LG | 98LS95A-5B | LG 98LS95A Owner’s Manual

OWNER’S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating the your set and retain it
for future reference.
98LS95A
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3LICENSES
4
ASSEMBLY AND
PREPARATION
4Accessories
6
Optional Accessories
7
Parts and Buttons
8
Connecting the Speakers
9
Connecting Wi-Fi Dongle
9
Connecting IR and Light Sensor
9
Portrait Layout
10 Connecting the Eye-Bolt Bracket
11
Attaching the Detachable Logo
12 How to Install the Guide Bracket
13 Installing on a Wall
14
REMOTE CONTROL
16
MAKING CONNECTIONS
16
19
20
Connecting to a PC
External Device Connection
Using the Input List
20ENTERTAINMENT
20 Using My Media
20
- Connecting USB storage devices
22
- Files Supported by My Media
25
- Viewing Videos
26
- Viewing Photos
26Information
26 File Manager
27
- Listening to Music
28 -Settings
29 Picture ID Settings
30
USER SETTINGS
30
30
31
35
36
39
40
Main Menu Settings
- Quick Settings
- Picture Setting
- Sound Settings
- Network Settings
- General Settings
Installing the LG Monitor Software
42TROUBLESHOOTING
44
PRODUCT SPECIFICATIONS
49
IR CODES
51
TO CONTROL MULTIPLE
PRODUCTS
51
51
51
52
54
Connecting the cable
RS-232C Configurations
Communication Parameter
Command Reference List
Transmission/Reception Protocol
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC
and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 8,656,183; 8,731,369; RE45,052.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc.
DTS, Inc. All Rights Reserved.
NOTE
••The warranty will not cover any damage caused by using the product in an excessively dusty
environment.
ENGLISH
LICENSES
4
ASSEMBLY AND PREPARATION
ENGLISH
ASSEMBLY AND PREPARATION
Accessories
Please check whether all the components are included in the box before using the product. If there are any
missing components, contact the retail store where you purchased the product. The illustrations in this manual
may differ from the actual product and accessories.
Remote Control,
Batteries (AAA) 2 EA
Power Cord
CD (Owner’s Manual)/
Card
HDMI Cable
Wi-Fi Dongle
(AN-WF500)
Eye-Bolt Bracket
(2 EA)
IR and Light Sensor
RS-232C Cable
DISPLAYPORT Cable
Stereo to
COMPONENT
Gender
M4 x L12 Screws (4 EA)
(For Eye-Bolt Bracket)
ASSEMBLY AND PREPARATION
5
••Always use genuine components to ensure safety and product performance.
••The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
••The accessories supplied with your product may vary depending upon the model.
••Product specifications or contents in this manual may be changed without prior notice due to
upgrade of product functions.
••SuperSign Software and Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest
software for your model.
ENGLISH
CAUTION
6
ASSEMBLY AND PREPARATION
ENGLISH
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the
product, and new accessories may be added. The illustrations in this manual may differ from the actual
product and accessories.
Speakers
SP-2200
Cable Holders/
Cable Ties
Screws
Diameter 4.0 mm x Pitch
0.7 mm x Length 8 mm
(including spring washer)
Screws
Diameter 4.0 mm x Pitch
1.6 mm x Length 10 mm
Speaker Kit
Media Player
Screws
Owner’s Manual
(supplied on CD-ROM) /
Card
Media Player Kit
NOTE
••Cable holder/Cable tie may not be available in some areas or for some models.
••Optional accessories are available for some models. If necessary, please purchase them separately.
ASSEMBLY AND PREPARATION
ENGLISH
Parts and Buttons
1
2
3
4
5
IR&LIGHT
SENSOR
6
Screen
Buttons
Input Connectors
No.
7
Description
1
Adjusts up and down.
2
Moves left and right.
3
Displays the current signal and mode.
4
Accesses the main menus, or saves your input and exits the menus.
5
Change the input signal.
6
Turns the power on or off.
8
ASSEMBLY AND PREPARATION
ENGLISH
Connecting the Speakers
- For certain models only.
1
Connect an input signal cable before
installing the speakers.
2 Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
3 Connect the speaker cables noting the
correct polarity. Use cable holders and cable
ties to organize the speaker cables.
NOTE
••Please turn off the power before removing
the cable. Connecting or removing the
speaker cable while turned on may result
in no sound.
ASSEMBLY AND PREPARATION
1
Attach the Velcro tape provided with the WiFi dongle to the back of the set.
Connecting IR and Light
Sensor
When you connect the cable to the product, the
feature for receiving remote control signals is
activated. The IR and light sensor is magnetic.
Attach it to the front edge of the product for use.
[Front]
2 Connect the Wi-Fi dongle and the set using
a USB cable and then attach the dongle to
the set before using.
IR&LIGHT
SENSOR
CAUTION
CAUTION
NOTE
••The signal strength of the IR and Light
sensor will decrease if the sensor is not
placed in front of the product.
NOTE
••Refer to the manual of the Wi-Fi dongle.
••Bluetooth is not supported.
••Refer to the Installation Menu for region
settings.
••The wireless reception may be affected by
the location of the product.
••If there is poor reception in the
recommended location, please change the
location before use.
••Use only the provided Wi-Fi dongle. Other
Wi-Fi dongles may not work properly.
Portrait Layout
When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when
facing the screen).
ENGLISH
Connecting Wi-Fi Dongle
9
10
ASSEMBLY AND PREPARATION
ENGLISH
Connecting the Eye-Bolt Bracket
The eye-bolt bracket is designed to be used to lift the set up. Attach the bracket to the product using the
two screws provided.
Installing in Landscape Position
Installing in Portrait Position
ASSEMBLY AND PREPARATION
11
Use one screw, inserted from behind, to attach the detachable logo to the monitor. You can position the
logo according to the monitor’s direction.
When the monitor is in the horizontal position
When the monitor is in the vertical position
ENGLISH
Attaching the Detachable Logo
12
ASSEMBLY AND PREPARATION
ENGLISH
How to Install the Guide Bracket
Attach the media player to the guide bracket with 4 fixing screws.
ASSEMBLY AND PREPARATION
CAUTION
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting
Bracket Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm
10 cm
To install your monitor on a wall, attach a wall
mounting bracket (optional part) to the back of
the monitor.
Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.
1. Use only screws and wall mounting brackets
that conform to VESA standards.
2. Screws which are longer than standard
length may damage the inside of the
monitor.
3. A non-VESA standard screw may damage
the product and cause the monitor to fall.
LG Electronics is not liable for any accidents
related to the use of non-standard screws.
4. Please use VESA standard as below.
••785 mm and above
* Fixing screws: D
iameter 8.0 mm x Pitch
1.25 mm x Length 14 mm
* Wall mounting screw spec. (M8 screw)
- Minimum ultimate tensile load :
Min. 12,100N (1,230 kgf)
- Proofing Load : Min. 8,840N (902 kgf)
••Disconnect the power cord before moving or
installing the monitor to avoid risk of electric
shock.
••If you install the monitor on a ceiling
or slanted wall, it may fall and result in
injury. Use an authorized LG wall mount
and contact your local dealer or qualified
personnel to assist with the installation.
••Do not over tighten the screws as this may
damage the monitor and void your warranty.
••Use only screws and wall mounting brackets
that meet the VESA standard. Any damage
or injuries caused by misuse or use of
improper accessories are not covered by the
warranty.
••To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the installation instructions. (This only
pertains to Australia and New Zealand.)
ENGLISH
Installing on a Wall
13
14
REMOTE CONTROL
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this
manual carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
the labels inside the compartment, and close the battery cover.
and
terminals to
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the
actual accessories.
CAUTION
••Do not mix old and new batteries, as this may
damage the remote control.
••Be sure to point the remote control toward the
remote control sensor on the monitor.
(POWER)
Turns the monitor on or off.
MONITOR ON
Turns the monitor on.
MONITOR OFF
Turns the monitor off.
1/a/A Button
Toggles between numerical and
alphabetical.
