advertisement
▼
Scroll to page 2
of 35
ABANS_LX-D3350A_ENG_78N DVD MICRO HI-FI SYSTEM OWNER'S MANUAL MODEL : LX-D3350 (LX-D3350A/D/X, LXS-D3350V, LXS-D3350W) Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications improvement. are subject to change without notice for Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. The exclamation point is intended to alert the within user an equilateral triangle to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in such as a book case or similar unit. a confined space CAUTION: This unit To employs ensure manual proper a Laser use System. of this product, please read this owner's carefully and retain for future reference should the require maintenance, contact (see service procedure). an unit authorized service location It is forbidden Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on NOTES ON COPYRIGHTS: the apparatus. by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 ___________________________________ ___________________________________ to Table of Contents INTRODUCTION .23-25 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............23 . SafetyPrecautions.........................2 . . . . . . TableofContents..........................3 GeneralFeatures.....................23-25 BeforeUse..............................4-5 MovingtoanotherTITLE...............23 23 Moving to another CHAPTER/TRACK PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 . . . . . Search.............................23 Still Picture and Frame-by-Frame Playback . 24 AboutSymbols..........................5 SlowMotion.........................24 FrontPanel/RearPanel.....................6 RemoteControl............................7 Repeat............................24 RepeatA-B.........................24 TimeSearch........................24 PREPARATION LastSceneMemory...................24 Connections............................8-10 Zoom..............................25 ConnectingtoaTV.......................8 ConnectingtoAntenna.....................9 SpeakerSystemConnection................9 .10 ConnectingtoAuxiliaryEquipment. .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-19 VolumeAdjustment.......................11 SubwooferlevelAdjustment...............11 MarkerSearch.......................25 . . . . . . . . . . . . . . . . . . MUTE................................11 SoundQualityAdjustment.................11 SURROUND............................11 XDSS(ExtremeDynamicSoundSystem). OAO (Orientation Acoustic Optimizer) ON/OFF . . . . . . . . .11 . 11 DIMMER..............................11 SettingtheClock........................12 SleepTimerFunction.....................12 .12 UsingMicrophone(OPTIONAL). . . . . . . . . . . . TimerFunction..........................13 Mini Glossary for Audio Stream & Surround Mode 14 SoundMode...........................14 GeneralExplanation......................15 On-ScreenDisplay.......................15 InitialSettings........................16-19 GeneralOperation....................16 LANGUAGE........................16 DISPLAY...........................17 AUDIO.............................18 OTHERS...........................18 LOCK(ParentalControl)...............19 OPERATION OperationwithRADIO...................20-21 Presettingtheradiostations................20 Listeningtotheradio.....................20 RDSFunction-OPTIONAL................21 SpecialDVDFeatures....................25 TitleMenu..........................25 DiscMenu..........................25 CameraAngle.......................25 .25 ChangingtheAudioLanguage. .25 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . . . . . . . . . Subtitles...........................25 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc . . 26-27 . . . 26 Pause.............................27 MovingtoanotherTrack...............27 RepeatTrack/All/Off..................27 Search.............................27 OperationwithJPEGDisc...................28 ViewingaJPEGdisc.....................28 SlideShow.........................28 MovingtoanotherFile.................28 StillPicture.........................28 ProgrammedPlayback.....................29 .29 RepeatProgrammedTracks .29 ErasingaTrackfromProgramList. .29 ErasingtheCompleteProgramList. OperationwithDivXDisc...................30 . . . . . . . . . . . . . . . . . . . . . . REFERENCE Troubleshooting..........................31 LanguageCodeList.......................32 CountryCodeList.........................33 Specifications............................34 About the symbols for instructions Indicates hazards itself or other AboutRDS.........................21 ProgrammeSearch(PTY)..............21 OperationwithTAPE......................22 BasicPlayback.........................22 ToStopPlay...........................22 TapeCounterReset......................22 .22 ToPlayRewindorFastForward. 22 Recording from Radio, CD or Auxiliary source CD-SynchroRecording...................22 . likely to cause material damage. Indicates special operating Indicates tips and hints for harm to the unit features of this unit. making the task easier. . . . 3 INTRODUC Before Use Playable Disc-related terms Discs Title DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) DVD±R, DVD±RW, CD-RW that contains audio titles, can play or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number Video CD In addition, this unit (DVD only) a SVCD, and CD-R or MP3, WMA, JPEG or DivX files. enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. (Video CD and audio CD only) Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want. Track Notes -- -- -- Depending the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes on on Scene On video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs Some of video CDs playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available Types other functions may be added. Refer also to the instructions supplied with the DVDs with the and Video CDs. Some DVDs made for business purposes may not be played on the unit. of or DVDs labelled will also of the this system. If you try to play any other DVD, the message "Check Regional Code" will appear on the TV screen. ALL the DVD, Depending on be labelled even area 4 restrictions. play on region code indication may though playing the DVD is prohibited by no are two types of video CDs: Video CDs equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact functions, or other typical computer-like operations. Moreover, still pictures high system via resolution menus, search can be played if they are included in the disc. Video CDs not code of the DVD player and DVDs Your system has a region code printed on the back unit and will only play DVDs labelled with the same region code. Regional There equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use Storing Precautions After the unit Handling shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position When the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, turn off the or use volatile such liquids, as leave marks there may be a considerable temperature increase inside the car. light, as Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. on insecticide spray, or the surface. Do not To clean the cabinet soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzine, Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- the unit Cleaning use a store the disc in its case. plastic products in long period of time. They will the unit. Do not leave rubber a playing, the exterior surfaces clean contact with the unit for a Use discs use thinner, or are moistened with a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older About vinyl records. Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " " may appear on the TV This icon means the function manual is not available About the disc on Handling Discs discs Do not touch the Hold the disc get on playback side of the disc. by the edges so that fingerprints the surface. Do not stick paper or tape on the disc. will not on DVD VCD Video CDs CD Audio CDs MP3 MP3 disc WMA WMA disc JPEG JPEG disc screen for instructions following symbol is represented by the symbol. one to the disc DVD DivX during operation. explained in this owner's that specific DVD video disc. symbols A section whose title has applicable only Notes symbol display of the DivX disc 5 INTRODUC Front Panel/ Rear Panel 14 13 1 12 15 11 2 10 9 3 16 4 17 8 AUX 18 5 7 6 SUB WOOFER (6 ) 19 20 21 POWER 1. 