LG | DK172 | LG DK172 Owner’s Manual

DV172KPM_NA4MLL_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DK172
Before
connecting, operating
adjusting this product,
booklet carefully and completely.
please
read this instruction
or
CAUTION: The
CAUTION
(dripping
as
vases,
concerning
not be
exposed to water
objects filled with liquids, such
the
apparatus.
the Power Cord
Most
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
splashing) and no
should be placed on
or
CAUTION
CAUTION: TO REDUCE THE RISK
apparatus should
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
certain.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation
triangle
point
within
an
is intended to alert the
equilateral
user
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
the
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
and to
ensure
it from
over
in the cabinet
reliable
operation
provided for ventilation
the product and to protect
are
of
heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION:
This
To
product employs
a
Laser
System.
product, please
read this
proper use of this
owner 's manual carefully and retain it for future reference.
ensure
Should the unit
require maintenance,
contact
an
authorized
service center.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
or
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
outlets,
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
easily
CAUTION:
openings
outlets, loose
walked upon. Pay particular attention to plugs, wall
and the point where the cord exits the appliance.
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
Slots and
Do not overload wall outlets. Overloaded wall
accessible.
Contents
Introduction..................4-7
Operation..................14-21
AbouttheSymbolDisplay............4
GeneralFeatures.....................14
SymbolusedinthisManual..............4
AdditionalFeatures...................15
NotesonDiscs........................4
.16
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback................17
.17
RepeatProgrammedTracks
.17
Erasing a Track from Program List
.17
Erasing the Complete Program List
ViewingaJPEGfile...................18
HandlingDiscs......................4
StoringDiscs........................4
CleaningDiscs......................4
MaintenanceandService................4
TypesofPlayableDiscs.................5
RegionalCode........................5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow........................18
FrontPanel...........................6
StillPicture.........................18
RemoteControl........................7
MovingtoanotherFile................18
RemoteControlOperation..............7
Remote Control Battery Installation
.7
Zoom.............................18
.
InstallationandSetup.
.
.
.
.
.
.
.
.
.
.
.
.8-13
.
SettingupthePlayer...................8
DVDPlayerConnections................8
Video and Audio Connections to Your TV
Audio Connection to
Optional Equipment
.
.
.
.8
.
.
LANGUAGE.......................11
?MenuLanguage...................11
?
DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
.
......
.
.
.9
.10
Displaying Disc Information on-screen
InitialSettings........................10
GeneralOperation...................10
.
Torotatepicture.....................18
To listen to MP3/WMA music watching
picture............................18
PlayingaDivXMoviefile...............19
..20
UsingtheKaraokeFunction.
Controlling other TVs with the remote control .21
VideoModeSetting......................21
.11
Reference..................22-23
LanguageCodes.......................22
AreaCodes...........................22
Troubleshooting.......................23
Specifications.........................23
DISPLAY..........................11
?TVAspect.......................11
?DisplayMode.....................11
?ProgressiveScan..................11
?TVOutputSelect...................11
AUDIO...........................12
.12
?DolbyDigital/DTS/MPEG
.12
SampleFreq.(Frequency).
.12
Dynamic Range Control (DRC)
LOCK(ParentalControl)..............12
?Rating..........................12
.12
Password(SecurityCode).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.
?
?
.
.
.
.
?AreaCode.......................13
OTHERS..........................13
?PBC............................13
?AutoPlay........................13
B.L.E. (Black Level Expansion)
.13
?DivX(R)VOD.....................13
?
.
.
.
.
.
.
?Score...........................13
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
ensure
reference.
This manual
provides
information
on
the
operation
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the
"
Symbol Display
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
on
that
specific
DVD video disc.
Symbol
Used in this Manual
special
Indicates
notes and
tips
and hints for
A section whose title has
is
applicable only
symbol.
operating
features.
making
of the
following symbols
represented by the
one
to the disc
the task easier.
All discs listed below
a
Handling
the Unit
When
Please
DVD and finalized DVD±R/RW
VCD
Video CDs
WMA files
DivX
DivX files
Notes
on
the
the exterior surfaces clean
use
near
volatile
liquids
such
as
insecticide
the unit.
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Discs
or
Do not touch the
playback side of the disc. Hold
edges so that fingerprints do not get
the
disc
on
the surface. Never stick paper
the unit
Do not leave rubber
?
Discs
the
save
spray
Do not
Handling
shipping
Do not
MP3 files
WMA
before
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
Audio CDs
chapter
service technician.
contacting
Keeping
DVD
by
records.
Maintenance and Service
Tip:
MP3
vinyl
Refer to the information in this
Indicates
ACD
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
Note:
ALL
Do not
or
tape
on
the disc.
