LG | NB5540 | LG NB5540 Owner’s Manual

ENGLISH
OWNER’S MANUAL
4.1 ch Hi-Fi
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
NB5540 (NB5540, S54A1-D)
NB4540 (NB4540, S44A1-D)
www.lg.com
NB5540-NE.DSGPLLF_ENG.indd 1
2014-07-10
10:57:08
NB5540-NE.DSGPLLF_ENG.indd 2
2014-07-10
10:57:08
1
Getting Started
Getting Started
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
NOTICE: For Product Identification and
Compliance/Safety labeling information please
refer to Main Label on the bottom of Unit.
NB5540-NE.DSGPLLF_ENG.indd 3
2014-07-10
10:57:08
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery from the
equipment: Remove the old battery or battery
pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to
human and animal health, the old battery or
the battery put it in the appropriate container
at designated collection points. Do not dispose
of batteries or battery together with other
waste. It is recommended that you use local,
free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, fire or the like.
NB5540-NE.DSGPLLF_ENG.indd 4
2014-07-10
10:57:09
Table of Contents
Table of Contents
1
Getting Started
3
Safety Information
6
Unique features
6Introduction
6
– Symbols used in this manual
6Accessories
7
Remote control
8
Front panel
8
Rear panel
9
Installing the sound bar
10 Mounting the main unit on a wall
2Connecting
12
12
13
13
14
14
15
15
16
16
16
17
18
18
18
18
19
Connecting the AC adapter
Wireless subwoofer connection
Connecting to your TV
– Using an OPTICAL cable
– Using an HDMI cable
– Enjoy rich sound broadcast of the
channel with the sound bar
– What is SIMPLINK?
– ARC (Audio Return Channel) function
– Additional information for HDMI
Optional equipment connection
– HDMI connection
– PORT. (Portable) IN connection
– OPTICAL IN connection
– USB connection
– Compatible USB devices
– USB device requirement
– Playable file
21
22
22
23
25
25
26
26
27
28
28
28
28
29
29
5
– Sleep timer setting
– AUTO POWER On/Off
– Auto function change
– LG Sound Sync
Using Bluetooth technology
– Listening to music stored on the
Bluetooth devices
Using Bluetooth App
– Install “LG Bluetooth Remote” App
onto Your Bluetooth Device
– Activate Bluetooth with “LG Bluetooth
Remote” App
Sound adjustment
– Setting sound effect
– Adjust volume level automatically
– Adjust the woofer level settings
Controlling a TV with the supplied remote
control
– Setting up the remote to control your
TV
1
2
3
4
4Troubleshooting
5
30Troubleshooting
5Appendix
32 Trademarks and licenses
33Specifications
35Maintenance
35 – Handling the unit
3Operating
20
20
21
21
21
21
21
Basic operations
– USB operation
Other operations
– DRC (Dynamic Range Control)
– AV Sync
– Turn off the sound temporarily
– Displaying file and input source
NB5540-NE.DSGPLLF_ENG.indd 5
2014-07-10
10:57:09
6
Getting Started
Unique features
1
Auto power down
Getting Started
This unit will turn off by itself for energy saving
consumption.
Accessories
Please check and identify the supplied accessories.
Designs and specifications of the accessories are
subject to change without prior notice.
Portable In
Listen to music from your portable device. (MP3,
Notebook, etc)
Remote control (1)
Batteries (2)
AC adapter (1)
Power cord (1)
Optical cable (1)
USB gender changer
(1)
Speaker (easy) setup
Listen to sound from TV, DVD or Digital device with
vivid 4.1 ch mode.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Introduction
Symbols used in this manual
,,Note
Indicates special notes and operating features.
>>Caution
Wall bracket (2)
Wall bracket install
guide (1)
Screws (2)
Cable ties for arranging
cables (2)
Indicates cautions for preventing possible damages
from abuse.
NB5540-NE.DSGPLLF_ENG.indd 6
2014-07-10
10:57:13
Getting Started
Remote control
7
• • • • • • • • • • a • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
FUNCTION : Selects the function and the input
source.
OPTICAL : Changes input source to OPTICAL
directly.
MUTE i : Mutes the sound.
