LG | DK130 | LG DK130 Owner’s Manual

DV130/140KPD_NA4MLL_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DK130/DK140
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
CAUTION: The
CAUTION
(dripping
as
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
vases,
CAUTION
the Power Cord
appliances recommend they be placed upon
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
Most
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
concerning
a
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
circuits. Check the
PERSONNEL.
specification
page of this owner's
manual to be certain.
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
Do not overload wall outlets. Overloaded wall
loose
damaged
or
wall
outlets,
outlets, extension cords,
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
frayed
shock to persons.
could result in electric shock
The exclamation
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
triangle
point
within
an
is intended to alert the
equilateral
user
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
the
product.
it, discontinue
replaced
with
use
an
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Slots and
and to
openings
ensure
in the cabinet
reliable
operation
are
of the
provided for ventilation
product and to protect
it from
over heating.
openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
The
the manufacturer's instruction have been adhered to.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION:
This
To
product employs
a
Laser
System.
proper use of this product, please read this
owner 's manual carefully and retain it for future reference.
ensure
Should the unit
require maintenance,
contact
an
authorized
service center.
Use of
controls, adjustments
procedures
other than those
or the performance of
specified herein may result
hazardous radiation exposure.
To prevent direct exposure to laser
in
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
Periodically
unplug
appliance, and have the cord
replacement part by an
exact
authorized servicer.
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
fire.
of the
Protect the power cord from
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
or
appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the
plug
is
easily
accessible.
Contents
Introduction..................4-7
Operation..................14-18
AbouttheSymbolDisplay.............4
GeneralFeatures......................14
SymbolusedinthisManual..............4
AdditionalFeatures....................15
NotesonDiscs........................4
.16
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback.................17
.17
Erasing a Track from Program List
ViewingaJPEGfile....................18
MovingtoanotherFile................18
Torotatepicture.....................18
HandlingDiscs.......................4
StoringDiscs........................4
CleaningDiscs.......................4
MaintenanceandService................4
TypesofPlayableDiscs.................5
RegionalCode.........................5
.5
Controlling other TVs with the remote control
.
.
FrontPanel...........................6
.
.
.
.
.
.
.
.
.
.
StillPicture.........................18
Zoom.............................18
UsingtheKaraokeFunction.
.
......
.
.
...19
RemoteControl........................7
RemoteControlOperation..............7
Remote Control Battery Installation
.7
.
InstallationandSetup.
.
.
.
.
.
.
.
.
.
.
.8-13
.
SettingupthePlayer....................8
DVDPlayerConnections.................8
Video and Audio Connections to Your TV
.
Audio Connection to
Reference.................20-21
.
.
LanguageCodes.......................20
AreaCodes...........................20
Troubleshooting........................21
Specifications.........................21
.8
.9
Optional Equipment
.10
Displaying Disc Information on-screen
InitialSettings........................10
GeneralOperation...................10
.
.
.
.
.
LANGUAGE........................10
?MenuLanguage...................10
?
DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
.10
DISPLAY..........................10
?TVAspect........................10
?DisplayMode.....................10
?ProgressiveScan..................11
?TVOutputSelect...................11
AUDIO............................11
.11
?DolbyDigital/DTS/MPEG.
.11
SampleFreq.(Frequency).
.11
DynamicRangeControl(DRC)
LOCK(ParentalControl)..............12
?Rating...........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.
?
?Password........................12
?AreaCode.......................12
OTHERS..........................13
?PBC............................13
?AutoPlay........................13
B.L.E. (Black Level Expansion)
.13
?
.
.
.
.
.
.
.
3
Introduction
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
reference.
This manual
provides
information
the
on
operation
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the
"
"
Symbol Display
may appear on your TV display during
and indicates that the function explained in
operation
this owner's manual is not available
on
that
specific
DVD video disc.
Symbol
spray intended for older
vinyl
records.
Used in this Manual
Maintenance and Service
Note:
Indicates
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
special
notes and
operating
Refer to the information in this
features.
contacting
a
chapter
before
service technician.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
making
one
to the disc
the task easier.
of the following symbols
represented by the
Handling
When
shipping
Please
save
All discs listed below
at the
DVD
DVD and finalized DVD±R/RW
Keeping
ACD
?
Video CDs
Audio CDs
MP3
MP3 files
WMA
WMA files
the
the unit
original shipping
carton and
packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
ALL
VCD
the Unit
?
factory.
the exterior surfaces clean
Do not
use
volatile
liquids
such
as
insecticide
spray near the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
Notes
on
Handling
Discs
Discs
Do not touch the
disc
by
the
surfaces
moistened
side of the disc. Hold the
playback
edges so that fingerprints
the surface. Never stick paper
or
tape
do not
on
get
on
the disc.
