LG | DM5330 | LG DM5230 Owner’s Manual

ENGLISH
OWNER’S MANUAL
DVD MINI HI-FI SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
DM5430 (DM5430, DMS5430V)
DM5330 (DM5330, DMS5330V)
DM5230 (DM5230, DMS5230V)
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Getting Started
3
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
4
Table of Contents
Table of Contents
20 – OTHERS
4Operating
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
6Introduction
6
– Playable Discs
6
7
7
7
7
7
8
8
8
9
10
12
– About the & Symbol Display
– Symbol Used in this Manual
– Regional Codes
Playable file Requirement
– MP3/WMA music file requirement
– Compatible USB Devices
– USB device requirement
– Photo file requirement
– DivX file requirement
Remote control
Front panel
Rear panel
2Connecting
13
13
13
14
14
15
15
15
16
17
17
17
Connecting to speakers
– Attaching the speakers to the unit
Antenna Connection
Connections to Your TV
– Video Connection
– Component Video Connection
Optional Equipment Connection
– AUX In Connection
– USB Connection
Adjust the Setup settings
– OSD Initial language settings Optional
– To display and exit the Setup Menu
3 System setting
18
18
19
19
– LANGUAGE
– DISPLAY
– AUDIO
– LOCK (Parental Control)
21
21
22
22
22
22
22
22
23
23
23
23
23
24
24
24
25
25
25
25
25
25
25
26
26
27
27
27
27
27
28
28
28
29
29
29
Basic Operations
– Disc/USB Operations
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– Selecting a subtitle language
– 1.5 times speed playback
– Starting play from selected
time
– Last Scene Memory
– Changing the character set to display
DivX® subtitle correctly - optional
– Creating your own program
– Viewing a PHOTO file
– Viewing a PHOTO file as a slide show
– Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
– DEMO
– Turning off the sound temporarily
– Screen Saver
– System Select - Optional
– Displaying file information
(ID3 TAG)
– Using Microphone
– VOCAL FADER
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Improving poor FM reception
Sound adjustment
– Setting the surround mode
– Setting the USER EQ
Advanced Operations
– Listening to music from your external
device
– Recording to USB
Table of Contents
5
5Troubleshooting
30Troubleshooting
6Appendix
31Specifications
33Maintenance
33 – Handling the Unit
33 – Notes on Discs
33 Trademarks and Licenses
34 Language Codes
35 Area Codes
1
2
3
4
5
6
1
Getting Started
Getting Started
Unique Features
Introduction
USB Direct Recording
Playable Discs
Records music to your USB device.
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG files. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
Accessories
Please check and identify the supplied accessories.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
Video cable (1)
FM antenna (1)
Video mode and finalized only
DVD-RW (8 cm / 12 cm disc)
Video mode and finalized only
DVD+R: Video mode only
Remote control (1)
Battery (1)
Supports the double layer disc also
DVD+RW (8 cm / 12 cm disc)
Video mode and finalized only
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
AM antenna (1)
About the & Symbol Display
“&” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that disc.
Getting Started
Symbol Used in this Manual
DVD and finalized DVD±R/RW
r
y
MP3/WMA files, Audio CDs
u
JPG files
i
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Playable file
Requirement
1
MP3/WMA music file
requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
yy Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48
kHz (WMA)
yy Bit rate : 32 - 320 kbps (MP3), 40 - 192 kbps
(WMA)
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO9660/ JOLIET
yy We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
yy You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File
System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system
for Windows Vista)
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
evices that support USB2.0 or
yy USB Flash Drive : D
USB1.1.
yy The USB function of this unit does not support
all USB devices.
Getting Started
DivX files
7
8
1
Getting Started
USB device requirement
DivX file requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
DivX file compatibility with this unit is limited as
follows :
Getting Started
yy Do not extract the USB device while in operation.
yy Available resolution:
up to 800 x 600 (W x H) pixels.
