUNT.RESET
position.
or
Stop Play
Press
at the
on the front panel or
during playback, press
tape position you want.
/
PLAY
front side of cassette, the unit
stops automatically.
AUTO REVERSE DECK
Select cassette
playback
OPTIONAL
:
direction
(front
back)
or
with
PLAY MODE button.
Pressing
Function
Display
After the cassette in deck
plays
(backward play)
side, stops automatically.
Once
front
Twice
front and
or reverse
After the cassette in deck
reverse
plays
side, stops
automatically.
Three
After the cassette in deck
times
six times
reverse
plays
repeatedly front and
side, stops automatically.
Recording Setup
Basic
1
2
Setting
To
Press VCD/MP3/CD
or
TUNER/BAND to select
the cassette door and insert
sette into the cassette
To set the
a
blank
cas-
compartment.
The CD
a
complete
and
a
cassette.
recording direction (OPTIONAL)
repeatedly to set the record-
Press PLAY MODE
ing
1
1
direction.
Recording
Press
from Radio, CD
REC
on
or
the front
Auxiliary
panel
or
on
2
mode.
stop mode.
"
"
displays
in the dis-
window.
The
synchronized recording is started
matically after about 7 seconds.
auto-
otes
PLAY(
) (or
:
OPTIONAL)
on
the front
?
panel or remote control.
recording is begun.
To pause the
recording, press
display widow.)
flashes in
If you wish to record from the desired track, select the
desired track with
The
("REC"
Press CD SYNC. in
"REC" flashes and
CD
source
"REC" flashes and holds the cassette in pause
2
synchro recording function dubs
programmed titles automatically into
play
the remote control.
Press
)/CLEAR.
Tape Synchronized
Recording
source.
Open
stop the recording, press STOP (
CD to
?
.
synchro recording.
The function change
recording.
/
is not
before
commencing
possible during
CD
CD/VCD OPERATION
Basic
Playback
To Search
Preparation
In
of
case
Tu rn
using
a
TV
Press
the TV and select the video
on
pictures from this unit.
In case of using an amplifier
Tu rn on the amplifier and select the
can
so
input
so
that you
view the
that you
Basic
can
(When
CD
track
/
a
desired
or scene
repeatedly during playback.
is displayed, press PLAY (
scene
FR X1
FF X1
Playback Setup
(
STANDBY/ON)
to turn
on
the
Press the VCD/MP3/CD button to select CD
no
(reverse) is relatively slow at
pressed again, the speed
becomes faster. (Each time the button is pressed, the
speed increases up to 4 steps.)
The speed will be retained even after the button is
speed
of advance
first. When the button is
unit.
?
function.
The
released.
disc is in the disc drawer, the "NO DISC"
indicator appears.
ote
3
Press CD OPEN/CLOSE
place
OPEN/CLOSE)
into the disc tray.
the disc
(
and
ote
To load
an
8cm
(3 inch) disc, put
it onto the inner circle
of the tray.
4
5
Press CD OPEN/CLOSE
Press
).
PLAY(
(CD ) during playback.
again to resume play.
Stop Play
Press
?
to
Play
Press the button
?
OPEN/CLOSE)
compartment.
Press CD PAUSE
To
(
close the disc
To Pause
To
).
player position
listen to the sound from this unit.
Press POWER
If
a
(TV screen)
?
1
2
PAGE 15
STOP(
Skip
Press
a
)during playback.
Track
or scene
NEXT(
) to go to the next scene or track.
PREV.(
) is pressed once midway
through a scene or track, the player returns to the
start of that scene or track. When it is pressed
again, a scene or track is skipped each time the
button is pressed.
When
This function is not available to
play
a
MP3 file.
PAGE 16
CD/VCD OPERATION
Advanced
Last Scene
Playback (Continued)
Memory
Function
Multiplex
The unit memorizes the
point you stopped a VIDEO CD
and you can resume playback from that point.