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
Do not
use
thinner,
as
strong solvents such
these
Maintaining
might damage
as
alcohol, benzine,
or
the surface of the unit.
the Unit
The unit is
a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
4
every 1,000 hours of
For
details, please
service center.
use.
contact your nearest authorized
of
Types
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Discs
Playable
DEFINITION TELEVISION SETS ARE FULLY
DVD
COMPATIBLE WITH THIS PRODUCT AND MAY
(8cm/12cmdisc)
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
Video CD
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
(VCD/SVCD)
(8cm/12cmdisc)
SCAN PICTURE
Audio CD
CONNECTION TO THE 'STANDARD DEFINITION'
(8cm/12cmdisc)
OUTPUT. IF THERE ARE QUESTIONS REGARDING
In
addition, this unit plays DVD±R/RW and CD-R/RW
that contains audio titles, MP3, WMA, and/or JPEG files.
PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
OUR TV SET COMPATIBILITY WITH THIS MODEL
525p
AND
625p
DVD
PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
Notes:
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
Do not
use
shaped
or
?
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
Controlling
other TVs with the
remote control
You
can
control the sound
level, input
power switch of your LG TV with the
control.
source, and
remote
supplied
malfunctions.
You
Regional
Code
This unit has
regional code printed on the rear of the
play only DVD discs labelled same
unit. This unit
the
as
rear
a
can
of the unit
1.
Notes
?
Regional
on
Codes
Most DVD discs have
numbers in it
clearly
a
visible
with
on
the
Code" appears
on
source, and
holding down TV POWER button, press the
number buttons to select the manufacturer code
(see
the table
below).
one or more
cover.
This
player's regional
the TV
2.
Release TV POWER button.
Code numbers of controllable TVs
If
If you try to play a DVD with a different regional
code from your player, the message "Check
Regional
level, input
While
for your TV
globe
number must match your DVD
code or the disc cannot play.
?
control the sound
manufacturer code.
"ALL".
or
can
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
more
them
than
at
one
one
a
code number is
listed, try entering
time until you find the
one
that works
with your TV.
screen.
Manufacturer
Code Number
law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
LG / GoldStar
1
Zenith
1,3,4
material without
Samsung
6,7
Notes
on
Copyrights:
It is forbidden
by
This
features the
permission.
product
protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
copy
(Default),
Sony
8,9
Hitachi
4
2
Notes:
?
Depending
function
on
on
your
the TV,
TV,
some or
even
after
all buttons may not
the correct
entering
manufacturer code.
?
If you enter a new code number, the code number
entered will be erased.
previously
?
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
setting.
Set the
appropriate
code number
again.
5
Front Panel
abc
e
df
g
h i
ab c
de g
a
f
POWER
Switches the unit ON and OFF.
b
N
(PLAY)
playback.
Starts
c
d
6
Remote Sensor
Point the remote control here.
g Display
window
Shows the current status of the unit.
x (STOP)
Stops playback.
h Microphone jack(s)
Disc
i Microphone
Tray
Insert
e
f h i
Z
a
disc here.
(OPEN / CLOSE)
Opens or closes the disc tray.
Connect
a
microphone(s)
to MIC
volume control
Adjusts microphone
volume.
socket(s).
Remote Control
SCAN(m/M)
POWER
Switches DVD
Player
OPEN/CLOSE
Opens
Search backward
ON and OFF.
and closes the disc
SKIP(./>)
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
(Z)
tray.
0-9 numerical buttons
Selects numbered items in
track.
a menu.
PAUSE/STEP(X)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
CLEAR
Removes
a
track number
List
Program
or a
mark
Marker Search
on
the
on
the
menu.
TV Control Buttons
POWER: Turns the TV
on or
AV: Selects the TV's
N
off.
Adjusts
(PLAY)
playback.
Starts
source.
STOP
(x)
Stops playback.
PR/CH +/--: Selects TV's channel.
VOL +/--:
forward.
or
TV's volume.
AUDIO
Selects
audio
an
language
or an
audio channel.
SUBTITLE
Selects
a
subtitle
a
DVD
language.
ANGLE
Selects
camera
if
angle,
available.
SETUP
DVD MENU
Accesses
menu on a
Accesses
DVD disc.
or removes
the
Setup
menu.
