LG | NE9321P | LG NE9321P Owner’s Manual

NE9421CRPM_NA4MSL_ENG
Stylish
System
DVD Micro
OWNER'S MANUAL
MODEL
:
NE9421P
Before
connecting, operating
please
read this instruction
adjusting this product,
booklet carefully and completely.
or
CAUTION
CAUTION
Most
the Power Cord
concerning
appliances
recommend
they
be
placed
upon
a
dedicated circuit;
That
is,
a
appliance
CAUTION: THESE SERVICING
outlet circuit which powers only that
and has no additional outlets or branch
single
circuits. Check the
specification page
of this owner's
INSTRUCTIONS ARE FOR USE BY
manual to be certain.
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT PERFORM ANY
Do not overload wall outlets. Overloaded wall
SERVICING OTHER THAN THAT
outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are
CONTAINED IN THE OPERATING
dangerous. Any
INSTRUCTIONS UNLESS YOU ARE
electric shock
QUALIFIED TO DO SO.
your
or
of these conditions could result in
or
appliance,
deterioration,
fire.
exposed to water (dripping or splashing)
and no objects filled with liquids, such as
vases, should be placed on the apparatus.
examine the cord of
and if its appearance indicates damage
unplug it, discontinue use of the
appliance, and have
replacement part by
Caution: The apparatus should not be
Periodically
the cord
replaced
with
an
exact
authorized servicer.
an
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed in
door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
a
appliance.
SERIAL NUMBER:
You
can
find the serial number
This number is
unique
CAUTION: This
product employs
and retain this
Laser
System.
purchase.
To ensure proper use of this product,
please read this owner's manual carefully
Model No.
and retain for future reference. Should the
unit
require maintenance,
contact
an
authorized service center.
Use of controls, adjustments, or the
performance of procedures other than
herein may result in
hazardous radiation exposure.
those
specified
To
prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE
INTO BEAM.
WARNING: Do not install this
confined space such
similar unit.
a
2
as a
equipment
bookcase
or
in
Serial No.
guide
the back of the unit.
to this unit and not available to
others. You should record
a
on
as a
requested information here
permanent record of your
______________________________
______________________________
3DSurround......................17
Contents
TimeSearch........................17
Zoom...........................18
Introduction...................4
MarkerSearch...................18
SymbolusedinthisManual..............4
AbouttheSymbolDisplay............4
SpecialDVDFeatures.................18
Checking the contents of DVD discs: Menus .18
NotesonDiscs........................4
TitleMenu........................18
HandlingDiscs......................4
StoringDiscs........................4
CleaningDiscs......................4
TypesofPlayableDiscs.................5
Regionalcode........................5
DiscMenu........................18
Pause............................18
CameraAngle.....................18
.18
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
.
Subtitles.........................18
Disc-relatedterms.....................6
FrontPanel...........................7
.19
Audio CD or MP3/WMA Disc
.20
Audio CD and MP3 / WMA Disc Features
Pause............................20
RemoteControlOperation..............7
Remote Control Battery Installation
.7
MovingtoanotherTrack..............20
RepeatTrack/All/Off.................20
RemoteControl........................8
Search...........................20
.
.
.
.
.
.
Playing
an
.
.
.
.
.
.
Random..........................20
InstallationandSetup...
..9
......
SettingupthePlayer...................9
DVDPlayerConnections................9
Video and Audio Connections to Your TV
AudioConnectiontoYourTV.
.
.
.
.
.
.
.
.
.
.
.
.
.9
.9
Optional Equipment .10
On-ScreenDisplay....................11
.11
Playback Status/Restrictions
InitialSettings........................12
GeneralOperation...................12
Audio Connection to
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.......................12
?MenuLanguage...................12
?DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
.12
DISPLAY..........................12
?TVAspect.......................12
?DisplayMode.....................12
?ProgressiveScan...................13
AUDIO...........................13
?DolbyDigital/DTS/MPEG.
?SampleFreq.(Frequency).
Dynamic Range Control (DRC)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.13
.13
.14
OTHERS..........................14
RepeatA-B........................20
3DSurround.......................20
ProgrammedPlayback................21
.21
RepeatProgrammedTracks
.21
Erasing a Track from Program List
.21
Erasing the Complete Program List
ViewingaJPEGDisc..................22
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow........................22
StillPicture.........................22
MovingtoanotherFile................22
Zoom.............................22
Torotatepicture.....................22
To listen to MP3/WMA music watching picture
.22
.
MaintenanceandService...............23
AdditionalFeatures...................24
LastSceneMemory..................24
ScreenSaver.......................24
VideoModeSetting..................24
SystemSelect......................24
UsingtheKaraokedisc.................25
Reference....................26
?PBC............................14
LanguageCodes.......................26
?AutoPlay........................14
B.L.E. (Black Level Expansion)
.14
LOCK(ParentalControl)..............15
?Rating..........................15
.15
?Password(SecurityCode).
AreaCodes...........................26
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Troubleshooting.......................27
Specifications.........................27
?AreaCode.......................15
Operation..................16-25
PlayingaDVDorVideoCD.............16
PlaybackSetup...................16
GeneralFeatures.....................16
MovingtoanotherTITLE..............16
.16
Moving to another CHAPTER/TRACK
.
.
.
Search............................16
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.16
.17
SlowMotion........................17
Random...........................17
RepeatA-B........................17
Repeat............................17
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
This manual
provides
information
on
the
on
that
specific
DVD video disc.
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes
Symbol
Used in this Manual
Handling
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
Discs
on
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
of
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
the task easier.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
A section whose title has
is
applicable only
symbol.
DVD
4
to the disc
of the
following symbols
represented by the
one
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
play only
Video CD
(VCD)
(8cm/12cmdisc)
Notes
Audio CD
?
(8cm/12cmdisc)
DVD discs labeled "3"
on
Regional
or
a
globe
visible
clearly
on
number must match your DVD
code or the disc cannot play.
In
addition, this unit plays DVD -R, DVD +R, DVD
RW, DVD +RW, SVCD and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
"ALL".
with
the
one or more
cover.