2. ? button STANDBY/ON) ( Z PUSH EJECT 7. 8. CLOCK button ? ? ? TIMER button 4. ? ? ? ? ? ? ? (-/+) (B) CD SKIP buttons 11 (b) button STOP bb/BB >) , TAPE REWIND/ ([])/STEP (x)/CLEAR buttons >) 15. ? button button OAO button RECORD/ RECORD PAUSE HEADPHONE SOCKET 5. 6. ? ? ? ? ? ? 6 EQUALIZER (EQ) button ( (zREC/[]) PHONES) - button (Y Pb Pr) Connector MONITOR OUT Connector S-VIDEO OUT Connector OPTICAL OUT Connector 16. FM/AM ANTENNA Connector 3.5mm button 17. VOLTAGE SELECTOR 18. AUX INPUT PLAY MODE button SET/COUNT. RESET/RDS COMPONENT VIDEO OUT/ PROGRESSIVE SCAN ? ? (Z) 14. CD TRAY ? ? OPTIONAL REMOTE SENSOR ? ? : OPTIONAL 13. DISPLAY WINDOW FAST FORWARD (. bb/BB TUNING (-/+) buttons CD PAUSE . 12. OPEN/CLOSE button (. (MIC) : (TUNER/BAND, DVD/CD, TAPE, AUX) TAPE REVERSE PLAY PLAY MIC JACKS (MIC VOL.) 10. FUNCTION SELECT buttons VOLUME knob PRESET MIC VOLUME KNOB WOOFER LEVEL knob 9. XDSS button 3. position : OPTIONAL (L/R) 19. SUB WOOFER OUTPUT (OPTIONAL) CD SYNCHRO RECORDING MODE/RIF button PROGRAM/MEMORY button button (CD SYNC.) button 20. SPEAKER Connector 21. POWER CORD Remote Control POWER MUTE 20 1 TUNER/BAND DVD/CD AUX 2 1. POWER button 2. FUNCTION SELECT buttons 3. (TUNER/BAND, DVD/CD, AUX) NUMERIC buttons (0-9) 4. TAPE FUNCTION buttons - - 19 PRESET - 3 - - REVERSE PLAY PLAY (B) REWIND/ FAST FORWARD PLAY RECORD/ RECORD PAUSE TAPE STOP SET UP button 6. ARROW buttons (For use in highlighting DISPLAY 18 5 6 on a GUI menu screen.) 7. SELECT/ENTER button 8. MENU button 9. display the menu screen included on DVD video discs.) SCAN (bb/BB)/ SLOW (t/T)/SKIP (./>) (Use SELECT /ENTER (z/[]) selection a screen, TITLE and MENU SET UP (bb/BB) (x) 5. 4 INTRODUC (b: optional) the MENU button to buttons 7 MENU TITLE 17 8 9 PROGRAM 10. PROGRAM/ REPEAT/ REPEAT A-B buttons 11. 12. SCAN STOP (x), PAUSE/STEP, PLAY (B) buttons EQUALIZER (EQ)/ OAO/ SOUND/ AUDIO/ CLEAR / ZOOM buttons SLOW REPEAT 16 10 REPEAT A-B SKIP 13. DIMMER/ SLEEP/ ECHO buttons 14. SURROUND (SURR.)/ XDSS/ SUBTITLE (S-TITLE) RETURN / MARKER/ SEARCH buttons STOP PAUSE/STEP 16. VOLUME -/+ buttons PLAY 11 17. TITLE button EQ OAO SURR. XDSS (Use the TITLE button to included SOUND AUDIO S-TITLE RETURN CLEAR ZOOM MARKER SEARCH 14 12 display discs.) DVD video on the title screen 18. DISPLAY button 19. PRESET ( / ) buttons 20. MUTE button DIMMER SLEEP ECHO 13 Remote Control Remote control Operation Range Point the remote control at the remote sensor battery and press Detach the the buttons. Distance: About 23 ft the (7 m) battery cover on of the remote control, and insert two R03 (size AAA) from the front of the remote sensor Angle: installation rear batteries with About 30° in each direction of the front of the and aligned correctly. remote sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Connections Connecting Make the to a TV of the following connections, depending capabilities of your existing equipment. one ips Depending on Progressive Scan (ColorStream If your television is your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below. best connections. connection high-definition or "digital ready" television, you may take advantage of the units progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the unit. on Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the pro) a Connect the COMPONENT VIDEO/ PROGRESSIVE SCAN on the jacks from the unit to the corresponding TV using an optional Y Pb Pr cable (C). in jacks Caution -- Make sure the unit is connected Select the correct AV -- directly to the TV. ote your TV. Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection input on -- Set the Progressive to "On" on the Setup progressive signal, see page 17. menu for system. Rear of TV Video connection Connect the MONITOR OUT VIDEO IN jack on the TV jack from the unit to the using the video cable supplied (V). COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Pr Pb VIDEO S-VIDEO IN IN Y L S-Video connection Connect the S-VIDEO OUT VIDEO IN jack Component on the TV Video jack on the unit to the Susing the S-Video cable (S). (Color Stream ) connection C V Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the jacks from the TV using an Y unit to the Pb Pr corresponding cable (C). in AUX 8 S Connections Connecting to Antenna Connect the - - supplied FM/AM antennas for listening Connect the AM loop antenna to the AM antenna to the radio. PREATION connector. Connect the FM wire antenna to the FM antenna connector. otes To prevent noise pickup, keep the AM antenna away from the unit and other loop component. fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible. Be AUX sure to Speaker System Connection Connect the speaker cords to the speaker connector. AUX SUB WOOFER (6 ) otes Be are sure to match the speaker cord to the appropriate terminal on the components: + to + and -- to --. If the cords reversed, the sound will be distorted and will lack base. If you use front the speakers. speakers with low maximum Do not disassemble the front cover of input rating, adjust the volume carefully to avoid excessive output supplied speaker. 9 on Connections to Connecting can use VCR Connect a You or VCR Auxiliary Equipment other unit connected to the AUX connector. or auxiliary device, etc to the AUX connector. 1 Select AUX function pressing the AUX button 2 on the unit or the remote control. VCR (or Auxiliary Device, etc) IN OUT VIDEO AUDIO (L) AUDIO (R) To AUDIO OUT X To AUDIO IN Connecting Connecting to equipped with to an a Optional Equipment amplifier equipped with two channel multi-channel decoder digital stereo (PCM) (Dolby DigitalTM or MPEG 2) Connect the OPTICAL OUT connector of this unit to the corresponding in jack or to an on your Audio/ Video receiver Amplifier or Receiver. Amplifier or Receiver (or Digital Device, etc) AUX ote If the audio format of the strong, distorted sound 10 digital output or no does not match the sound at all. capabilities of your unit, the receiver will produce a Before Volume SURROUND Adjustment VOLUME knob clockwise to increase the sound ?Turn level, ? Operation Press SURROUND counterclockwise to decrease it. or Use VOLUME VOLUME - to increase the sound + level, or use to decrease it on the remote control. Sub woofer level To activate surround mode Adjustment (SURR.) to reinforce surround effect. SURROUND ON XDSS SURROUND OFF (Extreme Dynamic Sound System) Turn WOOFER LEVEL knob clockwise to increase the Press XDSS to reinforce treble and bass. sound level lights up. To cancel it press XDSS again. The "XDSS OFF" indicator lights up. the front on panel, or counterclockwise to decrease it. - The "XDSS ON" indicator - MUTE Press MUTE to turn off the sound, press to again the can (Orientation Acoustic Optimizer) ON/OFF restore. You OAO mute your unit in order, for example, to flashes in the telephone, display answer window. Press OAO to reinforce the bass sound. The "OAO ON" or "OAO OFF" indicator lights. To can- cel, press OAO again. Sound Quality Adjustment DIMMER ?T o activate stereo sound You can Select a choose between 4 fixed sound desired sound mode using impressions. the EQUALIZER (EQ). FLAT : Linear ROCK : POP : More bass, more Less bass, less treble CLASSIC : For orchestral music ?Headphone Connect a frequency This function is darken the display window by half in power-on status. Press DIMMER on the remote control. To cancel it press the button again. response treble Jack stereo headphone plug ( 3.5mm) into the headphone jack. The speakers are automatically disconnected you plug in the headphones (not supplied). when 11 PREATION Before Setting 1 Operation the Clock Using Microphone (OPTIONAL) You Press CLOCK. requires setting, press and for more than 2 seconds.) The hours display begins to blink. (If the clock hold CLOCK - Select either the 12 hour 2. cycle by PRESET (-/+) (12HR) on cycle or the 24 hour the front Use PRESET 4 (-/+) microphone to the MIC socket. "ECHO-OFF" will be shown in the Play a a display window. music you want. Sing along with the accompaniment. Adjust the microphone volume by turning MIC VOLUME KNOB. cycle. For your reference You can record during using microphone. Refer to the "Recording" explanation section. (See page 22.) to set the current hour. Use PRESET (-/+) When not to set current minutes. Press SET and the correct time is shown on display. 