LG | APNC488TLA0.AMWBASA | LG APNC488TLA0.AMWBASA Owner’s Manual

ENGLISH
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : FLOOR STANDING
www.lg.com
P/NO : MFL68588602
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may
block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS
3
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
! CAUTION
It can result in minor injury or product damage when the directions are ignored
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• The product shall be installed according to the Wiring regulations of the corresponding country.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
Installation
• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
There is risk of fire or electric shock.
• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service
Center. Do not disassemble or repair the product. There is risk of fire or electric shock.
• Always ground the product. There is risk of fire or electric shock.
• Install the panel and the cover of control box securely. There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker. Improper wiring or installation may cause fire or
electric shock
• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.
• Do not modify or extend the power cable. There is risk of fire or electric shock.
• Do not install, remove, or re-install the unit by yourself (customer). There is risk of fire, electric
shock, explosion, or injury.
• Be cautious when unpacking and installing the product. Sharp edges could cause injury. Be
especially careful of the case edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized Service Center. There is risk of
fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand. It may cause injury, accident, or
damage to the product.
• Be sure the installation area does not deteriorate with age. If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.
• Do not let the air conditioner run for a long time when the humidity is very high and a door or
a window is left open. Moisture may condense and wet or damage furniture.
Operation
• Take care to ensure that power cable could not be pulled out or damaged during operation.
There is risk of fire or electric shock.
• Do not place anything on the power cable. There is risk of fire or electric shock.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
• Do not plug or unplug the power supply plug during operation. There is risk of fire or electric shock.
• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.
• Do not place a heater or other appliances near the power cable. There is risk of fire and electric shock.
• Do not allow water to run into electric parts. It may cause There is risk of fire, failure of the
product, or electric shock.
• Do not store or use flammable gas or combustibles near the product. There is risk of fire or
failure of product.
• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could occur.
• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the
product on. Do not use the telephone or turn switches on or off. There is risk of explosion or fire
• If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect
the power supply cable. There is risk of electric shock or fire.
• Stop operation and close the window in storm or hurricane. If possible, remove the product
from the window before the hurricane arrives. There is risk of property damage, failure of
product, or electric shock.
• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,
if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.
• When the product is soaked (flooded or submerged), contact an Authorized Service Center.
There is risk of fire or electric shock.
• Be cautious that water could not enter the product. There is risk of fire, electric shock, or
product damage.
• Ventilate the product from time to time when operating it together with a stove, etc. There is
risk of fire or electric shock.
• Turn the main power off when cleaning or maintaining the product. There is risk of electric shock.
• When the product is not be used for a long time, disconnect the power supply plug or turn off
the breaker. There is risk of product damage or failure, or unintended operation.
• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result
in personal injury and product damage.
! CAUTION
Installation
• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels may cause failure of product.
• Install the drain hose to ensure that water is drained away properly. A bad connection may cause
water leakage.
• Keep level even when installing the product. To avoid vibration or water leakage.
• Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods. It may cause a problem for your neighbors.
• Use two or more people to lift and transport the product. Avoid personal injury.
• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.
Operation
• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could
harm to your health.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric
shock, or damage to the plastic parts of the product.
IMPORTANT SAFETY INSTRUCTIONS
5
is risk of personal injury.
• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure of product.
• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty
filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.
• Do not insert hands or other objects through the air inlet or outlet while the product is operated.
There are sharp and moving parts that could cause personal injury.
• Do not drink the water drained from the product. It is not sanitary and could cause serious health issues.
• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal injury.
• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and
new batteries or different types of batteries. There is risk of fire or explosion
• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or
explode.
• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the
remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if
the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
!
NOTE
- For service and transportation, always contact service center or authorized installer.
Otherwise, it may cause a fire, electrical shock, explosion or injury.
- For more information about Product, please refer to the Label.
ex) Month and year of manufacturing can check Serial label. Serial No. of Product was manufactured in November 2013 is 311***.
