LG | DR7400W | LG DR7400W Owner’s Manual

DR7400NW4M-HA4MLL-ENG
DVD RECORDER
OWNER'S MANUAL
MODEL
Before
:
DR7400W
adjusting this product,
booklet carefully and completely.
connecting, operating
please read this instruction
or
CAUTION concerning the Power Cord
CAUTION
Most
appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
point
within
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords,
This
The exclamation
certain.
an
equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in
such as a bookcase or similar unit.
a
confined space
This
To
product employs
a
Laser
System.
product, please
read this
proper use of this
owner's manual carefully and retain it for future reference.
ensure
Should the unit require maintenance, contact
service center.
an
authorized
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION:
CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
2
vases, should be
placed
on
the apparatus.
cracked wire insulation
are
dangerous.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
SERIAL NUMBER:
can
find the serial number
on
the back of the unit. This
unique to this unit and not available to others. You
should record requested information here and retain this
guide as a permanent record of your purchase.
number is
Model No.
Serial No.
CAUTION:
or
Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
You
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
damaged
or
______________________________
______________________________
Contents
Playback.............................24-30
.24-27
Playing a DVD, Video CD, or Audio CD
PlayinganMP3File.....................28
ViewingaJPEGFile.....................29
.30
Using the thumbnail menu for JPEG file
.30
UsingPlaylistwithMP3orJPEGfiles
.
Introduction.............................4-8
SymbolUsedinthisManual................4
NotesonDiscs..........................4
.
.5
RecordableandPlayableDiscs
PlayableDiscs..........................5
.
.
.
.
.
.
.
.
.
.
.
FrontPanelandRearPanel................7
RemoteControl.........................8
RemoteControlOperation.................8
HookupandSettings....................9-23
.
.
.
.
.
.
.
.
.
.9
ConnectingtoanAmplifier.................9
.10
Accessory Audio/Video (A/V) Connections
AutoSetUp...........................11
.11
About DVD Recorder Initial Setup menu
UsingtheInitialSetupmenu...............12
TVSetup...........................12-14
.
.
.
.
.
.
.
.
AutoScan..........................12
ProgramEdit........................13
ManualSetting......................13
AutoInstall.........................14
RecordingSetup........................14
RecordModeSet....................14
Overwrite..........................14
ChapterMark.......................14
GeneralSetup.........................15
TVDisplay.........................15
AngleMark.........................15
OSD (On-Screen Display) Language
.15
LastMemory........................15
ClockSetting........................15
VideoSetup...........................16
Quality............................16
AudioSetup.........................16-17
Post DRC (Dynamic Range Control)
.16
SPDIFSetup........................16
DolbyDigital........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Recording............................31-34
AboutDVDrecording....................31
BasicRecordingfromaTV................32
OTR(OneTimeRecording)...............32
TimerRecording........................33
.34
Checking Timer Recording Details
.34
RecordingfromanExternalInput
.
.
.
.
Disc-relatedterms.......................6
ConnectionstoYourTVandAerial
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Editing...............................35-42
Title List and Chapter List Menu Overview
.35
DeletingaTitle.........................36
NamingaTitle.........................36
ChangingTitleThumbnails................37
.
.
.
DivideOneTitlesIntoTwo................37
AddingChapterMarkers..................38
DeletingChapterMarkers.................38
HideaChapter.........................38
UsingtheDiscEditmenu...............39-42
NamingaTitle.......................39
ErasingaTitle.......................40
ProtectaTitle.......................40
.40
ChangingTitleThumbnails..
EditingaTitlebyChapter..............41
AddingChapterMarkers...............41
DeletingChapterMarkers..............42
HideaChapter......................42
OverwritingRecording.................42
.
.
.
.....
.
.
Reference............................43-47
Controlling
Your TV with the
Supplied
RemoteControl........................43
.
3DSurround........................17
Preference..........................18-19
LanguageCodes.......................44
AreaCodes...........................44
Troubleshooting......................45-46
Specifications..........................47
TVType...........................18
Audio/Subtitle/Disc Menu Language
.18
.
.
.
.
.
ParentControl....................18-19
Default............................19
UsingtheDiscOperationmenu
.
.
.
.
.
.
.
.
.20-22
.
DiscErase.........................20
Finalize............................21
DiscProtect........................21
MakeEditsCompatible................21
Adapt.............................22
DiscInformation.....................22
General
Explanation of On-Screen Display
UsingtheOn-ScreenDisplay.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.23
.23
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
About the
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD video disc.
and maintenance of your recorder. Should the unit
require service, contact an authorized service location.
Symbol
Used in this Manual
The
flash
lightning
symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute
electric shock.
a
risk of
Notes
on
Handling
Discs
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
+RW
+R
making
of the
following symbols
represented by the
one
to the disc
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
DVD+RW disc
DVD+R disc
DVD
DVD-Video disc
VCD
Video CDs
ACD Audio CDs
MP3
MP3 files
JPEG JPEG files
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Moisture Condensation
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two
If you
or
three hours without
product in
damage discs/tapes and
4
use
this
operating
situation, it may
internal parts.
such
a
it.
Recordable and
DVD+RW
(Digital
These Discs
on
the
same
Playable
Discs
Playable
Video Disc
can
+
be recorded
ReWritable)
on repeatedly. Recordings
can
be erased, then you
again
DVD+RW
on
Video Disc
(Digital
These Discs
it any
record
Disc.
compatible players (automatically finalization)
The edited contents is playable on DVD+RW compatible players only
Recordings can be edited the title/chapter
DVD+R
can
can
be
Recordable)
recorded only once. After
after
finalizing
+
you finalize
a
DVD+R, you cannot record
on
it
or
edit
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
The recommendable recordable DVD
Note:
discs
If
DVD+RW
SONY (2.4x, 4x, 8x, 16x)
SONY (2.4x)
Playable
using
a
personal
other DVD recorder, you cannot format
the disc using this recorder. So if you want to use the
disc
or
this recorder, you must format the disc
the original recorder.
TDK
(4x)
Mitsubishi (4x, 8x)
Ricoh (2x, 4x, 8x)
DVD+RW discs is recorded
computer
DVD+R
TDK
a
(2.4x)
Philips (4x)
Ricoh (2.4x)
HP (2.4x, 4x)
on
using
Discs
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
or
cm
/ 12
can
cm
be
purchased
or
rented
disc)
CD-Rs/CD-RWs in VIDEO
CD/Super VIDEO CD
format
AudioCD(8cm/12cmdisc)
Music CDs
CD-Rs/CD-RWs in music CD format that
or
CD-R/CD-RW
(8
cm
/ 12
cm
can
be
purchased
disc)
CD-R/CD-RW discs that contain audio titles, MP3
or
JPEG files.
Notes:
--
--
--
--
--
--
recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself, some
CD-R/RW (or DVD±R/±RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play
if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with
the software publisher for more detailed information.)
Depending
on
the conditions of the
5
Chapter (DVD video discs only)
A chapter is a segment of a title such
Disc-related terms
film
DVD+R/DVD+RW
DVD +R is two different standards for recordable DVD
drives and discs. This format allows information to be
recorded onto the DVD disc
only
once.
DVD +RW is two standards for re-writable media,
meaning the DVD content can be erased and re-
recorded.
Single-sided
discs
can
hold 4.38
and double-sided discs hold twice
VCD
as
Gigabytes
much.
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
quality
stereo sound.
or one
interview in
a
series. Each
as a scene
chapter
in
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
Scene
On
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Track
A distinct element of audiovisual information, such
MPEG is
an
international standard for video and audio
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
to locate the track you want. DVD discs allow one
audio.
of audio.
MP3
Regional
audio
popular compression format used for digital
files that yields very high near-CD quality.
track of video
Expert Group. JPEG is a compressed
that allows you to save images with no limit
file format
the number of colors.
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
6
code of the recorder and DVDs
DVD discs indicates which
type of the recorder
play only DVD
discs labeled 3 or ALL. If you try to play any other
discs, the message "Incorrect region code. Can't play
can
play
those discs. This unit
can
back" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
is
prohibited by
area
limits.
Notes on DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be
available
Title
and several tracks
designed and manufactured
for playback of Region 3 encoded DVD
software. The region code on the labels of
3
some
Joint Pictures
(with multiple angles)
This recorder is
a
JPEG
on
as
the
MPEG
MP3 is
a
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business
purposes may not be
played
on
the unit.
Front and Rear Panel
ab c d
e
f
ghi
jk
a
b
c
d
POWER button
Switches the recorder ON
OFF.
or
recording.
Disc
Remote Sensor
Point the recorder remote control here.
j
VIDEO IN/AUDIO IN (Left/Right)
Connect the audio/video output of
(Audio system,
Camcorder, etc.).
(V/v)
down
memorized channels.
through
k
an
TV/ Monitor,
external
VCR,
S-VIDEO IN
Connect the S-Video output of
disc here.
a
(clock,
etc).
source
Tray
Insert
i
time.
or
disc tray.
window
program number,
z (REC)
Starts recording. Press repeatedly to set the
PROG.
(OPEN/CLOSE)
Opens or closes the
Shows the current status of the recorder
x
(STOP)
Stops playback
Z
h Display
(N)
Starts playback.
Scans up
f
or
PLAY
recording
e
g
an
external
source
(TV/ Monitor, VCR, Camcorder, etc.).
ab
cd
e
f
gh
a
f
AERIAL
Connect the aerial to this terminal.
b
g
RF. OUT
Passes the
signal
from the AERIAL to your
TV/monitor
c
d
e
AUDIO OUT (Left/Right)
Connect to a TV with audio
VIDEO OUT
Connect to a TV with video
AC Power Cord
Plug into the power
source.
AUDIO IN 1 (Left/Right)
Connect the audio output of
an
external
source
(Audio system, TV/Monitor, VCR, Camcorder).
hVIDEOIN1
inputs.
