LG | GN-Y331SLBB | LG GR-Y331SLZB Owner’s Manual

ENGLISH
Owner ’s Manual
REFRIGERATOR
Please read carefully the manual instruction and safety caution
before operating your refrigerator and retain it for future reference
www.lg.com
P/No. : MFL69887002
Copyright © 2017 LG Electronics Inc. All Rights Reserved
CONTENTS
IMPORTANT SAFETY INFORMATION .......... 3
INSTALLATION ................................................. 9
FEATURE CHART ............................................ 10
OPERATION ...................................................... 11
Starting
Temperature Control
Ice Making
Defrosting
Water Dispenser (Optional)
SUGGESTIONS ON FOOD STORAGE ........... 13
CLEANING .......................................................... 14
GENERAL INFORMATION ............................... 16
LAMP REPLACEMENT ..................................... 16
IMPORTANT WARNINGS ................................ 17
BEFORE CALLING FOR SERVICE ................. 18
EARTH/ GROUNDING CONSTRUCTION
(OPTIONAL) ................................................... 19
2
IMPORTANT SAFETY INFORMATION
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartment of the
appliance, unless they are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require
special disposal procedures. When disposal, please consult with services
agent or a similarly qualified person.
This appliance contains a small amount of isobutane refrigerant (R600a),
natural gas with high environmental compatibility, but it is also combustible.
When transporting and installing the appliance, care should be taken to ensure
that no parts of the refrigerating circuit are damaged. Refrigerant squirting out
of the pipes could ignite or cause an eye injury. if a leak is detected, avoid any
naked flames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
In order to avoid the creation of a flammable gas air mixture if a leak in the
refrigerating circuit occurs, the size of the room in which the appliance
may be sited depends on the amount of refrigerant used. The room must be
2
1 m in size for every 8g of R600a refrigerant inside the appliance. The amount
of refrigerant in your particular appliance is shown on the identification plate
inside the appliance. Never start up an appliance showing any signs of damage.
if in doubt, consult your dealer.
3
IMPORTANT SAFETY INFORMATION
BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages. Always read and obey all safety
messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazard
that can hurt you or others or cause damage to the product. All safety messages will be
preceded by the safety alert symbol and the hazard signal word WARNING, or CAUTION.
These words mean:
WARNING
You will be hurt or seriously injured if you don't follow instructions.
CAUTION
indicates an imminently hazardous situation which, if not avoided, may
result in minor or moderate injury, or product damage only.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell
you what canhappen if the instructions are not followed.
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety
precautions should be followed, including the following.
Read all instructions before using this appliance.
1. When connecting the power
Do not use many power outlets.
• Using several devices at
one outlet may cause fire.
• The electric leakage
breaker may damage food
and the dispenser may be
leaked.
Prevent the power cord from being
squeezed or imprinted if the refrigerator is
pushed in after the power plug is extracted
during the installation.
It becomes the cause of fire or electric shock.
Do not allow the power plug to face upward
or to be squeezed at
the back of the
refrigerator.
Water may be flown into
or the plug may be
damaged, which causes
fire or electric shock.
Do not allow the power cord bent or pressed
by the heavy object to
be damaged.
It may damage the power
cord to cause fire or
electric shock.
4
IMPORTANT SAFETY INFORMATION
1. When connecting the power
Unplug the power plug when cleaning or
handling the refrigerator.
Do not pull out the cord or touch the power
• It may cause electric shock or injury.
• It may cause electric
Remove water or dust from the power plug
and insert it with the ends of the pins
securely connected.
Make sure of grounding.
Dust, water or unstable
connection may fire or
electric shock.
plug with wet hands.
shock or injury.
The incorrect grounding
may cause breakdown
and electric shock.
Ground
Wire
More than
30 inches
Copper
Flat
When the power cord or the power plug is
damaged or the holes of
the outlet are loosed, do
not use them.
It may cause electric shock or
short circuit to make fire.
2. When using the refrigerator
Do not place the heavy object or the
dangerous object
(container with liquid) on
the refrigerator.
It may be dropped to cause
injury, fire or electric shock when
opening or closing the door.
Do not install the refrigerator in the wet
place or the place which
water or rain splashes.
Deterioration of insulation of
electric parts may cause
electric leakage.
Do not cling to the door or the shelves of the
door or the home bar of the freezer or the
cool chamber.