ENGLISH
• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There
6
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2
3
TIPS FOR
SAVING ENERGY
14
Simple Reservation
15 OPERATING
NSTRUCTIONS
(Heat pump model)
IMPORTANT
SAFETY INSTRUCTIONS
15
Cooling Mode
7
BEFORE USE
15
Heating Mode
7
Preparing for operation
15
Airflow Setting
7
Usage
15
Fan Speed Mode
7
Cleaning and maintenance
16
Dehumidification Mode
7
Service
16
Power Cooling/Heating Mode
8
PRODUCT
INTRODUCTION
16
Fan Mode
16
Auto Operation Mode
16
Simple Reservation
17
Child Lock Operation Procedure
8
Specifications
9
Indoor Unit Controls and Indicators
10
Wireless remote control (Cooling Only)
11
Wireless remote control (Heat Pump)
12
Remote control preparation
13 OPERATING
INSTRUCTIONS
(Cooling only model)
13
Cooling Mode
13
Auto cleaning button
13
Airflow Setting
13
Fan Speed Mode
14
Dehumidification Mode
14
Power Cooling Mode
14
Fan Mode
14
Auto Operation Mode
18 MAINTENANCE AND
SERVICE
18
During the season
18
When the air conditioner is not going
to be used for a long time.
19
Operation Tips
20
Troubleshooting
BEFORE USE
7
Preparing for operation
• Contact an installation specialist for installation.
• Use a dedicated circuit.
Usage
• Being exposed to direct airflow for an extended period of time could be hazardous to your
health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves
or other heating devices.
• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning and maintenance
• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
• Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
• When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is
accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
ENGLISH
BEFORE USE
8
PRODUCT INTRODUCTION
ENGLISH
PRODUCT INTRODUCTION
Specifications
Air Outlet Vent
Air Intake Vent
(Rear, Side)
Remote Signal
Receptor
Air Outlet
Vent
Air Intake Vent
PRODUCT INTRODUCTION
ENGLISH
Indoor Unit Controls and Indicators
7
8
6
5
2
1
A/CL
10
9
1. Start/stop button
Operation starts when this button is
pressed and stops when the button is
pressed again.
5. Fan Operation lamp
2. Operation mode selection button
Used to select the operation Mode.
8. Auto Operation lamp
3. Room temperature setting buttons
Used to select the room temperature.
!
4
3
6. Cooling Operation lamp
7. Soft dry Operation lamp
9. Off timer Operation lamp
10. Outdoor Unit Operation lamp
4. Indoor fan speed selection
Used to select fan speed in two steps-low,
med.
NOTE
Some buttons cannot be used by model’s function.
9
10 PRODUCT INTRODUCTION
ENGLISH
Wireless remote control (Cooling Only)
No.
1
Control
panel
1
2
5
3
4
6
7
8
9
10
11
12
13
2
Description
Remote control operation lamp
|
Power ON/OFF button : Operation will
start when this button is pressed, and
stop when the button is pressed again.
3
Indoor fan speed button : To select the
desired fan speed.
4
Temperature setting button
5
A
Auto cleaning button(Optional)
6
7
8
Cooling button
D
Dehumidification button : Can effectively
remove humidity when at the time of
rainy season or high humidity.
C
Auto operation button : In operation this
function, air conditioner control the setting temperature by comparing room
temperature and hot or cool level customer set
9
Fan mode button
10
Air flow direction button(Up/down,
Left/right) : Adjust air flow direction vertically or horizontally.
11
Power cooling mode button : Powerful
cooling is performed
12
ON/OFF timer setting button : Set the
time of starting or stopping
13
Timer cancel button
Handling the remote control
- Aim at the signal receptor on the floor standing type air conditioner when operating.
- The remote control signal can be received at a distance of up to about 7 meters.
- Be sure that there are no obstructions between the remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to direct sunlight, next to heating unit, or
other heat sources.
