OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
CM9960 (CM9960, CMS9960F)
*MFL69365147*
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open the
enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, fire or
the like.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Note: Do not look directly at the light emitting part
when the LIGHTING is turned on.
If the illumination brightness is glaring, switch on the
room lights or turn off the LIGHTING of the unit.
1
Getting Started
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
3
4
Table of Contents
Table of Contents
1
Getting Started
2
6
7
7
7
7
8
10
10
11
Safety Information
Unique Features
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Front panel
Rear panel
Top panel
2Connecting
13
13
13
14
14
15
15
16
How to Affix the Ferrite Core
– About Ferrite Core
Connecting to speakers
Optional Equipment Connection
– AUX IN Connection
– PORT. IN Connection
– USB Connection
– Antenna Connection
3Operating
17
17
17
18
19
19
19
19
20
20
20
21
21
22
22
Basic Operations
– CD/USB Operations
– Auto Play
– Selecting a folder and an MP3/WMA file
– Deleting an MP3/WMA file
Playback Effect
– DJ EFFECT
– SCRATCH Effect
– AUTO DJ
– DJ PRO
– Adjusting TEMPO
– MIX
– AUTO SYNC
Using BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
24 Using the Music Flow Bluetooth App
24 – About “Music Flow Bluetooth” App
24 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
25 – Activate Bluetooth with “Music Flow
Bluetooth” App
26 Radio Operations
26 – Listening to the radio
26 – Improving poor FM reception
26 – Presetting the Radio Stations
26 – Deleting all the saved stations
27 Sound adjustment
27 – Setting the sound mode
27 – Setting the USER EQ
28 Advanced Operations
28 – Recording to USB
30 – JUKE BOX Playback
31 Other Operations
31 – Turn off the sound temporarily
31 – CHILDSAFE Mode
31 – Displaying file information (ID3 TAG)
31 – DEMO
31 – Using Microphone
32 – Using H/P MODE
32 – VOICE CANCELLER
33 – KEY CHANGER
33 – Lighting Effects
33 – PARTY THRUSTER
33 Setting the Clock
Table of Contents
– Setting the Clock through “Music Flow
Bluetooth” App
33 – Using your player as an alarm clock
34 – Sleep Timer Setting
34 – Dimmer
34 Auto power down
35 – AUTO POWER On
35 – Auto function change
36 LG Sound Sync
37 WIRELESS PARTY LINK Connection
5
33
1
2
4Troubleshooting
38 Troubleshooting
38 – General
3
5Appendix
40
41
41
42
42
42
General specifications
Speakers specifications
Trademarks and Licenses
Maintenance
– Notes on Discs
– Handling the Unit
4
5
6
Getting Started
Unique Features
1
Bluetooth®
Getting Started
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to page 24.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started
7
Playable file
Requirement
Compatible USB Devices
Music file requirement
yy The USB function of this unit does not support all
USB devices.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Data CD : 999 / USB : 2000
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy Maximum folders : Data CD : 99 / USB : 200
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy File extensions : “.mp3”/ “.wma”
yy To prevent data loss, back up all data.
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy CD-ROM file format : ISO 9660/ JOLIET
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
yy This unit recognizes up to 2,000 files.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
MP3/WMA file compatibility with this unit is limited
as follows.
yy MP3 Player : Flash type MP3 player.
8
Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby/On) : Switches the unit ON or OFF.
B (Open/Close) : Opens and closes the disc tray.
VOL (Volume) +/- : Adjusts speaker volume.
1
Getting Started
F (Function) : Selects the function and input source.
(Mute): Mutes the sound.
PRESET·FOLDER W/S :
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
-- Chooses a preset number for a radio station.
JUKEBOX/MEMORY :
-- Stores radio stations.
-- Deletes all the saved stations.
-- Selects JUKE BOX mode.
-- Makes your favorites list.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 20)
DELETE :
-- Deletes MP3/WMA files. (USB only).
-- Deletes a song on the programmed list.
Replacement of battery
(R03
)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Getting Started
9
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT : Listens to your tracks/files repeatedly or
randomly.
0 to 9 numerical buttons : Selects numbered tracks,
files, or preset number.
TUNING-/+ : Selects the radio stations.
CLOCK : Sets a clock and checks a time.
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
ALARM : With the ALARM function you can turn CD,
USB play and Tuner reception on at a desired time.
-- Searches for a section within a track/file.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
d/M (Play/Pause) :
VOICE CANCELLER : You can enjoy the function
while playing the music, by reducing singer vocal of
music in the various source.
-- Starts or pauses playback.
-- Selects STEREO/MONO.
Z (Stop):
-- Stops playback or recording.
-- Cancels DELETE function.
SOUND EFFECT : Chooses sound impressions.
REGION EQ : Chooses region equalizer.
INFO / SLEEP
-- Sees informations about your music. An MP3 file
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- In status of WIRELESS PARTY LINK Connection,
device name of SLAVE unit appears in the MASTER
unit and Device name of MASTER unit appears in
the SLAVE unit.
-- Press and hold to set the system to turn off
automatically at a specified time.
(Dimmer : The display window will be darkened by
half.)
DJ EFFECT : Selects DJ EFFECT mode. (Refer to
page 19)
SET : Confirms the setting.
KEY CHANGER ( / ) : Changes the key to suit
your vocal range.
DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.
? : This button is not available.