It may make the refrigerator
fallen down or damage the
hands. Especially, do not
allow the children to do the
above.
Do not use or store inflammable materials
ether, benzene, alcohol, medicine, LP gas,
spray or cosmetics
near or in the
refrigerator.
Ether
Thinner
5
Benzene
It may cause explosion
or fire.
IMPORTANT SAFETY INFORMATION
2. When using the refrigerator
Do not place the lit candle within the
refrigerator to deodorize.
Do not store the medicine or the academic
materials at the refrigerator.
It may cause explosion or fire.
When the material with
the strict temperature
control is stored, it may be
deteriorated or it may
make an unexpected
reaction to cause any risk.
Do not use the combustible spray near the
refrigerator.
The Academic
Medicine
dicine
The Me
Avoid the heating devices.
It may cause fire.
It may cause fire.
Do not use the submerged refrigerator
directly, kindly checked by the technician.
Do not place flower vase, cup, cosmetics,
medicine or any container
with water on the
refrigerator.
It may cause electric
shock or fire.
It may cause fire, electric shock
or injury by dropping down.
Do not spray water at the outside or the
inside of the refrigerator or do not clean it
with benzene or
thinner.
Thinner
Deterioration of insulation of
electric parts may cause
electric shock or fire.
When gas is leaked, do not touch the
refrigerator or the air outlet and ventilate the
room immediately.
- The explosion by spark may cause fire or burn.
- Because this refrigerator uses natural gas as the
environtment-friendly refrigerant, even as small
amount is combustible. When the gas is leaked
by the severe damage during delivering,
installing or using the refrigerator, any spark may
cause fire or burn.
When any strange smell or smoke is
detected from the refrigerator, disconnect
the power plug
Service
center
immediately and
contact to the
service center.
It may cause fire.
Always prevent children from entering
the product.
It may endanger the life of a
child if the child enters the
refrigerator.
6
IMPORTANT SAFETY INFORMATION
2. When using the refrigerator
Do not allow any person except the qualified
engineer to disassemble, repair or alter the
refrigerator.
Do not use the refrigerator for non-domestic
purpose (storing medicine or testing
material, using at the ship, etc.).
It may cause injury,
electric shock or fire.
It may cause an unexpected
risk such as fire, electric
shock, deterioration of
stored material or chemical
reaction.
When disposing the refrigerator, remove the
packing materials from
the door.
Install the refrigerator on the solid and level
floor.
It may cause to lock out the
child.
Do not insert the hands or the metal stick
into the exit of cool air, the cover, the bottom
of the refrigerator, the heatproof grill
(exhaust hole) at the
backside.
It may cause electric
shock or injury.
Installing it on the unstable
place may cause death by
falling down the refrigerator
when opening or closing the
door.
When you want to dispose the refrigerator,
contact to the down-block office.
When you want to dispose
the large living waste such
as electric home appliance
and furniture, you'd better
contact the local downblock office.
Down-block
office
CAUTION
Violating this direction may cause injury or damage house or furniture. Always be careful, please.
Do not touch food or containers at the
freezer with wet
hands.
It may cause frostbite
Wait for 5 minutes or longer when
reconnecting the plug.
It may cause the operation
of the freezer to fail.
After
5minutes
7
IMPORTANT SAFETY INFORMATION
CAUTION
Violating this direction may cause injury or damage house or furniture. Always be careful, please.
Pull out the power plug not by grasping the
cord but the plug of its
end.
Do not put bottle in the freezer.
It may freeze the contents to
break the bottle to cause
injury.
It may cause electric shock or
short circuit to fire.
Do not install the refrigerator in the wet
place or the place which water or rain
splashes.
Deterioration of insulation of
electric parts may cause
electric leakage.
Do not insert the hands into the bottom of
the refrigerator.
The iron plate of the bottom
may cause injury.
Carry the refrigerator with the handle bar at
the bottom of the front and the top of the
rear.
Because opening or closing the door of the
refrigerator may cause injury to the person
around it, be careful, please.
Otherwise, your hands
may be slipped to cause
injury.
Opening or closing the
door may cause feet or
hands to be caught in
the chink in door or the
child to be get hurt by
the corner.
Do not put any living animal in the
refrigerator.
Use only water. If any other liquid is used,
the operation of the system may be
deteriorated. If a problem occurs by using
any liquid other than
water, the
Only water
manufacturer will not
be responsible.
