LG | DK6812P | LG DK6812P Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
:
DK6812P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
WARNING
NOTES ON COPYRIGHTS:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed by
Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
a
risk of electric
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION:
This
To
Digital
ensure
manual
Video Disc
proper
carefully
use
Player employs
of this
Laser
product, please
System.
read this owner's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
other than those
a
specified
authorized service location
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
2
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
on
this unit. This number is
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
Operation withAudioCDandMP3Discs.
PlayinganAudioCDandMP3Discs.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.18
Pause.............................18
MovingtoanotherTrack................18
RepeatTrack/All/Off..................18
Search.............................18
Random...........................18
RepeatA-B.........................18
3DSurround........................18
.
RemoteControl............................7
RearPanel................................8
.18
ChangingtheAudioChannel.
ProgrammedPlayback.....................19
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Discs.........................19
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
ProgrammedPlaybackwithVideoCD
RepeatProgrammedTracks.
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.19
.19
AdditionalInformation...................20-22
LastConditionMemory...................20
ScreenSaver...........................20
VideoModeSetting......................20
ControllingtheTV.......................20
UsingtheKaraokeFunction................21
NotesonMP3Discs.....................22
Sound.............................13
Others.............................13
ParentalControl......................14
Operation
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
.
Reference
Troubleshooting..........................23
LanguageCodeList.......................24
CountryCodeList.........................25
Specifications............................26
GeneralFeatures........................15
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
.
.
.
.
SlowMotion.........................15
Still Picture and
Frame-by-Frame Playback
About the
symbols
for instructions
.
.
16
Indicates hazards
itself
or
likely to cause
damage.
harm to the unit
other material
Search.............................16
Random...........................16
Indicates
special operating
Repeat............................16
RepeatA-B.........................16
Indicates
tips
and hints for
features of this unit.
making
the task easier.
TimeSearch........................16
3DSurround........................16
Zoom..............................17
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitle............................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In
addition, this unit
can
play
or
a
SVCD, CD-R
accompanying
or
feature content
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
that contains audio titles
(DVD only)
DVD
or
CD-RW
MP3 files.
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Notes
--
Depending
ment
on
the conditions of the
the CD-R/RW disc
or
discs cannot be
--
The unit cannot
played on
play discs
itself,
recording equip-
some
CD-R/RW
Track
that contain
data, other
a
CD and audio CD
picture
or a
enabling
only)
piece on a video CD
assigned a track number,
musical
audio CD. Each track is
or an
the unit.
(Video
Sections of
you to locate the track you want.
than MP3 and CD-DA data.
--
--
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
or
irregularly shaped
octagonal). It may result in
use
Notes
on
CDs
(the
(e.g., heart-shaped
malfunctions.
DVDs and Video CDs
playback operations of DVDs and Video CDs may
intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some play-
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Some
be
Types
There
of video CDs
are
two
types of video CDs:
back features of the unit may not be available or other
functions may be added.
Refer also to the instructions supplied with the DVDs
Video CDs
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
typical computer-like operations. Moreover,
of high resolution can be played if they are
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system via
menus, search
functions,
or
still
other
pictures
included in
the disc.
Regional
code of the DVD
This DVD
is
player
and DVDs
and manufactured
player designed
3
for playback of region "3" encoded DVD software.
The region code on the labels of some DVD
discs indicates which type of player can play those discs.
This unit can play only DVD discs labeled "3" or "ALL". If
you try to play any other discs, the message "Check
Regional Code" will appear on the TV screen. Some DVD
discs may not have a region code label even though their
playback is prohibited by area limits.
Note
To avoid
on
DTS-encoded CDs
possible damage to the audio system, turn
down the volume before playing back such discs, adjust
the volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
4
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
such
as
the unit. Do not leave rubber
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
insecticide spray,
or
To clean the cabinet
a
discs
the unit
Cleaning
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
use
thinner,
or
are
moistened with
lightly
strong
as
a
extremely dirty,
mild detergent
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
on
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
get
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Display Window
Standby indicator
Lights red when the player
in Standby mode (off).
Forward SKIP/SCAN
is
Go to NEXT
Press and hold for two seconds for
POWER
Switches the
player
Opens
ON and OFF.
beginning
of current
chapter/track
fast forward search.
/
OPEN/CLOSE
(
closes the disc
tray.
or
Reverse SKIP/SCAN
Go to
a
( T /R)
chapter/track.
or
(
Q / S
)
)
to PREVIOUS
chapter/track.
Press and hold for two seconds for
fast
a
Microphone jacks (MIC1, MIC2)
a microphone to MIC1 or
or
to both sockets.
Pause
PAUSE(;)
playback temporarily / press repeatedly
for frame-by-frame playback.
Microphone volume controls
Adjusts microphone volume.
Disc
Insert
a
Point the DVD
Display
DVD
remote control here.
player.
TITLE
is connected
Player
window
Shows the current status of the
Microphone
PLAY(2)
playback.
Starts
Remote Sensor
Tray
disc here.
ANGLE active
search.
STOP(9)
Stops playback.
Connect
MIC2
reverse
Indicates current title number
CHP/TRK
Indicates current
chapter
or
track number
DVD inserted
Indicates total
CD Audio CD inserted
playing time/elapsed
time
VCD Video CD inserted
MP3
PROG.