VOL o/p : Adjusts speaker volume.
• • • • • • • • • • b • • • • • • • • • •
1
Getting Started
FOLDER W/S : Searches a folder on USB device.
AUTO POWER : Turns on or off AUTO POWER
function. (Refer to the page 22.)
AV SYNC : Synchronizes the audio and video.
INFO : Displays the information of a file or an input
source.
REPEAT : Listen to your files repeatedly or
randomly.
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a file.
Z (Stop) : Stops playback.
d/M (Play/Pause) : Starts playback. / Pauses
playback.
SOUND EFFECT : Selects a sound effect mode.
AUTO VOLUME : Turns on and off the AUTO
VOLUME mode.
WOOFER LEVEL : Sets the sound level of woofer.
• • • • • • • • • • c • • • • • • • • • •
0 to 9 numerical buttons : Selects a file directly.
DRC : Turns on or off DRC function.
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA)
batteries with and matched correctly.
NB5540-NE.DSGPLLF_ENG.indd 7
SLEEP : Sets the system to turn off automatically at
a specified time.
• • • • • • • • • • d • • • • • • • • • •
TV Control buttons : See page 29.
2014-07-10
10:57:14
8
Getting Started
Front panel
1
Getting Started
ADisplay window
BRemote sensor
Standby LED
It lights up in red on standby mode.
CF (Function)
Selects the function and input source.
Dp/o (Volume)
Adjusts volume level.
E1/! (Standby/On)
Rear panel
ADC. IN 25 V 0 2 A
DOPT. IN : Optical input
BHDMI IN / OUT : HDMI input / output
EPORT. IN : Portable input
CUSB port
NB5540-NE.DSGPLLF_ENG.indd 8
2014-07-10
10:57:15
Getting Started
9
Installing the sound
bar
1
Getting Started
You can hear the sound by connecting the unit to
the other device : TV, Blu-ray disc player, DVD player,
etc.
Place the unit in front of the TV and connect it to
the device you want. (Refer to pp. 13 - 18.)
>>Caution
For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
NB5540-NE.DSGPLLF_ENG.indd 9
2014-07-10
10:57:16
10
Getting Started
Mounting the main
unit on a wall
1
1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach
to the position.
TV
You can mount the main unit on a wall.
Getting Started
Preparation materials
Unit
Wall bracket install guide
Wall bracket
Screws
2. When you mount it on a wall (concrete), use the
wall plugs. You should drill some holes. A guide
sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.
(Not supplied)
Screws (A)
Wall plug
,,Note
You should connect the supplied USB gender
changer in advance of mounting the unit on
the wall for using a USB connection.
3. Remove the Wall bracket install guide.
NB5540-NE.DSGPLLF_ENG.indd 10
2014-07-10
10:57:17
Getting Started
4. Fix the brackets with screws (A) as shown in the
illustration below.
11
6. Fix the unit with the screws firmly.
1
,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
5. Put the unit on the brackets to match screw
holes on the bottom of the unit.
Getting Started
,,Note
To detach the unit, perform it in reverse order.
>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
NB5540-NE.DSGPLLF_ENG.indd 11
2014-07-10
10:57:19
12
Connecting
Connecting the AC
adapter
Wireless subwoofer
connection
1. Connect the supplied AC power cord to the AC
adapter.
LED indicator of wireless subwoofer
2. Connect the AC adapter cable to DC. IN adapter
input.
2
3. Plug the AC power cord into an AC outlet.
Connecting
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
LED Color
Status
Yellow-green
(Blink)
The connection is trying.
Yellow-green
The connection is completed.
Red
The wireless subwoofer is
in standby mode or the
connection is failed.
Off (No
display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED or the blinking of yellow-green LED
on the wireless subwoofer and the subwoofer does
not make sound. To solve the problem, follow the
below steps.
1. Adjust volume level of the main unit to
minimum.
-- ”VOL MIN” appears on the display window.
2. Press and hold MUTEi(Mute) on the remote
control for about 3 seconds.
-- “W RESET” appears on the display window
briefly.
NB5540-NE.DSGPLLF_ENG.indd 12
2014-07-10
10:57:19
Connecting
13
3. If the LED of the wireless subwoofer already
blinks in yellow-green continually, you can skip
this step.