This
player's regional
-
Notes:
?
3
can
Codes
Most DVD discs have
numbers in it
"3"
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
use
shaped
or
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
Notes
on
on
the TV
screen.
Copyrights:
It is forbidden
law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
by
material without
permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
Manufactured under license from
Dolby
Laboratories. "Dolby", "Pro Logic", "MLP
Lossless", and the double-D symbol are
trademarks of Dolby Laboratories.
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE
PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
DTS and DTS
Digital Out
Digital Theater Systems,
are
Inc.
trademarks of
CONNECTION TO THE 'STANDARD DEFINITION'
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
525p
AND
625p
DVD
PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
are
only
two standards for
media, meaning the DVD
content
can
be
erased and re-recorded.
VCD
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
with
quality
stereo sound.
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
Chapter (DVD video discs only)
A chapter is a segment of a title such
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
MP3
MP3 is
audio
CDs.
Title
(Video CD)
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
popular compression format used for digital
files that yields very high near-CD quality.
a
Windows media audio file. A
Microsoft
type of coding / decoding
Corp.
JPEG
Joint Pictures
Scene
On
WMA
developed by
may not be recorded.
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Track
A distinct element of audiovisual
information, such
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
6
(with multiple angles)
one
and several tracks
Front Panel
POWER
Switches the
player
ON and OFF.
PLAY(N)
Starts playback.
OPEN/CLOSE(Z)
STOP(x)
Stops playback.
Opens
Disc
or
closes the disc
tray.
Tray
Insert
a
disc here.
Remote Sensor
Point the DVD
Player
remote control
here.
Display
window
Shows the current status of the
player.
Connect
a
Microphone jacks
microphone to MIC sockets.
Microphone volume control
Adjusts microphone volume.
Remote Control
Remote Control
Operation
Point the remote control at the remote
sensor
Battery installation
Detach the battery cover on
and
press the buttons.
remote
AAA AAA
Do not mix old and
mix different
new
batteries and
types of batteries such
standard, alkaline, etc.
never
control, and insert
(size AAA)
with
and
the
two
rear
of the
batteries
aligned correctly.
as
7
Remote Control
OPEN/CLOSE
Opens
and closes the disc
POWER
Switches DVD
Player
tray.
(DVD Player)
ON and OFF.
0-9 number buttons
Selects numbered items in
a menu.
CLEAR
Removes
track number
on
the
program menu or a mark
MARKER SEARCH
on
the
a
menu.
SCAN(m/M)
Search backward
or
forward.
PAUSE/STEP(X)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
PLAY(N)
Starts playback.
DVD MENU
Accesses
menu on a
DVD disc.
bBvV(left/right/up/down)
Selects
item in the
an
menu.
ENTER
Confirms
menu
?
DISPLAY
display.
AUDIO
Selects
an
audio
Selects
a
subtitle
a
DVD
?
language.
ANGLE
Selects
?
language (DVD).
SUBTITLE
camera
angle
?
?
or removes
setup
Selects the 4
?
Turns off
?
?
8
or removes
PRESET +/-
frequency
channel.
INPUT
SKIP(./>)
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
track.
STOP(x)
Stops playback.
TITLE
Displays
title menu, if available.
RETURN
Removes the
setup
menu,
the video CD with PBC.
?
MARKER
Marks any
?
displays
point during playback.
SEARCH
Displays
MARKER SEARCH
menu.
PROGRAM
Places
a
track
on
the program list.
?
ZOOM
video
image.
?
RANDOM
Plays
tracks in random order.
?
sequence.
KARAOKE
speakers.
mode.
?
title all.
KARAOKE
sound.
Selects the DVD/ TUNER/ AUX
?
Accesses
volume of
Sets the radio
?
Repeat
speaker
VOL +/-
Adjusts
?
types of sound quality.
MUTE
Enlarges
A-B
frequency.
?EQ
menu.
REPEAT
Repeat chapter, track,
TUNING
Selects the radio
?
Accesses
(subwoofer)
Switches subwoofer ON and OFF.
if
available
SETUP
POWER
?
selection.
Accesses On-Screen
?
?
menu.
ST/MN
Selects STEREO and MONO.
Installation and
Setting
The
up the
Setup
Video and Audio Connections to Your TV
Player
and sound of
radio
nearby TV, VCR,
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
picture
a
or
Make
sure
the DVD
TV and not to
Video: Connect the VIDEO OUT
Player Connections
your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices
directly to the
DVD image could
a
to the video in
video cable
Depending
is connected
VCR, otherwise the
be distorted by the copy protection system.
player
DVD
player
on
the
S-Video: Connect the S-VIDEO OUT
jack
DVD
the TV
to the S-Video in
Player
Component
necessary for additional connection
information.
on
(V).
the S-Video cable
as
jack
jack on the DVD
TV using the
jack
on
the
on
using
(S).
Video
(Color Stream ):
Connect the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
jacks on the DVD Player to the
corresponding in jacks on the TV using
cable (C).
an
Y Pb Pr
Progressive Scan (ColorStream pro):
If your television is a high-definition or
"digital ready" television, you may take
advantage of the DVD Player's progressive
scan output for the highest video resolution
possible.
If your TV does not accept the Progressive
Scan format, the picture will appear
scrambled if you try Progressive Scan on
the DVD Player.
?
?
Notes:
?
Set the
Progressive to "On" on the setup
progressive signal, see page 13.
?
Set the
progressive
from the unit.
see
menu
for
to "Off"
that "no
by removeing any disc
disc" is displayed on the
window. Then press STOP and hold it for
five seconds before releasing it.
display
?
Progressive
scan
video connections
does not work with the
(yellow
VIDEO OUT
analog
jack).
Audio Connection to Your TV:
Connect the left and
DVD
right
AUDIO OUT
jacks of the
right IN jacks on the
Player to the audio left and
TV (A) using the audio cables. Do not connect the
DVD Player's AUDIO OUT jack to the phone in jack
(record deck) of your audio system.
