LG | 22MP68VQ-P | LG 23MP68VQ-P Owner’s Manual

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating your set and
retain it for future reference.
IPS LED MONITOR MODEL
22MP68VQ
23MP68VQ
24MP68VQ
27MP68VQ
www.lg.com
2
CONTENTS
ENGLISH
LICENSE----------------------------- 3
ASSEMBLING AND PREPARING-- 4
--Unpacking--------------------------------------- 4
--Supported Drivers and Software--------------- 5
--Parts and buttons------------------------------ 6
--Moving and Lifting the Monitor---------------- 8
--Setting up the Monitor set -------------------- 9
USING THE MONITOR SET-------
14
--Connecting to a PC---------------------------- 14
--Connecting to AV Devices--------------------- 15
--Connecting to External Devices--------------- 16
CUSTOMIZING SETTINGS-------
17
--Customizing settings-------------------------- 18
Menu Settings
-Quick Settings
-Picture
-General
-Auto Configuration
-Reset
TROUBLESHOOTING-------------
25
‌SPECIFICATIONS-----------------
27
--Preset Modes (Resolution)-------------------- 31
--Indicator---------------------------------------- 31
3
ENG
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased
your product. The illustrations in this manual may differ from the actual product and accessories.
CD(Owner's Manual) /
Card
D-SUB Cable
( This cable is not included in all
countries. )
DVI-D Cable
( This cable is not included in all
countries. )
or
Power Cord
AC-DC Adapter
( Depending on the country )
Stand Body
CAUTION
Stand Base
AC-DC Adapter
( Depending on the country )
Cable Holder
HDMI Cable
( This cable is not included in
all countries. )
22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ
22MP67HQ 23MP67HQ 24MP67HQ 27MP67HQ
22MP67VQ 23MP67VQ 24MP67VQ 27MP67VQ
22MP67VQ 23MP67VQ 24MP67VQ 27MP67VQ
Do not use any unapproved accessories to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
yy
functions.
5
Supported Drivers and Software
Installation Priority
22MP68VQ , 23MP68VQ
24MP68VQ , 27MP68VQ
Monitor Driver
Recommended
O
OnScreen Control
Recommended
O
Drivers and Software
Required and Recommended: You can download and install the latest version from the enclosed CD or from the
yy
LGE website (www.lg.com).
ENG
ENGLISH
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product
package.
6
Parts and buttons
ENGLISH
ENG
Joystick Button/
Power Indicator
yyOn : power is on
yyOff : power is off
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
The joystick button is located at the bottom of the monitor.
yy
7
Parts and buttons
ENG
ENGLISH
Input Connector
8
Moving and Lifting the Monitor
ENGLISH
ENG
When moving or lifting the monitor, follow these instructions
to prevent the monitor from being scratched or damaged and
to ensure safe transportation regardless of its shape or size.
CAUTION
As far as possible, avoid touching the monitor screen.
yy
This may result in damage to the screen or some of
the pixels used to create images.
It is advisable to place the monitor in the original box
yy
or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the
yy
power cord and all cables.
Hold the top and bottom of the monitor frame firmly.
yy
Do not hold the panel itself.
If you use the monitor panel without the stand base,
yy
its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor
or human injury. In addition, this may cause the joystick
button to malfunction.
When holding the monitor, the screen should face
yy
away from you to prevent it being scratched.
When moving the monitor, avoid any strong shock or
yy
vibrations to the product.
When moving the monitor, keep it upright, never turn
yy
the monitor on its side or tilt it sideways.
9
Setting up the Monitor set
Detaching the Stand Base
1
1
ENG
ENGLISH
Attaching the Stand Base
Stand Body
Stand Base
1
1
Stand Body
CAUTION
1
2
To protect the screen from scratches, cover the
yy
surface with a soft cloth.
Stand Base
2
2
3
Stand Body
3
3
Stand Base
3 you can push the Latch with
* If it is difficult to remove,
a small flat-head screw driver or a flat-headed tool and
disassemble as shown below.
3
3
10
CAUTION
ENGLISH
ENG
Illustrations in this document represent typical
yy
procedures, so they may look different from the actual
product.
Do not carry the monitor upside down by just holding
yy
the stand base. This may cause the monitor to fall off
the stand and could result in personal injury.
When lifting or moving the monitor, do not touch the
yy
monitor screen. The force applied to the monitor screen
may cause damage to it.
If you use the monitor panel without the stand base,
yy
its joystick button may cause the moni-tor to become
unstable and fall, resulting in damage to the monitor
or human injury. In addition, this may cause the joystick
button to malfunction.
