Table of Contents Installation and Connection Precautions Safety Accessories Before connecting to the PC To arrange cables in order Name and Function of the Parts Connecting Input Selection and Tracking Miscellaneous to External Devices When Connecting When Watching VCR/DVD When Watching TV Selecting and to your PC the Screen Adjusting Name of the Buttons in the screen OSD (On Screen Display) Menu OSD (On Screen Display) Screen Set/Select the channel when Adjusting the Adjusting the sound function Adjusting the time function Selecting the setup function Adjusting the screen picture Troubleshooting Specifications using Adjustment Tracking the TV function (TV/Video only) function (PC only) Unit Order Precautions Safety safety precautions carefully before using Please read these Warning If you ignore the warning message, you may be accident or death. Caution If you seriously injured or the there is product. a possibility of ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from - Electrical heat like electrical heaters. shock, fire, malfunction Keep the packing - sources deformation may or anti-moisture material occur. vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. or Do not - put heavy objects on the product or sit upon it. product collapses or is dropped, you may be injured. If the Children must pay particular attention. Do not leave the power or signal cable unattended on the pathway. The passerby can falter, which can cause electrical shock, fire, product breakdown - Install the - Dust or product moisture in neat and a can cause If you can smell smoke service center. - If you continue to use If you dropped the If you continue to - or injury. dry place. electrical shock, fire other odors without or taking or hear or a product damage. strange sound unplug proper measures, electrical shock or the power cord and contact the fire can occur. product or the case is broken, turn off the product and unplug the power cord. use without taking proper measures, electrical shock or fire can occur. Contact the service center. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and - contact the service center. Caution Make product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10cm from the wall) If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat. sure the - Do not block the ventilation hole of the - The product can be deformed or fire product by a tablecloth or curtain. can break out due to overheating inside the product. Install the - If the product on a flat and stable place that has no risk of dropping the product. product is dropped, you may be injured or the product may be broken. Install the product where no EMI occurs. Keep the product away from direct sunlight. The product can be damaged. - A1 ENGLISH Electrical Power Related Precautions Warning Make - to connect the power cable to the You may be electrocuted or injured. sure grounded current. Use the rated - The voltage only. product can be damaged, During - a thunder or or you may be electrocuted. lightning storm, unplug the power cable or signal You may be electrocuted or a fire can Do not connect several extension Use - break out. cords, electrical power bar with a grounding terminal A fire can break out due to overheating. a appliances or electrical heaters to a single designed for exclusive use with the computer. Do not touch the power plug with wet hands. the power plug completely or wipe dust off. - You may be electrocuted due to cable. excess Additionally, if the cord pin is wet or outlet. covered with dust, dry moisture. If you don't intend to use the product for a long time, unplug the power cable from the product. Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. - Fix the power cable completely. If the power cable is not fixed completely, - a fire can break out. Hold the plug when pulling out the power cable. Do not bend the power cord heavy objects on the power cord. The power line can be damaged, which may cause electric shock or fire. with excessive force or put - Do not insert a conductor (like connected to the chopstick) into one end of the power cable while the other end on the wall. Additionally, do not touch the power cable right after a metal is input terminal plugging into the wall input terminal. - You may be electrocuted. The power supply cord is used accessible after installation. as the main disconnection device. Ensure that the socket-outlet is Caution Do not - unplug the power cord while the product Electrical shock can damage the product. Precautions in Moving is in use. the Product Warning Make - to turn off the You may be Make - sure sure to product. electrocuted or the product can remove be damaged. all cables before You may be electrocuted or the