(Depending upon the model, this
feature may not be supported.)
ARC
Selects the Aspect Ratio
mode.
Volume Up/Down
Button
Adjusts the volume.
PSM
Selects the Picture Mode.
MUTE
Mutes all sounds.
ENERGY SAVING(
)
Adjusts the brightness of
the picture to reduce energy
consumption.
INPUT
Selects the input mode.
3D
This model does not support
this.
Number and Alphabet
buttons
Enters numerical or alphabetical
characters depending upon the
setting.
(Depending upon the model, this
feature may not be supported.)
CLEAR
Deletes the entered numerical
or alphabetical character.
(Depending upon the model, this
feature may not be supported.)
BRIGHTNESS Button
Adjusts the brightness of the
display. PAGE Function is not
supported in the this model.
(Depending upon the model, this
feature may not be supported.)
REMOTE CONTROL
15
ENGLISH
AUTO
HOME
Activates the Launcher.
SETTINGS
Accesses the main menus or
saves your input and exit menus.
OK
Selects menus or options and
confirms your input.
BACK
Allows you to move back one step
in the user interaction function.
Automatically adjusts picture
position and minimizes
image instability (available
for RGB input only).
(Depending upon the model,
this feature may not be
supported.)
W.BAL
This model does not support
this.
S.MENU
SuperSign menu key
(Depending upon the model,
this feature may not be
supported.)
Navigation Buttons
Scrolls through menus or
options.
Exit
Allows you to control various
multimedia devices to enjoy
multimedia simply by using
the remote control through the
SimpLink menu.
(Depending upon the model, this
feature may not be supported.)
ID ON/OFF
When the Picture ID number
matches the Set ID number, you
can control whichever monitor you
want in multi-display format.
Quit all OSD tasks and
applications.
TILE
This model does not support
this.
USB Menu Control
Buttons
Controls media playback.
16
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the
external device you want to connect. For more information about external device connections, see the
user manual provided with each device.
Connecting to a PC
The illustrations may differ from the actual accessories. Some of the cables are not provided.
This monitor supports the Plug & Play* feature.
IR&LIGHT
SENSOR
* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
(not
included)
(not
included)
(not included)
(not
included)
DP OUT
HDMI
DVI OUT
DVI OUT
ENGLISH
MAKING CONNECTIONS
MAKING CONNECTIONS
••For the best image quality, using the monitor with HDMI connection is recommended.
••To comply with the standard specifications of the product, use a shielded interface cable with a
ferrite core, such as a DVI cable.
••If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
••Sometimes red, green, or blue spots may appear on the screen. This is normal.
••Use a High Speed HDMI®/TM cable.
••If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require
you to manually change the default audio output to HDMI.
••If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
••You may experience compatibility issues if you use HDMI-PC mode.
••Make sure the power cable is disconnected.
••Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the
screen may not display or a connection error may occur.
••Recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
CAUTION
••Connect the signal input cable and tighten it by turning the screws clockwise.
••Do not press the screen with your finger for a prolonged period as this may
result in temporary distortion on the screen.
••Avoid displaying static images on the screen for a long period of time to
prevent image burn. Use a screensaver if possible.
••A wireless communication device near your monitor can affect the image.
ENGLISH
NOTE
17
18
MAKING CONNECTIONS
ENGLISH
HDMI (4K @ 60 Hz) input 1 (HDCP2.2), 2 (10 Bit)
HDMI (4K @ 60 Hz) input ports: When using HDMI (4K @ 60 Hz) input port 2 (10-bit), use the provided
HDMI cable. When using an HDMI cable that was not provided, please use a high-speed HDMI cable
(shorter than 3 meters). (Information may vary depending on the model.)
4K@60 Hz input supported formats
Resolution
Vertical frequency (Hz)
Color depth
HDMI1
HDMI2
8 bit
3840 X 2160p
59.94
60
8 bit
YCbCr 4:2:0
10 bit
YCbCr 4:2:0
­―
YCbCr 4:2:2
­―
YCbCr 4:4:4
­―
­―
RGB 4:4:4
­―
••HDMI specifications may vary depending on the input port. Check the specifications of each device
before connecting.
••HDMI input port 2 is best suited for 4K at 60 Hz (4:4:4, 4:2:2) to enjoy high definition video. However,
video or audio may not be supported depending on the specifications of the external devices. In that
case, please connect to another HDMI port.
NOTE
••DISPLAYPORT does not support Deep Color (YCbCr 4:2:0, YCbCr 4:2:2).
HDMI UHD Deep Colour
Remote Control (HOME)
HDMI UHD Deep Colour
••HDMI2 port supports UHD Deep Colour.
••If the device connected to HDMI2 also supports UHD Deep Colour, your picture may be clearer.
••However, if the device doesn’t support it, it may not work properly.
••In that case, connect the device to a different HDMI port or change the TV’s UHD Deep Colour setting
to OFF.
MAKING CONNECTIONS
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
IR&LIGHT
SENSOR
The illustrations may differ from the actual accessories. Some of the cables are not provided. For
the best picture and sound quality, connecting external devices to your monitor using HDMI cables is
recommended.
OR
USB
(not included)
Direct Connection/
Using the Router/
Using the Internet
Network
(not included)
(not included)
(not
included)
HD Receiver/DVD/VCR
HDMI
Camcorder/Camera/Gaming Device
NOTE
••If you connect a gaming device to the monitor, use the cable provided with the gaming device.
••It is recommended to use the speakers that are provided as optional accessories.
••Use a High Speed HDMI®/TM cable.
••High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.
ENGLISH
External Device Connection
19
20
ENTERTAINMENT
ENGLISH
Using the Input List
Remote Control (HOME)
Input Mode
Description
HDMI1
HDMI2
DISPLAYPORT
DVI
COMPONENT
You can watch content on a PC,
DVD player, Digital set-top box,
and other high definition devices.
ENTERTAINMENT
Using My Media
Connecting USB storage
devices
Connect a USB storage device such as a USB
flash memory or an external hard drive to the
display and use multimedia features.
Connect a USB flash memory or USB memory
card reader to the display as shown in the
following illustration.
OR
CAUTION
••Do not turn off the monitor or remove a
USB storage device when the My Media
screen is activated. This could result in
loss of files or damage to the USB storage
device.
••Back up files you have saved on a USB
storage device frequently, as loss or
damage to the files may be not covered by
the warranty.
ENTERTAINMENT
21
••Only a USB storage device can be recognized.
••A USB device does not work effectively when it is connected via a USB hub.
••A USB storage device using an automatic recognition program may not be recognized.
••A USB storage device using its own driver may not be recognized.
••The recognition speed of a USB storage device may depend on each device.
••Please do not turn off the display or unplug the USB storage device when the connected device is
working. If the USB storage device is suddenly disconnected, the stored files or the device itself may
be damaged.
••Please do not connect a USB storage device which was modified to work on a PC. The device may
cause the monitor to malfunction or the content fail to be played. Use only a USB storage device
which contains normal music, image or video files.
••A USB storage device formatted as a utility program not supported by Windows may not be
recognized.
••A USB storage device (over 0.5 A) which requires an external power supply must be connected to a
power supply separately. If it is not, the device may not be recognized.
••Please connect the USB storage device using the cable provided by the device manufacturer.
••Some USB storage devices may not be supported or operate smoothly.
••File alignment method of USB storage devices is similar to that of Window XP and filenames can
recognize up to 100 English characters.
••Back up important files regularly as data stored on a USB storage device may be damaged. We will
not be responsible for any data loss.
••If the USB HDD does not have an external power source, the USB device may not be detected. To
ensure the device is detected, connect the external power source.
- Please use a power adapter for an external power source. We do not provide a USB cable for an
external power source.
••If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use
up to four partitions or USB storage devices.
••If a USB storage device is connected to a USB multi-card reader, its volume data may not be
detected.
••If the USB storage device does not work properly, disconnect and reconnect it.
••Detection speed differs from device to device.