It may cause the animal
died.
Water Tank
Do not use the carbonated water. The gas
d
pressure may cause
te
na r
bo ate
r
leakage.
a
C W
Fill with potable water only.
Clean the water tank according to the
instruction before using the water tank.
Water Tank
Water Tank
8
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION,
AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to
use.
For stand base model (optional)
2.Avoid placing the unit near heat sources,
direct sunlight or moisture.
3. Air must circulate properly around your
refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25 cm) or
greater clearance above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5 cm) from the floor, especially if the floor is
carpeted.
4.To avoid vibrations, the unit must be level.
If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the
rear to aid in door closing.
Leveling screws can be turned easily by
tipping the cabinet slightly.
Turn the leveling screws clockwise(
) to
raise the unit, counterclockwise(
) to
lower it (If stand base is not used).
5. Don't install this appliance below 5°C. It may
cause the debasement of the refrigerator.
6 . When use stand base (optional) put
refrigerator on smooth/ flat floor.
It is requiring smooth/flat floor to get good
product standing.
After install stand base (1) with refrigerator,
install screws (3) into compressor base (2)
and make it break through stand base body
(1) to get a good stability.
3
1
2
1. Stand base
2. Compressor base
3. Screws (avalilable in owner manual assembly)
NEXT
1. Clean your refrigerator thoroughly and wipe
off all dust accumulated during shipping.
2. Install accessories such as ice cube box, etc.,
in their proper places. They are packed
together to prevent possible damage during
shipment.
3. Connect the power supply cord (or plug) to
the outlet. Don't double up with other
appliances on the same outlet.
4. Prior to storing food, leave your refrigerator
on for 2 or 3 hours.
9
FEATURE CHART
Water Dispenser
(Optional)
FREEZER ROOM
REFRIGERATOR ROOM
Temperature
Control Knob/
Defrost Button
Frezh Zone
For Fresh Meat
Lamp Cover
Bottle Rack
Stand base
Levelling Screw
(Optional)
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
- When use stand base put refrigerator on smooth/flat floor.
It is requiring smooth/flat floor to get good product standing.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food, and
lead to higher electric bills.
- Do not open the door frequently. Opening the door lets warm air enter the refrigerator, and cause
temperature to rise.
10
OPERATIONS
STARTING
Please turn at position COLDER for first operation. Let your refrigerator running unload within 2-3
hours to stabilize the operation temperature.
If it is interrupted, please restart again after a pause for 5 minutes.
TEMPERATURE CONTROL
The default setting of the temperature control knob for the
refrigerator compartment is " COLDER ".
For colder temperatures, adjust the control knob to " COLDEST",
and for warmer temperatures, adjust the control knob to
“WARM” position.
ICE MAKING
To make ice cubes, fill the ice cube tray with w ater to
slightly below the rim and place it in the freezer.
Set temperature control on COLDEST position, and
return to COLDER position after finish to save energy.
To remove ice cubes, hold the tray at its end and twist
gently.
TIP
To remove ice cubes easily, run water
on the tray before twisting.
DEFROSTING
It is necessar y to regularly defrost your refrigerator in order to
ensure efficient operation. The frost on the surface of evaporator
should not exceed 6 mm before defrosting.
To defrost, press the defrost button (blue button).
Remove food from the evaporator before you start
defrosting operation.
When defrosting complete, defrosting button will return to
normal position automatically. Remove the drip tray, empty water,
dry and put it back to its normal position.
11
OPERATIONS
WATER DISPENSER (OPTIONAL)
NOTE
●
●
●
Put water after the water tank being in position. Necessarilly separate the water tank to
clean it or not use it.
When the water tank is not position after filling it with water, water can leak out by the
valve pushed.
Cover Cap
Putting water in the water tank
1. Open the cover cap and pour water into the
water tank.
2. Close the cover cap.
Caution
Do not use anything other than water including.
Hot water needs to be cooled before being put
in the water tank.
●
Drinking
1. Press the dispenser pad with cup.
2. The water is released when the dispenser pad is
pressed. The pad returns to its original position when
the cup is removed and the water stops its flow.
12
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
Store fresh food in the refrigerator compartment. How food is frozen and thawed is an important
factor in maintaining its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and
melons.
Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food, and
lead to higher electric bills!
When storing the food, cover it with vinyl wrap or store in a container with a lid. This prevents moisture
from evaporating, and helps food to keep its taste and nutrients.
Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator temperatures
even.
Do not open the door frequently. Opening the door lets warm air enter the refrigerator, and cause
temperatures to rise.
FREEZER COMPARTMENT
Do not store bottles in the freezer compartment - they may break when frozen.
Do not refreeze food that has been thawed. This causes loss of taste and nutrition.
When storing frozen food like ice cream for a long period, place it on the freezer shelf, not in the door
rack.
REFRIGERATOR COMPARTMENT
Avoid placing moist food on deep interior refrigerator shelves, it could freeze upon direct contact with
chilled air. To avoid this it is better to store food in the covered container.
Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped, and
packed food should be wiped clean, to prevent adjacent food from spoiling.
When storing eggs in their storage rack, ensure that they are fresh, and always store them in a
up-right position, which keeps them fresh longer.
13
CLEANING
It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be wipe up
immediately, since it may acidify and stain plastic surfaces
if allowed to settle.
Never use metallic scouring pads, brushes, coarse abrasive
cleaners or strong alkaline solutions on any surface.
INTERIOR PARTS - Wash compartment shelves, door
racks, storage trays and magnetic door seals etc. Use a
lukewarm solution of mild soap or dish washable solution to
clean the durable finish of your refrigerator. Wipe with a
clean damp cloth and then dry.
Before you clean, however, remember that damp objects
will stick or adhere to extremely cold surfaces. Do not touch
frozen surfaces with wet or damp hands.
WARNING
Always remove power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts(lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or
cloth to prevent water or liquid from getting
into any electrical part and causing electric
shock. Do not use flammable or toxic cleaning
liquids.
• Caution for Cleaning Not in use : Surface
active agent, Car wax, Anticorrosive, All sorts
of oil, Gasoline, Acids, Wax.
• Usable Detergent Vegetable dish washable
solution, Soapy water.
• When careless using, it can occur a color
change.
EXTERIOR - Use a lukewarm solution of mild soap or
dish washable solution to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and then dry.
For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild Detergent in warm water.
Do not use abrasive or harsh cleaners. Dry thoroughly with
a Soft cloth. Do not use appliance wax, bleach, or other
products containing chlorine on stainless steel.
INTERIOR - Regular cleaning of the interior and interior
parts is recommended. Use a lukewarm solution of mild
soap or dish washable solution to clean the durable finish
of your refrigerator. Wipe with a clean, damp cloth and then
dry.
14
CLEANING
WATER DISPENSER (OPTIONAL)
Grille Wipe with a wet cloth, and dry with a dry cloth.
Water Tank 1. Putting the Water
Is not necessary to remove the water tank in order to supply
it (it could be filled like shows fig. 1 pulling the tank gate).
fig. 1
NOTE
- Before closing door, close the cap and clamp tightly.
- Do not use liquids containing sugar or carbonated drinks like soda
2. Disassembly
Lift the water tank, gripping a side and bottom of water tank.
fig. 2
NOTE
When disassemble Water Tank, use all waterinside dispenser first.
fig. 3
3. Assembly
If by some cause removes the water tank, place again the water
tank on its original position. Verify that the valve assembly
correctly in the hole of the door (fig. 3,4). Once assembled push
down and check the tank position with line.
fig. 4
Water Tank 1. Remove the tank cover.
3. Clean the inside and outside of the cap
with diswashing detergent and rinse
throughly under running water. Dry the water
with a cloth.
2. Clean the inside and outside of the water tank
with diswashing detergent and rinse
throughly under running water. Dry the water
with a cloth.
Caution
1. Use lukewarm water when cleaning.
2. Do not use anything other than water. If it is
used with soft drinks,put water in the water
tank and discharge three or four cups of
water shortly.
15
GENERAL INFORMATION
VACATION TIME
IF YOU MOVE
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave each door OPEN
to prevent odor formation.
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screw(s), turn them
all the way into the base.
ANTI-CONDENSATION PIPE
The outside wall of the refrigerator cabinet may
sometimes get warm,
especially just after
Most power failures are corrected in an hour or two installation.
and will not affect your refrigerator temperatures.
Don't be alarmed.
However, you should minimize the number of door This is due to the antiopenings while the power is off. During power
condensation pipe, which
failures of longer duration, place a block of dry ice on pumps hot refrigerant to
top of your frozen packages.
prevent "sweating" on the
outer cabinet wall.