Connect the video output of
an
external
source
(Audio system, TV/Monitor, VCR, Camcorder).
inputs.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
7
Remote Control
CLEAR: Removes
the
on
Program
track number
a
List
the Marker Search
or a
mark
on
menu.
SUBTITLE: Selects
THUMBNAIL: Selects
ENTER
picture for the current title and
chapter for use in the Title List.
Acknowledges menu selection.
Displays information while
viewing a TV program.
Skips 30 seconds
forward on the disc (about the
length of a typical TV:
commercial).
TITLE:
Displays
MARKER: Marks any
-AV: Selects the TV's
point during
menu on a
Opens
PLAY
(X) : Pause
recording temporarily,
to exit pause mode.
or
(N): Starts playback.
(z): Starts recording. Press
repeatedly to set the recording
time.
REC MODE: Selects the
(HQ, SQ, LQ
REPEAT:
(left/right/up/down):
Selects an option in the menu.
PR v / V (up/down): Scans up or
down through memorized
channels.
A-B:
Repeat
AUDIO: Selects
language (DVD)
channel (CD).
AV:
an
the
audio
to use for
Changes
input
recording (Tuner, Front AV,
AV).
CHP. ADD: Inserts
marker when
8
RETURN
Rear
chapter
playing/recording.
a
-
-
POWER: Turns the TV
on or
off.
source.
PR +/--: Selects TV's channel.
VOL +/--:
TV's volume.
Adjusts
Enlarges
video
image.
Remote Control
Operation
remote sensor and press the
buttons.
Remote Control
Battery
Installation
Remove the
battery
cover on
the
of the Remote Control, and
insert two R03 (size AAA) batteries
rear
with
and
matched
correctly.
(O)
Removes the
Displays
the
menu.
menu
of
a
video CD
with PBC.
SCAN (m / M): Search
backward or forward.
Displays
Marker Search
menu.
audio
or an
Repeat chapter, track,
SEARCH:
sequence.
or
recording
EQ).
title, all.
-
-
OFF.
REC
mode
the disc's Title
Point the Remote Control at the
POWER: Switches the recorder
ON
Timer
and
PAUSE/STEP
playback or
press again
thumbnail
TV Control Buttons
ZOOM:
OPEN/CLOSE (Z):
closes the disc tray.
a
menu, if available.
-
DVD disc.
b / B / v / V
Displays
menu.
MENU/LIST: Accesses
options
TIMER REC:
Record
playback.
a menu.
subtitle
a
Display.
INSTANT SKIP:
in
or
language.
-
numbered
(x): Stops playback
recording.
DISPLAY: Accesses On-Screen
-
0-9 numerical buttons: Selects
STOP
Caution
SETUP: Accesses
Setup
or removes
the
menu.
SKIP(./>):Gotonext
chapter or track. Returns to
beginning of current chapter or
track or go to previous chapter or
track.
Do not mix old and
new
batteries.
Never mix different types of
batteries (standard, alkaline,
etc.).
and
Hookup
Settings
Connections to Your TV and Aerial
1.
2.
3.
Remove the aerial cable plug from your TV set
and insert it into the aerial socket at the back of
the recorder.
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm
Coaxial Cable supplied (R). The RF. OUT jack
passes the signal through from the AERIAL jack.
Video connection
Connect the VIDEO OUT
Recorder to
the video in
cable
Audio
jack
on
the
(Left/Right)
jack on the DVD
TV using the video
(V).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1.
Connect
jack to the corresponding in jack on your
amplifier. Use an optional digital audio cable (X).
2.
You will need to activate the recorder's
output. (See "Audio Setup"
Digital
Caution
Make sure the recorder is connected directly to the
TV. Tune the TV to the correct video input channel.
Do not connect your recorder via your VCR. The
DVD image could be distorted by the copy
protection system.
A
digital multi-channel
sound quality. For this
provides
the best
audio formats
supported by your recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS
be in DTS
AUDIO INPUT
VIDEO
INPUT
Licensing agreement,
digital
the
digital output will
out when DTS audio stream is selected.
Notes:
--
If the audio format of the
digital output
does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--To
Rear of TV
see
the audio format of the current DVD in the
press AUDIO.
This recorder does not perform internal
display,
decoding
of
a
DTS sound track. To
(2 channel)
enjoy DTS
multi channel surround, you must connect this
recorder to a DTS compatible receiver via one of
this recorder's
R
connection
you need a multi-channel
Audio/Video receiver that supports one or more of the
--
ANTENNA
INPUT
page
Multi-channel sound
on-screen
Aerial
on
digital
16-17).
Connection
right AUDIO OUT jacks of the
DVD Recorder to the audio left and right IN jacks on
the TV using the audio cables (A). Do not connect
the DVD Recorder's AUDIO OUT jack to the phono
in jack (record deck) of your audio system.
--
of the recorder's DIGITAL AUDIO
OUT
Connect the left and
--
one
digital
audio outputs.
AV
Rear of the recorder
A
X
Connecting
to an Amplifier
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
recorder to the audio left and right in jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
COAXIAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
9
Accessory
Audio/Video
(A/V)
Connections
Connect the
rear
panel
input jacks
on
the recorder's front and
to the audio/video out
accessory component,
using
jacks
on
your
audio/video cables.
Note:
If you
use
VIDEO IN
Jack
the S-VIDEO IN
jack
on
the
jack on the front panel,
front panel is not available.
the
panel of Accessory Component
(VCR, Camcorder, etc.)
S-VIDEO
OUTPUT
AUDIO
OUTPUT
OR
VIDEO
OUTPUT
OR
Rear of
the recorder
10
Front of
the recorder
Auto Set
About DVD Recorder Initial
Up
After the POWER is
for the first time to turn
pressed
on the unit, the [Initial Setup Wizard] function
clock, OSD language and tuner channels
automatically.
Follow the
step-by-step questions
sets the
until the setup is
Setup
By using the Setup Displays, you can make various
adjustments to items such as picture and sound.
1.
2.
Press ENTER to
move
next
Press SETUP and the
Setup]
complete.
1.
menu
menu
[DVD Recorder Initial
appears.
step.
SHokupand et ings
Enter the necessary information for date and time.
b / B (left/right) buttons: Moves the cursor to the
previous or next column.
v / V (up/down) or number buttons: Changes
setting at the current cursor position.
ENTER button: Confirms your setting.
[Timer REC] (Timer Recording)
For unattended recording, you can 7 programs
within a period of 1 month. (page 33)
the
[Disc Oper] (Disc Operation)
You can do following functions: Erase, finalize,
protect, make comp, adapt, check disc
information. (page 20-22)
[Disc Edit]
You
can
do
following
edit functions for titles:
Label, Erase, Protect, Chapter Edit, Thumbnail.
3.
Select
screen
language for
display. Press
a
the
Setup
menu
v / V to select a
and
(page 39-42)
on-
[Init Setup] (Initial Setup)
By using the Initial Setup, you can make various
adjustments to items such as picture and sound,
as well as select a language for the subtitles.
(page 12-19)
language
then press ENTER.
2.
4.
Use b / B to select
an
option
then press ENTER.
The recorder will
available
automatically cycle through all
channels in the area and place them in
the tuner's memory.
5.
Press ENTER while
[Finish] is highlighted
to finish
setup.
11
Using
1.
Press SETUP and the
Setup]
2.
the Initial
menu
Setup
TV
menu
[DVD Recorder Initial
appears.
Setup
Auto Scan
equipped with a frequency
synthesized tuner capable of receiving up to
This recorder is
Use b / B to select [Init Setup] option then press
ENTER. Initial Setup Menu appears.
99 TV
channels.
Preparation:
Connect the recorder to the desired type of aerial,
as shown in "Connections to Your TV and Aerial" on
page 9.
3.
4.
5.
1.
Select the [Auto
2.
Press ENTER to
Scan] option.
Usev/V/b/Btoselectanoption.
Press ENTER to confirm your selection.
Press SETUP to exit the
Setup
begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them
the tuner's memory.
menu.
Notes:
Press b to go back to the previous level.
To return to the [DVD Recorder Initial Setup] menu,
select
[<] option
press ENTER.
12
on
the
[Initial Setup]
menu
then
3.
Press SETUP to exit the
Setup
menu.
in
Program
You
can
move,
1.
Edit
edit
a
channel
Manual
manually (add, delete,
name,
etc.).
Select
[Program Edit] option
on
the
[Initial Setup]
You
perform a search
channels manually.
1.
menu.
2.
3.
[Program Edit]
can
Select [Manual
to select and store TV
Setting] option
on
the
[Initial Setup]
menu.
Press ENTER.
The
Setting
2.
menu
appears.
Press ENTER.
The
Usev/V/b/BtoselectaPRnumberthen
press ENTER.
SHokupand et ings
[Manual Setting]
menu
appears.
[PR] Selects
a
[CH] Selects
the Channel number. Press AV to
select "S--"
or
PR number.
"C--". You
can use
number
buttons to select channel number.
Tune] Fine
clearer picture.
[CH
a
4.
CLEAR button: Deletes
a
program you do not
recorder tunes in
(up / down) buttons: Sorts the program
positions on the Program Edit menu. Press v / V
to move the selected program position to a new
REC (z) button: Edits the program.
While channel number is highlighted, press
v / V to set the channel manually.
To enter characters,
5.
see
page 39.
[Program Edit] menu, press ENTER
[OK] or [Cancel] is highlighted.
The Initial Setup Menu appears.
[OK] Exits with save the editing.
[Cancel] Exits without save the editing.
To exit
check
If there is not check mark, current channel
is memorized. If you want to delete the channel
from memory, press ENTER
so
check mark
appears.
3.
Enter the necessary information for date and time.
b / B (left/right) buttons: Changes the setting at
the current
while
so
[Skip]
highlighted,
press ENTER to changes the station name. The
display for entering characters appears.
channel.
broadcast is not clear, press ENTER
mark disappears.
location then press ENTER.
is
a
[Nicam] Check for the NICAM broadcast by
pressing ENTER. Normally, Check mark is
appears on the display. If the sound from NICAM
v / V
name
tunes the channel to obtain
[Manual Scan] Searches for a channel
automatically. Searching stops when the
need.
