LG | XB64 | LG XB64 Owner’s Manual

ENGLISH
OWNER'S MANUAL
DVD Micro Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
XB64 (XB64-F0U/XBS64V)
P/NO : MFL61543978
ENG.indd 1
2010.2.8 11:32:20 AM
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions. Slots and openings in the
cabinet are provided for ventilation and to ensure reliable operation of the product
and to protect it from over heating. The openings shall be never be blocked by
placing the product on a bed, sofa, rug or other similar surface. This product shall not
be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service centre.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
Where the mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.
This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the
assembly. To prevent contamination of the environment and bring on possible threat
to human and animal health, the old battery or the battery put it in the appropriate
container at designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free reimbursement
systems batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service centre.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
2
The appliance is not intended for use by young children or infirm persons without
supervision.
Young Children should be supervised to ensure that they do not play with
appliance.
If the appliance is supplied from a cord extension set or an electrical portable
outlet device, the cord extension set on electrical portable outlet device must be
positioned so that it is not subject to splashing or ingress of moisture.
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 3
Welcome to your New DVD MICRO Hi-Fi SYSTEM
Contents
Setting up
Main Unit
Remote control
OSD initial language settings - Optional
Initial setting of the Area Code - Optional
Adjusting the general settings
Setting the Clock
Displaying Disc information
Playing a Disc or file
Listening to the radio
Listening to music from your portable player
Using a USB device
Recording to USB
Language Codes
Area Codes
Troubleshooting
Types of Playable Discs
Specifications
4
5
6
7
7
8-9
10
11
11-13
14
15
15
16
17
17
18
19
20
3
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 4
Setting up
Connecting your unit to your TV and aerials.
Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV and choose the A, B connection. Picture quality improves in order from A to B.
FM - aerial
c Video Out connection (A)
Connect the VIDEO
OUTPUT(MONITOR) jack on the
unit to the corresponding input jack
on your TV using a Video cable.
a Stretch the FM aerial.
The reception will be at its best when the end of the
aerial is stretched to be in a straight line and
horizontal.
COMP
T VIDEO
OMEN
(PROG
RESSIVE
SCAN
)
b Component Video connection (B)
Connect the COMPONENT VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on the unit to the
corresponding input jacks on your TV using a Y PB
PR cable.
- If your TV accepts progressive format signals, you
must use this connection and set [Progressive
Scan] in [Display] setup to [On] (See page 8).
a
d Connect the speaker cables to the
player
To connect the cable to the unit,
press each plastic finger pad to
open the connection terminal. Insert
the wire and release the finger pad.
Connect the black end of each wire
to the terminals marked -(minus)
and the other end to the terminals
marked + (plus).
b
c
d
NOTES:
• If TV screen becomes discolored do not place speakers within 30cm from TV.
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the
cords are reversed, the sound will be distorted and will lack base.
4
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 5
Main Unit
1
DISPLAY WINDOW
2
1/]] Power on/off
3
DISC TRAY
4
FUNC.
Selects the function.
5
6
EQ: Sound quality adjustment
You can choose sound impressions.
PORT.IN
The player can be used to play the
music from many types of portable
player.
PHONES
Headphone jack. ( 3.5 mm)
A warning that excessive sound
pressure from earphones and
headphones can cause hearing loss.
CLOCK
For setting the clock and checking the
time.
TIMER
(See the “Using your player as an
alarm clock”).
6
SET
Confirms the setting
REC.
Recording (Recording to USB)
USB Connector
7
Z OPEN/CLOSE
You can use it when inserting or
removing CDs.
8
VOL.+/ Controls the volume when using any
function.
./>
TUN.-/ TUN.+
Selects the radio station
Searches backward or Forward
Skips to the previous/ next track
B [] Playing/Pausing
9
x STOP
1
2
3
4
7
8
5
9
OPEN
6
5
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 6
Remote control
FUNCTION: Selects the function and input source.
SLEEP: You can select delay time between 10 and 180
minutes, after which the unit will turn off. To check the
remaining time, press SLEEP. (Dimmer: Dims the LED
(Light-emitting diode) of front panel by half in power-on
status.).