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
The unit is
high-tech, precision
a
device. If the
pick-up lens and disc drive parts are dirty
picture quality could be diminished.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
4
or
optical
worn, the
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
use.
contact your nearest authorized
of
Types
Notes
Discs
Playable
on
Copyrights:
It is forbidden
law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
DVD
material without
(8cm/12cmdisc)
Video CD
(VCD/SVCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this unit plays DVD±R/RW and CD-R/RW
that contains audio titles, DivX, MP3, WMA, and/or
JPEG files.
Notes:
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
Do not
use
shaped
or
?
CDs
irregularly shaped
octagonal) since they
(e.g.,
by
permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
heart-
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
may result in
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
malfunctions.
SCAN PICTURE
Regional
This unit has
unit. This unit
the
as
rear
Code
RECOMMENDED THAT THE USER SWITCH THE
code
regional
can play only
a
of the unit
or
printed
on
the
rear
DVD discs labelled
of the
same
CONNECTION TO THE 'STANDARD DEFINITION'
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
"ALL".
525p
Notes
?
on
Regional
numbers in it
clearly
a
globe
visible
on
number must match your DVD
code or the disc cannot play.
?
AND
625p
DVD
PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
Codes
Most DVD discs have
PROBLEMS, IT IS
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
Regional
Code" appears
on
the TV
screen.
5
Front Panel
ab c d e
jkf
a
ghi
f
POWER
Switches the unit ON and OFF.
b
c
d
e
Disc
Tray
Insert
a
N
g
x
(STOP)
Stops playback.
h Display
SKIP
i
(PLAY)
Starts playback.
(OPEN / CLOSE)
Opens or closes the disc tray.
window
or
track
or
Remote Sensor
Point the remote control here.
j Microphone jack(s)
Connect
SKIP
Go
Z
Shows the current status of the unit.
(.)
Returns to beginning of current chapter
go to previous chapter or track.
(>)
to next chapter
disc here.
or
track.
a
microphone(s)
k Microphone
volume control
Adjusts microphone
6
to MIC
volume.
socket(s).
Remote Control
SCAN(m/M)
Search backward
POWER
Switches DVD
OPEN/CLOSE
Opens
SKIP(./>)
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
ON and OFF
Player
and closes the disc
(Z)
tray.
track.
0-9 numerical buttons
Selects numbered
on
the
PAUSE/STEP(X)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
on
the
N
in
options
a
menu.
CLEAR
Removes
a
track number
List
Program
mark
or a
Marker Search
(PLAY)
Starts playback.
menu.
TV Control Buttons
POWER: Turns the TV
on or
AV: Selects the TV's
forward.
or
STOP
(x)
Stops playback.
off.
source.
PR/CH +/--: Selects TV's channel.
VOL +/--:
Adjusts
AUDIO
TV's volume.
Selects
audio
an
language
or an
audio channel.
SUBTITLE
Selects
a
subtitle
a
DVD
language.
ANGLE
Selects
camera
if
angle,
available.
SETUP
DVD MENU
Accesses
menu on a
Accesses
DVD disc.
the disc's Title menu, if
available.
Marks any
Displays
Displays
the
menu
of
a
menu.
Enter to program edit mode.
Display.
Removes the
MARKER SEARCH
PROGRAM
DISPLAY
RETURN
point during playback.
SEARCH
(left/right/up/down)
an option in the menu.
Accesses On-Screen
Setup
MARKER
b / B / v / V
Selects
the
menu.
TITLE
Displays
or removes
ZOOM
Enlarges
(O)
DVD video
image.
REPEAT
menu.
video CD
Repeat chapter, track, title,
with PBC.
all.
A-B
Repeat sequence
point B.
from
point
A to
RANDOM
Plays
tracks in random order.
KARAOKE
Accesses
Remote Control
Point the remote control at the remote
KARAOKE
sensor
Battery installation
Detach the battery cover on
and
press the buttons.
menu.
the
rear
of the
control, and insert two batteries
(size AAA) with 3 and # aligned correctly.
remote
AAA AAA
Caution:
different
or removes
Remote Control
Operation
Do not mix old and
(ECHO)
new
batteries and
types of batteries such
as
never
mix
standard, alkaline,
etc.
7
Installation and
up the
Setting
The
Setup
Video and Audio Connections
Player
nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
picture
DVD
and sound of
a
Player Connections
the unit is connected
necessary for additional connection
to the TV and
directly
not to a VCR, otherwise the DVD image
distorted by the copy protection system.
sure
--
cable
could be
Connect the VIDEO OUT
to the video in
Depending
your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
as
Make
Video
on
devices
to Your TV
jack
the TV
on
jack on the
using the video
unit
(V).
S-Video: Connect the S-VIDEO OUT
jack
DVD
the TV
Player
to the S-Video in
the S-Video cable
the
on
jack
on
using
right
AUDIO OUT
(S).
information.