While channel station
Fine
cursor
v / V
(up/down)
previous or next
position.
buttons: Moves the
[Initial Setup]
to the
column.
ENTER button: Confirms the
the
cursor
setting
and returns to
menu.
STOP button: Exits the
menu.
13
Auto Install
Chapter
Re-configure initial settings.
Select [Auto Install] option on the [Initial Setup]
then press ENTER. [Initial Setup Wizard] menu
Chapter markers are put in specified setting. You can
change this interval to 5 minutes, 10 minutes or 15
minutes. If you select [Off], switch off automatic
chapter marking altogether with the [Off] setting.
menu
screen
appears.
See "Auto Set Up"
on
page 11.
Recording Setup
Record Mode Set
You
picture quality for recording;
HQ (High Quality), SQ (Standard Quality),
LQ (Low Quality), EQ (Extend Quality).
can
set the
Overwrite
To overwrite
video
recording on a previously
recorded title, set [Overwrite] option to [On]. This
feature is not available for DVD+Rs, that always
a new
record at the end of the disc.
14
Mark
General
TV
Last
Setup
This recorder memorizes the
settings for
Settings remain in
Display
Selects the aspect ratio of the connected TV.
[Pan Scan] Select when
a
standard 4:3 TV is
connected. The video material formatted in the Pan &
Scan
the
style
picture
Memory
back in that
is
played
are cut off).
style (Both
sides of
user
the last
disc that you have viewed.
memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically recalled. To
Memory] option to [On].
use
this effect, set
[Last
[Letter Box] Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
[Wide] Select when
a
SHokupand et ings
16:9 wide TV is connected.
Clock
1.
Setting
Select
[Clock Setting] option
on
the
[Initial Setup]
menu.
Angle
Mark
Some DVDs feature
filmed at different
angles,
which you can select using On-Screen Display. You
can have the recorder alert you when multiple angles
are available by displaying an Angle Mark icon on
scenes
screen.
[On] Displays
[Off] Angle
an
Angle
Mark icon
Mark icon is not
on screen.
displayed.
2.
Press ENTER.
3.
Enter the necessary information for date and time.
b / B (left/right): Moves the cursor to the previous
or
OSD
Select
(On-Screen Display) Language
a
display.
language
for the
Setup
menu
and
next column.
v / V
(up/down) or number buttons: Changes
setting at the current cursor position.
on-screen
4.
Press ENTER to confirm your
the
setting.
15
Video
SPDIF
Setup
-
Quality
Set video
quality
contrast, hue,
1.
or
in the
SPDIF
Setup
(Digital Audio) Output
Selects the
aspects of brightness,
signal type
[SPDIF RAW] Select
[Quality] option
Setup]
menu
then press B
on
the
[Initial
connected to
Dolby Digital,
connected to
Digital, DTS
Press v / V to select the desired
ENTER. The status bar appears.
option
the DIGITAL OUT
this when the recorder is
audio component without
DTS or MPEG decoder.
an
[SPDIF/PCM] Select
2.
using
jack.
saturation.
Select
when
built-in
this when the recorder is
audio component with
MPEG decoder.
an
or
a
a
built-in
Dolby
then press
Example: Brightness
-
LPCM Out
Selects the
3.
Press b / B to select the desired position then
press ENTER to confirm your setting.
sampling frequency
of the
digital
audio
signal.
[48K] The audio signals of
DVD VIDEOs
are
always
converted to 48 kHz/16 bit.
Audio
[96K] All types of signals, including
output in their original format.
Setup
Post DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned
down when
playing
a
DVD that conforms to
[Post
DRC].
[On]
Makes low sounds clear
even
if you turn the
volume down.
[Off] Normally
select this.
[Auto] Decreases Dynamic value automatically.
16
96 kHz/24 bit,
are
3D Surround
Dolby Digital
-
3D Surround effect, which
simulates multi-channel audio playback from two
This unit
Dual Mono
You
can
select
a
audio channel of
Dolby Digital.
[Stereo] The left channel sound (L) is heard from the
left speaker and the right channel sound (R) is heard
from the right speaker.
can
produce
a
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
To
use
a
this effect, set
or
home theater system.
[3D Surround] option
to
[On].
[L-Mono] The left channel sound (L) is heard from
both speakers.
[R-Mono] The right channel sound (R) is heard from
both speakers.
SHokupand et ings
[Mix-Mono] The mixed sound (both left and right
channel) is heard from both speakers.
-
Dynamic
setting optimizes the dynamics of the sound with
low volume playback for less disturbance in quiet
environments. This only works for Dolby Digital audio
This
on
DVD video discs.
1.
Select
2.
Press v / V to select the [Dynamic] option then
press ENTER. The status bar appears.
3.
Press v / V to select then press ENTER to tune
[Dolby Digital] option
[Initial Setup] menu
then press B
on
the
dynamic range compress.
The high of dynamic range
compress, the gap
between Treble and bass will be not Obvious.
17
Preference
TV
-
Selects the limitation level.
Type
You must select the
TV
?
Parental
appropriate
system mode for your
Rating one (1)
eight (8) is the
has the most restrictions and
rating
least restrictive.
system.
When the selected system does not coincide with
the system of your TV, normal color picture may not
be displayed.
[PAL] When this recorder is connected
[Auto] When this recorder is connected
system TV.
[NTSC]
with PAL-TV.
with Multi
When this recorder is connected with
NTSC-TV.
Note:
Password needs to
change the parental
[Password Mode] option is set to [On].
-
Area Code
Selects
a
code for
an area as
level. See "Area Code"
1.
Select [Parental
[Initial Setup]
Audio/Subtitle/Disc Menu
Select
language
a
level if
the
playback
limitation
(page 44).
Ctrl] option
then press B
on
the
menu
Language
for the disc's Menu, Audio, and
Subtitle.
[Original]
Refers to the
disc
recorded.
was
original language
in which the
language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 44).
[Others]
To select another
2.
Press v / V to select the [Area Code] option then
press ENTER. [Area Code] menu appears.
3.
Press v / V to enter the first character of the
area
and press B.
4.
Parent Control
Playback of some DVD VIDEOs can be limited
according to a predetermined level, such as the age
of the users. Scenes may be blocked or replaced with
different
scenes.
Select [Parental
18
Ctrl]
on
the setup
menu.
Press v / V to enter the second character and
press ENTER.
-
Password Mode
Activates
[On]
To
or
If you
disables the Parantal Control feature.
play
back
rated movies
a
or
to
change setting
Parental Control
options (Parantal, Area Code,
etc.), you must enter the 4-digit password.
[Off] Parental control is not active and the disc plays
an
in full.
forget your password
If you
forget your password, to clear the
password, follow the procedure below.
1. Press SETUP to
Setup]
display
the
current
[DVD Recorder Initial
menu.
2. Use the Number buttons to enter the
6-digit
number "210499". Confirm message will appear.
3. Select [Yes] then press ENTER. The 4-digit
password
is cleared. Enter
a new
code.
SHokupand et ings
Default
Select this to reset the recorder to all its default
The
remain
[Parental Control] settings
settings.
stored. [Initial Setup Wizard] menu screen
See "Auto Set Up" on page 11.
as
appears.
Note:
Password needs to
-
change
the
setting.
Password
Changes
1.
the
password
Select [Parental
[Initial Setup]
2.
for Parental Control features.
Ctrl] option
then press B
on
the
menu
Press v / V to select the
[Password] option then
press B.
3.
Press ENTER while
[Input Password]
4.
Enter old
[Change]
menu
is
highlighted.
appears.
four-digit password using
the number
buttons.
If you have not entered a password
Password] column is disabled.
5.
Enter
yet, [Old
four-digit password using the number
buttons. Enter the password again to confirm, and
press ENTER while [OK] is selected.
The password is stored.
new
19
Using
1.
3.
4.
5.
20
Operation
Press SETUP and the
Setup]
2.
the Disc
menu
menu
If you load a completely blank disc, The recorder will
erase the disc automatically.
[DVD Recorder Initial
appears.
Use b / B to select [Disc Oper] option then press
ENTER. Disc Operation Menu appears.
Use v / V to select
an
Disc Erase
Also, you
menu as
can erase
the DVD+RW from the
Setup
below.
1.
Select [Erase]
2.
Press ENTER.
3.
Use b / B to select [OK] then press ENTER.
It takes a few moments to erase the disc.
option
on
the
[Disc Oper]
menu.
option.
[Erase]
menu
appears.
Press ENTER to confirm your selection.
To exit the menu, press SETUP or select [<
option on the [Disc Oper] menu then press
ENTER.
Exit]
Caution
If you want to erase the disc,
on the disc will be erased.
everything
recorded
Finalize
Disc Protect
'fixes' the DVD+R
recordings in place so
that the disc can be played on a regular DVD player
or computer equipped with a suitable DVD-ROM
Use the
drive.
1.
Finalizing
Finalizing
a
disc creates
a menu screen
the disc. This is accessed
for
[Protect] option to prevent accidental
recording, editing or deleting of the disc loaded.
Select [Protect]
option
on
the
[Disc Oper]
menu.
navigating
by pressing MENU/LIST
or
TITLE.
Caution
SHokupand et ings
Once you have finalized a DVD+R disc, you cannot
edit or record anything else on that disc.
[Fi
t
li
]
ti
th
O
[Di
]
1.Sl
menu.
ENTER
Press
2.
[Finalize]
menu
2.
Press ENTER.
3.
Select
[Protect]
menu
appears.
then press ENTER.
The disc is protected. So you cannot record,
erase, and edit.
[OK]
If you need to unlock the disc to make edits, select
[Unprotect] on the [Disc Oper] menu.
appears.
Make Edits
Compatible
Use the
Select
[Make Comp] option when the current
DVD+RW is not compatible with other DVD Players
then press ENTER.
