LG | DS8521P | LG DS8521P Owner’s Manual

DS8521PCA_NA4MSL_19H
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DS8521P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Notes
CAUTION
on
Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
Warning:
shock,
of this
do not
remove
product.
There
the
cover or
back
are no user-
serviceable
parts inside. Refer servicing
to
service
qualified
Warning:
personnel.
To reduce the risk of fire
or
shock, do not expose this
product to dripping or splashing water,
rain, or moisture. Do not place objects
electric
filled with water such
as
vases,
on
protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
copy
To reduce the risk of electric
the
product.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
Warning:
This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
SCAN PICTURE PROBLEMS, IT IS ECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL
525p
AND
625p
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
SERIAL NUMBER:
Warning:
laser
To
beam,
prevent direct exposure to
do not open the enclosure.
Visible laser radiation when open.
You
can
find the serial number
This number is
unique
on
the back of the unit.
to this unit and not available to
others. You should record
requested
and retain this
permanent record of your
guide
as a
information here
purchase.
Warning:
Never stare
directly
into the
laser beam.
Model No.
Serial No.
Caution: Do not install this product in
confined space such
similar unit.
2
as a
book
case or
a
Date of
______________________________
______________________________
Purchase_________________________
Moving
Contents
to another CHAPTER/TRACK
.
.
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
Introduction......................4
SymbolusedinthisManual..............4
AbouttheSymbolDisplay............4
NotesonDiscs........................4
HandlingDiscs......................4
StoringDiscs.......................4
CleaningDiscs......................4
TypesofPlayableDiscs.................5
Regionalcode........................5
Disc-relatedterms.....................6
FrontPanel...........................7
DisplayWindow........................7
RemoteControl........................8
.
.
.
.
.
.
.
.
.
.
.
.
SettingupthePlayer...................9
DVDPlayerConnections................9
Video and Audio Connections to Your TV
AudioConnectiontoYourTV.
.
.
.
.
.
.
.
.
Audio Connection to
.
.
.
.
.9
.9
Optional Equipment .10
On-ScreenDisplay....................11
.11
Playback Status/Restrictions
InitialSettings........................12
GeneralOperation...................12
.
.
.
.17
RepeatA-B........................17
Repeat............................17
3DSurround.......................17
TimeSearch.......................17
Zoom...........................18
MarkerSearch...................18
SpecialDVDFeatures.................18
Checking the contents of DVD discs: Menus .18
TitleMenu........................18
DiscMenu........................18
CameraAngle.....................18
.18
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
Subtitles.........................18
Playing
an
Audio CD
or
MP3/WMA Disc
.
.
.
.
.19
.20
Pause...........................20
MovingtoanotherTrack.............20
RepeatTrack/All/Off.................20
Search...........................20
Random..........................20
RepeatA-B.......................20
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.......................12
?MenuLanguage...................12
?DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
.12
DISPLAY..........................13
?TVAspect.......................13
?DisplayMode.....................13
?ProgressiveScan...................13
AUDIO...........................13
3DSurround.......................20
ProgrammedPlayback................21
.21
RepeatProgrammedTracks
.21
Erasing a Track from Program List
.21
Erasing the Complete Program List
ViewingaJPEGDisc..................22
.
?DolbyDigital/DTS/MPEG.
?SampleFreq.(Frequency).
Dynamic Range Control (DRC)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.
.
.
.
.
.
.14
.14
.14
?Vocal............................14
OTHERS..........................14
?PBC............................14
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow........................22
StillPicture.........................22
MovingtoanotherFile................22
Zoom.............................22
Torotatepicture.....................22
To listen to MP3 music watching picture
.22
.23
PlayingaDVDVRformatDisc
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService...............23
AdditionalFeatures...................24
LastSceneMemory..................24
ScreenSaver.......................24
SystemSelect........................24
.24
Controlling other TVs with the remote control
.
?AutoPlay........................14
B.L.E.
.16
Random...........................17
Audio CD and MP3 / WMA Disc Features
InstallationandSetup..............9
.
SlowMotion........................17
.
RemoteControlOperation..............8
Remote Control Battery Installation
.8
?
.16
.
Search............................16
...........................14
LOCK(ParentalControl)..............15
?Rating..........................15
.15
?Password(SecurityCode).
?CountryCode.....................15
.
.
.
.
.
.
.
.
.
.
.
Reference.......................25
LanguageCodes.......................25
CountryCodes........................25
Troubleshooting.......................26
Specifications.........................26
Operation.......................16
PlayingaDVDorVideoCD.............16
PlaybackSetup...................16
GeneralFeatures.....................16
MovingtoanotherTITLE..............16
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
About the
Symbol Display
ensure
reference.
"
"
may appear on your TV
and indicates that the function
owner's manual is not
This manual
provides
information
on
the
operation
display during operation
explained in this
available on that specific DVD
video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
location.
Notes
Symbol
on
Handling
Used in this Manual
Discs
Discs
Do not touch the
disc
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the
on
the disc.
of
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
and hints for
applicable only
symbol.
4
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
tips
A section whose title has
is
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
making
the task easier.
of the following symbols
represented by the
one
to the disc
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
manufactured for
DVD
is
designed and
playback of region
encoded DVD software. This unit
(8cm/12cmdisc)
only
DVD discs labeled "3"
or
"3"
can
play
3
"ALL".