1 POWER: Switches the unit ON or OFF.
Z OPEN/CLOSE: Opens and closes the disc Drawer.
TITLE: If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu
may not appear.
DISPLAY: Accesses On-Screen Display.
MENU: Accesses the menu on a DVD disc.
SETUP: Accesses or removes setup menu.
REPEAT/RANDOM: To select a play mode.
(Random/ Repeat)
MUTE: Temporarily stop the sound.
EQ (Equalizer effect): You can choose sound impressions.
CLEAR: Removes a track number on the program List.
VOL: Adjusts spaker volume.
TV Control buttons: Controls the TV. (LG TV only)
U u): Selects programme of Radio.
PRESET (U
TUN. (-/+): Tunes in the desired radio station.
I i U u (left/right/up/down): Navigates on-screen
displays.
ENTER: Acknowledges menu selection.
O): Moves backwards in the menu or exiting
RETURN (O
the setup menu.
REC(z): Recording to USB
STOP (x): Stops playback or recording.
PLAY (B): Starts playback.
MO./ST.: Improves radio signal reception.
PAUSE/STEP (X): Pauses playback.
SKIP (./>): Goes to next or previous chapter/
track / file.
bb/BB): Searches backward or forward.
SCAN (b
0-9 numerical buttons: Selects numbered options in a
menu.
SUBTITLE: During playback, you can select a desired
subtitle language.
PROG./MEMO.: Accesses or removes Program menu.
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.
* : The button is not available
6
Put the battery into the remote control.
Make sure that the + (plus) and - (minus) on the
batteries match those on the remote control.
Battery shall not be exposed to excessive heat such
as sunshine, fire or the like.
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 7
OSD initial language settings
- Optional
Initial setting of the Area
Code - Optional
when using this unit for the first time, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit.
When you use this unit for the first time, you have to set the Area Code
as shown below.
ON REMOTE
ON REMOTE
1 Display setup menu
1 Turn the power on
The language list appears
2 Select the language
3 Press
4 To confirm press
1 POWER
IiUu
ENTER
I i ENTER
2 Select LOCK menu on the first level
3 Move to second level
The activated Area Code appears on the
second level.
SETUP
Uu
i
4 Move to the third level
i
5 Enter a new password
Numeric (0-9)
and ENTER
6 Recheck the entered new password
Numeric (0-9)
and ENTER
7 Select a code for a geographic area
After select, Rating and Password will be
activated.
UuIi
8 To confirm what you press
Make sure to finish setting the Area Code.
ENTER
7
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 8
Adjusting the display settings
Adjusting the general settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
ON REMOTE
1 Display setup menu
2 Select a desired option on the first level
3 Move to the second level
4 Select a desired option on the second level
5 Move to the third level
6 Change the setting
SETUP
Uu
i
i
U u, ENTER
Adjusting the language settings
OSD (Menu Language) – Select a language for the Setup menu and onscreen display.
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/
Disc Subtitle/ Disc Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language
code list in the reference chapter (Page 17). If you make a mistake
before pressing ENTER, press CLEAR.
8
Select when a standard 4:3 TV is connected.
Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
wide screen programs and films to be displayed on your TV
screen.
[Letterbox]
Uu
Adjusting the general settings more you can do
[Off] (for Disc Subtitle): Turn off Subtitle.
[4:3]
[16:9]
[Panscan]
This displays a wide screen picture with black bands at
the top and bottom of the screen.
This fills the entire 4:3 screen, cropping the picture as
necessary.
Progressive Scan (For Component Video connections) – Selects whether
the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks output progressive
signal. If your TV accepts progressive format signals, you will enjoy accurate
color reproduction and high quality image by selecting [On]. If your TV does not
accept progressive format signals, select [Off].
If you set Progressive Scan to [On] in error, you must reset the unit. First,
remove the disc from the unit. Next, press and hold STOP for five seconds. The
video output will be restored to the standard setting, and a picture will be visible
on your TV.
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 9
Adjusting the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo.