moving the product. product can be damaged. A2 easily Precautions Safety Caution Do not shock the - You may be Do not product when moving it. electrocuted or the product can dispose the product-packing be damaged. box. Use it when you move. Make the panel face forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock - for or fire. Contact with the service center repair. Precautions in Using the Product Warning Do not - - Fire disassemble, repair or modify the product at your or electric shock accident Contact the service center for discretion. own can occur. check, calibration or repair. When cleaning the brown tube surface, unplug the power cord scratching. Do not clean with a wet cloth. and scrub with soft cloth to prevent Keep the product away from water. - Fire or electric shock accident can occur. Caution Do not - put There is a or store inflammable substances danger of explosion or fire near the due to careless product. handling of the inflammable substances. When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth. The water can sink into the product, which can cause electric shock or serious malfunction. - Take a rest from time to time to Keep the product clean protect your vision. at all times. Take a comfortable and natural Take a regular break when working with Do not press strongly upon the a scratch on it. position when a panel with working with a product to relax the muscles. product for a long time. a hand or sharp object such as nail, pencil or pen, or make Keep the proper distance from the product. Your vision may be impaired if you look at the product too closely. - Set the - appropriate Your vision Use authorized - Product On be can can resolution and clock by referring to the User's Guide. impaired. detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.) be deformed. Disposal The fluorescent product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. lamp used in this A3 Accessories Please check the accessories in the * The product and the accessories Remote Control/Batteries product package. can be different from the User's Guide/ D-Sub figures Signal Cable Driver CD/Cards Power Cord RCA to SCART Audio Cable (PC) Back Cap Cable(Optional) -It varies from country/region to country/region. Inserting batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct 3. Close the ? You remote control 7 meter distance and degree (left/right) within the receiving unit scope. Dispose of used batteries in the recycle bin to prevent environmental pollution. 30 ? polarity (+/-). battery cap. can use a A4 shown here. ENGLISH Before Before Connecting to the PC setting up the product, ensure that the power to the product, the computer system, and other attached devices is turned off. Unfolding Place the the stand base product with its front facing downward on Hold down the release button inside the stand and with your two hands. The stand won't move if you don't press release button. A5 soft cloth. strongly pull out the stand To arrange cables in order Connect the power cord and the audio cable to arrange in the cable holder as shown in the following figure. cables, refer to next pages.) signal cable, use in order to (To connect the Cable Holder Push the back cap Back according to the steps shown in the following figure. Cap A6 ENGLISH Name and Function of the Parts Name of the Remote Control Buttons Remote Control MUTE POWER MUTE POWER TV/AV TV/AV button : TV TV/AV MULTIMEDIA I/II AV S-Video MULTIMEDIA If you press the button once, the following Input Signal Input LIST Q.VIEW PC MENU Window will appear. Select the signal type you want using the TV AV button. S-Video PC PR OK I/II VOL VOL : choice and sound mode selection Bilingual Press this button [TV] PR to switch from Stereo to Mono sound in transmission, in case of or digital of stereo case from Nicam Stereo to Nicam transmission. to switch from Nicam Dual I to Nicam Dual II Dual I+II in I, Dual II of : transmission Dual I sends the loudspeakers primary or broadcast Dual I+II in language case to the ; Dual II sends the loudspeakers Nicam or of Nicam Dual transmission. case to choose between Dual bilingual Mono, secondary broadcast language to the ; Dual I+II sends a separate language to each loudspeakers. [AV] SSM PSM In AV mode, you can select output sound for the left and right loudspeakers. Repeatedly select the sound L+L press the I/II button to output. signal from audio L input is sent to left and right loud-speakers. L+R : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker. R+R : Audio signal from audio R input is sent to left and right loud-speakers. : Audio NOTE or : In case of weak stereo sound Nicam stereo transmission, select A7 signals, with stereo mono reception. LIST