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy The file name of the DivX subtitle should be
entered 45 characters or less.
yy To prevent data loss, back up all data.
yy If there is a code impossible to express in the
DivX file, it may be displayed as a “ _ “ mark on
the display.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy This unit is not supported when the total
number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
Photo file requirement
Photo file compatibility with this unit is limited as
follows :
yy Max pixel in width :
Normal : 5120 x 3840
Progressive JPEG : 2048 x 1536
yy Frame rate : less than 30 fps.
yy If the video and audio structure of recorded
files are not interleaved, either video or audio is
output.
yy Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
yy Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
yy Playable Codec format :
“DIVX3.11”, “DIVX4”, “DIVX5”,
“MP4V3”, “3IVX”.
yy Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
yy Sampling frequency : between 32 to 48 kHz
(MP3), between 32 to 48 kHz (WMA)
yy Maximum files : Under 999
yy Bit rate : between 32 to 320 kbps (MP3), 40 to
192 kbps (WMA)
yy Some discs may not operate due to a different
recording format or the condition of disc.
yy For Discs formatted in Live file system, you can
not use it on this unit.
yy File extensions : “.jpg”
yy If the name of movie file is different from that of
the subtitle file, during playback of a DivX file,
subtitle may not be display.
yy CD-ROM file format : ISO9660 LEVEL 1/ JOLIET
yy If you play a DivX file differ from DivX spec, it
may not operate normally.
Getting Started
Remote
control
• • • • • • a • • • • • •
D.SKIP : Chooses a desired disc.
FUNCTION : Selects the
function and input source.
MUTE : Mutes the sound.
OPEN/CLOSE (B) : Opens and
closes the disc tray.
TITLE : If the current DVD
title has a menu, the title
menu appears on the screen.
Otherwise, the disc menu may
appear.
DISPLAY : Accesses On-Screen
Display.
MENU : Accesses the menu on a
DVD disc.
SETUP : Accesses or removes
setup menu.
• • • • • • b • • • • • •
PRESET (W/S) : Selects
programme of Radio.
TUN. -/+(A/D) : Tunes in the
desired radio station.
W/S/A/D (up/ down/ left/
right) : Used to navigate onscreen displays.
ENTER (b) : Acknowledges
menu selection.
RETURN (x) : Moving back
wards in the menu.
REC (X) : Recording.
• • • • • • c • • • • • •
STOP (Z) : Stops playback or
recording.
PLAY (d), MO./ST. : Starts
playback.
Selects Mono/ Stereo.
Remove the battery cover on
the rear of the Remote Control,
and insert one (size AAA)
battery with 4 and 5 matched
correctly.
PAUSE/STEP (M) : Pauses
playback.
SKIP (C/V) : Goes to next
or previous chapter/ track/ file.
SCAN (c/v) : Searches
backward or forward.
VOL (+/-) (Volume) : Volume
control.
EQ ($) : You can choose sound
impressions.
LG EQ (9) : Select a Natural or
Local Specialization equalizer
effect by LG EQ.
• • • • • • d • • • • • •
0 to 9 numerical buttons :
Selects numbered options in a
menu.
REPEAT/RANDOM : Selects a
play mode.
SUBTITLE (]) : During
playback, press SUBTITLE (])
repeatedly to select a desired
subtitle language.
TV Control buttons : Controls
the TV. (LG TV only)
Controlling the TV.
You can control the sound
level, input source, and power
switching of LG TVs as well.
Hold POWER (TV) and press
PR/CH (+/–) button repeatedly
until the TV turns on or off.
PROG./MEMO. : Accesses
Program menu.
CLEAR : Removes a track
number on the Program List.
MIC VOL (+/ - ) : Adjusts
microphone volume.
ECHO VOL (+/ - ) : Adjusts echo
volume.
VOCAL FADER : You can enjoy
the function as karaoke, by
reducing singer vocal of music
in the various source.
1
Getting Started
SLEEP : Sets the system to turn
off automatically at a specified
time.
POWER (1) : Switches the unit
ON or OFF.
Battery Installation
9
10
Getting Started
Front panel
1
Getting Started
Getting Started
a Disc tray
k B OPEN/CLOSE
b 1/! STANDBY/ON
l DISC SKIP
Choose a desired disc.
c Display window
d CLOCK
For setting the clock and checking the time.
f USER EQ
gSelects DVD/CD function.
Selects TUNER function.
Selects USB function.
Selects AUX function.
h SET
Confirms the settings. (TIMER/ CLOCK)
CD M
Pauses.
PRESET (-)
TUNING (-)
DEMO In power off state to demonstrate the
function on display window. To cancel it, press
1/! or this button again.
i Headphone jack
j USB connector
m EQ
You can choose fixed sound impression.
n BASS BLAST
Extreme Dynamic Sound System.
