LG | NP7860P | LG NP7860W Owner’s Manual

Portable
Bluetooth® Speaker
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
NP7860W
NP7860P
NP7860U
NP7860B
*MFL69396811*
www.lg.com
Getting Started
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
WARNING: This unit contains magnets which can be
harmful to some kind of object ( Ex : Magnetic card,
Pacemaker etc..).
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible.
CAUTION when using this product in
environments of low humidity
yy It may cause static electricity in environments of
low humidity.
yy It is recommended to use this product after
touching any metal object which conducts
electricity.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
4
Getting Started
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
1
Getting Started
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, fire or
the like.
Do not remove battery incorporated with product for
your safety. If you need to replace the battery, take it
to the nearest authorized LG Electronics service point
or dealer for assistance.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refer to “ON” (power).
Refers to dangerous voltage.
Table of Contents
5
Table of Contents
1
1
Getting Started
3Troubleshooting
3
6
6
Safety Information
Included in the Package
Description of Part
13Troubleshooting
2Operating
7
Charging the Unit
7
– Connecting the AC adapter
7
– Checking the Charging Status
7Operations
7
– Power On/Off
8
– Simple Operation Guide
9 – Pairing
9 – NFC
10 – Advanced Multipoint
10 – Auto Reconnect
10 – Dual Play (Optional)
11 – Equalizer Mode Change
11 – Reset the Speaker Setting
11 – LG Sound Sync
11 When Using the Speaker
11 – BLUETOOTH®
12 – Dual Play
12 – LG Sound Sync
12 – Notice for Auto Power Off
4Appendix
14 Trademarks and Licenses
14 Handling the Unit
15Specifications
2
3
4
6
Getting Started
Included in the Package
Description of Part
1
Bluetooth®
Getting Started
NFC
Mood LED
EQ
Bluetooth Speaker
USB cable (1)
Volume
Down
Volume
Up
LED
Lighting
Simple Manual (1)
,,Note
Forward
Skip
Backward
Skip
Play/Pause
Actual product design may differ from images
shown in this manual.
Charging LED
Charging Port
Operating
Charging the Unit
Connecting the AC adapter
1. Connect the USB adapter and USB charging cable.
Checking the Charging Status
When AC Adapter is connected, battery charging is
started. When the speaker is turned on and unpaired,
you can check the charging status by touching p
button.
2. Open the USB cover, then plug the USB charging
cable (as shown below) into the speaker’s charging
port.
Blue light
3. Plug the charger into an electrical outlet.
Violet light
Charged
Charged
Charged
Charged
80
%
80
80 %
%
80
%
80
80 %
%
Operations
Power On/Off
Power on
Press the top of the speaker to turn the power on.
,,Note
yy A low battery alert will play once per minute.
yy If the battery is not charged, the speaker will
be turned off.
>>Caution
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.2 A) with this speaker because of danger
of explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
Power off
If you press the top of the speaker while it is turned
on, the speaker will be turned off.
2
Operating
Red light
(Not supplied)
7
8
Operating
Simple Operation Guide
Function
2
How to
Operating
Play / Pause
Touch
Volume Up
Touch
Volume Down
Touch
Display Battery Status
Touch and hold
Forward Skip
Touch
Backward Skip
Touch
Equalization Mode Changes
Touch
Enter Pairing Mode
Touch and hold
Change the Mood LED light.
(Blinking à Always On à Off)
Touch
Dual Play Inquire (First Speaker)
Touch and hold
+
Change to Dual Play (Second Speaker)
Touch and hold
+
End Dual Play
Touch and hold
+
Connect with TV Sync
Touch and hold
+
Reset the Speaker
Touch and hold
+
or
+
(about 5 secs)
,,Note
yy Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any moisture on the touch buttons before using.
yy Do not press the touch buttons hard to make it work.
- If you apply too much strength, it can damage the sensor of the touch buttons.
yy Touch the button that you want to work in order to operate the function correctly.
yy Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause
malfunctions.
Operating
Pairing
NFC
To use the speaker, you must first pair it with your
mobile device.
Bluetooth connection is available through NFC.
9
1. Turn on the speaker. The speaker enters pairing
mode.
In order to use this feature, you need to activate NFC
on your mobile device. (The Read/Write item should
be checked on the NFC menu on your mobile device.)
2. When the speaker enters pairing mode, LED light
blinks fast.
1. Bring your mobile device close to the LG logo on
the top of the speaker.
3. When searching for this speaker with the
Bluetooth device, a list of the devices found may
appear in the Bluetooth device display depending
on the type of Bluetooth device. The speaker
appears as “LG Sound 360 (xx)”.