The recorder starts finalizing the disc.
3.
[OK]
because you have added
Note:
How
long
recorded
1.
finalization takes
on
depends
on
how much is
the disc, and the number of titles
on
Select [Make
Chapter
Comp] option
on
Markers.
the
[Disc Oper]
menu.
the
disc.
Tip
If
[Protect] option is
set to
active, the finalize is not
available. To finalize, set the disc to
[Unprotect].
2.
Press ENTER.
3.
Select
[OK]
[Make Comp]
menu
appears.
then press ENTER.
21
Adapt
Disc recorded
recorder. You
on
other recorder will not
can use
the disc after
use on
adapting
your
the disc
at your recorder.
1.
Select
2.
Press ENTER.
3.
Select
[Adapt] option
[OK]
on
[Adapt]
the
[Disc Oper]
menu
menu.
appears.
then press ENTER.
Disc Information
You
can
view the informations for loaded DVD+R/RW
disc.
(Disc Label, Media,
Remaining time)
1.
Select [Disc Info]
2.
Press ENTER.
3.
To return to the
RETURN,
22
or
Title number, Status,
option
the
[Disc Oper]
menu
appears.
on
[Disc Info]
[Disc Oper]
ENTER.
menu, press
menu.
SETUP,
General
Explanation
On-Screen Display
This manual
of
The On-Screen
operating the
recorder. Some DVDs require specific operation or
allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
recorder
or
gives
basic instructions for
is not available
on
the disc.
features. To
Information While
Watching
During viewing the TV, press DISPLAY to
display/remove the information displayed
on-screen.
Indicates channel number, station name, and
audio signal (STEREO, MONO) received by
TV
Display
contains many playback
the On-Screen Display, press
Display
see
DISPLAY while
a
disc is
playing.
The On-Screen
appears across the top of the screen. Each
feature is illustrated with an icon. Use the
Display
v / V / b / B buttons to move
icons in the
through
On-Screen Display.
the different
highlighted, use the v / V buttons to
through the choices displayed in the text box
When
Displaying
the On-Screen
Using
an
scroll
icon is
SHokupand et ings
under the icons.
The On-Screen
the disc
was
Display
only available if
particular feature (i.e.,
features
created with that
are
if
you select the Subtitle icon, you won't be able to
change the subtitle language unless the author of the
disc created the disc with
subtitles).You
display
can
various information about the disc loaded
on-screen.
the tuner.
For details about each item,
see
the pages in
parentheses.
DVD
:Title number
Indicates current date and time.
(Current / Total) (page 24)
number
(Current / Total) (page 24)
:
Chapter
:
Elapsed playing
time of title
:
Audio
and
:
Subtitle number
:
Angle
:
Repeat
:
A-B
:
Sound effect mode
:
On-Screen
VCD
encoding
number
mode
(page 25)
language (page 26)
(page 26)
(Current / Total) (page 26)
(page 25)
repeat mode (page 25)
(page 27)
Display language
ACD
:Track number
(Current / Total) (page 24)
:
Elapsed playing
:
Audio channel
:
PBC mode
:
Repeat
:
A-B
:
Edit program
time of track
(page 25)
(page 26)
(Video CD only) (page 24)
mode
(page 25)
repeat mode (page 25)
playback (Audio CD only)
(page 27)
Playback (Audio CD only) (page 25)
:
Random
:
On-Screen
Display language
23
To view TV channel
input source during
Audio CD playback, press STOP (x).
Unless stated otherwise, all operations described
Playback
Playing
a
video
DVD, Video CD,
or
the remote control. Some features may also be
available on the Setup menu.
use
or
Audio CD
On and off the PBC function
Playback Setup
Turn the TV
1.
on
and select the video
input
PBC stands for
source
menus
Audio system: Turn the audio system on and select
the input source connected to the recorder.
some
Load your chosen disc in the tray, with the
playback side down.
If a
The
is displayed
may be displayed first after loading
menu screen
or
Video CD which contains
2.
Pressv/VtosetthePBCmodeto[On]or[Off].
are
played according
are
played
to the
PBC,
if available.
a
[Off]
a menu.
Video CDs
the
same
way
as
Audio
CDs.
or
MENU/LIST to return to the
Moving
When
menu
to another TITLE
Use the number buttons to select the track you want
to view.
Press RETURN
(O)
to return to the menu screen.
Menu
setting and the exact operating procedures
using the menu may differ depending on the
disc. Follow the instructions
on
the each
You may also set PBC to OFF
Screen Display. See page 24.
screen.
menu
on
the On-
briefly.
(from the
scene point). If you press STOP (x) again or
unload the disc ("x" appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE
Press OPEN/CLOSE
(Z)
(Z)
to remove the disc.
to close disc
tray
or
press POWER (1), the disc tray closes
automatically and unit turns off.
one
title, you
can move
to
follows:
as
Press DISPLAY
then use b / B to
select the title icon then press ENTER.
2.
Press the
during playback
numbered button
appropriate
(0-9)
or
v / V to select a title number.
Tip:
also select title in stop mode. Press DISPLAY
twice and title icon appears. Use number button to
You
can
select
a
title number then press ENTER. The title's
starts.
Moving
When
a
disc has
another
to another CHAPTER/TRACK
title
on a
more
disc has
than
Press SKIP .
than
track, you
one
chapter/track
more
as
one
chapter
can move
or a
to
follows:
>
briefly during playback
select the next chapter/track or to return to the
beginning of the current chapter/track.
or
briefly
to
step back
to
to the
previous chapter/track.
If Parental Control is set and the disc is not within
the
than
Press SKIP . twice
Notes:
Rating settings (not authorized),
more
1.
on
the disc. "Xx" appears on the screen
Press PLAY (N) to resume playback
4-digit
code must be entered and/or the disc must be
authorized
disc has
playback
To stop the playback, press STOP (x).
The unit records the stopped point, depending
the
a
another title
screen.
for
Video CDs
playback.
Press TITLE
(see "Parental", on page 18).
DVDs may have a Region Code.
Your recorder will not play discs that have a region
code different from your recorder. The region code
for this recorder is 3 (three).
24
Press DISPLAY and press b / B to select the PBC
icon.
[On]
Usetheb/B/v/Vbuttonstoselectthe
title/chapter you want to view, then press ENTER to
start
Video CDs.
1.
menu screen
DVD
2.
and
connected to the recorder.
Playback Control and refers to special
navigation features that are available on
To go
directly to any chapter/chapter during
playback, press DISPLAY and press b / B to select
the chapter/track icon. Then, input the chapter/track
numberorusev/V.
Search
1.
Press SCAN
2.
Press SCAN
(m
M) during playback.
or
to select the
(m
M) repeatedly
required speed.
DVD; 5 steps (forward and backward)
Video CD, Audio CD; 3 steps (forward
backward)
or
Still Picture and
To repeat
a
1.
and
3.
Frame-by-Frame
Press A-B at your chosen
appears briefly on the TV
Advance
(X) during playback.
the picture frame-by-frame by pressing
PAUSE/STEP (X) repeatedly.
1.
Press A-B
2.
press PLAY
(N)
or
press
Press PAUSE/STEP (X) during playback.
The recorder will now go into PAUSE mode.
(m
or
M)
to select the
required
speed.
DVD; 4 steps (forward and backward)
Video CD; 3 steps (forward only)
To exit Slow Motion mode, press PLAY
On
Press REPEAT to select
Press b / B to select the time Time icon
start time in
required
hours, minutes, and
right.
starts from the selected time.
Video CD with PBC, you must set PBC to OFF
the On-Screen Display to use the Repeat function.
a
Press ZOOM
a
during playback
still
or
playback
to
Each press of the ZOOM button changes the TV
screen in the sequence shown below.
x2 size
→
x4 size
→
normal size
2.
Usetheb/B/v/Vbuttonstomovethroughthe
zoomed picture.
3.
To
desired repeat mode.
Video CD with PBC, you must set PBC to OFF
the On-Screen Display to use the Repeat function.
See page 24.
the
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
(N).
Note:
on
Input
activate the Zoom function.
[CH] repeats the current chapter. (DVD)
[TT] repeats the current title. (DVD)
[ALL] repeats the all tracks. (Video CD, Audio CD)
[Track]: repeats the current track. (Video CD, Audio
CD)
[Off] does not play repeatedly.
a
The Time icon
Zoom
1.
Repeat
On
during playback.
elapsed playing time.
See page 24.
Slow Motion
3.
at any chosen time on the disc:
Note:
on
Use the SCAN
playing
Playback
(X) during playback.
playback,
PAUSE/STEP (X) again.
2.
to cancel.
seconds from left to
To return to
1.
again
the
and "0:00:00" appears.
Pause
2.
screen.
Press DISPLAY
3.
Press PAUSE/STEP
-"
again at your chosen end point.
"A-B" appears briefly on the TV screen and
repeat sequence begins.
shows the
To exit still motion mode, press PLAY.
1.
starting point.
"A
Press A-B
To start
Press PAUSE/STEP
2.
sequence.
Time Search
Playback
1.
A-B
2.
To exit SEARCH mode, press PLAY.
3.
Repeat
resume
repeatedly
playback, press ZOOM
the normal picture appears.
normal
until
Note:
The
zoom
function may not work for
some
DVDs.
Random
1.
Press DISPLAY and press b / B to select the
Random icon.
2.
Use v / V to select
ENTER.
[On]
or
[Off]
then press
[On] The unit automatically begins
Playback.
[Off]
To return to normal
Random
playback.
Tip:
By pressing SKIP
>
during
Random
playback,
unit selects another track and
resumes
Random
the
playback.
25
Marker Search
To enter
You
a
DVD
Camera
VCD
from up to 12 memorized
marker, press MARKER at the
desired
point
the TV
screen
a
on
the disc. The Marker icon appears
briefly. Repeat
1.
2.