Connecting to your TV
Press and hold PAIRING on the back of the
wireless subwoofer for more than 5 seconds.
Please connect with this unit and TV using the
optical digital cable or HDMI cable considering the
state of the TV.
-- The LED of the wireless subwoofer lights up
alternately in red and yellow-green.
4. Disconnect the power cord of the main unit
and the wireless subwoofer.
1. Connect the OPT. IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
The main unit and the wireless subwoofer will
be paired automatically when you turn on the
main unit.
-- When the connection is completed, you can
see the yellow-green LED on the subwoofer.
2
Connecting
5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned
off.
Using an OPTICAL cable
Optical
cable
,,Note
yy It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
yy The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer
as close as possible (within 5 m) and avoid
the cases below.
-- There is a obstacle between the main
unit and the subwoofer.
-- There is a device using same frequency
with this wireless connection such as a
medical equipment, a microwave or a
wireless LAN device.
2. Set the INPUT source to OPTICAL. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
,,Note
yy You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
NB5540-NE.DSGPLLF_ENG.indd 13
2014-07-10
10:57:20
14
Connecting
Using an HDMI cable
HDMI cable Checklist
If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can
enjoy the TV audio through the speakers of this unit
without connecting the optical cable.
Some HDMI cables do not support the ARC
function, this can result in no sound output.
2
When connecting this unit to the TV, if there is no
sound, there might be a problem with the HDMI
cable. Therefore connect this unit to the TV and
check whether the Type A, High speed HDMI™
Cable with Ether net.
(X)
STANDARD HDMI CABLE WITH ETHERNET
Connecting
HDMI
cable
(X)
HIGH SPEED HDMI CABLE
(O)
HIGH SPEED HDMI CABLE WITH ETHERNET
,,Note
yy HDMI CEC (Consumer Electronics Control):
Using a single remote control, you have the
ability to operate CEC compatible devices
(TV, Sound Bar, Blue-ray player, etc.)
yy You can also enjoy extra functions such as
USB / Bluetooth with FUNCTION on remote
control or F on this unit. When you go back
to live TV channel after using the extra
functions (USB / Bluetooth) of this audio
system, you should choose your preferred
speaker on TV to enjoy the sound from this
audio system again.
Enjoy rich sound broadcast of
the channel with the sound
bar
Connection through HDMI Cable
Your television must support the newest HDMI
features (HDMI CEC1) / ARC (Audio Return Channel))
to fully enjoy the Live broadcasting channel with
audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system
should be connected through an OPTICAL cable.
1) HDMI CEC (High-Definition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI
feature designed to allow the user to command
and control the CEC-enabled devices, that are
connected through HDMI by using only one of
their remote controls.
※ Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync (Sony), EasyLink (Philips),
etc.
NB5540-NE.DSGPLLF_ENG.indd 14
2014-07-10
10:57:21
Connecting
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control :
Power on/off, volume up/down, etc.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
yy Depending on the state of the unit, some
SIMPLINK operation may differ from your
purpose or not work.
yy Depending on a TV or a player which
is connected with this unit, SIMPLINK
operation may differ from your purpose.
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of the unit.
To use this function :
-- Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.
-- The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about
ARC function, refer to your TV manual.
-- You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
-- You must connect the HDMI OUT on the unit
with HDMI IN of the TV that supports ARC
function using an HDMI cable.
2
Connecting
Refer to the TV owner’s manual for the details of
SIMPLINK function.
15
-- You can connect only one Sound bar to TV
compatible with ARC.
,,Note
yy ARC function is automatically selected when
ARC signal comes in from TV, no matter
what kind of the function you are using.
yy You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (HDMI ARC)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
NB5540-NE.DSGPLLF_ENG.indd 15
2014-07-10
10:57:21
16
Connecting
Additional information for
HDMI
yy When you connect an HDMI or DVI compatible
device make sure of the following:
2
Optional equipment
connection
Connecting
-Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
HDMI connection
-The connected device’s video input is set
correctly for this unit.
You can enjoy the sound from the external device
you connect.
For enjoying sound only
-The connected device is compatible with
720 x 576p, 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-The picture will not be displayed properly with
non-HDCP device.