TITLE
Displays
MARKER
title menu, if available.
b / B / v / V
Selects
Marks any
(left/right/up/down)
an
item in the
point during playback.
SEARCH
menu.
Displays
DISPLAY
MARKER SEARCH
menu.
PROGRAM
Accesses On-Screen
Display.
Enter to program edit mode.
RETURN
(O)
displays
Removes the
ZOOM
setup menu,
the video CD with PBC.
Enlarges
video
image.
REPEAT
Repeat chapter, track, title,
all.
A-B
Repeat sequence
point B.
from
point
A to
RANDOM
Plays
tracks in random order.
KARAOKE
Accesses
Remote Control
Remote Control
Operation
Point the remote control at the remote
sensor
and
AAA AAA
Do not mix old and
types
the
rear
menu.
of the
control, and insert two batteries
(size AAA) with 3 and # aligned correctly.
remote
Caution:
different
KARAOKE
Battery installation
battery cover on
Detach the
press the buttons.
(ECHO)
or removes
new
batteries and
of batteries such
as
never
mix
standard, alkaline,
etc.
7
Installation and
Setting up
The
the
Setup
Video and Audio Connections
Player
nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
picture
DVD
and sound of
a
to Your TV
Make
the DVD
sure
TV and not to
player
is connected
to the
directly
VCR, otherwise the DVD image could
be distorted by the copy protection system.
Video
Player Connections
DVD
--
a
Connect the VIDEO OUT
player
to the video in
the video cable
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
S-Video
DVD
--
jack
jack
on
the
using
(V)
Connect the S-VIDEO OUT
Player
on
the TV
to the S-Video in
the S-Video cable
jack
on
jack
on
the TV
the
using
(S).
information.
Component
Video
--
Connect the COMPONENT
VIDEO OUT/PROGRESSIVE SCAN
DVD
the
TV
Pb
Player to
using an Y
Progressive
corresponding
Pr cable (C).
in
jacks on the
jacks on the
Scan
?
If your television is a high-definition or "digital
ready" television, you may take advantage of
the DVD Player's progressive scan output for
the highest video resolution possible.
?
If your TV does not accept the Progressive
Scan format, the picture will appear scrambled
if you
try Progressive Scan
on
the DVD
Player.
Notes:
?
?
Set the
Progressive to "On" on the setup
progressive signal, see page 11.
menu
Set the
any disc
progressive
to "Off"
by removeing
from the unit and close the disc
"no disc" is
displayed
on
the
for
tray. Confirm that
display
window. Then
press STOP and hold it for five seconds before
releasing it.
?
Progressive
scan
video connection
Caution:
Output
Select
option
to
use
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
and S-Video
jacks. (Refer
to page
11.)
system.
8
(yellow
VIDEO OUT
composite
jack).
Audio
Connect the left and right AUDIO OUT
jacks of the DVD Player to the audio left and right
IN jacks on the TV (A) using the audio cables.
Do not connect the DVD Player's AUDIO OUT jack
to the phone in jack (record deck) of your audio
--
You must set the TV
does not work with the
Audio Connection to
Optional
Equipment
Connect the DVD
for audio
player
to your
optional equipment
output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
player
Digital Multi-channel
digital multi-channel
sound quality. For this
A
/ video receiver that
X
sound
connection
provides
you need
multi-channel audio
supports
a
one or more
the best
of the
audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
A
Notes:
?
COAXIAL
DIGITAL INPUT
If the audio format of the
the
AUDIO INPUT
a
Amplifier (Receiver)
?
strong,
Laboratories.
the double-D
Dolby
"Dolby", "Pro
symbol are trademarks
produces
Digital Surround Sound via a digital
only be obtained if your receiver
with
a
equipped
Digital Multi-channel decoder.
can
is
of
Laboratories.
DTS and DTS
of
Dolby
Logic", and
does not match
Six Channel
connection
Manufactured under license from
digital output
of your receiver, the receiver
distorted sound or no sound at all.
capabilities
Digital
Digital Out are trademarks
Systems, Inc.
Theater
9
Disc Information
Displaying
LANGUAGE
on-screen
LANGUAGE
Menu
Some items
can
be
Press DISPLAY
1.
The selected item is
Press v / V to
3.
You
can
also
02/04
Language
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
an
change
use
item.
highlighted.
the
setting.
Press ENTER.
Move
Select
Exit
the number buttons if
the title
appropriate (e.g. inputting
02/04
menu.
during playback.
Press b / B to select
2.
the
changed using
:
Title(Track) Number,
:
Chapter
Number
0:08:20
(DVD
disc
number).