Clear
or
During
disc
search
menu
on
Useb/B/v/Vtoselectamarkedscenethat
marked
scene
4.
scene.
clear.
playback
Press DISPLAY and press b / B to select the
Angle icon.
2.
Use v / V to select
a
desired
starts from the
The ANGLE indicator will blink
scenes
is erased from the marker search
menu.
recorded at different
angle switching
angle.
DVD
the TV
angles
screen
at
to indicate that
possible.
+RW
+R
Press AUDIO
different
menu.
is
on
the Audio Soundtrack
Changing
Or, press CLEAR and the marked
Press RETURN to exit the
to a different camera
Tip:
press SEARCH. The marker
appears on the screen.
Press ENTER and
recorded at different
1.
to enter up to 12
playback,
or
scenes
angles, you can change
angle during playback.
Marked Scene
a
you want to recall
3.
DVD
camera
markers.
To Recall
Angle
If the disc contains
playback
To enter
points.
+R
Marker
start
can
+RW
repeatedly during playback to hear
audio language or audio soundtrack if
a
available.
Note:
Some discs feature both
soundtracks. There is
no
Dolby Digital and DTS
analog audio output when
DTS is selected. To listen to the DTS soundtrack,
connect this recorder to a DTS decoder via one of the
digital outputs. See
the Audio Channel
Changing
Press AUDIO
the Contents of DVD
Checking
Video Discs: Menus
Title Menu
Note:
appear
menu
2.
The
the TV
on
a menu,
screen.
the
menu
will
Otherwise, the disc
may not appear.
may contain camera angles, spoken
and subtitle options, and chapters for the
menu
language
title.
Disc Menu
1.
Press MENU/LIST.
The disc
2.
DVD
To
menu
remove
again.
is
displayed.
the disc menu, press MENU/LIST
ACD
to hear a
DVD
repeatedly during playback
subtitle languages.
Skip
+RW
+R
Each press INSTANT SKIP
If
Press TITLE.
If the current title has
26
the different
Instant
1.
repeatedly during playback
Press SUBTITLE
buttontoselectanoption.Or,usetheb/B/v/V
buttons to highlight your selection, then press ENTER.
DVD
VCD
different audio channel.
Subtitles
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number
page 9 for connection details.
to see
DVD
skips
forward 30 seconds.
appears, the feature is not available
on
the disc.
Last Condition
Memory
This recorder memorizes the
Using
DVD
settings
Settings remain
user
for the last
in memory
disc that you have viewed.
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically
recalled.
To
are
is set to
[On]
Press DISPLAY and press b / B to select the
Program icon.
2.
Press and ENTER and the
Program
screen
Sound Effect
+RW
+R
commencing
DVD
Usethenumberandv/V/b/Bbuttonstoenter
the track number.
on
if you switch off the recorder before
play it.
can
Program Playback option,
1.
3.
stored in memory for use any time.
stored in memory only when [Last
the setup menu.
This recorder does not memorize settings of a disc
You
use
appears.
Settings
--Settings are
Memory] option
--
the
Feature ACD
Program Play
you must enter
the order in which you want the tracks on the Audio
CD to play by creating a program.
Notes:
--
the
4.
Continue
adding
tracks
until your program is
explained
complete.
as
in
steps 3
to
VCD
choose among 7 sound mode.
1.
Press DISPLAY and press b / B to select the
Sound Mode icon.
2.
Use v / V to select
press ENTER.
a
Playbck
desired sound mode then
Use CLEAR button to delete the track number.
Use SKIP
previous
5.
You
and
or
play
pressing
can
(.
or
>)
button to
move
to
next page.
your program
ENTER.
by highlighting Play
Note:
The program will be erased when you stop the
playback, remove the disc from the recorder or the
recorder is turned off.
27
Playing
About MP3 audio files
MP3 File
an
The recorder
can
CD-R/RW
DVD±R/RW discs. Before
or
play
MP3 files
on
files, read "About MP3 audio files"
1.
Load
a
CD-ROM,
on
MP3 file
playing
the right.
MP3
menu
appears
on
the TV
Bit rate: within 8
screen.
with this recorder is limited
follows:
Sampling frequency:
disc that contains MP3 files.
The Browser
as
compatibility
-
within 8
extension other than
physical
48 kHz
320kbps
The recorder cannot read
CD-R
-
MP3 file that has
an
".mp3"
a
file
.
format should be "ISO 9660" and
"JOLIET".
If you record MP3 files using software that cannot
create a file system (eg. Direct-CD) it is impossible
playback MP3 files. We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
to
system.
2.
3.
4.
On the [Browser] menu, use v / V and ENTER to
open a folder contains MP3 files. The file and sub
File
names
should have
folder list for the folder appears. To disappears
MP3 files and sub folders, select the folder then
incorporate
They
should not contain
press ENTER
*:"<>letc.
again.
Press v / V to select an MP3 file then press
ENTER. Playback starts.
To stop
playback
at any
special
letters such
The total number of folders and files
on
as
/ ?
the disc
should be less than 4,500 and the total number of
files in a folder should be less than 500.
time, press STOP.
This recorder
requires
discs and
recordings
to meet
certain technical standards in order to achieve
Tips:
You
maximum of 8 letters and
.mp3 extension.
must
an
a
can
Press b
select
an
MP3 file
repeatedly
to
the
[File list]
select [File list] word
on
menu.
on
top
then press ENTER and the all files
except folders will display.
of the
menu
playback quality.
Pre-recorded DVDs
are
optimal
automatically
set to these standards. There are many different
types
(including CD-R containing
MP3 files) and these require certain pre-existing
conditions (see above) to ensure compatible playback.
of recordable disc formats
Customers should note that
required
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
To view the TV program and exit the menu, press
STOP repeatedly. To return to the [Browser] menu,
press MENU/LIST.
To show other pages, press SKIP . or >
briefly in stop mode (when "x" appears on the
menu.)
28
sought
from the
copyright
owner.
Viewing
a
To Pause the Slide Show
JPEG File
1. Press PAUSE/STEP
play JPEG files on the CD-R/RW
DVD±R/RW. Before playing JPEG recordings, read
"About JPEG image files" on page 30.
The recorder
1.
Load
The
a
can
or
menu
appears
on
the TV
2. When you want to continue slide
PLAY
screen.
While
once
(N)
PAUSE/STEP
or
a
file.
Rotate
Images
To
On the [Browser] menu, use v / V and ENTER to
open a folder contains JPEG files. The file and sub
folder list for the folder appears. To disappears
JPEG files and sub folders, select the folder then
3.
4.
again.
[Browser]
menu
flip
or
viewing
a
picture
to
flip
the
picture
to
flip
the
counterclockwise.
the
picture
Press v / V
during showing a picture
picture horizontally or a vertically.
Playbck
Still Picture
1.
Press v / V to select a JPEG file then press
ENTER. Slide Show starts.
To return to the
(X).
picture,
previous
clockwise
press ENTER
show, press
press SKIP (.or >)
to advance to the next file or return to the
viewing
Use b / B while
2.
slide show.
Skip Images
disc that contains JPEG file.
[Browser]
(X) during
Press PAUSE/STEP
The recorder will
2.
during Slide
during
now
slide show.
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
press
Show, press MENU/LIST.
Zoom
Tips:
You
can
Press b
select
an
JPEG file
repeatedly
to
the
[File list]
select [File list] word on top
on
menu.
then press ENTER and the all files
except folders will display.
of the
menu
1.
Press ZOOM
during viewing picture.
The recorder will
2.
Press SCAN
in
or zoom
now
go into ZOOM mode.
(m or M) in ZOOM mode to
out. (50%, 100%, 150%, 200%)
zoom
To view the TV program and exit the menu, press
STOP repeatedly. To return to the [Browser] menu,
press MENU/LIST.
To show other pages, press SKIP . or >
briefly in stop mode (when "x" appears on the
menu.)
29
Using
the thumbnail
Erasing
for
menu
a
file from the
Select the file you wish to
JPEG file
1.
If you press STOP during Slide Show, the thumbnail
menu will appear. You can find a picture you want to
2.
Repeat step
3.
Press b
view
[Playlist]
erase
menu
then press
MARKER.
easily.
1 to mark additional file.
repeatedly
to select
[Delete] word
then press ENTER.
The marked file(s) is erased from the
[Playlist]
Usev/V/b/Btoselectapictureoroptionicon
then press ENTER.
menu
all file from the
Erasing
Press b
repeatedly
[Playlist]
menu
All files
[Playlist]
to select
menu.
menu
[Delete All] word
on
the
are
then press ENTER.
erased from the menu.
About JPEG
JPEG disc
limited
the
on
image
compatibility
files
with this recorder is
follows:
as
upon the size and number of JPEG files,
it could take a long time for the recorder to read the
Depending
12
1.
Starts the Slide Show from the
3.
Shows the [Remote Key Function]
Shows the previous page.
Shows the next page.
Using Playlist
files. If you don't
several minutes,
---
Starts the Slide Show
5.
5
picture.
2.
4.
4
3
.
with MP3
or
JPEG
enables you to make custom playlists of MP3
JPEG files. Playlist can contain up to 256 files.
On the [Browser] or [File list] menu, select a file
then press MARKER to add the file to the [Playlist]
menu.
Press CLEAR
again
to cancel the checked
file.
Repeat step
3.
Press b
4.
30
1 to mark additional file.
repeatedly
menu
menu
will appear.
file
[Playlist]
word
on
the
on
top
[Playlist]
[Playlist] menu then press
ENTER and playback begins in the order in which
you programmed.
a
the disc
a
different
Ensure that all the selected files have the
extensions when
copying
into the
".jpg"
CD layout.
If the files have
rename
File
them
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
names
".jpg"
extension will not be able
to be read
by
this recorder. Even
shown
as
JPEG
image
though
the files
files in Windows
Explorer.
then press ENTER and the
of the
Select
to select
on
Some discs may be incompatible due to
recording format or the condition of disc.
are
2.
pixels.
should be less than 4,500 and the total number of
files in a folder should be less than 500.