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).
To the Blu-ray disc player,
DVD player, etc.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc.
2. Set the INPUT source to HDMI IN. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
yy You cannot change the video resolution
in the HDMI IN mode. Change the video
resolution of the connected component.
yy If the video output signal is abnormal when
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.
NB5540-NE.DSGPLLF_ENG.indd 16
2014-07-10
10:57:22
Connecting
For enjoying both sound and picture
You can enjoy both sound and picture from the
external device you connect.
17
PORT. (Portable) IN
connection
2
Connecting
MP3 player,
etc...
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable players or external devices.
1. Connect the portable player to the
PORT. (Portable) IN connector of the unit.
2. Turn the power on by pressing 1 (Power).
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the external device such as
Blu-ray disc player, DVD player, etc.
2. Connect HDMI OUT jack on the back of the unit
to HDMI IN jack on the TV.
3. Select the PORTABLE function by pressing
FUNCTION on the remote control or F on the
unit until the function is selected.
4. Turn on the portable player or external device
and start playing it.
3. Set the INPUT source to HDMI IN. Press
repeatedly FUNCTION on the remote control or
F on the unit until the function is selected.
,,Note
yy With the unit connected to external devices
and TV as above illustration, TV will output
picture and sound from external devices
when the unit is turned off in HDMI IN
mode.
yy HDMI OUT jack is for TV connection. Even
though PCM multi channel is inputted to
the unit through an HDMI cable, the unit
can only output 2 channel to TV.
yy Audio sources without any transformation
pass through this unit when this unit is
turned off.
NB5540-NE.DSGPLLF_ENG.indd 17
2014-07-10
10:57:23
18
Connecting
OPTICAL IN connection
Connect an optical output jack of external devices
to the OPT. IN jack.
Connect a USB to the USB gender changer when
the unit is mounted on the wall.
2
Connecting
To the optical output jack of
external device
Speaker (easy) setup
For more information of playing files on a USB, refer
to the page 20.
Listens to sound from TV, DVD or Digital Device
with 4.1 or 4 ch mode.
Removing the USB Device from the unit.
1. Connect the OPT. IN jack on the back of the unit
to optical out jack of your TV (or digital device
etc.)
2. Select the input source to OPTICAL by pressing
FUNCTION on the remote control or F on the
unit until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
3. Listen to sound with 4.1 or 4 ch speaker.
4.Press OPTICAL to exit from OPTICAL.
Function is retuned to previous one.
USB connection
Connect USB memory device to the USB port on
the back of the unit.
1. Choose a different function/mode or press
Z twice in a row.
2. Remove the USB device from the unit.
Compatible USB devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive : Devices that support USB 1.1.
yy The USB function of this unit does not support
some USB devices.
USB device requirement
yy Devices which require additional program
installation connected to a computer, are not
supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than
a few minutes to be searched.
yy To prevent data loss, back up all data.
yy This unit is not supported when the total
number of files is 1000 or more.
yy The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
yy The exFAT file system is not supported on this
unit. (FAT16/FAT32/NTFS systems are available.)
NB5540-NE.DSGPLLF_ENG.indd 18
2014-07-10
10:57:24
Connecting
yy Depending on some devices, it may not available
to recognize the followings on this unit.
-- External HDD
,,Note
yy Folders and files on the USB are recognized
as below.
-- Card readers
-- Locked devices
: Folder
*ROOT
: File
-- Hard type USB devices
-- USB hub
a
-- Using USB extension cable
Connecting
b
Playable file
within 32 to 48 kHz
within 32 to 48 kHz
within 32 to 48 kHz
within 32 to 192 kHz
within 32 to 48 kHz
2
E
-- Android device
MP3 :
WMA :
OGG :
FLAC :
WAV :
C
D
-- iPhone/iPod/iPad
Sampling Frequency
19
F
G
c
H
I
A
d
J
B
Bitrate
MP3 :
WMA :
OGG :
FLAC :
WAV :
within 80 to 320 kbps
within 56 to 128 kbps
within 50 to 500 kbps
within 500 to 5000 kbps
within 500 to 5000 kbps
yy Maximum files : Under 999
yy A protected file by DRM (Digital rights
management) cannot be played on the unit.
yy Video files in the USB storage device can not be
played.
yy Depending on the performance of your USB
device, playback may not work well.