••If the USB storage device is connected in Standby Mode, the specific hard disk will automatically be
loaded when the display is turned on.
••The recommended capacity is 1 TB or less for a USB external hard drive and 32 GB or less for USB
memory stick.
••Any device with more than the recommended capacity may not work properly.
••If a USB external hard drive with an “Energy Saving” function does not work, try turning the hard drive
off and on again.
••USB storage devices below USB 2.0 are also supported but may not function correctly in the videos.
••A maximum of 999 sub-folders or files can be recognized under one folder.
NOTE
••Connecting guide for USB 3.0 :
••Some USB device may not work if it does not meet USB 3.0 standard. In this case, connect it to
USB IN 2 or USB IN 3 port.
••Total Internal memory is 3.68 GB, however it may vary due to the bad block issue.
ENGLISH
Tips for using USB storage devices
22
ENTERTAINMENT
ENGLISH
Files Supported by My Media
Supported External Subtitle Format
••*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
To use Select Play,
Remote Control (HOME)
Photos/ Videos/ Music
••Play Selection: plays back selected content.
To set Device Selection,
Remote Control (HOME)
Photos/ Videos/ Music
••Device Selection: import contents from the selected device.
ENTERTAINMENT
23
••ULTRA HD video: 3840 X 2160
••FULL HD Video
1920 X 1080: XSUB (Supports internal subtitles generated from DivX6)
••Your ULTRA HD monitor may not support HEVC encoded contents that are not officially supplied
by LG.
Supported Video Codec
Extension
.asf
.wmv
.wma
Codec
Videos
VC-1 Advanced Profile
Audio
VC-1 Simple and Main Profiles
Videos
DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg, MPEG-4 Part 2
Audio
MPEG-1 Layer I II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
LPCM, ADPCM, DTS
.mp4
.m4v
.mov
Videos
H.264 / AVC , MPEG-4 Part 2
Audio
AAC, MPEG-1 Layer III (MP3)
.3gp
.3g2
Videos
H.264/AVC, MPEG-4 Part 2
Audio
AAC, AMR-NB, AMR-WB
Videos
H.264 / AVC
Audio
HE-AAC, Dolby Digital
Videos
H.264 / AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II / MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
AAC
Videos
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Videos
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II / MPEG-1 Layer III (MP3), AAC
.dvix
.avi
.mkv
.ts
.trp
.tp
.mts
.m2ts
.vob
.mpg
.mpeg
.dat
ENGLISH
Supported Internal Subtitle Format
24
ENTERTAINMENT
ENGLISH
Supported Audio File
File Format
MP3
Item
Information
Bit rate
32 Kbps - 320 Kbps
Sample freq.
32 KHz - 48 KHz
Support
MPEG1, MPEG2, MPEG2.5, Layer2, Layer3
.wav
Support
PCM
.ogg
Support
Vorbis
.wma
Support
WMA
Supported Photo File
File Format
Format
Item
2D
(jpeg, jpg, jpe)
JPEG
yyMinimum : 64 x 64
yyMaximum: Normal Type: 15360 (W) x 8640 (H) / Progressive Type: 1920 (W)
x 1440 (H)
2D (png)
PNG
yyMinimum : 64 x 64
yyMaximum: 1920 (W) x 1080 (H)
2D (bmp)
BMP
yyMinimum : 64 x 64
yyMaximum: 1920 (W) x 1080 (H)
ENTERTAINMENT
25
Play video files on display. All of the saved video files are shown in your display.
To play video files on display,
Remote Control (HOME)
Videos
Tips for Playing Video Files
••Some subtitles created by users may not work properly.
••The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the
video and subtitle files must have the same name.
••Subtitles on an NAS (Network Attached Storage) device may not be supported depending on the
manufacturer and model.
••We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel
Motion Estimation).
••The file size limit is dependent on the encoding environment.
••It works only the above version of Window Media Audio V2.
••It’s not supported AAC Main Profile.
••Video files created by some encoders may not be played back.
••Video files in formats other than the ones specified here may not be played back.
••Playback of video files stored on the USB device that do not support High Speed, may not work
properly.
••The monitor supports DTS audio codec when the USB/HDMI video file playback.
NOTE
••When restarting a video file after stopping it, you can play from the point at which it was stopped.
••Only 10,000 sync blocks can be supported within the subtitle file.
••When playing a video, you can adjust the picture size by pressing the ARC button.
••Korean subtitle is supported only when the OSD menu is in Korean.
••The code page options may be disabled depending on the language of the subtitle files.
••Select the appropriate code page for the subtitle files.
ENGLISH
Viewing Videos
26
ENTERTAINMENT
ENGLISH
Viewing Photos
File Manager
The displays on the screen may differ from the
model.
You can move, copy or delete files.
Viewing image files
Remote Control (HOME)
Photos
To move, copy, or delete files
Remote Control (HOME)
••You can move or copy files or folders from
internal to external memory.
••You can move or copy files or folders from
external to internal memory.
••You can delete files or folders from internal
or external memory.
NOTE
Information
To check the basic information of Signage
Remote Control (HOME)
You can see the basic information on Signage.
You can also switch to Smart Energy Saving
Mode or configure Fail Over settings. (You can
only switch to Smart Energy Saving Mode
when Energy Saving Mode is set to Off.)
••Those files bigger than internal remaining
memory aren`t allowed to be copied or
moved to the internal memory.
••You cannot copy or move a file to the
internal storage if the file size is larger than
the available free space of the internal
storage.
ENTERTAINMENT
27
Viewing music files
Remote Control (HOME)
Music
NOTE
••Files with unsupported extensions are not displayed.
••If a file is invalid, a broken image and the message ‘Unrecognizable file’ are displayed.
••Damaged music files are displayed as 00:00 and will not be played.
••A music file downloaded from a paid service with copyright protection will not play, and inappropriate
information may be displayed during playback.
••You can use
,
,
,
,
buttons on the remote control also in this mode.
••You can use the
button to select the next track and the
button to select the previous track.
••If you press the
button within 5 seconds after playing the song, you will return to the previous
song; if you press the same button after 5 seconds, you will return to the start of the song.
ENGLISH
Listening to Music
28
ENTERTAINMENT
ENGLISH
Settings
You must register your product to play a DRM-protected DivX video.
In order to register/deregister purchased or rented DivX ® VOD contents
Remote Control (HOME)
Settings
DivX ® VOD
In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit
DivX registration code from your device at www.divx.com/vod.
••Registration: view the registration code of your display.
••Deregistration: cancel the registration.
NOTE
•• While you are checking the registration code, some buttons may not work.
•• If you use the DivX registration code of another device, you cannot play rented or purchased DivX
files. Use only the DivX registration code assigned to your product.
•• Video or audio files that are not converted using the standard DivX codec may be corrupted or not
play.
•• The DivX VOD code allows you to activate up to 6 devices under one account.
•• After deregistration, you must register your device again to see DivX® VOD contents.
To Set a Signage Name
In order to play purchased or rented DivX® VOD contents, you should register your device with 20 digit
DivX registration code from your device at www.divx.com/vod
You can also set the name by pressing the Remote Control (SETTINGS)
SIGNAGE NAME.
Network
ENTERTAINMENT
29
Picture ID is used to change the settings of a
specific set (display) using a single IR receiver
for multi-vision. Communication is possible
between a monitor with an IR receiver and
other monitors using RS-232C cables. Each
monitor is identified by a Set ID. If you assign
the Picture ID using the remote control, only
displays with matching Picture ID and Set ID
can be controlled remotely.
3 Assign the Set ID to the selection of your
choice.
••A set with a different Set ID from the Picture
ID cannot be controlled by IR signals.
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
REMOTE
CONTROL IN
1
Assign the Set ID to the installed monitors
as shown below.
IR and Light Sensor
RS-232C Cables
PICTURE ID ON [2]
2 Press the red ON button on the remote
control to assign the PICTURE ID.
NOTE
••If Picture ID is set to 2, only the upper right
monitor, which has a Set ID of 2, can be
controlled by IR signals.