Video CD
(VCD)
(8cm/12cmdisc)
Notes
Audio CD
?
on
Regional
Most DVD discs have
numbers in it
(8cm/12cmdisc)
Codes
clearly
a
globe
visible
on
number must match your DVD
code or the disc cannot play.
In addition, this unit plays DVD -R, DVD +R,
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
?
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
This indicates
capable
of
with Video
a product feature that is
playing DVD-RW discs recorded
Recording format.
Notes:
?
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side
or the recorded side) of a disc.
(the
labeled side
?
Do not
use
shaped
or
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
DVDs and Video CDs
Notes
on
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
not be available
or
designed by the software
playback features may
some
other functions may be added.
Manufactured under license from
Dolby
"Dolby", "Pro Logic", and the
symbol are trademarks of Dolby
Laboratories.
double-D
Laboratories.
DTS and DTS
Digital
Digital Out are
Systems, Inc.
trademarks of
Theater
5
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable media,
are
only
two standards for
meaning the DVD content can be
Single-sided discs can hold
erased and re-recorded.
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
sided recordable
(Video CD)
with
quality
CDs.
Title
(DVD only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
A title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
as
discs.
VCD
version 2.0 disc formats. PBC allows you to interact
system via menus, search functions, or other
with the
stereo sound.
MPEG
be title 2, and cast interviews could be title 3. Each
assigned a reference number enabling you to
locate it easily.
title is
Chapter (DVD only)
chapter is a segment
A
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
film
or one
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
Corp.
a
title such
series. Each
as a scene
chapter
in
a
is
the
may not be recorded.
On
MP3 is
of
a
assigned a chapter number, enabling you to locate
chapter you want. Depending on the disc, chapters
Scene
MP3
interview in
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
moving pictures
and still
Track
JPEG
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
A distinct element of audiovisual information, such
the picture or sound track for a specific language
(DVD),
or a
musical
Each track is
piece on a video or audio CD.
assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
6
as
(with multiple angles)
one
and several tracks
Front Panel
POWER
Switches the
player
ON and OFF.
PLAY(N)
playback.
OPEN/CLOSE(Z)
Opens
or
closes the disc
Starts
tray.
Display
window
Shows the current status of the
player.
Disc
Tray
Insert
a
Remote Sensor
disc here.
Point the DVD
Player
remote control here.
STOP
(
x
) Stops playback.
Display Window
Indicates current
function
player
(Play, Pause)
DVD inserted
CD Audio CD inserted
Indicates
repeat mode
VCD Video CD inserted
SVCD
Super
Video CD inserted
Indicates
DTS and
encoding
Dolby digital
of the current disc.
CHP/TRK
current
Indicates
chapter
or
Indicates total
time/elapsed
playing
time
track number
S VCD
CHP
AD
B
CD TRK
ALL
7
Remote Control
OPEN / CLOSE
Opens
and closes the disc
TV Control Buttons
tray.
TV POWER:
POWER
Switches DVD
Player
TurnstheTVon
ON and OFF.
Selects TV's channel.
a menu.
TV VOL +/--:
CLEAR
Removes
track number
on
the
program list or a mark
MARKER SEARCH
on
the
a
or
TV's volume.
Adjusts
AV:
Selects the TV's
menu.
source.
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to
previous chapter or track.
SCAN(m/M)
Search backward
off.
TV PR/CH +/--:
0-9 number buttons
Selects numbered items in
or
forward.
PAUSE/STEP(X)
playback temporarily/ press
repeatedly for frame-by-frame
playback.
Pauses
STOP(x)
Stops playback.
PLAY(N)
playback.
TITLE
Starts
title menu, if available.
Displays
DVD MENU
Accesses
menu on a
RETURN
DVD disc.
Removes the
bBvV(left/right/up/down)
Selects
item in the
an
?
menu
?
audio
subtitle
a
?
a
DVD
camera
angle
?
Accesses
or removes
setup
?
if
?
menu.
?
?
?
Remote Control
Operation
sensor
and
remote
batteries and
types of batteries such
standard, alkaline, etc.
8
never
as
sequence.
*
tracks in random order.
This button is not available.
control, and insert
(size AAA)
title all.
RANDOM
Battery installation
battery cover on
AAA AAA
mix different
image.
A-B
Detach the
press the buttons.
new
video
REPEAT
Plays
Do not mix old and
the program
on
Repeat chapter, track,
?
Point the remote control at the remote
track
ZOOM
Enlarges
Repeat
Remote Control
a
list.
available
SETUP
PROGRAM
Places
?
Selects
MARKER SEARCH
menu.
?
language.
ANGLE
SEARCH
Displays
language (DVD).
SUBTITLE
Selects
?
display.
AUDIO
an
point during
playback.
DISPLAY
Selects
MARKER
Marks any
selection.
Accesses On-Screen
menu,
menu.
ENTER
Confirms
setup
the video CD with PBC.
displays
?
with
and
the
two
rear
of the
batteries
aligned correctly.
Installation and
Setting
The
up the
picture
Setup
Video and Audio Connections to Your TV
Player
and sound of
a
nearby TV, VCR,
or
radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
turn off the unit after
removing
Make
sure
the DVD
TV and not to
or
the disc.
to the video in
video cable
Player Connections
your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
Depending
devices
is connected
Video: Connect the VIDEO OUT
player
DVD
player
directly
to the
VCR, otherwise the DVD image could
be distorted by the copy protection system.
a
on
jack on the DVD
using the
the TV
S-Video: Connect the S-VIDEO OUT
jack
DVD
the TV
Player
to the S-Video in
Component
necessary for additional connection
information.
on
(V).
the S-Video cable
as
jack
jack
on
the
on
using
(S).