Audio
jacks
on
--
Connect the left and
of the unit to the audio left and
the TV
Component
setup
menu
to
use
Output
8
to page
11.)
option
on
the
COMPONENT VIDEO
OUT/PROGRESSIVE SCAN
(Refer
Select
jack
or
S-Video
jack.
system.
Connect the COMPONENT
unit to the
the TV
Y Pb
jacks
phone
jacks
corresponding
Pr cable (C).
Progressive
You must set the TV
--
to the
VIDEO OUT/PROGRESSIVE SCAN
an
Caution:
jack
of your audio
jack (record deck)
Video
IN
the audio cables. Do not
(A) using
connect the unit's AUDIO OUT
in
right
in
jacks
on
the
on
using
Scan
If your television is
?
high-definition or "digital
ready" television, you may take advantage of
the DVD player's progressive scan output for
the highest video resolution possible.
?
Set the
?
Progressive scan does not work with the
analog video connections (yellow VIDEO
jack).
a
Progressive Scan to "On" on
menu for progressive scan signal.
(Refer to page 11)
the
setup
OUT
Audio Connection to
Optional
Equipment
Connect the DVD
for audio
player
to your
optional equipment
output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
player
Digital Multi-channel
A digital multi-channel
sound quality. For this
/ video receiver that
sound
connection
provides
you need
multi-channel audio
supports
a
one or more
the best
of the
audio formats
X
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
A
InstaliodSeup
Notes:
?
If the audio format of the
the
a
COAXIAL
R
produces
L
?
DIGITAL INPUT
does not match
of your receiver, the receiver
distorted sound or no sound at all.
capabilities
strong,
digital output
AUDIO INPUT
Amplifier (Receiver)
Six Channel
Digital Surround Sound via a digital
connection can only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
is
Manufactured under license from
Laboratories.
the double-D
Dolby
Dolby
Logic", and
"Dolby", "Pro
symbol are trademarks
of
Laboratories.
DTS and DTS
of
Digital Out are trademarks
Digital Theater Systems, Inc.
9
Disc Information
Displaying
Initial
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
type
displayed differ depending
playing status.
or
on
the disc
Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 11 to 13.
To
display
and exit the Menu
Press SETUP to
display
the
:
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level :
Press B on the remote control.
1/3
1/12
To go back to the previous level
Press b on the remote control.
0:20:09
General
1 ENG
ABC
:
Operation
1.
Press SETUP. The
2.
Use v / V to select the desired
Setup
menu
appears.
1/1
3D SUR.
2.
You
select
can
change
Title
an
item
select the
or
(Track)
by pressing v / V and
setting by pressing b / B.
Current title
(or track)
number/total number of titles (or tracks)
Chapter Current chapter number/total number
of chapters
Time
Elapsed playing time
Audio
Selected audio language or channel
--
--
B to
--
the current
--
Subtitle
Angle
--
Sound
--
--
alternate
Selected subtitle
Selected
angle/total
number of
angles
Selected sound mode
no
button is
screen
10
pressed for a
display disappears.
few
seconds, the
3.
setting for
setting(s).
the selected
item,
Use v / V to select the second desired
press B to
Note:
If
move
then press
to the second level. The screen shows
option
move
well
option
as
then
to the third level.
4.
Use v / V to select the desired
setting
5.
Press SETUP to exit the
menu.
on-
as
then press
ENTER to confirm your selection. Some items
require additional steps.
Setup
Progressive
LANGUAGE
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
On.
To Turn ON
progressive
scan:
Connect
component out of the DVD to the input of
your TV or monitor, set your TV or monitor to
Menu
Language
Select
a
language
Component Input.
for the
Setup
menu
and
on-screen
display.
1. Select
"Progressive
Scan"
the DISPLAY
on
menu
then press B.
Disc Audio / Subtitle / Menu
2. Select "On"
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
the disc
Other
Refers to the
--
was
the v / V buttons.
track
original language
3. Press ENTER to confirm your selection.
The confirm menu will appear.
InstaliodSeup
in which
4. When the confirm
recorded.
language, press number
buttons then ENTER to enter the corresponding 4digit number according to the language code list
on page 22. If you enter the wrong language code,
--
using
menu
Cancel is
To select another
highlighted as
to highlight Enter.
buttons
5.
ENTER will set the
Pressing
scan
appears on your screen
default. Use the b / B
player
to
Progressive
mode.
press CLEAR.
Caution:
Once the
setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
DISPLAY
Scan to On in error, you must reset the unit.
First, remove the disc in the DVD Player.
Next, press STOP ( x ) and hold it for five seconds
before releasing it. The video output will be restored
to the standard
be visible
TV
TV
4:3
16:9
--
a
Select when
standard 4:3 TV is connected.
player's
a
16:9 wide TV is connected.
YPbPr
Display
Display
TV
Mode
setting
only
when the TV
Aspect
Select
options according
to
type.