9
Audio Connection to
Connect the DVD
for audio
player
Optional Equipment
to your
optional equipment
output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
player
Digital Multi-channel
A digital multi-channel
sound quality. For this
/ video receiver that
O
X
sound
connection
provides
you need
multi-channel audio
supports
a
one or more
the best
of the
audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
A
Notes:
If the audio format of the
?
match the
OPTICAL
COAXIAL
DIGITAL INPUT
R
L
produces
AUDIO INPUT
?
Amplifier (Receiver)
does not
of your receiver, the receiver
distorted sound or no sound at all.
capabilities
a
strong,
Six Channel
Digital Surround Sound via a digital
connection can only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
?T
o see
is
the audio format of the current DVD in the
on-screen
10
digital output
display,
press AUDIO.
On-Screen
You
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
can
the
display
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
the
change
the title
Chapter
highlighted.
number).
For
some
also
functions,
no
the
button is
on-screen
provide
all of the features
pressed for 10 seconds,
display disappears.
Playback Status/Restrictions
Repeat title
Repeat
1/12
Enter
a
0:20:09
b/Bor
AUDIO
language
Angle
ABC
Action
b/Bor
1 ENG
SUBTITLE
InstaliodSeup
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
sequence
Selection Method
Marker
Marker Search
Resume
B,Numbers
Numbers, ENTER
language
and Digital Audio
Output mode
Track Number
MARKER SEARCH
b /
ENTER
Items
1/9
B,Numbers
Example: On-Screen Display during
playing VCD
Title
A-B
Number
Audio
Subtitle
Some discs may not
shown below.
If
b /
setting.
Notes:
?
1/3
Time search
setting. You can
appropriate (e.g.
press ENTER to execute the
?
Title Number
ENTER
item.
the number buttons if
use
Selection Method
Items
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Video
play
menu
from this
prohibited
or
point
not available
(or
PBC
1/3
Numbers
0:20:09
ENTER
b/Bor
Audio Channel
Sound
B,Numbers
ENTER
mode)
Time search
b /
AUDIO
3D SUR
b/B
11
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 12 to 15.
To
display
Menu
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SETUP to
display
the
Move
Select
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level:
Press B on the remote control.
Menu
Language
Select
a
language
for the
Setup
menu
and
display.
To go back to the previous level:
Press b on the remote control.
Disc Audio / Subtitle / Menu
DVD
Select the
General
1.
2.
move
alternate
setting for
setting(s).
appears.
option
the selected
item,
Use v / V to select the second desired
press B to
5.
menu
then press
to the second level. The screen shows
the current
4.
Setup
Use v / V to select the desired
B to
3.
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Operation
Press SETUP. The
move
as
well
option
as
then
then press
ENTER to confirm your selection. Some items
require additional steps.
or
Original:
Refers to the
disc
recorded.
was
original language
track
in which the
Other: To select another
language, press number
buttons then ENTER to enter the corresponding 4digit number according to the language code list in
reference chapter. If you enter the wrong language
the
code, press CLEAR.
to the third level.
Use v / V to select the desired
Press SETUP
on-screen
setting
PLAY to exit the
Setup
DISPLAY
DISPLAY
TV
Display
menu.
16:9
Aspect
Mode
Progressive
Widescreen
Scan
Off
Move
TV
DVD
Aspect
4:3: Select when
a
16:9: Select when
Display
Display
Select
Mode
Mode
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
upper and
12
bands
on
the
Automatically displays the wide picture on
screen and cuts off the portions that do not fit.
Panscan:
entire
Displays a wide picture with
lower portions of the screen.
the
Progressive Scan
AUDIO
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
Each DVD disc has
variety of audio output options.
player's AUDIO options according to the type
Set the
of audio
system you
progressive
scan:
Connect
component out of the DVD player to the input
of your monitor/television, set your television or
monitor to
1. Select
use.
AUDIO
On.
To active
a
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 KHz
DRC
On
Component Input.
"Progressive
Scan"
on
the DISPLAY
Move
menu
Select
then press B.
Dolby Digital
InstaliodSeup
DVD
/ DTS / MPEG
DISPLAY
TV
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
Aspect
Display
Mode
Progressive
Scan
other
On
with
a
Dolby Digital,
DTS
or
MPEG decoder.
Off
PCM
Prev.
equipment
Move
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital, DTS or MPEG will
be automatically downmixed to two-channel PCM
Enter
(for Dolby Digital
/
audio.
2. Select "On"
using
the v / V buttons.
.
Off
not
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Sample Freq. (Frequency)
Notes:
If your TV or monitor does not accept the Progressive
Scan format, the picture will appear scrambled if you
try Progressive Scan
4. When the confirm
on
the DVD
menu
Cancel is
buttons
5.
player
DVD
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 KHz. When this choice is
made, this unit automatically converts any 96 kHz
signals to 48 KHz so your system can decode them.
made, this unit passes each type of signal through
without any further
to
is
If your receiver or amplifier is capable of handling
96 KHz signals, select 96 KHz. When this choice is
highlighted as
to highlight Enter.
Pressing
scan
Player.
appears on your screen
default. Use the b / B
ENTER will set the
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
Progressive
mode.
processing.
Check the documentation for your
its capabilities.
amplifier
to
verify
Caution:
Once the
setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
First, remove the disc in the DVD Player.
Next, press STOP ( x ) and hold it for five seconds
before releasing it. The video output will be restored
the standard
visible
on a
setting,
and
conventional
picture will
analog TV or
a
once
again
to
be
monitor.
13
Dynamic Range
Control
B.L.E.
(DRC)
DVD
format, you
can
hear
a
program's
soundtrack in the most accurate and realistic
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
OTHERS
PBC, Auto Play and B.L.E. settings
can
be
changed.
OTHERS
PBC
Auto
On
Off
Play
B.L.E.
On
Move
PBC
Select
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
are
played according
are
played
to the PBC.
Off: Video CDs with PBC
way
You
same
Audio CDs.
as
Auto
the
Play
DVD
set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is
can
inserted.
If Auto
Play
mode is set to
On, this DVD player will
search for title that has the
then
play
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
time and
Notes:
The Auto
14
preference
On:
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Set
Level
Expansion)
To select the black level of
With the DVD
The
(Black
some
DVDs.
and monitor's
Expanded
playback pictures.
ability.
grey scale.