••If you press the green OFF button for
PICTURE ID, the Picture IDs for all
monitors are turned off. If you then press
any button on the remote control, all
monitors can be controlled by IR signals
regardless of Set ID.
••With PICTURE ID ON, you can only
increase the picture ID by 1. You cannot
decrease it.
ENGLISH
Picture ID Settings
30
USER SETTINGS
ENGLISH
User Settings
Main Menu Settings
Quick Settings
Configures frequently used settings menus.
To turn your monitor on or off automatically
Remote Control (SETTINGS)
Quick
On Timer/Off Timer
You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer, select Off.
To set the backlight and contrast automatically
Remote Control (SETTINGS)
Quick
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save
energy.
••Off: disables the Smart Energy Saving function.
••On: enables the Smart Energy Saving function.
USER SETTINGS
31
To Select Picture Mode
Remote Control (SETTINGS)
Picture
Picture Mode
Select the picture mode that is best suited to the video type.
••Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and
sharpness.
••Standard: adjusts the video image for a normal environment.
••APS: reduces power consumption by adjusting the brightness of the screen.
••Cinema: optimizes the video image for watching movies.
••Sports: optimizes the video image for watching sports. Even fast actions such as kicking or throwing
a ball are rendered clearly on the screen.
••Game: optimizes the video image for playing videogames.
••Photo: This mode is optimized for viewing pictures. It displays photos smoothly while minimizing the
loss of the original photo quality.
••Expert 1/Expert 2: allows an expert, or anyone interested in high quality pictures, to manually tune
the picture for the best picture quality.
NOTE
••Depending on the input signal, the available picture modes may differ.
••Expert is an option that allows a picture quality expert to fine-tune the picture quality using a
specific image. Thus, it may not be effective for a normal picture.
ENGLISH
Picture Setting
32
USER SETTINGS
ENGLISH
To fine-tune the picture mode
Remote Control (SETTINGS)
Picture
Picture Adjust
••Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value
is to 100, the brighter the screen is.
••Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value
is to 100, the greater the difference is.
••Brightness: adjusts the overall brightness of the screen. The closer the value is to 100, the brighter
the screen is.
••Sharpness: adjusts the sharpness of the edges of objects. The closer the value is 50, the clearer and
the sharper the edge becomes.
••H Sharpness: adjusts the sharpness of the contrast edges on the screen from a horizontal point of
view.
••V Sharpness: adjusts the sharpness of the contrast edges on the screen from a vertical point of view.
••Color: softens or deepens the tints on the screen. The closer the value is 100, the deeper the colors
become.
••Tint: adjusts the balance between red and green levels displayed on the screen. The closer the value
is to Red 50, the deeper the color red becomes, and the closer the value is to Green 50, the
deeper the color green becomes.
••Color Temperature: adjusts the tints of the screen to evoke feelings of warmth or coolness.
••Advanced Control/Expert Control: customizes the advanced options.
Dynamic
Contrast
Optimizes the difference between the light and dark parts of the screen according to the
brightness of the image.
Super
Resolution
Sharpens the blurry or indistinguishable parts of the picture.
Color Gamut
Selects the range of colors to display.
Dynamic Color
Adjusts the tint and saturation of the image for a more vivid and lively display.
Edge Enhancer
Provides much sharper and clearer edges to the picture.
Color Filter
Accurately adjusts color and tint by filtering a specific color area of RGB space.
Preferred Color
Adjusts the skin tint, grass tint, and sky tint to your preference.
Gamma
Adjusts the medium brightness of the image.
White Balance
Adjusts the overall tint of the picture to your preference.
In Expert mode, you can fine-tune the picture using the Method/Pattern options.
Color
Management
System
Experts use the color management system when they adjust the colors by using the test
pattern. The color management system allows you to make an adjustment by selecting from
among 6 different color spaces (Red/Yellow/Blue/Cyan/Magenta/Green) without affecting
other colors. You may not see tints change in a normal picture even after adjustment.
NOTE
••Depending on the input signal or the selected picture mode, the available options may differ.
USER SETTINGS
33
Noise
Reduction
Removes irregularly generated tiny dots for a clear picture.
MPEG Noise
Reduction
Reduces the noise produced while creating digital video signals.
Black Level
Adjusts the black level of the picture to correct the brightness and contrast of the picture.
Real Cinema
Optimizes the video image for a cinematic look.
TruMotion
Displays fast-moving pictures with optimal picture quality.
-Off: Turns off the TruMotion.
-Smooth: displays fast-moving pictures smoothly.
-Clear: displays fast-moving pictures clearly.
-User: set de-judder manually.
*De-judder: adjusts judder on the screen.
NOTE
••You can adjust advanced settings only in the User mode.
••Reset: resets the picture settings.
To set the aspect ratio,
Remote Control (SETTINGS)
Picture
Aspect Ratio
Changes the aspect ratio to view the image in its optimal size.
••16:9: displays the image with a 16:9 aspect ratio.
••Just Scan: displays the image in the original size without cutting off the edges.
Original is available in HDMI (720p or higher) mode.
••Set By Program: automatically changes the aspect ratio to 4:3 or 16:9 depending on the input video
signal.
••4:3: displays the image with a 4:3 aspect ratio.
••Zoom: expands the image to fit to the width of the screen. The top and bottom of the image may be
cropped.
••Cinema Zoom: enlarges the image to have a cinemascope ratio of 2.35:1 without distortion.
ENGLISH
••Picture Options: customizes the picture options.
34
USER SETTINGS
ENGLISH
CAUTION
••If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become
a permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
••If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed
area of the screen.
••The options may differ Depending upon the model.
••Depending on the input signal, the available aspect ratio may differ.
••You can select only 4:3 and 16:9 aspect ratios in HDMI1-PC/ HDMI2-PC/ DISPLAYPORT-PC/ DVIPC input mode.
To use the Energy Saving function
Remote Control (SETTINGS)
Picture
Energy Saving
Reduces power consumption by adjusting the brightness of the screen.
••Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only
with certain models.)
••Off: disables the Energy Saving mode.
••Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level
specified for your monitor.
••Screen Off: turns off the screen. You will only hear audio. You can turn on the screen again by
pressing any button on the remote control except the power button.
To use the Smart Energy Saving function
Remote Control (SETTINGS)
Picture
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save
energy.
••Off: disables the Smart Energy Saving function.
••On: enables the Smart Energy Saving function.
To run a Picture Test
Remote Control (SETTINGS)
Picture
Picture Test
Run a Picture Test to check that picture signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Test Picture, check
connected external devices.
USER SETTINGS
35
To select a Sound Mode
Remote Control (SETTINGS)
Sound
Sound Mode
The best sound quality will be selected automatically depending on the video type currently being
watched.
••Standard: this sound mode works well for content of all types.
••News: optimizes sound for watching news.
••Music: optimizes sound for listening to music.
••Cinema: optimizes sound for watching movies.
••Sports: optimizes sound for watching sports.
••Game: optimizes sound for playing videogames.
To use the Sound Effects function
Remote Control (SETTINGS)
Sound
Sound Effects
••Clear Voice ll: enjoy clearer sound with the three-level adjustment.
••Equalizer: manually adjust sound by using the equalizer.
••Balance: adjust the output volume for the left speaker and the right speaker.
••Reset: reset the sound settings.
To select a Volume Increase Rate
Remote Control (SETTINGS)
Sound
Volume Increase Rate
you can set the volume range by selecting any of Low/ Medium/ High.
To sync audio with video
Remote Control (SETTINGS)
Sound
AV Sync. Adjust
••Speaker: adjusts the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. From the
default value, the closer the value is to -, the faster the sound output becomes, and the
closer the value is to +, the slower the sound output becomes.
••Bypass: audio coming from external devices without delay. Audio may be outputted earlier than video
due to the processing time for video that is inputted into the monitor.