Reinforce the treble, bass and surround effect.
MP3 OPT.
Optimizes compressible MP3 files so that it
improves the bass sound.
o REC.
pLG EQ
You can choose fixed sound impression.
qD
PRESET (+)
TUNING(+)
I(STOP)
rMIC VOL.
Adjust microphone volume.
sMIC 1, 2
tVolume control
1
Getting Started
e TIMER
With the TIMER function you can turn USB, CD
play and TUNER reception on or off at a desired
time.
11
12
Getting Started
Rear panel
1
Getting Started
a AUX IN connector
b VIDEO OUT connector
c ANTENNA (FM, AM)
d COMPONENT VIDEO OUT (PROGRESSIVE SCAN) connector
e POWER IN
f SPEAKERS terminals
g Cooling Fan (Except DM5230)
Connecting
Connecting to
speakers
13
Antenna Connection
Connect the supplied FM/ AM antenna for listening
to the radio.
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
2
Connecting
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
>>Caution
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
, Note
y To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
y Be sure to fully extend the FM wire antenna.
14
Connecting
Connections to Your
TV
Video Connection
Connect the VIDEO OUT jack on the unit to the
video in jack on the TV using a video cable.
Make one of the following connections, depending
on the capabilities of your existing equipment.
,,Note
2
Connecting
yy Depending on your TV and other equipment
you wish to connect, there are various ways
you could connect the unit. Use only one of
the connections described in this manual.
yy Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
yy Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel.
yy Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.
Yellow
TV
Connecting
Component Video Connection
Connect the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks on the unit to the
corresponding input jacks on the TV using
component cables.
You can hear the sound through the system’s
speakers.
15
Optional Equipment
Connection
AUX In Connection
Connect an Output of auxiliary device to the AUX
(L/R) IN Connector.
2
Connecting
Red
White
To the audio output jacks
of your component
(TV, VCR, etc.)
TV
,,Note
If your TV has only one output for audio
(mono), connect it to the left (white) audio jack
on the unit.
Green
Blue
Red
,,Note
If your TV accepts progressive format signals,
you must use this connection and set
[Progressive Scan] in [Display] setup to [On]
(See page 18).
16
Connecting
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
2
Connecting
,,Note
Removing the USB Device from the unit
1. Choose a different function/mode or
press STOP (Z) twice in a row.
2. Remove the USB device from the unit.
3
System setting
System setting
Adjust the Setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item.
OSD Initial language settings
- Optional
17
To display and exit the Setup
Menu
1. Select the DVD/CD or USB function by pressing
FUNCTION.
2.Press SETUP.
Displays the [SETUP] Menu.
3.Press SETUP or RETURN (x) to exit in the
[SETUP] Menu.
About help menu for Setup
Buttons
When using this unit for the first time, the initial
language setup menu appears on your TV screen.
You must complete initial language selection
before using the unit. English will be selected as the
initial language.
w/s
Move
W/S
Moving to another
menu.
a
Prev.
A
Moving to previous
level.
1.Press POWER (1) to turn the unit on.
The language setup menu will appear on the
screen.
d
Select
D
Moving to next level
or selecting menu.
2.Use W/S/A/D to select a language then
press ENTER (b).
The confirm menu will appear.
Close
x
RETURN
To exit the [Setup]
menu.
ENTER
To confirm menu.
3.Use A/D to select [Enter] then press
ENTER (b) to finish the language setup.
b
Enter
Operation
3
System setting
Menu
18
System setting
LANGUAGE
DISPLAY
OSD
TV Aspect
Select a language for the Setup menu and then on
screen display.
Select which screen aspect to use based on the
shape of your TV screen.
Disc Audio/Disc Subtitle/Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Refers to the original language in which the disc
was recorded.
Display Mode
3
[Other]
System setting
To select another language, press numeric
buttons and then ENTER (b)to enter the
corresponding 4-digit number according to the
language code list on the page 34. If you enter the
wrong language code, press CLEAR.
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Off (for Disc Subtitle)]
Turn off Subtitle.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This fills the entire 4:3 screen, cropping the
picture as necessary.
Progressive Scan
(For Component Video connections)
Selects whether the COMPONENT
VIDEO(PROGRESSIVE SCAN) OUT jacks output
progressive signal. If your TV accepts progressive
format signals, you will enjoy accurate color
reproduction and high quality image by selecting
[On]. If your TV does not accept progressive format
signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc from the
unit. Next, press and hold STOP (Z) for about five
seconds. The video output will be restored to the
standard setting, and a picture will be visible on
your TV.