Video
(Color Stream ):
Connect the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jacks on the DVD Player to the
corresponding in jacks on the TV using
cable (C).
Progressive
?
Scan
an
Y Pb Pr
(ColorStream pro):
a high-definition or
If your television is
"digital ready" television, you may take
advantage of the DVD Player's progressive
scan output for the highest video resolution
possible.
If your TV does not accept the Progressive
Scan format, the picture will appear
scrambled if you try Progressive Scan on
the DVD Player.
?
Notes:
?
?
Set the
Progressive to "On" on the setup
progressive signal, see page 13.
Set the
progressive
to "Off"
by removeing
menu
for
any disc
that "no
from the unit and close the disc
tray.
disc" is
window. Then press
releasing it.
displayed
on
the
display
see
STOP and hold it for five seconds before
?
Progressive
scan
does not work with the
video connections
(yellow
VIDEO OUT
analog
jack).
Audio Connection to Your TV:
Connect the left and
right AUDIO OUT jacks of the
Player to the audio left and right IN jacks on the
TV (A) using the audio cables. Do not connect the
DVD Player's AUDIO OUT jack to the phone in jack
(record deck) of your audio system.
DVD
9
Audio Connection to
Connect the DVD
for audio
player
Optional Equipment
to your
optional equipment
output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver,
or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
player
Digital Multi-channel sound
digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
A
/ video receiver that
supports
one or more
of the
audio formats
O
X
A
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
Notes:
?
If the audio format of the
match the
OPTICAL
produces
COAXIAL
DIGITAL INPUT
AUDIO INPUT
?
Amplifier (Receiver)
a
does not
strong,
Six Channel
Digital Surround Sound via a digital
only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
connection
?To
see
can
the audio format of the current DVD in the
on-screen
10
digital output
of your receiver, the receiver
distorted sound or no sound at all.
capabilities
display,
press AUDIO.
On-Screen
You
can
the
use
the
general playback status on
can be changed using the
on-screen display:
display
Some items
screen.
To
Display
the TV
menu.
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
Press DISPLAY
1.
Press v / V to select
2.
The selected item is
Press b / B to
3.
an
inputting
change
the title
Chapter
the
setting. You can
appropriate (e.g.
number).
For
some
also
functions,
setting.
?
If
no
provide
Playback
B, Numbers
pressed for 10 seconds,
display disappears.
the
B, Numbers
ENTER
0:20:09
Numbers, ENTER
Audio
language
Digital Audio
Output mode
b/Bor
and
language
Angle
AUDIO
ABC
b/Bor
1 ENG
InstaliodSeup
SUBTITLE
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Status/Restrictions
Example: On-Screen Display during
playing VCD
Repeat
title
A-B
Repeat
sequence
#1:1/9
Enter
Marker
Title
b /
all of the features
button is
on-screen
1/12
Time search
Subtitle
Notes:
Some discs may not
shown below.
Number
highlighted.
press ENTER to execute the
?
b /
ENTER
item.
the number buttons if
use
1/3
during playback.
Selection Method
Items
a
Track Number
Marker Search
123456789
Resume
Action
play
from this
prohibited
or
menu
point
not available
(or
PBC
1/3
Time search
B, Numbers
Numbers
0:20:09
ENTER
b/Bor
Audio Channel
Sound
b /
ENTER
mode)
AUDIO
3D SUR
b/B
11
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 12 to 15.
To
display
Menu
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SETUP to
display
the
A second press of
menu.
SETUP will take you back to initial
Move
To go to the next level:
Press B on the remote control.
Menu
Language
Select
a
language
for the
Setup
Disc Audio / Subtitle / Menu
Operation
Press SETUP. The
2.
Use v / V to select the desired
B to
move
alternate
3.
5.
move
appears.
option
the selected item,
as
well
as
DVD
Original:
Refers to the
disc
recorded.
was
original language
track
in which the
Other:To select another
language, press number
corresponding 4digit number according to the language code list in
reference chapter. If you enter the wrong language
buttons then ENTER to enter the
option
then
to the third level.
code, press CLEAR.
then press
ENTER to confirm your selection. Some items
require additional steps.
Press SETUP, RETURN,
on-screen
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
then press
to the second level. The screen shows
Use v / V to select the desired
menu.
12
menu
Use v / V to select the second desired
press B to
4.
Setup
setting for
setting(s).
and
Select the
1.
the current
menu
display.
To go back to the previous level:
Press b on the remote control.
General
Select
screen.
or
setting
PLAY to exit the
Setup
the
DISPLAY
Notes:
At this
DISPLAY
TV
16:9
Aspect
Display
Mode
Progressive
the
Off
Move
only
video
Aspect
buttons
a
16:9: Select when
Mode
Display
Display
Mode
standard 4:3 TV is connected.
5.
16:9 wide TV is connected.
a
DVD
works
setting
when the TV
only
upper and
Panscan:
Automatically displays
Aspect
bands
the wide
and cuts off the
on
picture
portions
the
on
that do not
fit.
Progressive
Scan
progressive
component out of the DVD to the input of
your monitor/television, set your television or monitor
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
then press B.
