LG | L206WU-WFQ | LG L206WU-WFQ Owner’s Manual

User’s Guide
L206WU
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
A1
Important Precaautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Rotate the Stand Body as shown in figure 1 .
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
4. Once assembled take the monitor up carefully and face the front side
Stand Body
Stand Base
Warning
The tape and locking pin may only be removed from those monitors equipped with a standing base
when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
A3
Connecting the Display
Disassembling the stand
1. Put a cushion or soft cloth on aflat
2. Place the monitor face Down on
surface.
the cushion or soft cloth.
3. Pushing Latch inside, Take the stand base from stand body.
Important
This illustration depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get
damaged or injure your foot.
A4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -3˚~17˚
Swivel :356˚
Height Range : maximum 5 .51 inch (140.0mm)
140.0mm
* Please be sure to
remove the Locking
pin to adjust the height.
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward
tilt angle of the monitor should not exceed 5 degrees.
You do not need to replace the Locking pin after it is removed, to adjust its height.
A5
Connecting the Display
Using the Computer
1.
Make sure to turn off the computer and product.
Connect signal input cable 1 and power cable 2 in order, then tighten the
screw of the signal cable.
A Connect DVI Cable
B Connect D-sub Cable
C Connect USB Cable
USB Analog signal Digital signal
DVI
D-sub
Power Cord
D-SUB
AC-IN
DVI-D
Wall-outlet type
PC-outlet type
C
B
DVI-D(This feature is not available in all countries.)
A
2.
Press
button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the
‘AUTO/SET’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the
OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.
A6
Use USB programs
Connecting the USB(Universal Serial Bus) Cable
1. Plug in the USB cable as in the diagram.
One USB Upstream port
Two USB Downstream ports
AC-IN
D-SUB
DVI-D
Connect to downstream connectors of desktop or
laptop computers, mouse, memory stick or USB
hard disk. (However, the computer must support
USB and have the USB port.)
Tidying USB (Universal Serial Bus) Cable
1. Elevate the monitor as far as possible follow 2. Tidy the USB cable as in the diagram,
the arrow to rotate, and plug the USB cable
into the monitor.
press(follow the arrow) the cable holder,
and open it.
3. Fit the USB cable into the cable holder as in
■
the diagram.
A7
When connecting multi screens
Use USB programs
Use USB programs
The display feature can be used by easily connecting the USB cable between
laptops/desktops and the USB port at the back of the monitor.
System Requirements
In order to make full use of USB Display features, your computer must meet the following minimum
system requirements:
1.2 GHz CPU or higher, 512 MB memory or higher (Recommended Specifications: 1.6
GHz Core2 Duo CPU, 1 GB memory)
USB 2.0 Interface
Windows 2000 (Service Pack 4), Windows XP (Service Pack 2) Operating Systems (O/S)
are supported. (But, Windows 98, ME, NT, Vista, Macintosh, Linux Operating Systems
(O/S) are not supported.)
1.
Connect the USB cable as shown in the picture and press the 'SOURCE' button on the front of the
monitor to select the main display.
2.
“LG USB Easy Connection” driver installation automatically starts.
Before installation, make sure your computer meets the minimum system requirements of Windows
2000 (Service Pack 4) and Windows XP (Service Pack 2). If your computer fails to meet those
requirements, update the operating systems at http://www.microsoft.com.
When the “LG USB Easy Connection” program does not install automatically, please install the driver
manually as shown below.
3
1
4
2
5
6
If your computer fails to meet the system requirements, the warning message "DisplayLink Core
Software" will be displayed. Press the [OK] button, and continue to install "LG USB Easy Connection"
program.
3.
Install "LG USB Easy Connection" program as the instruction message says, fully remove the USB cable,
and then reboot your computer. Without rebooting, "LG USB Easy Connection" will not operate properly.
For more detailed information on installation and removal, refer to the accompanied <LG USB Easy
Connection Installation Guide>.
A8
Use USB programs
4. When the installation of "LG USB Easy Connection" program
is completed, icons as shown in the picture will be created in
the taskbar. With these icons, you can easily use features
such as Screen Resolution, Color Quality, Screen Rotation,
Extend To, Extend and Mirror.