USB REC : USB direct recording.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
10 Getting Started
Front panel
a
1
Getting Started
b c d
e
f
eDANCE LIGHTING (Lighting ball)
- Shows the various lighting patterns and color.
- You can control angle up and down with your
finger.
aDisc tray
b
Remote Sensor
cHEADPHONE
Connects a headphone.
fMIC (Microphone) 1/2
Connects a microphone.
dPORT. (Portable) IN
Connects a portable device.
Rear panel
a
b
c
d
aPower cord
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
e
f
bAUX IN 1/2 (L/R)
cANTENNA (FM)
dR SPEAKERS
Connects the right speaker’s cables.
eL SPEAKERS
Connects the left speaker’s cables.
fSPEAKER LIGHTING
Connects the speaker lighting cables.
Getting Started 11
Top panel
32
1
zyx
1
w
v
b
u
c
d
e
f
g
t
s
r
q
h i jk
a1/!(Standby/On)
bSCRATCH / LEVEL CONTROL, SEARCH KNOB
(A SIDE)
- Turns clockwise or counterclockwise to make
the scratch sound.
- Turns clockwise or counterclockwise to control
the DJ EFFECT level.
- Turns clockwise or counterclockwise to search
to the next/previous file or next/previous folder.
(CD/USB 1 only)
cSEARCH (A SIDE)
Searches to the next/previous file or next/
previous folder by pressing SEARCH repeatedly.
(CD/USB 1 only)
dOK (A SIDE)
Selects the desired file or folder after searching a
file or folder. (CD/USB 1 only)
eH/P MODE
Presses to select a headphone monitor mode.
fH/P VOLUME
Presses to select a headphone’s volume control
mode.
gMIC (Microphone) VOLUME
Presses to select a microphone’s volume control
mode.
hBASS BLAST
Selects BASS BLAST effect directly.
iLIGHTING
Changes the lighting patterns and colors or turns
off the lighting effects of DANCE LIGHTING and
SPEAKER LIGHTING.
l
mn op
jDJ PRO PAD
Presses a desired sound pad.
kAUTO SYNC
When using MIX, you can synchronize the tempo
of audio files being played in USB 1 and USB 2 by
pressing AUTO SYNC.
lCross fader
Adjusts the sound volume of mixing files when
using MIX ON by pressing MIX.
mMIX
Mixes audio sound.
nPARTY THRUSTER
Slide the lever to create a party atmosphere.
oREGION EQ
Chooses region equalizer.
pB EJECT
Opens and closes the disc tray.
qKEY CHANGER (b/#)
Changes the key to suit your vocal range.
rVOICE CANCELLER
You can enjoy the function while playing the
music, by reducing singer vocal of music in the
various source.
sSEARCH (B SIDE)
Searches to the next/previous file or next/
previous folder by pressing SEARCH repeatedly.
(USB 2 only)
tOK (B SIDE)
Selects the desired file or folder after searching a
file or folder. (USB 2 only)
Getting Started
a
12 Getting Started
1
Getting Started
uSCRATCH / LEVEL CONTROL, SEARCH KNOB
(B SIDE)
- Turns clockwise or counterclockwise to make
the scratch sound.
- Turns clockwise or counterclockwise to control
the USER EQ level.
- Turns clockwise or counterclockwise to search
to the next/previous file or next/previous folder.
(USB 2 only)
vF (Function) / WIRELESS LINK
- Selects the function and input source.
- Press and hold for 3 seconds to select
WIRELESS PARTY LINK mode.
wUSB REC / DEMO
- Records to USB 1.
- Copys USB 2 to USB 1.
- Shows Demo mode.
xUSER EQ
Selects the sound effect created by your own.
yBasic controls (USB 2 only)
Y/U (Skip/Search)
Skips Fast backward or Forward. /
Searches for a section within a track/file.
T (Play/Pause)
Starts or pauses playback.
I (Stop)
Stops playback or cancels DELETE function.
zA / B TEMPO
Adjusts TEMPO in USB function.
VOLUME
Adjusts speaker, microphone or headphone
volume.
1USB a / USB b
You can play or record sound files by connecting
the USB device.
2Basic controls (CD / USB 1 / BLUETOOTH /
RADIO only)
Y/U (Skip/Search)
- Skips Fast backward or Forward. /
Searches for a section within a track/file.
- Selects the radio stations.
T (Play/Pause)
-Starts or pauses playback.
- Selects Stereo/Mono.
I (Stop), RDS
- Stops playback or cancels DELETE function.
- Radio Data System.
3DJ EFFECT
Selects a desired DJ effect.
Connecting 13
How to Affix the Ferrite
Core
Ferrite core may not be provided depending on each
nation’s regulations.
About Ferrite Core
Connecting to speakers
Connect the speaker cable plugs to the SPEAKERS
connector.
To connect the speaker light cable to the unit, insert
the cable to SPEAKER LIGHTING connectors on the
unit.
2
Connecting
You must affix a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the L SPEAKERS cables around the ferrite
core twice.
Wind the R SPEAKERS cables around the ferrite
core twice.
Wind the LEFT and RIGHT SPEAKER LIGHTING
cables all together around the ferrite core twice.
3. Close the ferrite core until it clicks.
>>Caution
yy Make sure that the jacks and the speakers
are matched correctly.
yy Make sure to connect the cables to
connectors tightly on the unit.