:
Time search
only)
Menu
Language
Select
a
language
for the
Setup
menu
and
on-screen
display.
Disc Audio / Subtitle / Menu
Note:
If
Select the
button is
no
screen
pressed for a
display disappears.
few
seconds, the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
on-
Original
the disc
Initial
Settings
display
the
A second press of
menu.
SETUP will take you back to initial
--
To select another
buttons then ENTER to enter the
press CLEAR.
DISPLAY
screen.
To go to the next level:
Press B on the remote control.
DISPLAY
TV
4:3
Aspect
Display
TV
Letterbox
Mode
Progressive
To go back to the previous level:
Press b on the remote control.
Output
Scan
Off
Select
YPbPr
Operation
Move
1.
Press SETUP. The
2.
Use b / B to select the desired
V
or
ENTER to
screen
item,
3.
5.
Setup
move
well
as
menu
alternate
TV
option
setting for
setting(s).
the selected
Use v / V to select the second desired
move
option
then
to the third level.
Use v / V to select the desired
Press
SETUP, RETURN
or
setting
PLAY to exit the
4:3
Setup
Select when
--
16:9
Display
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
Mode
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays a wide picture with bands
portions of the screen.
on
the upper and lower
Panscan
on
--
Automatically displays
the entire
do not fit.
10
Exit
Aspect
Display
then press
ENTER to confirm your selection. Some items
require additional steps.
menu.
Select
appears.
then press
to the second level. The
shows the current
as
press B to
4.
in which
and exit the Menu:
display
Press SETUP to
General
original language
recorded.
language, press number
corresponding 4digit number according to the language code list
on page 20. If you enter the wrong language code,
Other
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 10 to 13.
To
Refers to the
--
was
track
screen
the wide
and cuts off the
picture
portions that
Progressive
Scan
AUDIO
Progressive Scan Video provides the highest quality
pictures with less flickering. If you are using the
Component Video jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to On. Press ENTER to
confirm your selection. The confirm
menu
Each DVD disc has
Set the
of audio
system you
will appear.
variety of audio output options.
options according to the type
use.
AUDIO
Bitstream
Dolby Digital
DTS
Caution:
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
If you set
a
AUDIO
player's
Progressive
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
Off
Scan to On in error, you must
reset the unit.
Move
Press B. Select "Off"
1)
The
Setup
menu
using
the v / V buttons.
Dolby Digital
appears.
Bitstream
Press STOP and hold it for five seconds before
2)
it. The video
releasing
standard
visible
and
setting
on a
output will be restored
will
picture
conventional analog
a
once
TV
or
again
to the
Set the
player's
YPbPr
--
Select "Bitstream" if you connect this
jack to an amplifier or other
with
Output
Select
a
Dolby Digital,
DTS
or
InstaliodSeup
MPEG
decoder.
monitor.
options according
a
automatically
type.
/
--
two-channel
DVDs encoded in
to
MPEG) Select when
digital stereo amplifier.
Dolby Digital or MPEG will be
(for Dolby Digital
connected to
TV
the TV connection
/ DTS / MPEG
equipment
be
Select
Output
Exit
unit's DIGITAL OUT
PCM
TV
Select
downmixed to two-channel PCM
audio.
When your TV is connected with the
COMPONENT VIDEO OUT/PROGRESSIVE
Off
SCAN
not
--
jacks
S-Video
S-Video
--
on
the DVD
player.
When your TV is connected with the
jack.
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
is
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of
96 kHz signals, select 48 kHz. When this
handling
choice is
96 kHz
made, this unit automatically converts any
signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is
kHz signals, select 96 kHz.
capable
Check the documentation for your
its capabilities.
Dynamic Range
Control
of
handling
amplifier
to
96
verify
(DRC)
With the DVD
format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible. However, you may wish to
compress the dynamic range of the audio output
difference between the loudest sounds and the
quietest ones).
a
(the
This allows you to listen to a movie at
losing clarity of sound. Set
lower volume without
DRC to On for this effect.
11
LOCK (Parental
buttons then press ENTER. Enter the 4-digit
password again to verify when the "Confirm
Control)
Password" section is
will be
LOCK
Rating
Unlock
Password
NEW
Area code
MY
To
highlighted,
then. The "OK"
highlighted.
the
change
password:
When the "Old Password" section is
enter the
highlighted,
you have created then
press ENTER. The"New Password" section will be
highlighted. Enter a new 4-digit password using the
Move
Select
numbered buttons then press ENTER. Enter the
new 4-digit security password again to verify when
Exit
the "Confirm Password" section is
Rating
Blocks
of rated DVDs based
playback
content. Not all discs
1. Select
2. Select
Rating
on
on
"OK" will be
their
the LOCK
menu
then press B.
using the v / V buttons
password window will
1-8:
Rating one (1) has the most
rating eight (8) is the least
3. If you have not entered password yet:
When the "New Password" section is highlighted,
"Confirm Password" section is
highlighted.