MP3 disc inserted
Programmed playback
RANDOM
Indicates current
player
active
RANDOM
playback
active
function:
Playback, Pause,
etc.
Indicates
mode
MP3 VCD
6
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
AB
repeat
Remote Control
DVD/TV select button
Selects
OPEN/CLOSE
mode of remote
operational
Player
-
ON and OFF.
POWER
OPEN/CLOSE
-
display
DVD
2
-
4
3
(left/right/up/down)
Selects
-
an
item in the
DISPLAY
RETURN
changes
menu on a
TV AV
SELECT
volume of TV.
ENTER
VOL
Removes the
the
Displays
setup
INTRODUC
menu.
of
menu
video CD
a
-
Selects AUX A/V
channel.
input
VOL
MENU
SELECT/ENTER
TITLE
Acknowledges
PR./CH
DVD disc.
Turns off TV sound.
with PBC.
PR./CH
MENU
Accesses
-
menu
Selects channel of TV and
during
playback.
RETURN/TV AV
TV SOUND/MUTE
-
1
Selects 3D SURROUND
disc
DISPLAY
Accesses On-Screen
tray.
SOUND/MUTE
POWER
Switches DVD
and closes the disc
Opens
control.
SLOW PAUSE/STEP STOP
selection.
menu
SLOW
TITLE
ReverseSLOW(,)?
Reverse slow playback.
SKIP/SCAN
PLAY
available.
PAUSE/STEP ( ; )
playback temporarily/ press
repeatedly for frame-by-frame
playback.
?
PROGRAM
?
Pauses
?
REPEAT
A-B
MARKER SEARCH
RANDOM ZOOM
Selects
audio
an
KARAOKE
Selects
a
subtitle
a
DVD
camera
angle
Accesses
setup
or removes
Marks any
MARKER SEARCH
Accesses
or removes
Removes
if
?
?
?
remote
a
track number
on
the
?
sequence.
RANDOM
tracks in random order.
ZOOM
Enlarges
?
all.
A-B
Plays
?
video
image.
KARAOKR
Remote control
sensor
AAA AAA
(7 m)
from the front of the
sensor.
About 30° in each direction of the front of the
battery
installation
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
and press
the buttons.
Angle:
menu.
program
REPEAT
Repeat
?
Point the remote control at the remote
remote
or removes
Repeat chapter, track, title,
?
Operation Range
Distance: About 23 ft
track.
program menu or a mark on the
MARKER SEARCH menu.
?
menu.
Remote Control
or
CLEAR
menu.
KARAOKE
)
?
point during playback.
SEARCH
Displays
S
PROGRAM
menu.
MARKER
(
Press and hold button for about
Accesses
available
SETUP
)
chapter
two seconds.
?
language.
ANGLE
Selects
*
language (DVD) or
(CD).
SUBTITLE
Reverse SKIP/SCAN
previous chapter
a menu.
audio channel
an
T
Search backward*/ go to beginning
of current chapter or track or go to
0-9 number buttons
AUDIO
(
?PLAY(2)
Starts playback.
AUDIO SUBTITLE ANGLE SETUP
ForwardSLOW(.)?
Forward slow playback.
Forward SKIP/SCAN
Search forward*/ go to next
or track.
CLEAR
STOP(9)?
Stops playback.
Selects numbered items in
the discs Title menu, if
Displays
SKIP/SCAN
with
the
rear
of
two R03
and
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
sensor.
7
Rear Panel
VIDEO OUTPUT Switch
Select either S-VIDEO OUT
VIDEO
OUT, depending
on
or
COAXIAL
COMPONENT
(Digital audio out jack)
digital (coaxial) audio equipment.
Connect to
how you connected the
DVD Player to the TV.
AUDIO OUT
Connect to
(Left/Right)
amplifier, receiver,
an
or
stereo
system.
VIDEO OUT
Connect to
*System
a
TV with video
inputs.
Select switch
S-VIDEO OUT
Connect to
a
TV with S-Video
inputs.
AC Power Cord
Plug
COMPONENT VIDEO OUT
Connect to
*
System
You
TV with Y Pb Pr
NTSC
or
PAL discs
by using System
appropriate system.
player is connected with
Select switch to choose the
PAL:
Select when DVD
NTSC:
Select when DVD
PAL-TV.
player
is connected with
player
is connected with
NTSC-TV.
AUTO:
Select when DVD
Multi
?
system
When the selected
coincide with the
picture
?
Set
off.
8
source.
Pb
Pr)
inputs.
Select switch
enjoy
can
a
(Y
into the power
System
system
may not be
System
TV.
Select switch does not
of your
TV, normal color
displayed.
Select switch when the power is turned
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Connections
Tips
Depending
Rear of TV
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
on
COMPONENT VIDEO
Pr
Pb
S-VIDEO
INPUT
Y
AUDIO INPUT
R
VIDEO
INPUT
L
described below.
PREATION
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
For better sound
reproduction, connect
jacks to the audio in jacks
AUDIO OUT
the
player's
of your
audio/video equipment.
amplifier, receiver, stereo or
See "Connecting to optional equipment"
C
S
AV
page 10.
on
Caution
--
Make
directly to the
input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
the DVD
Player
is connected
TV. Tune the TV to the correct video
--
--
system.
Connecting
Make
one
of the
to a TV
following connections, depending
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT
on
the
Rear of
DVD
jacks,
player
set the VIDEO OUTPUT switch to COMPONENT.