8 Press CLOCK at any time to show the time the display, for about 5 seconds. Sleep To sleep timer is set, the unit automatically the specified time has elapsed. the time delay the on turns before the power is In the display window you can see SLEEP 180 for about 5 seconds. This means that the system turns automatically after 180 minutes. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 → 120 →90→80→70 → 60→ 50 → 40 → 30 → 20 →10 → OFF→SLEEP 180... To check the remaining time until the power is turned off. function is active press SLEEP The time remaining until the unit turns off is While the sleep briefly. displayed for about 5 seconds. ote If you press SLEEP while the sleep time is displayed, the SLEEP time is reset. To cancel Sleep Timer setting If you wish to stop the function, press the SLEEP button repeatedly until "SLEEP 10 appears, and then press " SLEEP display 12 once again window. after "SLEEP 10 To Adjust ECHO You give an microphones. can set the MIC volume turn off the MIC and remove the " shows on the Volume echo effect to the sound from the Press the ECHO turned off, press SLEEP. off or microphone, microphone from the MIC socket. If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC volume control. If sound through the microphone is extremely loud, it Timer Function specify the may be distorted. In this case, turn the MIC volume control toward minimum. When the off after using knob to minimum 7 3 by connecting otes 6. 2 source Press SET. 5 1 1 3 Press SET to confirm the selected hour 3 Connect your 2 panel. (24HR) or sing to a music microphone to the unit. can repeatedly. ECHO-OFF→ECHO-1 →ECHO- 2 Before Operation Timer Function With the TIMER function you can have the radio reception and recording, CD or tape playing turned on and 7 off at the time desired. 1 8 Press CLOCK to check the current time. If you don't set clock, timer function doesn't work. Press TIMER to enter the timer 2 TUNER-CD-TAPE flash in the setting mode. display window in turn. For your reference If you want to correct the previous memorized TIMER press and hold the TIMER button seconds. setting, The previous "" 3 4 memorized timer indicators appear in the setting more for on than 2 Time and display. Press SET when the desired function flashes. 1. a. When you select TUNER function, 'PLAY' and 'REC' indicator flash in the display window alternately for about 3 seconds. 'PLAY' indicator : TUNER 'REC' indicator : TUNER play only play and recording memorized preset number with PRESET (-/+) on the front panel previous and press SET. 'ON TIME' indicator appears for about 0.5 seconds in the display window and then disappears. 2. When you select CD or TAPE function, 'ON TIME' indicator appears for about 0.5 seconds in the display 5 6 on PREATION on minutes time. disappears . Set the turn off hour time 9 (-/+). Press SET. 10 11 12 13 14 Set the turn off minutes Press SET. Adjust (-/+). the volume level pressing PRESET Press SET. "" appear in the display window and the timer setting has been completed. Tu rn the system off. The selected timer functions To cancel the timer set or on or are automatically and off at the preset times. check the timer cancel. You can you can select also check the timer pressed status. To activate button pressing PRESET (-/+). 15 setting pressing PRESET or check the timer, press the TIMER repeatedly so that " " appears in the display window. To cancel the TIMER, press the TIMER button repeatedly so that " " disappears from the display window. window and then disappears. Set the turn pressing PRESET Press SET to confirm the turn Each time the TIMER button is function flashes. Select the minutes time (-/+). switched b. Press SET when the desired c. on 'OFF TIME' indicator appears for about 0.5 seconds in the display window and then For your reference - Set the turn ote hour pressing PRESET (-/+). If the disc is inserted the audio CD Press SET to confirm the turn on hour time. on MP3 except the unit, the timer function plays to the DVD,VCD or TUNER. 13 Before Mini Glossary Operation for Audio Stream & Surround mode Sound Mode You DVD VCD CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital mark, you program source. If you play DVDs with can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and double-D symbol are trademarks of Dolby Laboratories. " " When DVD is inserted You the Digital pressing the AUDIO playback. button change can Audio on Output mode by the remote control during Each time you press SOUND button, the "BYPASS" indicator will only be shown on the display window. When Video CD is inserted BYPASS Outputs the sound from the front left and and subwoofer. right speakers Each time you press SOUND button, the sound mode of Video CD is changed on the display window as the following BYPASS → order. → STUDIO CHURCH → → CLUB → HALL → THEATER 1 BYPASS... ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, displayed Right on and Stereo of audio channel will be the TV screen. When CD is inserted Each time you press SOUND button, the sound mode of Audio CD is changed on the display window as the following BYPASS → order. → CHURCH STUDIO → → CLUB → HALL → THEATER 1 BYPASS... For your reference ? The unit memorizes the last mode each ? settings for individually. You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labelled with the logo. Dolby Surround encoded programs are labelled with the logo. source - - ote When you the output quency). 14 play sound tracks with 96kHz sampling frequency, signals will be converted to 48kHz (sampling fre- Before Operation 3 Caution: the remote control, press the DVD/CD button to select the device to be operated. Before using General This manual or (e.g., gives 2 setting of an item. be also be used for number). For some press SELECT/ENTER to execute the basic instructions for is not available playback on Temporary Title A-B functions, setting. Feedback Field Icons Repeat title Repeat sequence Resume Press / play from this point the disc. displayed on the TV changed on the menu. status can be can prohibited or not available be Notes Some discs may not provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. display operation Press DISPLAY during playback. to select an item. The selected item will be highlighted. Example: On-Screen Display during playing DVD Selection Method Items Function / Action using Title Number Shows the current title number and total number of titles / skips to the desired title number. / Numbers, or SELECT/ENTER Shows the current chapter number and total number of chapters / skips to the desired chapter number. / Numbers, or SELECT/ENTER Chapter 1/3 Number 1/12 Time search 0:20:09 Audio language and Digital Audio Output setting Display Some items On-screen 1 title can the Explanation On-Screen screen. change The number buttons Action General to or numbers operating the unit. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the unit Press Angle to select item Shows the elapsed playing time / searches by elapsed time. , , Numbers, SELECT/ENTER Shows the current audio soundtrack language, encoding method, and channel number / changes the mode Subtitle language / /or AUDIO setting. ABC 1 ENG 1/3 Sound Bypass /or Shows the current subtitle language / changes the set- SUBTITLE ting. Shows the current angle number and total number of angles / changes the angle. / Shows the current sound mode / changes the setting. /or SOUND Example: On-Screen Display during playing VCD Items Function / Action using Track Number Shows the current track number, total number of tracks and PBC On mode / skips to the desired track number. 