LG | L1952H-SF | LG L1952H-SF Owner’s Manual

User's Guide
L1752H
L1952H
L1752HM
L1952HM
L1752HQ
L1952HQ
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
on
the product and
dealer when you ask for service.
give the information to your
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Safety
only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
Use
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They
replacement.
Do not
the
Open
may result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
display ON when leaving the house.
children
from
Keep
dropping or pushing objects into the display's cabinet
Some
internal
openings.
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
of time. Never leave the
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near
a wet
water such as near a
basement,
Displays are provided with ventilation
generated during operation. If
of heat
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
the Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
speaker
-
The feature is
only
for
speaker
models
-
L1752HM, L1952HM
Connecting the speaker
1. Place the monitor with its front facing downward on a soft cloth.
2. Insert the protruding hook of the speaker in the direction of the slot in the back of the product.
Slot
Hook
Audio DC-In
Cable
3. After setting
up the
speaker,
AUDIO IN
connect the Audio DC-In Cable to the back of the
AUDIO DC-OUT
A3
product.
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the
2.
monitor with its front
Assemble the Stand
Body
downward
facing
into the
product
on a
soft cloth.
in the correct direction
as
shown in the
picture.
Make sure you push it until you hear it "click".
Stand Body
3. Assemble the
4. Once
Stand
Base(Front, Rear) into the
assembled take the monitor up
carefully
Stand
Body
in the correct direction.
and face the front side
Stand Base
Slide
Stand Body
R
A
E
R
REA
R
F
RON
T
REA
R
RON
T
F
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get damaged or injure your foot.
Do not put your hand on the slide to avoid
injury.
A4
product
may
the
Connecting
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel
Tilt
Range:
in various ways for maximum comfort.
-5˚~20˚
20
L1752H / L1752HQ / L1952H / L1952HQ
Height Range
:
maximum 3.94 inch
100
Warning:
(100 mm)
mm
When
not
adjusting height of the monitor, do
put your fingers between monitor and
stand bottom. You may hurt your
fingers.
Ergonomic
It is recommended that in order to maintain
position,
an
ergonomic and comfortable viewing
degrees.
the forward tilt angle of the monitor should not exceed 5
A5
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
L1752HM / L1952HM
Height Range
maximum 2.36 inch
:
(60 mm)
60
Note: When you
Then you
use
use
speakers, be sure to set up the stop cover first
height function, the speakers will not touch the
stop
Stop
cover
Warning:
is
only
for
speaker
cover
models
-
L1752HM, L1952HM
When
not
adjusting height of the monitor, do
put your fingers between monitor and
stand bottom. You may hurt your
A6
fingers.
as
mm
shown.
base
cover.
Connecting
the
Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 1
3. Connect the power cord into a proper power outlet
the
display.
that is
easily accessible
and close to
2
Signal Cable
Power Cord
Analog signal Digital signal
DVI
D-sub
Varies according to model.
NOTE
This is a simplified
of the rear view.
This
rear
representation
view represents
Wall-outlet type
a
2
general model; your display may
differ from the view
as
1
shown.
PC-outlet type
PC
DVI-D(This feature is not available in all countries.)
PC
MAC
Mac adapter
For Apple Macintosh use,
a separate plug adapter is needed to change
pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
the 15
4.
Press
button
on
the side switch
panel
to turn the power
When monitor power is turned on, the 'Self
Function' is executed
on.
Image Setting
automatically.
(Only Analog Mode)
NOTE
'
Self Image
provides the user with optimal display settings.When the user
automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the side panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
Setting
Function'? This function
connects the monitor for the first time, this function
'
A7
Using
the
speakers
-
The feature is
only
for
speaker
models
-
L1752HM, L1952HM
Side Jack
Headphone/Earphone Input
Automatically mutes the speaker volume
when the headphones are plugged in.
Rear
Audio
Input
Connects to the *LINE OUT
jack
of the
PC sound card.
AUDIO
IN
*LINE OUT
Speaker Out
*Line Out
A terminal used to connect to the
speaker including a built-in amplifier
(Amp). Make sure that the connecting
terminal of the PC sound card is checked
before
connecting. If the Audio Out
only Speaker Out,
of PC
sound card has
reduce the PC volume.
If the Audio Out of the PC sound card
supports both Speaker Out and Line Out,
convert to Line Out
<Jack of the PC sound card>
using the card
(Refer to the
of the program
Sound Card Manual).
jumper
A8
Control Panel Functions
Side
Front Panel Controls
Control
Function
Use this button to enter
MENU Button
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings,
so
that
they cannot
be
inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Buttons
Use these buttons to select
Screen Display.