When
using
the S-VIDEO OUT
jack,
set the VIDEO
OUTPUT switch to S-VIDEO.
Video connection
1
2
Connect the VIDEO OUT
the video in
jack
supplied (V).
on
jack on
using
the TV
the DVD
Player
to
the video cable
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the supplied audio cables.
the DVD
TV
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
S-Video cable
2
jack
(S).
on
jack
the TV
on
Player
optional
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the supplied audio cables.
Component Video (Color Stream )
connection
Connect the COMPONENT VIDEO OUT
jacks on
Player to the corresponding in jacks on the
using an optional Y Pb Pr cable (C).
the DVD
TV
2
an
the DVD
TV
1
the DVD
using
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the supplied audio cables.
the DVD
TV
9
Connections
Connecting
(Continued)
Optional Equipment
to
Connecting to an amplifier equipped with
analog stereo or Dolby Surround
Rear of DVD
player
two
channel
Connect the Left and
DVD
Player to the
amplifier, receiver,
audio cables (A).
Right
AUDIO OUT
jacks on the
right in jacks on your
system, using the supplied
audio left and
or
stereo
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
1
X
one of the DVD Player's DIGITAL AUDIO
jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital
(coaxial X) audio cable.
Connect
OUT
COAXIAL
DIGITAL INPUT
You will need to activate the
2 (See "Digital
Digital
Audio
Output"
player's digital output.
page 13).
on
Multi-channel sound
A
digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that
supports
one or more
of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes
--
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--
A
To
see
screen
10
the audio format of the current DVD in the
display,
press AUDIO.
on-
Amplifier (Receiver)
R
L
AUDIO INPUT
Before
Operation
Before
the remote
using
control, press the DVD
button to select the device to be
General
or
TV
gives
DVD
Some DVDs
operated.
General
screen.
playback
Temporary
the
of
setting
an
item.
be also be used for
number).
For
some
setting
functions,
setting.
Title
Repeat
Track
(non-PBC
Repeat
All Tracks
AB
Repeat
A-B
OFF
Repeat
Off
ALL
Resume
displayed on the TV
changed on the menu.
be
title
can
Feedback Field Icons
be
can
change
Repeat Chapter
CHAPT
TRACK
Action
display operation
Press DISPLAY
1
can
(e.g.,
Repeat
TITLE
Display
Some items
On-screen
2
basic instructions for
status
to
press SELECT/ENTER to execute the
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen
or 2
The number buttons
numbers
Explanation
This manual
Press 1
3
Caution:
play
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press
3 or 4
to select
an
The selected item will be
item.
highlighted.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
titles,
1/12
Time search
language
Digital Audio
Output mode
1
ENG
and
Subtitle
language
Angle
D
6CH
OFF
1/1
Sound
Shows the current
chapters,
and
chapter
skips
searches
1/2,or
Numbers, SELECT/ENTER
number and total number of
to the desired
chapter
number.
elapsed playing time, and
the point by the elapsed time directly.
1/2,or
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
and
changes
the
1/2
setting.
Shows the current
angles,
and
angle number and total
changes the angle number.
mode,
1/2
number of
and
setting.
1/2
1/2
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
Sound
to the desired title number.
Shows the current sound
NORM.
VCD2.0
skips
Shows the
0:16:57
Audio
and
Selection Method
0:16:57
STER.
NORM.
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track
1/2,or
Numeric, SELECT/ENTER
and PBC On
Shows the
mode,
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
changes
and
channel,
(Display only)
and
the
setting.
mode,
--
1/2
the audio channel.
Shows the current sound
changes
time
and
1/2
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Menu
Settings
Select
Personal Preferences
own
on
the
play-
you
Language
see
for the
language
a
setup
menu.
This is the
menu
when you press SETUP.
er.
Initial
General
Settings
Operation
Disc Audio
Chinese
Disc Subtitle
English
Disc Menu
Rating
1
Press SETUP.
The
setup
Country
menu
TV
appears.
Menu
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Digital
Picture
Chinese
Audio
Output
Hungarian
TV
Russian
Other------------
Others
Aspect
selected
will show the current
item,
as
well
as
for the
setting
setting(s).
alternate
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
3
4
require
SETUP, RETURN,
5 setup
Press SELECT/ENTER to confirm your selection.
additional steps.
Some items
Press
or
Displays
PLAY to exit the
menu.
16:9 Wide: Select when
language
a
4:3 Panscan
16:9 Wide
Rating
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language
Original
Other
:
:
The
To select another
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Spanish
Italian
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Russian
Others
12
Other------------
Code
Aspect
Language
Audio
con-
bars
conscreen.
16:9 wide TV is connected.
a
Disc Menu
Country
Menu, Audio, and Subtitle.
fill your TV
4:3 Letterbox
DVD
for the disc's
standard 4:3 TV is
Disc Subtitle
Others
Select
masking
Disc Audio
Menu
Language
with
Displays pictures cropped to
sides of the picture are cut off.
Digital
Disc
a
nected.
Both
standard 4:3 TV is
images
picture.
4:3 Panscan: Select when
TV
Language
a
theatrical
above and below the
Press 3/4 to select the desired item.
screen
DVD
4:3 Letterbox: Select when
nected.