Setting up the speaker output
Remote Control (SETTINGS)
Sound
Speaker
Analog
You can hear sound through the analog speakers connected to your monitor. (* The monitor speaker is
sold separately.) No signal is transmitted from the optical port.
Remote Control (SETTINGS)
Sound
Speaker
Optical
A signal is transmitted from the optical port. If you use this setting, no sound will come through the
analog speakers connected to your monitor.
ENGLISH
Sound Settings
36
USER SETTINGS
ENGLISH
To Run a sound test
Remote Control (SETTINGS)
Sound
Sound Test
Run a sound test to check that sound signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Sound Test, check
connected external devices.
Network Settings
To Set a Signage Name
Remote Control (SETTINGS)
Network
Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen
keyboard.
To Set Your Network
Remote Control (SETTINGS)
Network
Wired Connection (Ethernet)
Connecting to a wired network: connect the display to a Local Area Network (LAN) via the LAN port
as shown in the following illustration and set up the network settings. Only wired network connections
are supported. After making a physical connection, a small number of networks may require the display
network settings to be adjusted. For most networks, the display will automatically make a connection
without any adjustments. For detailed information, contact your Internet provider or consult your router
manual.
To Set Your Wireless Network
Remote Control (SETTINGS)
Network
Wi-Fi Connection
If you have set the display up for a wireless network, you can check and connect to the available
wireless Internet networks.
••Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless
network.
••Connect via WPS PBC: Connects easily when the button of a wireless AP supporting PBC is
pressed.
••Connect via WPS PIN: Connects easily when the PIN of the wireless AP that you wish to connect to
is entered in to the AP configuration webpage.
••Advanced Settings: If you input the information of network directly, you can enter a wireless network.
If there is no wireless network available, click Advanced Settings. You can add a network.
USER SETTINGS
37
Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
Many network connection problems during set-up can often be fixed by re-setting the router or modem.
After connecting the display to the home network, quickly power off and/or disconnect the power cable
of the home network router or cable modem, then power on and/or connect the power cable again.
Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet
service may be limited by the applicable terms of service. For details, contact your ISP.
LG is not responsible for any malfunction of the display and/or the Internet connection feature due
to communication errors/malfunctions associated with your Internet connection, or other connected
equipment.
LG is not responsible for problems with your Internet connection.
You may experience undesired results if the network connection speed does not meet the requirements
of the content being accessed.
Some Internet connection operations may not be possible due to certain restrictions set by the Internet
Service Provider (ISP) supplying your Internet connection.
Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
LAN
Router
@
Internet
Internet
LAN
WAN
ETHERNET
Cable modem
NOTE
••If you want to access the Internet directly on your display, the Internet connection should always
be on.
••If you cannot access the Internet, check the network conditions from a PC on your network.
••When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.
••If you do not complete the network settings, the network may not function correctly.
CAUTION
••Do not connect a modular telephone cable to the LAN port.
••Since there are various connection methods, please follow the specifications of your
telecommunication carrier or Internet Service Provider.
••Network Setting menu will not be available until the display is connected to a physical network.
••Since there are various connection methods, please follow the specifications of your
telecommunication carrier or Internet Service Provider.
ENGLISH
Tips for Network Setting
38
USER SETTINGS
ENGLISH
Tips for Wireless Network Setting
Wireless networks can be subject to interference from other devices operating at a frequency of 2.4
GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from
devices with a frequency of 5 GHz, same as other Wi-Fi devices.
The surrounding wireless environment can cause the wireless network service to run slowly.
If you do not turn off the entire local home network, network traffic may occur on some devices.
For an AP connection, an access point device that supports wireless connection is required and the
wireless connection feature must be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
Check the SSID and security settings of the AP for AP connection. Refer to the appropriate
documentation for SSID and security settings of the AP.
Invalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly
or not operate properly. Install the devices correctly according to the appropriate manual and set the
network.
Connection method may differ according to the AP manufacturer.
USER SETTINGS
39
To configure the language
Remote Control (SETTINGS)
General
Menu Language
Select one of the languages on the menu displayed on the screen.
••Menu Language: sets a language for Signage.
To set the time/date
Remote Control (SETTINGS)
General
Time & Date
You can check or change the time.
••Time: you can set the time manually.
••Date: you can set the date manually.
To turn your monitor on or off automatically
Remote Control (SETTINGS)
General
Timers
You can set the On/Off Timer for your monitor.
••On Timer: you can set the time when your monitor turns on.
••Off Timer: you can set the time when your monitor turns off.
••No Signal Power Off (15 minutes): If you do not press any button within 15 minutes of the monitor
being turned on by the On Timer feature, the monitor turns
off automatically. To ensure the monitor does not turn off
automatically, set Auto Off to Off.
••Auto Power Off: If you do not press any button within four hours of the monitor being turned on, the
monitor enters Standby mode automatically.
NOTE
••On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the
preset time in the schedule list. If multiple preset times are stored in the schedule list, this function
works at the nearest time from the current time.
••Once the on or off time is set, these functions operate daily at the preset time.
••The scheduled power-off function works properly only when the device time is set correctly.
••When the scheduled power-on and power-off times are the same, the power-off time has priority
over the power-on time if the set is turned on, and vice versa if the set is turned off.
To reset your monitor settings
Remote Control (SETTINGS)
Resets all monitor settings.
General
Reset to Initial Settings
ENGLISH
General Settings
40
USER SETTINGS
ENGLISH
Installing the LG Monitor Software
Insert the software CD included in the product packaging into your PC's CD drive and install the Screen
Split. The installation screen images are for reference only. The actual installation screen images may
vary depending on the model.
1
Set up Internet Explorer as the default web
2
Click Screen Split on the CD's main
browser.
screen. When the file download window
appears, click Run. (Although the screen
below may differ depending on your operating system or Internet Explorer version,
the installation methods are the same.)
CAUTION
••Windows 7 must be updated to Service
Pack 1 or higher.
3
Follow the instructions to proceed with the
4
Check the I accept the terms of the
installation.
agreement checkbox on the License
Agreement screen and then click the Next
button.
USER SETTINGS
The Screen Split starts the installation as
shown below:
NOTE
yy Screen Split This program automatically
splits the program window as desired.
yy When you run Screen Split, the Screen
Split icon [
] appears in the system
tray at the bottom right of the PC screen.
yy Right-click the Screen Split icon and
select the desired layout.
6
When the installation is complete, restart
your system.
ENGLISH
5
41
42
TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
No image is displayed.
Problem
Is the product power cord
connected?
oes the Out of range message
D
appear?
oes the Check signal cable
D
message appear?
Action
yy
Check if the power cord is correctly plugged into the power
outlet.
yy
The signal from the PC (video card) is out of the vertical
or horizontal frequency range of the product. Adjust the
frequency range by referring to the Specifications in this
manual.
yy
The signal cable between PC and product is not connected.
Check the signal cable.
yy
Press the INPUT menu in the remote Control to check the
input signal.
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
Action
yy
Check if the Plug & Play function is supported by referring to
the video card user manual.
The screen image looks abnormal.
Problem
Is the screen position wrong?
The screen is displayed abnormally.
Action
yy
Check if the video card resolution and frequency are
supported by the product. If the frequency is out of range, set
to the recommended resolution in the Control Panel Display
Setting menu.
yy
The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
NOTE
••The software-related contents may be changed without prior notice due to upgrade of the product
functions.
TROUBLESHOOTING
43
Problem
After-image appears when the
product is turned off.
Action
yy
If you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
yy
When a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Action
yy
See if the audio cable is connected properly.
yy
Adjust the volume.
yy
See if the sound is set properly.
yy
Select the appropriate equalizer sound.
yy
Adjust the volume.
Screen color is abnormal.
Problem
Screen has poor color resolution
(16 colors).
creen color is unstable or monoS
colored.
Do black spots appear on the
screen?
Action
yy
Set the number of colors to more than 24 bits (true color).