1/3 Time 0:20:09 Audio Channel / to select item Shows the elapsed playing time. Shows the audio channel / changes the audio channel. Selection Method / , Numbers, or SELECT/ENTER / Numbers, or SELECT/ENTER , /or AUDIO Sound Bypass Shows the current sound mode / changes the setting. /or SOUND 15 PREATION Before Initial the Setup menu, you ments to items such as can make various and sound. You picture for the subtitles and the set a language among other things. To LANGUAGE Settings By using item, Operation see For details on can also menu, menu OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original and exit the Menu: Press SETUP to display the menu. SETUP will take you back to initial To go to the next level: on on A second press of screen. Move previous level: Select a language for the Setup menu 1 Operation The setup 2 press The audio), menu / Use screen / / Some items 16 option disc then display. as well as alternate setting for setting(s). to select the second desired the option to move to the third level. to select the desired require Press SETUP or setting then to confirm your selection. additional steps. PLAY to exit the setup DVD was language Refers to the original language (disc in which the recorded. Other: To select another language, press number but- will be shown the current 4 press SELECT/ENTER 5 on-screen you prefer for the audio track subtitles, and the disc menu. Original: to move to the second level. then press Use appears. to select the desired selected item, 3 Select the Press SETUP. Use and the remote control. Disc Audio / Subtitle / Menu General Select OSD the remote control. To go back to the Press adjust- pages 16 to 19. display Press Setup each Setup LANGUAGE menu. tons to enter the corresponding 4-digit number according to the language code list on page 32. If you enter the wrong language code, press CLEAR on the remote control. Before Operation DISPLAY Progressive Scan DVD DISPLAY TV 16:9 Aspect Display Mode Progressive Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Widescreen Scan Off To Turn ON Move TV Aspect a 16:9: Select when Component Input. 1. Select standard 4:3 TV is connected. a "Progressive Scan" then press 16:9 wide TV is connected. 2. Select "On" Mode Display Display Mode DVD setting works only when the TV Aspect menu using / the buttons. DISPLAY wide the upper and Panscan: Automatically displays the wide picture and cuts off the portions that do not fit. a picture with bands Displays lower portions screen the DISPLAY . TV the entire on 3. Press SELECT/ENTER to confirm your selection. The confirm menu will appear. mode is set to "4:3". Letterbox: scan: Connect component out of the DVD to the input of your monitor/television, set your television or monitor to Select DVD 4:3: Select when progressive of the on Display On Mode Progressive screen. Off Aspect Scan on Prev. Move Select 4. When the confirm menu appears on your screen Cancel is highlighted as default. Use the buttons to highlight "ENTER". 5. Pressing scan ENTER will set the player to / Progressive mode. Caution Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP (x) for five seconds then release it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. 17 PREATION Before Operation AUDIO OTHERS Each DVD disc has Set the variety of audio output options. player's AUDIO options according to the type audio system you a OTHERS of use. PBC On DivX(R) Registration Select AUDIO Dolby Digital Bitstream DTS Bitstream MPEG PCM Sample Freq. 48 kHz DRC On Vocal On PBC Move Dolby Digital / DTS / MPEG Set Select DVD Bitstream: Select "Bitstream" if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment PCM with a Dolby Digital or Select when connected to : Select Move MPEG decoder. a digiDolby Digital or amplifier. DVDs encoded in MPEG will be automatically downmixed Playback Control (PBC) to two-chan- to On or Off. On:Video CDs with PBC are played according Off:Video CDs with PBC are played the same to the PBC. way as Audio CDs. DivX(R) Registration two-channel tal stereo VCD You can DivX show the DivX DRM (Digital Right code for your unit Management) Registration only. nel PCM audio. Your Please Sample Freq. (Frequency) the DVD use DivX(R) this code to made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. Check the documentation for your Video On Demand service. amplifier To learn verify more its Display DVD the number which you ? With the DVD format, you can hear a program's sound track in the most accurate and realistic presentation digital a turn off your Do you want to technology. However, dynamic range of the ? This allows you to listen to a lower volume without losing clarity of sound. The rental has been use one Set Vocal to On only DVD is The karaoke channels mix into 18 playing. a when a of your 7 views Display now expired. This rental is ? different No Set DRC to On for this effect. Vocal a player. Yes quietest ones). movie at or stop playback, play the authorization expired. error. multi-channel Karaoke normal stereo sound. on the disc will This video player is not authorized to play this video. options watch the file. can This rental video has 7 views left. A view video, audio you may wish to compress the audio output (the difference between the loudest sounds and the go to www.divx.com/vod If you rent the DivX VOD file, it has several viewing limits as show below. ends when you thanks to Video On Demand format. an Notes ? Dynamic Range Control (DRC) DivX(R) encrypt movie file. without any to the purchase videos Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental capabilities. possible, register this player with The If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, signal through using XXXXXXXX : This will allow you to rent and If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is this unit passes each type of further processing. code is registration of Before LOCK Operation Password (Parental Control) You LOCK Rating Unlock Password **** Code Country 1 2 LK can control information certain scenes on that may not be suitable of these discs contain parental scenes Many that applies to the . 3 highlighted. Enter the new 4-digit code, then press SELECT/ENTER. Input it again to verify. 4 Press SETUP to exit the complete the disc. Movies and menu. Select DVD for children to view. change password. Select Password on the LOCK menu then press Follow step 2 as shown left (Rating). "Change" or If you Some movies contain enter or "New" is Move Rating (Security Code) disc scenes are or to rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. forget your Security Code If you forget your security code you the following steps: 1 Input the 6-digit number security code is and the 2 Enter a new code can "210499" on clear it using the setup menu cleared. described above. as ote The control feature allows you to block access below the rating you input, thereby preventing parental to scenes your children from being able to view material you believe is unsuitable. 1 Select "Rating" the LOCK on menu press STOP setup then press " appears on the TV screen, and then press SETUP to move to the INPUT PASSWD (x) menu. Country Code DVD . Enter the code of the To access the Rating, 2 Code features, you Password and must input code you created. If you have not yet entered a prompted to do so. the Country 4-digit security Input security code you are 4-digit code and press SELECT/ENTER. it again and press SELECT/ENTER to verify. make a mistake before pressing a Enter If you SELECT/ENTER, press CLEAR. 3 When " Select a rating from 1 to 8 using the Rating 1-8: Rating and rating eight (8) one (1) used to rate the DVD video disc, based in the reference chapter. (See page 33.) were 1 has the most restrictions is the least restrictive. press "Country Code" on the LOCK the list menu then . 