Mounting on a table
1 Lift and tilt the Monitor set into its upright position on a
table.
Leave a 100 mm (minimum) space from the wall for
proper ventilation.
100 mm
100 mm
100 mm
100 mm
2 Connect the AC-DC Adapter and Power Cord to a wall
outlet.
or
11
3 Press the joystick button on the bottom of the monitor
WARNING
to turn on the monitor.
CAUTION
Unplug the power cord before moving the Monitor to
another location. Otherwise electric shock may occur.
Using the cable holder
Do not touch or press the screen when adjusting the
angle of the monitor.
Do not hold this set like below picture.Monitor screen
can detach from stand base and injure your body.
Cable holder
NOTE
Tilt from +15 to -2 degrees up or down to adjust the
angle of the Monitor set to suit your view.
Front
Rear
ENG
ENGLISH
When you adjust the angle, do not hold the bottom
of the Monitor set frame as shown on the following
illustration, as may injure your fingers.
12
Using the Kensington security system
ENGLISH
ENG
The Kensington security system connector is located at the
back of the Monitor set. For more information of installation
and using, refer to the manual supplied with the Kensington
security system or visit http://www.kensington.com .
Connect the Kensington security system cable between the
Monitor set and a table.
NOTE
The Kensington security system is optional. You can
obtain it from most electronics stores.
13
Installing to a wall
Wall Mount (A x B)
yy
100 mm
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to
the monitor and to the wall.
A
Wall Mount (A x B)
Standard screw
Number of screws
Wall Mount Plate
(Optional)
22MP68VQ
23MP68VQ
24MP68VQ
75 x 75
27MP68VQ
100 x 100
M4 x L10
4
LSW140B
B
CAUTION
Unplug the power cord before moving or installing
yy
the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a slanted
yy
wall may result in the monitor falling off, which
could lead to injury. Please use the genuine LG wall
mounting bracket. For more information, contact
your local retail store or a qualified installer.
Applying excessive force when fastening screws may
yy
cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Use the wall mounting bracket and screws that
yy
conform to the VESA standard. Damage caused by
the use or misuse of inappropriate components will
not be covered by the product warranty.
Screw length from outer surface of back cover should
yy
be under 8mm.
Wall mount Pad
1 If you use screw longer than standard, the monitor might
be damaged internally.
2 If you use improper screw, the product might be damaged
and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Model
ENG
ENGLISH
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Please refer to the manual to install and set up a
tilting wall mounting bracket.
Back Cover
Wall mount Pad
Back Cover
Standard screw:
Max.8mm
NOTE
Use the screws specified by the VESA standard.
yy
The wall mount kit includes the installation guide and
yy
all necessary parts.
The wall mounting bracket is optional. The accessories
yy
can be purchased at your local retail store.
The length of the screw may differ for each wall
yy
mounting bracket. Ensure the correct length screw is
used.
For more information, please refer to the user manual
yy
for the wall mounting bracket.
14
USING THE MONITOR SET
ENGLISH
Connecting to a PC
Your Monitor set supports Plug & Play*.
yy
*Plug & Play: A PC recognizes a connected device that
users connect to a PC and turn on, without device
configuration or user intervention.
DVI-D connection
Transmits a digital video signal from your PC to the Monitor set.
Connect the PC and the Monitor set with a DVI cable as shown
in the following illustrations.
D-SUB connection
Transmits analog video from your PC to the Monitor set.
Connect the PC and the Monitor set with the supplied D-sub
15 pin signal cable as shown in the following illustrations.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and the
Monitor set with the HDMI cable as shown in the following
illustrations.
NOTE
When using a D-Sub signal input cable connector for
yy
Macintosh
NOTE
Mac adapter
yy
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row)
D-SUB VGA connector on the supplied cable to a 15
pin 2 row connector.
If you use HDMI PC, it can cause compatibility problem.
yy
Use a certified cable with the HDMI logo attached. If
yy
you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable - High-Speed HDMI®/TM Cable with Ethernet
15
CAUTION
HDMI connection
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
NOTE
When you want to use two PC in our Monitor, please
yy
connect the signal cable(D-SUB/DVI-D/HDMI)
respectively in Monitor set.
If you turn the Monitor set on while it is cold, the
yy
screen may flicker. This is normal.
Some red, green, or blue spots may appear on the
yy
screen. This is normal.
NOTE
If you use HDMI PC, it can cause compatibility problem.
yy
Use a certified cable with the HDMI logo attached. If
yy
you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
ENG
ENGLISH
Connect the signal input cable and
yy
tighten it by turning the screws
clockwise.