Select Control Panel - Display - Settings - Color Table menu
in Windows.
yy
Check the connection status of the signal cable. Or, re-insert
the PC video card.
yy
Several pixels (red, green, blue, white, or black color) may
appear on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of
the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Action
yy
Is the timer set?
yy
Check the power control settings. Power interrupted.
ENGLISH
After-image appears on the product.
44
PRODUCT SPECIFICATIONS
ENGLISH
PRODUCT SPECIFICATIONS
LCD screen
Screen type
248 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Diagonal length of the screen: 248 cm
Video signal
Pixel pitch
0.562 mm (H) x 0.562 mm (V)
Maximum resolution
DVI-D: 1920 x 1080 @ 60 Hz
DISPLAYPORT: 3840 x 2160 @ 30 Hz
HDMI 1: 3840 x 2160 @ 60 Hz (YCbCr 4:2:0)
HDMI 2: 3840 x 2160 @ 60 Hz
Recommended
resolution
Horizontal frequency
Vertical frequency
Synchronization
Input/Output connector
Embedded battery
Power
- This may not be supported on some OS or video card
types.
DVI-D/ DISPLAYPORT/ HDMI 1: 1920 x 1080 @ 60 Hz
HDMI 2 : 3840 x 2160 @ 60 Hz
- This may not be supported on some OS or video card
types.
DVI-D/ HDMI 1/ HDMI 2/ DISPLAYPORT:
15 kHz to 83 kHz, 112.5 kHz(HDMI2),135 kHz(HDMI2)
DVI-D/ HDMI 1/ HDMI 2/ DISPLAYPORT:
24 Hz to 76 Hz
Digital
RS-232C In/Out, LAN, COMPONENT IN, Audio In,
HDMI1, HDMI2, DP In/Out, DVI In, USB In 1/2/3,
IR & Light Sensor, Optical Digital Audio Out,
Speaker Out L/R
Applied
Rated power
AC 100-240 V~ 50/60 Hz 6.0 A
Power consumption
On Mode: 400 W (Typ.) / 550 W (Max.)
Sleep Mode : ≤ 2 W
Environmental
Conditions
Off Mode: ≤ 0.5 W
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
“ ” refers to alternating current (AC), and “
” refers to direct current (DC).
PRODUCT SPECIFICATIONS
45
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
2191.8 mm x 1246.8 mm x 69.4 mm / 87.3 kg
2191.8 mm x 1246.8 mm x 119 mm / 88.1 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
46
PRODUCT SPECIFICATIONS
The illustrations in this manual may differ from the actual product and accessories.
Please see ‘Mounting on a wall’ section for screw sizes.
(Unit: mm)
99.4
69.4
2191.8
14.9
659.9
800
659.9
[VESA 800* 400]
423.4
400
423.4
14.9
1246.8
14.9
14.9
20
ENGLISH
Product Dimensions
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
Resolution
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
640 x 350
31.468
720 x 400
640 x 480
HDMI (DTV) Support Mode
Resolution
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
70.09
1920 x 1080
27.00
24
31.469
70.08
1920 x 1080
33.71
29.97
31.469
59.94
1920 x 1080
33.75
30
800 x 600
37.879
60.317
1920 x 1080
56.25
50
1024 x 768
48.363
60.004
1920 x 1080
67.432
59.94
1152 x 864
54.348
60.053
1920 x 1080
67.5
60
1280 x 1024
63.981
60.02
3840 x 2160
53.95
23.976
1920 x 1080
67.5
60
3840 x 2160
54
24
3840 x 2160
54
24
3840 x 2160
56.25
25
3840 x 2160
56.25
25
3840 x 2160
61.43
29.97
3840 x 2160
67.5
30
3840 x 2160
67.5
30
112.5
50
HDMI2
135
60
HDMI2
Remarks
3840 x 2160
112.5
50
HDMI2
3840 x 2160
3840 x 2160
135
60
HDMI2
3840 x 2160
DVI Support Mode
HDMI (DTV) Support Mode
Resolution
Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
640 x 480
31.469
59.94
640 x 480
31.5
60
720 x 480
15.73
59.94
720 x 480
15.75
60
720 x 576
15.625
50
720 x 480
31.47
59.94
720 x 480
31.5
60
720 x 576
31.25
50
1280 x 720
44.96
Remarks
Resolution
Horizontal
Vertical
frequency (kHz) frequency (Hz)
640 x 350
31.469
70.8
720 x 400
31.468
70.8
640 x 480
31.469
59.94
800 x 600
37.879
60.317
800 x 600
46.875
75
832 x 624
49.725
74.55
1024 x 768
48.363
60
1024 x 768
60.123
75.029
59.94
1280 x 720
44.772
59.855
47.7
60
Remarks
1280 x 720
45
60
1366 x 768
1280 x 720
37.5
50
1280 x 1024
63.981
60.02
1920 x 1080
28.125
50
1280 x 1024
79.98
75.02
1920 x 1080
33.72
59.94
1680 x 1050
65.290
59.954
1920 x 1080
33.75
60
1920 x 1080
67.5
60
1920 x 1080
26.97
23.976
ENGLISH
HDMI (PC) Support Mode
47
48
PRODUCT SPECIFICATIONS
ENGLISH
DISPLAYPORT (PC) Support Mode
COMPONENT Mode
Resolution
Horizontal
Vertical
frequency (kHz) frequency (Hz)
Resolution
Horizontal
Vertical
frequency (kHz) frequency (Hz)
640 x 480
31.469
59.94
720 x 480i
15.73
59.94
800 x 600
37.879
60.317
720 x 480i
15.73
60
1024 x 768
48.363
60
720 x 576i
15.625
50
1280 x 720
44.772
59.855
720 x 480p
31.47
59.94
1366 x 768
47.7
60
720 x 480p
31.5
60
31.25
50
1152 x 864
53.783
59.959
720 x 576p
1280 x 960
60
60
1280 x 720
44.96
59.94
1280 x 1024
63.981
60.02
1280 x 720
45
60
45
50
1680 x 1050
65.290
59.954
1280 x 720
1920 x 1080
67.5
60
1920 x 1080
28.125
50
30
1920 x 1080
33.72
59.94
1920 x 1080
33.75
60
1920 x 1080
56.25
50
1920 x 1080
67.5
60
3840 x 2160
67.5
DISPLAYPORT (DTV) Support Mode
Resolution
Horizontal
Vertical
frequency (kHz) frequency (Hz)
720 x 480p
31.5
60
720 x 576p
31.25
50
1280 x 720p
37.5
50
1280 x 720p
45
60
1920 x 1080i
28.1
50
1920 x 1080i
33.75
60
1920 x 1080p
56.25
50
1920 x 1080p
67.5
60
3840 x 2160p
67.5
30
NOTE
••Vertical frequency: The product display
functions by the screen image changing
dozens of times every second like a
fluorescent lamp. The vertical frequency
or refresh rate is the number of image
displays per second. The unit is Hz.
••Horizontal frequency: The horizontal
interval is the time taken to display one
horizontal line. When 1 is divided by
the horizontal interval, the number of
horizontal lines displayed every second
can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
ENGLISH
IR CODES
All models do not support the HDMI/USB function.
Some key codes may not be supported Depending upon the model.
Code (Hex)
Function
08
Remarks
Remote control button
C4
C5
ON
Remote control button
OFF
Remote control button
95
Energy Saving
Remote control button
0B
INPUT
Remote control button
10
Number Key 0
Remote control button
11
Number Key 1
Remote control button
12
Number Key 2
Remote control button
13
Number Key 3
Remote control button
14
Number Key 4
Remote control button
15
Number Key 5
Remote control button
16
Number Key 6
Remote control button
17
Number Key 7
Remote control button
18
Number Key 8
Remote control button
19
Number Key 9
Remote control button
02
Volume
Remote control button
03
Volume
Remote control button
E0
E1
(Page Up)
Remote control button
(Page Down)
Remote control button
DC
3D
Remote control button
32
1/a/A
Remote control button
2F
CLEAR
Remote control button
7E
49
Remote control button
79
ARC(MARK) (Aspect Ratio)
Remote control button
4D
PSM (Picture Mode)
Remote control button
09
MUTE
Remote control button
43
SETTINGS (Menu)
Remote control button
99
Auto Config.