--
jacks
S-Video
works
Output
When your TV is connected with the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
Mode
picture will once again
analog TV or monitor.
a
conventional
the TV connection
Select when
--
and
Select
Output
Set the
Aspect
on a
setting,
S-Video
--
on
this unit.
When your TV is connected with the
jack.
mode is set to "4:3".
Letterbox
the upper
Panscan
on
Displays a wide picture with bands
and lower portions of the screen.
--
--
Automatically displays
the entire
screen
on
the wide
and cuts off the
picture
portions that
do not fit.
11
AUDIO
LOCK
Each DVD disc has
(Parental Control)
variety of audio output options.
player's AUDIO options according to the type
Set the
of audio
system you
a
use.
Rating
Blocks
Dolby Digital
/ DTS / MPEG
Bitstream
Select "Bitstream" if you connect this
DVD player's DIGITAL OUT jack to an amplifier or
other
--
equipment
with
Dolby Digital,
a
DTS
MPEG decoder.
PCM
MPEG) Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
(for Dolby Digital
/
not
are
1. Select
the LOCK
"Rating"
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
the LOCK
options,
is
Rating
1-8:
restrictions
made, this unit automatically converts any
kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is
kHz signals, select 96 kHz.
capable
of
handling
unlock, parental control is
plays
not active
in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
96
amplifier
to
verify
can
enter
or
change password.
1. Select Password
(DRC)
hear
You
2. To make
a
program's
a new
on
the LOCK
menu
then press B.
password:
Press ENTER when the "New"
Enter
option is
password using
the
soundtrack in the most accurate and realistic
highlighted.
presentation possible. However, you may wish to
compress the dynamic range of the audio output (the
numbered buttons then press ENTER. Enter the
password again
difference between the loudest sounds and the
To
This allows you to listen to a movie at
lower volume without losing clarity of sound. Set
quietest ones).
a
DRC to On for this effect.
change
to
a new
verify.
the
password:
Press ENTER when the "Change" option is
highlighted. Enter a current password using
the
numbered buttons then press ENTER. Enter a new
password using the numbered buttons then press
ENTER. Enter the password again to verify.
3. Press SETUP to exit the
12
the v / V buttons.
Password
Check the documentation for your
its capabilities.
can
using
Rating one (1) has the most
and rating eight (8) is the least
If you select
and the disc
choice is
from 1 to 8
rating
a
Unlock
format, you
then
password
a
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
With the DVD
menu
and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
Input
restrictive.
Control
rated.
you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
access
3. Select
Dynamic Range
their
press B.
Sample Freq. (Frequency)
96
on
on
--
audio.
Off
content. Not all discs
2. To
or
of rated DVDs based
playback
menu.
If you
B.L.E.
forget your password
If you
forget your password,
following steps:
1.
Press SETUP to
2.
Input
the
6-digit
display
can
you
clear it
the
using
Setup
menu.
On:
number "210499" and the
security
code is cleared.
Enter the code of the
whose standards
area
used to rate the DVD video
Select "Area Code"
disc, based
on
were
the list
3.
4.
on
the LOCK
2
step
as
shown
previous
Select the first character
off)
IRE cut
(7.5
off)
menu
using
page
system only.
VOD
DivX(R)
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
VOD service. For more
We
then
(Rating).
v / V buttons.
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R)
VOD"
option
then press B.
registration code will appear.
Use the registration code to purchase
Press ENTER and select the second character
using
5.
Off: Standard grey scale.
IRE cut
(0
Set your
on
press B.
Follow
grey scale.
Expanded
The B.L.E. function works NTSC
page 22.
2.
and monitor's
playback pictures.
ability.
Note:
Area Code
1.
Expansion)
To select the black level of
preference
the
Level
(Black
v / V buttons.
videos from DivX
or
InstaliodSeup
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
Press ENTER to confirm your Area code selection.
download the video onto
disc for
a
playback
on
this unit.
Press ENTER to exit.
3.
OTHERS
Note:
All the downloaded videos from DivX
be
played
back
on
VOD
can
only
this unit.
Score
When
score
chapter/title/track
a
will appear in the
is
completely finished,
screen
with
On: Turn the "Score" function
Playback
Control
(PBC)
to On
On: Video CDs with PBC
are
or
Available discs for the
Off.
played according
to
the PBC.
Off: Video CDs with PBC
way
as
are
played
the
?
DVD discs
?
DVD Karaoke Discs
?
VCD discs with
You
Play
?
function:
than 2 tracks
function is available
If the
only
when
a
is connected.
is under 80, the fanfare sound will not
out. The fanfare sounds are differ by the
score
score.
Play
mode is set to
On, this DVD player will
search for title that has the
back the title
longest playback
automatically.
time and
?
If the
score
microphone
disc, the
function is set to "On" and the
is connected while
score
may appear
on
playing
the
a
screen
normal
in the
middle of
Note:
The Auto
score
comes
inserted.
play
The
microphone
can
If Auto
more
score
Note:
Audio CDs.
set up the DVD player so a DVD disc
automatically starts playing whenever the DVD is
then
on.
same
?