Playlist
1.
after
some
The total number of folders and files
files
or
display
of the files may be too large
reduce the resolution of the JPEG files to less
than 4M
menu.
see an on-screen
Progressive
and lossless
files
supported.
are
not
compression JPEG image
Notes for
Recording
About DVD
The
Notes:
This recorder cannot make
recordings
on
CD-R
or
CD-RW discs.
Our company takes no responsibility for recording
failure due to power outages, defective discs, or
damage to the Recorder.
Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Disc types and
and settings
care
of your discs.
recording formats, modes,
play three different kinds of DVD
pre-recorded DVD-Video discs, DVD+RW, and
This recorder
discs:
can
DVD+R discs. The DVD+R and DVD+RW discs
always
"Video format"---the
DVD-Video discs. This
DVD+RW
that
time and
four preset
are
pre-recorded
once
compatible, you can play
in a regular DVD player.
Recording
There
same as
means
make edits
a
finalized
DVD+R,
or
or
times shown
uses
are
not exact because
variable bit-rate video
compression. This means that the exact recording
time will depend on the material being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the
recording times may be shorter.
If you record still pictures or audio only, the
recording time may be longer.
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
The recording time available may decrease if you
heavily edit a disc.
When using a DVD+R disc, you can keep recording
until the disc is full, or until you finalize the disc.
Before you start a recording session, check the
amount of
recording time
Delete Title option in
left
The
the Title List
on
the disc.
available
(except
DVD+RW disc).
depend
picture quality
for the last recorded title
on
the
source.
record NTSC and PAL
modes:
menu
only
hides the title, it does not actually erase the title
from the disc and increase the recording time
This recorder records with NTSC
recording quality
HQ
Highest quality setting, gives about 1 hour of
recording time on a DVD (4.7GB).
Default quality, sufficient for most applications,
SQ
gives about 2 hours of recording time on a DVD
(4.7GB).
LQ
Slightly lower video quality, gives about 4 hour
of recording time on a DVD disc (4.7GB).
Lowest video quality, gives about 6 hour of
EQ
recording time on a DVD (4.7GB).
are
recording
the recorder
recording
Please take proper
recording
or
PAL
on a
signal
But the recorder cannot
signals
on a
DVD disc
simultaneously.
--
--
--
--
Copyright
?
?
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
This
product incorporates copyright protection
technology that is protected by method claims
of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
31
Basic
from
Recording
TV program.
and continues until the
Follow the instructions below to record
Recording
starts
disc is full
or
OTR
TV
a
a
immediately
you stop the recording.
Set
1.
recordable disc for DVD
a
mode
recording.
recording
necessary by pressing
REC MODE repeatedly. (HQ, SQ, LQ, EQ)
a
Use PR
2.
(v
/
V)
as
buttons to select the TV channel to
record.
Changing TV Audio Channel
You
select the audio channel
(language) to
by pressing AUDIO during viewing TV program.
current audio channel is displayed on-screen.
can
Mono/Main
→
Stereo/Main
→
listen
The
Stereo/Sub
record either NICAM
can
audio. If the NICAM
setting (page 13)
then if the broadcast is
regular
set to [On],
or
is
NICAM, the audio
a
the
Press REC
time
as
shown left
(z) repeatedly
(Basic Recording
to select the
recording
length.
Recording starts after the first press. Each
subsequent press increases the recording time
within free space.
The recording time is
At the end of the
recording
displayed
recording, the
on
the TV
screen.
recorder will stop
and shut off.
the
Recording
Time
Press DISPLAY to check the
recalled
screen
setting
for
a
will
recording time. The
automatically return to the TV
moment.
Also, remaining time of recording is shown in the
display
window.
Recording
Time
If NICAM sound distortion occurs, due to poor
reception, you can switch off NICAM setting of the
recording time can be extended anytime by
pressing REC (z).
Each subsequent press increases the recording time
program.
within free space.
Press REC (z) once.
Recording will start. (The REC appears in the
Time
Press STOP
Caution
If the recorder is
length of time,
Recording) on right.
a
(x)
To Pause the
32
2.
The
(One
2.
Follow steps 1-3
from a TV).
NICAM, the regular audio is always recorded.
To record for
1.
1.
To Extend the
display window.)
4.
(One Time Recording) allows you to make
recording easily of a preset length without using
to NICAM and you can
record the NICAM audio. If the broadcast is non-
automatically changes
3.
OTR
Checking
If the sound is poor quality when set to Stereo, you
can often improve it by changing to [Mono/Main].
This recorder
Recording)
program timer.
Note:
You must load
Time
(One
fixed
to
see
OTR
stop recording.
Recording
Press PAUSE/STEP
(X)
to pause
recording.
When you want to continue recording, press
PAUSE/STEP (X) or REC (z).
failure)
while the
will be lost.
unplugged (or there is a power
recorder is recording, the recording
Timer
4.
Recording
This recorder
can
be
programmed to
period of 1 month.
record up to 7
For unattended
To check the
programs within a
recording, the timer needs to know the channels to be
list
[Timer Recording] list
screen
will appear.
the
[Timer Recording]
will appear.
field's [Valid] on the
[Timer Recording] list
screen indicates that the timer recording is
programmed correctly.
Press TIMER REC.
The
programming,
by
screen
[Result]
recorded, the starting and ending time.
1.
Press ENTER, the program will be memorized
the recorder.
5.
Press TIMER REC to exit the Timer
6.
Make
sure
that you load
a
Recording
list.
recordable DVD disc for
recording.
2.
Select [New Input] then press ENTER.
The Timer Record menu will appear.
[Date] Choose
date up to 1 month in advance.
a
[Start] Set
the start time.
[Stop] Set
the stop time.
[Input] Choose
or one
Recording
memorized program number,
of the external inputs from which to
a
record.
[Repeat] Choose a desired repeat (Once,
Daily, Monday-Friday, or Weekly).
[Mode] Set
a
recording
mode.
(HQ, SQ, LQ,
EQ)
[Title] Edits the title name. Press REC (z) to
changes the title name. The display for entering
characters appears. To enter characters,
page 39.
3.
see
Enter the necessary information for your timer
recording(s).
b / B
(left/right) move the cursor left/right
v / V (up/down) or number buttons
change
the setting at the current cursor position
Press ENTER after filling in all the program
--
--
information.
Press TIMER REC to exit the Timer Record
menu.
33
Checking
Timer
If two or more timer programs overlap:
The earlier program takes priority.
Recording
Details
When the earlier program finishes, the later
Programming
is turned
can
program starts.
If two programs
be checked whenever the recorder
Press TIMER REC.
on.
Use v / V to select
timer
a
are
time, the program entered first
recording.
exactly the
takes priority.
set to start at
same
If the disc is
Press ENTER to edit the selected program.
Timer Record menu appears.
Press CLEAR to delete the selected program
from the Timer Record List.
damaged, the recording may not
complete successfully. In this case even though
[Result] field shows [Valid], it may not be.
Recording
Input
an
from External
Recording
You
from
External
Components
external component, such
a camcorder or VCR, connected to any of the
recorder's external inputs.
1.
Canceling
You
can
a
clear
Timer
a
timer
recording actually
Recording
setting anytime
Use v / V to select
1.
2.
program you want to
the Timer Recording list.
on
a
2.
Press CLEAR.
3.
Confirm message appears.
Select [Yes] then press ENTER.
Stopping
After
a
timer
Recording
recording
in
Even
Press AV
on rear
no
Progress
has started, you
can
3.
still
4.
Press REC
IN1(L/R)
mounted
or
timer program when:
recording is already underway.
The time you're trying to set has already passed.
There are already 7 timer programs set.
appears in the
continues until you press STOP
the disc is full.
(One
5.
(x)
length of time, see "OTR
Recording)" on page 32.
Time
Press STOP
a
(x)
fixed
to
stop recording.
Note:
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See
Copyright
or
once.
Recording
disc loaded.
[Protect] option is set to [ON] in the Setup menu.
(see page 21).
There are already 49 titles recorded on the disc.
34
(z)
Recording will start. (The REC
display window.)
A non-recordable disc is loaded.
A
to
panel.
To record for
a
input
(VIDEO, AUDIO (L/R), SVIDEO) mounted on front panel
Select the recording mode as necessary by
pressing REC MODE repeatedly. (HQ, SQ, LQ,
EQ)
the timer is set, the recorder will not
You cannot enter
to select the external
Front AV: INPUT 2
record when:
There is
repeatedly
Tuner: Built-in tuner
Recording Troubleshooting
though
that the component you want to record
from is connected properly to the recorder. See
record from.
erase
cancel the program.
Press STOP.
Timer
as
sure
Rear AV: VIDEO IN1, AUDIO
Timer
a
Make
an
page 10.
before the
starts.
can
record from
the
on
page 31 for
more
details.
a
Editing
You
or
can
edit video content
[Disc Edit]
To
use
To
use
using [Title List]
menu
menu.
Title List menu, see pages 35-38.
Disc Edit menu, see pages 39-42.
Title List and
Chapter
List Menu
Overview
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD.
1.
Playback
should be
selecting titles, use the v / V buttons to
display the previous/next page if there are more
When
screen are
the
menu
options.
menu
for
changing
b
Thumbnail
c
Shows the title name, recorded date, and
recording length and recording mode.
d
Shows the current page number.
than three titles.
On the left side of the
options: To display menu option, select a
title or chapter then press ENTER. The options
displayed differ depending on the disc type.
[Add] Displays menu for adding the chapter.
[Chapter] Displays Chapter List of the title.
[Delete] Deletes the title or chapter mark. (page
36 or page 38)
[Divide] Divides a title into two (page 37).
[Hide (Unhide)] Hides (or Unhides) the selected
chapter. (page 38)
[Play] Plays back the selected title or chapter.
The hidden chapters cannot be played.
[Rename] Edits the title name. (page 36)
[Title] Displays Title List of the chapter.