!
NOTE
Some buttons cannot be used by model’s function.
PRODUCT INTRODUCTION
11
ENGLISH
Wireless remote controller (Heat Pump)
No.
1
Control
panel
1
2
5
3
4
6
7
8
9
10
11
12
13
2
Description
Remote controller operation lamp
|
Power ON/OFF button : Operation will
start when this button is pressed, and
stop when the button is pressed again.
3
Indoor fan speed button : To select the
desired fan speed.
4
Temperature setting button
5
6
A
B
Cooling button
Heating button
7
D
Dehumidification button : Can effectively
remove humidity when at the time of
rainy season or high humidity.
8
C
Auto operation button : Auto heating and
cooling operation is conducted in accordance with setting temperature.
9
Fan mode button
10
Air flow direction button(Up/down,
Left/right) : Adjust air flow direction vertically or horizontally.
11
Power cooling/heating mode button :
Powerful cooling/heating are performed
within short time
12
ON/OFF timer setting button : Set the
time of starting or stopping
13
Timer cancel button
Handling the remote control
- Aim at the signal receptor on the floor standing type air conditioner when operating.
- The remote control signal can be received at a distance of up to about 7 meters.
- Be sure that there are no obstructions between the remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to direct sunlight, or next to a heating
unit, or other heat source.
!
NOTE
Some buttons cannot be used by model’s function.
12 PRODUCT INTRODUCTION
ENGLISH
Remote control preparation
How to mount onto a wall
1 Use the screws to secure the holder to the
wall or attach the holder side of indoor
unit.
2 To insert the remote control to the holder.
- Do not use rechargeable batteries such batteries are different from standard dry cells in
shape, dimensions, and performance.
- Change the batteries with a new one if the
remote control does not work properly after
using for an extended period of time.
! CAUTION
How to insert batteries
1 Remove the cover from the back of the remote control.
- Slide the cover according to the arrow direction.
2 Insert two batteries.
- Be sure that the (+) and (-) directions are
correct.
- Be sure that both batteries are new.
3 Re-attach the cover.
- Slide the cover into back position.
• When not using remote control for a
long time, flowing of dry cell liquid may
cause the failure of product, therefore,
remove all dry cells.
• When replacing dry cell (AAA), replace
two of them all with new ones, and if remote control is not operated properly
even after replacing the dry cells (AAA),
request the service.
• Do not disassemble or re-charge the
used dry cells, and do not throw away
those at the location with heat of fire or
hot air. There will be the danger of explosion.
OPERATING INSTRUCTIONS (Cooling only model) 13
Cooling Mode
Airflow Setting
1 Press | button to turn on the indoor.
We can simply adjust the desired airflow direction.
2 Press a button to select Cooling opera-
tion mode.
- When canceling operating, press | button once more.
3 Adjust the desired temperature by pressing (
) buttons.
- If desired temperature is higher than
room temperature, cooling cannot be conducted.
- Set the temperature lower than the room
temperature
- Setting Temp Range : 18°C~30°C.
!
Up/Down Airflow Direction Control
1 Press | button to turn on the indoor.
2 Press I button and the louvers will swing
up and down.
3 PressI button again to set the horizontal
louver at the desired airflow direction.
Left/Right Airflow Direction Control
1 Press | button to turn on the indoor.
2 Press J button and the louvers will
NOTE
What is 3 minutes delay function?
The reason that cold wind is not coming out
when operating the unit after turning off the
cooling is because of the function to protect
compressor. Cold wind will be coming out
when compressor is operated after 3 minutes.
swing left and right.
3 Press J button again to set the vertical
louver at the desired airflow direction.
<Airflow Setting Table>
Symbol
I
Description
Up·Down : Vane move from up to
down automatically and continuously
Auto cleaning button
: Vane move from left to
J Left·Right
right automatically and continuously
In the cooling and dehumidifying operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture
Fan Speed Mode
1 Press | button to turn on the indoor.
2 Press
button.
is displayed on the display screen.
