LG | 28TK430V-PT | LG 28TK430V-PT Owner’s Manual

*MFL70383002*
(1712-REV00)
www.lg.com
LK50*
TK43**
1
2
a
b
L
R
a
AAA
X4
(M4 x L16)
32LK50*
28TK43**
b
X4
(M4 x L18)
43LK50*
3
4
VIDEO L/MONO AUDIO R
L/MONO AUDIO R
PR
PB
VIDEO/Y
2
A
E
AUDIO
D
B
G
F
C
VIDEO
PR L/MONO AUDIO R
1
VIDEO/Y
PB
0
B
A
C
(mm /
32LK500BPTA
32LK500BYTA
43LK5000PTA
43LK5000YTA
/
F
F
)
(kg /
G
)
474
182.8
436
75.8
3.9
3.8
968
625
217.8
569
82.3
7.1
6.9
425
183
385
76
3.3
3.2
/
/
E
729
634
28TK430V-PT
D
/
/
/
AC 100-240 V ~ 50 / 60 Hz
OWNER’S MANUAL
Safety and Reference
LED TV*
*LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
*MFL70344704*
(1712-REV00)
www.lg.com
Copyright ⓒ 2018 LG Electronics Inc. All Rights Reserved.
Warning! Safety instructions
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
• Do not place the TV and/or remote control in the following
environments:
-- Keep the product away from direct sunlight.
-- An area with high humidity such as a bathroom
-- Near any heat source such as stoves and other devices that
produce heat.
-- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil.
-- An area exposed to rain or wind.
-- Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
-- Near flammable objects such as gasoline or candles, or expose
the TV to direct air conditioning.
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.
2
• Ventilation
-- Install your TV where there is proper ventilation. Do not install in
a confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials
while unit is plugged in.
• Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become hot.
• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the device.
• Do not move the TV whilst the Power cord is plugged in.
• Do not use a damaged or loosely fitting power cord.
• Be sure do grasp the plug when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
• Do not connect too many devices to the same AC power outlet as
this could result in fire or electric shock.
• Disconnecting the Device from the Main Power
-- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
• Outdoor Antenna Grounding (Can differ by country):
-- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code,
ANSI/NFPA 70
• Batteries
-- Store the accessories (battery, etc.) in a safe location out of the
reach of children.
-- Do not short circuit, disassemble, or allow the batteries to
overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat.
• Moving
-- When moving, make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front panel
of the TV. Otherwise, this may result in product damage, fire
hazard or injury.
• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
• Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen.
• Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
cause damage to screen.
• Cleaning
-- When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner,
any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.
ENGLISH
• Grounding (Except for devices which are not grounded.)
-- TV with a three-prong grounded AC plug must be connected to
a three-prong grounded AC outlet. Ensure that you connect the
earth ground wire to prevent possible electric shock.
• Never touch this apparatus or antenna during a lightning storm.
You may be electrocuted.
• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and
in extreme cases a fire may break out.
• Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service.
• Do not touch the end of the power cord while it is plugged in. You
may be electrocuted.
• If any of the following occur, unplug the product
immediately and contact your local customer service.
-- The product has been damaged.
-- If water or another substance enters the product (like an AC
adapter, power cord, or TV).
-- If you smell smoke or other odors coming from the TV
-- When lightning storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power
source is connected to the unit if not unplugged in.
• Do not use high voltage electrical equipment near the TV (e.g., a
bug zapper). This may result in product malfunction.
• Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to
operate this product.
• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.
• Never disassemble the AC adapter or power cord. This may result in
fire or electric shock.
• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
• To reduce the risk of fire or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust off.
3
Preparing
Separate Purchase
ENGLISH
• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
• The available menus and options may differ from the input source
or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button,
turning off the device and unplugging the power cord.