It is not available during playing an audio CD.
You
can
select the sound from the
right
or
left channel
and listen to the sound of the selected channel
both the
and left
right
through
In this case, the sound
speakers.
loses the stereo effect.
1
2
Press STOP
(
) during playback.
Press RESUME
The unit starts
?
on
Press MPX
the remote control.
playback
from the
point
you
Time Search function is
discs that have
only
a
especially
as a
guide
MONO L
Twice
MONO R
You
You
can
right
You
STEREO
times
playing
can
hear the sound of the
left channel.
to
Three
useful when
disc.
Function
Once
Time Search Function
This function lets you use elapsed time
find a certain point on a VIDEO CD.
a
Screen
Pressing
the VIDEO CD in step 1.
"RESUME" appears on the TV screen.
stopped
?
during playing
Each time you press the button, the indication and the
sound from the speakers change as follows.
hear the sound of the
channel.
can
hear the standard
stereo sound.
few track divisions.
otes
Press T.SEARCH
1
during playing
or
stopping.
(TV screen)
?
?
This
screen doesn't appear on the display window.
This function doesn't work for TUNER, TAPE and AUX
functions.
TIME SEARCH
_
_:_
_
PBC
2
?
of the
point that you want to locate.
Playback is started automatically from the
?
For your reference
This function can not be used
?
AUDIO CD and VIDEO CD
playing VIDEO CD with PBC functions (Version
discs), you can enjoy playing simple interactive soft-
ware, software with search
?
TIME SEARCH 22:15
When
2.0
entered
time.
2.0
Play (Playback Control Play)
Press the NUMERIC buttons to enter the time
VIDEO CD.
during Digest Play
with PBC function (Version
,
discs).
Display
?
?
Function
Press DISPLAY
-
You
can
Insert VIDEO CD with PBC function, press
1
PLAY
You
can
-
You
can
during playing.
elapsed time per a track.
again during playing.
2
(
).
on
the disc.
menu
display
on
by pressing
the remote control.
now
menu
executed.
number you want
by press-
the remote control, and
then press the SELECT button.)
ing
To
/
window.
number you want
NUMERIC buttons
(Or Select the
view the remained time per a track.
Press DISPLAY once more during playing.
view the total remained time
Select the
The selected item is
view the
Press DISPLAY
-
etc.
play allows you to play VIDEO CD interactively, following the menu screen on the TV screen.
Also refer to the instructions supplied with the disc, as
the operating procedure may differ according to the
"PBC" appears in the
?
functions,
PBC
the
on
Stop play
Press STOP
(
) during playback.
Togothenextofamenu
Press NEXT.
To go back to
a
previous
menu
Press PREV..
Togobacktothetopofamenu
Press RETURN
(
).
OPERATION
CD/VCD
Advanced
Playback (Continued)
Disc
Digest Playback
You
otes
?
?
Basic
You
can
1
Press NUMERIC button 2.
During playing a VIDEO
picture of the
?
shows still
pictures
following
at
you want
time on the TV
by observing
or scene
one
appears
on
1.INTRO
2.DISC
3.TRACK
4.EXIT
the TV
screen.
each track
or scene on
10 seconds the
4
7
6
5
the TV
scenes
screen
of tracks 1
beginnings
of
2
).
The TV
(
9.
shows still
screen
To go back to the
pictures of tracks 10 to 18.
previous screen, press PREV..
Press NUMERIC buttons to select the track you
want.
The unit starts
the disc.
of the tracks of the
pictures
Press NEXT
Playback
Press NUMERIC button 1.
only plays
3
9
over
?
This function
2
8
tracks numbered
?
?
1
To view still
DIGEST MENU
Intro Scan
,
first
screen.
during stopping.
menu
CD
to 9.
locate the disc
Press DIGEST
The
without PBC functions.
Setting
several still
locate the track you want by observing the first
on the disc at one time on the TV
of 9 tracks
screen.