2
Operating
4. Select “LG Sound 360 (xx)”.
,,Note
yy XX means the last two digits of Bluetooth
address. For example, if your speaker
has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG Sound
360 (08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices have a different pairing way.
Enter the PIN code (0000) as needed.
5. When the speaker is successfully connected to
your Bluetooth device, the speaker beeps once and
the LED light changes to slow blink.
,,Note
yy When the speaker is turned on, it will
automatically try to reconnect to the last
device which has been paired with at least
once.
yy If the speaker cannot connect to a previously
paired device in 20 minutes, it will be turned
off automatically.
2. In your mobile device, confirm the message from
the pop-up window to connect to the speaker.
3. When the speaker is successfully conncted to your
mobile device, the speaker will beep.
4. If you bring your mobile device close to the LG
logo(NFC) on the connected speaker again, the
connection will be disconnected.
10
Operating
Advanced Multipoint
Dual Play (Optional)
The speaker can be connected to two devices at the
same time.
You can enjoy stereo sound using two speakers.
Pairing with Two Devices
1. Pair your mobile device with the first speaker
(refer to the pairing instructions).
1. Connect the speaker with one of the two
Bluetooth-enabled mobile devices (Refer to the
“Pairing”.)
2
Operating
2. To add another Bluetooth mobile device, press and
hold h button for 2 seconds. Then, connect the
speaker with Bluetooth activated mobile device.
3. When multi-pairing is completed, play music of one
Bluetooth mobile device you want.
,,Note
yy When the speaker is connected to two
mobile devices at the same time (Multipoint),
the speaker will work with the primary mobile
device.
2. Touch h button and p button on speaker
the same time for about 2 seconds.
at
3. Touch h button and o button on speaker
the same time for about 2 seconds.
at
yy If the speaker fails to connect to the primary
mobile device through Easy Pairing, it will
enter Pairing mode.
Auto Reconnect
If in range of each other when the speaker is turned
on, the speaker and the primary mobile device will
reconnect automatically.
The secondary mobile device will need to be
connected manually from the available devices listed
in the Bluetooth menu.
,,Note
If the speaker and paired mobile device do not
reconnect automatically, touch h button on the
speaker to reconnect manually.
4. When the speaker is successfully connected, the
speaker beeps once and the LED light changes to
slow blink twice. If the speakers fail to detect, go
to step 1 and try again.
Operating 11
Equalizer Mode Change
Speaker has three types of preset Equalizer mode.
Briefly touch EQ button on the speaker. When you
touch EQ button, the EQ settings will be applied in
the order as below:
EQ Mode
LED Blinking
1
Treble Boost (High-Band Boost)
2
Power Boost Mode
(Full-Band Boost)
3
Reset the Speaker Setting
You can reset speaker settings such as the paired
device list, volume level, equalizer mode, and mood
LED to default.
1. Touch and hold h, V and C button at the
same time for about 5 seconds.
2. When It is done, the LED light blinks twice.
LG Sound Sync
LG Sound Sync enables you to control some functions
of this speaker by your LG TV remote control. Make
sure that your TV has LG Sound Sync logo as shown
above.
1. Set up the sound output of your TV.
TV setting menu / [Sound] / [TV Sound
output] / [LG Sound Sync (Wireless)]
,,Note
The setting method of LG Sound Sync may differ
depending on the TV. Refer to your TV manual.
2. Touch h button and N button at the same time.
BLUETOOTH®
yy When using Bluetooth technology, you have to
make a connection between the speaker and the
Bluetooth device as close as possible and keep
the distance.
However you may experience issues in the cases
below :
-- There is a obstacle between the speaker and
the Bluetooth device.
-- There is a device using same frequency with
Bluetooth technology such as a medical
equipment, a microwave or a wireless LAN
device.
yy Even if this speaker is connected up to two
Bluetooth devices, you can play and control music
by selecting one of the connected devices.
yy Removable/detachable Bluetooth device
(Ex : Dongle etc..) doesn’t support multi pairing.
yy Multi-pairing connection (Advanced Multipoint) is
only available with Android™ or iOS devices. (Multipairing connection may not be available with some
devices due to their specifications.)
yy When two mobile devices are connected to a
speaker, each mobile device operates volume level
independently.
yy The sound may be interrupted when the
connection interfered by the other electronic wave.
yy Depending on the type of the device, you may not
be able to use the Bluetooth fuction.
yy The more distance between the speaker and
the Bluetooth device, the lower sound quality
becomes.
yy Bluetooth connection will be disconnected when
the speaker is turned off of the Bluetooth device
gets too far from the speaker.