DISPLAY
TV
player
to
Progressive
InstaliodSeup
setting for progressive scan output is
image will only be visible on a progressive
compatible TV or monitor. If you set Progressive
entered,
an
Scan to On in error, you must reset the unit. First,
remove the disc in the DVD Player. Next, press STOP
( x ) again and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
AUDIO
Each DVD disc has
Set the
of audio
player's
a
variety of audio output options.
options according to the type
AUDIO
system you
use.
scan:
Connect
to
ENTER will set the
mode.
DVD
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To Turn ON
appears on your screen
Use the b / B
Once the
scan
screen
Component
Caution:
Displays a wide picture with
lower portions of the screen.
the entire
is
black screen, your
highlighted as default.
to highlight Enter.
Pressing
scan
mode is set to "4:3".
Letterbox:
menu
Cancel is
DVD
4:3: Select when
a
Select
4. When the confirm
TV
displaying
goes to
may not be
screen
television/display
compatible to
progressive scan.
In this case the player will time out after 10-12
seconds if no other keys are pressed. After the unit
times out, the player will automatically return to
standard format, and your picture will return.
Widescreen
Scan
point
video. If your
menu
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 kHz
DRC
On
Vocal
On
Move
Select
Aspect
Display
Mode
Progressive
Scan
On
Off
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
13
Dolby Digital
/ DTS / MPEG
OTHERS
DVD
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
a
Dolby Digital,
DTS
The PBC, Auto
Play
and B.L.E.
settings
can
be
changed.
or
OTHERS
MPEG decoder.
PBC
PCM
MPEG): Select when
two-channel digital stereo amplifier.
in Dolby Digital or MPEG will be
(for Dolby Digital
connected to
a
DVDs encoded
automatically
Auto
/
On
Off
Play
B.L.E.
On
downmixed to two-channel PCM
audio.
Off
not
(for DTS): If you select "Off", the DTS signal is
output through the DIGITAL OUT jack.
PBC
Sample Freq. (Frequency)
Set
DVD
On:
If your receiver or amplifier is NOT capable of
96 kHz signals, select 48 kHz. When this
Control
(PBC)
Video CDs with PBC
Off:
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
without
Video CDs with PBC
as
way
them.
Auto
You
amplifier
to
verify
its
played according
are
played
Control
(DRC)
DVD
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
can
the
same
DVD
set up the DVD Player so a DVD disc
starts playing whenever the DVD is
Play
play
mode is set to On, this DVD
back the title
player will
longest playback time and
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
Notes:
The Auto
without
This allows you to listen to a movie at a lower volume
losing clarity of sound. Set DRC to On for this
B.L.E.
effect.
To select the black level of
(Black
preference
DVD
On:
when
a
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
on
the disc mix into
Level
Expansion)
and monitor's
Expanded
grey scale.
Off: Standard grey scale.
some
DVD
(0
IRE cut
(7.5
off)
IRE cut
DVDs.
VCD
playback pictures.
ability.
off)
Note:
The B.L.E. function works NTSC
14
to
Audio CDs.
Play
If Auto
then
playing.
are
search for title that has the
Dynamic Range
only
Off.
automatically
capabilities.
Set to On
or
inserted.
Check the documentation for your
Vocal
to On
the PBC.
choice is made, this unit automatically converts any 96
kHz signals to 48 kHz so your system can decode
signal through
VCD
Playback
handling
this unit passes each type of
any further processing.
Select
Move
system only.
Set your
LOCK (Parental
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Control)
selection, then
LOCK
Password
Rating
Unlock
Password
New
Country
Code
You
can
(Security Code)
enter
1. Select Password
on
2. Follow
shown left
step
"New" is
Move
DVD
Some movies contain
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
more
suitable
scenes as an
to
If you
new
again
Press SETUP to
Input
the
Enter
a new
1. Select
Country
Code
menu
then
press B.
2. To
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select
rating
a
Rating
1-8:
from 1 to 8
using
menu.
InstaliodSeup
Code
display
code
as
the
can
Setup
clear it
using
menu.
security
the v / V buttons.
described above.
DVD
Enter the code of the
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
then press ENTER.
number "210499" and the
6-digit
3.
the LOCK
4-digit code,
verify.
to
forget your Security
your children from being able to view
material you believe is unsuitable.
preventing
on
or
code is cleared.
scenes
"Rating"
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
2.
control feature allows you to block
below the rating you input, thereby
parental
access
it
4. Press SETUP to exit the
1.
alternative.
The
as
menu
Select
Input
for children to view.
2
the LOCK
highlighted.
3. Enter the
Rating
change password.
or
US
country/area
whose standards
used to rate the DVD video disc, based
list in the reference chapter.
were
1.
Select
Code"
"Country
on
the LOCK
on
menu
the
then
press B.
2.
Follow
3.
Select the first character
4.
step
Shift the
2
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
Rating one (1) has the most
rating eight (8) is the least
restrictions and
5.
restrictive.
Press ENTER to confirm your
country code
selection.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
15
Operation
Playing
DVD
a
or
Video CD
General Features
Note:
Unless stated otherwise, all
Playback Setup
Turn
1.
the TV and select the video
on
connected to the DVD
Turn
2.
the
the audio
on
input
source
input
source
player.
player.
side down.
Press OPEN/CLOSE to close the
4.
starts
automatically.
If
playback
tray. Playback
does not start,
press PLAY.