2 3 Select the first character using Shift the button and select the as cursor shown left using 4 second character using 5 Unlock Select on Follow step 2 / buttons. whose standards country/area / (Rating). / buttons. buttons. Press SELECT/ENTER to confirm your country code selection. If you select unlock, parental control is not active and the disc plays in full. ote If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated not scenes are available on played unless an alternate scene is the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same Press SELECT/ENTER to confirm your 4 selection, then press SETUP rating to exit the menu. 19 PREATION Operation with RADIO Presetting the radio stations You 50 stations for FM and AM. can Before preset ume sure Press TUNER/BAND to show either FM or AM in the display window. Every time you press this button, AM and FM 1 2 3 otes Tuning Press the TUNING Scanning stops - Manual 3 4 for more than 0.5 second. when the unit tunes in a ?F station. (-/+) briefly and remote control) repeatedly. / (-/+) (or PRESET to select the on 6 Repeat steps the preset number you on ? are the front panel preset number will flash. To change the preset number, follow the steps 4-5. the remote preset numbers appears 20 or PRESET / until the desired preset number press the button repeatedly. control) effect, but again so that "ST" display window. There will the reception will improve. be no Press to restore the stereo effect. improve reception Reposition the supplied antennas. Use MODE/RIF (Radio Interference function to switch to Mono by reception Filter) if stereo recep- noise. weak AM broadcasts, if noises occurs, press MODE/RIF once. moment and then a or AUX). To While For your reference If all stations have already been entered, "MEM FULL" message will appear in the display window for a (-/+) ( in the tion is distorted cleared. Press and hold PRESET or to select another otes for about two seconds, "CLEAR ALL" appears in the display window and then press CLEAR on the front the stations or ? stereo 2 to 5 to store other stations. (TAPE, DVD/CD For your reference If a FM program is noisy Press MODE/RIF repeatedly MODE/RIF Press and hold PROGRAM/MEMORY To recall function mode again. To clear all memorized stations panel, or tuning, see "Manual Tuning". automatic tuning, see "Automatic Tuning". disappears Press PROGRAM/MEMORY The station is stored. non-preset radio stations Press POWER to turn off the unit want. 5 Adjust the volume by rotating VOLUME knob (or pressing VOLUME -/+ on the remote control) repeatedly. To turn the radio off Press PROGRAM/MEMORY on the front panel. A preset number will flash in the display window. Press PRESET remote For manual ? Tuning Press the TUNING / on the (-/+) (or PRESET control) repeatedly to select the preset Press PRESET To listen to (-/+) FM in the next preset station. Press TUNING (-/+) on the front panel until the frequency indication starts to change. Automatic or station you want. Each time you press this button, the unit tunes in changes alternately. 2 to the radio Press TUNER/BAND to select either AM the display window. The last received station is tuned in. 1 that you have turned the voldown to the minimum level. tuning, make Listening on recording with RADIO Operation RDS Function - Programme Search (PTY) OPTIONAL A About RDS equipped with RDS (Radio Data System), which brings a wide range of information from FM radio. RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musiThis unit is benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast. The following list major shows the abbreviations used to indicate each PTY along with an explanation of the PTY. cal selection and the correct time. RDS Tuning containg RDS data is tuned in, the unit will automatically display the station's call sign and the RDS indicator will light in the Display Window as well as indicators for the programme type recognition (PTY), Radio Text (RT), Clock Time (CT) and RDS services programme (PS) if transmitted by the station. When RDS FM station a Display Options The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that appears when a station is first tuned. In normal RDS operation the display will indicate the station name, broadcast network front or Pressing RDS on the cycle through the various call letters. enables you to data types in the sequence: panel FREQUENCY (PS PTY RT CT) PTY (Programme type recognition)- The programme type is shown on the display window. RT (Radio text recognition)- The radio station's name is displayed on the display window. CT (Time controlled by the channel)- Enable the unit to receive the actual time and show it on the dis- play window. PS (Programme Service name)- The programme title is displayed on the display window. You may search for a specific by following these steps: otes Some RDS stations may not choose to include some of these additional features. If the data required for the selected mode is not being transmitted, the show a PTY NONE, RT NONE, Display Window will CT NONE, PS NONE 1 Programme Type (PTY) Press TUNER/BAND to select FM mode. 2 Select a desired station by pressing TUNING (-/+). When the RDS transmission is received, the display shows the program service name (PS) after RDS indicator appears. 3 Press the RDS to select PTY mode. 4 To search for a different PTY, press the PRESET (-/+) while the last PTY in use is still displayed to scroll through the list of available PTY types. 5 When the PTY is selected, press the TUNING (-/+) within 5 seconds. The unit will go into an automatic search mode and attempt to find the next station with acceptable signal strength that matches the desired PTY type. message. 21 OPERATION with TAPE Operation Basic Playback Recording Press TAPE to select tape function. ("NO TAPE appears in the display 1 " cassette deck to the 2 Open 3 4 Insert a cassette with the tape side to the bottom and then close deck. by pushing PUSH EJECT position. Press B (or b : optional) remote control. on the front Press the function 1 window.) plays 2 You can panel pressing Pressing Once 4 Press zREC/[] control. The recording is by To stop the Press After the cassette This feature is To plays side, stops automatically. After the cassette of plays six times repeatedly front and stops automatically. reverse side, the front panel or z/[] remote begun. recording zREC/[]) during recording recording . STOP(x). CD- front and on To pause the Press z/[] ( or plays front or reverse (backward play) side, stops automatically. reverse Twice recording direction : OPTIONAL PLAY MODE repeatedly to set the recording 3 After the cassette - cas- Press zREC/[] on the front panel or z/[] on the remote control. "REC" flashes and holds the cassette in pause mode. Function Display the cassette deck and insert a blank sette into the cassette compartment. direction. or OPTIONAL select direction of the cassette you want PLAY MODE. AUX) or Open Press front side of cassette, the unit : (CD, TUNER/BAND To set the stops automatically. AUTO REVERSE DECK Auxiliary source or you want. AUTO STOP DECK After auto stop deck from Radio, CD Synchro recording a convenient to record tracks from CD to cassette. Select the CD function and load a CD to be recorded. You may wish to program a selection of tracks for 1 recording. 2 Stop Play the cassette deck and insert cassette into the tape tray. Open blank To set the STOP(x)/CLEAR on the front panel or TAPE STOP (x) on the remote control during playback. Press Press recording direction PLAY MODE repeatedly to a set the recording direction. Tape Counter Reset Press COUNTER RESET playback. Playing time To (COUNT.RESET) during appears "TAPE 0000 Play Rewind or " in display window. Fast Forward After press . bb/BB > on the front panel or bb/BB on the remote control during playback or stop, press want. 22 B (or b :optional) at the tape position you 3 Press CD SYNC. in stop mode. "REC" flashes and displays in the display window. 