Off: Standard grey scale.
(0
(7.5
IRE cut
off)
IRE cut
off)
Note:
The B.L.E. function works NTSC
system only.
Set your
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Area Code
US
(Security Code)
enter
can
2. Follow
step
Input
Move
as
shown left
4-digit code,
again to verify.
it
new
DVD
for children to view.
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
more
suitable
scenes as an
If you
control feature allows you to block
to scenes below the rating you input, thereby
then press ENTER.
menu.
forget your Security Code
1.
Press SETUP to
2.
Input
3.
the
6-digit
display
the
can
Setup
clear it
using
InstaliodSeup
menu.
number "210499" and the
Enter
a new
code
your children from being able to view
material you believe is unsuitable.
Area Code
1. Select
Enter the code of the
preventing
"Rating"
on
the LOCK
menu
then
the reference
the
Rating, Password and Area Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
security
restrictions
described above.
DVD
area
whose standards
on
the list in
chapter.
Select "Area Code"
on
the LOCK
menu
then press
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
Rating one (1) has the most
and rating eight (8) is the least
disc, based
were
B.
5.
1-8:
as
used to rate the DVD video
press B.
Rating
or
code is cleared.
parental
3. Select
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
alternative.
2. To
menu
Select
4. Press SETUP to exit the
Some movies contain
access
2
the LOCK
on
highlighted.
3. Enter the
The
change password.
1. Select Password
"New" is
Rating
or
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
area
code selection.
restrictive.
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
15
Operation
Playing
a
DVD
or
General Features
Video CD
Notes:
Unless stated
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
playback
side down.
Press OPEN/CLOSE to close the
4.
tray.
some
cases, the disc
menu
might
Moving
to another TITLE
When
disc has
a
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
stopped
then the
b / B to
move
"PBC"
on
page
title
a
disc has
another
operating
?
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 15.)
player.
(three).
your
The
region
code for this
player
is 3
than
track, you
one
chapter/track
Press SKIP .
than
one
chapter
can move
or a
to
follows:
as
>
?
Press SKIP . twice
or
briefly
to
step back
to the
o
go
directly
to any
chapter during
DVD
playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press SCAN
2.
Press SCAN
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
to select the
DVD; X2, X4, X16 or X100
Video CD; X2, X4 or X8
3.
To exit SEARCH
Changing
different
mode, press PLAY.
the Audio Channel
Press AUDIO
16
to
previous chapter/track.
If
DVDs may have a region code. Your player does
not play discs that have a region code different from
more
more
briefly during playback
select the next chapter/track or to return to the
beginning of the current chapter/track.
?T
14).
disc has
on a
?
Notes:
?
its number while
can
When
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
(See
to another title.
to another CHAPTER/TRACK
procedures
Off
to
can move
playback is
appropriate number (0-9) or use
Moving
Use the number buttons to select the track you
want to view and press RETURN to return to the
and
title, you
one
another title. Press DISPLAY while
screen.
settings
than
appear
Use the bBvVbuttons to select the
Menu
more
play any title by inputting
playback is stopped.
instead:
menu screen.
use
the remote control. Some features may also be
available on the Setup menu.
You
Press PLAY.
In
otherwise, all operations described
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
on
Press
DVD Video Discs
mode, press PLAY.
Press PAUSE/STEP
The DVD
2.
player
?
Use the SCAN
(X) during playback.
will
now
(m
to select the
speed: t 1/16, t 1/8, t 1/4, or t
(backward), or T 1/16, T 1/8, T 1/4,
(forward).
With
Video
a
3.
required
To exit Slow Motion
T 1/2
or
T 1/2
or
(forward).
playback
in
reverse
is not
desired
?
Title:
?
Off
repeats the
does not
:
?
Track
?
All
?
Off
-
-
current title.
play repeatedly.
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
does not
:
play repeatedly.
Notes:
?
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 14).
?
If you press SKIP
(>)
(Track) playback,
the
mode, press PLAY (N).
Note:
Slow motion
a
1/2
CD, the Slow speed changes: T
1/16, T 1/8, T 1/4
disc.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video CDs
go into PAUSE mode.
M)
or
title/chapter/all/track on a
REPEAT during playback to select
a
repeat mode.
Slow Motion
1.
play
can
with
possible
Video CDs.
during Repeat Chapter
repeat playback cancels.
once
3D Surround
To
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
Random
1.
Press RANDOM
during playback. The
automatically begins random playback
RANDOM appears
2.
Press RANDOM
on
the TV
again
unit
and
screen.
1.
Press DISPLAY
2.
Use 3
Tip:
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround
SKIP >
during random playback, the unit
(track) and resumes random playback.
selects another title
4 to select the sound
The sound
to normal.
3.
By pressing
or
during playback.
effect, select "Normal".
Time Search
Note:
On
a
setup
(See
Video CD with
menu
to
"PBC"
on
Repeat
To
1.
2.
3.
use
PBC, You
must set PBC to Off
on
the
1.
the random function
page
a
playing
at any chosen time
2.
on
Press DISPLAY
box shows the
14).
A-B
repeat
To start
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon
and "-:--:--" appears.
sequence.
Press A-B at your chosen
appears briefly on the TV
3.
starting point.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
A
*
end
point.
screen
and the
the
required
start time in
seconds from left to
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
"
screen.
Press A-B
Press A-B
"
Input
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
17
Zoom
Use
to
zoom
Press ZOOM
1.
the video
enlarge
image.
during playback
still
or
playback
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
1600% size
fit mode
screen
→
→
the
can
the contents of DVD discs: Menus
bBvVbuttons to
the way the
when
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Use the bBvVbuttons to
zoomed
4.
To
1.
Normal, Enhanced,
move
through
2.
the
Press TITLE. If the current title has
appears
menu
may appear.
normal
playback,
The
menu
on
the
menu
screen.
press CLEAR.
3.
menu, the
Otherwise, the disc
offers features such
spoken language and
chapters for the title.
picture.
resume
your selection.