If you start Digest play before you start playing a
VIDEO CD with PBC functions, the unit automatically
playing
Digest Playback
can
picture
This function is not used in MP3 file CD.
starts
PAGE 17
playing
To cancel Disc
Press STOP
from the selected track.
digest playback
).
(
INTRO SCAN
Disc Track
You
?
In
case
?
In
case
of audio CD, you can only hear
of VIDEO CD, you will also see
a
sound.
can
point
you want
ture of 9EA of each section at
screen.
a scene.
Playback
locate the
This
might
is divided into
1
a
by observing
time
one
on
first
pic-
the TV
be useful when you play
as a movie.
a
disc which
few tracks, such
Press NUMERIC button 3.
During playing
a
VIDEO CD
track into 9 sections and TV
pictures
,
the unit divides the
screen
shows still
of each section in order.
1
2
3
8
9
4
7
6
5
For your reference
To view sections of another track, press NEXT
such as Disc digest play.
2
Press NUMERIC buttons to select the
point
want.
The unit starts
playing
To cancel Disc track
Press STOP
(
).
from the selected
play
point.
you
PAGE 18
CD/VCD OPERATION
Advanced
Playback (Continued)
Program Play Setup
Repeat Playback
NOTE: The repeat
play
does not work in PBC ON status
of the VIDEO CD with PBC function
To
play
one
track
Press REPEAT
-
"REPEAT 1"
(Version 2.0).
You
repeatedly
play
one
disc
Press REPEAT
-
play
-
all disc
1
repeat play
"repeat
indicator"
3
4
5
Press PROG./MEMO
once during program play.
"REPEAT 1" appears in the display window.
(One track repeat)
Press REPEAT
program play.
"REPEAT ALL" appears in the display window.
(All
the remote control in
Use PREV./NEXT to select the track.
Press REPEAT
-
on
mode.
2
Program repeat play
?
Stop
repeatedly
Press REPEAT several times until
-
Press PROG./MEMO
the
during playback.
in the display window.
disappears.
?
contain up
once more
"REPEAT ALL" appears
To cancel
-
on
the discs and
This function is not available to MP3 discs.
repeatedly
again during playback.
display window.
all tracks
Press REPEAT
on
can
The program playback does not work in PBC ON status of
the VIDEO CD with PBC function(Version 2.0).
?
"REPEAT 1" appears in the
To
arrange the order of the tracks
otes
during playback.
appears in the display window.
once
?
To
can
create your own program. The program
to 20 tracks.
program
again during
repeat)
To
In
case
of
using
NUMERIC
(0~9)button,
on
press "0" and "3".
the remote control.
Repeat steps 1~3to select additional
tracks.
Press PLAY
c heck
()
.
program contents
Press PROG./MEMO
the remote control in
on
Stop
mode.
-
A disc, track and program number will be
displayed.
To clear program contents
Press PROG./MEMO
on
the remote control in stop
on the front panel or STOP
mode. Then press CLEAR
()
on
the remote control.
To add program contents
1.
Press PROG./MEMO
on
in the program
Number" blinks.
repeatedly
2. Repeat steps
the remote control
Stop
mode until "Disc
2~5as shown to the above.
To
modify
1.
Use PROG./MEMO
program contents
on
the remote control to
program number you want to
2. Repeat steps
modify.
2~5as shown to the above.
display
CD/VCD OPERATION
Advanced
MP3
Playback
Playback
otes
?
1
Load
an
MP3 disc.
The ROOT
directory
menu
is
displayed
on
the TV
?
screen.
The
directory
English.
and
file
name
If you select another file
FOLDER
TRACK_1
TRACK_3
TRACK_5
TRACK_7
TRACK_9
To
TRACK_2
TRACK_4
TRACK_6
TRACK_8
?
Press PREV./NEXT(/) to select the
directory where MP3 files that you want to play
?
located and then press SELECT.
