LG | L245WP-BN | LG L245WP-BN Owner’s Manual

User’s Guide
L245WP
L245WPM
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Rotate the Stand Body as shown in figure 1 .
3. Align the hooks on the Stand Body with the matching slots in the Stand Base.
4. Insert the hooks into slots.
Hook
Stand Base
Slot
Warning : The
tape and locking pin may only be removed from those monitors equipped
with a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
A3
Connecting the Display
5.
Attach the monitor to the Stand Base by turning the screw to the right.
Screw : Turn the screw by using the screw handle.
6. Lift and turn the monitor to face towards the front after the connection is
made to the female part of the cable you're attaching.
7. Take the screw out by turning to the left to separate the monitor and Stand
Base.
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚
Swivel :350˚
Height Range : maximum 3.94 inch (100.0mm)
100.0mm
* Please be sure to
remove the Locking
pin to adjust the height.
Notice
You do not need to replace the Locking pin after it is removed, to adjust its height.
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there
is stain or fingerprint on surface of the exterior. Do not wipe roughly when removing stain. Please be
cautious of that excessive power may cause scratch or discoloration.
A5
Connecting the Display
Using the Pivot function
1. Lift the monitor to its highest height to utilize the Pivot function.
2. Landscape & Portrait : You can rotate the panel 90
o
clockwise.
Please be cautious and avoid contact between the monitor head and the Stand
Base when rotating the screen to access the Pivot function. If the monitor head
touches the Stand Base, then the Stand Base could crack.
Head section
Stand section
3. For detailed information, please refer to the Pivot Software CD provided.
A6
Connecting the speakers - The feature is only for speaker models - L245WPM
Connecting the speaker
1. Rotate the panel at an angle of 90 degrees as shown in the picture, after lifting
the monitor to its highest height.
2
AUDIO
OUT
* Make sure the panel does not
touch the floor when rotating.
PB
1
2
AUDIO
OUT
DC-OUT
HDMI/DVI
Y
COMPONENT
PR
D-SUB
1
1
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
2. Insert the projecting hook of the speaker in the direction of the monitor’s back
slot until you hear the clicking sound.
3. After connecting the speaker, connect the Audio DC-IN cable to the DC-OUT
socket on the back of the monitor.
AUDIO
OUT
2
2
AUDIO
OUT
1
D-SUB
PR
COMPONENT
PR
PB
DC-OUT
HDMI/DVI
Y
COMPONENT
PR
HDMI/DVI
DC-OUT
Y
PB
HDMI/DVI
DC-OUT
D-SUB
AUDIO
OUT
Y
PB
2
D-SUB
1
COMPONENT
2
AUDIO In
Hook
1
Slot
3
Audio DC-In
Cable
DC-OUT
Notice
Be cautious to avoid your hand being caught
between the speaker and Stand Base when lowering
the monitor to its lowest height, with the speaker
fully equipped.
4. Connect the audio cable to the AUDIO-IN terminal. When using HDMI, you can
connect the monitor’s to the AUDIO-OUT terminal. When using a PC or other
component, simply connect to the appropriate female socket of the external
instrument.
A7
Name and function of the Parts
9
2
AUDIO
OUT
Rear View
1
8
COMPONENT
AC-IN
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
7
6
1
3
2
4
5
1 AC-IN Connector : Connect the Power Cord
2 DC-OUT Jack
3 HDMI/DVI Signal Connector
4 COMPONENT Input Terminal
5 D-SUB Analogue Signal Connector
6 Kensington Security Slot
7 USB UP stream Port(1EA)
8 USB DOWN stream Port(2EA)
9 Audio out Jack(Headset/Earphone/connecting terminal of the Speaker)
: You can use the AUDIO-OUT Jack by connecting earphones or a headset
when using the HDMI configuration..
*AUDIO-OUT is only available with the HDMI input.
(You cannot use it with D-SUB, DVI or any other component.)
1
2
AUDIO
OUT
The Left Rear of the Monitor
AUDIO
OUT
UB
A8
Connecting to External Devices
When Connecting to your PC
1. Place the monitor in a convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 1
3. Connect the power cord into a proper power outlet that is easily accessible and close
to the display. 2
1
2
AUDIO
OUT
Varies according to model.