MUTE Programme list To display the programme POWER 0 TV/AV MULTIMEDIA I/II 1 4 MENU ----- 8 ----- ----- 9 ----- (0~99). ----- 7 ----- list ----- 6 ----- 3 Q.VIEW 5 ----- 2 LIST ENGLISH : ----- Note: TV channels to be Q.VIEW : displayed in blue have been setup skipped in the Programme Edit menu. QUICK VIEW Button PR OK * Favourite * Favourite Program Program On : Off : To VOL VOL PR Rotate favourite channel display the previously seleted TV channel MENU Use this button to enter the On Screen PR Display menu. ) Buttons Able to change channel. VOL ( ) Buttons Able to adjust sound. ( OK Button Use when functional adjustment is completed. Number buttons Able to SSM PSM SSM directly (Sound select and Status change Memory) channel. Button Use this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Speech, User sound tone. PSM (Picture Press Status Memory) Button repeatedly to select Dynamic, Standard, Mild, Game or User picture mode. A8 Name and Function of the Parts Name of the Remote Control Buttons Remote Control SLEEP You : can SLEEP Timer set a time period after which the TV / AV / S-Video should switch itself to SSM PSM Press the key repeatedly to select the standby. number of minutes. SLEEP TEXT Remote Control - OFF 10 20 30 240 180 120 90 60 Using the Teletext function (Optional) UPDATE Press the button to appear the TV programme. At the top of screen indicates that you are still in the teletext mode. Before interrupting teletext, you may select a page number. When the page has been found, the information line appears briefly on your screen. Press the button again to SSM SLEEP PSM reappear teletext. SIZE TEXT Press the button UPDATE TIME X SIZE HOLD upper part, the lower part and then to return to the normal page size. MIX REVEAL HOLD Press the button to of the ? INDEX i repeatedly to display the subpages. stop the automatically rotating Press the button continue the automatic MODE M again to rotating again. INDEX To display the A9 main index. Remote Control LIST Q.VIEW - Using the Teletext function (Optional) MENU TEXT To select the teletext page an OK off. The main index the last selected page appears on the together with an information headline and or screen PR on or line at the bottom of the option screen. TIME VOL VOL Press this button to select sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the PR a sub page, press the RED/GREEN, or NUMBER buttons. Press again to exit this function. MIX Display the teletext pages superimposed on the TV picture. To switch the TV picture off press this button again. SSM PSM REVEAL SLEEP TEXT Press the button to reveal/conceal the hidden information, such UPDATE TIME puzzles. information from the HOLD MIX REVEAL i again display. to remove the MODE The mode will be switched in the Teletext mode. ? INDEX solutions to riddles and Press this button X SIZE as MODE M A10 ENGLISH Name and Function of the Parts Rear View Back - Cap the back cap before you install the product. Open [15 inch] L S-Video [17 inch / 19 Power Connector : L Input AudioR Connect the power cord. Headphone/Earphone D-Sub AUDIO IN inch] S-Video AV AudioR ANT IN Connection Terminal Terminal Analog Signal TV Tuner Jack Connect the antenna. : PC Sound Jack Connector : Connect to the jack in the PC sound card. A11 ANT IN AUDIO IN AV Input S-Video Terminal Video S-Video Input ENGLISH Audio Terminal AV(CVBS) Input Terminal(Video) AV(CVBS) Input Terminal(Audio) Connecting ? Make the sound card output terminal connecting to the product. If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user's guide.) Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier. *Line Out : The terminal connected to the speaker equipped with an amplifier. If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated with an amplifier. sure to check the sound card connection terminal in the PC before - - A12 Connecting to External Devices When First of Then, Connecting to your PC all, see if the connect the computer, product and the peripherals are turned off. signal input cable. A When connecting with the D-Sub signal input cable. (IBM compatible PC) B When connecting with the D-Sub signal input cable. (Macintosh) Rear side of the product. Au S-Video S-Video Video L dioR ANT IN AUDIO IN Audio ANT IN AUDIO IN D-Sub PC Macintosh A B Macintosh Adapter (Optional) Use the standard Macintosh adapter is available A13 adapter since in the market. an incompatible (Different signaling system) Connect the power cord. Rear side of the L S-Video * A When connecting to a Select an ENGLISH AUDIO IN sensor the PC. input signal. Press the MULTIMEDIA button MULTIMEDIA SOURCE on the remote control to select the input signal. OK Or, press the SOURCE button ? ANT IN sensor. Power On/Off on