4 The " synchronized recording cally after about 7 seconds. " is started automati- otes If you wish to record from the desired track, select the desired track with ./> before commencing CD synchro recording. A function change is not possible during recording. Operation Playing a DVD and Video CD Playback Setup Turn on with DVD and Video CD DVD General Features ote VCD the TV and select the video input Unless stated otherwise, all operations described the remote control. Some features may also be source connected to the unit. available Audio system: Turn on the audio system and select the input source connected to the unit. Press OPEN/CLOSE 1 (Z) to open the disc Moving tray. When 2 3 Press OPEN/CLOSE (Z) to close the tray. READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY. In some cases, the disc menu might appear menu. to another TITLE disc has a then the more than one If The a menu screen or is loading a DVD / // buttons to select the you want to view, then press SELECT/ ENTER to start. Press TITLE or MENU to return to title/chapter the menu screen. VCD Use the number buttons to select the track you want to view and press RETURN to return to the menu screen. Menu settings and operating procedures may differ. Follow the instructions on the each menu screen. You also may set PBC to Off (See "PBC" on page play any stopped. can back is Moving When displayed may be displayed first after Video CD which offer a menu. Use the You DVD menu screen DVD appropriate 18). title, you (0-9) to can move is playback / or use stopped to move the by inputting its number while play- VCD a disc has title on a more disc has than chapter/track as Press . or one more than track, you one chapter can move or a to another follows: > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, / to select the chappress DISPLAY and press ter/track icon. Then, input the chapter/track number or use/. Search DVD 1 Press m or BB The Notes title to another CHAPTER/TRACK player 2 Press m parental control is set and the disc is not within rating settings you must input the password. (See "Lock Menu" on page 19.) number DVD to another title. instead. If Setup another title. Press DISPLAY while Load your chosen disc in the tray, with the playback side facing down. -- the on use will now or BB VCD during playback. go into SEARCH mode. repeatedly to select the required speed: mX2, mX4, mX8, mX16, mX100 (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). 3 To exit SEARCH mode, press PLAY. 23 OPERATION Operation General Features Still Picture and DVD Repeat (continued) To repeat Frame-by-frame playback VCD playback. The player on the remote control will now Slow Motion or by 3 the remote on T DVD VCD t 1/16 display required speed: t 1/2, [(backward) DVD only] or Slow motion playback in reverse is not applicable for Video CD. can DVD play a Press REPEAT VCD title/chapter/all/track during playback onds from left to on a disc. Playback - Repeat Track/All/Off playback will continue from the current point. repeats the current track repeats all the tracks on a disc. player Memory memorizes last scene from the last disc that remains in memory even if the disc from the player or switch off the is viewed. The last remove DVD scene If you load a disc that has the the scene is automatically recalled. player. scene memorized, : does not play repeatedly. ote --OnaVideoCDwithPBC,youmustsetPBCtoOffon the setup menu to use the repeat function (See "PBC" on page 18). 24 starts from the selected time on the disc. If you enter to select a desired you : seconds, press SELECT/ENTER to confirm invalid time, an Title: repeats the current title. Off : does not play repeatedly. - in the box. right If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. This Off elapsed playing time of the 2 Within 10 seconds, press / to select the Time Search icon in the on-screen display. Repeat Chapter/Title/Off Chapter: repeats the current chapter. Video CDs ? screen. current disc. Last Scene DVD Video Discs : on-screen the start time. repeat mode. All the The Time Search box shows the 4 Within 10 Repeat ? on appears The 3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and sec- ote Track during playback. at playing The "-:--:--" appears in the Time Search box. 3 To return to normal PLAY, press PLAY. ? VCD - (forward). ? DVD 1 Press DISPLAY during playback. or To cancel the sequence, press REPEAT A-B. The Time Search function allows you to start any chosen time on the disc. T1/2,T1/4,T1/8orT1/16 ? point. " Time Search T to select the or t 1/4, t 1/8 ? title: con- will enter SLOW mode. 2 Use the t You a again at your chosen end point. "A B" appears briefly on the TV screen, and the repeat sequence begins. 3 To exit still motion mode, press PLAY. player sequence in 2 Press REPEAT A-B during trol. The VCD - pressing PAUSE/STEP repeatedly 1 Press t a DVD - go into PAUSE mode. advance the picture frame-by-frame can A-B 1 Press REPEAT A-B at your chosen starting A appears briefly on the TV screen. " 1 Press PAUSE/STEP 2 You with DVD and Video CD ote This player does not memorize the you switch off the disc. player before scene of commencing a disc if to play the Operation General Features Zoom DVD with DVD and Video CD (continued) discs: Menus The Zoom function allows you to enlarge the video image and to move through the enlarged image. during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to four steps. 100% size (screen size→ 1600% size / 2Usethe zoomed fit mode) → 400% size 100% size → fit (screen //b u ttons to → 800% appropriate the picture. 1 Press TITLE. function may not work for DVDs. some 2 The menu can and subtitle DVD 3 To VCD You can start playback from a memorized nine points can be memorized. To enter a mark, follow these steps. 1 point. Up to a menu, the menu will appear on the Otherwise, the disc screen. Marker Search option. DVD Title Menu ote zoom an / // buttons to highlight your Or, use the selection, then press SELECT/ENTER. If the current title has The number button to select mode) through move DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the level magnification DVD the contents of DVD Video Checking VCD 1 Press ZOOM DVD Features Special remove list menu may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE again. DVD Disc Menu Press MENU. During disc playback, press MARKER when playback reaches the spot that you want to The disc menu is displayed. memorize. The Marker icon will appear 2 on the TV 1 to enter up to nine Marker Repeat step Camera briefly. screen points on a disc. To Recall 1 a playback, The MARKER SEARCH scenes will appear recorded at different to a different camera / 1 Press DISPLAY and then press the press SEARCH. menu If the disc contains angles, you can change during playback. Marked Scene disc During Angle DVD a on 2 Within 10 seconds, press / to select number that you want to recall. the a screen. angle to select angle. The number of the current window. Marker camera 2 Select desired a angle appears angle pressing the on the / display buttons. 3 Press SELECT/ENTER. will start from the Marked Playback Changing scene. 4 To remove the MARKER SEARCH menu, press SEARCH. 1 a During Press disc playback, / Changing press SEARCH. menu will appear on the screen. to select the Marker number that you Press CLEAR. The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 to hear a the Audio Channel VCD Press AUDIO different want to erase. 3 repeatedly during playback audio language or audio track. DVD Marked Scene The MARKER SEARCH 2 Language Press AUDIO different To clear the Audio repeatedly during playback to hear audio channel (Left, Right or Stereo). Subtitle a DVD Press SUBTITLE to see the (S-TITLE) repeatedly during playback different subtitle languages. To remove the MARKER SEARCH menu, press SEARCH. ote If appears, the feature is not available on the disc. 25 OPERATION Operation Playing Disc an with Audio CD and MP3/WMA Disc Audio CD and MP3/WMA CD MP3 MP3 / WMA disc limited WMA compatibility can MP3/WMA formatted play CD-ROM, CD-R, recordings on CD-RW discs. or player is follows: as within 32 48 kHz (MP3), Sampling frequency: within 24 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) ?T he player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which cre? The unit with this - - ? - - Audio CD Once you insert an audio CD a menu appears on the ? TV / to select a track then press PLAY or SELECT/ENTER and playback starts. screen. Press 0:00:00 1/12 Audio CD List Program ? Track1 ates an ISO 9660 file Track2 Track3 ? Track4 File names should have Track5 Track6 Track7 ? Track8 system. must incorporate They should not a maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? / Press to select a SELECT/ENTER to 2. see This DVD folder, and press the disc should be less to select a track then press PLAY or SELECT/ENTER. Playback starts. 