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
2 Power Cord
1 Signal Cable
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
Wall-outlet type
PC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin
high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row
connector.
4. Press button on the front switch panel to turn the power on.
5. Press the INPUT button at the front side of the monitor.
INPUT
A
B
Note
INPUT
OK/AUTO
When connecting with a HDMI/DVI signal input cable.
• Select HDMI : HDMI/DVI digital signal.
When connecting with a D-Sub signal cable.
• Select RGB : D-Sub analogue signal.
RGB
HDMI
Component
How to connect to two computers.
Connect the signal cables (HDMI/DVI and D-Sub) to each computer.
Press the INPUT button at the front side of the monitor.
Directly connect to a grounded power outlet on the wall or
a power bar with a ground wire.
A9
MAC
Connecting to External Devices
When Watching DVD/Video/HDTV
When connecting with a Component cable
1. Connect the Component cables and RCA to Stereo cables properly.
Connect the terminals to the sockets of the same color.
1
2
AUDIO
OUT
2. Connect the power cord.
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
PB
PB
PR
PR
Monitor
Speaker
AUDIO
IN
RCA-Stereo cable
(not included)
Component Cable
(not included)
DVD/VIDEO/HDTV
PB
PB
PR
PR
DVD/VIDEO/HDTV
3. Press the INPUT button at the front side of the monitor.
INPUT
A
INPUT
OK/AUTO
When connecting with a Component cable.
• Select Component.
A10
RGB
HDMI
Component
Connecting to External Devices
When Watching DVD/Video/HDTV
When connecting with a HDMI/DVI cable
1. Connect the HDMI/DVI cables and RCA to Stereo cables properly.
L245WP
1
1
2
2
AUDIO
OUT
AUDIO
OUT
L245WPM
COMPONENT
DC-OUT HDMI/DVI
COMPONENT
DC-OUT HDMI/DVI
Y
PB
PR
Y
PB
PR
D-SUB
D-SUB
AUDIO IN
Speaker
(not included)
HDMI/DVI
cable
RCA-Stereo cable
HDMI/DVI
cable
(not included)
2. Press the INPUT button at the front side of the monitor.
A
(not included)
DVD/VIDEO/HDTV
DVD/VIDEO/HDTV
INPUT
RCA-Stereo cable
OK/AUTO
When connecting with a HDMI/DVI cable.
• Select HDMI.
A11
INPUT
RGB
HDMI
Component
Connecting to External Devices
Connecting the USB(Universal Serial Bus) Cable
"USB (Universal Serial Bus)" is an innovation in connecting your different desktop peripherals
conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and
other peripherals to your display instead of having to connect them to your computer. This will give you
greater flexibility in setting up your system. USB allows you to connect a chain of up to 120 devices on a
single USB port; and you can “hot” plug (attach them while the computer is running) or unplug them while
maintaining the Plug and the Plug auto detection and configuration. This display has an integrated BUSpowered USB hub, allowing up to 2 other USB devices to be attached it.
1.
Connect the upstream port of the display to the downstream port of the USB compliant
PC or another hub using the USB cable. (Computer must have a USB port)
Connect the USB compliant peripherals to the downstream ports of the display.
USB downstream Port
connect the cables from USB
compliant peripherals-such as
keyboard, mouse, etc
1
2
AUDIO
OUT
2.
COMPONENT
MI/DVI
Y
PB
PR
D-SUB
USB upstream Port
To USB downstream port of the USB
compliant PC or another hub cable
3. The monitor’s USB terminal supports USB 2.0 and High Speed cables.
Data Rate
Power
Consumption
High Speed
Full Speed
Low Speed
480Mbps
12Mbps
1.5Mbps
2.5W
(Max,each Port)
2.5W
2.5W
(Max,each Port)
(Max,each Port)
NOTE
To activate the USB hub function, the display must be connected to a USB compliant
PC(OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the shape of the connector at the cable side
matches the shape at the connecting side.
Even if the display is in a power saving mode, USB compliant devices will function when
they are connected the USB ports(both the upstream and downstream) of the display.
A12
Using the speakers - The feature is only for speaker models - L245WPM
Side Jack
Headphone/Earphone Input
Automatically mutes the speaker volume
when the headphones are plugged in.