MP3 FILE
:
?
MUSIC_2
MUSIC_4
MUSIC_6
MUSIC_4
MUSIC_5
?
directory
on
the
disc.
TRACK_1
:
PAGE 01/ 02
MUSIC_1
MUSIC_3
MUSIC_5
MUSIC_4
MUSIC_5
4
Press PLAY
()
MUSIC_2
MUSIC_4
MUSIC_6
MUSIC_4
MUSIC_5
to start
playback
of
a
file.
For your reference
?
?
Press PREV./NEXT(/)
previous file during playback.
Press RETURN (
) to move
during playback.
FOLDER
:
to
play
TRACK_1
TRACK_3
TRACK_5
TRACK_7
TRACK_9
the next file
to the ROOT
ROOT
PAGE 01/ 01
TRACK_2
TRACK_4
TRACK_6
TRACK_8
an
MP3 file
after 5
repeatedly
during playback,
repeatedly.
in the display window.
once
the
cur-
If you press REPEAT twice during playback, the all
MP3 files on the disc will play repeatedly.
"REPEAT ALL" appears in the display window.
If you press REPEAT three times, the repeat play will
Press PREV./NEXT(/) to play the next file or
previous file during playback.
Press PAUSE ( ) to enter the pause mode, press
PLAY or PAUSE ( ) again to return to normal playback.
to select the
PREV./NEXT(/)
desired MP3 file of the selected
MP3 FILE
PREV./NEXT
played
For your reference
TRACK_1
?
Press
the file is
in
be cancelled.
PAGE 01/ 02
MUSIC_1
MUSIC_3
MUSIC_5
MUSIC_4
MUSIC_5
Play
If you press REPEAT
rent MP3 file will play
"REPEAT 1" appears
?
3
only displayed
ROOT
:
PAGE 01/ 01
are
is
by pressing
(/) during playback,
seconds automatically.
2
PAGE 19
or
directory
Press STOP
(
)
to
stop the playback.
PAGE 20
ADVANCED OPERATION
KARAOKE
Karaoke Function
To
You
You
can play KARAOKE(singing along) with VCD by
connecting a microphone to the unit.
You can enjoy KARAOKE with a stereo-recorded disc,
even if it is a non-karaoke disc, by reducing the singer's
Adjust ECHO Volume
can give
microphone.
?
an
Press ECHO
echo effect to the sound from the
repeatedly
to
adjust
the
of
strength
echo.
voice.
ECHO-1, ECHO-2
or
ECHO-3 is
displayed
in the
display
window.
1
2
3
Press POWER
(
STANDBY/ON)
to turn
on
the
player.
set the echo indication
it,
in
disappear
window.
display
Select the CD function.
Press CD
OPEN/CLOSE( OPEN/CLOSE) to
open the disc compartment, load a disc with
To
Change
You
can
the
change
the
Key (KEY CONTROL)
key
to suit your vocal range.
Press KEY CONTROL
repeatedly
to find
(b KEY CON # ) buttons
the key that suits your vocal
-
it.
Connect your
lower steps and the original
The setting appears on the
microphone
to the MIC
Tu rn the MIC VOLUME knob to
adjust
jack.
volume.
Press SCORE to enter the karaoke mode.
In
case
can
adjust
the
key
to 15
-
the micro-
of Video CD, "KARAOKE" appears in the
-
range.
You
phone
5
cancel
the
the label side up.
In case of a VIDEO CD with PBC functions, "PBC"
appears in the display window. Press PBC to cancel
4
?To
steps (7 higher steps
with Karaoke
You
during playing KARAOKE.
explanation section.
record
7
screen.
Recording
can
,
key).
Refer to the "RECORDING"
screen.
6
Select the desired track number
on
the disc
?
pressing
PREV./NEXT
(
/
).
playback
-
Press
PLAY(
).