System setting
19
AUDIO
LOCK (Parental Control)
DRC (Dynamic Range Control)
Initial Setting of the Area Code
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
When you use this unit for the first time, you have
to set the Area Code as shown below.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
1. Select the [Lock] menu and then press D.
2.Press D.
To access the [Lock] options, you must input the
password you have created. Input a password
and press ENTER (b). Enter it again and press
ENTER (b) to verify. If you make a mistake
before pressing ENTER (b), press CLEAR.
3. Select the first character using W/S buttons.
4.Press D and select the second character using
W/S buttons.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
D.
2. Input a password and press ENTER (b).
3. Select a rating from 1 to 8 using the W/S
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4.Press ENTER (b) to confirm your rating
selection.
System setting
5.Press ENTER (b) to confirm your Area code
selection.
3
20 System setting
Password
OTHERS
You can enter or change password.
DivX(R) Registration
1.Select [Password] on the [Lock] menu and then
press D.
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX,Inc. This is an official DivX Certified
device that plays DivX video. Visit www.divx.com
for more information and software tools to convert
your files into DivX video.
2. Input a password and press ENTER (b).
To change the password, press ENTER (b)
when the [Change] option is highlighted. Input
a password and press ENTER (b). Enter it again
and press ENTER (b) to verify.
3.Press SETUP to exit the menu.
,,Note
If you forget your password, you can clear it
using the following steps:
3
1.Press SETUP to display the Setup menu.
System setting
2.Input the 6-digit number “210499” and press
ENTER (b). The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 35.
1. Select [Area Code] on the [Lock] menu then
press D.
2. Input a password and press ENTER (b).
3. Select the first character using W/S buttons.
4.Press D and select the second character using
W/S buttons.
5.Press ENTER (b) to confirm your Area code
selection.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content. To generate
the registration code, locate the DivX VOD section
in the device setup menu. Go to vod.divx.com with
this code to complete the registration process and
learn more about DivX VOD.
,,Note
All the downloaded videos from DivX VOD can
only be played back on this unit.
Operating
Basic Operations
Disc/USB Operations
1. Insert the disc by opening the Disc tray or
connect the USB device to the USB port.
2. Select the DVD/CD or USB function by pressing
FUNCTION.
To
Press Z.
Playback
Press d.
,,Note
yy For the most Audio CD and DVD-ROM discs,
playback starts automatically.
Skipping to the
next/ previous
chapter/ track/
file
Locating a
point quickly by
playing a file in
fast forward or
fast reverse
yy The DTS is not supported. In case of DTS
audio format, audio is not output.
During playback, press C or
V to go to the next chapter
track/file or to return to the
beginning of the current
chapter track/ file.
Press C twice briefly to step
back to the previous chapter
track/ file.
During playback, press c or
v repeatedly to select the
required scan speed.
To return to normal speed,
press d.
Playing
repeatedly or
randomly
Press REPEAT/RANDOM
repeatedly, and the current
title, chapter or track will be
played back repeatedly or
randomly.
- Random play mode : only
music files.
Slowing down
the playing
speed
In the pause mode, press c
or v to select the required
speed. (DVD only)
4
Operating
yy The unit plays only music file contained in
the USB storage device or disc automatically.
(except for folder )
During playback, press M.
Press M repeatedly to play title
Frame-by-Frame
Frame-by-Frame.
playback
(DVD, DivX only)
3. Select a file (or track/ title) you want to play by
pressing W/S/A/D.
yy When playing a disc or USB Flash Drive
containing with DivX, MP3/ WMA and JPEG
files together, you can select menu of files
which you would like to play by pressing
MENU.
Do this
Stop
Pause
21
22 Operating
Other Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1.Press DISPLAY to show various playback
information.
The displayed items differ depending on the
disc type or playing status.
2. You can select an item by pressing W/S and
change or select the setting by pressing A/D.
4
To display the DVD Menu
r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1.Press MENU.
The disc’s menu appears.
2. Select the menu by using W/S/A/D.
3.Press ENTER (b) to confirm.
To display the DVD title
r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1.Press TITLE.
The disc’s title appears.