[Thumbnail] Displays
thumbnail (page 37)
Press MENU/LIST to
display the Title List menu.
stopped when you do this.
Menu
th
The main part of the screen shows thumbnails of the
titles (or chapter) on the DVD. You can change these
thumbnails---see
37
or
Changing
Title Thumbnails
on
page
page 40.
After
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu.
Use v / V to select a option then press ENTER to
confirm your selection.
2.
To exit the Title List menu, press STOP
(x).
Edit ng
ab
Title List
cdab
menu
Chapter
d
List
menu
35
Deleting
a
2.
Title
If you choose to delete a title from the Title List menu,
the title is actually deleted from the disc.
1.
Use v/V to select
ENTER.
Keyboard
menu
[Rename] option then press
appears.
Useb/B/v/Vtochooseatitleyouwantto
delete
The
then press ENTER.
appears on the left side of the
the Title List
on
options
menu
menu
screen.
Select [Delete] option from the
menu. Delete options appears.
2.
options
on
the
3.
Enteranameforthetitle.Useb/B/v/Vto
select a character then press ENTER to confirm
your selection.
Tip:
Remote control buttons for
Select
option then press ENTER.
The title(s) is deleted.
After pressing ENTER, the new, updated
displayed.
3.
an
menu
is
[Erase selected title(s)] Deletes the selected title
only.
[Erase all titles] Deletes all titles
[Cancel]
4.
Returns to
Repeat steps
1
-
previous
on
the disc.
3 to continue to delete from the
Press STOP to exit the
more
name
than two titles
are
is
are
combined into
Naming
a
can name
changed to [EMPTY].
repeatedly deleted, the
one.
characters
menu
menu.
36
long
on
Title
independently. Names can
long but it displays up to 15
on
be up
the Title List.
Choose the title you want to
menu, then press ENTER.
The
[Cancel] then press ENTER to return to
the previous menu screen without saving.
Choose [Reset] then press ENTER to delete all
options
appears
different recorder, you will
limited character set.
For discs formatted
see
only
a
The entered
titles
to 32 characters
1.
name
menu.
When you are deleting a title, only the last one
DVD+RW increases remaining recording time.
You
then press ENTER to fix the
and return to the previous menu screen.
[OK]
Notes:
The deleted title's
titles
Choose
characters.
Notes:
If
4.
Choose
menu.
menu.
5.
entering a name
SKIP (. / >): Changes keyboard type
SCAN (m): Deletes the previous character at
the cursor position.
b / B: Moves cursor to left or right.
Numbers (0-9): Inputs Digit at the cursor
position.
name on
on
the Title List
the left side of the
only
name
on a
is
after finalization
displayed on the DVD player
or making compatible.
Changing
Title Thumbnails
Divide One Titles Into Two
You
favorite
Use this command to
can
picture
1.
select
a
scene
shown in the Title List
for the thumbnail
menu.
1.
Useb/B/v/VtochooseatitleontheTitleList
menu then press ENTER.
The
options
menu
appears
on
screen.
2.
3.
Select [Thumbnail] from the
Press ENTER. The
menu
a
title up into two
On the Title List menu, select
divide then press ENTER.
The
the left side of the
split
menu
options
appears
on
a
+RW
new
titles.
title you want to
the left side of the
screen.
2.
Select [Divide]
3.
Press ENTER. The
option.
options.
appears
as
shown
menu
appears
as
shown
below.
below.
4.
Use
play,
find the
5.
pause step, search and slow-motion to
scene
displayed picture
one
that appears in the Title
menu.
The still
List
the
currently
picture
menu.
that you choose appears in Title
Use
find
you want.
Press THUMBNAIL to make the
List
4.
5.
play, pause step, search and slow-motion
the point you want to divide the title.
Press REC
(z)
at the
to
point.
The title is divided into two
new
Edit ng
titles. It take up to
4 minutes to divide.
Note:
You cannot select
dividing point
less than 3 seconds.
37
Adding Chapter
You
can
chapter
1.
create
chapters
Markers
within
marks at the desired
a
title
by inserting
points.
You
1.
Useb/B/v/Vtochooseachapteronthe
Chapter List menu then press ENTER.
The menu options appears on the left side of the
screen.
2.
Select [Add] from the
Markers
Deleting Chapter
can
delete
chapter
markers.
Useb/B/v/Vtochooseachapteronthe
Chapter List menu then press ENTER.
The menu options appears on the left side of the
screen.
2.
Select [Delete] from the
3.
Press ENTER.
options.
options.
The confirm message for
3.
Press ENTER. The
menu
appears
as
shown
will appear.
Use b / B to select
4.
below.
deleting
The selected
[OK] then press ENTER.
chapter mark is deleted.
Hide
a
You
skip playing chapters
can
Chapter
+RW
+R
without
deleting
from
the disc.
1.
Use vVbBto choose
hide
on
Options
4.
Use
play,
find the
2.
Select [Hide] from the
3.
Press ENTER.
chapter
options.
pause step, search and slow-motion to
scene
you want.
5.
Press CHP. ADD to add
6.
Repeat step
the
you want to
Chapter List menu, then press ENTER.
appear on the left side of the screen.
a
chapter
mark.
4-5 to continue to add
chapter
from
menu.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see "Chapter Mark" on page 14).
Note:
If you select
chapter on the Chapter List
menu, you can 'unhide' it by choosing [Unhide] option
on the menu. After doing that, you are able to play
back the chapter.
38
a
hidden
Using
1.
Press SETUP and the
Setup]
2.
the Disc Edit
menu
[DVD
Naming
menu
You
Recorder Initial
a
Title
can name
titles
to 32 characters
appears.
Use b / B to select [Disc Edit] option then press
ENTER. Disc Edit Menu appears.
1.
independently.
long.
Choose the title you want to
menu, then press ENTER.
The
options
menu
appears
Names
name on
on
the
can
the
right
be up
[Edit]
side of the
menu.
3.
Use v / V to select
The
menu
options
title then press ENTER.
appears on the right side of the
a
menu.
2.
Use v/V to select
ENTER.
Keyboard
4.
Select
an
option
menu
[Label] option then press
appears.
then press ENTER to confirm
your selection.
3.
Enteranameforthetitle.Useb/B/v/Vto
select a character then press ENTER to confirm
your selection.
Tip:
Edit ng
Remote control buttons for
[Label] Edits the title
name.
(See
page
entering a name
SKIP (. / >): Changes keyboard type
SCAN (m): Deletes the previous character at
the cursor position.
b / B: Moves cursor to left or right.
Numbers (0-9): Inputs Digit at the cursor
position.
39.)
[Erase] Erase the title. (See page 40.)
[Protect] Protects accidental recording, editing
deleting of the title. (See page 40.)
[Chap Edit] Displays [Chap Edit]
41-42.)
menu.
(See
or
4.
page
To exit the menu, press SETUP or select [<
option on the [Edit] menu then press ENTER.
then press ENTER to fix the
and return to the previous menu screen.
[OK]
name
Choose
[Thumbnail] Changes a favorite scene for the
thumbnail picture shown in the Title List menu.
(See page 40.)
5.
Choose
[Cancel] then press ENTER to return to
the previous menu screen without saving.
Choose [Reset] then press ENTER to delete all
characters.
Exit]
39
Erasing
a
Title
4.
If you choose to erase a title from the [Edit] menu, the
title or chapter is actually deleted from the disc.
1.
Useb/B/v/Vtochooseatitleyouwantto
erase on the [Edit] menu then press ENTER.
Repeat this step to select additional title.
The menu options appears on the right side of
Select [Erase]
option
from the
options
on
name.
Tip
If you select a title that has already been
the [Edit] menu, you can 'unprotect' it by
the
screen.
2.
Use b / B to select [OK] then press ENTER.
The lock mark will appear to the left of the title
the
protected on
choosing
options. After
[Unprotect] option from the [Edit] menu
doing that, you can edit and delete the title.
Changing
menu.
You
can
Title Thumbnails
select
a
favorite
scene
for the thumbnail
picture shown in the Title List menu.
1. Useb/B/v/Vtochooseatitleonthe[Edit]
menu
The
then press ENTER.
options
menu
appears
on
the
right
side of the
screen.
2.
Select [Thumbnail] from the
3.
Press ENTER. The
options.
Press ENTER.
3.
The confirm message for
Use b / B to select
4.
The selected
5.
Repeat steps
title(s)
1
-
deleting
will appear.
then press ENTER.
is deleted.
[OK]
3 to continue to
erase
from the
menu.
Notes:
If
more
titles
than two titles
are
are
combined into
repeatedly deleted,
the
one.
When you are deleting a title, only the last one
DVD+RW increases remaining recording time.
Protect
a
Title
accidental
recording, editing
title.
1.
against
deleting of the
Useb/B/v/Vtochooseatitleyouwantto
protect on the [Edit] menu then press ENTER.
Repeat step 1 to select additional title.
The menu options appears on the right side of
the
4.
Select [Protect] from the
Use
play,
find the
options.
5.
scene
you want.
Press THUMBNAIL to make the
List
List
Press ENTER.
The confirm message for protect will appear.
the
one
currently
that appears in the Title
menu.
The still
40
shown
pause step, search and slow-motion to
displayed picture
3.
as
below.
on
screen.
2.
appears
+RW
Use this function to protect
or
menu
picture
menu.
that you choose appears in Title
Editing
a
Title
by Chapter
Adding Chapter
The
[Chapter Edit] menu is where you can add/delete
chapter mark and use other function for chapter.
1.
Useb/B/v/Vtochooseatitleonthe[Edit]
menu
The
then press ENTER.
menu
options
appears
on
the
right
side of the
Yo u
3.
create
chapters
within
a
title
by inserting
chapter marks at the desired points.
1. Useb/B/v/Vtochooseachapteronthe
[Chap Edit] menu then press ENTER.
The menu options appears on the right side of
screen.
2.
can
Markers
the
screen.
Select
[Chap Edit] option then press
the options on the menu.