NB5540-NE.DSGPLLF_ENG.indd 19
yy If there is no file in a folder, the folder will
not appear.
yy File will be played from file $A to file $J
one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
depending on the record circumstances.
yy This unit can display file or folder names
that contain numbers or English characters
only.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
2014-07-10
10:57:25
20 Operating
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION
on the remote control or F on the unit until the
function is selected.
To
Stop
Playback
3
Pause
Do this
Press Z.
,,Note
yy The resume point may be cleared when you
pull out the power cord or removing the
USB device from the unit.
yy Repeat/Random playback operates as
follows.
On Display
OFF
RPT1
Plays a same song
repeatedly.
Press d/M.
During playback, press d/M.
Operating
During playback, press V
on the remote control to go
to the next file.
Playing less than 2 seconds,
press C on the remote
Skip to the next/
control to go to the previous
previous file
file.
Playing after 3 seconds, press
C on the remote control
to go to the beginning of
the file.
Search for a
section within a
file
Press and hold C/V
during playback and release it
at the point you want to listen
to. (except FLAC and OGG
files)
Play repeatedly
or randomly
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, OFF RPT 1
RPT DIR (DIRECTORY) RPT
ALL RANDOM.
Select a file
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired file directly.
Search a folder
Press FOLDER W/S on the
remote control.
Resume
playback
This unit memorizes a current
song which is played before
changing the function or
turning off the unit.
NB5540-NE.DSGPLLF_ENG.indd 20
Description
Plays songs on USB
device in order.
RPT DIR
Plays songs in a folder
repeatedly.
RPT ALL
Plays all the songs on
USB device repeatedly.
RANDOM
Plays songs randomly.
2014-07-10
10:57:25
Operating
Other operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1.Press AV SYNC.
,,Note
This function does not operate on USB
function.
Turn off the sound temporarily
Press MUTEi to mute your unit.
You can mute your unit, for example, to answer
the telephone, “MUTE” is displayed in the display
window.
To cancel it, press MUTEi again on the remote
control or change the volume level.
Displaying file and input
source
You can display various information of the input
source by pressing INFO.
USB : File information contained on a USB (MP3/
WMA/OGG/FLAC/WAV)
OPTICAL/ARC/HDMI IN : Audio format, Audio
channel
Sleep timer setting
Press SLEEP repeatedly to select the desired time
period options (in minutes):
DISPLAY OFF (display window will turns off ) ->
DIMMER (display window will be darkened by half )
-> Sleep timer value -> Display on
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “10MIN” appears, and then press
SLEEP once again while “10MIN” is displayed.
3
Operating
2.Use C/V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
21
,,Note
You can check the remaining time before the
unit turns off . Press SLEEP the remaining time
appears in the display window.
Auto power down
This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.
NB5540-NE.DSGPLLF_ENG.indd 21
2014-07-10
10:57:25
22 Operating
AUTO POWER On/Off
Auto function change
This unit automatically turns on by an input source :
Optical, LG TV or Bluetooth.
This unit recognizes input signals such as optical,
Bluetooth and LG TV and then changes suitable
function automatically.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the
input signal and select the suitable function. You
can hear the sound from your device.
If you try to connect your Bluetooth device, this unit
turns on and ready to pair. Connect your Bluetooth
device and play your music.
This function turns on or off each time you press
AUTO POWER.
3
,,Note
Operating
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Optical/Wireless).
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
When optical signal comes in
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from
your device.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV signal comes in
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG
TV. You can hear the sound from your TV.