In
some
Moving
to another TITLE
When
disc has
a
cases, the disc
menu
might
Use the bBvVbuttons to select the
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
B to
You
Off
(See
operating
may differ. Follow the instructions on
You also may set PBC to
menu screen.
"PBC"
on
page
move
can
a
another
?DVDs may have a region code. Your player does not
play discs that have a region code different from
The
region
code for this
b /
use
to another title.
player
disc has
on a
more
than
one
chapter/track
its number while
more
than
track, you
one
chapter
can move
or a
to
follows:
as
Press SKIP .
beginning
?
or > briefly during playback
chapter/track or to return to the
the current chapter/track.
to
of
Press SKIP . twice
briefly
to
step back
to the
previous chapter/track.
?To go
to any chapter during DVD playback,
DISPLAY
and press v / V to select the
press
chapter/track icon. Then, input the chapter/track
directly
numberoruseb/B.
Search
1.
Press SCAN
2.
Press SCAN
is 3
3.
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
DVD; X2, X4, X16
or
X100
Video CD; X2, X4
or
X8
to select the
To exit SEARCH mode, press PLAY.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
different audio channel
16
playback
(0-9) or
number
select the next
14).
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 15.)
player.
(three).
to
can move
is
title
If
your
appropriate
play any title by inputting
is stopped.
disc has
Notes:
?
title, you
When
Use the number buttons to select the track you
and
one
to another CHAPTER/TRACK
want to view and press RETURN to return to the
settings
than
Moving
?
procedures
then the
stopped
screen.
the each
use
appear
instead:
Menu
more
another title. Press DISPLAY while
playback
menu screen.
described
system (if applicable) and select
connected to the DVD
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback
3.
operations
the remote control. Some features may also be
available on the Setup menu.
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
repeat
The DVD
2.
player
Use the SCAN
will
(X) during playback.
now
(m
or
M)
to select the
or
or
required
t 1/2
T 1/16, T 1/8, T 1/4,
T 1/2
or
disc.
a Video CD, the Slow speed changes: T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
To exit Slow Motion mode, press PLAY
-
a
desired
Repeat Chapter/Title/Off
chapter.
Chapter: repeats
the current
?
Title:
current title.
?
Off
repeats the
does not
:
?
Track
?
All
?
Off
-
play repeatedly.
Repeat Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
does not
:
On
a
on
the
play repeatedly.
Video CD with PBC, you must set PBC to Off
setup menu to use the repeat function (See
"PBC"
Note:
on
page
14).
If you press SKIP (>) once during Repeat
Chapter (Track) playback, the repeat playback
?
(N).
to select
Notes:
?
With
3.
during playback
?
Video CDs
go into PAUSE mode.
t 1/16, t 1/8, t 1/4,
speed:
(backward),
(forward).
on a
mode.
DVD Video Discs
To exit still motion mode, press PLAY.
Press PAUSE/STEP
title/chapter/all/track
a
Press REPEAT
Slow Motion
1.
play
can
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
cancels.
Slow motion
in
playback
reverse
is not
with
possible
Video CDs.
3D Surround
To
Random
produce
3D surround effect that simulates multi-
a
channel audio from two stereo
1.
Press RANDOM
during playback.
automatically begins random playback
RANDOM appears
2.
Press RANDOM
on
again
the TV
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
the five+
The unit
audio
and
screen.
to normal.
1.
Press DISPLAY
2.
Use v
The sound
Tip:
By pressing
SKIP >
during random playback, the
(track) and resumes random
3.
during playback.
V to select the sound
or
option
will be
option.
highlighted.
UseborBtotoselect"3DSUR".
To turn off the 3D Surround effect, select "Normal".
unit selects another title
playback.
Time Search
Note:
On
a
the
setup
Video CD with PBC, You must set PBC to Off
menu to use the random function (See
"PBC"
on
Repeat
To
1.
page
1.
a
sequence.
3.
Press A-B at your chosen
on
the TV
starting point.
"
A
again at your chosen end point.
briefly on the TV screen and
repeat sequence begins.
Press A-B
again
the disc:
The time search
during playback.
elapsed playing time.
Press v / V to select the time clock icon and "-:--:-
appears.
Input
the
required
start time in
seconds from left to
screen.
B" appears
on
hours, minutes, and
"
-
right.
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
Press A-B
-
at any chosen time
box shows the
2.
briefly
playing
Press DISPLAY
-"
repeat
"A
3.
To start
14).
A-B
appears
2.
on
the
4.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
17
Zoom
Use
1.
to
zoom
enlarge
Press ZOOM
the video
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
DVD Features
Checking
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU.
Each press of the ZOOM button changes the TV
in the sequence: 400% size → 1600% size
Input
the
B v V buttons to
corresponding
highlight your
number
or use
the b
selection. Then press
ENTER.
screen
→
normal size
Title Menu
3.
Use the bBvVbuttons to
zoomed
4.
To
move
the
through
Press TITLE. If the current title has
1.
picture.
normal
resume
playback,
repeatedly.
CLEAR button
press ZOOM
or
2.
on some
DVDs.
3.
Marker Search
To enter
You
start
can
the TV
point
a
on
screen
offers features such
menu
subtitle
angles,
as camera
options,
and
Press TITLE to exit.
Press DVD MENU and the disc
from up to nine memorized
marker, press MARKER at the
playback
To enter
points.
desired
may appear.
menu, the
a
Otherwise, the disc
Disc Menu
Marker
a
menu
screen.
spoken language and
chapters for the title.