14 Connecting
>>Caution
yy Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
yy When you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
2
Connecting
yy The speakers must be placed a minimum
of 20 cm from the unit for preventing the
vibration caused by the speakers.
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 1/2 (L/R) connector.
If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
Red
20 cm
20 cm
yy Check the volume level before playing music
to prevent infirm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
Audio cable
White
yy Do not use the unit in a limited space. It may
damage a person’s hearing. It is recommended
to use it in a wide space.
yy Be careful to make sure children not to put
their hands or any objects into the opening
speaker duct hole.
yy Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yy Avoid looking at the speaker lights for a long
time. It may cause damage to eyesight.
DVD, Blu-ray player etc.
Connecting 15
PORT. IN Connection
USB Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN connector.
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
2
Connecting
Portable cable
MP3 player etc.
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN 1/2
(L/R) connector of the unit.
2. Turn the power on by pressing 1 on the remote
control or 1/! on the unit.
3.Press F on the remote control or F / WIRELESS
LINK on the unit to select AUX 1, AUX 2 or
PORTABLE function.
4. Turn on the portable player or external device and
start it playing.
,,Note
Automatically switches to the PORTABLE
function when you connect the portable device
to the PORT. IN connector.
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z on the remote control or I on
the unit twice in a row.
2. Remove the USB device from the unit.
16 Connecting
Antenna Connection
Connect the supplied FM antenna for listening to the
radio.
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
2
Connecting
,,Note
Be sure to fully extend the FM wire antenna.
Operating 17
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B on the remote
control or B EJECT on the unit or connect the
USB device to the USB port.
2. Select CD or USB function by pressing F on the
remote control or F / WIRELESS LINK on the unit.
To
Press C/V on the remote
control or Y/U on the unit to
go to the next/previous track/file.
-- During Playback,
By using C/V buttons :
Skipping to
the next/
previous
track/file
Press V on the remote control or
U on the unit to go to the next
track/file.
Playing less than 2 seconds, press
C on the remote control or Y
on the unit to go to the previous
track/file.
Playing after 3 seconds, press C
on the remote control or Y on
the unit to go to the beginning of
the track/file.
Playing
Press REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.
yy The display changes in the following order.
USB
MP3/WMA CD
Audio CD
REPEAT TRK
REPEAT TRK
REPEAT TRK
REPEAT *DIR
REPEAT DIR
-
REPEAT ALL
REPEAT ALL
REPEAT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
*DIR : Directory
yy When you play JUKE BOX list, only REPEAT
TRK and REPEAT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy The next file name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last file of playlist, etc.)
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Auto Play
-- AUDIO/MP3/WMA CD is played automatically
after disc tray is open and then closed.
-- Automatically switches to the CD function if disc
tray is open and then closed when there is no disc
in disc tray.
-- When CD or USB is inserted
-- If you press T on the A SIDE of the unit,
the function is changed to CD or USB 1 and
playback starts. (Except Bluetooth / Tuner
Function)
-- If you press T on the side B SIDE of the unit,
the function is changed to USB 2 and playback
starts. (except MIXER ON mode)
3
Operating
Do this
Press Z on the remote control or
Stop
I on the unit.
Press d/M on the remote control or
Playback
T on the unit.
Press d/M on the remote control or
Pause
T on the unit during playback.
Searching Press and hold C/V on the
for a section remote control or Y/U on the
within a track/ unit during playback and release it at
file
the point you want to listen to.
Selecting Press 0 to 9 numerical buttons on
a track/file the remote control to go to the
directly
desired file or track directly.
-- In stop status,
,,Note
18 Operating
,,Note
yy When CD or USB is inserted
-- Function is changed to CD or USB 1 if
Y/U, I, SEARCH on the A SIDE
of the unit is pressed. (Except Bluetooth/
Tuner Function)
,,Note
yy CD / USB Folders/Files are recognized as
below.
*
-- Function is changed to USB 2 if Y/U,
I, SEARCH on the B SIDE of the unit is
pressed. (Except MIXER ON mode)
Selecting a folder and
an MP3/WMA file
3
On the unit
Operating
1.Press SEARCH and rotate SCRATCH / LEVEL
CONTROL, SEARCH KNOB until a desired file
appears. You can also search a folder if you press
SEARCH again.
2. Press OK or T to play the selected file.
When you search a folder, press OK to select a
file in the folder, then press OK or T again. The
selected file is played.
On the remote control
1.Press PRESET·FOLDER W/S on the remote
control repeatedly until a desired folder appears.
2.Press d/M to play it. The first file of folder will play.
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
Operating 19
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by pressing
PRESET·FOLDER W/S on the remote control
and press DELETE.
-Press and hold DELETE to format the USB
device.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
- DEL FILE? : Deletes file
- DEL FOLDER? : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press d/M on the
remote control or press T on the unit.
If you want to exit the current mode, press Z on
the remote control or press I on the unit.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
The unit supports various sound and playback effects
: DJ EFFECT, SCRATCH, DJ PRO, AUTO DJ, TEMPO,
MIX, AUTO SYNC.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as FLANGER/
PHASER/WAH/DELAY sound effect.
1. Press DJ EFFECT to select a desired DJ EFFECT
(FLANGER, PHASER, WAH, DELAY, OFF).
2. Turn SCRATCH / LEVEL CONTROL, SEARCH
KNOB clockwise or counterclockwise to adjust
the DJ EFFECT level between 0 to 15.