■ Screen Resolution : Provides information on the
resolution that the USB supports.
■ Color Quality : You can choose 16
bit or 32 bit colors.
Screen Rotation : You can set the direction to display USB images. (Pivot function)
❈ When there is an input USB signal, you can use Pivot programs on GUI.
1. Lift the monitor to its highest height to utilize the Pivot function.
2. Landscape & Portrait : You can rotate the panel 90o clockwise.
Please be cautious and avoid contact between the monitor
head and the Stand Base when rotating the screen to access
the Pivot function.
If the monitor head touches the Stand Base, then the Stand
Base could crack.
3. When rotating the monitor, be careful with the connected cables.
A9
Head
section
Stand
section
Use USB programs
■ Extend To : Sets the location to display USB images.
(1: Standard monitor, 3: USB Monitor)
Right
Left
Above
Below
■ Extend : Expands the display to a sub screen.
■ Mirror : Shows the same display as the main screen.
■ Off : Does not to display data to make sure USB
screen is not displayed.
5. When using multiple USB monitors, you can set "LG USB Easy Connection" program
separately for each monitor.
1 In case of USB dual monitors.
2 Select No. 3 USB monitor and use "LG USB Easy
Connection" features.
NOTE
In a monitor to monitor connection, with one USB up to five are possible with direction connection, and up to six are
possible with parallel connection.
With the USB cable unconnected, you will not have any trouble using the PC.
Monitor and USB Display connectors support USB 2.0 High Speed.
Does not support DOS game (StarCraft) and other 3D games.
For more information on USB, visit the following web site.(http://www.usb.org)
‘LG USB Easy Connection’ program may be changed without notice for the purpose of product improvement.
A10
Control Panel Functions
Front Panel Controls
6
SOURCE Button You can select the computer that you want to use by
selecting input signal (DVI, D-Sub or USB).
The default input signal is analogue (D-Sub).
MENU Button
Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
A11
Control Panel Functions
- + Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A19.
AUTO/SET
Button
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
- 20.1 inch monitor : 1680 x 1050
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes
to amber.
A12
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
-+
AUTO/SET
-+
MENU
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the - or + Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the - /+ Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A13
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
PICTURE
Sub-menu
A
BRIGHTNESS
GAMMA
sRGB
6500K
9300K
PRESET
USB
Reference
To adjust the brightness,
contrast and gamma of
the screen
CONTRAST
COLOR
D
To customize the color
of the screen
RED
GREEN
BLUE
HORIZONTAL
POSITION
To adjust the position
of the screen
VERTICAL
CLOCK
To improve the clarity
and stability of the screen
TRACKING PHASE
SHARPNESS
SETUP
LANGUAGE
OSD
To customize the screen
status for a user's
operating environment
HORIZONTAL
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
ARC
FLATRON
F-ENGINE
MOVIE / TEXT
To select or customize
desired image settings
USER
NORMAL
: Adjustable
A : Analog Input
D : Digital Input
USB: Digital Input
NOTE
The order of icons may differ depending on the model (A14~A19).
A14
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
PICTURE
Sub-menus
Icons
Button Tip
MENU
- +
SET
: Exit
: Adjust (Decrease/Increase)
: Enter
: Select another sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A15
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
PICTURE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
- : Decrease
+ : Increase
SET : Select another sub-menu
COLOR
COLOR
MENU : Exit
- : Decrease
+ : Increase
SET : Select another
sub-menu
PRESET
Select the screen color.
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
GREEN
Set your own green color levels.
BLUE
Set your own blue color levels.
A16
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
POSITION
POSITION
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
MENU : Exit
- : Decrease
+ : Increase
SET : Select another sub-menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
- : Decrease
SHARPNESS To adjust the clearness of the screen.
+ : Increase
SET : Select another sub-menu
A17
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color level
may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
SETUP
SETUP
SETUP
MENU : Exit
- : Adjust
+ : Adjust
SET : Select another
sub-menu
4:3 IN WIDE To select the image size of the screen.