This function is effective for multi-channel karaoke DVDs only.
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so.
1 Enter a 4-digit password then press ENTER.
2 Enter it again then press ENTER to verify. If you make a mistake while
entering number, press CLEAR then correct it.
Area Code – Select a code for a geographic area to set the playback rating
level. This determines which area’s standards are used to rate DVDs controlled
by the parental lock. ( See the Area Codes on page 17.)
Rating – Select a rating level. The higher the level is, the stricter the rating.
Select [Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New] Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change] Enter the new password twice after entering the current password.
If you forget your password you can reset it.
1 Remove the disc in the unit.
2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER.
The password has now been cleared.
Adjusting the others settings
DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service.
For more information, visit www.divx.com/vod.
Press ENTER and you can view the registration code of the unit.
9
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 10
Enjoying a pre-programmed sound field
The system has a number of pre-set surround sound fields. You can select a
desired sound mode by using EQ. The displayed items for the Equalizer may
be different depending on sound sources and effects.
AUTO EQ
Sets the sound equalizer to the mode that is the most
similar to the genre which is included in the MP3 ID3 tag
of song files.
Setting the Clock
ON UNIT
1 Turn the power on
2 Press until the time display flashes on the
display
POP
CLASSIC
ROCK
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual rock
pop, jazz or classic concert.
XDSS ON
Reinforce the treble, bass and surround sound effect.
3 Choose from either
AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
NORMAL
You can enjoy the sound without equalizer effect.
4 Confirm your selection
1 /]]
CLOCK
./>
SET
5 Select the hours
./>
6 Press
7 Select the minutes
./>
8 Press
SET
SET
Using your player as an alarm clock
1 Turn the power on.
2 Press TIMER. Each functions flashes.
3 Press SET when the function you want to be woken by is showing.
4 “ON TIME” will be displayed. This is where you set the time you want the
alarm to start. Use ./> to change the hours and minutes and SET to
save.
5 The “OFF TIME” will be displayed. This is where you set the time you want
the function to stop.
6 Use ./> to change the hours and minutes and press SET
to save.
7 You will be shown the volume (VOL) you want to be woken by. Use
./> to change the volume and SET to save. The clock icon “
”
shows that the alarm is set.
8 Press TIMER button 2 times. You can check the setting status.
NOTES:
- If you set the clock time, you can check the time by pressinng CLOCK
even when the plyaer is turned off.
- If you set the clock time and alarm, you can check the alarm icon
by pressing CLOCK even when the player is turned off.
10
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 11
Displaying Disc information
Playing a Disc or file
ON REMOTE
ON REMOTE
1 Press
DISPLAY
Uu
2 Select an item
Ii
3 Adjust the display menu settings
O RETURN
4 To return or exit
Z OPEN/CLOSE
1 Insert a disc into the unit
2 Select a DVD/CD
FUNCTION
IiUu
3 Adjust the menu settings /
Select a file from the menu
B PLAY or ENTER
4 Start the Disc playing
Displaying Disc Information - more you can do
You can select an item by pressing U u and change or select the setting by
pressing I i.
Current title (or track/ file)
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/ total number of angles
Notes:
Put a disc on the disc tray with the disc hole on it matched and press it unitl you
hear a click. If not, the disc cannot be read.
Playing a Disc or file - more you can do
Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play
by pressing MENU.
Moving to the previous/ next page on the file list menu
Selected sound/ EQ mode
MP3
Symbol Used in this Manual
WMA
DivX
ACD
JPG
Press and hold U u to move to the previous or next page.
ALL
MP3 files
MP3
DVD and finalized DVD ± R/ RW
DVD
WMA files
WMA
DivX files
DivX
Audio CDs
ACD
JPEG files
JPG
All discs and file listed below
x STOP
5 To stop the Disc playing
Playing a DVD that has a menu
DVD
Most DVDs now have menus which load first before the film begins to play.
1 You can navigate through these menus using U u I i to highlight an option.
2 Press ENTER to select.
Skipping to the next/ previous chapter/ track/ file
MP3
WMA
DVD
DivX
ACD
Press SKIP (>) to move to the next chapter/ track/ file.