Auto
fanfare sound.
Off: Turn the "Score" function off.
PBC
Set
a
the
Play
function may not work for
some
DVDs.
playback.
To prevent this problem, set the score
"Off" or disconnect the microphone.
function to
13
Operations
General features
Buttons
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
During playback,
Press X
SKIP
Discs
Operations
/
>)
tray.
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP . twice
briefly
to
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m
select the required scan speed.
DVD, DivX disc; 4 steps
Video CD, MP3, WMA, Audio CD
or
; 3
M) repeatedly
steps
While the
playback is paused, press SCAN (m
repeatedly to play in slow motion (4 steps).
REPEAT
or
M)
(forward only)
press REPEAT repeatedly to select
desired repeat mode.
DVD Video discs: Chapter/Title/Off
During playback,
Video
to
a
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
A-B
During playback, each press of A-B button to select point A
and point B and repeats a sequence from point A (Starting
point) to point B (End point).
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image (4 steps).
You can move through the zoomed picture using bBvV
buttons.
RANDOM
During playback or
random playback.
TITLE
If the current DVD title has
on
DVD MENU
(ANGLE)
screen.
The disc
menu
stop mode, press RANDOM for
Otherwise,
appears
menu, the title menu appears
the disc menu may appears.
on
a
the
screen.
During playback
of DVD disc contains
different
angles,
a
14
the
in
camera
desired
press ANGLE
scenes
recorded
repeatedly
to select
angle.
(SUBTITLE)
During playback, press SUBTITLE repeatedly
desired subtitle language.
(AUDIO)
During playback, press AUDIO repeatedly
audio language or audio track.
to select
to hear
a
a
different
Notes on general features:
?
On
on
a
Video CD with
the
"PBC"
setup
on
to
menu
page
PBC, you
use
must set PBC to Off
repeat function (See
13).
(>)
(Track) playback,
the
during Repeat Chapter
repeat playback cancels.
once
Zoom may not work
?
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
the TV
on
at different
You
on some
screen
angles
switching is possible.
as an
DVDs.
during
Marker
a
start
can
from up to nine memorized
marker, press MARKER at the
playback
To enter
desired
point
the TV
screen
a
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
scenes
indication that
recorded
To Recall
or
1.
During
disc
search
menu
angle
2.
Clear
Within 10
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
b / B to select
number that you want to recall
scene.
3D surround effect that simulates multi-
a
playback
channel audio from two stereo
speakers (instead of
five+ speakers normally required for multi-channel
audio from a home theater system).
4.
the
You
play
can
Last Scene
Press DISPLAY
Use 3
The sound
3.
Use 1
or
during playback.
player
memorizes last
option
will be
memorized, the
scene
effect, select "Normal".
This
player
on
the
until
playback, press AUDIO
"3D SUR." disappears from
The
the
at any chosen time
on
the disc:
2.
Press v / V to select the time clock icon and
during playback.
player
TV
recalled.
before
scene
of
commencing
a
disc if
to
play
appears when you leave the DVD
mode for about five minutes. If the
in
Stop
Use numerical buttons to
input
the
time in
for five
minutes, the DVD
itself off.
Select
required
system. If NO
appropriate system mode for your
DISC appears in the display window,
press and hold PAUSE/STEP for more than 5 seconds
to be able to select a system (PAL, NTSC, or AUTO).
"-:--:--" appears.
start
hours, minutes, and seconds from left
right. If you enter the wrong numbers, press
4.
automatically
scene
You must select the
Press DISPLAY
input
disc that has the
screen saver
System
1.
CLEAR to
a
displayed
Player automatically turns
Time Search
3.
is
player
Screen Saver is
menu screen.
playing
from the last disc
Screen Saver
menu screen.
To return to normal
To start
on
during playback.
"3D SUR." appears
repeatedly
scene
does not memorize the
you switch off the
the disc.
2.
its number
Note:
2 to select "3D SUR.".
Press AUDIO
by inputting
scene
if you remove
off the player. If you load
option.
highlighted.
To turn off the 3D Surround
1.
starts from the marked
remains in memory
the disc from the player or switch
even
4 to select the sound
or
clear.
Memory
that is viewed. The last
2.
marker
Or, Press CLEAR and the marker number is
any marker
the marker search menu.
This
1.
or
a
erased from the list.
3D Surround
produce
Press ENTER and
3.
Additional features
To
on
markers.
?
will blink
To enter
points.
If you press SKIP
?
the
Marker Search
to
the numbers you entered. Then
the correct numbers.
remove
Press ENTER to confirm.
Playback
starts from the
selected time.
15
Playing
an
Audio CD
or
MP3 / WMA disc
MP3/WMA file
limited
?