Do not press the screen with
yy
your finger for a long time as this may result in
temporary distortion on the screen.
Avoid displaying a fixed image on the screen for a
yy
long period of time to prevent image burn. Use a
screensaver if possible.
Connecting to AV Devices
16
Connecting to External Devices
ENGLISH
Peripheral device connection
Connect peripheral devices to the monitor using headphone
ports.
(sold separately)
NOTE
Peripheral devices are sold separately.
yy
Cables with angled plugs may have clearance issues,
yy
use straight plugs when possible.
Angle Type
Straight Type
NOTE
Headphones or speakers may not work normally,
yy
depending on the server PC settings.
17
CUSTOMIZING SETTINGS
ENG
ENGLISH
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off the monitor
this way at any time, including when the OSD is on.)
◄
►
▲
▼
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the menu features.
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the input feature.
Main menu disabled
Enables the main menu.
Main menu enabled
Enters the Picture Mode feature.
Main menu disabled
Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Picture Mode
Picture Mode
Main Menu
Description
Menu
Configures the screen settings.
Picture Mode
Select picture mode to achieve the best display effect.
PicturePicture
Mode Mode
Input
You can operate the change of input sig­nals.
• When two input signals over are con­nected and select the input
menu, input signal(D-SUB/DVI-D/HDMI) will be changed sequentially.
• When only one signal is connected, it is automatically detected. The
default setting is D-SUB.
Monitor off
Turns off the monitor.
Exit
Exits the main menu.
Picture Mode
18
Customizing settings
ENGLISH
ENG
Menu Settings
-Quick Settings
1 To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Quick Settings > Brightness by moving the joystick.
2
3 Configure the options following the instructions that ap4
5
pear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > Quick Settings
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume.
NOTE
You can adjust Mute/ Unmute by moving the joystick button to ▼ in
yy
the Volume menu.
Ratio
Adjusts the screen ratio.
SMART ENERGY
SAVING
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
High
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient function.
Off
Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
NOTE
The display may look the same for Wide, Original options at the recommended resolution (1920 x 1080).
yy
The ratio is disabled in the interlaced signal.
yy
NOTE
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If option of
yy
SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.
19
-Picture
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
Go to Picture by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
the bottom right corner.
To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > Picture
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright,
you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want screen more bright, you
can control brightness in Menu OSD.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Color
Weakness
This mode is for users who cannot distinguish between red and green.It enables users with color weakness to easily distinguish between the two colors.
Game
Optimizes the screen for gameplay.
NOTE
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this
yy
function.
This function can’t distinguish some colors in some images.
yy
20
Picture Adjust
SUPER RESOLUTION+
ENGLISH
ENG
High
Optimized picture quality is displayed when a user wants crystal
clear images. It is effective forhigh quality video or game.
Middle
The optimized picture quality is displayed when a user wants images
between low and highmodes for comfortable viewing. It is effective
for UCC or SD video.
Low
The optimized picture quality is displayed when a user wants smooth
and natural images. It iseffective for slow-moving pictures or still
images.
Off
Select this option for everyday viewing. SUPER RESOLUTION+ is
turned off in this mode.
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
Response Time
Overscan
DFC
yy Offset: as a reference for a video signal, this is the darkest color
the monitor can display.
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the
current contrast ratio of the screen.
Sets a response time for displayed pictures based on the speed of the screen. For
a normal environment, it is recommended that you use Normal. For a fast-moving
picture, it is recommended that you use High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Sets the response time to Off.
On
To select the range of output image for DTV timing in HDMI
input.(only for HDMI input)Recommend Overscan function
to turn on when connect AV equipment.
Off
Disables the Overscan feature.
On
Adjusts the brightness automatically according to the screen.
Off
Disables the DFC feature.
Black Stabilizer
Black Stabilizer
: You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen.
(You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the
dynamic contrast on the screen.
FreeSync
Provides seamless and natural images by synchronizing the vertical frequency of the
input signal with that of the output signal.
NOTE
yyTo use the FreeSync feature, a graphic card that supports FreeSync is
necessary.
yySupported Interface: HDMI
yyFor more information, refer to AMD website at http://www.amd.com/FreeSync
On
FreeSync function on.
Off
FreeSync function off.
21
Color Adjust
The higher the gamma value, the darker the image becomes. Likewise, the lower
the gamma value, the lighter the image becomes. If you do not need to adjust the
gamma settings, select Off.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom
Red
Green
Blue
Six Color
You can customize the picture color using Red, Green, and Blue
colors.