6-digit number "210499".See that
displayed on the display window.
3.
a new
password
as
area
"P-CLr" is
described above.
whose standards
used to rate the DVD video
using
highlighted.
selection, then
1.
disc,
based
on
were
the list in
chapter.
Select "Area Code"
on
the LOCK
menu
then press
B.
2.
Select the first character
3.
Shift the
using
v / V buttons.
B button and select the
using
using v / V buttons then
password window will appear
cursor
second character
Tips:
ENTER, the
If you make a mistake before pressing ENTER in
each section, press CLEAR to enter again or b
to delete
password
numbers
one
by
one
then correct it.
If you enter the wrong password, you
proceed to the next step.
not
can
or
"Change"
change password.
is
on
the LOCK
menu
then press B.
highlighted
2. Press ENTER then the
5.
If you have not entered password yet:
When the "New Password" section is highlighted,
a
4-digit password using
3. To make
a new
password
window will
highlighted.
The
highlighted.
If you have entered password already:
Enter a 4-digit password you have entered
using
highlighted.
6. Press ENTER to confirm your Area Code
then press SETUP to exit the menu.
password:
When the "New Password" section is
4-digit password using
the numbered
buttons then press ENTER. Enter the 4-digit
security password again to verify when the
the numbered buttons. The "OK" will be
appear.
a
ENTER, the password window will appear.
"OK" will be
1. Select Password
enter
Press
"Confirm Password" section is
create
press
4.
enter
can
Password
12
Enter
the reference
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
The
setup menu apears on the TV
Use the numbered buttons to enter the
Enter the code of the
The
highlighted.
the numbered buttons. The "OK" will be
You
Press SETUP and
Area Code
If you have entered password already:
Enter a 4-digit password you have entered
repeatedly
using
the numbered
4-digit password using
buttons then press ENTER. Enter the 4-digit
security password again to verify when the
?
clear it
Remove any disc from the unit and close the disc
on the display
screen.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
"OK" will be
can
window.
2.
restrictive.
a
Code
forget your Security
tray. See that "nodISC" is displayed
restrictions and
enter
The
menu.
If you forget your security code you
the following steps:
1.
appear.
Rating
If you
highlighted.
highlighted.
4. Press SETUP to exit the
rated.
from 1 to 8
rating
a
are
and press ENTER. The
?
4-digit password
highlighted,
the numbered
selection,
OTHERS
OTHERS
PBC
On
Auto
On
Play
B.L.E.
Off
Move
Select
Exit
PBC
Set
Playback
Control
(PBC)
to On
On: Video CDs with PBC
or
Off.
are
played according
are
played
to
the PBC.
Off: Video CDs with PBC
way
Auto
You
as
the
same
Audio CDs.
InstaliodSeup
Play
can
set up the DVD player so a DVD disc
starts playing whenever the DVD is
automatically
inserted.
If Auto
Play
mode is set to
On, this DVD player will
search for title that has the
then
play
back the title
longest playback
automatically.
time and
Note:
The Auto
B.L.E.
Play
(Black
function may not work for
Level
some
Expansion)
To select the black level of
preference
On:
and monitor's
Expanded
DVDs.
playback pictures.
ability.
grey scale.
Off: Standard grey scale.
(0
(7.5
IRE cut
Set your
off)
IRE cut
off)
Note:
The B.L.E. function works NTSC
system only.
13
Operations
General features
Buttons
Operations
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
/
>)
tray.
press X to pause
During playback,
Press X
SKIP
Discs
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
>) to go to the
beginning of the
or
return to the
to
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m
required scan speed.
or
M) repeatedly
to
select the
DVD
disc; 4 steps
CD, MP3, WMA, Audio CD
Video
; 3
steps
While the
playback is paused, press SCAN M
repeatedly to play in slow motion (4 steps, forward only).
REPEAT
press REPEAT
During playback,
desired
DVD Video discs:
Video
A-B
repeatedly
to select
a
repeat mode.
Chapter/Title/Off
CD, Audio CD, MP3/WMA discs: Track/All/Off
or
Normal
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (4 steps).