Press SKIP (.) to return to the beginning of the current chapter/ track/ file.
Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file.
11
XB64-F0U-AMYSLL-ENG
Pausing playback
2/19/10
10:14 AM
Page 12
Viewing the Title menu
ALL
DVD
1 Press PAUSE/STEP (X) to pause playback.
2 Press PLAY (B) to continue playback.
Press TITLE to display the disc's title menu, if available.
Frame-by-Frame playback
Searches for the starting pointing of entered time code.
1 Press DISPLAY then select clock icon.
2 Enter a time then press ENTER.
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter
“11020” by using numerical buttons and press ENTER. if you enter the wrong
number, press CLEAR and enter the correct code again.
DVD
Starting play from selected time
DivX
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
Playing repeatedly or randomly MP3
WMA
DVD
DivX
ACD
Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will
be played back repeatedly or randomly.
To return to normal playback, press REPEAT/RANDOM repeatedly.
- Random play mode: only music files.
Fast forward or fast reverse
MP3
WMA
DVD
DivX
ACD
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY (B) to continue play at normal speed.
Slowing down the playing speed
DVD
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed.
1.5 times faster playback
DVD
Press PLAY (B) when a DVD is already playing to watch and listen to a DVD
1.5 times faster than normal playback speed. “B x1.5” will appear in the screen.
Press PLAY (B) again to return to normal playback speed.
Selecting a subtitle language
DVD
DivX
During playback, press SUBTITLE repeatedly to select a desired subtitle
language.
Changing the character set to display DivX ® subtitle correctly
- Optional DivX
1 If the subtitle does not display properly during playback, press and hold
SUBTITLE for about 3 seconds to display the language code menu.
2 Press SUBTITLE repeatedly to change the language code until the subtitle is
displayed properly.
12
Last Scene Memory
DVD
DivX
DVD
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off (Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Creating your own program ACD
MP3
WMA
You can play the contents of a disc in the order you want by arranging the order
of the music on the disc. The program is cleared when the disc is removed.
1 Select a desired music file then press PROG./MEMO. or select “
” and then
press ENTER to add the music file to the program list.
2 To add all music files on the disc, select “
” and then press ENTER.
3 Select a music files from the program list then press ENTER to start programmed
playback.
4 To clear a music files from the program list, select the music you want to clear
then press CLEAR or select “
” icon and then press ENTER. To clear all
music files from the program list, select “
” then press ENTER.
Displaying file information (ID3 TAG) MP3
You can check the ID3 TAG information of MP3 files only in discs by pressing
DISPLAY repeatedly.
Viewing photo files as a slide show
JPG
1 Use U u I i to highlight (
) icon then press ENTER to start slide Show.
2 You can change slide show speed using I i when (
) icon is highlighted.
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Skipping to the next/ previous photo
Page 13
JPG
Press SKIP (. or >) or I i to view the previous/ next photo.
Rotating a photo
JPG
Use U u to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
System Select - Optional
You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more
than five seconds to be able to select a system. (PAL/ NTSC/ AUTO)
Playable file requirement
DivX
• Available resolution: up to 800x600 (W x H) pixels
• The file name of the DivX subtitle should be 45 characters or less.
• If there is a code impossible to express in the DivX file, it may be displayed
as a “ _ ” mark on the display.
• If the video and audio structure of recorded files are not interleaved, either
video or audio is output.
• Playable DivX file: “.avi”, “.mpg”, “.mpeg”, “.divx”
• Playable Subtitle format: SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha
(*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt)
• Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX”
• Playable Audio format: “AC3”, “PCM”, “MP3”, “WMA”
• For discs formatted in Live file system, you can not play it on this player.
• If the name of a movie file is different from that of the subtitle file, during
playback of a DivX file, the subtitle may not be displayed.
• If you play a DivX file different from the DivX spec, it may not operate
normally.