Rear
Audio Input
- To connect your PC, plug the cable into the
sound card *Line Out on the PC.
- To connect your audio component, plug the
cable into the external audio component.
- To connect HDMI, plug the cable into the
Audio-Out of your monitor.
AUDIO
IN
Speaker Out
*Line Out
<Jack of the PC
sound card>
A13
Connecting to External Devices
To arrange the cables
After connecting the cables neatly, arrange the cables to the Cable
Holder as shown in the following figure.
1
2
AUDIO
OUT
1.
AUDIO-OUT
To connect HDMI,
make sure that the
audio cables are
plugged in as show
in the diagram.
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
* The speaker is only for
speaker models - L245WPM
Cable Holder
*The length of the cable which connects the monitor’s AUDIO-OUT and the
speaker’s AUDIO-IN can be too long. It is used to connect the components
at the appropriate distance when the AUDIO-IN terminal and the speaker
are connected to the PC.
Be cautious to avoid the bumping the speaker against its head when
Notice removing a cable.
A14
Control Panel Functions
Front Panel Controls
INPUT Button
Select the input signal.
INPUT
OK/AUTO
RGB
: 15-pin D-SUB analogue signal
Component : DTV SET-TOP BOX,Video,DVD
HDMI/DVI : HDMI/DVI digital signal
DTV SET-TOP BOX,Video,DVD
MENU Button
Controls locked
Controls unlocked
INPUT
RGB
HDMI
Component
Use this button to enter or exit the On Screen Display.
Controls locked/Controls unlocked
This function allows you to lock the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU+
Button for several seconds. The
message "Controls locked" should appear.
You can unlock the OSD controls at any time by pushing the
MENU+
Button for several seconds. The message
"Controls unlocked" should appear.
A15
Control Panel Functions
Use this button to select an icon or adjust the
setting in the OSD screen.
Button
Button
• Use this button to directly control brightness and
contrast of the PC signal (RGB, HDMI/DVI).
Sub screen
Button
•
(Picture In Picture) Button
The size of the sub-screen can be changed to fit
your needs Button is pressed.
OK/AUTO
Button
Auto in progress
For optimal display
change resolution to 1920x1200
Main screen
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the OK/AUTO button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
- 24 inch monitor : 1920 x 1200@60Hz
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
A16
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Move where
you want to
adjust
Pops up
the menu
screen
Select a
menu icon
Move where
you want to
adjust
Select a
menu icon
Adjust the status
Save
adjustment
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK/AUTO Button.
4
Use the
5
Accept the changes by pressing the OK/AUTO Button.
6
Exit the OSD by pressing the MENU Button.
Buttons.
Buttons to adjust the item to the desired level.
A17
Exit from
the menu
screen.
On Screen Display(OSD) Selection and Adjustment
OSD (On Screen Display) menu
Icon
Function Description
Adjusting Screen Colour.
PICTURE
Selecting the options.
SPECIAL
Screen Adjustment.
SCREEN
Adjusting PIP/DW Mode (Multiple Screen) Functions.
PIP/DW
PIP/DW
NOTE
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently
since it provides graphical presentation.
A18
On Screen Display(OSD) Selection and Adjustment
Adjusting Screen Colour
EZ Video
HDMI, Component input
The EZ Video function automatically adjusts the screen image quality
depending on the AV usage environment.
• Dynamic : Select this option to display with a sharp image.
• Standard : The most general and natural screen display status.
• Mild : Select this option to display with a mild image.
• Game : Select this option to enjoy dynamic image when playing a game.
• User : Select this option to use the user-defined settings.
Contrast
To adjust the contrast of the screen.
Brightness
To adjust the brightness of the screen.
Color
To adjust the color to desired level.
Sharpness
To adjust the clearness of the screen.
ACC
HDMI, Component input
Selecting a factory setting colour set.
• Warm : Slightly reddish white.
• Normal : Slightly bluish white.
• Cool : Slightly purplish white.
NOTE
If the EZ video setting in the Picture menu is set to Dynamic,
Standard, Mild or Game the subsequent menus will be automatically
set.
A19
On Screen Display(OSD) Selection and Adjustment
Adjusting Screen Colour
PC only
CSM
EZ Video
• 6500K/9300K/sRGB
Selecting a factory setting colour set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
sRGB : Set the screen color to fit the
SRGB standard color
• User : Select this option to use
the user-defined settings.