The [Chap Edit] menu will appear.
2.
Select [Add Mark] from the
3.
Press ENTER. The
options.
ENTER from
menu
appears
as
shown
below.
Useb/B/v/Vtochooseachapteronthe
[Chap Edit] menu then press ENTER.
Repeat this step to select additional title.
The menu options appears on the right side of
the
screen.
4.
Use
play,
find the
[Title] Returns
[Play] Play
to
[Edit]
backs the
[Del Mark]
you want.
5.
Press CHP. ADD to add
6.
Repeat step
chapter
5 to continue to add
mark.
chapter
from the
Edit ng
menu.
chapter.
chapter
mark.
(See
page
42.)
[Hide] Hides chapter mark. (See page 42.)
4.
scene
menu.
[Add Mark] Adds chapter mark. (See page 41.)
Deletes
pause step, search and slow-motion to
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see "Chapter Mark" on page 14).
Useb/B/v/Vtochooseanoptionthenpress
ENTER from the options on the menu.
41
Deleting Chapter
You
1.
Markers
Overwriting Recording
delete
chapter markers.
Useb/B/v/Vtochooseachapteronthe
[Chap Edit] menu then press ENTER.
Repeat this step to select additional chapter.
The menu options appears on the right side of
can
To overwrite
a new
video
Select [Del Mark] from the
recording
on a
previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
the
1.
Press MENU/LIST to
display
2.
Use v / V to choose
a
3.
Select
screen.
2.
+RW
options.
input
channel
4.
or
source
AV
the Title List
menu.
title you want to overwrite.
you want to record
(TV
input).
Press REC
(z) to start overwrite recording.
Overwrite recording starts from the start point
of
the title.
5.
Press STOP
(x)
to
stop the overwrite recording.
Notes:
This function is not available when
[Overwrite]
[Initial Setup] menu
3.
Press ENTER.
The confirm message for
4.
deleting
Use b / B to select
The selected
Hide
You
option is set to [Off] in the
(page14).
If the protected title is selected, confirm message
will appear. Select [Yes] then press ENTER to start
overwrite recording.
press ENTER.
is deleted.
Chapter
a
can
[OK] then
chapter mark(s)
will appear.
skip playing chapters
without
deleting
from
the disc.
1.
Useb/B/v/Vtochooseachapteronthe
Chapter List menu then press ENTER.
The menu options appears on the right side of
the
screen.
2.
Select [Hide] from the
3.
Press ENTER.
The
[Hide] appears
on
options.
the
right
of the
chapter
number.
Note:
If you select
chapter on the [Chap Edit]
menu, you can 'unhide' it by choosing [Unhide] option
on the menu. After doing that, you are able to play
back the chapter.
42
a
hidden
Reference
You
control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
Your TV with the
Controlling
Supplied Remote
You
Control
control the sound level, input source, and
power switch of your LG TV with the supplied remote.
You
can
using
can
manufacturer code.
can
control your TV
other TVs with the remote
Controlling
1.
down TV POWER button, press the
number buttons to select the manufacturer code
While
holding
for your TV
the buttons below.
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
If
more
them
than
at a
one
code number is listed, try entering
time until you find the one that works
one
with your TV.
TV Control
Buttons
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
Notes:
Depending
function
on
your TV,
the TV, even
manufacturer code.
on
all buttons may not
after entering the correct
some or
If you enter a new code number, the code number
previously entered will be erased.
By pressing
You
POWER
Turn the TV
AV
Switch the TV's
When you replace the batteries of the remote, the
code number you have set may be reset to the
can
on or
off.
input
default
source
between the TV and other
setting. Set
the
appropriate
code number
again.
input
sources.
PR +/--
Scans up or down through
memorized channels.
VOL +/--
Adjust
the volume of the TV.
43
Language
Use this list to
Codes
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
44
code from this list.
Code
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
Hungary
HU
New Zealand
NZ
Sweden
SE
Chile
CL
India
IN
NG
Switzerland
CH
China
CN
Indonesia
ID
Nigeria
Norway
NO
Thailand
TH
Colombia
CO
Israel
IL
Oman
OM
TR
Congo
CG
Italy
IT
Pakistan
PK
Turkey
Uganda
Costa Rica
CR
Jamaica
JM
Panama
PA
Ukraine
UA
Croatia
HR
JP
United States
US
CZ
KE
Paraguay
Philippines
PY
Czech Republic
Denmark
Japan
Kenya
PH
Uruguay
UY
DK
Kuwait
KW
Poland
PL
Uzbekistan
UZ
Ecuador
EC
LY
Portugal
PT
Vietnam
VN
Egypt
EG
Libya
Luxembourg
LU
Romania
RO
Zimbabwe
ZW
El Salvador
SV
Russian Federation
RU
Afghanistan
Argentina
AF
SG
SK
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
service.
Cause
Symptom
Solution
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
No
The TV is not set to receive recorder
signal output.
Select the appropriate video input mode
on the TV so the picture from the
recorder appears on the TV screen.
The video cable is not connected
Connect the video cable
picture.
Plug
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The equipment connected with the
audio cable is not set to receive
recorder signal output.
Select the correct input mode on the
audio receiver so you can listen to the
sound from the recorder.
The audio cables
Connect the audio cable
not connected
are
the TV.
on
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected
with the audio cable.
The audio
Replace
connecting
The disc is
cord is
damaged.
it with
new one.
Clean the disc.
dirty.
poor.
The recorder does not
start
No disc is inserted.
Insert a disc. (Check that the disc
indicator in the display window is lit.)
An
Insert
playback.
unplayable
The disc is
disc is inserted.
placed upside
down.
disc. (Check the disc
type, color system, and regional code.)
a
playable
Place the disc with the
down.
playback
guide.
Place the disc on the disc tray
correctly inside the guide.
The disc is dirty.
Clean the disc.
The
Cancel the Rating function
the rating level.
The disc is not
Rating
placed
within the
level is set.
signal from the external
component is copy-protected.
or
side
change
Yo u cannot connect via this recorder.
Connect the component directly to
your TV.
The picture from the
external input is
distorted
The video
Some channels are
skipped over when
Those channels
recorder.
are
not stored in the
Restore channels. See
on page 13.
picture
broadcasting
weak or missing.
Aerial
are
loose.
Tighten
The picture from the
external input is not
shown.
The recorder's
"Program
Edit"
usingv/V.
The
sound of
channel is
or
or
cables
source
is incorrect.
connections
Use AV to select
AV, Rear AV)
or
input
replace
cable.
channel
(Front
45
Cause
Symptom
Cannot play a disc
recorded using this
recorder on another
player.
Cannot record or did
not record successfully.
The disc
is not
Stereo Audio Record
and/or Playback is not
present.
Finalize the disc.
No solution.
Discs recorded with copy-once material
cannot be played on other players.
No solution.
The remaining blank space
disc is insufficient.
Use another disc.
on
the
source.
When setting the recording channel, the
channel is tuned on the TV's own tuner.
Select the channel
built-in TV tuner.
the recorder's
Clock in recorder is not set to correct
time.
Set clock to correct time. See "Clock
Timer has been
incorrectly.
Reprogram Timer. See "Timer
Recording" on page 33.
TV is not
No solution.
you
are
trying
to record is
(page 21)
You cannot record the
source
copy
recording
possible.
recorded in Video mode.
Some players will not play even a
finalized disc recorded in Video mode.
The
Timer
was
Solution
protected.
programmed
Stereo-compatible.
Setting"
on
page 15.
on
Broadcast program is not in stereo
format.
No solution.
The recorder A/V Out jacks are not
connected to TV A/V In jacks.
Make A/V connections. Stereo is
available only via A/V output from the
recorder.
The recorder Audio/Video Out is not
selected for viewing at the TV.
Select AUX
The recorder's TV audio channel is
Set TV audio channel mode to Stereo.
See "Changing TV audio channel" on
set to mono.
or
A/V
source as
TV
input.
page 32.
The remote control
does not work properly.
46
The remote control is not pointed at
the remote sensor of the recorder.
Point the remote control at the remote
sensor of the recorder.
The remote control is too far from the
recorder.
Operate
There is an obstacle in the path of the
remote control and the recorder.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
the remote control within
7m.
the batteries with
new ones.
Specifications
General
AC 110-240V, 50/60 Hz
19W
Power
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
430 X 49 X 300
2.7
mm
(w
x
h
x
d)
without foot
kg
5˚C to 35˚C
5 % to 90 %
PAL I, B/G, I/I, SECAM D/K, K1 colour
PAL or NTSC
Television system
Recording format
system
Recording
Recording
DVD-VIDEO
format
Recordable media
DVD+ReWritable, DVD+Recordable
DVD
Recordable time
4
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
(4.7GB): Approx. 1 hour (HQ mode),
hours (LQ mode), 6 hours (EQ mode)
2 hours
(SQ mode),
Video
PlaybackFrequency
27MHz
MPEG 2
48kHz
Dolby Digital
(PCM 48 kHz): 8 Hz to 20 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
DVD
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
(VBR support)
range
Hz to 20 kHz
Inputs
AERIAL IN
Aerial
input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
0 dBm more than 47 kohms, RCA jack (L, R) x 2
VIDEO IN
AUDIO IN
Outputs
VIDEO OUT
Audio output (digital
Audio output (analog
Vp-p 75 Ω, sync negative, RCA jack x 1
0.5 V (p-p), 75 Ω, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R)
1
audio)
audio)
x
1
Accessory:
RFCoaxialCable................1
Remotecontrol..........................1
Batteries...............................2
Design
and
specifications
are
subject
Manufactured under license from
trademarks of
Dolby
"DTS" and "DTS
Dolby
to
change
without notice.
Laboratories.
"Dolby",
"Pro
Theater
Systems,
Logic",
and the double-D
symbol
are
Laboratories.
Digital Out"
are
trademarks of
Digital
Inc.
47
P/NO
:
3834RD0072B
Download PDF

advertising