-
- If you turn off the power, the fan
operates for 3 minutes and cleans the inside
of the indoor unit.
!
NOTE
Some buttons cannot be used while the
auto cleaning function is in operation.
1 Press | button to turn on the indoor.
2 Press
button to select fan speed.
- You can select the fan speed in four
steps low, mid, high, super high. Each
time the button is pressed, the fan speed
mode is shifted
- Air flow rate can be selected during the
cooling, dehumidification, blowing, and
auto operation mode.
!
NOTE
Some buttons cannot be used by model’s
function.
ENGLISH
OPERATING INSTRUCTIONS (Cooling only model)
14 OPERATING INSTRUCTIONS (Cooling only model)
ENGLISH
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively.
- The temperature established by customer
will be maintained through automatic performance of cooling operation in accordance with the change of room
temperature.
1 Press | button to turn on the indoor.
2 Press c button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at display section for about 5 seconds.
Power Cooling Mode
Strong cooling will be conducted in short time.
1 Press | button to turn on the indoor.
2 Press
button to operate power cooling
- When power cooling button is pressed
during cooling/dehumidification mode,
power cooling will be operated. In power
cooling mode, desired temperature is set
to 18°C and the horizontal louver is fixed
at the highest position.
Fan Mode
1 Press | button to turn on the indoor.
button to circulate indoor air.
- When canceling operation, press | button once more.
- During fan mode, outdoor fan and compressor will not be operated.
Auto Operation Mode
1 Press | button to turn on the indoor.
2 Press 2 button to select Auto Operation
Mode.
3 Adjust the desired temperature by pressing (
Turning ON reservation mode
This function is able to turn on unit after a setting time.
1 When the unit is turned off, adjust desired
setting time with
button.
- Up to the maximum of 24 hours can be
selected.
Turning OFF reservation mode
This function is able to turn off unit after a setting time.
mode.
2 Press
Simple Reservation
) buttons.
- When room temperature is higher than
desired temperature, cooling operation
will be performed.
1 When the unit is turned on, adjust desired
setting time with
button.
- Up to the maximum of 7 hours can be selected.
!
NOTE
After performing the setting, if corresponded
setting button is pressed once, remaining setting time will be displayed, and if it is pressed
once again, corresponded setting function will
be cancelled. (same function as
) Remaining
setting time will be displayed with the unit of 1
hour.
OPERATING INSTRUCTIONS (Heat pump model) 15
Cooling Mode
Airflow Setting
1 Press | button to turn on the indoor.
2 Press a button to select Cooling opera-
We can simply adjust the desired airflow direction.
tion mode.
- When canceling operating, press | button once more.
3 Adjust the desired temperature by pressing (
) buttons.
- If desired temperature is higher than
room temperature, cooling cannot be conducted.
- Set the temperature lower than the room
temperature
- Setting Temp Range : 18°C~30°C.
!
NOTE
What is 3 minutes delay function?
The reason that cold wind is not coming out
when operating the unit after turning off the
cooling is because of the function to protect
compressor. Cold wind will be coming out
when compressor is operated after 3 minutes.
Up/Down Airflow Direction Control
1 Press | button to turn on the indoor.
2 Press
button and the louvers will swing
up and down.
3 Press
button again to set the horizontal
louver at the desired airflow direction.
Left/Right Airflow Direction Control
1 Press | button to turn on the indoor.
2 Press
button and the louvers will swing
left and right.
3 Press
button again to set the vertical
louver at the desired airflow direction.
<Airflow Setting Table>
Symbol
Heating Mode
1 Press | button to turn on the indoor.
2 Press d button to select Heating opera-
tion mode.
- When canceling operation, press | button once more.
3 Adjust the desired temperature by pressing (
) buttons.
- If desired temperature is lower than room
temperature, heating cannot be conducted.
- Set up desired temperature higher than
the room temperature
- Setting Temp Range : 16°C~30°C.