CSM
User
Contrast
To adjust the contrast of the screen.
Brightness
To adjust the brightness of the screen.
Red / Green / Blue
Set your own colour levels.
EZ Video
Contrast
50
Brightness
50
Red
50
Green
50
Blue
50
User
A20
On Screen Display(OSD) Selection and Adjustment
Selecting the options
Input
Child Lock
Language
Power Indicator
Transparency
Reset
DDC-CI
Input
If you press the button once, the
following Input Signal Window will
appear. Select the signal type
you want using the
button.
Input
Child Lock
Language
Power Indicator
Transparency
Reset
DDC-CI
Child lock
This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On'
position. In order to unlock it, do the following :
*Press and hold the MENU+
Button for several seconds. The message
"Controls locked" should appear.
Language
To choose the language in which the control names are displayed.
Power
Indicator
Use this function to set the power indicator on the front side of the product to
On or Off.
Transparency
To adjust the transparency of the OSD menu screen.
Reset
Use this function to reset the product to the factory default. However, language
selection will not be initialized.
DDC-CI
DDC/CI(Display Data Channel Command Interface) is communication protocol for
communications between PC and monitor.
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the
monitor OSD.
Monitor can be adjusted with PC by connecting communication between PC and monitor
when DDC/CI is ON, and monitor cannot be adjusted with PC because communication
between PC and monitor is disconnected when DDC/CI is OFF.
A21
On Screen Display(OSD) Selection and Adjustment
Screen Adjustment
SCREEN
ARC
Auto-configure
Clock
Phase
Position
HDMI
ARC
To select the image size of the screen.
<HDMI(Video), Component input only>
<HDMI(PC), RGB input only>
SCREEN
SCREEN
ARC
Full
ARC
Auto-configure
Original
Auto-configure
Full
Clock
Clock
Phase
Phase
Position
Position
HDMI
HDMI
Full
Full
Original
1:1
AutoConfigure
This function is suitable for analogue signal input only. This button is for the
automatic adjustment of the screen Position, Clock and Phase.
Clock
This function is suitable for analogue signal input only. To minimize any vertical bars or
stripes visible on the screen background. The horizontal screen size will also change.
Phase
This function is suitable for analogue signal input only. To adjust the focus of the
display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
Position
This function is suitable for analogue signal
input only. To adjust position of the screen.
Press the /PIP button to display the submenu for position.
SCREEN
ARC
Auto-configure
Clock
Phase
Left
Moving the screen position horizontally.
Right
Position
HDMI
H-Position
V-Position
Up
Moving the screen position vertically.
Down
A22
On Screen Display(OSD) Selection and Adjustment
Screen Adjustment
HDMI
Video: Used when it is connected with DVD or SET-TOP BOX through HDMI.
* If you want to connect VCR, select VIDEO in this menu. Otherwise,
you may see noise in the margin of the screen due to the difference in the
screen size .
PC : Used when it is connected with PC through HDMI.
* If you want to connect PC, select PC in this menu. Otherwise, the screen
may be too large to support PC sub screen
NOTE
When the Interlace Signal is inputted at the RGB source input level,
the Auto-Configure, Clock, Phase and Position menu can't be used.
A23
On Screen Display(OSD) Selection and Adjustment
Adjusting PIP/DW Mode (Multiple Screen) Functions
(To adjust the sub screen)
On/Off
On/Off
Off
PIP Input
PIP
Position
DW
PIP
After selecting PIP in the PIP/DW On/Off menu, the
following menu items can be adjusted.
DW
After selecting DW in the PIP/DW On/Off menu,
the following menu items can be adjusted.
PIP Input
To select an input signal for PIP/DW.
To adjust the position of PIP screen.
Position
On/Off
PIP Input
Position
NOTE
When the Interlace signal, such as the Set-top Box, is inputted at the RGB
and HDMI source input level, the following will be shown.
(1) If Interlace Signal is inputted in RGB, PIP/DW cannot be used.
(2) If Interlace Signal is inputted in HDMI, PIP/DW cannot be used.
(3) When Component is selected as the main screen for PIP/DW.
If the sub-screen is an Interlace Signal inputted RGB or HDMI, the screen
will be displayed but the contents will not be displayed.