This unit
can
play
Audio CDs
or
MP3/WMA files
with this
compatibility
player
is
follows:
as
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
recorded media.
?
-
-
MP3/ WMA/ Audio CD
?
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
ENTER and
playback
playback
or
track/file then press PLAY or
starts. You can use variable
a
?
?
functions. Refer to page 14-15.
creates
?
File
an
names
and must
?
They
ISO 9660 file
should have
incorporate
an
should not contain
system.
a
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
?
When
track
playing
a
titles, you
file
containing
can see
information such
the information
as
by pressing
DISPLAY.
[ Title, Artist, Album, Year,
Comment
]
the disc should be
?
This unit
requires
discs and
recordings
to meet
certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files)
Tips:
and these
?
Press DVD MENU to
?
On
move
to the next page.
require certain pre-existing conditions
(see above) to ensure compatible playback.
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
Customers should note that
PHOTO word
required
a
on
top
of the
menu
is
highlighted.
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
owner.
16
on
less than 650.
ID3 TAG
?
The total number of files
always
be
sought
from the
copyright
Repeat Programmed
Programmed Playback
Press REPEAT to select
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program
1.
Insert
Audio CD
an
or
media. AUDIO CD
2.
?
?
contain 30 tracks.
can
or
?
MP3/WMA files recorded
MUSIC
Press PROGRAM. The
menu
mode, then the
appears.
to exit the program edit
playback
is
The program menu appears. Press
PROGRAM again and hold it down for a few
seconds to exit the
a
the
setup
3.
Video CD with
menu.
menu
"PBC"
Select
a
on
to
the
use
page
track
PBC, you
on
does not
play repeatedly.
Track from
"Program"
playback,
List
Use vVbBto select the track that you wish to
erase from the Program list.
2.
Press CLEAR.
on
the
Repeat step
1-2 to
erase
additional
the list.
Complete Program
Use vVbBto select "Clear
must set PBC to Off
Track
Repeat
1.
Erasing
Note:
On
a
tracks
stopped.
(See
Off(No display):
disappear.
Video CD: Press PROGRAM while
repeat mode.
repeats the current track
All: repeats all the tracks on the "Program" list.
If you press > once during
the repeat playback cancels.
mark will appear.
mark will
desired
Note:
Note:
again
a
Track:
Erasing
Press PROGRAM
Tracks
List
All", then press ENTER.
Note:
on
programmed playback
The programs are also cleared when the power is off
or the disc is removed.
13).
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
playing
Playback begins
programmed the tracks.
"Program"
list have
To
normal
resume
playback,
the
ENTER to start.
the order in which you
Playback stops after all of the tracks
6.
on
select
a
played
on
the
once.
playback
track
on
in
from
programmed
the list and then press
PLAY.
17
Viewing
This unit
1.
can
Moving
JPEG file
a
Insert
a
menu
appears
Press SKIP
JPEG files recorded media.
play
JPEG files recorded media. The PHOTO
on
the TV
to another File
(. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
screen.
Zoom
During watching pictures, press ZOOM to enlarge the
video image (4 steps).
You can move through the zoomed picture using bB
vVbuttons.
To rotate
picture
Press v / V
2.
3.
4.
Press v / V to select
folder, and press ENTER.
a
counter clockwise.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
picture
To return to the PHOTO
If you
menu
while
or
PLAY.
watching
press STOP.
in
are
previous
a
file list and want to return to the
Folder
list,
use
v / V buttons to
1.
Press DVD MENU to
There
are
(Fast),
>>
move
three Slide
Speed options
(Normal) and > (Slow).
Use vVbBto
highlight
select the
you want to
option
.
Then,
use
containing
the two
watching
types of file in
player.
2.
Press TITLE to
3.
Press v / V to select
4.
Use B to select
Playback
highlight
to the next page.
Insert the disc
the
STOP is
and press ENTER.
?
or
to rotate the
picture
To listen to MP3/WMA music while
Tips:
?
clockwise
a
A list of files in the folder appears.
pictures,
?
picture
during showing
display
PHOTO
a
photo
menu.
file.
icon then press ENTER.
starts. The playback will continue until
pressed.
Tip:
: >>>
To listen to
only
the desired music while
watching
program the desired tracks from the "MUSIC"
and then proceed as above.
picture,
menu
use
b / B to
then press
ENTER.
?
On
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
?
While
the
top
on
watching
help menu.
a
of the
picture,
menu
is
highlighted.
JPEG disc
limited
?
press RETURN to hide
as
highlight
the
(Slide Show)
then
Still Picture
2.
follows:
upon the size and number of JPEG
files, it could take a long time for this unit to read
the disc's contents. If you do not see an on-
2048
?
will
now
during
slide show.
minutes,
some
of the
pixels
and burn another disc.
The total number of files
on
the disc should be
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
Ensure that all the selected files have the
go into PAUSE mode.