Remote control button
40
Up ▲
Remote control button
41
Down ▼
Remote control button
06
Right ►
Remote control button
07
Left ◄
Remote control button
44
OK
Remote control button
28
BACK
Remote control button
50
IR CODES
ENGLISH
Code (Hex)
Function
Remarks
7B
TILE
Remote control button
5B
EXIT
Remote control button
72
ID ON (RED)
Remote control button
71
ID OFF (GREEN)
Remote control button
63
YELLOW
Remote control Button
61
BLUE
Remote control button
B1
Remote control button
B0
Remote control button
BA
Remote control button
8F
Remote control button
8E
Remote control button
5F
W.BAL
Remote control button
3F
S.MENU
Remote control button
7C
HOME
Remote control button
TO CONTROL MULTIPLE PRODUCTS
51
Use this method to connect several products to a single PC. You can control several products at a time
by connecting them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
product on or off, select an input source or adjust the OSD menu from your PC.
PC
Monitor 1
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable
RS-232C Configurations
8-Wire Configurations (Standard RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
Set
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate: 9600 BPS
NOTE
••When using three-wire connections (nonstandard), an IR daisy chain cannot be
used.
NOTE
••When monitors connected via Daisy Chain
(that controls multiple monitors) are turned
off and on successively, some monitors may
not turn on. In this case, you can turn those
monitors on by pressing the MONITOR ON
button, not the POWER button.
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1 bit
(POWER)
Flow Control: None
Communication Code: ASCII code
Use a crossed (reverse) cable
MONITOR ON
ENGLISH
TO CONTROL MULTIPLE PRODUCTS
52
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
Command Reference List
COMMAND
1
2
DATA
(Hexadecimal)
01
Power
k
a
00 to 01
02
Select input
x
b
See Select Input
03
Aspect Ratio
k
c
See Aspect Ratio
04
Energy Saving
j
q
See Energy Saving
05
Picture Mode
d
x
See Picture Mode
06
Contrast
k
g
00 to 64
07
Brightness
k
h
00 to 64
08
Sharpness
k
k
00 to 32
09
Color
k
i
00 to 64
10
Tint
k
j
00 to 64
11
Color temperature
x
u
00 to 64
12
Balance
k
t
00 to 64
13
Sound Mode
d
y
See Sound Mode
14
Mute
k
e
00 to 01
15
Volume Control
k
f
00 to 64
16
Time 1 (year/month/day)
f
a
See Time 1
17
Time 2 (hour/minute/second)
f
x
See Time 2
18
Off time schedule
f
c
00 to 01
19
On Time Schedule
f
b
00 to 01
20
Off Timer (Repeat/Time)
f
e
See Off Timer
21
On Timer (Repeat/Time)
f
d
See On Timer
22
On Timer Input
f
u
Refer to On Timer Input.
23
No Signal Power Off (15Min)
f
g
00 to 01
24
Auto Power Off (4 Hours)
m
n
00 to 01
25
Language
f
i
See Language
26
Reset
f
k
00, 02
27
Current Temperature
d
n
FF
28
Key
m
c
See Key
29
Time Elapsed
d
l
FF
30
Product Serial Number
f
y
FF
31
Software Version
f
z
FF
32
White Balance Red Gain
j
m
00 to FE
33
White Balance Green Gain
j
n
00 to FE
TO CONTROL MULTIPLE PRODUCTS
2
DATA
(Hexadecimal)
34
White Balance Blue Gain
j
o
00 to FE
35
White Balance Red Offset
s
x
00 to FE
36
White Balance Green Offset
s
y
00 to FE
37
White Balance Blue Offset
s
z
00 to FE
38
Backlight
m
g
00 to 64
39
Screen off
k
d
00 to 01
40
Tile Mode
d
d
00 to FF
41
Check Tile Mode
d
z
FF
42
Tile ID
d
i
See Tile ID
43
Natural Mode
d
j
00 to 01
44
DPM Select
f
j
00 to 07
45
Remote Control/Local Key Lock
k
m
00 to 01
46
Power On Delay
f
h
00 to 64
47
Fail Over Select
m
i
00 to 02
48
Fail Over Input Select
m
j
See Fail Over Input Select
49
IR Operation
t
p
00 to 02
50
Local Key Operation
t
o
00 to 02
51
Check the status
s
v
See Check the status
52
Check Screen
t
z
00 to 01
53
Speakers
d
v
00 to 01
* Note: Only the power and key commands can be used while media files are playing from a USB
device or internal/external memory. The commands other than the power and key commands will be
treated as NG. Some commands may not be supported Depending upon the model.
ENGLISH
COMMAND
1
53
54
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
Transmission/Reception Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: identifies between the factory setting and the user setting modes.
* [Command2]: controls monitor sets.
* [Set ID]: U
sed for selecting a set you want to control. A unique Set ID can be assigned to each set
ranging from 1 to 255 (01H~FFH) under Settings in the OSD menu.
Selecting '00H' for Set ID allows the simultaneous control of all connected monitors.
* The maximum value of Set ID may differ depending on the model.
* [Data]: Transmits command data.
Data count may increase depending on the command.
* [Cr]: Carriage Return. Corresponds to '0x0D' in ASCII code.
* [ ]: White Space. Corresponds to '0x20' in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At
this time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns
the data of the PC computer.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and each monitor
set does not send an acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can
be checked (only for some functions).
*Some commands are not supported Depending upon the model.
TO CONTROL MULTIPLE PRODUCTS
04. Energy Saving (Command: j q)
Sets the Energy Saving.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
*The acknowledgement signal is returned properly only
when the monitor is fully powered on.
* There may be a delay between the transmission and
acknowledgement signals.
02. Select Input (Command: x b)
Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
40: COMPONENT
70: DVI (PC)
80: DVI (DTV)
90: HDMI1 (DTV)
A0: HDMI1 (PC)
91: HDMI2 (DTV)
A1: HDMI2 (PC)
C0: DISPLAYPORT (DTV)
D0: DISPLAYPORT (PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported depending
upon the model.
03. Aspect Ratio (Command: k c)
Adjusts the aspect ratio.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
06: Set by Program
09: Just Scan (720p or higher)
10 to 1F: Cinema Zoom 1 to 16
* Available data types differ depending on the input signal.
For more information, see the aspect ratio section of the
owner’s manual.
* The aspect ratio may differ Depending upon the model's
input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported depending upon the
model.
05. Picture Mode (Command: d x)
Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02: Cinema
03: Sports
04: Game
05: Expert 1
06: Expert 2
08: APS
09: Photo
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Depending upon the model, some picture modes may
not be supported.
06. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
01. Power (Command: k a)
Controls the power on/off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
55
56
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
07. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
10. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Data
00 to 64: Tint red 50 to green 50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
Adjusts the screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00 to 64: warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. Balance (Command: k t)
Adjusts the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
00 to 64: left 50 to right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
57
17. Time 2 (hour/minute/second) (Command: f x)
Adjusts the Time 2 (hour/minute/second) value.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sports
05. Game
07: News
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Data1
00 to 17: 00 to 23 hours
Data2
00 to 3B: 00 to 59 minutes
Data3
00 to 3B: 00 to 59 seconds
* Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/
second) settings.
** This function is only available when Time 1 (year/month/
day) is set.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
14. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00: Mute
01: Unmute
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
18. Off Time Schedule (Command: f c)
Enables/disables the Off Time Schedule.
Transmission
[f][c][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
15. Volume Control (Command: k f)
Adjusts the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
16. Time 1 (year/month/day) (Command: f a)
Adjusts the Time 1 (year/month/day) value.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
04~1B: year 2014 to 2037
Data2
01 to 0C: January to December
Data3
01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Time 1 (year/month/day)
settings.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
19. On Time Schedule (Command: f b)
Enables/disables the On Time schedule.