A24
Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
Is the power on and the • Adjust the brightness and the contrast.
power indicator blue or
green?
Is the power indicator
amber?
• If the display is in power saving mode, move the
mouse or press any key on the keyboard to
activate the screen.
• Turn on the PC.
Do you see an "OUT
OF RANGE" message
on the screen?
• This message appear when the signal from the PC
(video card) is out of the diplay's horizontal or
vertical frequency range. See the 'Specifications'
section of this manual and configure the display
again.
Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and the display is not connected.
Check the signal cable and try again.
Do you see a "Controls locked" message on the screen?
Do you see “Controls
locked” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU+
button for several seconds: the message
“Controls unlocked” will appear.
A25
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
• Press the OK/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
• Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the screen
background, vertical
bars or stripes are
visible.
• Press the OK/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the OK/AUTO button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true
color) at Control Panel - Settings.
The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
A26
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Make sure to check if the video card supports
Plug&Play function.
The audio function does not work.
No sound?
• See if the audio cable is connected properly.
• Adjust the volume.
• See if the sound is set properly.
Sound is too low.
• Adjust the volume.
A27
Specifications
L245WP
Display
24 inches (61.3 cm) Flat Panel Active matrix-TFT LCD
Glare coating / Anti-glare coating
24 inches viewable
0.270 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
Resolution
Max
Recommend
Plug&Play
:
≤
≤
Off Mode
85 W(Typ.)
3W
2W
With Stand
Width
Height
Depth
Tilt/Swivel Range
Analog : VESA 1920 x 1200 @60Hz
Digital : VESA 1920 x 1200 @60Hz
VESA 1920 x 1200 @60Hz
DDC 2B
Power Consumption 0n Mode
Sleep Mode
(without USB)
Dimensions
&Weight
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL, Positive/Negative
Composit TTL, Positive/Negative
SOG (Sync On Green), Digital(HDCP)
15 pin D-Sub Connector
HDMI/DVI connector(Digital), Component
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Without Stand
56.00 cm / 22.05 inches
56.00 cm / 22.05 inches
44.45 cm / 17.50 inches(Min)
37.20 cm / 14.65 inches
54.45 cm / 21.44 inches(Max)
27.02 cm / 10.64 inches
8.40 cm / 3.31 inches
Net
Tilt
Swivel range
Height range
Rotate
9.4 kg (20.8 lbs)
-5˚~20˚
350˚
100 mm / 3.94 inches
90˚clockwise(Landscape -> Portrait)
Power Input
AC 100-240V~ 50/60Hz 1.2A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
A28
Specifications
L245WP
Stand Base
Attached (
Power cord
Wall-outlet type or PC-outlet type
USB
Standard
USB 2.0, Self-Power
Data Rate
Max 480 Mbps
), Detached ( O )
Power Consumption Max 2.5W x 2
NOTE
Information in this document is subject to change without notice.
A29
Specifications
L245WPM
Display
24 inches (61.3 cm) Flat Panel Active matrix-TFT LCD
Glare coating / Anti-glare coating
24 inches viewable
0.270 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
Input Form
Resolution
Max
Recommend
Plug&Play
DDC 2B
Power Consumption
(without Speaker &
USB)
Dimensions
&Weight
0n Mode
Sleep Mode
Off Mode
Analog : VESA 1920 x 1200 @60Hz
Digital : VESA 1920 x 1200 @60Hz
VESA 1920 x 1200 @60Hz
:
≤
≤
85 W(Typ.)
3W
2W
With Stand
Width
Height
Depth
Tilt/Swivel Range
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL, Positive/Negative
Composit TTL, Positive/Negative
SOG (Sync On Green), Digital(HDCP)
15 pin D-Sub Connector
HDMI/DVI connector(Digital), Component
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Without Stand
56.00 cm / 22.05 inches
56.00 cm / 22.05 inches
44.45 cm / 17.50 inches(Min)
37.20 cm / 14.65 inches
54.45 cm / 21.44 inches(Max)
27.02 cm / 10.64 inches
8.40 cm / 3.31 inches
Net
Tilt
Swivel range
Height range
Rotate
9.6 kg (21.2 lbs)
-5˚~20˚
350˚
100 mm / 3.94 inches
90˚clockwise(Landscape -> Portrait)
Power Input
AC 100-240V~ 50/60Hz 1.2A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
A30
Specifications
L245WPM
Stand Base
Attached (
Power cord
Wall-outlet type or PC-outlet type
USB
Standard
USB 2.0, Self-Power
Data Rate
Max 480 Mbps
), Detached ( O )
Power Consumption Max 2.5W x 2
Audio
RMS Audio Output
2W+2W(R+L)
Input Sensitivity
0.7Wrms
Speaker Impendance 16Ω
NOTE
Information in this document is subject to change without notice.