AudioR wall outlet. Touch the Power On/Off B Turn product. at the front side of the AUTO/SELECT product. TV/AV MULTIMEDIA I/II LIST Q.VIEW MENU Input Select PC TV AV S-Video PR PC OK VOL VOL PR Note Directly connect to a grounded power outlet A14 on the wall or a power bar with a ground wire. to External Devices Connecting When watching VCR/DVD Connect the video/audio cable cord A (See page as shown in the below figure and then connect the power A14). When ? connecting with an RCA cable. Connect the input terminal with a proper color match. (Video Yellow, Sound (left) White, Sound (right) Red) -- -- B When connecting with an S-Video cable. ? Connect to the S-Video watch input terminal to high image quality movies. -- Rear side of the Product S-Video Audio Video White Yel ow Rear side of the Product S-Video Red Video Audio Red White S-Video Cable (Not included) RCA Cable (Not included) RCA Cable (Not included) Y WR WR VIDEO AUDIO VIDEO AUDIO OUT OUT OUT OUT VCR/DVD VCR/DVD A15 When C connecting with an RCA to SCART cable.(Optional) ENGLISH Rear side of the Product S-Video Audio Video White Yel ow Red RCA to SCART Cable Please, use (Optional) shielded scart cable. VCR / DVD Select an input signal. Press the MULTIMEDIA button MULTIMEDIA SOURCE When at the front side of the product. AUTO/SELECT a RCA cable. TV/AV MULTIMEDIA I/II LIST Q.VIEW MENU TV connecting with a S-Video cable. AV S-Video Select S-Video When ? connecting with Select AV When ? C input signal. Input ? B the remote control to select the OK Or, press the SOURCE button A on connecting with a PR PC RCA to SCART cable. OK Select AV VOL VOL PR A16 Connecting When to External Devices watching TV See if the antenna cable is connected at the then, rear side of the product and connect the power cord. Rear Side of the Product S-Video AudioR L S-Video ANT IN Video AUDIO IN Audio AUDIO IN ANT IN Antenna Cable (Not included.) Select an input signal. Press the MULTIMEDIA button MULTIMEDIA ? the remote control to select the input signal. OK Or, press the SOURCE button SOURCE on at the front side of the product. TV/AV MULTIMEDIA I/II LIST Q.VIEW MENU AUTO/SELECT Input Select TV TV AV S-Video PR PC OK VOL VOL PR A17 and Selecting the Screen Adjusting Name of the Buttons in the Screen SOURCE MENU < PR < < VOL > Adjustment Unit ENGLISH AUTO/SELECT PR This Indicator lights up blue when the display operates normally (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator color changes to amber. ? Power Indicator Power On/Off sensor MENU Button ? ? Touch the Power On/Off sensor. Use this button to show/hide the OSD (On Screen Display) menu screen. OSD Select/Adjust Button ? Use this button to select ? ? an icon or adjust the setting in the OSD Use this button to control the channel for the TV Adjust the volume. A18 Volume screen. signal. 0 and Selecting the Screen Adjusting Name of the Buttons in the Screen AUTO/SELECT Button ? Select the icon to [For ? adjust Adjustment on the OSD Unit screen. PC Analog signal] If you press the [AUTO/SELECT] button, adjustment will be started. automatic screen Processing... SOURCE SOURCE Button ? ? Select the Input AUTO/SELECT input signal TV TV Television AV AV Composite video S-Video S-Video S-Video PC D-Sub The unit that receives the A19 analog signal signal PC from the remote control. OSD (On Screen Display) Icon Function Menu ENGLISH Description Set/Select the channel when using the TV Station Adjusting the Adjusting the sound function. Adjusting the time function. Selecting the Adjusting the picture function. Picture Sound (TV/Video only) Time setup function. Setup screen function. (PC only) Screen Note OSD(On Screen Display) The OSD function enables you to adjust graphical presentation. A20 the screen status conveniently since it provides and Selecting OSD the Screen Adjusting (On Screen Display) Screen Tracking Order PR PR MENU OK OK up the PR Move where you want to menu screen OK OK PR Pop MENU Select a menu icon Adjust the status adjust Use the remote control to ? 1 Press the MENU Button, then the main menu 2 To 3 When the icon you want becomes highlighted, 4 Use the adjust the 5 Accept 6 Exit the OSD access a use the changes by pressing by pressing set an If adjust the OSD screen. item to the desired level. the OK Button. the MENU Button. adjust the screen Press the AUTO/SELECT button in the PC screen menu screen. press the OK Button. automatically. adjust the screen display when connecting the product to computer or changing the mode. Refer to the following section to optimal product screen. optimal adjustment of the OSD appears. You need to a new Exit from the Buttons. Buttons to the How to control, Save analog signal. Then, an status will be selected that fits