When connecting "LG Bluetooth
Remote" app
When you connect your Bluetooth device by using
"LG Bluetooth Remote" app, this unit keeps the
current function as well as you can control the unit
by the app.
yy If you disconnect Bluetooth connection
by this unit, some Bluetooth devices try to
connect to the unit continually. Therefore
it is recommended to disconnect the
connection before turn off the unit.
yy If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
NB5540-NE.DSGPLLF_ENG.indd 22
2014-07-10
10:57:25
Operating 23
,,Note
yy To change to optical function, it needs 5
seconds of no signal.
yy If you are using LG TV function, this unit
does not react to the Bluetooth connection.
yy If you are using Bluetooth function, this unit
does not react to LG TV connection.
yy This unit does not change the function to
optical if SIMPLINK of the connected TV is
set to on.
yy If you want to use the auto function change,
SIMPLINK must be turned off. It takes for
about 30 seconds to turn off SIMPLINK.
yy If you disconnect Bluetooth connection
by this unit, some Bluetooth devices try to
connect to the unit continually. Therefore
it is recommended to disconnect the
connection before changing the function.
yy If you connect Bluetooth device by "LG
Bluetooth Remote" app when this unit is
ready to pair with LG TV, the unit change the
function to Bluetooth.
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
3
Operating
yy Auto function change does not operate if
your Bluetooth device or LG TV has never
been paired with this unit.
LG Sound Sync
yy When the connection fails, make sure of the
condition of the TV and power.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- turn off the unit.
-- Changing the function to the others.
-- Disconnecting the optical cable.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV when you
set AUTO POWER function to ON.
NB5540-NE.DSGPLLF_ENG.indd 23
2014-07-10
10:57:26
24 Operating
With wired connection
With wireless connection
1. Connect your LG TV to the unit by using an
optical cable.
1. Turn on the unit by pressing 1 (Power) on the
remote control.
2. Select LG TV function by using FUNCTION on
the remote control or F on the unit until the
function is selected.
Optical
cable
3
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
"PAIRED" appears on the display window for
about 3 seconds and then you can see "LG TV"
on the display window if connecting normally
between this unit and your TV.
Operating
,,Note
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
yy If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
3. Turn on the unit by pressing 1 (Power) on the
remote control.
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
4. Select OPTICAL function by using FUNCTION
on the remote control or F on the unit until the
function is selected.
yy The device with Bluetooth® wireless
technology will be disconnected, if Sound
Sync function is selected. “LG Bluetooth
Remote” app you’ve already connected is
disconnected either.
You can see "LG OPT" on the display window
if connecting normally between this unit and
your TV.
NB5540-NE.DSGPLLF_ENG.indd 24
2014-07-10
10:57:26
Operating 25
Using Bluetooth
technology
About Bluetooth
Bluetooth is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
Bluetooth Profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
Pairing your unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using
FUNCTION on the remote control or F on the
unit until the function is selected.
Appears “BT” and then “READY” in display
window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG SOUND BAR
(XX:XX)”.
3
Operating
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Listening to music stored on
the Bluetooth devices
,,Note
A2DP (Advanced Audio Distribution Profile)
yy XX:XX means the last four digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG
SOUND BAR (F7:08)” on your Bluetooth
device.
yy Depending on the Bluetooth device
type, some device have a different
pairing way. Enter the PIN code (0000) as
needed.
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” will appear on
the display window.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
NB5540-NE.DSGPLLF_ENG.indd 25
2014-07-10
10:57:26
26 Operating
,,Note
yy When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the bluetooth device.
-- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
3
yy This unit supports Bluetooth auto pairing.
However it does not operate in the case
below :
Operating
-- When you restart this unit.
-- When you return to Bluetooth function
after using LG TV function.
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
Using Bluetooth App
,,Note
Only Android OS is available to use “LG
Bluetooth Remote” app with this unit.
About “LG Bluetooth Remote” App
“LG Bluetooth Remote” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.
Install “LG Bluetooth Remote”
App onto Your Bluetooth
Device
There are two ways to install“LG Bluetooth
Remote”App onto Your Bluetooth Device.
Install “LG Bluetooth Remote” App
through QR code
1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy The more distance between the unit and
the bluetooth device, the lower the sound
quality becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the bluetooth
device gets far from the unit.
yy When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
yy When not connected the Bluetooth, “READY”
appears on the display window.
NB5540-NE.DSGPLLF_ENG.indd 26
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
2014-07-10
10:57:26
Operating 27
Install “LG Bluetooth Remote” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Activate Bluetooth with “LG
Bluetooth Remote” App
“LG Bluetooth Remote” app helps to connect your
bluetooth device to this unit.