Meets the user requirements for colors through adjusting the color and saturation
of the six colors(Red_Hue, Red_Saturation, Green_Hue, Green_Saturation, Blue_Hue,
Blue_Saturation, Cyan_Hue, Cyan_Saturation, Magenta_Hue, Magenta_Saturation,
Yellow_Hue, Yellow_Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the value, less
saturated and bright the colors become. The higher the value, the more saturated
and dark the colors become.
Display
Reset
Returns the color settings to the default settings.
Horizontal
To move image left and right.
Vertical
To move image up and down.
Clock
To minimize any vertical bars or stripes visible on the screen background.The
horizontal screen size will also change.
Phase
To adjust the focus of the display. This item allows you to remove any horizontal
noise and clear or sharpen the image of characters.
ENG
ENGLISH
Gamma
22
-General
ENGLISH
ENG
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
Go to General by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
the bottom right corner.
To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > General
Description
Language
To choose the language in which the control names are displayed.
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
The power indicator is automatically turned on.
Off
The power indicator is turned off.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
Resolution
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set
to the following(D-SUB only).
NOTE
The function is enabled only when the screen resolution on your computer is set to the following, except
that the PC output wrong resolution.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
1440x900, 1600x900,Off
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input,
and General are disabled.
Off
Key input is enabled.
23
-Auto Configuration
Do you want to Auto Confuguration?
bottom of the monitor and then enter the Menu.
Go to Auto Configuration by moving the joystick.
2
3 Configure the options following the instructions that ap4
5
pear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If
you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > Auto Configuration
Description
Do you want to Auto Confuguration?
Yes
Operate the Auto configuration for optimal display in D-SUB.
Cancel
Cancel the select.
NOTE
This function will be enable only in analog input.
yy
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at the
24
-Reset
ENGLISH
ENG
joystick button at the bot1 To view the OSD menu, pressDothe
you want to Auto Confuguration?
tom of the monitor and then enter the Menu.
Go to Reset by moving the joystick.
2
3 Configure the options following the instructions that appear in
4
5
the bottom right corner.
To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Returns to the default settings.
Cancel
Cancel the select.
25
TROUBLESHOOTING
No image appears
Is the power cord of the display
connected?
yy Check and see if the power cord is connected properly to the power outlet.
Is the power indicator light on?
yy Press the Power button.
yy If the display is in power saving mode, try moving the mouse or pressing any key on
the keyboard to bring up the screen.
y
y Try to turn on the PC.
yy This message appears when the signal from the PC (video card) is out of horizontal
or vertical frequency range of the display. See the 'Specifications' section of this
manual and configure your display again.
Is the power indicator flickering?
Do you see an "Out of Range"
message on the screen?
Do you see a "NO SIGNAL" message on yy After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
the screen?
yy This is displayed when the signal cable between the PC and the monitor is
missing or disconnected. Check the cable and reconnect it.
Can 't you control some functions in OSD?
Can't you select some menu in
OSD?
yy You can unlock the OSD controls at any time by entering the OSD lock menu and
changing items to off.
Display image is incorrect
Display Position is incorrect.
yy Enter the Auto Configuration function and select the "Yes" item to automatically
adjust your display image to the ideal setting.
On the screen background, vertical
bars or stripes are visible.
yy Enter the Auto Configuration function and select the "Yes" item to automatically
adjust your display image to the ideal setting.
Any horizontal noise appearing in any
image or characters are not clearly
portrayed.
yy Enter the Auto Configuration function and select the "Yes" item to automatically
adjust your display image to the ideal setting.
y
y Check Control Panel ► Display ► Settings and adjust the display to the
recommended resolution or adjust the display image to the ideal setting. Set
the color setting higher than 24 bits (true color).
ENG
ENGLISH
Check the following before calling for service.
26
CAUTION
ENGLISH
ENG
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the
yy
video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed,
yy
truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be
yy
supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
Display image is incorrect
The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if
necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the recommend
resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
yy Be sure to install the display driver from the display driver CD (or diskette) that
comes with your display. Or, you can also download the driver from our web site:
http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering.
Change the resolution to the recommended resolution 1080P.