into the current mode. adjustment is not satisfactory, you clock and phase in the OSD menu. need to adjust screen A21 position, Processing... Set/Select the channel when Auto programme using the TV ENGLISH Station Auto programme To set Manual programme edit Programme Favourite programme OK MENU Press the System buttons to select the TV system of the country the world from where you want to receive the TV channels. If you want to receive 'SECAM L' channel, change the System before launching L: SECAM L/L BG I Storage from to 'L' (France) (Europe/East Europe) (U.K/Ireland) DK : M NTSC-Multi : menu automatic search. PAL B/G, SECAM B/G : PAL I/II : an part of or PAL D/K, SECAM D/K To select (East Europe) programme number or enter the programe number with the number buttons from where you want to start searching for new channels. a If e.g. you want to keep the channels 1 to 10 stored earlier, enter programe number 11. Your TV search for new channels from number 11 onwards. Press OK programming. all available channels are searched for and stored automatically. To stop auto programming, press the MENU button. When auto programming is completed, the programme list menu appears. Search Manual programme or button to start automatic Station TV To change the channel. (Change each item in Manual Program and press the "MENU" button to save the settings) Auto programme Manual programme To set edit Programme Favourite programme OK MENU Storage System Press the buttons to select the channel number or enter the programme number with the number buttons in where you want to store channel. Press the buttons to select the TV system of the country the world from where you want to receive the TV channels. L: SECAM L/L BG I : : PAL B/G, SECAM B/G PAL I/II (Europe/East Europe) (U.K/Ireland) DK : M NTSC-Multi : (France) PAL D/K, SECAM D/K A22 (East Europe) or part of and Selecting the Screen Adjusting Set/Select the channel when Channel Press the using the TV buttons to select VHF/UHF for aerial channels cable channels. If you know the channel digit buttons 0 to 9. To select the channel Search Use the Name To : It is to TV channel which has not a directly Cable for with the VHF/UHF / Cable assigned channel name. possible to change the name stored see enter it buttons to search next channel backward or forward direction. the numbers Programme edit reception type. number, or can be given yet in the memory or to assign a name been entered. A name with up 5 letters or to the programme numbers 0 to 99. Press the buttons to changed. -> Press the character.(space, number 0~9,and alphabet A~Z,+,-) buttons to select a Press OK button or move cursor to be MENU button. Station Auto programme 0 Manual programme 1 Programme edit Move OK MENU Press the buttons to select Press the red key on Press the Delete button Copy following change Press the are -> The background shifted up buttons to select Press the Press the buttons to Press the Skip buttons to select yellow key move a one position. TV channel to be a copyed. -> following channel channel number to be moved. the remote control. yellow key again -> key on a Press the channel number to be the remote control. The in blue. A23 -> -> to release this function. buttons to select Press the blue colour of the TV channel to the desired channel number. Press the displayed on -> time to delete the selected channel. Press the green key on the remote control. All the numbers are shifted down one position. Move Copy Skip to red. one more channels ----- TV channel to be deleted. the remote control the selected channel will All the a ----- 9 ----- Delete Delete ----- 8 ----- 4 ----- 7 ----- 3 Favourite programme ----- 6 ----- 2 To set 5 ----- skipped skipped. TV channel is -> -> Set/Select the channel when Favourite Station programme Auto programme using the TV Favourite programme Off Manual programme Programme edit Favourite programme To set OK MENU Q.VIEW ------ ------ ------ ------ ------ ------ ------ ------ OK MENU This function lets you select your favourite programmes directly. Press the buttons to select a channel number. * 1 2 3 4 5 6 7 8 button(remote control) Rotate Favourite channel : A24 (8 channel) ENGLISH and Selecting the Adjusting the Screen Adjusting picture function (PC) PSM The PSM function Picture PSM < CSM Dynamic Standard FLATRON f ENGINE . Mild Contrast User screen image quality. Dynamic Select this option to display with a sharp image. ? ? Game Brightness automatically adjusts the Standard The most ? general OK MENU display status. option to display with a mild image. Game Select this playing ? screen Mild Select this ? and natural a option to enjoy dynamic image when game. User Select this option to use the user-defined