Note:
Zoom may not work
appears
The
on
the
menu
the disc. The Marker icon appears
to enter up to nine
Press DVD MENU
on
briefly. Repeat
Camera
menu
is
displayed.
to exit.
Angle
If the disc contains
markers.
again
scenes
recorded at different
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
To Recall
or
1.
During
disc
search
menu
2.
3.
Clear
Marked Scene
a
playback,
appears
press SEARCH. The marker
on the screen.
Within 10 seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
marked
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
Tip:
The
angle
scenes
indicator will blink
recorded at different
angle switching
is
on
the TV
angles
screen
as an
during
indication that
possible.
number is erased from the list.
4.
You
on
any marker by inputting its number
the marker search menu.
can
play
Changing
the Audio
Press AUDIO
different audio
Language
repeatedly during playback
language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
a
main and
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
Subtitles
Press SUBTITLE
repeatedly during playback
languages.
the different subtitle
18
to
see
Playing
an
Audio CD
or
MP3/WMA Disc
MP3 / WMA disc
limited
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
player
is
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
within 22
?
with this
compatibility
follows:
as
-
-
-
Audio CD
?
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
or
ENTER and
playback
starts.
?
?
AUDIO CD
0:00:00
1/12
List
Program
Track1
Track2
creates
Track3
an
ISO 9660 file
system.
Track4
?
Track5
File
names
should have
a
maximum of 8 letters
Track6
and must
Track7
Track8
?
They
incorporate
an
should not contain
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
?
MP3 / WMA
1.
Press v / V to select
to
2.
see
a
folder, and press ENTER
the folder contents.
Press v / V to select
ENTER.
Playback
a
or
on
the disc should be
less than 999.
This DVD
track then press PLAY
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
starts.
MUSIC
0:00:00
The total number of files
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
1/104
Program
List
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
1-Music1
2-Music2
3-Music3
4-Music4
Operation
5-Music5
Customers should note that
6-Music6
7-Music7
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Note:
should
Displays path
of track from the disc
on
the TV
screen.
always
be
sought
from the
copyright
owner.
Tip:
?
If you
are
in
a
file list
on
the MP3/WMA
want to return to the Folder
highlight
?
list,
use
menu
and
the v / V to
and press ENTER.
PressandholdV/vtogotothenext/previous
page.
?
On
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
on
top of the
menu
is
highlighted.
19
Audio CD and MP3 / WMA Disc
Random
Features
1.
Press RANDOM
during playback.
Playback begins immediately and
on
appears
Pause
2.
1.
Press PAUSE/STEP
2.
To return to
RANDOM
menu screen.
To return to normal
repeatedly
during playback.
the
Random
playback, press RANDOM
disappears from the
until RANDOM
menu screen.
press
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
Tip:
SKIP >
By pressing
Moving
1.
to another Track
Press SKIP
(.
>) briefly during playback
track or to return to the beginning
3.
Press SKIP . twice
previous
track.
You
play
can
playback,
resumes
the
random
playback.
or
to go to the next
of the current track.
2.
random
during
unit selects another track and
any track
briefly
to go back to the
by inputting
its number.
Repeat
A-B
1.
To
repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
2.
Press A-B
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
Repeat Track/All/Off
You
1.
can
play
a
track/all
on a
Press REPEAT when
repeatedly.
disc.
playing
a
disc. The
repeat
3.
icon appears.
2.
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
Press REPEAT to select
?
Track:
?
All:
?
Off(No display):
a
desired
repeats the current track
repeats all the tracks on a disc.
does not
menu screen.
repeat mode.
play repeatedly.
3D Surround
To
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
Note:
the five+
If you press SKIP (>) once during Repeat Track
playback, the repeat playback cancels.
audio
1.
Press AUDIO
during playback.
"3D SUR" appears
2.
Search
20
To return to normal
repeatedly
1.
Press SCAN
2.
Press SCAN (m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
3.
To exit SEARCH mode, press PLAY.
(m
or
M) during playback.
on
the
playback, press AUDIO
disappears from the
until "3D SUR"
menu screen.
menu screen.
5.
Programmed Playback
1.
Insert
a
(Audio CD)
999
or
have
1.
MP3/WMA
menu
AUDIO CD
1/12
appears
0:00:00
List
Program
played
in
can
play
a
the
on
Program
list
once.
Tracks
title/chapter/all/track
Press REPEAT when
as
below.
2.
playing
Press REPEAT to select
?
Track:
?
All:
?
Off(No display):
MUSIC
0:00:00
Playback begins
a
on a
disc.
disc. The
repeat
icon appears.
Audio CD and MP3/WMA Discs:
or
ENTER to start.
Repeat Programmed
You
disc.
Audio CD
or
stops after all of the tracks
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program can contain 99 tracks
tracks (MP3/WMA).
Press PLAY
the order in which you programmed the tracks and
"PROG." appears on the display window. Playback
1/104
Program
List
Track1
Track8
Track2
Track3
1-Music1
Music16
Track3
Track12
2-Music2
Music8
Music5
Track4
Track7
3-Music3
Music9
Track5
Track6
4-Music4
Music1
Track6
Track9
5-Music5
Music7
Track7
Track10
6-Music6
Music6
Track8
Track1
7-Music7
Music3
a
desired
repeat mode.
repeats the current track
repeats all the tracks on programmed list.
does not
play repeatedly.