For
SOURCE Hot
key
more
or
adjust functions
in the On
information, refer to page A16.
Use this button to make D-Sub
or
DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub.
A9
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
mode is
17 inch monitor
:
1280
x
1024
19 inch monitor
:
1280
x
1024
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
up green
or
on or
off.
blue when the
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A10
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display,
Press the MENU Button, then the main
To
access a
becomes
Use the
control,
use
highlighted,
/
the
or
making image adjustments.
follow these steps:
menu
of the OSD appears.
Buttons. When the icon you want
press the AUTO/SET Button.
Buttons to
adjust
the
image
to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A11
On Screen
The
and
Display(OSD) Selection
and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
PICTURE
Sub-menu
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
PRESET
sRGB
To customize the color of
6500K
the
screen
9300K
RED
GREEN
BLUE
POSITION
TRACKING
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
improve the clarity and
stability, sharpness of the
PHASE
screen
SHARPNESS
SETUP
LANGUAGE
OSD
HORIZONTAL
To customize the
screen
status for
operating
a
user's
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
FLATRON
MOVIE / TEXT
F-ENGINE
USER
To select
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A12
the model
(A12~A16).
On Screen
Display(OSD) Selection
and
Adjustment
were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
:
:
SET
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages on
A13
the monitor may differ from the manual.
On Screen
Display(OSD) Selection
Main
menu
Sub
and
Adjustment
Description
menu
PICTURE
PICTURE
BRIGHTNESS
To
adjust
the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
brightness
of the
screen.
screen.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
PRESET
COLOR
?
sRGB: Set the screen color to fit the
SRGB standard color
6500K:
9300K:
?
?
specification.
Slightly reddish white.
Slightly bluish white.
RED
Set your
own
red color levels.
Set your
own
green color levels.
Set your
own
blue color levels.
GREEN
MENU : Exit
BLUE
: Decrease
: Increase
SET : Select another sub-menu
POSITION
POSITION
HORIZONTAL
To
move
image
left and
VERTICAL
To
move
image
up and down.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
A14
right.
On Screen
Display(OSD) Selection
Main
menu
Sub
and
Adjustment
Description
menu
TRACKING
CLOCK
TRACKING
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
: Increase
SHARPNESS To adjust the clearness of the screen.
SET : Select another sub-menu
SETUP
LANGUAGE
To choose the
control names
language in which
displayed.
the
are
SETUP
OSD
POSITION
To
adjust position
on
the
WHITE
If the
BALANCE
the
of the OSD window
screen.
output of the video card is different
required specifications,
the color
level may deteriorate due to video
signal distortion. Using this function, the
SETUP
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
POWER
INDICATOR
MENU
:
:
:
Exit
are
present in the
screen.
Use this function to set the power
on the front side of the monitor
indicator
to ON or OFF.
Adjust
Adjust
If you set
OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
SET Select another sub-menu
:
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the
button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A15
only when
On Screen
Display(OSD) Selection
The OSD
right
screen
and
Adjustment
will appear when you touch the
button
on
the
side of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the
non-applied
will appear on the right side.Touch the SET
button to use the adjusted screen.
screen
Main
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
TEXT: For text
USER
adjust
the USER sub-menu
function,
or
movies
User
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different envir
can
You
can save or
...
Press the SET Button
...
USER
...
BRIGHTNESS
videos
images (Word processing etc.)
You
when
To
images in
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
Select the SAVE sub-menu using the SET button
and save the YES value using the buttons.
NORMAL This is under normal
A16
operating
conditions.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator blue or
?
Check and
properly
?
?
see
if the power cord is connected
to the power outlet.
Press the Power button.
Adjust the brightness
and the contrast.
green?
Is the power indicator
amber?
?
If the
the
display is in power saving mode, try moving
pressing any key on the keyboard to
mouse or
bring up the screen.
?TrytoturnonthePC.
Doyouseean"OUTOF
RANGE" message
the screen?
on
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
see a
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
?
This message appears when the signal cable
between your PC and your display is not
connected. Check the
the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
?
MENU button?
?
You
so
they
on
cable and try
again.
the screen?
the current control
cannot be
settings,
inadvertently changed.
unlock the OSD controls at any time
pushing the MENU button for several
You
by
can secure
that
signal
can
seconds: the message
"OSD UNLOCKED" will appear.