0:00:00 1/104 MP3 / WMA List player requires discs and recordings to meet certain technical standards in order to achieve the folder contents. / Press on than 999. MP3 / WMA 1. The total number of files Program 1-Music1 optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. 2-Music2 3-Music3 Customers should note that 4-Music4 5-Music5 required 6-Music6 7-Music7 otes If you are in a file list on to return to the Folder on ? ? On the MP3/WMA list, use the menu / to and want highlight the stop mode and press SELECT/ENTER. Press MENU to move to the next page. CD with MP3/WMA file and JPEG file, you can switch MP3/WMA and JPEG menu. Press TITLE and a MP3/WMA or lighted. Then, JPEG word use / on top of the menu is high- to select MP3/WMA or JPEG then press SELECT/ENTER. 26 is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always ? permission be sought from the copyright owner. with Audio CD and MP3/WMA Disc Operation Pause CD MP3 1 Press PAUSE/STEP 2 To return to press PLAY or > In press CD MP3 WMA player to briefly CD or BB will now or BB MP3 WMA during playback. go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). Search speed and direction briefly during playback to go to the next track beginning of the current track. Press . twice track. or The 2 Press bb to another Track Press . 1 Press bb during playback. playback, PAUSE/STEP again. Moving Search WMA are indicated on required or the MX2, menu screen. or to return to the 3 To return to step back to the playback, press PLAY. previous of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) case during playback. Repeat 1 To Track/All/Off CD MP3 WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears on the menu screen. 2 To repeat all tracks on a disc, press REPEAT a second time. The Repeat icon and 3 To cancel The "ALL" appears Repeat mode, on the menu screen. press REPEAT Repeat icon and "OFF" appears on the a third time. menu screen. 27 OPERATION Operation Viewing This unit JPEG disc a play JPEG recordings, on right. can Insert with JPEG Disc Slide Show JPEG / // discs with JPEG files. Before Use read the notes then press SELECT/ENTER. on playing JPEG Recordings disc and close the tray. The JPEG menu appears on the TV Moving a screen. to highlight the (Slide Show) to another File Press . or > during viewing a picture or to the previous file. once advance to the next file to JPEG Still Picture Preview List JPEG Folder 1 1 Press PAUSE/STEP JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8 / to select a 2 SELECT/ENTER. folder, and press A list of files in the folder ? Tip list, are use " " the a file list and want to return to the Folder / buttons on the remote to highlight a particular file, press file and press PLAY. ? ? ? There to the next page. four Slide SELECT/ENTER. ? If you set active. 28 display Speed option to Off, Slide Show is The total number of files and folders not on the disc Some discs may be incompatible due to recording format or the condition of disc. a different Ensure that all the selected files have the copying into the ".jpg" CD layout. If the files have rename : Speed options: > (Slow), >> (Normal), >>> (Fast) and II (off). / // Use to highlight the Speed. Then, use / to select the option you want to use then press are upon the size and number of JPEG files, it could take a long time for the DVD player to read the disc's contents. If you don't see an on- Depending extensions when ? ? is limited player should be less than 999. a Tip move with this --- ? Press MENU to compatibility burn another disc. SELECT/ENTER or Slide Show starts from the selected file if Speed option is not Off. While viewing a file, you can press STOP(x) to move to the previous menu (JPEG menu). ? now after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2760 x 2048 pixels and menu screen. If you want to view / to highlight will follows: screen and press SELECT/ENTER to return to the previous 3 in player JPEG disc as appears. If you slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. The JPEG Folder 5 Press during them ".jpe" or ".jpeg" extensions, please as ".jpg" file. ".jpg" extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in Windows Explorer. File names without Programmed Playback CD The Program function enables you to store your favorite tracks Aprogram can contain 300 tracks (Audio CD/MP3/WMA). Insert 1 disc. a 0:00:00 MP3/WMA or menu 1/12 from any disc in the You appears Audio CD as List Program ? Music8 Track1 Track8 Track2 Track3 Music1 Music16 Track3 Track12 Music2 Music5 Track4 Track7 Music3 Music9 Track5 Track6 Music4 Music1 Track6 Track9 Music5 Music7 Track7 Track1 Music6 Music6 Track8 Track10 Music7 Music3 Audio CD Menu play a ? ? MP3/WMA Menu 2 3 a track playing a on a disc. disc. The repeat icon Off(No display): Erasing a 1 Use / does not Track from // a Program Program Program Or, select list. List to select the track that you wish " Press SELECT/ENTER to the play repeatedly. Repeat list. (Delete) icon then place the selected track on to erase additional tracks on the list. Press PROGRAM. " Or, select (Add)" icon then SELECT/ENTER to place the selected track on the Program list. Repeat to place additional tracks on the list. Erasing Select You can add all tracks in the disc. Select " Select the track you want to start Program list. (Add playing on Complete Program " List The ote The programs icon then press SELECT/ENTER. All)l" the (Del all)", then press SELECT/ENTER. complete Program for the disc is erased. ote 4 Tracks desired repeat mode. Track: repeats the current track All: repeats all the tracks on a disc. to erase from the the List. on memory. title/chapter/all/track 2 Press CLEAR. Select player appears. 2 Press REPEAT to select MP3 / WMA Program can 1 Press REPEAT when below. 1/104 0:00:00 List WMA Repeat Programmed Audio CD and MP3/WMA Discs: Audio CD MP3 the To resume Select also cleared when the disc is removed. are normal playback from programmed playback the List then press SELECT/ENTER. "PROG." disappears from the display window. a track on Tip Press MENU to move Press PLAY or to the next page. SELECT/ENTER to start. 5 Playback begins in the order in which you prothe tracks and "PROG." appears on the grammed display window. Playback stops after all of the tracks on the Program list have played once. 29 OPERATION Operation The unit with DivX Disc play the MPEG4 encoded files (.avi, mpg, etc) and subtitle files (.srt, .smi, sub). can .mpeg, .divx DivX disc 1 menu appears on the TV 720x576 screen. ? The file (W x is limited name H) pixel. of the DivX subtitle is available 20-40 characters 1/12 0:00:00 player ?A vailable resolution size of the DivX file is under tray. The DivX with this follows: as Insert the MPEG4 encoded disc and close the compatibility DIVX List ? file, it Movie Folder 3 from If there is Movie Folder 1 Movie Folder 2 (differs impossible code to may be displayed as " by language). express in the DivX mark on the dis" _ play. Movie Folder 4 Movie Folder 5 ? Movie Folder 6 Movie Folder 7 Movie Folder 8 ? If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. If the video and audio structure of recorded file is not interleaved, either video / Press to select a 2 SELECT/ENTER / 3 or folder, and press ? to see the folder contents. to select a track then press PLAY If the file is recorded with starts. Press PAUSE/STEP 2. To return to You can during playback. playback, press PLAY. Track/All/Off play a Playable playing a on a Playable disc. z ".avi ", disc. The repeat icon appears. 2 Press REPEAT to select ? ? (No display): Subtitle a does not play repeatedly. Playable - within 24 (S-TITLE) repeatedly during playback different subtitle language. DivX 1 Press bb or BB 2 Press bb or BB Bit ? during playback. repeatedly to select the required ? ? DivX ? 