To return to the slide
PAUSE/STEP
show, press PLAY
or
press
extensions when
again.
?
?
copying
into the CD
".jpg"
layout.
If the files have
rename
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
18
after several
display
less than 650.
Press PAUSE/STEP
player
is
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
press ENTER.
The
player
---
Use vVbBto
1.
with this
Depending
screen
Slide Show
compatibility
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
player.
JPEG image
Even
though
files in
Playing
this DVD
Using
1.
a
Insert
DivX Movie file
Player
you
can
play
DivX disc
DivX file.
?
menu
appears
on
the TV
screen.
player
is limited
Available resolution size of the DivX file is under
720x576
?
with this
follows:
as
DivX file recorded media. The MOVIE
a
compatibility
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
?
If there is
impossible code to
file, it may be displayed as
display.
"
?
2.
Press v / V to select
a
folder, and press ENTER.
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. You can
use variable playback functions. Refer to page 14-
?
menu
while
frame is
interleaved, either video
If the file is recorded with
in
previous
a
playback,
*
GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
file list and want to return to the
Folder
list,
use
v / V buttons to
DivX
highlight
?
Press DVD MENU to
?
On
move
to the next page.
Playable
CD with
MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE and MUSIC, PHOTO and MOVIE word
on top of the menu is highlighted.
?
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
?
If the disc subtitle
setup
menu
a
does not have the
DivX subtitle
subtitle
language you are going to play, the
language may not be displayed properly.
Notice for
displaying
If the subtitle does not
the DivX subtitle
display properly during
Playable
1-point, 2-point,
or
DivX file
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Dvd Subtitle System(*.txt)
VobSub (*.sub) b Sub/idx, stream
Playable
the subtitle is
Playable
Operation
based format.
Codec format
"DIVX3.xx
"MP43
displayed properly.
called
encoding,
3-point GMC.
.avi, .mpg, .mpeg
press and hold SUBTITLE about 3 seconds
then press b / B to select another language code until
playback,
different levels of GMC
are
usually
encoders, like
Xvid, have this option.
or
There
and press ENTER.
a
audio is
GMC, the unit
MPEG4 standard. Some MPEG4
are
or
supports only 1-point of the record level.
Tips:
If you
30
over
outputted.
press STOP.
?
screen
If the video and audio structure of recorded
file is not
?
To return to the MOVIE
_
normally.
15.
4.
"
per 1 second, this unit may not operate
A list of files in the folder appears.
3.
If the number of the
express in the DivX
mark on the
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Audio format
"Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
?
".
-
-
?
-
-
19
Using
VOICE: If you wish to sing a duet with the
recorded karaoke singer, select a voice you
the Karaoke Function
desire.
1.
Load
2.
Set the MIC VOL control to the minimum level to
a
karaoke disc.
prevent acoustic feedback (e.g.
sound)
before
Connect
3.
a
connecting
microphone
Voice Select
loud
howling
microphone.
the
a
to MIC socket.
Note:
If
a
microphone
is not
connected, the karaoke
V1
Voice1
Voice1
V2
Voice2
Voice2
V1+V2
Voice1
Voice2
Off
None voice
None voice
menu
will not appear.
EFFECT: You
1/2 is
4.
5.
Press PLAY to start
Adjust
playback.
6.
7.
Off
sing a song.
option follow steps
6-
→
FLANGE
KEY: You
can
KARAOKE
Note:
appears.
Controlling the key
amplifier (receiver)
an
desired item
MELODY, VOICE, EFFECT
The
display changes
as
or
→
CHORUS
change
the
key by pressing
the
1/2 buttons.
during playback.
Use 3/4 to select
the
pressed,
Press KARAOKE
menu
Special Effects. Each time
Special Effect changes as
can use
shown below.
MIC VOL control and then
If you want to set KARAOKE
8.
Left
Output
speaker
Right speaker
(ECHO,
KEY).
shown in the chart below.
when DVD
player
with
audio
digital
is connected to
connection, may
mute the sound of the front
left/right speakers
connected with amplifier (receiver).
In that case, you must change the sound mode of the
amplifier (receiver) for the output of the speakers.
cause
9.
Press KARAOKE to exit the KARAOKE
menu.
Note:
?
The
?
The karaoke feature functions
microphone may
playback. (ex. slow)
compatible
?
?
not be available
with karaoke-
discs.
The VOICE and MELODY
available
on some
For
details, refer
more
only
during special
menus
may not be
karaoke discs.
to the information
supplied
with the disc.
?
8.
Use 1/2 to
adjust
value of the item
pressing
can
adjust
the echo volume
by
the 1/2 buttons.
MELODY: If you wish to sing only to the backing
band or orchestra unaccompanied by a vocal
guide melody,
20
set MELODY to Off.
no
microphone's
disc encoded with DTS is
selected.