The
Output
Others
Polish
2
Audio
Italian
Language
Digital
Language
Spanish
Code
Aspect
Menu
Code
Aspect
Output
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The DRC and PBC
variety
output options.
player's Digital Audio Output according to the
Set the
type of audio system you
changed
use.
decoder
or
with
a
DTS
Country
TV
Code
Aspect
Menu
Language
Digital
Audio
Output
MPEG decoder.
amplifier.
The DVD
a
2-channel
player outputs
digital
sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
Others
Dynamic Range
DIGITAL
/PCM
Disc Subtitle
Stream/PCM
Disc Menu
PCM
format, you can hear a program's soundtrack in the most accurate and realistic presentation
and the
TV
Code
Aspect
Menu
Digital
Audio
at
Sample Freq.
48 KHz
Language
thanks to
digital
audio
technology. However,
a
quietest ones). Then, you may listen to a movie
losing clarity of sound. Set
lower volume without
DRC to On for this effect.
96KHz
PBC
Output
Set
Others
Sample Frequency
the
(DRC)
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Rating
Country
Control
With the DVD
possible,
DOLBY
Disc Audio
To
PBC On
Rating
decoder, Dolby Digital
PCM: select when connected to
stereo
PREATION
DRC On
Disc Menu
Dolby Digital decoder).
equipment
changed.
Disc Subtitle
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
be
Disc Audio
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equipa
can
between On and Off.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
ment with
settings
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
of audio
a
first select the
change
Sample Frequency setting,
Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz sig-
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
desired
nals to 48KHz
so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further
processing.
13
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
applies
to the
not suitable for
able for selection
more
on some
country-dependent.
disc
complete
the disc. These
scenes on
8, and alternatively,
1 to
scenes
Therefore, discs may contain Parental Control
information that
certain
DVD
Enter the code of
DVD
children.
Code
Country
suitable
discs.
or
scenes are
to
8
7
Disc Menu
6
Rating
5
Country
TV
Code
avail-
Menu
Country
TV
Audio
Unlock
Change
Others
1
2
3
Select
3
"Rating"
and
While
on
the
Setup
menu
using
the
buttons.
4
"Rating"
is
2.
selected, press
When you have not entered a password yet.
Enter a 4-digit password using the numbered buttons to create
a
a
tons to
4
Select
the
2
3
4
5
6
4-digit password using the numbered butconfirm the personal 4-digit security pass-
setup
While
Follow
Shift the
cursor
unless
an
alternative
scene
is available
The alternative must have the
lower
one.
If
no
will not be
same
played
on
rating
Press SELECT/ENTER to confirm your
then press SETUP to exit the
the code is
below
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
the
Steps
4-digit
1-2
as
code
shown above to the left
(Rating).
code, then press SELECT/ENTER.
Change using
the 3/4 buttons then press
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
If you
forget
your
4-digit
code
If you
forget
your
password,
to clear the current pass-
1
Press SETUP to
2
Use the Number buttons to enter the
display
time and veri-
menu.
word, follow the procedure below.
play-
3/4 buttons.
SELECT/ENTER.
the
setup
menu.
6-digit
number
"210499".
The
is cleared. "P CLr" appears on the disThe message will appear if the disc tray is closed. It
will be on the display until you try another feature.
rating
4-digit password
play.
menu.
3
14
using
the disc.
suitable alternative is found,
the 3/4 buttons.
1/2 buttons and select
or a
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
5 selection,
using
Note
Select
scenes
left.
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
3
rated
using
on
Confirmation of the
a
played. Higher
on
code
Enter the old
be
"Rating"
the second character
Follow
1 to 8: Some discs contain scenes not
the 3/4 buttons
selected, press 2.
Select the first character
1
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
3 of
step
2
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
using
Code is
Country
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Ratings
Output
menu.
Changing
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Code
Country
word, then press SELECT/ENTER.
Select
Audio
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter
Digital
1
2
Output
Language
Others
1
Digital
Code
Aspect
Menu
3
Language
US
Rating
are
4
Aspect
Code Set
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Subtitle
were
to the list
List", page 25.).
Disc Subtitle
The Parental Control feature allows
Disc Audio
disc, referring
Disc Audio
rated from
scenes are
Ratings
Code
(See "Country
whose standards
country/area
a
used to rate the DVD video
Enter
a new
code
as
shown above to the left
(Rating).
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
nected to the DVD
Audio
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
VCD2.0
DVD
the TV and select the video
General Features
the audio
on
input
source
Unless stated
otherwise, all operations
described
the remote control. Some
use
features may also be available
system
on
the
Setup
menu.
connected to the
Moving
player.
to another TITLE
DVD
1/3
1
Press OPEN/CLOSE to open the disc
tray.
When
Load your chosen disc in the
2 facing
tray, with the label
up.
double-sided DVD is inserted, make
the side you want to play is facing up.
When
3
a
Press OPEN/CLOSE to close the
READING appears
starts
automatically.
tray.
might
appear
Moving
DVD
When
instead.
The
is
or
loading
a
DVD
you want to
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER
to start
or
MENU to return to the
a
title
on a
more
menu screen.
buttons
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
as
one
menu screen.
one
chapter
can move
or a
to another
operating procedures
for
(0-9).
two-digit numbers,
press the buttons in
rapid
succession.
Slow Motion
You also may set PBC to Off under
13.
1 Press SLOW t
menu
setup.