Transmission
[f][b][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
13. Sound mode (Command: d y)
Selects a sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
58
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
20. Off Timer (Repeat/Time) (Command: f e)
Configures Off Timer (Repeat/Time) settings.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
21. On timer (Repeat/Time) (Command: f d)
Configures On Timer (Repeat/Time) settings.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. f1h to f7h (reading data)
F1: reads the 1st Off Timer data
F2: reads the 2nd Off Timer data
F3: reads the 3rd Off Timer data
F4: reads the 4th Off Timer data
F5: reads the 5th Off Timer data
F6: reads the 6th Off Timer data
F7: reads the 7th Off Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all Off Timer settings
E1: erases the 1st Off Timer setting
E2: erases the 2nd Off Timer setting
E3: erases the 3rd Off Timer setting
E4: erases the 4th Off Timer setting
E5: erases the 5th Off Timer setting
E6: erases the 6th Off Timer setting
E7: erases the 7th Off Timer setting
3. 01h to 0Ch (sets the day of the week for the Off Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete the Off Time Schedule list, [Data2]
[Data3] must be set to FFH.
Example 1: fe 01 f1 ff ff – reads the first index data in Off
Timer.
Example 2: fe 01 e1 ff ff - deletes the first index data from
Off Timer.
Example 3: fe 01 04 02 03 - sets Off Timer to 02:03 from
Monday to Saturday.
* This function is only available when Time 1 (year/month/
day) and Time 2 (hour/minute/second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
1. f1h to f7h (reading data)
F1: reads the 1st On Timer data
F2: reads the 2nd On Timer data
F3: reads the 3rd On Timer data
F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete an On Time schedule list, [Data2][Data3]
must be set to FFH.
Example 1: fd 01 f1 ff ff - reads the first index data from On
Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data from
On Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03 from
Monday to Saturday.
* This function is only available when Time 1 (year/month/
day) and Time 2 (hour/minute/second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
TO CONTROL MULTIPLE PRODUCTS
Data (Add schedule)
40: COMPONENT
70: DVI(PC)
A0: HDMI1 (PC)
A1: HDMI2 (PC)
D0: DISPLAYPORT (PC)
Data1 (Read schedule)
1. f1h to f7h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2 (Read schedule)
FF
* To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when attempting to
read the schedule data, the text ‘NG’ will be displayed and
the operation will fail.
(Example 1: fu 01 90 - Move each schedule input down one
row and save the 1st schedule input in HDMI mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
* This function is supported only when 1 (Year/Month/Day),
2 (Hour/Minute/Second), On Time (Repeat Mode/Time)
are set.
** It may not be supported Depending upon the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
23. No Signal Power Off (15Min) (Command: f g)
The monitor will enter Automatic Standby mode if there is
no signal for 15 minutes.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Auto Power Off (4 Hours) (Command: m n)
The monitor will Auto Power Off after 4 hours.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: 4 hours
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
25. Language (Command: f i)
Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Cantonese)
11: Japanese
12: Chinese (Mandarin)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
22. On Timer Input (Command: f u)
Select an external input for the current On Time setting and
add a new schedule.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][][Data2][Cr]
59
60
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
26. Reset (Command: f k)
Performs the Picture and Factory Reset functions.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
02: Initial Settings (factory reset)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
27. Current temperature (Command: d n)
Checks the inside temperature.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed as a hexadecimal value.
29. Time Elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data received is shown as a hexadecimal value.
30. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data
FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
28. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
31. Software Version (Command: f z)
Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
DataIR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
Data
FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes are not supported Depending upon
the model.
TO CONTROL MULTIPLE PRODUCTS
Data
00 to FE: Red Gain 0 to 254
FF: checks the red gain value
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
33. White Balance Green Gain (Command: j n)
Adjusts the white balance green gain value.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Green Gain 0 to 254
FF: checks the green gain value
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
34. White Balance Blue Gain (Command: j o)
Adjusts the white balance blue gain value.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Blue Gain 0 to 254
FF: checks the blue gain value
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
35. White Balance Red Offset (Command: s x)
Adjusts the white balance red offset value.
Transmission
[s][x][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Red Offset 0 to 127
FF: checks the red offset value
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
36. White Balance Green Offset (Command: s y)
Adjusts the white balance green offset value.
Transmission
[s][y][ ][Set ID][ ][Data][Cr]
Data 00 to 7F: Green Offset 0 to 127
FF: checks the green offset value
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
37. White Balance Blue Offset (Command: s z)
Adjusts the white balance blue offset value.
Transmission
[s][z][ ][Set ID][ ][Data][Cr]
Data 00 to 7F: Blue Offset 0 to 127
FF: checks the blue offset value
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
32. White balance red gain (Command: j m)
Adjusts the white balance red gain value.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
61
62
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
38. Backlight (Command: m g)
Adjusts the backlight brightness.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
41. Check Tile Mode (Command: d z)
Checks the tile mode.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
39. Screen Off (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: turns the screen on
01: turns the screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
FF: checks the tile mode
00: tile mode off
01: tile mode on
00 to 0F: tile column
00 to 0F: tile row
42. Tile ID (Command: d i)
Sets the tile ID value of the product.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 1 to 225**
FF: checks the tile ID
** The data value cannot exceed the value of row x
column.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* When a data value that exceeds the value of row x
column is entered (except 0xFF),
ACK becomes NG.
40. Tile Mode (Command: d d)
Sets the Tile Mode and sets values for the tile rows and
columns.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: The first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off.
* The maximum values of the rows and columns in Tile
Mode may differ depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported depending upon the
model.
43. Natural Mode (in Tile mode) (Command: d j)
When displaying the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data 00: Off
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minutes
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Remote Control/Local Key Lock (Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* When the remote control and front keys are locked
in Standby mode, you cannot turn on the power on by
using the remote control or front power button.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
47. Fail Over Select (Command: m i)
Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48. Fail Over Input Select (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over
(auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ]
[Data5][Cr]
Data 1 to 5 (Input priority: 1 to 5)
40: COMPONENT
70: DVI
90: HDMI1
91: HDMI2
C0: DISPLAYPORT
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
Data 1 to 5 (Input priority: 1 to 5)
40: COMPONENT
70: DVI
90: HDMI1
91: HDMI2
C0: DISPLAYPORT
* Some input signals may not be supported depending
upon the model.
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on. (unit:
seconds).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to maximum 100 (seconds)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
* The maximum Power On delay time may differ
depending on the model.
49. IR Operation (Command: t p)
Configures the IR operation settings of the product.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data 00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key still
functions, even in the locks on all of the keys (02)
mode.
ENGLISH
44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
63
64
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
50. Local Key Operation (Command: t o)
Configures the local key operation settings of the product.
Transmission
[t][o][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
01: locks on all of the keys except the Power
key
02: locks on all of the keys
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key still
functions, even in the locks on all of the keys (02)
mode.
51. Status (Command: s v)
Checks the current signal status of the product.
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 02: checks whether there is a signal or not
10: RGB sensing OK/NG (Check Screen)
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
Data: 02 (when a signal is found)
Data1 00: no signal
01: there is a signal
Data: 10 (Check Screen)
Data1 00: Check Screen result NG
07: Check Screen result OK
* Treated as NG if Check Screen is set to Off.
52. Check Screen (Command: t z)
Sets Check Screen.
Transmission
[t][z][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
* Depending upon the model, Check Screen may not be
supported.
53. Speaker (Command: d v)
Sets the speaker function.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual (CD) in an
accessible place for future reference.
The model and serial numbers of the SET
are located on the back and one side of
the SET. Record them below should you
ever need service.
MODEL
SERIAL
To obtain the source code under GPL,
LGPL, MPL and other open source
licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers
and copyright notices are available for
download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping, and handling) upon email
request to opensource@lge.com. This offer
is valid for three (3) years from the date on
which you purchased the product.
WARNING - This is a class A product. In a
domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.
Temporary noise is normal when powering
ON or OFF this device.
Download PDF