Sing along with the accompaniment.
play
the next, press PREV./NEXT
-
?
occurs
microphone(s)
away from the TV
or
Lower the volume of the TV
or
the mic volume.
If the sound is distorted when the unit is connect-
-
(
/
) again.
?
Cancel ECHO function.
If sound
through
the
microphone
is
extremely
loud
it may be distorted. In this case turn the MIC
volume toward minimum and set to "ECHO OFF"
ote
is finished, the score will appear
the screen And the unit will automatically pause after
playing back of each track.
playback
by pressing
on
the
Cancel ECHO function.
edaTV
Come out the Score
If the track
howling
Move the
speakers.
For your reference
To
If
-
If you press the NUMERIC buttons, the
is started automatically.
7
otes
by
ECHO.
PAGE 21
REFERENCE
Selection
System
You
?
?
?
can
NTSC
enjoy
or
(NTSC/PAL)
PAL discs
by using
the NTSC/PAL button to choose the
appropriate system.
If you try to play back PAL disc with NTSC-TV. The unit will not play back the disc.
When the system of your unit does not coincide with the system of your TV, normal color picture may not be displayed.
When you play back NTSC disc with PAL-TV, some discs may produce black bands at the top and bottom of the screen.
Position of
System
NTSC/PAL
PAL VCD disc
PAL
PAL
NTSC
NTSC
NTSC VCD disc
MULTI system TV
NTSC/PAL disc
NTSC
Disc
Available disc
Connected TV
Select
or
PAL
Requirements
This unit
can play back the following discs.
equipment has been designed to play discs bearing the identification logo shown
CD: compact disc recorded only with digital audio signals.
VIDEO CD : compact disc recorded with compressed digital audio and video signals.
This
Contents
Disc mark
Audio
+
below.
Maximum
Disc Size
12
Video CD
as
Video
8cm
20 minutes
12
74 minutes
cm
Audio
Audio CD
20 minutes
8cm
In
addition, this unit
Notes
This
player
can
on
play
a
CD-R
kinds of
or
CD-RW that contains audio titles
playback according
Type
can
enjoy
to the discs
You
?
two
Small
cause
type.
?
can
impact while video disc is playing
abnormality on pictures.
Because video disc
compressed
(Version.
1.1
disc)
Play
interactive software
displayed
PBC functions
TV screen, in addition to the
video playback function of
(Version
2.0
discs)
on
on
even a
can cause
video and audio and
make the disc unuseful. Therefore,
much more care is required.
?Amosaic
the
menu screens
its surface
can
even
using
VIDEO CD with
on
influence
enormous
Enjoy video playback (moving
pictures) as well as music.
reproduces data
regular disc,
in 1/100 of
minor scratch
VIDEO CD
functions
MP3 files.
CAUTION
conforms to Version 1.1 and Version
without PBC
or
VIDEO CD
2.0 of VIDEO CD standards. You
Disc
Playback Time
74 minutes
cm
appear
with faint checker pattern
the pictures with many
can
on
movements and detailed
this is not
a
motion, however,
defect.
Version 1.1 discs.
otes
?
Discs should be
?
Never touch disc's surface.
?
kept
clean at all times. -Stains, scratches and dust
Depending on the conditions
be played on the unit.
of the
recording equipment
or
on
disc's surface
cause
the CD-R/RW disc itself,
bad
quality
some
video and audio.
CD-R/RW discs cannot
PAGE 22
REFERENCE
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Possible Solution
No power.
?
The power cord is disconnected.
No
?
The TV is not set to receive VCD
picture.
signal
?
the power cord into
outlet securely.
?
Select the
output.
Plug
on
the TV
The video cable is not connected
?
securely.
There is
no
sound
or
very low-level
sound is heard.
only
The
is poor.
The unit does not start
wall power
appropriate video input mode
the picture from the unit
the TV
screen.
Connect the video cables into the
jacks
securely.
?
The connected TV power is turned off.
?T
?