A31
Specifications
PC INPUT Preset Modes (Resolution)
Display Modes
(Resolution)
1
2
3
4
5
6
7
8
9
10
640 x 480
640 x 480
720 x 480
720 x 400
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 768
Horizontal
Vertical
Freq. (kHz) Freq. (Hz)
31.47
31.47
37.50
31.47
37.88
46.88
49.72
48.36
60.02
68.68
70.09
59.94
75
70.08
60.32
75
74.55
60
75.03
75.06
Display Modes
(Resolution)
1280 x 768
1280 x 1024
1280 x 1024
1600 x 1200
1600 x 1200
1680 x 1050
1920 x 1200
11
12
13
14
15
16
*17
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
61.80
63.98
79.98
75.00
75.00
65.29
74.04
65.96
60.02
75.02
60
60
60.45
59.95
* Recommend Mode
Component Video INPUT
HDMI Video INPUT
Display Modes
(Resolution)
1
2
3
4
5
6
7
8
9
10
480i
576i
480p
576p
720p
720p
1080i
1080i
1080p
1080p
Horizontal
Freq. (kHz)
15.75
15.62
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
Vertical
Freq. (Hz)
1
2
3
4
5
6
7
8
60.00
50.00
60.00
50.00
50.00
60.00
50.00
60.00
50.00
60.00
Indicator
MODE
On Mode
Sleep Mode
Off Mode
Display Modes
(Resolution)
LED Color
Blue
Amber
Off
A32
480i
576i
480p
576p
720p
720p
1080i
1080i
Horizontal
Freq. (kHz)
15.75
15.62
31.50
31.25
37.50
45.00
28.12
33.75
Vertical
Freq. (Hz)
60.00
50.00
60.00
50.00
50.00
60.00
50.00
60.00
Specifications
HDMI Type Pin Assignment
No.19
No.1
No.2
No.18
Type A pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Signal Name
T. M. D. S. Data2+
T. M. D. S. Data2 Shield
T. M. D. S. Data2T. M. D. S. Data1+
T. M. D. S. Data1 Shield
T. M. D. S. Data1T. M. D. S. Data0+
T. M. D. S. Data0 Shield
T. M. D. S. Data0T. M. D. S. Clock+
T. M. D. S. Clock Shield
T. M. D. S. ClockCEC
Reserved(In cable but N.C. on device)
SCL
SDA
DDC/CEC Ground
+5V Power
Hot Plug Detect
Wire
Type A pin
A
B
A
A
B
A
A
B
A
A
B
A
C
C
C
C
D
5V
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
T. M. D. S. (Transition Minimized Differential Signaling)
USB Connector Pin Assignment
UP stream
2
1
3
4
Down stream
#1:VCC
#3:Data +
1 2 3 4
Series B connector Series A connector
Female Connector View
A33
#2 : Data #4 : GND
How to Install the VESA Standard wall mounting
This monitor meets VESA-compliant mounting interface pad
specifications.
After moving the product to face
downward, make sure to place it on a soft
cloth or a cushion to avoid surface
damage.
1
2
AUDIO
OUT
1.
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
2. Separate the head and the stand with the
1
2
AUDIO
OUT
use of a screwdriver.
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
VESA wall mounting
Connected to another object (stand type and
wall-mounted type. This monitor accepts a
VESA-compliant mounting interface pad.This has to be purchased separately if
required.)
For further information, refer to the VESA Wall
Mounting Instruction Guide.
1
2
AUDIO
OUT
3. Set up the VESA standard Stand Base.
COMPONENT
DC-OUT
HDMI/DVI
Y
PB
PR
D-SUB
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately at most
computer stores.
A34
Digitally yours
Download PDF