1. Tap “LG Bluetooth Remote” app icon on the
home screen to open “LG Bluetooth Remote”
app, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
-- Android O/S : Ver 2.3.3 (or later)
yy This unit does not support the multi-pairing.
If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.
yy If you use “LG Bluetooth Remote” app for
operation, there would be some differences
between “LG Bluetooth Remote” app and the
supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
yy After connection of “LG Bluetooth Remote”
app, music may be output from your device.
In this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “LG Bluetooth Remote”
app, “LG Bluetooth Remote” app may
operate abnormally.
3
Operating
yy Make sure that your Bluetooth device is
connected to the Internet.
,,Note
yy “LG Bluetooth Remote” app will be available
in the software version as follow;
yy When “LG Bluetooth Remote” app operate
abnormally, check your Bluetooth device
and the connection of “LG Bluetooth
Remote” app and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “LG
Bluetooth Remote” operation.
yy If you select Bluetooth function after
“LG Bluetooth Remote” app has been
disconnected, this unit and your Bluetooth
device will be paired automatically but you
cannot control this unit by “LG Bluetooth
Remote” app. To use “LG Bluetooth Remote”
app, reconnect the app.
yy Even though Bluetooth connection will be
disconnected, you can use “LG Bluetooth
Remote” app when you change the function
to the others except LG TV function.
NB5540-NE.DSGPLLF_ENG.indd 27
2014-07-10
10:57:26
28 Operating
Sound adjustment
Adjust volume level
automatically
Setting sound effect
This unit supports Auto volume function that
automatically adjusts the volume level.
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
When the output sound is too loud or too low,
press AUTO VOLUME on the remote control. So
you can enjoy the sound with appropriate levels.
The displayed items for the equalizer may be
different depending on sound sources and effects.
To cancel this function, press the button again.
On Display
STD (Standard)
3
Description
You can enjoy the sound
without equalizer effect.
Operating
NEWS
This program make voice
sound clear, improving the
quality of voice sound.
MUSIC
You can enjoy comfortable
and natural sound.
CINEMA
You can enjoy more immersive
and cinematic surround
sound.
SPORTS
You can enjoy more dynamic
sound.
BASS
The Bass is Bass Blast. During
playback, reinforce the treble,
bass and surround sound
effect.
Adjust the woofer level
settings
You can adjust the sound level of woofer from - 40
dB to 6 dB.
1.Press WOOFER LEVEL.
2.Press VOL o/p to adjust the sound level of
the woofer.
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
yy Because this unit has an exclusive sound
effect for FLAC file, the sound effect is fixed
while playing FLAC file.
NB5540-NE.DSGPLLF_ENG.indd 28
2014-07-10
10:57:26
Operating 29
Controlling a TV with
the supplied remote
control
You can control your TV using the buttons below.
AV/INPUT
VOL +
PR/CH
VOL -
PR/CH
Operation
MUTEi
Turn the TV’s volume on or
off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
1 (TV Power)
Turn the TV on or off.
VOL o/p
Adjust the volume of the
TV.
PR/CH W/S
Scan up or down through
memorized channels.
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV Power) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
3
Operating
Button
Setting up the remote to
control your TV
2. Release the 1 (TV Power) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
,,Note
yy Depending on the TV being connected, you
may not be able to control your TV using
some of the buttons.
yy The remote control of the unit performs
basic operation of your TV. Please use the
TV’s remote control to enjoy advanced
operation of your TV.
NB5540-NE.DSGPLLF_ENG.indd 29
2014-07-10
10:57:27
30 Troubleshooting
Troubleshooting
PROBLEM
The unit does not
work properly.
No Power
CAUSE & CORRECTION
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy The power cord is unpluged.
Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Incorrect input source is selected.
Check the input source and select the correct input source.
No sound
yy The mute function is activated.
Press MUTEi or adjust the volume level to cancel the mute function.
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.
4
Troubleshooting
No woofer sound
No display
yy The power cord of the subwoofer is not connected.
Plug the power cord into the wall outlet securely.
yy Pairing between the unit and the subwoofer gets disconnected.