A17
Troubleshooting
Display image
Display
is incorrect
Position is
?
incorrect.
?
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
?
vertical
background,
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
?
?
The
screen
mono or
color is
?
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
?
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
abnormal.
in
use a
the slot.
?
Set the color
setting higher than
Settings.
at Control Panel
The
screen
blinks.
?
?
Check if the
24 bits
(true color)
-
screen
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
higher than AC100-240V 50/60Hz.
A18
Troubleshooting
Have you installed the
Have you installed the
display driver?
?
display
driver?
Be
display driver from the display
(or diskette) that comes with your
sure
to install the
driver CD
you can also download the driver from
web site: http://www.lge.com.
display. Or,
our
Doyouseean
"Unrecognized monitor,
Plug&Play (VESA DDC)
?
Make
sure
Plug&Play
monitor found"
message?
A19
to check if the video card
function.
supports
Specifications
Display
L1752H / L1752HQ
17 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(43.2 cm)
coating
17 inches viewable
0.264
Sync Input
pixel pitch
mm
Horizontal
Vertical
Analog : 30
Digital : 30
Freq.
Input
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
DVI
Resolution
Form
-
Max
Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
0n Mode
Consumption
71 kHz
15
Signal Input
Input
-
-
-
Input Form
Video
83 kHz
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Freq.
Sleep
:
30 W
1024 @60 Hz
x
(Typ.)
≤1W
Mode
Off Mode≤1 W
With Stand
Dimensions
&Weight
Width
36.45
cm
/ 14.35 inches36.45
cm
/ 14.35 inches
Height
35.18
cm
/ 13.85 inches
cm
/ 12.02 inches
45.18
cm
/ 17.79 inches
Depth
Tilt
Range
Power
Input
Environmental
Conditions
Signal
cable
Power cord
(Min)30.53
(Max)
20.74cm /8.17 inches5.78
cm
/ 2.28 inches
Net
3.68(+0.085) kg (8.17 lbs)
Tilt
-5˚~20˚
AC 100-240V~50/60Hz 0.8A
Operating
Conditions
10˚C to 35 ˚C
Temperature
Humidity
Storage
Stand Base
Without Stand
10 % to 80 %
non-Condensing
Conditions
Temperature
-20˚C to 60 ˚C
Humidity
5 % to 90 %
Attached(
),
Detached
(O)
Attached(
),
Detached
(O)
Wall-outlet type
or
non-Condensing
PC-outlet type
NOTE
Information in this document is
subject to change without
A20
notice.
Specifications
Display
L1752HM
17 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(43.2 cm)
coating
17 inches viewable
0.264
Sync Input
mm
Horizontal
Vertical
Input
Video
Input
pixel pitch
Analog : 30
Digital : 30
Freq.
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Freq.
Form
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
15
Signal Input
Input
Form
Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend
VESA 1280
Plug&Play
Power
0n Mode
:
Consumption
Sleep Mode
(Without Speaker) Off Mode
Power
Input
Environmental
Conditions
≤1W
With Stand
Signal
cable
Power cord
Audio
Without Stand
36.44
cm
/ 14.34 inches
Height
39.09
cm
/ 15.39 inches
45.09
cm
/ 17.75 inches
20.74
cm
(Min)
(Max)
/ 8.17 inches
36.44
cm
/ 14.34 inches
34.00
cm
/ 13.39 inches
5.78
cm
Net
3.88(+0.085) kg (8.62 lbs)
Tilt
-5˚~20˚
/ 2.28 inches
AC 100-240V~50/60Hz 0.8A
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 90 %
Humidity
Stand Base
1024 @60 Hz
(Typ.)
Width
Depth
Range
30 W
x
≤1W
Dimensions
Tilt
-
Max
DDC 2B
&Weight
71 kHz
-
DVI
Resolution
83 kHz
-
-
Attached(
),
Detached
Attached(
),
Detached
Wall-outlet type
or
(
non-Condensing
O
)
(O)
PC-outlet type
RMS Audio
Output
Input Sensitivity
Speaker Impedance
1W+1W(R+L)
0.7Vrms
16Ω
NOTE
Information in this document is
subject to change without
A21
notice.
Specifications
Display
L1952H / L1952HQ
19 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(48.19 cm)
coating
19 inches viewable
0.294
Sync Input
pixel pitch
mm
Horizontal
Analog : 30 83 kHz (Automatic)
Digital : 30 71 kHz (Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Freq.