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT Key is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
SCRATCH Effect
You can output and mix the sound effects of the
SCRATCH.
Rotating SCRATCH / LEVEL CONTROL, SEARCH
KNOB to mix the scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate SCRATCH /
LEVEL CONTROL, SEARCH KNOB.
3
Operating
The display changes in the following order.
Playback Effect
20 Operating
3
AUTO DJ
DJ PRO
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across tracks/files for uninterrupted
playback.
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 6 sounds effect.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings. RANDOM (AUTO DJ
RANDOM) -> REPEAT ALL (AUTO DJ SEQUENTIAL)
-> (AUTO DJ OFF)
2. Press a DJ PRO PAD (1,2,3,4,5,6) of desired
sound.
Operating
Mode
Display
Window
Description
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music is played
randomly on this
mode.
REPEAT
REPEAT ALL
(AUTO DJ
SEQUENTIAL)
The music is played
repeatedly on this
mode.
OFF
(AUTO DJ OFF)
-
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using I on the unit (or Z on the
remote control) on AUTO DJ mode, AUTO DJ
will be disable.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy During recording, AUTO DJ is not available.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
1. Press and hold DJ PRO PAD (CLUB, DRUM or
USER) to select a desired DJ PRO sound effect.
,,Note
yy If you want to use USER, you have to register
a source with “Music Flow Bluetooth” app. If
the source is not register to USER, “EMPTY”
or “NO SOUND” appears on the display
window.
yy Initial DJ PRO mode is CLUB sound effect.
yy DJ PRO mode is displayed for 3 seconds when
you press DJ PRO PAD (CLUB, DRUM or
USER).
yy The DJ PRO sound is mixed when you press a
DJ PRO PAD (1,2,3,4,5,6).
yy The currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you press a different DJ PRO PAD
(1,2,3,4,5,6) while DJ PRO sound is playing.
Adjusting TEMPO
You can adjust the Tempo for USB function 1 or 2
from 50 (MIN) to 150 (MAX).
Rotate A TEMPO to adjust the tempo for USB 1.
Rotate B TEMPO to adjust the tempo for USB 2.
,,Note
yy The tempo is set as 100 if you turn the unit
off, change the function or fully stop.
yy The tempo is kept when you pause and
resume play.
Operating 21
MIX
AUTO SYNC
You can mix audio sounds.
When using Mixing, you can synchronize the tempo
of audio files being played in USB 1 and USB 2 by
pressing AUTO SYNC.
1.Press MIX. ‘MIXER ON’ is displayed.
Select a desired Function for A SIDE and play it.
Mix is available in all functions except USB 2.
2. During playback, insert a USB device in USB port
b and play it. B SIDE is fixed as USB 2 function.
3. Move the Mix fader to adjust the sound volume
of mixed sound. Move it to the left to lower the
volume of B SIDE and move it to the right to
lower the volume of A SIDE.
,,Note
-- If you press Y/U, I or T on the
unit, it works only for each side.
-- If you press C/V, d/M or Z on the
remote control, it works for both A SIDE
and B SIDE.
-- For operating, it is recommended to use
Y/U, I or T on the unit instead
of remote control’s.
-- Numerical buttons do not work.
-- You can use H/P MODE. (Refer to page
32)
yy If you turn off the unit in the middle of mixing
process, MIX mode turns to OFF.
,,Note
yy The tempo of music being played in USB1 is
synchronized to that in USB2.
yy A TEMPO doesn’t work when AUTO SYNC is
on.
yy If USB2 fully stops or function is changed,
AUTO SYNC function is cancelled.
yy In case of below, AUTO SYNC error may occur
depending on the sound source.
-- The silent section in the beginning of the
track.
-- Intro or bridge section in which few musical
instruments appear.
-- In cases where playback speed or tempo of
the song changes.
-- In case that the data for BPM is provided
in real time, not the beginning of the song.
yy If the song is being played too fast or slow,
press and hold AUTO SYNC. ‘AUTO SYNC/
RE-ANALYZING’ is displayed.
yy AUTO SYNC is available only when USB 1 is
selected for A SIDE and USB 2 is selected
for B SIDE in MIXER ON mode and both are
being played.
3
Operating
yy In MIXER ON mode,
-- You can adjust the Tempo for USB function
1 or 2.
To stop it, press AUTO SYNC twice.
22 Operating
Using BLUETOOTH®
wireless technology
Listening to music stored on the
Bluetooth devices
About Bluetooth
Before you start the pairing procedure, make sure the
Bluetooth feature is activated on your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop, PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Codec : SBC
Pairing your unit and Bluetooth device
1. Turn on the unit.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG CM9960(XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG
CM9960(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi pairing connection is only supported
on Android or iOS devices. (Multi pairing
connection may not be supported depending
on the connected device specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi pairing.
3. When this unit is successfully connected with
your Bluetooth device, “BLUETOOTH PAIRED”
appears on the display window and change to
Bluetooth device name soon.
Operating 23
,,Note
yy "BLUETOOTH PAIRED" will momentarily
appear on the display when you connect
other devices for multi pairing.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth® technology such as
a medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
yy Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
yy You may not control the Bluetooth device
with this unit.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BLUETOOTH READY” appears on the display
window.
yy When you use the BT function, adjust the
volume to a proper level on the Bluetooth
device.
yy If it is not in the BT function, only one device
can be connected.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
3
Operating
yy When using Bluetooth® technology, you
have to make a connection between the unit
and the Bluetooth device as close as possible
and keep the distance.