• The items supplied with your product may vary depending on the
model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports
if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
* A <
= 10 mm
* B <
= 18 mm
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
-- High-Speed HDMI®/TM Cable (3 m or less)
-- High-Speed HDMI®/TM Cable with Ethernet (3 m or less)
4
Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
(Depending on model)
Wall Mounting Bracket
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
A
B
Model
VESA (A x B) (mm)
Standard screw
Number of screws
32LK50*
100 x 100
M4
4
Wall mount bracket LSW140B
Model
VESA (A x B) (mm)
Standard screw
Number of screws
Wall mount bracket
28TK43**
100 x 100
M4
4
RW120
43LK50*
200 x 200
M6
4
LSW240B
MSW240
Lifting and moving the TV
• It is recommended to move the TV in the box or packing material
that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and
all cables.
• When holding the TV, the screen should face away from you to
avoid damage.
• Hold the side and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
ENGLISH
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
•• Avoid touching the screen at all times, as this may result in
damage to the screen.
•• Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.
•• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the
following illustration.
(Depending on model)
2 Connect the power cord to a wall outlet.
• When transporting the TV, do not expose the TV to jolts or
excessive vibration.
• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
• Do not apply excessive pressure to cause flexing / bending of frame
chassis as it may damage screen.
• When handling the TV, be careful not to damage the protruding
buttons.
5
ENGLISH
•• Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
•• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
•• Do not use any unapproved items to ensure the safety and
product life span.
•• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer’s warranty.
•• Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten
correctly.
•• If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
-- Using cabinets or stands recommended by the
manufacturer of the television.
-- Only using furniture that can safely support the
television.
-- Ensuring the television is not overhanging the edge of
the supporting furniture.
-- Not placing the television on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television to a suitable
support.
-- Not standing the televisions on cloth or other
materials placed between the television and
supporting furniture.
-- Educating children about the dangers of climbing on
furniture to reach the television or its controls.
6
Securing TV to the Wall
(Depending on model)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the
location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
• Use a platform or cabinet that is strong and large enough to
support the TV securely.
• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Mounting to the Wall
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.
Connections
10 cm
ENGLISH
10 cm
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
m
10 c
10 cm
Antenna/Cable
10 cm
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
(Depending on model)
•• Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse.
•• For more information of screws and wall mount bracket,
refer to the Separate Purchase.
•• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as
not to drop.
•• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the
back of the TV.
•• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
•• Screw length from outer surface of back cover should be
under 8 mm. (Only 28TK43**, 32LK50*)
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
HDMI
• Supported HDMI Audio format (Depending on model) :
AC3 (32 KHz/44.1 KHz/48 KHz),
PCM (32 KHz/44.1 KHz/48 KHz/96 KHz)
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max. 8 mm
7
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
ENGLISH
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the
TV port.
• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
• Refer to the external equipment’s manual for operating
instructions.
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
• In PC mode, some resolution settings may not work properly
depending on the graphics card.
•• Do not drop the product or let it fall over when connecting
external devices. Otherwise, this may result in injury or
damage to the product.
•• When connecting external devices such as video game
consoles, make sure the connecting cables are long
enough. Otherwise, the product may fall over, which may
cause injury or damage the product.
8
Using Button
You can simply operate the TV functions, using the button. (Depending
on model)
Basic functions
Power On / Off (Press)
Using Remote Control
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
•• In Analogue TV and some countries, some remote
control buttons may not work.
Make sure to point the remote control toward the remote control sensor
on the TV.
ENGLISH
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
(POWER) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Audio descriptions function will be enabled. (Depending on
model)
Resizes an image.
(INPUT) Changes the input source.
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
(MUTE) Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
Teletext buttons (
) These buttons are used for
teletext.
(HOME) Accesses the Home menu.
(Settings) Accesses the Settings menu.
Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and confirms your input.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Views the information of the current programme and screen.
Starts to record and displays record menu. (Only Time
MachineReady supported model) (Depending on model)
Control buttons (
) Controls media contents.
These access special functions in some menus.
•• Do not mix new batteries with old batteries. This may
cause the batteries to overheat and leak.