!
NOTE
Preheating operation
When conducting heating operation at the
condition of low outdoor temperature, the
case that wind is not coming out for several
minutes under the state of lighting of defrost lamp may be occurred. This is the preheating stage to supply warm wind which
will be supplied subsequently in short time.
Description
Up·Down : Vane move from up to
down automatically and continuously
Left·Right : Vane move from left to
right automatically and continuously
Fan Speed Mode
1 Press | button to turn on the indoor.
2 Press
button to select fan speed.
- You can select the fan speed in four
steps low, mid, high, super high. Each
time the button is pressed, the fan speed
mode is shifted
- Air flow rate can be selected during the
cooling, heating, dehumidification, blowing, and auto operation mode.
!
NOTE
Some buttons cannot be used by model’s
function.
ENGLISH
OPERATING INSTRUCTIONS (Heat pump model)
16 OPERATING INSTRUCTIONS (Heat pump model)
ENGLISH
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively.
1 Press | button to turn on the indoor.
2 Press c button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at display section for about 5 seconds.
Power Cooling/Heating Mode
Strong cooling/heating will be conducted in
short time.
1 Press | button to turn on the indoor.
2 Press
button to operate power cooling/heating mode.
- When power (cooling/heating) button is
pressed during cooling/dehumidification
mode, power cooling will be operated.
In power cooling mode, desired temperature is set to 18°C and the horizontal louver is fixed at the highest position.
- When power (cooling/heating) button is
pressed during heating operation, power
heating will be operated.
In power heating mode, desired temperature is set to 30°C and the horizontal louver is fixed at the lowest position.
Fan Mode
1 Press | button to turn on the indoor.
2 Press
button to circulate indoor air.
- When canceling operation, press | button once more.
- During fan mode, outdoor fan and compressor will not be operated.
Auto Operation Mode
1 Press | button to turn on the indoor.
2 Press 2 button to select Auto Operation
Mode.
3 Adjust the desired temperature by pressing (
) buttons.
- When room temperature is higher than
desired temperature, cooling operation
will be performed, and when it is lower,
heating operation will be conducted.
- The temperature established by customer
will be maintained through automatic performance of cooling/heating operation in
accordance with the change of room temperature.
Simple Reservation
Turning ON reservation mode
This function is able to turn on unit after a setting time.
1 When the unit is turned off, adjust desired
setting time with
button.
- Up to the maximum of 24 hours can be
selected.
Turning OFF reservation mode
This function is able to turn off unit after a setting time.
1 When the unit is turned on, adjust desired
setting time with
button.
- Up to the maximum of 7 hours can be selected.
!
NOTE
After performing the setting, if corresponded
setting button is pressed once, remaining setting time will be displayed, and if it is pressed
once again, corresponded setting function will
be cancelled. (same function as
) Remaining
setting time will be displayed with the unit of 1
hour.
OPERATING INSTRUCTIONS 17
ENGLISH
Child Lock Operation Procedure
1
Press the fan speed button and High temperature setting buttons simultaneously for 3
conds. The unit will respond with beep.
After 3 second,
it will shift
2
After 3 seconds,
it will shift
During Child Lock Operation
• Whenever you press any Button on Display Panel, it will immediately display
“CL”, which means Display panel is Locked.
• All the Button on the indoor unit Display panel will not work.
• But the Button on the remote controller will work.
3
For releasing child lock Operation
Press the fan speed button and High temperature setting buttons simultaneously for 3
conds.
The unit will respond with beep, Child Lock Operation will removed.
After pressing
the buttons
it will shift
immediately
After 3 seconds,
it will shift
18 MAINTENANCE AND SERVICE
ENGLISH
MAINTENANCE AND SERVICE
! CAUTION
Before performing any maintenance, turn
off the main power to the system.
During the season
Never use any of the followings.
- Water hotter than 40°C.
Could cause deformation and/or discoloration.