You can move through the zoomed picture using bBvV
the video
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback or
random playback.
in
stop mode, press RANDOM for
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(ANGLE)
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback
of DVD disc contains
different
camera
select
desired
angles,
angle.
a
press ANGLE
scenes
recorded
repeatedly
During playback, press SUBTITLE repeatedly
language.
to
to select
desired subtitle
(AUDIO)
During playback, press AUDIO repeatedly
language or audio track.
different audio
14
to hear
a
a
Notes
?
On
on
Video CD with
the
"PBC"
?
general features:
on
a
setup
on
menu
page
PBC, you
to
use
the
Last Scene
must set PBC to Off
repeat function (See
even
(>)
(Track) playback,
the
once
during Repeat Chapter
Zoom may not work
?
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
the TV
at different
on some
screen
angles as
possible.
an
DVDs.
during
if you
off the
remove
player.
recorded
scenes
indication that
This
If you load
scene is
player
player
before
in
Stop
at any chosen time
on
the disc:
Press DISPLAY
2.
Press b / B to select the time clock icon and
System
during playback.
of
a
disc if
to
play
for five
Select
TV
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold PAUSE/STEP for
start time in
minutes, the DVD
itself off.
You must select the
"-:--:--" appears.
required
scene
commencing
appears when you leave the DVD
mode for about five minutes. If the
displayed
Player automatically turns
1.
Input
scene
recalled.
screen saver
player
Screen Saver is
the
disc that has the
Screen Saver
Time Search
3.
a
automatically
does not memorize the
you switch off the
the disc.
The
playing
from the last disc
remains in memory
the disc from the player or switch
angle
Additional features
To start
scene
scene
Note:
is
switching
memorizes last
memorized, the
repeat playback cancels.
?
on
player
that is viewed. The last
13).
If you press SKIP
will blink
This
Memory
hours, minutes,
and
to be able to select
a
more
than 5 seconds
system (PAL, NTSC,
or
AUTO).
seconds from left to
right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
Press ENTER to confirm.
4.
Playback
starts from the
selected time.
Marker Search
To enter
You
Marker
start
can
points.
a
from up to nine memorized
at the
playback
To enter
desired
point
the TV
screen
a
on
marker, press MARKER
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
markers.
To Recall
or
1.
During
disc
search
menu
2.
3.
Clear
Marked Scene
a
playback,
appears
press SEARCH. The marker
on the screen.
Within 10
seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
scene.
playback
a
marker
starts from the marked
Or, Press CLEAR and the marker number is
erased from the list.
4.
You
can play any marker
the marker search menu.
by inputting
its number
on
15
Playing
an
Audio CD
MP3 / WMA disc
or
limited
MP3/WMA file
?
Once you insert an audio CD a menu
appears on the TV screen. Press v / V to select a
track then press PLAY or ENTER to playback starts.
--
001 / 022
CD
00:00
Normal
/00:00
?
?
?
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
DISPLAY
Program
List
PROGRAM
Add
-
which creates
File
?
They
ENTER to
2.
a
folder, and press PLAY
or
the folder contents.
see
Press v / V to select
ENTER.
names
and must
Press v / V to select
Playback
a
an
ISO 9660 file
should have
incorporate
an
should not contain
a
system.
maximum of 8 letters
.mp3 or .wma extension.
special letters such as / ?
*:"<>letc.
track then press PLAY
or
?
starts.
The total number of files
on
the disc should be less
than 648.
?
003 / 036
00:00
-
-
?
MP3 / WMA
1.
is
player
-
?
TRACK 01
with this
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files.
We recommend that you use Easy-CD Creator,
within 32
Audio CD
compatibility
follows:
as
This DVD
Normal
/00:00
player requires
discs and
recordings
to
meet certain technical standards in order to
achieve
Music 01
Music 02
Music 03
Music 04
Music 05
are
in
a
Program
List
file list
on
the MUSIC
to return to the Folder
and press PLAY
?
?
PROGRAM
list,
or
use
Add
move
Press TITLE to
to the
a
move
and want
menu
the v / V to
highlight
ENTER.
Press DVD MENU to
On
to the next page.
previous
many different types of recordable disc
can
a
the folder contents.
Customers should note that
required
should
page.
CD with MP3/WMA and JPEG you
Press v / V to select
16
are
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
owner.
switch
MP3/WMA and JPEG.
see
There
(including CD-R containing MP3 or WMA
files) and these require certain pre-existing
conditions (see above) to ensure compatible
playback.
Tips:
If you
are
formats
DISPLAY
?
optimal playback quality. Pre-recorded
automatically set to these standards.