MP3/ WMA
• Sampling frequency: between 32 to 48 kHz (MP3/ WMA)
• Bit rate: between 32 to 320 kbps (MP3), 40 to 192 kbps (WMA)
• File extensions: “.mp3”/ “.wma”
• CD-ROM file format: ISO 9 660 LEVEL 1 / JOLIET
• We recommend that you use Easy-CD Creator, which creates an ISO 9 660
file system.
• They should not contain special letters such as / ? * : “ < > l etc.
• The total number of files on the disc should be less than 999.
This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many different types of
recordable disc formats (including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see above) to ensure
Compatible playback.
Customers should note that permission is required in order to
download MP3/ WMA files and music from the Internet. Our company
has no right to grant such permission. Permission should always be
sought from the copyright owner.
JPG
• Normal: 5 120 x 3 840, Progressive jpeg: 2 043 x 1 536
• Recording condition: ISO 9 660 LEVEL 1/ JOLIET
• Maximum files: Under 999.
• Some discs may not operate due to a different recording format or the
condition of disc.
• File extensions: “.jpg”
13
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 14
Listening to the radio
Make sure both the FM aerials be fully extended.
ON REMOTE
1 Select FM
2 Select a radio station
FUNCTION
TUN.- / +
3 To save a radio station
A preset number will show in
the display.
PROG./MEMO.
4 Select the preset number
Up to 50 radio stations can
be saved.
PRESET U /u
5 To confirm press
PROG./MEMO.
Listening to the radio - More you can do
Looking for radio stations automatically
Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROG./MEMO. for two seconds.
- “ERASE ALL” will flash up on the display.
2 Press PROG./MEMO.
Improving poor FM reception
Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
14
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 15
Listening to music from your
portable player
Using a USB device
You can enjoy media files saved on a USB device by connecting it to
the USB port of the unit. If you want to operate other function, see the
Playing a Disc or file section.
ON REMOTE
1 Connect the portable player
to the PORT.IN (PORTABLE IN)
connector on the unit.
ON REMOTE
1 Connect the USB device to
the USB port of the unit.
2 Select the function.
PORT.IN
3 Select a file you want to play.
4 Start your media playing.
2 Turn the power on.
3 Select the function.
Turn on the portable player and
start it playing.
5 To stop, press
6 Before disconnecting, you have
to change to any other function.
1 POWER
FUNCTION
FUNCTION
Uu
B PLAY or ENTER
x STOP
FUNCTION
Compatible USB Devices
• MP3 Player: Flash type MP3 player.
• USB Flash Drive: Devices that support USB2.0 or USB1.1.
• The USB function of this unit does not support all USB devices.
USB device requirement
Devices which require additional program installation when you have connected
it to a computer, are not supported.
Look out for the following
•
•
•
•
•
•
•
•
•
Do not extract the USB device while in operation.
For a large capacity USB, it may take longer than a few minute to be searched
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device is not
recognized.
Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
This unit is not supported when the total number of files is 1000 or more.
External HDD, Card readers, Locked devices, or hard type USB devices are
not supported.
USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
15
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 16
When you are recording, look out for the following
Recording to USB
ON REMOTE
1 Connect the USB device to the
USB port of the unit.
2 Select a mode in which you want
to record (ex. CD/ TUNER/ ...)
Play a sound source first.
If you want to record desired music
file in disc to USB, play a file before
starting the recording.
FUNCTION
3 Start the recording
z REC
4 To stop, press
x STOP
Recording to USB - more you can do
Recording Music file in disc source to USB
One track recording
If the USB recording is started during playback of the CD, the one track/ file
would be recorded onto the USB.
• You can check the recording percentage rate for the USB record on the
screen during the recording.(AUDIO, MP3/ WMA CD only)
• During recording MP3/ WMA, there is no sound.
• When you stop recording, the file that has been recorded at that time will be
stored.(AUDIO CD Only)
• Do not remove the USB device during USB recording. It will result in an
incomplete file being made and may not be deleted on a PC.
• If USB recording does not work, messages like “NO USB”, “ERROR”, “USB
FULL” or “NO REC” will be displayed on the display window.
• Multi card reader device or External HDD can not be used for USB
recording.