-
-
Vertical
Freq.
-
Input Form
Video
Input
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
15
Signal Input
DVI
Input
Resolution
Form
Max
Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
0n Mode
Consumption
Sleep
:
33 W
1024 @60 Hz
x
(Typ.)
≤1W
Mode
Off Mode
≤1W
With Stand
Dimensions
&Weight
-
Without Stand
Width
40.20
cm
/ 15.83 inches
40.20
cm
/ 15.83 inches
Height
36.47
cm
/ 14.36
33.30
cm
/ 13.11 inches
46.47
cm
/ 18.30
20.74
cm
/ 8.17 inches
Depth
inches(Min)
inches(Max)
5.80
cm
Net
4.51(+0.085) kg (10.02 lbs)
Tilt Range
Tilt
-5˚~20˚
Power Input
AC 100-240V~50/60Hz 0.8A
Environmental
Conditions
Operating
Conditions
Signal
cable
Power cord
10 % to 80 %
non-Condensing
Conditions
Temperature
Humidity
Stand Base
10˚C to 35 ˚C
Temperature
Humidity
Storage
/ 2.28 inches
Attached(
Attached(
-20˚C to 60 ˚C
5 % to 90 %
),
Detached
(O)
),
Detached
(O)
Wall-outlet type
or
non-Condensing
PC-outlet type
NOTE
Information in this document is
subject to change without
A22
notice.
Specifications
Display
L1952HM
19 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(48.19 cm)
coating
19 inches viewable
0.294
Sync Input
mm
Horizontal
Vertical
Input
Analog : 30
Digital : 30
Freq.
Freq.
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Form
-
Max
Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
0n Mode
Sleep Mode
≤1W
Off Mode
≤1W
Consumption
(Without Speaker)
:
Range
Power
Input
Environmental
Conditions
Signal
cable
Power cord
Audio
(Typ.)
Without Stand
40.20
cm
/ 15.83 inches
40.20
cm
/ 15.83 inches
Height
40.60
cm
/ 15.98
36.75
cm
/ 14.47 inches
46.60
cm
/ 18.35
20.74
cm
/ 8.17 inches
inches(Min)
inches(Max)
5.80
cm
Net
4.70(+0.085) kg (10.36 lbs)
Tilt
-5˚~20˚
/ 2.28 inches
AC 100-240V~50/60Hz 0.8A
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 90 %
Humidity
Stand Base
1024 @60 Hz
Width
Depth
Tilt
33 W
x
With Stand
Dimensions
&Weight
71 kHz
15
Signal Input
Input
-
-
-
DVI
Resolution
83 kHz
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Form
Input
Video
pixel pitch
Attached(
),
Detached
Attached(
),
Detached
Wall-outlet type
or
(
non-Condensing
O
)
(O)
PC-outlet type
RMS Audio
Output
Input Sensitivity
Speaker Impedance
1W+1W(R+L)
0.7Vrms
16Ω
NOTE
Information in this document is
subject to change without
A23
notice.
Preset Modes
1
2
3
4
5
6
7
8
9
10
11
*12
**13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
(Resolution)
31.469
31.468
70
31.469
60
x
480
480
37.500
800
x
600
37.879
75
60
800
x
600
46.875
75
832
x
624
49.725
48.363
75
640
x
350
720
x
400
640
640
x
70
1024
x
768
1024
1152
x
60.023
75
x
768
870
68.681
1152
x
900
61.805
75
65
60
1280
x
1024
63.981
60
1280
x
1024
79.976
75
*
Recommend Mode
**
Indicator
On Mode
Sleep
Mode
Off Mode
Green
or
Blue
Amber
Off
Only Analog
Mode
Specifications
Signal Connector
1
8
9
16
17
24
Pin
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
1
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
7
DDC Data
8
Analog
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
Vertical
Sync.
(Transition Minimized Differential Signaling)
A25
Plug
Detect
Installing
the Wall mount
plate
This monitor satisfies the
the
specifications of the
Wall mount
plate
or
device.
interchange
1. Place the monitor with its front facing downward on a soft cloth.
2. Separate the stand after firstly separating 6 screws by using a driver as figure.
R
A
E
R
R
A
E
R
3.
Install the Wall mount
plate.
Wall mount
plate(Separate purchase)
stand-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate
purchased.
This is
is
Kensington Security Slot
a locking
cable that can be purchased
separately at most
Connected to
computer
A26
stores
Digitally yours
Download PDF