settings. CSM Selecting Picture ? PSM < CSM FLATRON f ENGINE Normal Contrast Warm Brightness User bluish white. Warm reddish white. Slightly ? User Select this Set your . option to use the user-defined settings. Red / Green / Blue OK MENU FLATRON f white. Normal Slightly ? color set. Cool Slightly purplish Cool ? . factory setting a own color levels. ENGINE Picture This feature lets you easily select the best desired image condition optimized to the environment PSM CSM FLATRON f ENGINE . Contrast < On Off Brightness OK MENU Picture Contrast PSM Brightness CSM FLATRON f ENGINE . Contrast Brightness OK MENU A25 : To : adjust To the contrast of the adjust the brightness screen. of the screen. the Adjusting picture function (TV/Video) PSM The PSM function Picture PSM < CSM Dynamic Standard FLATRON f ENGINE . Mild Contrast User ? ? Standard The most ? general ? OK MENU a User Selecting < option to ? FLATRON f ENGINE Normal . Contrast Warm Brightness User . white. Warm reddish white. User option to use the user-defined settings. Red / Green / Blue Set your FLATRON f color set. bluish white. Select this OK MENU settings. Normal Slightly ? the user-defined Cool Slightly ? use factory setting a Slightly purplish Cool image. game. CSM CSM mild option to enjoy dynamic image when Select this PSM display status. Game playing ? screen option to display with a Select this ? and natural Mild Select this Picture screen image quality. Dynamic Select this option to display with a sharp image. Game Brightness automatically adjusts the own color levels. ENGINE This feature lets you easily select the best desired image condition optimized to the environment Picture PSM CSM FLATRON f ENGINE . Contrast < On Off Brightness OK MENU Picture Colour Contrast : To adjust To Brightness : Colour adjust : To Sharpness Sharpness Tint Tint : To A26 To adjust (only OK MENU : the contrast of the adjust the brightness of the screen. the color to desired level. adjust the clearness of the the tint to desired level. 60Hz screen. signal) screen. ENGLISH and Selecting Adjusting the Screen Adjusting the sound function Sound SSM < AVL Flat Music Balance Movie Speech User OK MENU SSM The best sound tone quality will be selected automatically depending on the video type that you're currently watching. Flat : The most commanding and natural audio. Music : Select this option to enjoy the original sound when listening to the music. Movie : Select this option to enjoy sublime sound. Speech : Select this option to watch sports broadcasting. User : Select this option to use the user-defined audio settings. ? ? ? ? ? AVL Balance To adjust uneven appropriate level. sound volumes To use this across all channels or signals automatically to the feature, select On. Use this function to balance sound from the left and A27 right speakers. most Adjusting the time function (TV/Video only) ENGLISH Time Time --:-- Off time On time Auto off OK MENU This function is used to set up of current time. You must set the time correctly before using On/Off time function. Time 1) 2) 3) 4) Press the MENU button and then Press the button and then use button to set the Press button and then use button to set the -- : automatically Auto off If Auto off is active and there is (TV input only) after 10 minutes. ? Note ? ? ? pre-set time. button to select the Time use button to select Off time button to set the button to set the or menu. On time. hour(00~23). minutes(00~59). button to select On button and then or Off. button to adjust volume level save. no input signal, Press the MENU button and then button and then use save the TV swithchs to off mode button to select the Auto off button to select On use Press the OK/MENU button to or automatically menu. Off. . In the event of power interruption (disconnection or power failure), the Time must be reset. Two hours after the set is switched on by the On time function it will automatically switch back to off mode unless ? menu. hour(00~23). minutes(00~59). switches the set to off mode at the and programme number. Press the OK/MENU button to Press the menu. --. 