Note:
If you press SKIP (>) once during Repeat Track
the repeat playback cancels.
playback,
Audio CD Menu
MP3/WMA Menu
Erasing
Video CD: Press PROGRAM while
playback
is
On
Video CD with PBC, you must set PBC to Off on
setup menu to use the programmed playback (See
a
"PBC"
on
page
14).
"
list.
Select
0:11:07
Repeat
"
1/4
List
Program
Program
Track1
Track2
Track2
Track3
Track3
Track4
Track4
Track1
List
Press CLEAR. Or, select
icon then Press
ENTER to place the selected track on the Program
Erasing
VIDEO CD
Program
2.
The program menu appears. Press
RETURN to exit the menu.
the
Track from
Use vVbBto select the track that you wish to
erase from the Program list.
stopped.
Note:
a
1.
the
to
erase
"
additional tracks
Complete Program
on
the list.
Operation
List
", then press ENTER. The
for the disc is erased.
complete
Note:
The programs
removed.
are
also cleared when the disc is
Video CD Menu
2.
Select
3.
Press PROGRAM. Or, select
icon then
ENTER to place the selected track on the Program
track
on
the List.
"
list.
Repeat
You
can
""
4.
a
to
place
"
additional tracks
the list.
add all tracks in the disc. Select
icon then press ENTER.
Select the track you want to start
playing
list. Press and hold v / V to
Program
previous
next /
on
on
move
the
to the
page.
21
Viewing
a
JPEG Disc
Moving
Using this DVD Player you can view Kodak PICTURE
CDs and discs with JPEG files.
1.
Insert
a
disc and close the
appears
the TV
on
tray. The PHOTO
menu
screen.
JPEG
to another File
Press SKIP
(. or >) or cursor (v or V) once
viewing a picture to advance to the next or
previous file.
while
Zoom
JPEG
Use
to enlarge
page)
PHOTO
List
Preview
(see
JPEG Folder 1
zoom
18
the
photo image.
JPEG Folder 2
II
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press b / B
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
To listen to MP3 music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
use
the v / V buttons
the remote to
Slide Show starts from the selected file if
While
to the
or
PLAY.
Speed
is not Off.
viewing a file, you can press STOP
previous menu (PHOTO menu).
to
containing
the two
types of file in
3.
Press v / V to select
4.
Use B to select
Playback
STOP is
display
starts. The
a
PHOTO
photo
menu.
file.
icon then press ENTER.
playback will continue until
pressed.
There
you
can
listen
picture are included in the same disc,
only MP3 music during watching
picture.
four Slide
: >>> (Fast),
Speed options
(Slow) and II (Off).
Use vVbBto highlight the Speed. Then, use b /
B to select the option you want to use then press
are
(Normal),
>
JPEG disc
limited
?
with this
player
Depending
is
upon the size and number of JPEG
a long time for the DVD player
to read the disc's contents. If you don't
On
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
on
top of the
menu
is
highlighted.
display
---
2048
JPEG
see an on-
after several minutes, some of the
files may be too large
reduce the resolution of
the JPEG files to less than 5M pixels as 2760 x
screen
Press RETURN, information of file is hidden.
Slide Show
compatibility
follows:
as
files, it could take
PHOTO word
?
to MP3 music files
player.
Press TITLE to
ENTER.
?
listering
disc.
Tip:
PressandholdV/vtogotothenext/previous
>>
JPEG
When MP3 and
page.
?
same
2.
move
Tip:
?
the
on
to rotate the
picture
watching picture
files while
display
Insert the disc
1.
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
option
can
recorded
and press ENTER.
highlight
3.
on
You
a
counter clockwise.
?
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 999.
Use vVbBto
press ENTER.
Still Picture
highlight
the
(Slide Show)
then
?
Some discs may be incompatible due to a
recording format or the condition of disc.
different
JPEG
?
Ensure that all the selected files have the
extensions when
1.
Press PAUSE/STEP
The
2.
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
If the files have
rename
press
?
File
them
names
are
Windows
22
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
the files
copying
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player. Even though
image files in
Maintenance and Service
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
using
using
the DVD-Video format that have been finalized
a
?
This unit will
Insert
menu
a
play DVD-RW discs recorded using
Recording (VR) format.
disc and close the
appears
on
the TV
tray. The TITLE LIST
screen.
When
shipping
Please
?
save
?
Press v / V to select
ENTER and
a
playback
track then press PLAY
or
packing
Do not
use
near
volatile
liquids
such
as
insecticide
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
the unit
To clean the
played
in
player.
DVD RECORDER.
kinds of discs and
are
made with CPRM data
Player
display
does not
by
support these
the "CHECK DISC".
protection system (with scramble
system) only allowing the recording of 'copy once'
a
copy
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
player
is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but
you cannot then make a copy of those recordings.
CPRM recordings can only be made on DVD-RW
can
discs formatted in VR mode, and CPRM recordings
can only be played on players that are specifically
compatible
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
Operation
the surface of the
unit.
What is 'CPRM'?
CPRM is
surfaces
moistened
Some DVD-VR disc
you
carton and
the exterior surfaces clean
Cleaning
Unfinalized DVD-R/RW discs cannot be
This
original shipping
starts.
Note:
this
the
the unit
factory.
spray
?
before
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Keeping
?
chapter
service technician.
the Unit
Handling
at the
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
Maintaining
the Unit
The DVD
player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
use.
contact your nearest authorized
service center.
with CPRM.