•• Failure to match the correct polarities of the battery
may cause the battery to burst or leak, resulting in fire,
personal injury, or ambient pollution.
•• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
•• Batteries inside or inside the product shall not be exposed
to excessive heat such as sunshine, fire or the like.
(Some buttons and services may not be provided depending on models
or regions.)
9
Settings
Fine-tuning Picture Mode
(Settings)
ENGLISH
Automatically Setting Up Programme
(Settings)
Programmes
Auto Tuning
Automatically tunes the programmes.
• If Input Source is not connected properly, programme registration
may not work.
• Auto Tuning only finds programmes that are currently
broadcasting.
• If Lock System is turned on, a pop-up window will appear asking
for password.
• Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
To select Picture Mode
(Settings)
Mode
Picture
Picture Mode Settings
Picture
Select the picture mode optimized for the viewing environment or the
programme.
• Vivid : Heightens contrast, brightness and sharpness to display
vivid images.
• Standard : Displays images in standard levels of contrast,
brightness and sharpness.
• /APS : [Depending on model]
The Energy Saver feature changes settings on the TV to reduce
power consumption.
• Cinema/Game : Displays the optimum picture for movie, game.
• Soccer : [Depending on model]
Optimizes the video image for high and dynamic actions by
emphasizing primary colours such as white, grass, or sky blue.
• Depending on input signal, available range of picture modes may
differ.
10
Picture
Picture Mode Settings
This feature allows you to adjust the selected picture mode in detail.
• Backlight : Controls the level of screen brightness by adjusting the
backlight. The closer to 100, the brighter the screen.
• Contrast : Adjusts the contrast of the bright and dark areas of the
picture. The closer to 100, the higher the contrast.
• Brightness : Adjusts the overall screen brightness. The closer to
100, the brighter the screen.
• Sharpness : Adjusts the sharpness of the image. The closer to 50,
the sharper and clearer the image.
• Colour : Tones down or up the colours displayed on the screen. The
closer to 100, the deeper the colour.
• Tint : Adjusts the colour balance between red and green displayed
on the screen. The closer to Red 50, the more red the colour will be.
The closer to Green 50, the more green the colour will be.
• Colour Temperature : Adjusts the colour temperature from cold
to warm.
• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To set advanced controls
(Settings) Picture Picture Mode Settings
Controls / Expert Controls
Advanced
Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen.
• Dynamic Contrast : Adjusts the contrast to the optimal level
according to the brightness of the image.
• Dynamic Colour : Adjusts colours to make the image appear in
more natural colours.
• Gamma : Sets the gradation curve according to the output of
picture signal in relation to the input signal.
• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To set additional picture options
(Settings)
Options
Picture
Picture Mode Settings
To use Energy Saving feature
Picture
Picture
Energy Saving
• Noise Reduction : Eliminates noise in the picture.
• Digital Noise Reduction : Eliminates noise generated while
creating digital picture signals.
• Black Level : Adjusts the brightness and contrast of the screen
to suit the black level of the input picture by using the blackness
(black level) of the screen.
• Real Cinema : Optimizes the screen for movie viewing.
• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
Picture Mode Settings
To use Picture Test
(Settings)
Picture
Picture Test
First of all, start the Picture Test to see whether the video signal
output is normal, and then select whether there is an error.
Resetting picture settings
Picture
• Off : Turns off the Energy Saving mode.
• Minimum / Medium / Maximum : Applies the pre-set Energy
Saving mode.
• Screen Off : Screen is turned off and only sound is played. Press
any button except Power button on the remote control to turn the
screen back on.
Picture
If there are no problems in the test, check the connected external device
or broadcast signal.
Resets picture settings that the user customizes. Each picture mode is
reset. Select the picture mode you wish to reset.
Selecting Sound Mode
To adjust Aspect Ratio
Adjusts TV audio to an optimal level based on a selected sound mode.
(Settings)
(Settings)
Picture
ENGLISH
Adjusts detailed setting for images.