2
Operating
Bass Boost Mode
(Low-Band Boost, Default)
When Using the Speaker
12
Operating
Dual Play
Notice for Auto Power Off
yy When two speakers operate as Dual Play,
the volume is adjusted at the same time.
yy If the speaker is not connected to any Bluetooth
device in 20 minutes, it will be turned off
automatically.
yy If one of the speakers is turned off,
the another one is also turned off automatically.
yy To disable Dual Play connection, touch and hold h
button and obutton (or p button) at the same
time.
2
Operating
yy Dual Play is supported on Android or IOS devices.
yy During Dual Play, you can only connect your mobile
device to one of the Bluetooth speakers
(speaker or speaker ).
yy Dual Play is only available with the same kind of
this speaker for use with Android and iOS devices.
Dual Play is not available on other Music Flow
series or other smart audio products.
yy Multi-pairing (Advanced Multipoint) is not available
during Dual Play.
yy When Dual Play connection is on processing,
the function cannot be changed without first
disconnecting from the paired mobile device. Once
disconnected, another mobile device can be paired
with the speaker.
yy While Dual Play mode, the speakers will not be
visible on other Bluetooth-enabled mobile devices.
yy We recommend that the speakers should be
connected each other first to enjoy Dual Play, then
pair with a device such as a Bluetooth-enabled
mobile or a TV.
LG Sound Sync
yy When the connection fails, make sure of the
condition of the TV and power.
yy Make sure of the condition of this speaker and the
connection in the cases below when using
LG Sound Sync.
-- Turn off the speaker.
-- Changing the function to the others.
-- Disconnecting the connection caused by
interference or a distance.
yy When the speaker is turned off automatically,
you need to press the top of the speaker twice
(once to complete the power off and a second
time to turn the power on)
Troubleshooting 13
Troubleshooting
Problem
Cause & Correction
No Power
yy The battery is discharged. Charge the battery.
yy The volume of this speaker or smart device may be set up to minimum. Adjust
the volume of this speaker or the smart device which is paired with the speaker.
No sound or sound
distortion
yy If the volume of the paired device is set up to maximum, the sound may be
distorted. Reduce the volume of the paired device.
yy If you use this speaker for purposes other than playing music, it may not work
properly or the sound quality may decrease.
Bluetooth Pairing Failed
yy Ensure Bluetooth is on.
yy Deactivate Bluetooth on the Bluetooth-enabled device you are trying to pair
with, and then reactivate Bluetooth to try to pair again.
yy Remove obstacles between this speaker and the Bluetooth-enabled device
you are trying to pair with.
yy Ensure that the device you want to pair with has been already paired with
another Bluetooth-enabled device. If it is, disable the unwanted connection.
LG Sound Sync Failed
yy If the connection fails, check this speaker and your TV for their power and
modes.
yy If you turn off the TV and turn it on again, you will need to set up the LG sound
sync connection again.
yy If this speaker works improperly, power it off and then back on again.
yy If the battery has been completely discharged, Bluetooth information may be
deleted. Always maintain a charge to better ensure Bluetooth information is
saved.
Speaker Not Properly
Working
yy When this speaker’s power is off, the previous settings/mode may not be
saved. Reconnect settings/mode using the instructions for this speaker.
yy Do not use this speaker where temperature and humidity are too high or too
low.
yy Please contact LG Electronics Customer Service Center if you are still having
issues with this speaker.
3
Troubleshooting
Bluetooth pairing may not work properly depending on the types of Bluetooth
devices or environments.
14
Appendix
Trademarks and
Licenses
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Bluetooth wireless technology is a system which
allows radio contact between electronic devices.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth wireless
technology.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by LG Electronics is under license.
4
Appendix
Other trademarks and trade names are those of
their respective owners.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Appendix 15
Specifications
General
Power requirements
5 V 0 1.2 A (AC Adapter)
Built-in rechargeable battery
Power consumption
6W
Dimensions
Ø 67 mm x 204 mm
Net Weight (Approx.)
0.6 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 60 %
Communication
Bluetooth 4.1
External Connector
USB
Micro USB port for charging battery
Speaker
4
Built-in
Impedance Rated
Woofer 4 Ω, full range 8 Ω
Rated Input Power
12 W
Battery
Battery capacity
5200 mAh
Operating time
Approx. 20 hours.
Based on 30% volume, 1 kHz signal with a fully charged battery
Charging time
Less than 5.5 hours.
The operating time can be varied depending on the conditions of the battery
or operation.
yy Product designs and specifications are subject to change without prior notice.
yy As this wireless device may cause electromagnetic interference, safety or medical services will not be provided.
Appendix
Type
Download PDF

advertising