Then press ENTER.
and Maximum.
3.
highlight
Title Menu
change
screen
Checking
100% size
Screen fit mode:
You
DVD Features
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
subtitle
a
angles,
as camera
options,
and
Press TITLE to exit.
Notes:
Zoom may not work
?
?
on some
DVDs.
Screen fit mode is available for
Disc Menu
playing
the DVD disc and
Press DVD MENU and the disc
movie file.
Press DVD MENU
menu
is
displayed.
to exit.
again
Marker Search
Camera
To enter
You
Marker
a
start
can
If the disc contains
from up to nine memorized
marker, press MARKER at the
playback
To enter
points.
desired
point
the TV
screen
a
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
on
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
Press ENTER and
marked
scene.
b / B to select
playback
or
a
marker
You
on
Tip:
The
indicator will blink
angle
recorded at different
switching
is
angles
on
the TV
as an
during scenes
that angle
screen
indication
possible.
starts from the
Changing
the Audio
Language
Or, Press CLEAR and the marker
any marker by
the marker search menu.
can
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
clear.
number is erased from the list.
4.
recorded at different
Marked Scene
number that you want to recall
3.
scenes
camera
markers.
To Recall
Angle
play
inputting
Press AUDIO
its number
different
repeatedly during playback
audio language or audio track.
to hear
a
Subtitles
Pause
1.
2.
18
Press PAUSE/STEP
To return to
during playback.
playback,
press PLAY.
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to
see
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
as
compatibility
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
or
ENTER and
playback
?
?
starts.
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
Track2
Track3
?
Track4
File
an
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
system.
should have
a
incorporate
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
see
a
folder, and press ENTER
the folder contents.
Press v / V to select
ENTER.
a
track then press PLAY
or
starts.
Playback
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
1/12
List
Program
1-Music1
Operation
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
ID3 TAG
?
When
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
always
be
sought
from the
copyright
owner.
playing
a
file
containing
information such
as
track
titles, you can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
?
If there is
no
information, "NO ID3 TAG" appear
on
the
display.
Tips:
?
If you
are
in
a
file list
return to the Folder
on
list,
the MUSIC
use
menu
the v / V to
and want to
highlight
and
press ENTER.
?
Press DVD MENU to
?
On
move
to the next page.
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
on
top of the
menu
is
highlighted.
19
Audio CD and MP3 / WMA Disc
Random
Features
1.
Press RANDOM
during playback.
Playback begins immediately and
appears
Pause
1.
2.
Press PAUSE/STEP
the
on
RANDOM
menu screen.
To return to normal
until
repeatedly
during playback.
Random
playback, press RANDOM
RANDOM disappears from the
menu screen.
2.
To return to
press
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
Tip:
By pressing
Moving
1.
to another Track
Press SKIP
(.
>) briefly during playback
track or to return to the beginning
or
Press SKIP . twice
previous
3.
You
Repeat
can
any track
Repeat
by inputting
To
2.
Press A-B
1.
can
a
its number.
track/all
on a
Press REPEAT when
disc.
playing
?
?
again
The
point.
a
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
disc. The
menu screen.
repeat
Track:
a
desired
repeat mode.
the current track
repeats
All: repeats all the tracks
Off(No display):
does not
on a
disc.
play repeatedly.
To
If you press SKIP (>) once
the repeat playback cancels.
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
1.
Note:
Press AUDIO
during Repeat Track playback,
2.
1.
Press SCAN
2.
Press SCAN
(m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
3.
To exit SEARCH
(m
or
M) during playback.
mode, press PLAY.
on
the
menu screen.
To return to normal
until
menu screen.
Search
during playback.
"3D SUR." appears
repeatedly
20
at your chosen end
3D Surround
Press REPEAT to select
?
a
repeatedly.
icon appears.
2.
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
repeat
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Track/All/Off
play
resumes
playback, the unit
random playback.
Repeat
3.
You
random
A-B
1.
to go back to the
briefly
track.
play
during
selects another track and
to go to the next
of the current track.
2.
SKIP >
playback, press AUDIO
"3D SUR." disappears from
the
5.
Programmed Playback
1.
contain 30 tracks.
can
Insert
"Program"
6.
disc.
a
or
ENTER to start.
Playback begins
programmed the tracks.
the order in which you
Playback stops after all of the tracks
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program
Press PLAY
To
list have
played
on
in
the
once.
normal
playback from
programmed playback, select a track of
AUDIO CD (or MUSIC) list and then press
resume
PLAY.
Audio CD
AUDIO CD
2.
MP3/WMA Discs:
or
or
MUSIC
menu
Repeat Programmed
appears.
Press PROGRAM.
1.
The
mark will appear to the right of the word
"Program" on the right side of the menu screen.
2.
to exit the
Edit mode.
Program
then the
mark will
disappear
MUSIC
0:00:00
1/12
List
Tr ack5
Tr ack2
Tr ack7
1-Music1
4-Music4
Tr ack3
Tr ack4
2-Music2
6-Music6
Tr ack4
Tr ack1
3-Music3
1-Music1
4-Music4
Tr ack6
5-Music5
Tr ack7
6-Music6
Clear All
DISPLAY
Audio CD Menu
PROGRAM
Info
repeats the current track
All: repeats all the tracks on programmed list.
Off(No display):
Erasing
Edit
is
playback
The program menu appears. Press
PROGRAM again and hold it down for a few
seconds to exit the
does not
play repeatedly.
Video CD with
menu.
PBC, you
the
once
during Repeat
Track
playback,
the
on
"Program"
List
2.
Press CLEAR.
Repeat
to
erase
additional tracks
Operation
the list.
the
Complete Program
1.
Press B to
2.
Use v / V to select "Clear
move
to the
List
"Program"
list.
the
"PBC"
programmed playback (See
Track from
Use vVBto select the track that you wish to
erase from the Program list.