30 during playback. playback status can be displayed the TV - - - Be sure to select "SUBTITLE ON" mode before a DivX file by pressing SELECT/ENTER every time. When the subtitle has has more than two languages in the file, original subtitle is only available. Subtitle in Chinese will not be displayed during DivX file. on 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) playback 3 To exit SEARCH mode, press PLAY. Press DISPLAY (MP3), otes speed. screen. Audio format ? Search General format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz DivX 40 Display ".mpg ", ".mpeg " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Press SUBTITLE to see the DivX file Playable Codec desired repeat mode. Track: repeats the current track All: repeats all the tracks on a disc. Off DivX subtitle file z ".srt ", ".smi ", ".sub ". DivX title/chapter/all/track 1 Press REPEAT when ? 1-point MPEG4 encoders, like DivX or Xvid, have this option. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. 1. Repeat of GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some DivX Pause some unit supof the record level. GMC, the GMC? * SELECT/ENTER. Playback audio is out- putted. ports Press or (Subtitle in English is available.) play a Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the unit does not work. ? No disc is inserted. ? No ? picture. The TV is not set to receive DVD signal out- ? put. ? The video cable is not connected securely. ? Plug the power cord into the wall outlet securely. Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cable into the jacks securely. ?T he connected TV power is turned off. There is no sound or only a very low-level sound is heard. ? ? The equipment connected with the audio cable is not set to receive DVD signal output. The audio cables not connected are securely ?T ? ? The playback picture is poor. The unit does not start The power of the equipment connected with the audio cable is turned off. ? The audio ? The disc is ? connecting cord is damaged. ? Replace it with new one. Clean the disc. No disc is inserted. ? Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) An ? Insert a playable disc. (Check the disc type, color system and Regional code.) unplayable The disc is The disc is ?Amenu is disc is inserted. placed upside ?T he disc is not ? so Connect the audio cable into the jacks ? playback. ? Select the correct input mode of the audio you can listen to the sound from the unit. ?T urn on the equipment connected with the audio cable. ? dirty. the TV. securely. . ? urn on within the placed guide. ? ? dirty. on the TV Place the disc with the ? down. Place the disc on the disc tray inside the guide. correctly Clean the disc. Press the SET-UP button to turn off the ? screen. playback side down. menu screen. Severe hum heard. or noise is ? The ? The ? The disc is ? ? Rating level is plugs and ? set. jacks are Cancel the Rating function ing level. ?W ipe them with with alcohol. dirty. ? dirty. The speakers and components connected poorly. ? are a cloth or change the rat- slightly moistened Clean the disc. Connect the speakers and components securely. The unit is located with too close to the TV. ? Move your TV away from the audio components. Radio stations cannot be tuned in. ? The antenna is positioned or connected poorly. ? ? Connect the antenna securely. Adjust the antennas and connect an external antenna if necessary. ? ? The signal strength of the stations is too weak (when tuning in with automatic tuning). No stations have been preset or preset stations have been cleared (when tuning by ?T ? une in the station manually. Preset the stations. scanning preset stations). The remote control does not work properly. ?T he remote control is not pointed at the remote sensor of the unit. ? ? ? ?P oint the remote control at the remote of the unit. the remote control within about 23 ft The remote control is too far from the unit. ? Operate (7 m). There is an obstacle in the path of the remote control and the unit. ? Remove the obstacle. The batteries in the remote control exhausted. ? Replace the batteries are sensor with new ones. 31 REF NC Language Enter the appropriate (See page 16). Code List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 32 Country Enter the appropriate Code List code number for the initial setting "Country Code" (See page 19). Code Country Code Country Code Country Code Country AD Andorra ER Eritrea LC Saint Lucia SC Seychelles AE United Arab Emirates ES LI Liechtenstein SD Sudan AF Afghanistan ET Spain Ethiopia LK Sri Lanka SE Sweden AG FI Finland LR Liberia SG Singapore AI Antigua and Barbuda Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE Georgia MK Macedonia ST Saint Tome and AZ GF French ML Mali SU Former USSR BA Azerbaidjan Bosnia-Herzegovina GH Ghana MM Myanmar SV El Salvador BB Barbados GI Gibraltar MN Mongolia SY Syria BD GL Greenland MO Macau SZ Swaziland BE Bangladesh Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP Guadeloupe (French) MR Mauritania TF French Southern BH Bahrain GQ Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia BS Bahamas GY MZ Mozambique TO Tonga BT Bhutan HK Guyana Hong Kong NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG TW Taiwan CA Canada HT Haiti NI Nigeria Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine ID Indonesia NO IE Ireland NP Norway Nepal UG CG (Keeling) Islands Central African Republic Congo UK Uganda United Kingdom CH Switzerland IL Israel NR Nauru UM USA Minor CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile OM Oman UY Uruguay CM Cameroon IQ Territory Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF Polynesia (French) VC Saint Vincent & CR Costa Rica IT Italy PG CS Former Czechoslovakia JM Jamaica PH Papua New Guinea Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP PL Poland VI CX Christmas Island KE Japan Kenya Virgin Islands (British) Virgin Islands (USA) PM Saint Pierre and VN Vietnam CY Cyprus KG Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands DE KI Kiribati PT Portugal WS Samoa DJ Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT Mayotte DM Dominica KP North Korea QA Qatar YU Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands CF Republic Republic (European Guyana Georgia & S. Sandwich (USA) Anguilla Mayen Islands Republic Principe Territories (French) Tobago Outlying Islands Miquelon (French) City State Grenadines 33 REF NC Specifications General Section Power Power Refer to the main label. supply consumption 140W Mass 7.6kg External dimensions Tuner/Amplifier FM AM (W x H x D) 170 Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response 100 Power 300 mm 108.0 MHz - or 65 -74 MHz, 87.5 -108.0 MHz 10.7 MHz 60/55 dB 60 - (Mono/Stereo) 10000 Hz 522-1611kHzor530-1610kHzor530-1720kHz 450 kHz 35 dB 2000 Hz - Speaker:30W+30W(6Ω/2chTHD10%) Subwoofer: 60W (6Ω, THD 10 %) T.H.D 0.15% Frequency Response Signal-to-noise ratio 40 Cassette tape DVD/VCD/CD x Section 87.5 Output 340 x - 20000 Hz 80 dB player/DVD/VCD/CD player Section player 18000 Hz Frequency response (audio) Signal-to-noise ratio (audio) Signal-to-noise ratio (video) Dynamic range (audio) 40 Video output (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Video output Cassette tape More than 70 dB More than 60 dB More than 70 dB player Tape Speed 3kHz±3% Wow Flutter 0.25% (MTT -111, JIS-WTD) 120sec (C-60) F.F/REW. Time 125 Frequency Response Signal to Noise Ratio Channel Separation 8000Hz Section Speaker Name Type Impedance Frequency Response 2 Input Power Max. Input Power Net Dimensions (W Net Weight 80 - H x D) Subwoofer 1 Way 1 Speaker 6Ω 20000 Hz 85 dB/W Rated x Speaker (L/R) Way 2 Speaker 6Ω Sound Pressure Level 34 - 43dB(P/B)/43dB(R/B) 50dB(P/B)/45dB(R/P) 55dB (MTT-5511) Erase Ratio Speaker (1 kHz) (1 kHz) 1.0 V S-video output Component - (1m) 55-1500Hz 82 dB/W 30W 60W 60W 120 W 200X340X208mm 2.9 kg (1m) 170X335X263mm 3.3 kg x 1 P/NO : 3834RH0078N
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project