However, it may not work well in certain
situations as described below :
,,Note
yy When this unit connected with multiple
Bluetooth devices, only one device which
you are playing keeps Bluetooth connection
when you change the function to the others.
24 Operating
Using the Music Flow
Bluetooth App
,,Note
yy Only Android OS is available to use “Music
Flow Bluetooth” app with this unit.
yy It is recommended to use the latest version
of app.
3
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
About “Music Flow Bluetooth”
App
Operating
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Here is introduce a few of the many features of
“Music Flow Bluetooth” app.
Multi Juke box : Your entertainment increases three
fold when you connect up to 3 Bluetooth phones at
the same time. Play music from all three phone and
create a customized playlist from all the phones.
Sampler Creator : Record effects on your
smartphone and very simply sync them via Bluetooth
to the system. Be as creative as you can be.
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
Operating 25
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
3. If you want to get more information to operate,
tap [Help] on the [Setting] menu.
yy “Music Flow Bluetooth” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
yy If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
yy When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
3
Operating
2. Tap [Menu] and select the unit you want.
,,Note
26 Operating
Radio Operations
Presetting the Radio Stations
Be sure that FM aerial is connected. (Refer to page
16)
Before tuning, make sure to turn down the volume.
Listening to the radio
1.Press F / WIRELESS LINK on the unit or F on
the remote control until FM appears in the display
window.
The last received station is tuned in.
3
Operating
2. Auto tuning :
Press and hold TUNING -/+ on the remote
control or Y/U on the A SIDE of the
unit for about two seconds until the frequency
indication starts to change, then release. Scanning
stops when the unit tunes in a station.
Or
Manual tuning :
Press TUNING -/+ on the remote control or
Y/U on the A SIDE of the unit repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press T on the CD/USB 1 of the unit or d/M on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
You can preset 50 stations for FM.
1.Press F / WIRELESS LINK on the unit or F on
the remote control until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or
Y/U on the unit.
3.Press JUKEBOX/MEMORY on the remote
control. A preset number will blink in the display
window.
4.Press PRESET·FOLDER W/S on the remote
control to select the preset number you want.
5.Press JUKEBOX/MEMORY on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER W/S or 0 to 9 numerical
buttons on the remote control.
Deleting all the saved stations
1. Press and hold JUKEBOX/MEMORY on the
remote control for two seconds.
“ERASE ALL?” will flash up on the unit display.
2.Press JUKEBOX/MEMORY on the remote
control to erase all the saved radio stations.
Operating 27
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound
fields. The displayed items for the Equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
On Display
POP
CLASSIC
ROCK
JAZZ
Reinforces the treble,
bass and surround
sound effect.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOTBALL
You can enjoy
the sound effect
FOOTBALL STADIUM.
STANDARD
You can enjoy
optimized sound.
You can select a desired sound mode by using
REGION EQ on the remote control.
On Display
FUNK, REGUETON,
SAMBA, BANDA,
MERENGUE, AXE,
SALSA, SERTANEJ,
CUMBIA, TECNO
BREGA, FORRO
ARABIC
DANGDUT
Region
Description
Latin
America
Optimized
sound effect
for the
Middle East music genre
prefered in
Indonesia
each region.
AFRO
Africa
INDIA
India
yy By pressing BASS BLAST on the unit you can
directly select BASS BLAST effect.
Setting the USER EQ
You can adjust the sound level of BASS, MIDDLE and
TREBLE as your preference.
1.Press USER EQ on the unit. “USER EQ” is
displayed.
2.Press USER EQ repeatedly until the desired
setting appears in the display window.
3
3. Rotate SCRATCH/LEVEL CONTROL, SEARCH
KNOB of B SIDE to adjust the value.
Operating
BASS BLAST
Description
,,Note
yy On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
28 Operating
Advanced Operations
,,Note
Recording to USB
yy VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
You can record a various sound source to USB 1.
(CD, AUX, PORTABLE, Tuner, USB)
yy VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
1. Connect a USB device to USB port 1 on the unit.
2.Press F / WIRELESS LINK on the unit or F on the
remote control to select a Function you want to
record.
3
Operating
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
JUKE BOX list recording - After showing the JUKE
BOX list, you can record it to USB.
(Refer to page 30)
3. Start the recording by pressing USB REC on the
remote control or USB REC/DEMO on the unit.
4. To stop recording, press and hold USB REC/
DEMO on the unit or USB REC on the remote
control.
Recording in MIXER ON mode
Recording is available in MIXER ON mode. If you
record in MIXER ON mode, the unit records the mixed
sound from that point when you press USB REC.
To select recording bit rate and speed
1. Press and hold USB REC/DEMO on the unit or
USB REC on the remote control for 3 seconds.
2.Press C/V on the remote control or
Y/U on the A SIDE of the unit to select a
bit rate.
3.Press USB REC/DEMO on the unit or USB REC
on the remote control again to set.
4.Press C/V on the remote control or
Y/U on the A SIDE of the unit to select a
desired recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC/DEMO on the unit or USB REC
on the remote control to finish the setting.
USB Copying
1. Start mixing. Refer to page 21.
You can copy audio files in USB 2 to USB 1.
2. Start the recording by pressing USB REC on the
remote control or USB REC/DEMO on the unit.