DVDs
folder, and press ENTER
to
always
be
sought
from the
copyright
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program
contain 30 tracks
can
(Audio CD,
MP3/WMA).
1.
Insert
2.
Press v / V to select the desired file.
3.
disc.
a
(Audio CD,
Press PROGRAM
MP3
WMA.)
or
during playback
or
in the
stop
mode.
press PROGRAM to
the program list.
Repeat
tracks
4.
place
additional
on
Press DISPLAY.
Program List menu appear.
Press v / V to select the track you want to start
playing.
Press DVD MENU to
move
Press TITLE to
to the
move
001 / 022
CD
00:00
Normal
Program
/00:00
to the next page.
previous
page.
003 / 036
List
00:00
/00:00
Program
List
Normal
Music 01
TRACK 01
Music 02
TRACK 02
Music 03
TRACK 03
TRACK 04
Music 04
TRACK 05
Music 05
Music 06
TRACK 06
DISPLAY
Return
CLEAR
Delete
DISPLAY
Audio CD Menu
5.
Press PLAY
6.
To
resume
or
Return
CLEAR
Delete
MP3/WMA Menu
ENTER to start.
normal
playback
from
programmed
playback.
Press DISPLAY then select
press PLAY
Erasing
1.
a
or
a
track of list and then
ENTER.
Operation
Track from program list
Use v / V to select the track that you wish to
from the program list.
erase
2.
Press CLEAR.
on
Repeat
to
erase
additional tracks
the list.
For details
on
each
operation item,
refer to
relevant page.
17
Viewing
Using
this DVD
Still Picture
JPEG file
a
Player
view discs with JPEG
can
you
1.
1.
Insert
a
disc and close the
The PHOTO
menu
Press PAUSE/STEP
The
files.
2.
tray.
on
appears
the TV
screen.
player
will
during
slide show.
go into PAUSE mode.
now
To return to the slide
show, press PLAY, ENTER
press PAUSE/STEP
again.
or
Zoom
001 / 052
00:00
Use
Normal
/00:00
1.
File 01
to
zoom
enlarge
Press ZOOM
the video
image.
during playback
to activate the Zoom
function.
File 02
File 03
2.
File 04
File 05
Each press of the ZOOM button
in the sequence:
the
changes
screen
Program
DISPLAY
List
PROGRAM Add
100%
2.
Press v / V to select
a folder, and press ENTER
PLAY. A list of files in the folder appears.
If you are in a file list and want to return to the
Folder
remote to
list,
the v / V buttons
on
and press ENTER
or
use
highlight
→
200%
→
Use the bBvVbuttons to
3
zoomed
or
previous
150%
→
4.
the
To
100%
move
through
the
picture.
resume
normal
press ZOOM
playback, press CLEAR or
repeatedly to select the 100%.
PLAY.
3.
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. Viewing
the file proceeding starts.
While viewing a picture, you can press STOP to
move to the previous menu (PHOTO menu).
JPEG disc
limited
?
compatibility
with this
player
is
follows:
as
Depending
upon the size and number of JPEG
a long time for the DVD player
files, it could take
to read the disc's contents. If you don't
display
screen
Tips:
after several
minutes,
see an on-
some
of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
---
?
?
Press DVD MENU to
move
Press TITLE to
to the
On
move
to the next page.
previous
page.
CD with MP3/WMA and JPEG you
MP3/WMA and JPEG.
a
Press v / V to select
see
a
can
2048
switch
folder, and press ENTER
to
?
picture
(.
or
>)
once
to advance to the next
while
or
viewing a
previous file.
picture
Press b / B
picture
18
clockwise
If the files have
File
them
or
a
picture
to rotate the
counter clockwise.
the disc
names
the files
are
Windows
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
during showing
on
Ensure that all the selected files have the
rename
?
To rotate
and burn another disc.
extensions when
to another File
Press SKIP
pixels
The total number of files and folders
should be less than 648.
?
the folder contents.
Moving
?
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
Using
the Karaoke Function
VOICE: If you wish to sing a duet with the
recorded karaoke singer, select a voice you
karaoke disc.
desire.
1.
Load
2.
Set the MIC VOL control to the minimum level to
a
prevent acoustic feedback (e.g.
sound)
before
Connect
3.
a
connecting
microphone
Voice Select
loud
howling
microphone.
the
a
a
microphone
is not
connected, the karaoke
Voice1
Voice1
V2
Voice2
Voice2
V1+V2
Voice1
Voice2
Off
None voice
None voice
menu
will not appear.