- Volatile substances.
Could damage the surfaces of the air conditioner.
Cleaning of the air filters.
Recommended about once every two weeks
- Remove the Air Filter.
Take hold of the tab and pull slightly forward
to remove the filter.
- Clean.
To remove the dust adhering to the filters, either use a vacuum cleaner, or wash them in
water and dry in the shade.
Re-insert the filter to the original position.
Cleaning of the air conditioner
- Don’t wash with water.
When the air conditioner is
not going to be used for a
long time.
At the end of the season
- Operate the air conditioner at the following
settings for 2 to 3 hours.
Type of operation : Cooling.
Temperature setting : 30°C.
This will dry out the internal mechanisms.
- Remove the batteries from the Remote Control.
- Turn off the circuit breaker.
- Wipe with a soft dry cloth.
! CAUTION
Cleaning of the air cleaner.
Recommended about once every three
months
Turn off the circuit breaker when the air
conditioner is not going to be used for a
long time.
Dirt may collect and may cause a fire.
- Remove the Air Cleaner.
Take hold of the tab and pull slightly forward
to remove the air cleaner.
- Clean.
Dip the air cleaner into the water mixed with
detergent, for 20~30 minutes, and dry in the
shade.
Re-insert the air cleaner to the original position.
At the start of the season
- Clean the air filters, re-insert, then operate
the air conditioner.
- Be sure that nothing obstructs the air outlet
and intake vents.
MAINTENANCE AND SERVICE 19
ENGLISH
Operation Tips
Do not overcool the room.
Keep blinds or curtains closed.
This is not good for your health Do not let direct sunshine
and wastes electricity.
enter the room when the air
conditioner is in operation.
Keep the room temperature
uniform.
Adjust the vertical and horizontal airflow direction to ensure a
uniform temperature in the
room.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and windows as much as possible to
keep the cool air in the room.
Ventilate the room occasionally.
Since windows are kept
closed, it is a good idea to
open them and ventilate the
room now and then.
Clean the air filter regularly.
Blockages in the air filter reduces the airflow and lowers
the cooling and dehumidifying
effects. Clean at least once
every two weeks.
20 MAINTENANCE AND SERVICE
ENGLISH
Troubleshooting
Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.
Case
Does not operate.
Explanation
See page
• Have you made a mistake in timer operation?
• Has the fuse blown or has the circuit breaker been
tripped?
• Is the power Switch at Off?
• Is the unit at the starting of Heating Operation?
If yes, Hot-start is activating.
• Is the unit in the Deicing?
If yes, wait for finishing the Deicing.
-
The room has a peculiar odor.
• Check that this is not a damp smell exuded by the
walls, carpet, furniture, or cloth items in the room.
-
It seems that condensation is leaking from
the air conditioner.
• Condensation occurs when the airflow from the air
conditioner cools the warm room air.
-
Air conditioner does
• This is the Protection device of the air conditioner .
not operate for about 3 • Wait about three minutes and operation will begin.
minutes when
• If the airflow begins before its temperature become
restarted.
warm, it will cause an undesired cooling effect. In
order to prevent this, the airflow will not begin until it
is sufficiently warm.
Does not cool or heat
effectively.
The air conditioner operation is noisy.
Remote controller display is faint, or no display at all.
• Is the air filter dirty? See air filter cleaning instructions.
-
18
• The room may have been very hot when the room air
conditioner was first turned on. Allow time for it to
cool down.
-
• Has the temperature been set incorrectly?
• Are the indoor unit's air inlet or outlet vents obstructed?
-
• For a noise that sounds like water flowing.
-This is the sound of freon flowing inside the air conditioner unit.
• For a noise that sounds like the compressed air releasing into atmosphere.
-This is the sound of the dehumidifying water being
processed inside the air conditioning unit.
-
• Are the batteries depleted?
• Are the batteries inserted in the opposite (+) and (-)
directions?
12
Download PDF

advertising