Erasing
must set PBC to Off
a
1.
on
Note:
page
repeat mode.
repeat playback cancels.
stopped.
use
desired
Track:
If you press >
MP3/WMA Menu
Video CD: Press PROGRAM while
to
a
Clear All
7-Music7
PROGRAM Edit
menu
repeat
2-Music2
Tr ack5
setup
disc. The
Note:
E
Program
Tr ack1
a
a
1/12
List
E
Program
Tr ack8
On
?
?
AUDIO CD
playing
Press REPEAT to select
?
again,
0:52:07
Press REPEAT when
icon appears.
Note:
Press PROGRAM
Tracks
on
All", then press ENTER.
14).
Note:
VIDEO CD
List
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
The programs
E
are
also cleared when the disc is removed.
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
playing
on
the
21
Viewing
this DVD
Using
JPEG Disc
a
Player
view discs with JPEG
you
can
files.
1.
Insert
disc and close the
a
on
appears
the TV
JPEG
Zoom
tray. The PHOTO
menu
screen.
Use
zoom
(see
page
To rotate
enlarge
18)
picture
photo image.
JPEG
picture
Press v / V
PHOTO
the
to
during showing
clockwise
or
to rotate the
picture
a
counter clockwise.
Preview
List
To listen to MP3/WMA music
JPEG Folder 1
JPEG Folder 2
watching picture
JPEG Folder 3
JPEG
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
You
JPEG Folder 7
can
JPEG Folder 8
display
files while
music files recorded
1.
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Press DVD MENU to
?
There
?
move
or
Press TITLE to
3.
Press v / V to select
4.
Use B to select
top
of the
disc.
the two
types of file in
display
a
PHOTO
photo
menu.
file.
icon then press ENTER.
starts. The playback will continue until
pressed.
Tip:
to
move
To listen to
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
to the next page.
JPEG disc
limited
is
menu
compatibility
with this
player
is
follows:
as
to
?
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
on
containing
2.
a
PHOTO word
same
PLAY.
:
Speed options
>>>
(Fast), >> (Normal), and > (Slow).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
On
the
to MP3/WMA
player.
STOP is
three Slide
are
the
Playback
Tips:
?
Insert the disc
on
listening
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an on-
Depending
screen
highlighted.
display
after several
minutes,
some
of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
---
?
Press
RETURN, information of file is hidden.
2048
Slide Show
JPEG
?
Use vVbBto
highlight
the
(Slide Show)
Still Picture
1.
The
player
will
now
during
Ensure that all the selected files have the
slide show.
PAUSE/STEP
show, press PLAY
extensions when
or
press
?
Moving
Press SKIP
JPEG
(. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
22
copying
into the CD
".jpg"
layout.
If the files have
rename
again.
to another File
the disc
?
go into PAUSE mode.
To return to the slide
on
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
2.
The total number of files and folders
?
JPEG
Press PAUSE/STEP
and burn another disc.
should be less than 650.
then
press ENTER.
pixels
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
player.
JPEG image
Even
though
files in
Maintenance and Service
Refer to the information in this
contacting
a
Please
before
service technician.
the Unit
Handling
When
chapter
shipping
the unit
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping
the exterior surfaces clean
Do not
?
the
save
spray
use
near
volatile
liquids
insecticide
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
as
the unit.
Do not leave rubber
?
such
on
the unit
To clean the
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
23
Additional Features
Last Scene
Video Mode
?
Memory
With certain
discs, the playback picture may be
flickering
Dot Crawl is shown
That
This
player
memorizes last
that is viewed. The last
scene
from the last disc
memorized,
the
scene
is
a
disc that has the
automatically
means
Vertical
interpolation
does not memorize the
recalled.
?
switch off the
player
before
commencing
of
a
Screen Saver
?
The
appears when you leave the DVD
mode for about five minutes. If the
screen saver
player
in
Stop
Screen Saver is
displayed
Player automatically turns
for five
minutes,
De-interlace is
To
the video
change
mode, press and hold
the DVD
Video mode
MODE1
?
itself off.
→
change
MODE2
→
during
disc
playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
disc if you
to play the disc.
scene
lines.
scene
Note:
player
or
straight
video mode.
DISPLAY about 3 seconds
This
on
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
scene
if you remove
off the player. If you load
or
not
remains in memory
the disc from the player or switch
even
Setting
sequence:
MODE3
→
MODE1
If you turn off the power, the video mode will be
back to initial state (MODE1).
Tip:
Detailed
MODE1: The
or
video
for Video Modes
material of the DVD video (film
Descriptions
source
material)
material
is determined from disc information.
MODE2: Suitable for
playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
Note:
The video mode
Progressive
setting only
works when the
Scan mode is set to "On" in the
Setup
menu.
System Select
You must select the
TV
appropriate system mode for
DISC appears in the display
your
system. If NO
window, press and hold PAUSE/STEP for more than 5
seconds to be able to select a system (PAL, NTSC, or
AUTO).
24
Using
VOICE: If you wish to sing a duet with the
recorded karaoke singer, select a voice you
the Karaoke Function
1.
Load
2.
Set the MIC VOL control to the minimum level to
a
karaoke disc.
desire.
prevent acoustic feedback (e.g.
sound)
before
Connect
3.
a
connecting
microphone
loud
howling
microphone.
the
a
V1
Voice1
Voice1
V2
Voice2
Voice2
V1+V2
Voice1
Voice2
Off
None voice
None voice
to MIC socket.
Note:
If
a
microphone
is not connected the karaoke
menu
will not
appear.
4.
5.
EFFECT: You
Press PLAY to start
Adjust
Press KARAOKE
6-
an
display changes
as
or
→
HARMONY
KEY: You
can
→
FLANGE
change
the
→
CHORUS
the
key by pressing
Note:
desired item
MELODY, VOICE, EFFECT
the
pressed,
1/2 buttons.
appears.
Use 3/4 to select
The
sing song.
option follow steps
Off
a
during playback.
menu
Special Effects. Each time
Special Effect changes as
can use
shown below.
MIC VOL control and then
KARAOKE
7.
1/2 is
playback.
If you want to set KARAOKE
8.
6.
Output
Left speaker
Right speaker
Voice Select
(ECHO,
KEY).
shown in the chart below.