To stop recording, press and hold USB REC/
DEMO on the unit or USB REC on the remote
control to stop recording. Otherwise, the
recording continues.
1. Connect a USB device including desired sound
files to USB port b and select USB 2 Function.
Pausing recording
During recording, press USB REC/DEMO on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(Tuner/AUX/PORTABLE/MIXER mode only)
2. Connect another USB device to USB port a.
3. Press USB REC/DEMO on the unit or USB REC
on the remote control.
4. To stop recording, press and hold USB REC/
DEMO on the unit or USB REC on the remote
control.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Operating 29
,,Note
yy You can record various sound using MIC/DJ
Pro/Scratch/DJ Effect/Original Source/PARTY
THRUST sound. (Except USB Copying)
,,Note
yy It’ll be stored as follows.
AUDIO CD
MP3/WMA
The other
source*
Tuner
MIX mode
yy You can control recorded MIC sound according
to MIC volume.
yy For stable recording, the output sound level
goes down on its own when you record music
from CD to USB.
yy You can only change volume level between
MIN and 30 during recording. (Only CD
function)
* : AUX and the like.
Tuner : The current recording frequency is shown.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT”, “FILE MAX” is displayed on the
display window.
Normal mode
yy Multi card reader device or External HDD can
not be used for USB recording.
yy A file is recorded by about 512Mbyte when
you record for a long term.
yy You may not store more than 2000 files.
yy You can not record in AUTO DJ mode.
yy In case of the unsupported MP3/WMA file,
the file recording may be stopped.
,,Note
yy You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/WMA file or
Audio CD Only)
yy During recording MP3/WMA, there is no
sound.
yy On CD function, sound of MIC, DJ Pro, Scratch,
DJ Effect, PARTY THRUST sound is recorded
only during AUDIO CD X1 speed REC. It is
recorded AUDIO CD source too.
yy When you stop recording during playback, the
file that has been recorded at that time will
be stored.(Except MP3/WMA file)
MIXER ON mode
yy When Function is set to BLUETOOTH or LG
TV, recording is available in MIXER ON mode.
3
Operating
yy Do not remove the USB device or turn off
the unit during USB recording. If dose not, an
incomplete file may be made and not deleted
on PC.
30 Operating
JUKE BOX Playback
Editing JUKE BOX
JUKE BOX function enables you to make a playlist of
your favorite tracks/files from a disc or USB device
(USB 1). A playlist of up to 100 tracks/files can be
entered.
It is supported only on stop status.
Making JUKE BOX list
It is supported only on stop status.
1. Press and hold JUKEBOX / MEMORY on the
remote control to enter the edit mode.
3
2. Select a track/file by pressing C/V on the
remote control or by turning SCRATCH/LEVEL
CONTROL, SEARCH KNOB on the A SIDE of the
unit.
Operating
3.Press JUKEBOX / MEMORY to save the track/
file.
1. Press and hold JUKEBOX / MEMORY on the unit
to enter the edit mode.
2.Press PRESET·FOLDER W/S on the remote
control to select a track/file to edit.
3.Press C/V to save the track/file.
4.Press JUKEBOX / MEMORY.
5. Repeat 2 to 3 to store the other tracks/files.
6.Press JUKEBOX / MEMORY once again.
To play the JUKE BOX list, press d/M after you edit
the list.
Deleting JUKE BOX list
Deleting function only works in the edit mode.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control to
select the JUKE BOX program number.)
1. Press and hold JUKEBOX / MEMORY on the
remote control to enter the edit mode.
5.Press JUKEBOX / MEMORY once again.
3.Press DELETE while a song is selected.
To play the JUKE BOX list, press d/M after you make
the list.
,,Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press JUKEBOX / MEMORY twice on stop status.
“JUKE BOX ON” appears on the display window. To
play JUKE BOX list, press d/M on the remote control
or T on the unit.
To cancel it, press JUKEBOX / MEMORY twice. “JUKE
BOX OFF” appears on the display window.
2. Select a song by pressing PRESET·FOLDER
W/S on the remote control repeatedly.
,,Note
yy To check the status of JUKE BOX, press
JUKEBOX / MEMORY once. You can also
check it by the word “PROG.” on the display
window.
yy If there is no JUKE BOX list, “JUKE BOX
NONE” appears on the display window when
you press JUKEBOX / MEMORY.
yy JUKE BOX is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
SCRATCH/LEVEL CONTROL, SEARCH
KNOB.
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.
Operating 31
Other Operations
Turn off the sound temporarily
Press
on the remote control to mute your unit.
You can mute your unit, for example, to answer
the telephone, the mute icon “Q” is blinked in the
display window.
To cancel it, press
level.
again or change the volume
CHILDSAFE Mode
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
,,Note
In case of CD, USB or BT function, CHILDSAFE
mode does not work after about 2 minutes
from power on the unit even if this mode is
enabled.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file information,
you can display the information by pressing INFO /
SLEEP.
DEMO
In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions with demo sound in the display
window. To cancel the DEMO function, press USB
REC / DEMO once more.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
-- Without input key in 10 sec, the DEMO
will play back automatically.
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by pressing MIC
VOLUME and rotating VOLUME clockwise or
counterclockwise on the unit.