1) Press the MENU button and then button and then use 2) Press the button and then use 3) Press the button and then use 4) Press the button and then use 5) Press the 6) Only On time function; Press the 1) 2) 3) button to select the Time use button and then The Off time 7) button to select the Time Press The default value is Off/On time use Once the On a button has been pressed. Off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. or The set must be in off mode for the On time to work. A28 and Selecting Selecting the the Screen Adjusting setup function Setup To set Language Child lock Factory reset Power indicator OK MENU Language To choose the Child lock Use the language in which the control buttons to select On the remote control. This feature In order to lock the OSD In order to unlock 1) Off. It or can adjustment, following : it, do the Push the MENU button on displayed. be set up unauthorized can prevent screen names are so that it can only be used with viewing. set the Child lock tab to the 'On' the remote control and set Child lock to the 'Off' position. position. Factory Use this function to reset the reset will not be initialized. Power Use this function to set the power indicator on the front side of the product to On or Off. If you set On at any time, the power indicator will automatically be turned on. indicator product to the A29 factory default. However, language selection Adjusting the function screen (PC only) ENGLISH Screen Reset To set Auto configure Manual configure OK MENU Reset Use this function to reset the product to the factory default. However, language selection will not be initialized. Auto This button is for the automatic adjustment of the screen Position, Clock and Phase. configure Manual configure This button is for the manual ? screen move image left image up or right. move or down. Clock To minimize any vertical bars or stripes visible The horizontal screen size will also change. ? Position, Clock and Phase. V-Position To ? of the H-Position To ? adjustment on the screen background. Phase To adjust the focus of the display. This item allows and clear or sharpen the image of characters. A30 you to remove any horizontal noise Troubleshooting No is image displayed ? See if the power cord is outlet. Does the power indicator is turned on? ? See if the power switch is turned Power is on, power indicator is blue but the screen appears extremely ? Is the product power cord connected? Adjust brightness properly connected to the and contrast on. again. dark. Does the power indicator look amber? ? Does the 'Out of ? range' message If the product mouse or appear? The press any signal message appear? key. The : signal : 1280 1024 x x 1024 @75Hz 768 @75Hz cable between PC and connected. Check the ? the Maximum resolution 15 inch ? move from the PC signal 17, 19 inch cable' saving mode, (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this user's guide. * Does the 'Check is in power signal product is not cable. Press the 'MULTIMEDIA' button in the remote control to check the input signal. 'Unknown Product' message appears when the product is connected. Did you install the driver? ? ? Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) See if the referring * Note plug&play function to the video card is supported by user's guide. Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. A31 The Is the screen image screen ? position wrong? looks abnormal. D-Sub analog signal -- Press the AUTO/SELECT" button in the front side of the set to automatically select the current optimal screen status that fits into the mode. If adjustment is not satisfactory, use the Position OSD ? menu. See if the video card resolution and supported by the frequency are product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu. -- Do thin lines appear on the background screen? ? D-Sub -- analog signal optimal screen status that fits into the mode. If adjustment is not satisfactory, use the Clock OSD the ? D-Sub menu. analog signal appears ? automatically optimal screen status that fits into the mode. If adjustment is not satisfactory, use the Phase OSD After-image appears when the product is turned off. Press the AUTO/SELECT" an current After-image -- button in the front side of the set to select automatically an current or Press the AUTO/SELECT" button in the front side of the set to select Horizontal noise appears characters look blurred. -- on the menu. product. If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screensaver function. A32 ENGLISH Troubleshooting The audio function does not work. No sound? Sound is too low. ? See if the audio cable is connected ? Adjust the volume. ? See if the sound is set ? Adjust the volume. properly. properly. The TV function does not work. The TV signal is not being received. ? See if you have selected the proper channel mode. ? Use the automatic channel ? See if the TV antenna is setup function. properly connected. Screen color is abnormal. Screen has poor color resolution (16 ? Set the number of colors to Select Control Panel -- Screen color is unstable or mono- ? (true Color Table menu Display -- -- Settings in Windows. Check the connection status of the signal cable. Or, re-insert the PC video card. colored. screen? than 24 bits color) colors). Do black more spots appear on the ? Several green, white or black color) the screen, which