(Settings)
Reset
(Settings)
Reduces power consumption by adjusting screen brightness.
Aspect Ratio
Selects the screen aspect ratio.
• Original : Changes the aspect ratio to 4:3 or 16:9 depending on
the input video signal.
• 4:3 : Displays an aspect ratio of 4:3.
• 16:9 : Displays an aspect ratio of 16:9.
• 14:9 : You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed in the
same way as in 4:3, but is moved up or down.
• Zoom : Resizes images to fit the screen width. The top and bottom
parts of the image may be cut off.
• Full Wide : When TV receives the wide screen signal, it will let you
adjust the picture horizontally or vertically, in a linear proportion,
to fill the entire screen fully. 4:3 and 14:9 video is supported in full
screen without any video distortion through DTV input.
• In Analogue/DTV/AV/Scart mode, Full Wide is available.
• Just Scan : Displays video images in the original size without
removing parts of the edge of the image.
• In DTV, Component, HDMI, and DVI (over 720p) mode, Just Scan
is available.
• • • • • • Sound
Sound Mode Settings
Sound Mode
Standard : Optimizes the sound for all types of content.
News : Boosts voice clarity from the TV.
Music : [Depending on model] Optimizes the sound for music.
Cinema : Optimizes the sound for cinemas.
Soccer : [Depending on model] Optimizes the sound for sports.
Game : Optimizes the sound for gameplay.
Adjusting audio balance
(Settings)
Sound
Sound Mode Settings
Balance
Adjust the volume of the left and right speakers.
11
Using the Sound Effect function
(Settings)
Sound
Sound Mode Settings
The user can select various sound effects.
ENGLISH
• Treble : Controls the dominant sounds in the output.
• Bass : Controls the softer sounds in the output.
• Reset : Reset the sound effect settings.
• This is only available if Sound Mode is set to Standard.
Sound
Auto Volume
Programmes
Programme Manager
Set as favourite programme, block/unblock programme, skip
programme etc. of the selected programme.
To select Programme mode
Programmes
Programme Mode
[This feature is available on certain models only.]
Sets Auto Volume to On. Varying volume output from programme to
programme is automatically adjusted for convenient TV watching when
clicking through different programme.
This function allows you to watch a tuned programme in Antenna or
Cable.
To use Sound Test
Data Service Function
(Settings)
Sound
Sound Test
Start the Sound Test to check that the sound signal output is normal,
and then select whether there is an error.
If there are no problems in the test, check the connected external device
or broadcast signal.
Using Manual Tuning
(Settings)
Programmes
Manual Tuning
Adjusts programmes manually and saves the results.
12
(Settings)
Edits the saved programmes.
(Settings)
To set Auto Volume
(Settings)
Editing programmes
• You can only watch programmes in the selected mode.
(Settings)
Programmes
Data Service
[This feature is available in certain countries only.]
This function allows users to choose between MHEG (Digital Teletext)
and Teletext if both exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled regardless
of which option you selected.
To use Signal Test
(Settings)
Programmes
Signal Test
For digital broadcasting, signal strength and signal quality can be
checked.
[This function is available on certain models or in certain countries only]
For analogue broadcasting, you can set up station names and use
fine tuning (except for Satellite mode). Normally fine tuning is only
necessary if reception is poor.
Signal test is only available in Antenna or Cable mode.
Shows the MUX and Service information etc..
To set Language
(Settings)
General
To set current time
Language
• Menu Language : Selects a language for the display text.
• Primary Audio Language / Secondary Audio Language :
[In Digital mode Only][The configurable items differ depending
on country.] Selects the desired language when watching digital
broadcasting containing several voice languages.
• Teletext Language : [In Digital mode Only][The configurable
items differ depending on country.] Use the Text language function
when two or more Text languages are broadcast.
• If teletext data in a selected language is not broadcast, the
default Text language will be displayed.