,,Note
yy When not using the microphone, set the
VOLUME to minimum or turn off the MIC and
remove the microphone from the MIC jack.
yy If the microphone is set too near the speaker,
a howling sound may be produced. In this case,
move the microphone away from the speaker
or decrease the sound level by pressing MIC
VOLUME and rotating VOLUME.
If howling occurs continuously, the protection
may apply to this unit. In this case, remove
the power cord of this unit, then connect the
power cord of this unit and turn on this unit.
yy If sound through the microphone is extremely
loud, it may be distorted. In this case, press MIC
VOLUME and rotate VOLUME to minimum.
yy If your microphone’s sound feels not loud
though MIC volume is max, you can adjust
only audio source volume lower.
-- Follow below step.
1. Press and hold VOICE CANCELLER on
the unit.
2. Reduce Audio Source Volume by rotating
VOLUME counter-clockwise on the unit.
To initialize it, power off.
3
Operating
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
,,Note
yy While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
32 Operating
Using H/P MODE
VOICE CANCELLER
Headphone monitoring is available.
You can enjoy the function while playing the music, by
reducing singer vocal of music in the various source.
Press H/P MODE to listen to music using Headphone.
Press H/P VOLUME and rotate VOLUME to adjust
the volume.
When mixing, press H/P MODE to select a
monitoring mode. You can listen to the music being
mixed or playing in Source A or Source B.
,,Note
yy It is not compatible with a 4 pole jack.
Press the VOICE CANCELLER , and “ON” will appear
in display window.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) Function.
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
3
Operating
yy If you select one source output in MIXER ON
mode, the playback effects (Except TEMPO)
are not applied to the output through the
headphone.
yy If you power off or switch to MIXER OFF, the
selected H/P MODE is cancelled.
yy This function is available to use only when a
microphone is connected.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy It is not available on the MONO source.
yy To initialize it, change the Function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
Operating 33
KEY CHANGER
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
yy To sharp the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
yy To flatten the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) Function.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6.Press SET.
yy To initialize it, change the Function, disconnect
the microphone or change the music.
7. Select the minutes by pressing C/V on
the remote control.
3
yy This function may not be initialized depending
on the status of connected devices.
8.Press SET.
Operating
Lighting Effects
This function offers a party atmosphere by operating
the lighting ball on the unit and the lighting on the
speakers.
Press LIGHTING on the unit.
OFF PEACEFUL ROMANTIC COOL
UPBEAT FIERY EXCITED DYNAMIC
HEALING SUNNY PARTY OFF ...
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains its previous mode
when you first press LIGHTING, press again
to change modes.
PARTY THRUSTER
Slide the lever to create a party atmosphere.
PARTY THRUST OFF PARTY THRUST 1
PARTY THRUST 2 PARTY THRUST CLIMAX
The lighting ball on the unit, the lighting on the
speakers, the LED lighting and the sound effect
will react according to moving the lever of PARTY
THRUSTER.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 24)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM.
3.Press C/V on the remote control to
change the hours and minutes and press SET to
save.
4.Press C/V on the remote control to select
function and press SET to save.
- Press C/V on the remote control to
select a memory No. when you select Tuner and
then, press SET.
If there is no memory No., this step is skipped.
5.Press C/V on the remote control to
change the volume and press SET to save. The
clock icon “(” shows that the alarm is set.
34 Operating
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you can
check the alarm icon “(“ by pressing CLOCK
even when the unit is turned off.
yy If you set the clock time and alarm, you can
check the alarm icon “(“ and alarm setting
information by pressing ALARM even when
the unit is turned off.
3
yy You can select ALARM ON/OFF mode by
pressing ALARM.
Operating
Sleep Timer Setting
1. Press and hold INFO / SLEEP. The display
window will be darkened by half.
2.Press INFO / SLEEP repeatedly to select delay
time between 10 and 180 minutes. After the
delay time, the unit will be turned off.
To cancel the sleep function, press INFO / SLEEP
repeatedly until “SLEEP 10” appears, and then
press INFO / SLEEP once again while “SLEEP 10” is
displayed.
,,Note
yy You can check the remaining time before the
unit is turned off.
yy Press and hold INFO / SLEEP to check or
change the remaining time.
yy You can edit the remain time when displays
the remaining time or “DIMMER”.
Dimmer
Press and hold INFO / SLEEP. The display window
will be darkened by half. To cancel it, press and hold
INFO / SLEEP and then press it repeatedly until dim
off.
,,Note
All the LED turns off when Dimmer is being
operated.
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 20 minutes.
The unit will also turn itself off after six hours if the
Main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MASTER
unit in case of WIRELESS PARTY LINK connection.
In case of SLAVE unit, Auto power down is available
after disconnection SLAVE unit and MASTER unit.
How to disconnect the wireless
network connection or the wireless
device.
Turn off the unit by pressing the power button for
more than 5 seconds.
Operating 35
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
LG TV or Bluetooth
This unit recognizes input signals such as Bluetooth
and LG TV or connected portable device, and then
changes suitable function automatically.
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device. You
can play your music.
,,Note
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
When PORT.IN connection is
connected
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
When you connect the portable device to the PORT.
IN connector, PORTABLE function is selected. Play
your music on the portable device.
yy If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an input
source when this unit is turned off.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
When LG TV is connected
,,Note
yy This function is not available during recording
or deleting.
yy This function only works with devices that
were previously connected.
3
Operating
yy Depending on the connected device, this
function may not operate.
36 Operating
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
3
1. Turn on the unit by pressing 1 on the remote
control or 1/! on the unit.