27
‌SPECIFICATIONS
Display
Sync Input
Video Input
Resolution
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.24795 mm x 0.24795 mm (Pixel Pitch)
Horizontal Frequency
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
Vertical Frequency
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI )
Input Form
Separate Sync. Digital
Signal Input
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power Consumption
On Mode : 13.7 W Typ. (ENERGY STAR® standard ) *
17.6 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
1.3 A
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
491.2 mm x 387.7 mm x 186.8 mm
Without Stand
491.2 mm x 293.3 mm x 91.7 mm
Weight
2.8 kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum resolution)
ENG
ENGLISH
22MP68VQ
28
‌SPECIFICATIONS
23MP68VQ
ENGLISH
ENG
Display
Sync Input
Video Input
Resolution
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.2652 mm x 0.2652 mm (Pixel Pitch)
Horizontal Frequency
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
Vertical Frequency
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI )
Input Form
Separate Sync. Digital
Signal Input
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power Consumption
On Mode : 13.9 W Typ. (ENERGY STAR® standard ) *
19.1 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
1.3 A
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
523.9 mm x 406.1 mm x 186.8 mm
Without Stand
523.9 mm x 311.7 mm x 91.7 mm
Weight
3.1 kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum resolution)
29
‌SPECIFICATIONS
24MP68VQ
Sync Input
Video Input
Resolution
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.2745 mm x 0.2745 mm (Pixel Pitch)
Horizontal Frequency
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
Vertical Frequency
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI )
Input Form
Separate Sync. Digital
Signal Input
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power Consumption
On Mode : 17.1W Typ. (ENERGY STAR® standard ) *
21 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1021-23, manufactured by Lite-On Technology Corporation
or Type WA-24C19FS, manufactured by Asian Power Devices Inc.
or Type WA-24C19FU, manufactured by Asian Power Devices Inc.
or Type WA-24C19FK, manufactured by Asian Power Devices Inc.
or Type WA-24C19FB, manufactured by Asian Power Devices Inc.
or Type WA-24C19FN, manufactured by Asian Power Devices Inc.
or Type DA-24B19, manufactured by Asian Power Devices Inc.
1.3 A
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
541.7 mm x 416.2 mm x 186.8 mm
Without Stand
541.7 mm x 321.8 mm x 91.9 mm
Weight
3.3 kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum resolution)
ENG
ENGLISH
Display
30
‌SPECIFICATIONS
27MP68VQ
ENGLISH
ENG
Display
Sync Input
Video Input
Resolution
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.3114 mm x 0.3114 mm (Pixel Pitch)
Horizontal Frequency
30 kHz to 85 kHz (HDMI )(FreeSync on)
30 kHz to 83 kHz (HDMI )(FreeSync off)
30 kHz to 83 kHz (D-SUB)
30 kHz to 83 kHz (DVI)
Vertical Frequency
40 Hz to 75 Hz (HDMI)(FreeSync on)
56 Hz to 75 Hz (HDMI)(FreeSync off)
56 Hz to 75 Hz (D-SUB)
56 Hz to 75 Hz (DVI )
Input Form
Separate Sync. Digital
Signal Input
15 pin D-SUB Connector/DVI-D Connector (Digital)
HDMI Connector
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
1920 x 1080 @ 75 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
Plug & Play
DDC 2B(Analog,Digital,HDMI)
Power Consumption
On Mode : 17.6 W Typ. (ENERGY STAR® standard ) *
25.1 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-32FSG-19 19032EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PA-1031-23, manufactured by Lite-On Technology Corporation
1.6 A or 19 V
OUTPUT: 19 V
1.3 A
1.7 A
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-25FSG-19 19025EPCU-1L, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP51, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V
1.3 A
Dimensions
(Width x Height x
Depth)
With Stand
613.8 mm x 457.4 mm x 204.6 mm
Without Stand
613.8 mm x 363.0 mm x 92.0 mm
Weight
5.0 kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
Less than 80%
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard ( Full White pattern , Maximum resolution)
31
Preset Modes (Resolution)
ENG
ENGLISH
D-SUB/DVI-D/HDMI PC Timing
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical Frequency(Hz) Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
79.976
75
+/+
1680 x 1050
65.290
60
-/+
1920 x 1080
67.500
60
+/+
Recommend Mode
1920 x 1080
83.89
75
+/+
FreeSync on
HDMI Timing(Video)
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
1080P
56.25
50
O
1080P
67.50
60
O
Recommend Mode
Indicator
Mode
LED Color
On Mode
White
Sleep Mode
Blinking White
Off Mode
Off
HDMI
Make sure to read the Safety Precautions before using the product.
Keep the Owner’s Manual (CD) in an accessible place for future
reference.
The model and serial number of the SET is located on the back and one
side of the SET. Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR® is a set of power-saving guidelines
issued by the U.S.Environmental Protection Agency
(EPA).
As an ENERGY STAR® Partner LGE U. S. A., Inc. has
determined that this product meets the ENERGY
STAR® guidelines for energy efficiency.
Refer to ENERGYSTAR.gov for more information on the ENERGY
STAR® program.
Download PDF

advertising