EFFECT: You
1 / 2 is
4.
Press PLAY to start
5.
Adjust
playback.
sing a song.
option follow steps
Off
6-
7.
→
can
→
CHORUS
change
the
key by pressing
the
1 / 2 buttons.
Press KARAOKE
during playback.
KARAOKE
Note:
appears.
Controlling the key
amplifier (receiver)
menu
Use 3/4 to select
an
desired item
MELODY, VOICE, EFFECT
The
the
FLANGE
KEY: You
8.
6.
Special Effects. Each time
Special Effect changes as
can use
pressed,
shown below.
MIC VOL control and then
If you want to set KARAOKE
Output
speaker
Right speaker
V1
to MIC socket.
Note:
If
Left
display changes
as
or
(ECHO,
KEY).
shown in the chart below.
when DVD
player
with
audio
digital
is connected to
connection, may
mute the sound of the front
left/right speakers
amplifier (receiver).
In that case, you must change the sound mode of the
amplifier (receiver) for the output of the speakers.
cause
connected with
9.
Press KARAOKE to exit the KARAOKE
menu.
Note:
?
The
?
The karaoke feature functions
microphone may
playback. (ex. slow)
compatible
?
?
not be available
with karaoke-
discs.
The VOICE and MELODY
available
on some
For
details, refer
more
only
during special
menus
Operation
may not be
karaoke discs.
to the information
supplied
with the disc.
?
8.
Use 1/2 to
adjust
value of the item
ECHO: You
can
adjust
the echo volume
no
microphone's
disc encoded with DTS is
selected.
pressing
There is
sound
output during
playing
a
back.
by
the 1/2 buttons.
MELODY: If you wish to sing only to the backing
or orchestra unaccompanied by a vocal
band
guide melody,
set MELODY to Off.
19
Reference
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a
Area code from this list.
Area
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Herd and Mcdonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
20
Code
Afghanistan
Argentina
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD player does
?
No disc is inserted.
?
the power cord into the wall outlet
Plug
securely.
Insert
a
in the
display
disc.
(Check
the disc indicator
window is
lit.)
not work.
No
picture.
?
The TV is not set to receive DVD
?
?
Select the
mode
signal output.
The video cable is not connected
on
appropriate
video
input
the TV.
?
Connect the video cable
?
Select the correct
securely.
securely.
No sound.
?
The
connected with the
equipment
audio cable is not set to receive DVD
audio receiver
signal output.
?
?
The power of the equipment connected
with the audio cable is turned off.
?
The AUDIO
?
options
position.
wrong
?
The DVD
not start
player does
playback.
unplayable
Turn
the
on
connected with
equipment
the audio cable.
set to the
disc is inserted.
?
Set the AUDIO
option to the correct
position, then turn on the DVD player
again by pressing POWER.
Insert
playable
a
disc.
(Check
the disc
type and regional code.)
?
The
?
The remote control is not
The remote control
does not work
An
are
mode of the
input
you can listen to the
sound from the DVD player.
so
rating
level is set.
the remote
properly.
?
sensor on
?
pointed at
player.
?
the DVD
?
rating
of the DVD
Operate
the DVD
player.
the
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
Change
player.
the remote control closer to
player.
Specifications
DIGITAL OUT (COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
General
Power
Power
requirements:
AC 200-240 V
consumption:
8 W
Dimensions
(14.2
x
1.4
x
360
(Approx.):
inches) (W
9.5
Weight (Approx.):
1.7
,
50/60 Hz
System
35
x
x
H
x
x
242
D)
Laser:
mm
Semiconductor
without foot
5 % to 90 %
CD:8Hzto20kHz
More than 100 dB
VIDEO OUT:
(p-p),
ratio:
Signal-to-noise
75 Ω, sync
negative,
RCA jack
x
(ANALOG
OUT connectors
only)
.
Harmonic distortion: Less than 0.02%
1
Dynamic range:
S-VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative
(C)0.3V(p-p)75Ω
nm
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
Outputs
1 V
650
NTSC / PAL
Signal system:
kg (3.7 lbs)
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
laser, wavelength
sync, Mini DIN
4-pin
x
1
More than 95 dB
(DVD/CD)
Accessories:
COMPONENT VIDEO OUT:
Video cable
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
1
Batteries
(1),
Audio cable
(1),
Remote control
(1),
(2)
AUDIO OUT:
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
Note: Design and specifications
are
subject
to
change prior
notice.
21
P/NO.
:
MFL31138318
Download PDF

advertising