Connect the unit and the subwoofer. (Refer to the page 12.)
yy The DISPLAY OFF function is activated.
Press SLEEP repeatedly to cancel the function. (Refer to the page 21.)
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control
does not work
properly.
The AUTO POWER
function does not
work.
yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
yy The batteries in the remote control is exhausted.
Replace the batteries with new one.
yy Check connection of the external device such as TV, DVD/Blu-Ray player or
Bluetooth device.
yy Check the state of SIMPLINK and turn off SIMPLINK.
yy Depending on the connected device, this function may not operate.
yy Check whether your LG TV supports LG Sound Sync.
LG Sound Sync does
not work.
NB5540-NE.DSGPLLF_ENG.indd 30
yy Check connection of LG Sound Sync (Optical or wireless).
yy Check sound setting of your TV and this unit.
2014-07-10
10:57:27
Troubleshooting
PROBLEM
31
CAUSE & CORRECTION
Check the details below and adjust the unit according to them.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
When you feel the
output sound of the
unit is low.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting
on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
4
Troubleshooting
NB5540-NE.DSGPLLF_ENG.indd 31
2014-07-10
10:57:27
32 Appendix
Trademarks and
licenses
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0
Channel is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
5
Bluetooth® wireless technology is a system
which allows radio contact between electronic.
Appendix
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade
if the connection was made via Bluetooth®
wireless technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
NB5540-NE.DSGPLLF_ENG.indd 32
2014-07-10
10:57:29
Appendix 33
Specifications
NB5540
General (NB5540)
AC adapter requirements
Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Dimensions (W x H x D)
(1020 x 35 x 82) mm
Net Weight (Approx.)
1.86 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Input/Output
OPT. IN
3 V (p-p), Optical jack x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack) x 1
HDMI IN
19 Pin (Type A, HDMI™ connector) x 1
HDMI OUT
19 Pin (Type A, HDMI™ connector) x 1
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
USB
1.1
Bus Power Supply
5 V 0 500 mA
5
Appendix
Version
Amplifier
Total
320 W
Front
40 W x 2 (8 Ω at 1 kHz)
Surround
40 W x 2 (8 Ω at 1 kHz)
Subwoofer
160 W (3 Ω at 80 Hz)
THD
10 %
Wireless subwoofer (S54A1-D)
Power requirements
Refer to the main label on the subwoofer.
Power consumption
Refer to the main label on the subwoofer.
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
160 W
Max. Input Power
320 W
Dimensions (W x H x D)
(296 x 332 x 296) mm
Net Weight (Approx.)
7.6 kg
yy Designs and specifications are subject to change without prior notice.
NB5540-NE.DSGPLLF_ENG.indd 33
2014-07-10
10:57:29
34 Appendix
NB4540
General (NB4540)
AC adapter requirements
Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Dimensions (W x H x D)
(840 x 35 x 82) mm
Net Weight (Approx.)
1.55 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Input/Output
OPT. IN
3 V (p-p), Optical jack x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack) x 1
HDMI IN
19 Pin (Type A, HDMI™ connector) x 1
HDMI OUT
19 Pin (Type A, HDMI™ connector) x 1
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
USB
5
Version
1.1
Bus Power Supply
5 V 0 500 mA
Amplifier
Appendix
Total
320 W
Front
40 W x 2 (8 Ω at 1 kHz)
Surround
40 W x 2 (8 Ω at 1 kHz)
Subwoofer
160 W (3 Ω at 80 Hz)
THD
10 %
Wireless subwoofer (S44A1-D)
Power requirements
Refer to the main label on the subwoofer.
Power consumption
Refer to the main label on the subwoofer.
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
160 W
Max. Input Power
320 W
Dimensions (W x H x D)
(221 x 351.5 x 281) mm
Net Weight (Approx.)
7.32 kg
yy Designs and specifications are subject to change without prior notice.
NB5540-NE.DSGPLLF_ENG.indd 34
2014-07-10
10:57:29
Appendix 35
Maintenance
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Appendix
NB5540-NE.DSGPLLF_ENG.indd 35
5
2014-07-10
10:57:29
NB5540-NE.DSGPLLF_ENG.indd 36
2014-07-10
10:57:29
Download PDF