• A file is recorded up to 2 hours maximum (about 128 Mbytes) when you
record for a long term.
• When you stop recording during playback, the file will not be stored.
• USB record is not possible from CD-G discs.
• You may not record more than 999 files.
• The file number is saved automatically.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other sources
ABC(File name)
DEF(File name)
All tracks recording
If the record button is pressed with the CD stopped, all tracks/ files will be
recorded.
Program list recording
USB records after creating your own program if you want to record the track
you want (AUDIO CD Only).
16
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This
equipment should not be used for such purposes.
Be responsible
Respect copyrights
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 17
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
17
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 18
Troubleshooting
CAUSE
PROBLEM
CORRECTION
No power.
The power cord is disconnected.
Plug the power cord into the wall outlet securely.
No picture.
The TV is not set to receive the DVD signal.
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
The video cables are not connected securely.
Connect the video cables securely to both the TV and unit.
No disc is inserted.
Insert a disc
An unplayable disc is inserted.
Insert a playable disc (check the disc type, colour system and
regional code).
The disc is inserted upside down.
Place the disc in the tray with the printed side facing up.
The menu is open on screen.
Press SETUP to close the menu screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
Enter your password or change the rating level.
Humming noise heard while a
DVD or CD is playing.
The disc is dirty.
Clean the disc using a soft cloth with outward strokes.
The unit is located too close to the TV, causing feedback.
Move the unit and audio components further away from your
TV.
Radio stations can’t be
tuned in properly.
The aerial is positioned or connected poorly.
Check the aerial connection and adjust its position.
A DVD/CD will not play.
The remote control doesn’t
work well / at all.
18
Attach an external aerial if necessary.
The signal strength of the radio station is too weak.
Tune to the station manually.
No stations have been preset or preset stations have been
cleared (when tuning by scanning preset channels).
Preset some radio stations.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 23 feet (7 m) of the unit.
There is an obstacle in the path between the remote control
and the unit.
Remove the obstacle.
The battery in the remote control is flat.
Replace the battery with new one.
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 19
About the Symbol Display
“ ” may appear on your TV display during operation and indicates that the
Types of Playable Discs
Type
function explained in this owner’s manual is not available on that specific DVD
video disc.
Logo
DVD-VIDEO: Discs such as movies that can
be purchased or rented.
DVD-R: Video mode and finalized only
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
DVD+R: Video mode only
Supports the double layer disc also
DVD+RW: Video mode only
Audio CD: Music CDs or CD-R/ CD-RW in music
CD format that can be purchased.
This unit plays DVD ± R/ RW and CD-R/ RW that contains audio
titles, DivX, MP3, WMA or JPEG files. Some DVD ± RW/ DVD ± R or
CD-RW/ CD-R cannot be played on this unit due to the recording
quality or physical condition of the disc, or the characteristics of the
recording device and authoring software.
“Dolby”and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labelled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/ Live File System: Disc format system for Windows Vista)
19
XB64-F0U-AMYSLL-ENG
2/19/10
10:14 AM
Page 20
Specifications
General
Power supply
Refer to the main label.
Power consumption
Refer to the main label.
Net Weight
2.8 kg
Bus power supply (USB)
DC 5 V
500 mA
USB Version
1.1
External dimensions
(170 x 244 x 275) mm
(W x H x D)
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 85 %
Output power
30 W + 30 W
T.H.D
0.50 %
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
DVD/CD
Frequency response
100 Hz to 18 kHz
Signal-to-noise ratio
60 dB
Dynamic range
65 dB
Available resolution according to connection
[COMPONENT VIDEO OUT]
[VIDEO OUT]
Speaker
Type
impedance
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Y:1.0 ± 0.2, PB:0.7 ± 0.1, PR:0.7 ± 0.1
1.0 ± 0.1 V
XBS64V
2 Way 2 Speaker
6Ω
30 W
60 W
(150 x 244 x 182) mm
1.9 kg
Designs and specifications are subject to change without prior notice.
20
ENG.indd 2
2010.2.8 11:32:21 AM
Download PDF