The audio cables
?I nsert the audio cable into the
not connected
are
securely.
a
playback picture
a
so
on
appears
?
service.
contacting
the TV.
u r non
jacks
securely.
?
The power of the equipment connected
with the audio cable is turned off.
?T urn on the external equipment
connected with the audio cable.
?
The audio
?
Replace
?
The disc is
dirty.
?
Clean the disc.
?
The disc is
placed upside
cord is
connecting
damaged.
down.
?
it with
new one.
Place the disc with the
playback
side
down.
playback.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
Severe hum
heard.
or
noise is
?
The disc is
?
The
?
The disc is
?
The speakers and components
connected poorly.
?
plugs
dirty.
and
jacks
are
dirty.
dirty.
The unit is located with TV
are
on
the disc tray
correctly
guide.
?
Clean the disc.
?
Wipe them with
with alcohol.
?
Clean the disc.
?
Connect the
a
cloth
speakers
slightly
moistened
and components
securely.
?M
nearly.
ove
your TV away from the audio
com-
ponents.
Recording
cannot be
?
The components
are
connected
?
Connect the components
?
Select the
correctly.
incorrectly.
done.
?
The
source
is selected
incorrectly.
source
SELECT button
with the FUNCTION
(TUNER/BAND,
VCD/MP3/CD, TAPE, AUX on the unit
or CD/VCD, BAND, AUX, TAPE on the
remote
Radio stations cannot
?
The antennas
are
connected
be tuned in.
poorly.
control).
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
The remote control
does not work properly.
?
The
signal strength of the stations is
(when tuning in with automatic
tuning).
too
?T
une
in the station
manually.
weak
?
The remote control is not
remote
?
sensor on
pointed
at the
?P oint the remote control at the remote
the unit.
sensor on
The remote control is too far from the
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
unit.
?
There is
an
obstacle in the
path
of the
the unit.
?
remote control within about
remote control and the unit.
?
The batteries in the remote control
exhausted.
are
the batteries with
new ones
REFERENCE
Specifications
Refer to the back
Pow er
80W
Supply
Consumption
Weight (Approx.)
[Genral]
[VCD/ ]
External Dimensions
AM
SW (option)
[Amp]
x
H
x
D)
(1 kHz)
(1 kHz)
70 dB
Video output
1.0
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Output Power
87.5
V, 75 Ω, RCA jack
T.H.D
0.15%
Frequency Response
Signal-to-Noise Ratio
Tape Speed
40
Wow Flutter
0.25%
108.0 MHz
-
60/55 dB
60
(MONO/STEREO)
450 kHz
35 dB
100
1800 Hz
-
5800
-
18000 kHz
450 kHz
27W
-
+
27W
25000 Hz
80 dB
3000
3% (MTT-111. NORMAL-SPEED)
(MTT-111, JIS-WTD)
120sec (C-60)
125
-
±
8000Hz
43dB
(P/B)/ 43dB (R/P)
(P/B)/45dB (R/P)
55dB (MTT-5511)
2 Way 2 Speaker
50dB
6Ω
70-20000Hz±20%
87 dB/W
Rated
30
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight (Approx.)
are
MHz, 87.5 -108.0 MHz
10000 Hz
-
Sound Pressure Level
specifications
65 -74
522-1611kHzor530-1610kHz
Frequency Response
Signal to Noise Ratio
Channel Separation
and
or
10.7 MHz
Erase Ratio
Designs
18000 Hz
-
70 dB
Type
Impedance
Frequency Response
[Speakrs]
of the unit.
160 X 248 X 288mm
40
F.F/REW Time
[TAPE]
panel
5.2kg
(W
Frequency response
Signal-to-Noise Ratio
Dynamic range
FM
[Tuner]
Pow er
subject
(1m)
±
2dB
60W
160X248X228mm
2.5kg
to
change
without notice.
PAGE 23
P/NO :3834RH0042X
Download PDF