See page
The
player
DVD
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
VCD1.1
during playback.
will enter SLOW mode.
or
T to select the
Control", on page 14).
DVDs may have a region code.
Your player will not play discs that have
player.
The
region
3
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
1/16, T 1/8, T 1/4 or T 1/2 (forward).
To exit slow motion mode, press PLAY.
or
T
(see
"Parental
different from your
player is 3 (three).
T
or
VCD2.0
t
be entered and/or the disc must be authorized
--
than
follows:
2 Use the SLOW t
--
more
track, you
Note
For
Notes
--
1/3
disc has
than
may differ depending on the disc.
Follow the instructions on the each menu screen.
using
the
and the exact
stopped, then
(0-9) to
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
playback.
Press TITLE
is
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
displayed
may be displayed first after
Video CD which contains a menu.
Use the 1 2
to
can move
Press SKIP/SCAN .
menu screen
DVD
title, you
playback
1/12
VCD1.1
disc has
a menu screen
one
to another CHAPTER/TRACK
chapter/track
If
than
more
follows:
as
Press DISPLAY when
the TV screen, and playback
If playback does not start,
menu
disc has
press the appropriate numbered button
select a title number.
sure
on
press PLAY.
In some cases, the disc
a
another title
Note
Slow motion
a
region
code
playback
in
reverse
is not
applicable
for
Video CD.
code for this
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
2 You
now
Search
during playback.
VCD2.0
two seconds
during playback.
The
now
player
will
press REPEAT.
currently playing,
icon appears
the disc
repeat
on
the TV
currently playing,
All icon appears
Repeat
3 To exit
The
screen.
press REPEAT
a
Repeat mode,
screen.
press REPEAT
Off icon appears
Repeat
the TV
on
on
the TV
a
third time.
screen.
Note
VCD1.1
1 Press and hold SKIP/SCAN .
Repeat Track
The
go into PAUSE mode.
picture frame-by-frame by pressing
repeatedly on the remote control.
DVD
the track
second time.
advance the
can
PAUSE/STEP
Repeat Track/All/Off
-
repeat
The
2 To
VCD1.1
will
player
1 To
Frame-by-frame playback
1 Press PAUSE/STEP
The
Video CDs
(continued)
On
> for about
or
Video CD with
a
setup
menu
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
Repeat
to
use
A-B
PBC, you
the
must set PBC to Off
Repeat
VCD2.0
DVD
the
on
function. See page 13.
VCD1.1
to select the
3 To exit SEARCH
mode, press PLAY.
A*
To
AB
repeat
a
sequence in
A- appears
briefly
2 Press A-B
begins (a-b
VCD1.1
Karaoke DVD
a
title:
1 Press A-B at your chosen
the TV
on
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat sequence
repeat appears on the player's display).
again
A-B appears
Random
OFF
briefly
on
3 To cancel the sequence, press A-B.
1 Press RANDOM
The unit
"RAND."
during playback or in stop mode.
automatically begins Random Playback and
appears on the display window.
2 To return to normal
"RAND."
disappears
playback, press RANDOM
on the display window.
until
Time Search
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
Tips
By pressing SKIP/SCAN . or > during
playback, the unit selects another title (track)
resumes Random playback.
0:16:57
DVD
play
on
appears
the
The Time Search box shows the
and
current disc.
elapsed playing
seconds, press 3/4
Search icon in the
on-screen
at
dis-
screen.
Random
2 Within 10
The
during playback.
playing
on-screen
time of the
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Note
This function
works with DVD Karaoke discs and
only
3 Within 10
video CD without PBC.
the
seconds,
required
onds from left to
Repeat
CHAPT
DVD
VCD2.0
the number buttons to enter
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
TRACK
TITLE
use
start time. Enter
OFF
4 Within 10
seconds, press SELECT/ENTER
to confirm
the start time.
DVD Video Discs
1 To
repeat
the
-
Repeat Chapter/Title/Off
currently playing chapter,
Playback
an
press
invalid
starts from the selected time
on
the disc. If you enter
time, playback will continue from the
current
point.
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
3D Surround
screen.
repeat the title currently playing, press REPEAT
DVD
VCD2.0
VCD1.1
a
3D SUR
NORM.
second time.
The
Repeat Title
3 To exit
The
icon appears
Repeat mode,
Repeat
on
the TV
press REPEAT
Off icon appears
on
the TV
screen.
a
third time.
screen.
This unit
can
produce
a
3D Surround
simulates multi-channel audio
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
2 To turn off the 3D Surround
again
to select "NORM".
or
system.
1 Press SOUND to select "3D SUR"
16
effect, which
playback
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
move
Or,
the
through
normal
resume
playback
DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
or
use
the 1/2/3/4 buttons to
return to
paused image.
DVD
Title Menu
1 Press TITLE.
If the current title has
screen.
Note
The
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
multi-angle
scenes.
Marker Search
your selection,
highlight
then press SELECT/ENTER.
picture.
3 Press CLEAR to
the
buttons to
level
magnification
DVD
the contents of DVD Video
Checking
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
remove
menu
menu
will appear
the
on
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
a
memorized
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
points
on a
1
Marked Scene
a
disc
During
playback,
The MARKER SEARCH
2 Within 10
to
The number of the current
menu
will appear
seconds, press 1/2
on
to select
recorded at different
a
different
camera
angle
camera
appears
on
the
a
display.
a
the
screen.