POWER FAILURE
This appliance is intended to be used in
household and similar applications such as:
- Staff kitchen areas in shops, offices and
other working environments.
- Farm houses and by clients in hotels, motels
and other residential type environments.
- Bed and breakfast type environments.
- Catering and similar non-retail applications.
LAMP REPLACEMENT
NOTE
●
This product applies LED Lamp which can not be replaced by the user.
Please contact authorized service centre for the lamp replacement.
16
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
ABOUT GROUNDING (EARTHING)
Use this appliance on a dedicated circuit; that is,
an outlet that is the only outlet on the circuit.
Overloading a circuit causes low voltage,
malfunction, possible damage to the equipment,
and poor cooling capacity.
Check your local electric code or consult a
qualified electrician if you have questions.
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
In order to prevent possible electric shock, this
appliance must be grounded.
Improper use of the grounding plug can result in
an electric shock. Consult a qualified electrician or
service person if the grounding instructions are not
completely understood, or if you have doubts on
whether the appliance is properly grounded.
ACCESSIBILITY SUPPLY PLUG
The refrigerator-freezer should be so positioned
that the supply plug is accessible for quick
disconnection if an accident happens.
DO NOT MODIFY OR EXTEND THE
POWER CORD LENGTH
It will cause electric shock
or fire.
SUPPLY CORD REPLACEMENT
If the supply cord is damaged, it must be replaced
by the manufacturer or replacement or a similarly
qualified person in order to avoid a hazard.
VERY DANGEROUS ATTRACTION
This appliance must be grounded (earthed).
DON'T WAIT! DO IT NOW!
An empty refrigerator can be a dangerous
attraction to children. Remove either gaskets,
latches, lids or the entire door from your
unused appliance, or take some other action
to make it harmless.
Do not store inflammable materials, explosives
or chemicals in the refrigerator.
Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
WARNING
This appliance is not intended for use by person (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
DISPOSAL OF THE OLD APPLIANCE
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are
reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be
reused after rework (recycling). For take back, please contact with the local agency.
17
BEFORE CALLING FOR SERVICE
SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE
POSSIBLE CAUSES FIRST :
PROBLEM
POSSIBLE CAUSES
REFRIGERATOR DOES
NOT OPERATE
●
REFRIGERATOR OR FREEZER
COMPARTMENT TEMPERATURE
TOO WARM
●
ABNORMAL NOISE(S)
REFRIGERATOR
HAS ODOR
DEW FORMS ON THE
CABINET SURFACE
●
Has a house fuse blown or circuit breaker tripped?
Has the power cord plug been removed or loosened
from the electrical wall outlet?
Temperature control not set on proper position.
Appliance is placed close to wall or heat source.
● Warm weather-frequent door openings.
● Door left open for a long time.
● Large amount of foods are kept in the refrigerator.
●
Refrigerator is installed in a weak or uneven place, or
leveling screw needs adjusting.
● Unnecessary objects placed in the back side of the
refrigerator.
●
Foods with strong odors should be tightly covered or
wrapped.
● Interior needs cleaning.
●
●
●
Not unusual during periods of high humidity.
Door may have been left ajar.
18
It is recommended to install the earth to prevent electric shock in
case of electricity leakage.
How to connect the earth wire:
• Connect the earth wire's metal ring end to the earth screw
on the back of the refrigerator.
• Peel off the cable sheath/insulation at the other end of the earth wire. Attach the peeled wire
to a metal screw/nail and then drive it through the wall or ground.
Do not connect the earth wire to the following locations.
• Gas pipe
It could produce sparks which lead to fire and explosion.
• Telephone earth wire and lightning rod
It is dangerous during lightning.
• Water pipe and water tap
The earth wire connection will not work when the middle of the water pipe is made of plastic.
If it is connected to a metal water pipe, it could cause someone to be electrocuted.
When installing the product in a humid or wet location, you must install the earth wire.
Ex) • Unfloored or dirt floored room (Room with dirt and no floor), concrete floor
• Location where it can get wet such as near the sink
• Location where water can leak or is humid such as basement
• Other wet or humid location
Especially, for locations where it always get wet such as near the restaurant sink, you are obligated by
the law to install a circuit breaker in addition to the earth wire.
After consulting with your retailer or electric construction company, you must do the earth wire
construction (Type 3 earth construction). Please note that earth construction could incur extra fees.
19
Download PDF

advertising