Controlling the key
amplifier (receiver)
when DVD
player
is connected to
with
mute the sound of the
digital audio connection, may cause
front left/right speakers connected with
amplifier (receiver).
In that case, you must change the sound mode of the
amplifier (receiver) for the output of the speakers.
9.
Press KARAOKE to exit the KARAOKE
menu.
Notes:
?
The
?
The karaoke feature functions
microphone may
playback. (ex. slow)
compatible
?
For
only
Operation
during special
with karaoke-
discs.
The VOICE and MELODY
some
?
not be available
menus
may not be available
on
karaoke discs.
more
details, refer
to the information
supplied
with the
disc.
8.
Use 1/2 to
adjust
value of the item
selected.
ECHO: You
pressing
can
adjust
the echo volume
by
the 1/2 buttons.
MELODY: If you wish to sing only to the backing
band or orchestra unaccompanied by a vocal
guide melody,
set MELODY to Off.
25
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
26
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Republic
AF
Area
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
SG
SK
UG
Tr oubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
Plug the power
securely.
The power is on, but
the DVD player does
?
No disc is inserted.
?
Insert
picture.
(Check
that the DVD
audio CD indicator in the
not work.
No
disc.
a
cord into the wall outlet
?
The TV is not set to receive DVD
?
lit.)
Select the
appropriate
mode
signal output.
?
window is
The video cable is not connected
or
display
video
input
the TV.
on
?
Connect the video cable
?
Select the correct
securely.
securely.
No sound.
?
The
connected with the
equipment
audio cable is not set to receive DVD
audio receiver
?
?T
The AUDIO
?
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
?
The DVD
not start
does
Insert
player
playback.
?
An
options
position.
set to the
level is set.
rating
urn on
?
The remote control
does not work
The remote control is not
the remote
properly.
?
sensor on
the
pointed at
DVD player.
type, color
(Check the disc
system, and regional code.)
Cancel the
rating
playable
a
disc.
function
or
change
level.
rating
Point the remote control at the remote
?
sensor
The remote control is too far from the
DVD
connected with
Set the
the
?
equipment
the audio cable.
disc is inserted.
unplayable
The
are
the
so
The power of the equipment connected
with the audio cable is turned off.
wrong
?
mode of the
you can listen to the
sound from the DVD player.
signal output.
?
input
of the DVD
Operate
?
the DVD
player.
player.
the remote control closer to
player.
Specifications
DIGITAL OUT
General
Power
Power
requirements:
AC 110-240 V
,
(COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
50/60 Hz
DIGITAL OUT
8 W
consumption:
3 V
Dimensions
(Approx.):
360x35x242mm(WxHxD)withoutfoot
Weight (Approx.):
1.7
75
x
1
System
kg
Laser:
Semiconductor
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
(p-p),
(OPTICAL):
Ω, Optical onnector
laser, wavelength
Signal system:
5 % to 90 %
650
PAL/NTSC
Outputs
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
VIDEO OUT:
CD:8Hzto20kHz
1.0 V
(p-p),
75 Ω, sync
negative,
RCA
jack
x
1
Signal-to-noise
(Y) 1.0 V (p-p), 75 Ω, negative
(C)0.3V(p-p)75Ω
ratio:
More than 100 dB
S-VIDEO OUT:
sync, Mini DIN
4-pin
x
1
nm
(ANALOG
OUT connectors
only)
Harmonic distortion: Less than 0.008%
Dynamic range:
More than 95 dB
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
(DVD/CD)
1
AUDIO OUT:
2.0Vrms(1KHz,0dB),600Ω, RCAjack(L,R)x1
Note: Design and specifications
are
subject
to
change prior
notice.
27
2.1CH
Speaker System
OWNER'S MANUAL
MODEL
NE9421P
:
(Sub woofer: NW-930AT
Speaker: NS-915)
Table of Contents
Speakers...........................30
Antenna
(Aerial) Connections
2.1 Channel
Speakers
.
.
.
.
Connections
.
.
.
.
.
.
.
.
.
.
.31
.31
ConnectingtoDVDplayer...............31
Connecting
to an
optional equipment
PresettingtheRadioStations.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.31
.32
ListeningtotheRadio.................32
Troubleshooting.....................33
Specifications.......................33
Speakers
1
1
Remote Sensor
Point the subwoofer remote control here.
2
Shows the current status of the
2
3
4
7
4
5
-
VOLUME
Adjusts
3
8
window
Display
-
+
volume of
TUNING
speakers.
+
Selects the radio
5
player.
frequency.
MEMORY
Selects and memorizes FM stations.
6
6
INPUT
Selects the DVD/ AUX/ TUNER mode.
7
POWER
Switches the subwoofer ON and OFF.
8
Power indicator
Lights
green when the Subwoofer is
turned
on.
9
FM antenna
jacks
Connect the FM antenna cable to the
9
rear
10
of subwoofer.
VOLTAGE SELECT SWITCH
:
OPTIONAL
11
15
Main POWER switch
Switches the main power of subwoofer
ON and OFF.
12
AC Power Cord
Plug
14
13
10
into the power
source.
SPEAKER Connectors
Connect the left and
to
these terminals.
11
13
right speakers
14
12
RESET
This button is used to solve the
as
problem
following symptom;
?
When the power can not on, even if
power cord is connected to the outlet.
?
When the window
display
does not
display.
?
*
10
When the subwoofer does not
normally.
Setting
the
voltage (OPTIONAL)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power
supplied before connecting the AC power cord.
15
DVD and AUX IN
(L/R) jacks
Connect the audio
DVD
player
and
an
output cable from the
external unit
system, TV/Monitor, VCR etc.)
terminals.
30
operate
(Audio
to these
Antenna
(Aerial) Connections
Connect the
supplied
FM antenna for
listening
to the radio.
FM external
(aerial)
(not supplied)
antenna
FM 75
FM wire antenna
(supplied)
Note:
?
Be
?
After
sure
to
fully
connecting the FM
horizontal as possible.
2.1 Channel
Connecting
1.
to DVD
Player
cords
it
as
player
Right
AUDIO OUT
to the audio left and
jacks on
right in jacks
on
by matching
those of the cords.