Operating
2.Press F / WIRELESS LINK on the unit or F on the
remote control until LG TV function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] -> [TV Sound output]
-> [LG Sound Sync (Wireless)]
When the TV is not connected, “LG TV READY”
appears on the display window.
If the TV and this unit are connected normally, “LG
TV PAIRED” will be appear on the display window.
,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
-- Turn off the unit.
-- Changing to a different function.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
the manufacturers or models of your TV.
yy If you connect LG Sound Sync when “Music
Flow Bluetooth” app is connected, control
through the app is available.
yy If you turned off the unit directly by pressing
1 on the remote control or 1/! on the unit,
LG Sound Sync will be disconnected. To use
this function again, you should reconnect the
TV and the unit.
yy If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and
the LG TV is connected.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
Operating 37
WIRELESS PARTY LINK
Connection
The output sound of (MASTER) unit is expanded
to (SLAVE) unit.
It is compatible with unit that supports
WIRELESS PARTY LINK.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
2. Rotate Y/U on the unit to select MASTER
or SLAVE.
- unit : Selects MASTER.
-
unit : Selects SLAVE.
Two units try to connect with each other.
3. When this unit is successfully connected each
other, “Slave Device Name CONNECTED” appears
in the MASTER unit. “CONNECTED TO Master
Device Name” appears in the SLAVE unit and
change to SLAVE soon.
yy If you using the LG Sound Sync, this function
is not available. If you connect the LG TV
Function, “NOT SUPPORT” appears in the
display window.
yy You can use microphone in the SLAVE unit
only. In case of SLAVE unit, some functions
are supported only.
yy When WIRELESS PARTY LINK is
disconnected, SLAVE unit is changed to BT
function.
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
y
WIRELESS
PARTY LINK connection will be
y
disconnected when you turn off the unit or
press and hold the F / WIRELESS LINK on
the unit for 3 seconds.
yy Sound of MASTER unit and SLAVE unit may
be different depending on playback staus or
source.
yy Check the following information when
connecting to Bluetooth.
-- You can connect only one Bluetooth
device in the MASTER unit. You cannot
connect Bluetooth device to the SLAVE
unit.
-- WIRELESS PARTY LINK connection is
only supported on Android or iOS devices.
(WIRELESS PARTY LINK connection
may not be supported depending on the
connected device specifications or OS.)
-- Removable/detachable Bluetooth
devices (ex. Dongle etc.) will not support
WIRELESS PARTY LINK connection.
-- When WIRELESS PARTY LINK is
connected, Bluetooth connection is not
available in status of recording or deleting.
3
Operating
1. Press and hold F / WIRELESS LINK on the
unit for 3 seconds. PARTY LINK MODE SELECT
appears in the display window.
,,Note
38 Troubleshooting
Troubleshooting
General
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not work
properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
No Power.
4
No sound.
Troubleshooting
The unit does not start
playback.
yy The power cord is not plugged in. Plug in the power cord.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
yy Check whether you select right function.
Press function button and check the selected function.
yy Check to see if the Speakers are connected correctly. Speaker cables connected
correctly.
yy An unplayable disc is inserted. Check the playable disc.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to page 42)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 26 for details.
Troubleshooting 39
Problem
Cause & Solution
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
LG Sound Sync does not
work.
yy Check whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
yy Check the speaker light effects by pressing LIGHTING.
yy Check whether your LG TV supports LG Sound Sync.
yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
4
Troubleshooting
40 Appendix
General specifications
General
Power requirements
Refer to the main label on the unit.
Refer to the main label on the unit.
Power consumption
Networked standby : 0,5 W
(If all network ports are activated.)
Dimensions (W x H x D)
Approx. 470 mm x 240 mm x 420 mm
Net Weight
Approx. 7,7 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
60 %
Inputs
Analog audio in (AUX IN)
2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
Portable in (PORT. IN)
1.4 Vrms (3.5 mm stereo jack) x 1
Microphone (MIC 1/2)
Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range
5
87,5 to 108.0 MHz or 87,50 to 108,00 MHz
Appendix
System
Frequency Response
40 to 20,000 Hz
Signal-to-noise ratio
More than 75 dB
Dynamic range
More than 80 dB
Bus Power Supply (USB)
5 V 0 500 mA
Amplifier (RMS Output power)
Total output
4,800 W
HIGH
1200 W X 2 (8 Ω at 1 kHz, 25 % THD)
LOW
1200 W X 2 (8 Ω at 70 Hz, 25 % THD)
yy Design and specifications are subject to change without notice.
Appendix 41
Speakers specifications
Front speaker
Type
Impedance
Rated Input Power
Max. Input power
HIGH : 3 Way 3 Speaker
LOW : 1 Way 1Speaker
HIGH : 8 Ω
LOW : 8 Ω
HIGH : 1200 W
LOW : 1200 W
HIGH : 2400 W
LOW : 2400 W
Net Dimensions (W x H x D)
Approx. 508 mm x 711 mm x 470 mm
Net Weight
Approx. 30.2 kg
yy Design and specifications are subject to change without notice.
Trademarks and Licenses
5
Other trademarks and trade names are those of their respective owners.
Appendix
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG
Electronics is under license.
42 Appendix
Maintenance
Handling the Unit
When shipping the unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period of
time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
5
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Maintaining the Unit
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.
Download PDF

advertising