ECHO: You
There is
sound
output during
playing
back.
a
Controlling
other TVs with the
remote control
You
can
?
control the sound
level, input
power switch of your LG TV with the
control.
You
can
Video Mode
control the sound
source, and
supplied
While
holding
down TV POWER
?
2.
(see
the table
below).
?
To
If
more
them
than
at
one
one
code number is
time until you find the
a
?
listed, try entering
interpolation
the video
change
Video mode
MODE1
Code numbers of controllable TVs
straight
on
or
lines.
De-interlace is
mode, press and hold
→
change
MODE2
→
during
disc
playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
button, press the
Release TV POWER button.
Vertical
means
DISPLAY about 3 seconds
number buttons to select the manufacturer code
for your TV
Dot Crawl is shown
or
video mode.
manufacturer code.
1.
flickering
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
source, and
well. If your TV is
appropriate
discs, the playback picture may be
not
level, input
power switch of non-LG TVs as
listed in the table below, set the
With certain
That
remote
Setting
sequence:
MODE3
→
MODE1
If you turn off the power, the video mode will be
back to initial state (MODE1).
that works
one
with your TV.
Tip:
Manufacturer
Code Number
Detailed
Descriptions
MODE1: The
source
for Video Modes
material of the DVD video
LG / GoldStar
1
Zenith
1,3,4
information.
Samsung
6,7
MODE2: Suitable for
8,9
video based material recorded
Sony
Hitachi
(Default),
2
material
scan
4
or
video
material)
(film
is determined from disc
playing
film based content
by
the
or
progressive
method.
MODE3: Suitable for
comparatively
playing
video based content with
little motion.
Notes:
?
Depending
on
function
the
on
your TV,
TV,
all buttons may not
after entering the correct
some or
even
manufacturer code.
Note:
The video mode
Progressive
setting only
works when the
Scan mode is set to "On" in the
Setup
menu.
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
setting.
Set the
appropriate
code number
again.
21
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
22
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Republic
AF
Area
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
SG
SK
UG
Troubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
Plug the power
securely.
The power is on, but
the DVD player does
?
No disc is inserted.
?
Insert
a
in the
display
disc.
cord into the wall outlet
(Check
the disc indicator
window is
lit.)
not work.
No
picture.
?
The TV is not set to receive DVD
Select the
?
mode
signal output.
?
The video cable is not connected
on
video
appropriate
input
the TV.
?
Connect the video cable
?
Select the correct
securely.
securely.
No sound.
?
The
equipment
connected with the
audio cable is not set to receive DVD
audio receiver
you can listen to the
sound from the DVD player.
signal output.
?
?
The power of the equipment connected
with the audio cable is turned off.
?
The AUDIO
?
wrong
The DVD
does
player
playback.
not start
?
The
?
The remote control is not
the remote
properly.
?
disc is inserted.
level is set.
rating
sensor on
the
at
pointed
DVD player.
equipment
Set the AUDIO
connected with
option
Insert
on
to the correct
the DVD
player
POWER.
?
playable disc. (Check
type and regional code.)
?
Change
?
Point the remote control at the remote
a
sensor
The remote control is too far from the
DVD
the
on
position, then turn
again by pressing
An
unplayable
Turn
so
the audio cable.
set to the
?
The remote control
does not work
options
position.
are
mode of the
input
the DVD
player.
rating
of the DVD
Operate
?
the
the disc
level.
player.
the remote control closer to
player.
Specifications
DIGITAL OUT
General
Power
requirements:
AC 110-240 V
Power
consumption:
8W
,
(COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
50/60 Hz
System
Laser:
Dimensions
(Approx.):
430x35x242mm(17x1.4x9.5inches)
Semiconductor
1.9
Signal system:
Weight (Approx.):
kg (4.2 lbs)
5 % to 90 %
negative,
RCA
jack
x
75 Ω,
sync, Mini DIN
4-pin
x
only)
1
range:
More than 95 dB
(DVD/CD)
Accessories:
Video cable
COMPONENT VIDEO OUT:
(Y)
(Pb)/(Pr)
OUT connectors
Dynamic
(Y)
(p-p),
negative
(C)0.3V(p-p)75Ω
1.0 V
(ANALOG
Harmonic distortion: Less than 0.02%
1
S-VIDEO OUT:
1.0 V
ratio:
More than 90 dB
VIDEO OUT:
Vp-p
PAL/NTSC
Signal-to-noise
75 Ω, sync
nm
CD:8Hzto20kHz
Outputs
1
650
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
laser, wavelength
(p-p),
Ω,negative sync, RCA
0.7 V (p-p), 75 Ω, RCA jack x 2
75
jack
x
1
Batteries
(1),
Audio cable
(1),
Remote control
(1),
(2)
AUDIO OUT:
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
Note: Design and specifications
are
subject
to
change prior
notice.
23
P/NO.
:
3834RD0093M
Download PDF

advertising