To
keep
Connections
Speakers
your subwoofer (A).
Connect the speakers using the
(DVD)
3.
wire antenna,
Connect the Left and
the DVD
2.
extend the FM wire antenna.
enjoy
INPUT
1.
supplied speaker
the colors of the terminals and
(L, R).
the sound from the DVD
on
Connecting
player,
press
the remote control to select source of
the subwoofer to DVD.
2.
to an
optional equipment
Connect the Left and
Right AUDIO OUT jacks on
an optional equipment (VCR, CD Player, TV,
AUDIO, etc.) to the audio left and right in jacks
(DVD) on your subwoofer (A).
To enjoy the sound from an optional equipment,
press INPUT on the remote control to select
source of the subwoofer to AUX.
Note:
--
Be
sure
terminal
cords
to match the
cord to the
appropriate
components: 3 to 3 and # to #. If the
reversed, the sound will be distorted and will
on
are
speaker
the
lack base.
--
--
--
If you
speakers with
adjust the volume carefully to
the speakers.
use
front
Do not disassemble the front
The sound is muted
low maximum
input rating,
avoid excessive
cover
during playing
of
back
output
on
supplied speaker.
a
disc recorded DTS.
A
R
L
AUDIO OUTPUT
VCR
or
optional equipment
31
the Radio Stations
Presetting
You
can
make
preset
50 stations of FM tuner. Before
tuning,
that you have turned down the volume to
the minimum.
to the Radio
Listening
1.
Press INPUT
2.
Press PRESET
repeatedly
to select FM tuner mode.
sure
(-)/(+) repeatedly
preset station you
1.
Press INPUT
2.
Select
repeatedly
to select FM tuner mode.
station you want by pressing
TUNER (-)/(+) buttons on the remote control.
-
to select the
want.
Each time you press the button, the unit tunes in
one preset station at a time.
a
3.
Adjust
in
Tuning
automatically
Press TUNING (-)/(+) for more than 0.5 second.
Scanning stops when the unit tunes in a station.
Tuning in manually
Press TUNING (-)/(+) briefly and repeatedly.
the volume
VOL
by pressing
repeatedly.
remote control
(-)/(+)
on
the
-
To listen to
non-preset radio stations
Use manual or automatic tuning in step
?
For automatic
?
Press MEMORY button
A
on
the sub woofer.
on
preset number will flash in the display window.
tuning,
press and hold TUNER
Press PRESET
to select the
(-)/(+)
To turn off the radio
preset number
remote control to select other
you want.
5.
Press MEMORY button
For your reference
?
If an FM program is
again.
The station will be stored.
6.
Repeat steps
1
(or 2)
Press ST/MN
to 5 to store other
Press and hold MEMORY button
on
modes(DVD
on
or
the
AUX).
that "STEREO"
be
no
disappears
in the
effect, but
stereo
Press ST/MN
again
to
?T
o
improve reception, reposition
the
supplied
antenna.
the subwoofer for
seconds, "CLEAR" appears in the display
window and then press MEMORY button
stations are deleted.
For your reference
If all stations have already been
again,
the
reception
is distorted
by
mono
reception
4-5.
preset number, follow the steps
noise.
Sound
?Y
Quality Adjustment
ou can
using
choose between 4 fixed sound
the EQ button
on
impressions
the remote control.
presets
Press and hold PRESET
number appears
or
(-)/(+)
until the desired
press it
repeatedly.
FLAT
linear
frequency
POP
response
more bass, more treble
less bass, less treble
CLASSIC
for orchestral music
ROCK
MUTE
Press MUTE to
temporarily stop
the sound.
The MUTE indicator flashes in the
32
if
memorized, "FULL"
To
the
Use ST/MN function to switch to
stereo
a
change
Note:
?
message will appear in the display window for
moment and then a preset number will flash.
preset
INPUT
restore the stereo effect.
To delete all the memorized stations
To recall
so
or
noisy
display window. There will
the reception will improve.
stations.
about two
(-)/(+)
the remote control.
Press POWER to turn the unit off
4.
on
left.
-
3.
2
display
window.
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
problem
before
service.
contacting
Cause
Symptom
The audio cables
No sound.
Correction
not connected
are
Connect the audio cable
securely.
securely.
Sound level is too low.
The power of the equipment connected
with the audio cable is turned off.
Turn
Speaker cords
securely.
Connect them
not connected
are
the audio cable.
Adjuts
Speaker wires
correctly.
Connect them
are
not connected
to
The remote control is not
does not work
remote
sensor
of the
pointed
DVD player.
at the
DVD
There is
an
obstacle in the
remote control and the
path of the
DVD player.
The batteries in the remote control
L, R (right)
higher
correctly,
than MIN.
that is L
(left)
to R.
Point the remote control at the remote
of the DVD
Operate
(7 m).
player.
securely.
the VOLUME to
sensor
The remote control is too far from the
connected with
equipment
The volume control is set to MIN.
The remote control
properly.
the
on
player.
the remote control within 23 ft
Remove the obstacle.
are
the batteries with
Replace
new ones.
exhausted.
Power switch in the
No Power
rear
panel
is turned
Turn the switch
on.
off.
Specifications
Speakers
Active subwoofer
Power
Power
Power
Refer to the back
requirements
Output
consumption
Inputs
Type
Impedance
Signal-to-noise
panel
30W
of the unit.
-
DVD, AUX
Way
Right Speakers
15W+15W
45W
1
Left and
1
Speaker
-
2
Way
2
Speaker
6Ω
6Ω
More than 69 dB
More than 69 dB
Frequency Response
25-180Hz
250
Sound Pressure Level
85 dB/W
85 dB/W
Rated
30W
15W
60W
30W
240x240x336mm
90x267x105mm
5.3
0.63kgx2
ratio
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
x
H
x
D)
(1 m)
kg
-
20,000 Hz
(1 m)
Accessory
Videocable.......................1
Audiocable.......................1
Speakerwires.....................2
FMAntenna.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
33
P/NO
:
3834RD0039S
Download PDF