23
Controlling
Additional Features
Last Scene
This
player
even
if you
remove
player.
scene
from the last disc
remains in memory
the disc from the player or switch
scene
If you load
scene is
memorized, the
a
disc that has the
automatically
scene
You
player
does not memorize the
you switch off the
the disc.
player
before
player
Stop
scene
of
commencing
a
input
source, and
play
While
holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV
disc if
to
2.
If
appears when you leave the DVD
mode for about five minutes. If the
displayed
Player automatically turns
(see
the table
below).
Release TV POWER button.
more
them
than
at
one
one
a
code number is listed,
time until you find the
try entering
one
that works
with your TV.
for five minutes, the DVD
itself off.
Select
You must select the
TV
control the sound level,
Code numbers of controllable TVs
Screen Saver is
System
can
and
remote
manufacturer code.
1.
screen saver
in
input source,
supplied
recalled.
Screen Saver
The
control the sound level,
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
Note:
This
can
power switch of your LG TV with the
control.
memorizes last
that is viewed. The last
off the
You
Memory
other TVs with the remote control
mode for your
appropriate system
system. If NO DISC appears in the display window,
press and hold PAUSE/STEP for more than 5 seconds
to be able to select a system (PAL, NTSC, or AUTO).
Manufacturer
Code Number
LG / GoldStar
1
(Default),
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
2
Note:
?
your TV, some
the TV, even after
manufacturer code.
Depending
function
?
on
on
or
all buttons may not
the correct
entering
If you enter a new code number, the code number
entered will be erased.
previously
?
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
again.
24
setting.
Set the
appropriate
code number
Reference
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Tu r kish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Tu rkmen
8475
Cambodian
7577
Italian
7384
Por tuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
Hungary
HU
New Zealand
NZ
Sweden
SE
Chile
CL
India
IN
Switzerland
CH
CN
Indonesia
ID
Nigeria
Norway
NG
China
NO
Thailand
TH
Colombia
CO
Israel
IL
Oman
OM
TR
Congo
CG
Italy
IT
Pakistan
PK
Turkey
Uganda
Costa Rica
CR
Jamaica
JM
Panama
PA
Ukraine
UA
Croatia
HR
JP
Pa raguay
PY
United States
US
KE
Philippines
PH
Uruguay
UY
KW
Poland
PL
Uzbekistan
UZ
LY
Por tugal
PT
Vietnam
VN
LU
Romania
RO
Zimbabwe
ZW
Russian Federation
RU
CZ
Japan
Kenya
Denmark
DK
Kuwait
Ecuador
EC
Egypt
EG
Libya
Luxembourg
El Salvador
SV
Czech
Republic
Country
Code
Country
Ethiopia
Fiji
AF
SG
SK
UG
25
Tr oubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD player does
?
No disc is inserted.
?
Plug the power
securely.
Insert
picture.
disc.
(Check
that the DVD
audio CD indicator in the
not work.
No
a
cord into the wall outlet
?
The TV is not set to receive DVD
?
lit.)
Select the
appropriate
mode
signal output.
?
window is
The video cable is not connected
or
display
video
input
the TV.
on
?
Connect the video cable
?
Select the correct
securely.
securely.
No sound.
?
The
equipment
connected with the
audio cable is not set to receive DVD
audio receiver
signal output.
?
?
The power of the equipment connected
with the audio cable is turned off.
?Turn
The AUDIO
?
options
position.
wrong
The DVD
not start
player does
playback.
?
An
unplayable
are
the
on
equipment
connected with
the audio cable.
set to the
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
disc is inserted.
Insert
?
The
rating
level is set.
a
disc.
playable
Cancel the
?
the
?
The remote control is not
the remote
The remote control
properly.
mode of the
(Check
the disc
type, color system, and regional code.)
?
does not work
input
you can listen to the
sound from the DVD player.
so
?
sensor on
rating
function
or
change
level.
?Point the remote control at the remote
pointed at
player.
the DVD
sensor
The remote control is too far from the
DVD
rating
?
player.
of the DVD
player.
Operate
the remote control closer to
the DVD
player.
Specifications
DIGITAL OUT (COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
General
Power
requirements:
AC 110-240 V
Power
consumption:
12W
,
50/60 Hz
DIGITAL OUT
3 V
Dimensions
(Approx.):
360x39x242mm(WxHxD)withoutfoot
75
(Y) 1.0 V (p-p), 75 Ω, negative
(C)0.3V(p-p)75Ω
1
650
nm
PAL / NTSC
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
x
1
Signal-to-noise ratio:
More than 100 dB (ANALOG
sync, Mini DIN
4-pin
x
1
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
1
Batteries
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
Note:
specifications
are
subject
to
change prior
only)
(DVD/CD)
Accessories
Video cable
AUDIO OUT:
OUT connectors
Harmonic distortion: Less than 0.008%
Dynamic range:
More than 90 dB
COMPONENT VIDEO OUT:
26
x
CD:8Hzto20kHz
Ω, sync negative, RCA jack
and
laser, wavelength
Signal system:
5 % to 90 %
S-VIDEO OUT:
Design
connector
Laser:
VIDEO OUT:
V(p-p)
(OPTICAL):
Ω, Optical
Semiconductor
Outputs
1
75
System
Weight (Approx.): 1.95 kg
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
(p-p),
notice.
(2)
(1),
Audio cable
(1),
Remote control
(1),
P/NO
:
3834RD0019H
Download PDF