Marker
Changing
num-
1
the Audio
Language
DVD
ENG
D
6CH
will start from the Marked
remove
scenes
1/1
press SEARCH.
3 Press SELECT/ENTER.
4 To
DVD
again.
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
ber that you want to recall.
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press MENU
If the disc contains
briefly.
screen
is
menu
remove
Press AUDIO
scene.
the MARKER SEARCH menu, press
ferent audio
repeatedly during playback
language or audio track.
to hear
dif-
a
SEARCH.
Subtitles
To clear
1
a
During
disc
playback,
The MARKER SEARCH
2
1
ENG
Press SUBTITLE
press SEARCH.
menu
will appear
on
the
different subtitle
screen.
repeatedly during playback
languages.
to
see
the
Press 1/2 to select the Marker number that you want
to
3
DVD
Marked Scene
Note
erase.
If
Press CLEAR.
appears, the feature is not available
on
the disc.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
with Audio CD and MP3 Discs
Operation
Playing
The DVD
Audio CD and MP3 discs
an
Player
CD-ROM, CD-R,
Before
MP3 formatted
recordings
on
read the notes
recordings,
on
MP3
page 22.
CD
1 Press and hold SKIP/SCAN .
CD-RW discs.
or
MP3
playing
Recordings on
play
can
Search
two seconds
during playback.
The
now
player
will
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
>
or
repeatedly
to select the
Insert
1
The
a
disc and close the
menu
CD
tray.
the TV
on
appears
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
screen.
3 Search
MP3
Program
Program
TRACK 1
TRACK 1.MP3
TRACK 2
TRACK 2.MP3
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
speed
and direction
are
indicated
on
the
menu screen.
4 To exit SEARCH
mode, press PLAY.
TRACK 7.MP3
TRACK 7
Clear All
TRACK 8
STER.
0:56:35
Audio CD
Clear All
TRACK 8.MP3
00:00
NORM.
MP3
menu
CD
Random
OFF
1
1 Press RANDOM
menu
during playback
or
when
playback
is
stopped.
Press 3/4 to select
2 Playback
During playback,
To
the current track's
stop playback
at any other
and
elapsed playing
2 To return to normal
edly
play
time, press STOP.
To
during playback.
playback,
again.
press PLAY
or
1
press
PAUSE/STEP
or
>
Press SKIP/SCAN . twice
previous
case
window and
or
to return to the
repeat
of audio
a
sequence.
-"
Repeat
briefly
step
CD,
using
directly
to any
track,
the numbered buttons
CD
icon appears
repeat all tracks
on a
on
enter
(0-9)
MP3
the
the
on
menu screen.
begins
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
Repeat
icon and "OFF" appear
on
the
play,
press
menu screen.
This unit
produce
can
disc, press REPEAT
a
3D Surround
effect, which
simulates multi-channel audio
playback
conventional stereo
instead of the five
speakers,
speakers normally required
channel audio from
menu screen.
CD
a
again
or
to listen to multi-
home theater
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
from two
during playback.
effect, press SOUND
to select "NORM".
second time.
The
Repeat
3 To cancel
The
Repeat
All icon appears
Repeat mode,
on
the
menu screen.
press REPEAT
Off icon appears
on
the
a
third time.
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STEREO, LEFT, or RIGHT).
ferent audio channel
18
appears
at your chosen end point.
icon and "A B" appears on the menu screen,
again
back to
repeat the track currently playing, press REPEAT.
Repeat Track
Repeat
icon and "A
3D Surround
to go
Repeat Track/All/Off
a
CD
The
more
2 To
press RANDOM repeat"RAND." disappears on the dis-
press A-B at your chosen start-
The
to
during playback.
The
or
menu screen.
A-B
and the sequence
track.
the track number
1 To
Playback and
display window
During disc playback,
ing point.
The
MP3
briefly during
playback to go to the next track
beginning of the current track.
In
CD
to another Track
Press SKIP/SCAN .
the
the
on
playback,
until RANDOM
2 Press A-B
Moving
Random
"RAND." appears
MP3
1 Press PAUSE/STEP
2 To return to
or
menu screen.
Repeat
CD
Pause
automatically begins
RANDOM
time will appear on the display.
Playback will stop at the end of the disc.
3
The unit
track then press PLAY.
a
starts.
CD
dif-
Programmed Playback
Programmed Playback
CD
MP3
with Audio CD
VCD2.0
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
The
2
menu
tracks for
or
is
displayed
on
the TV
Video CD with
menu
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 13.
Program
Insert Video CD and close the
1
tray.
2
screen.
during playback or in
the Program Edit mode.
mode to enter
on
a
60 tracks
Press PROGRAM
the
Press PROGRAM while
The VCD
Program
stop
menu
OPERATION
tray.
is
playback
stopped.
will appear.
VCD
Program
E
TRACK 1
E
The
On
a
setup
(Audio CD)
Insert the disc and close the
1
with Video CD
Programmed Playback
and MP3 Discs
Program can
(MP3 disc).
VCD1.1
mark will appear to the right of the word
the right side of the menu screen.
TRACK 2
Program
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
Note
Press PROGRAM to exit the
E
the
3
mark will
Edit
Program
mode;
disappear.