can be pixels (red, may appear on attributable to the LCD A33 panel. unique It is not a characteristics of the malfunction of the LCD. Specifications The product specifications can change without prior notice for product improvement. [15 inch] LCD Panel Video Signal Screen 15 inches (38.016 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 38.016 cm Type Pixel Pitch 0.297 Max. Resolution 1024 X 768 @75 Hz Recommended Resolution 1024 X 768 @60 Hz Horizontal 30 Vertical Frequency 56 Frequency Synchronization Type Input - - mm 63 kHz 75 Hz Separate S-Video, Composite video, TV, D-Sub Analog Connector Power Rated Voltage Power Consumption AC 100-240V~50/60Hz 0.6A On Mode : 30 W SleepMode ≤ 4W OffMode ≤ 2W Tilt Tilt Dimension/Weight -5 Range ~25 Tilt Stand Attached Size 375.4 (WxLxH) Weight (excl. package) Environmental Conditions Condition Operational Storage Condition A34 4.4 mm x 221.8 mm x 373.8 mm kg (9.7 Ibs) 10˚C Temperature: Temperature: -20˚C 35˚C ~ 10% ~ 5% ~ Humidity: 60˚C Humidity: , ~ , 80% 95% ENGLISH Specifications The product specifications can change without prior notice for product improvement. [17 inch] LCD Panel Video Signal Screen 17 inches (43.27 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 43.27 cm Type Pixel Pitch 0.264 Max. Resolution 1280 X 1024 @75 Hz Recommended Resolution 1280 X 1024 @60 Hz Horizontal 30 Vertical Frequency 56 Frequency Synchronization Type Input Connector Power Tilt Dimension/Weight Environmental Conditions mm 83 kHz - 75 Hz - Separate S-Video, Composite video, TV, D-Sub Analog Rated Voltage Power Consumption Tilt AC 100-240V~50/60Hz 1.0A On Mode : 50 W SleepMode ≤ 4W OffMode ≤ 2W -5 Range ~25 Tilt Stand Attached Size 419.9 (WxLxH) Weight (excl. package) 5.9 mm x 221.8 mmx 423.5 mm kg (13.0 Ibs) Operational Condition Temperature: 10˚C 35˚C Humidity: 10% Storage Condition Temperature: -20˚C 60˚C Humidity: 5% ~ , ~ , A35 80% ~ 95% ~ The product specifications can change without prior notice for product improvement. [19 inch] LCD Panel Video Signal Screen 19 inches (48.18 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 48.18 cm Type Pixel Pitch 0.294 Max. Resolution 1280 X 1024 @75 Hz Recommended Resolution 1280 X 1024 @60 Hz Horizontal 30 Vertical Frequency 56 Frequency Synchronization Type Input Connector Power Tilt Dimension/Weight Environmental Conditions mm 83 kHz - 75 Hz - Separate S-Video, Composite video, TV, D-Sub Analog Rated Voltage Power Consumption Tilt AC 100-240V~50/60Hz 1.0A On Mode : 55 W SleepMode ≤ 4W OffMode ≤ 2W -5 Range ~25 Tilt Stand Attached Size 458.3 (WxLxH) Weight (excl. package) 7.0 mm x 242.0 mm x 457.7 mm kg (15.4 Ibs) Operational Condition Temperature: 10˚C 35˚C Humidity: 10% Storage Condition Temperature: -20˚C 60˚C Humidity: 5% ~ , ~ , A36 80% ~ 95% ~ ENGLISH Specifications PC Mode -- Preset Mode [15 inch] Preset mode Horizontal Vertical Frequency (kHz) Frequency (Hz) 1 VGA 640 x 350 31.468 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 4 VESA 640 x 480 5 VESA 640 x 6 VESA 640 7 VESA 800 Horizontal Vertical Frequency Frequency (kHz) (Hz) Preset mode 89 VESA 800 x 600 37.879 60 MAC 800 x 600 48.077 72 60 10 VESA 800 x 600 46.875 75 35.000 66 11 MAC x 624 49.725 74 480 37.861 72 12 VESA 1024 x 768 48.363 60 x 480 37.500 75 13 VESA 1024 x 768 56.476 70 x 600 35.156 56 14 VESA 1024 x 768 60.023 75 Horizontal Vertical 832 [17 inch] Preset mode Horizontal Vertical Frequency (kHz) Frequency (Hz) 1 VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 4 VESA 640 x 480 5 VESA 800 x 6 VESA 800 7 VESA 832 Frequency Frequency (kHz) (Hz) Preset mode 89 VESA 1024 x 768 48.363 60 MAC 1024 x 768 60.123 75 60 10 VESA 1152 x 870 68.681 75 37.500 75 11 VESA 1152 x 900 61.805 65 600 37.879 60 12 VESA 1280 x 1024 63.981 60 x 600 46.875 75 13 VESA 1280 x 1024 79.976 75 x 624 49.725 74 [19 inch] Preset mode Horizontal Vertical Frequency (kHz) Frequency (Hz) 1 VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 4 VESA 640 x 480 5 VESA 800 x 6 VESA 800 7 VESA 832 Horizontal On Mode Sleep Mode Off Mode Frequency Frequency (kHz) (Hz) Preset mode 89 VESA 1024 x 768 48.363 60 MAC 1024 x 768 60.123 75 60 10 VESA 1152 x 870 68.681 75 37.500 75 11 VESA 1152 x 900 61.805 65 600 37.879 60 12 VESA 1280 x 1024 63.981 60 x 600 46.875 75 13 VESA 1280 x 1024 79.976 75 x 624 49.725 74 Power Indicator Mode Vertical Product Blue Amber Off A37 VESA wall VESA wall ENGLISH mounting mounting Connected to another object (stand type and wall-mounted type). This product accepts a VESA-compliant mounting interfacepad.(optional) For further information, refer to the VESA Wall Mounting Instruction Guide. Theft prevention locking device Locking Use this Device locking cable A38 (optional) to prevent theft.