4:3
WIDE
❈ 4:3 : Depending on the input video signal ratio,
it is automatically changed to an optimized
screen ratio. (The 1280X1024 input signal is
changed to 5:4 ratio and 1024X768 to 4:3.)
Resolution
1280x1024
1152x864
1024x768
800x600
640x480
720x480
Screen ratio
5:4
4:3
4:3
4:3
4:3
3:2
The input signal which the 4:3 IN WIDE does not
support '4:3' is the following.
- The 20.1 inch monitor is
720x400,1280x768,1360x768,1680x1050
Restore all factory default settings except
"LANGUAGE."
Press the - + button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
FACTORY
RESET
A18
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
button on the front of
the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when applied
Screen when not applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
Main menu
Sub menu
Description
MOVIE This feature lets you easily select the best desired
TEXT image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation images in videos or movies
TEXT: For text images (Word processing etc.)
MENU : Exit
- , + : Move
SET : Select
USER
To adjust the USER sub-menu function,
Press the SET Button
User
You can manually adjust brightness, ACE or RCM.
You can save or restore the adjusted value even
when using a different environment.
...
(Brightness): Adjusts screen brightness.
...ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
...RCM(Real Color Management): Selects the color mode.
0
1
2
3
Not applied
Green enhance
Flesh tone
Color Enhance
Select the SAVE sub-menu using the SET button
MENU : Exit
and save the YES value using the buttons.
- : Decrease
+ : Increase
SET : Select another sub-menu
NORMAL This is under normal operating conditions.
A19
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power on and the • Adjust the brightness and the contrast.
power indicator blue or
green?
● Is the power indicator
amber?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
A20
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10.
If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter
problems such as blurred letters, blurry screen, cut-off screen display or tilted
screen.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
A21
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Have you installed the display driver?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
● Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Make sure to check if the video card supports
Plug&Play function.
A22
Specifications
Display
20.1 inches (51.133 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.258*0.258 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
Resolution
15 pin D-Sub Connector
DVI-D Connector (Digital)
USB Connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm)
Digital, USB
Max
VESA 1680 x 1050 @60 Hz
Recommend
VESA 1680 x 1050 @60 Hz
Plug&Play
DDC 2B
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
30 - 83 kHz (Automatic)
Analog : 56 - 75 Hz (Automatic)
Digital, USB : 60 Hz (Automatic)
Separate Sync.
SOG (Sync On Green)
Digital (HDCP)
Width
Height
Depth
Net
:
≤
≤
45 W(Typ.)
2W
2W
With Stand
Without Stand
47.10 cm / 18.54 inches 47.10 cm / 18.54 inches
42.00 cm / 16.54 inches 31.54 cm / 12.42 inches
27.11 cm / 10.67 inches 6.21 cm / 2.44 inches
5.6 kg (12.35 lbs)
Range
Tilt
Height
Swivel
Rotation
Power Input
AC 100-240V~ 50/60Hz 1.2A
Operating Conditions
Temperature
10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Environmental
Conditions
-3˚~17˚ (Head)
5.51inch (140.0mm)
356˚
90˚ clockwise
A23
Specifications
Stand Base
Attached (
Power cord
Wall-outlet type or PC-outlet type
USB
Standard
USB 2.0, Self-Power
Data Rate
Max 480 Mbps
), Detached ( O )
Power Consumption Max 2.5W x 2
NOTE
Information in this document is subject to change without notice.
A24
Specifications
Preset Modes (Resolution)
Analog,Digital supporting modes
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
Horizontal Freq. (kHz)
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
Vertical Freq. (Hz)
70
60
75
60
75
60
75
75
60
75
60
60
*Recommend Mode
USB supporting mode
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
31.469
31.468
37.879
49.727
48.363
67.500
63.681
60.000
63.981
55.469
65.290
60
70
60
75
60
75
75
60
60
60
60
640 x 480
720 X 400
800 x 600
832 x 624
1024 x 768
1152 x 864
1152 X 870
1280 x 960
1280 x 1024
1440 x 900
1680 x 1050
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
blue
amber
Off
A25
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.
2. Separate the stand using a screwdriver as shown in the picture.
3.
Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can be
purchased separately at most computer stores.
A26
Digitally yours
Download PDF

advertising