Press 3/4 to select
Note
track, then press
SELECT/ENTER to place the selected track
the
Program
list.
step
4 Repeat
Program
3 to
Press RETURN
a
additional tracks
on
Program
E
MP3
Program
TRACK 12
TRACK 1.MP3
TRACK 8.MP3
TRACK 2
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
TRACK 7
To
E
To
STER.
NORM.
Repeat Track
The
00:00
1
MP3
menu
track you selected last is
highlighted
on
6 playing.
7
move
to the
previous
list, press
on
the
menu screen.
on
the
a
third time.
menu screen.
a
Track from
1 Press PROGRAM
E
The
Program
List
during playback or in
Program Edit mode.
the
page.
stop
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
to the next page.
move
menu screen.
press REPEAT
Off icon appears
mode to enter the
Press 3/4 to select the track you want to start
Press MENU to
the
on
on
menu
the program list.
Press TITLE to
icon appears
Repeat mode,
Repeat
Erasing
programmed
with
left.
on
Tracks
All icon appears
Repeat
OFF
Press 2.
The
"Programmed Playback
the program
second time.
a
To cancel
The
5
3-7 of
repeat all tracks
Clear All
TRACK 8.MP3
menu.
repeat the track currently playing, press REPEAT.
The
TRACK 7.MP3
Clear All
TRACK 8
Audio CD
steps
REPEAT
TRACK 5
0:56:35
Follow
Audio CD and MP3 Disc"
Repeat Programmed
TRACK 1
Program
the
list.
CD
PROGRAM to exit the
on
3
place
or
erase
4 Press CLEAR.
Press PLAY to start.
The track will be erased from the
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Program
list.
Playback begins
Playback stops
after
the program list.
playing
the last
programmed
track
on
Erasing
the
1 Follow
steps
List"
as
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
To
resume
are
for the disc will be erased.
also cleared when the disc is removed.
normal
playback
from
programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator
disappears
in the
display
window.
19
Additional Information
Last Condition
DVD
This
player
Controlling
Memory
VCD1.1
CD
Your remote control is
memorizes the last condition for the last disc
you have watched. Settings remain in memory even if
you remove the disc from the player or switch off the
If you load a disc that has its settings memothe latest stop position is automatically recalled.
player.
rized,
player
well
as
capable
of
your DVD
operating
limited functions of LG TV.
operate for your LG TV.
Before using the remote control, press the DVD
TV button to select the device to be operated.
1
To switch the remote control mode
Notes
--
as
Follow the instructions below to
ferent
--
the TV
be
device),
sure
(to operate
to press the DVD
or
or
a
dif-
TV but-
ton first.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
2
The
POWER, CH(4/3), VOL (1/2), MUTE and
TV AV buttons
ate the
it.
on
remote control
are
used to oper-
LG TV.
Screen Saver
Setting
The
Remote Control Codes for LG TV
appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
This remote control
minutes, the DVD Player will automatically
Code 2 is for LG TV with PAL
screen saver
picture
With certain
ering
or
means
Setting
DVD
VCD2.0
VCD1.1
discs, the playback picture may be flick-
Dot Crawl is shown
Vertical
interpolation
lines. That
on
straight
or
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video
about 3 seconds
during
The
multi
system.
from the
factory,
the remote
To set the remote control to Code 2, hold down both
the TV button and "2" number button on the remote
control.
(If the batteries in the remote control are
replaced while the remote control is set to Code 2,
the setting will revert Code 1.)
To set the remote control back to Code 1, hold down
both the TV button and "1" number button on the
remote control.
video
playback.
displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
new
shipped
or
system.
control is set to Code 1.
mode, press and hold DISPLAY
disc
two remote control
Code 1 is for LG TV with NTSC
turn itself off.
When the unit is
Video Mode
supports
codes for LG TV: Code 1 and Code 2.
mode number selected is
Video mode
change
MODE1
→
MODE2
MODE5
→
MODE1
→
sequence:
MODE3
→
MODE4
→
If you turn off the power, the video mode will be back
to initial state (MODE1).
20
Note
If the remote control does not
TV, try
one
of the other code
originally supplied
Due to the variety
COMPANY cannot
will
operate your particular
or use
the remote control
with the LG TV.
of codes used
by manufacturer, OUR
guarantee that the remote control
operate every model of the LG TV.
Additional
Using
1
2
Information(Continued)
the Karaoke Function
Load
a
karaoke disc.
level to
prevent acoustic feedback (e.g.
Connect
a
before
to MIC1
or
KEY: You
MIC2
or
ECHO is set to initial
can
change
the
key by pressing
the 1/2
If you select Harmony of EFFECT after changing
the key, KEY is set to initial mode automatically.
?
If audio mode of DVD is set to 6CH
AUDIO, you
sing
a
1/2 is
by pressing
not select KEY.
can
Special Effects. Each time
Special Effect changes as
can use
pressed,
the
shown below.
If you want to set KARAOKE
6-8.
Press KARAOKE
menu
option
follow
Off
steps
during playback.
an
desired item
MELODY
display changes
Chorus
Harmony
Flange1
Flange2
If you change KEY or ECHO, EFFECT is set to
initial mode (Off) automatically.
?
as
or
→
→
→
→
VOICE: If you wish to sing a duet with the recorded
karaoke singer, select a voice you desire.
appears.
Use 3/4 to select
7 KEY, VOICE,
The
by
?
playback.