• If you select the wrong local country, teletext may not appear
correctly on the screen and some problems may occur during
teletext operation.
General
General
Time & Date
• Set Automatically : Synchronizes the TV clock to the digital time
information sent by the TV station.
• Time / Date / Time Zone : [Depending on Country] Sets the time
and date manually if the auto setup does not correspond to the
current time.
• Custom Time Zone : [Depending on Country] When select the
Custom in Time Zone, Custom Time Zone menu is activated.
To use Sleep Timer
(Settings)
General
Timers
Sleep Timer
Turns off the TV after a preset number of minutes.
To cancel the Sleep Timer, select Off.
To set the TV to turn on and off automatically
Setting the Location
(Settings)
(Settings)
Checks or changes the time while watching TV.
ENGLISH
You can select the language of the menu displayed on the screen and
the digital sound broadcasting.
Broadcast Country
[This feature is available in certain countries only.]
Sets the country that the TV uses.
TV settings are changed according to the broadcast environment of the
selected country.
• If the country setting is changed, the Auto Tuning information
screen may appear.
• In a country that Digital broadcasting regulation isn’t fixed, some
DTV functions may not work depending on digital broadcasting
circumstances.
(Settings)
Power Off
General
Timers
Timer Power On / Timer
You can set the Power On/Off time for the TV.
Select Off if you are not going to set Timer Power On / Timer Power
Off.
• To use Timer Power On / Timer Power Off, set the current time
correctly.
• Even when the Timer Power On function is on, the TV will turn
off automatically in 120 minutes when no button is pressed within
that time.
13
To set Auto Power Off
(Settings)
General
To lock system
Timers
Auto Power Off
[This function is available on certain models or in certain countries only]
ENGLISH
If you do not press any button on the TV or remote control for a certain
period, the TV will automatically switch to standby mode.
• This function does not work on Store Mode or while Software
Update.
Changing the TV Mode
(Settings)
General
Home/Store Mode
Selects Home Mode or Store Mode.
When in use in home, please select Home Mode.
Store Mode is for store display.
(Settings)
Safety
Lock System
Permits only specific programmes by blocking programmes or external
input.
First set Lock System to On.
• Programme Locks : Blocks programmes with content
inappropriate for children. Programmes can be selected but
the screen is blank and the audio is muted. To watch a locked
programme, enter the password.
• TV Rating Locks : This function operates according to information
from the broadcaster. Therefore if the signal has incorrect
information, this function does not operate. Prevents children from
watching certain adult TV programmes according to the ratings
limit set. Enter a password to watch a blocked programme. Ratings
differ by country.
• Input Block : Block the input sources.
To specify Factory Reset
(Settings)
General
Reset to Initial Settings
All stored information is deleted and TV settings are reset.
TV turns itself off and back on, and all settings are reset.
• When Lock System is in place, a pop-up window appears and asks
for password.
• Do not turn off the power during initialization.
General
(Settings)
About This TV
For information on requesting service, refer to the TV’s menu.
Safety
Set Password
Sets or changes the TV password.
The initial password is set to ‘0000’.
To set Subtitle
(Settings)
Requesting service
(Settings)
To set password
Accessibility
Subtitles
View subtitles when the TV station provides subtitled programming.
Change Subtitles to On and select subtitle setting.
• Applies to digital broadcasting.
To set Hard of Hearing
(Settings)
Accessibility
Hard of Hearing
[This feature is available in certain countries only.]
This function is used for the hearing impaired. If it is set to on, the
subtitle is displayed by default.
14
To set Audio Description
(Settings)
Accessibility
My Media supporting file
Audio Description
To use My Media
Connect the USB storage device to the TV’s
terminal.
Selects a file from the list. Displays the file that you choose.
Sets play related settings by checking option during disk playback.
To remove the USB device
USB Device
Select a USB storage device that you want to remove.
When you see a message that the USB device has been removed,
separate the device from the TV.
• Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
• External supported subtitle formats : .srt (SubRip), .ass/.ssa
(SubStation Alpha), .smi (SAMI), .sub (SubViewer1, MicroDVD,
DVDsubtitleSystem, SubIdx(Vobsub)), .txt (TMplayer)
• Internal supported subtitle formats: .dat/.mpg/.mpeg/.vob
(DVD Subtitle), .ts/.trp/.tp (DVB Subtitle), .mp4 (DVD Subtitle,
UTF-8 Plain Text), .mkv (ASS, SSA, UTF-8 Plain Text, VobSub, DVD
Subtitle), .avi (XSUB, XSUB+)
1 SubViewer : Supports subtitles generated SubViewer 1.0 & 2.0 Only
Supported Video Formats
• Maximum : 1920 x 1080 @ 30p (Only Motion JPEG 640 x 480 @
30p)
Extension
.mpg, .mpeg
.avi
.ts
.mov, .mkv
Using a USB storage device - warning
• If the USB storage device has a built-in auto recognition
programme or uses its own driver, it may not work.
• Some USB storage devices may not work or may work incorrectly.
• Use only USB storage devices formatted with the Windows FAT32
or NTFS File System.
• For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
• It is recommended that you use USB memory sticks of 32 GB or less
and USB HDDs of 2 TB or less.
• If a USB HDD with power-saving function does not work properly,
turn the power off and on. For more information, refer to the user
manual of the USB HDD.
• Data in the USB storage device can be damaged, so be sure to back
up important files to other devices. Data maintenance is the user’s
responsibility and the manufacturer is not responsible for data loss.
ENGLISH
This function is for the blind, and provides explanatory audio describing
the current situation in a TV programme in addition to the basic audio.
When Audio Description is selected On, basic audio and Audio
Description are provided only for those programmes that have Audio
Description included.
.dat
.mp4
.vob
.flv
Codec
Video MPEG-1, MPEG-2
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video MJPEG, MPEG-4, H.263, XVID, H.264
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video
MPEG-2, H.264
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video
MPEG-4, H.263, H.264
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video
MPEG-1
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video
MPEG-4, H.264, MPEG-1, MPEG-2
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video
MPEG-2
Audio MPEG1/2 Layer3, AC3, AAC, LPCM
Video
Sorenson H.263, H.264
Audio MPEG1/2 Layer3, AAC
15
Supported Audio Formats
Extension
ENGLISH
.mp3
.ac3
Item
Info
Bit rate 32 Kbps - 320 Kbps
Sample rate 16 kHz - 48 kHz
Support
MPEG1/2 Layer3
Bit rate
32 Kbps - 640 Kbps
Sample rate 32 KHz, 44.1 KHz, 48 KHz
Support
.m4a/.aac
.flac
.wav
.flv
Extension
.jpg
.jpeg
AC3
Sample rate 8 kHz - 48 kHz
Support
AAC
Bit rate
<1.6 Mbps
Sample rate 8 kHz - 48 kHz
Support
FLAC
Bit rate
64 Kbps ~ 1.5 Mbps
.bmp
Sample rate 8 kHz - 48 kHz
Support
PCM
Bit rate
8 Kbps ~ 320 Kbps
Sample rate 16 kHz - 48 kHz, 8 kHz - 48 kHz
Support
MPEG1/2 Layer3, AAC
• When moving to a folder containing videos while playing music,
the music may stop playing.
16
Supported Photo Formats
.png
Item
Resolution
Available file
Progressive JPEG
type
Minimum : 2 (W) x 2 (H),
Photo size
Maximum : 1,024 (W) x 768 (H)
Available file
Baseline JPEG
type
Minimum : 2 (W) x 2 (H),
Photo size
Maximum : 15,360 (W) x 8,640 (H)
Available file
BMP
type
Minimum : 2 (W) x 2 (H),
Photo size
Maximum : 9,600 (W) x 6,400 (H)
Pixel
1/4/8/16/24/32 bpp
Depth
Available file
Interlace, Non-Interlace
type
Minimum : 2 (W) x 2 (H)
Maximum (Interlace) : 1,200 (W)
Photo size x 800 (H),
Maximum (Non-Interlace) : 9,600
(W) x 6,400 (H)
• BMP and PNG format files may be slower to display than JPEG
Troubleshooting
Cannot control the TV with the remote control.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the auto-off function is activated on the settings related
time.
• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), no signal is detected.
• Turn the TV off/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.
• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability of
the product. This phenomenon also occurs in third-party products
and is not subject to exchange or refund.
• You may find different brightness and color of the panel depending
on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.
• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for
a long period of time.
ENGLISH
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
Abnormal Display
Generated Sound
• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due
to temperature and humidity. This noise is common for products
where thermal deformation is required.
• Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending
on the product. This generated sound does not affect the
performance and reliability of the product.
17
Specifications
(Depending on country)
ENGLISH
Broadcasting Specifications
Digital TV
(Depending on Country & Model)
Analogue TV
(Depending on Country)
PAL B/G, PAL D/K, PAL-I,
SECAM-B/G, SECAM-D/K, NTSC-M
Television system
DVB-T/T2
Programme coverage
VHF, UHF
VHF, UHF, CATV
Maximum number of storable
programmes
600
200
External antenna impedance
75 Ω
Environment condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)
-- The Energy consumption is measured in accordance with IEC 62087.
• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.
18
HDMI-DTV supported mode
Component port connecting
information
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640 x 480p
31.47
31.5
59.94
60.00
720 x 480p
31.47
31.50
59.94
60.00
44.96
45.00
15.73
15.75
59.94
60.00
59.94
60.00
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(Only 50 Hz / 60 Hz)
1280 x 720p
720(1440) x 480i
720 x 576p
31.25
50.00
1280 x 720p
37.5
50.00
720(1440) x 576i
15.63
50.00
28.125
33.72
33.75
26.97
27.00
33.716
33.75
56.25
67.432
67.50
50.00
59.94
60.00
23.976
24.00
29.976
30.00
50.00
59.94
60.00
1920 x 1080i
1920 x 1080p
720 x 400
640 x 480
800 x 600
1024 x 768
1280 x 720
1280 x 768
1366 x 768
1280 x 9601
1280 x 10241
1280 x 8001
1680 x 10501
1920 x 10801
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.469
31.469
35.156
37.879
48.363
45.0
47.776
49.1
60.0
63.9
49.5
65.2
67.5
70
59.940
56.250
60.317
60.004
60
59.870
60
60
60
59.8
59.9
60
Y
Video output ports on DVD player
Resolution
720 x 480i
720 x 480p
1440 x 576i
720 x 576p
1280 x 720p
HDMI-PC supported mode
Resolution
Component ports on the TV
1920 x 1080i
1920 x 1080p
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
15.73
31.50
16.63
31.50
37.50
45.00
28.13
33.75
56.25
67.50
60.00
60.00
50.00
50.00
50.00
60.00
50.00
60.00
50.00
60.00
ENGLISH
Resolution
1 Only 43LK50*
19
Licenses
Supported licenses may differ by model.
ENGLISH
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
20
Regulatory
ENGLISH
WARNING!
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as :
• • • • Using cabinets or stands recommended by the manufacturer of the television set.
Only using furniture that can safely support the television set.
Ensuring the television set is not overhanging the edge of the supporting furniture.
Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television
set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refer to “ON” (power).
Refers to dangerous voltage.
(Only Jordan)
WEEE
0197
Disposal of your appliance
The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.
0197
21
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
Model
Serial No.
For any Suggestion, Opinion,
Complaints, Please Call
800 54 in UAE
0800 545454 in South Africa
080 100 54 54 in Morocco
19960 in Egypt
021 36 54 54 in Algeria
Other countries, Please contact our
local dealer or log into
http://www.lg.com
Download PDF

advertising