MIC VOL control and then
KARAOKE
the echo volume
change EFFECT,
automatically.
EFFECT: You
5 song.
adjust
buttons.
microphone
Press PLAY to start
can
the
to both sockets.
Adjust
6
If you
mode
?
a
connecting
value of the item
adjust
the 1/2 buttons.
pressing
Set the MIC VOL control to the minimum
howling sound)
microphone.
4
Use 1/2 to
selected.
ECHO: You
loud
3
8
(ECHO,
EFFECT).
Voice Select
shown in the chart below.
Left
Output
speaker
Right speaker
CH1
Voice1
Voice1
CH2
Voice2
Voice2
CH3
Voice1
Voice2
Off
None voice
None voice
MELODY: If you wish to sing only to the backing
or orchestra unaccompanied by a vocal guide
band
melody,
9
set Guide
Melody
to OFF.
Press KARAOKE to exit the KARAOKE
menu.
Notes
If
microphone
to the DVD
player,
changed to STEREO during playback
of Audio CD/Video CD and audio channel is not changed.
the sound mode is changed to NORMAL.
the Digital Audio Output mode of SETUP menu is
changed to PCM and Digital Audio Output mode is not
changed.
SOUND button is not available during DVD playback.
SOUND and AUDIO button is not available during Audio
CD/Video CD playback.
The microphone may not be available during special playback. (ex. slow)
The karaoke feature functions only with karaoke-compatible
-
a
the audio channel is
-
-
-
-
-
discs.
The VOICE and MELODY
some
menus
may not be available
on
karaoke discs.
The Karaoke function may not be available on some discs
(ex. MP3, DTS CD or when DVD audio mode is set to DTS, etc.).
For
more
details, refer
to the information
supplied
with the
disc.
21
OPERATION
Additional
Notes
on
Information(Continued)
MP3 Discs
About MP3
An MP3 file is audio data
compressed by using MPEG1,
layer-3 file-coding scheme. We call files that
have the ".mp3" file extension "MP3 files".
The player can not read an MP3 file that has a file
extension other than ".mp3".
The player can not read a fake MP3 file that has a
file extension ".mp3".
the audio
MP3 Disc
compatibility
with this
player
is limit-
ed
as
1.
4.
Sampling Frequency / only at 44.1kHz
Bit rate/ within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
5.
A
2.
follows:
-
3.
Creator", which
single
creates
session disc
track. If there is
no
ISO9660 file
an
requires
system.
MP3 files in the first
MP3 file in the 1st
track, it
cannot
MP3 files. If you wish to playback MP3
format all the data in the disc or use a new
playback
files,
one.
We do not recommend
6.
use
File
7.
and
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate the ".mp3" extension
e.g. "********.MP3".
Do not use special characters such
8.
]:;\/.,"
as
or
less
"_?!><+*}{`[@
etc.
Total number of files
9.
Please
finished CD-R discs
on
the disc should be less than
200.
10. Use 74 minute CD-R discs
minute CD-R
This DVD
(700M)
(650M),
do not
use
80
software.
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
of recordable disc formats
MP3
are
are
optimal
automatically
many different types
CD-R containing
(including
files).
Customers should also note that
required
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
sought
22
from the
copyright
owner.
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
a
disc.
cord into the wall outlet
(Check
that the DVD or,
audio CD indicator in the
window is
not work.
No
service.
contacting
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
The video cable is not connected
display
lit.)
appropriate video input mode
the picture from the DVD
so
the TV
on
appears
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
signal output.
The audio cables
are
not connected
the TV.
on
audio receiver
input
mode of the
you can listen to the
sound from the DVD player.
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
the
on
equipment
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert
a
disc.
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
An
unplayable
disc is inserted.
Insert
a
playable
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed
player.
at the
of the DVD
player.
There is
an
obstacle in the
rating
tray correctly
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
the disc
Clean the disc.
the
The remote control
on
guide.
of the DVD
Operate
(7 m).
player.
the remote control within 23 ft
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
23
REF NC
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
24
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
Afghanistan
ET
Spain
Ethiopia
LI
AF
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
BH
Bahrain
GQ
Equatorial
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
(European
Guyana
Guinea
Georgia
& S. Sandwich
(USA)
Republic
French Southern
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Taiwan
HT
Haiti
NI
Nigeria
Nicaragua
TW
Canada
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
CL
Chile
CM
Cameroon
CN
Outlying
Islands
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
IQ
Iraq
PA
Panama
UZ
Uzbekistan
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
Verde
JP
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Germany
Djibouti
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
Republic
IO
Principe
Territories
CA
CF
Mayen
Islands
Anguilla
Guinea
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
25
REF NC
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X67X242mm(wxhxd)
2.7
(approx.)
kg
Operating temperature
5˚C to 40˚C
Operating humidity
5%to90%
(41˚F
to
104˚F)
System
Laser
Semiconductor
laser, wavelength
650
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
S-VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Vp-p
75 Ω, sync
negative
sync, Mini DIN
4-pin
x
x
1
1
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0Vrms(1KHz,0dB),330Ω,RCAjack(L,R)x1
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
DTS and DTS
26
Digital
Out
works.
are
Dolby Laboratories. Dolby and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
registered
trademarks of
Digital
Theater
Systems,
Inc.
of
Dolby
Laboratories.
P/NO
:
3834RS0043W
Download PDF