Operating
Title
-- Current title number/ total number
of titles.
Chapter
-- Current chapter number/total
number of chapters.
Time
-- Elapsed playing time.
Audio
-- Selected audio language or
channel.
Subtitle
-- Selected subtitle.
During playback, press SUBTITLE (]) repeatedly
to select a desired subtitle language.
Angle
-- Selected angle/ total number of
angles.
1.5 times speed playback
Sound
-- Selected sound mode
r
,,Note
If any button is not pressed for a few seconds,
the onscreen display disappears.
2. Select the menu by pressing W/S/A/D.
3.Press ENTER (b) to confirm.
Selecting a subtitle language
yr
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press PLAY (d) to play at 1.5
times speed. “dX1.5” appears on the screen.
2.Press PLAY (d) again to exit.
Operating 23
Starting play from selected
time
Creating your own program
yr
You can play the contents of a disc in the order
you want by arranging the order of the songs on
the disc. The program is cleared when the disc is
removed.
To start playing at any chosen time on the file or
title.
1.Press DISPLAY during playback.
2.Press W/S to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4.Press ENTER (b) to confirm. Playback starts
from the selected time.
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Changing the character set to
display DivX® subtitle correctly
- optional
y
If the subtitle does not display properly during
playback press and hold SUBTITLE (]) for
about 3 seconds then press SUBTITLE (]) to
select another language code until the subtitle is
displayed properly and then press ENTER (b).
1. Select a desired music file then press
PROG./MEMO. or select “#” and then press
ENTER (b) to add the music file to the program
list.
2. To add all music file on the disc, select “^“
and then press ENTER (b).
3. Select a music file from the program list
then press ENTER (b) to start programmed
playback.
4. To clear a music file from the program list, select
the music you want to clear then press CLEAR
or select “-“ icon and then press
ENTER (b). To clear all music file from the
program list, select “=“ then press
ENTER (b).
Viewing a PHOTO file
i
This unit can play discs with photo files.
1. Select the DVD/CD or USB function by pressing
FUNCTION.
2.Press W/S to select a folder, and then press
ENTER (b).
A list of files in the folder appears.
If you are in a file list and want to return to the
previous folder list, use the W/S buttons on
the remote to highlight g... and press
ENTER (b).
3. If you want to view a particular file, press
W/S to highlight a file and press ENTER (b)
or PLAY (d). While viewing a file, you can press
STOP (Z) to move to the previous menu (JPEG
menu)
4
Operating
Last Scene Memory
u
24 Operating
Viewing a PHOTO file as a
slide show
Using your player as an alarm
clock
i
1. Turn the power on.
1. Highlight the file (not folder) which you like
beginning slide show.
2.Press TIMER. Each functions flashes.
2.Use W/S/A/D to highlight the Speed.
Then, use A/D to select the (3s/ 5s/ 8s) option
you want to use and then press ENTER (b).
3.Use W/S/A/D to highlight the (Slide Show)
then press ENTER (b).
4
Buttons
a/d
Prev./ Next
Operating
x
Close
b
Hide
Operation
W/S
Rotating the
picture.
A/D
Moving to
another file.
RETURN
Returning to the
menu.
ENTER
Hiding the help
menu.
Setting the Clock
1. Turn the power on.
2.Press CLOCK for at least 2 seconds.
3. Choose from either, by using
C or V.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET/CD M for confirm your selection.
5. Select the hours. by using
C or V.
6.Press SET/CD M.
7. Select the minutes, by using
C or V.
8.Press SET/CD M.
4. “ON TIME” will be displayed. This is where you
set the time you want the alarm to start. Use the
C or V to change the hours and minutes
and SET/CD M to save.
5. The “OFF TIME” will be displayed. This is where
you set the time you want the function to stop.
About help menu for slide show.
Menu
3.Press SET/CD M when the function you want to
be woken by is showing.
6. Use the C or V to change the hours and
minutes and press SET/CD M to save.
7. You will be shown the volume (VOL) you want
to be woken by. Use the C or V to change
the volume and SET/CD M to save. The clock
icon “(” shows that the alarm is set.
8.Press TIMER button 2 times. You can check the
setting status.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
information by pressing TIMER even when
the unit is turned off. Then this function will
working in everyday.
Operating 25
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after which the unit
turn off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
yy You can check the remaining time before
the Unit turns off.
yy Press SLEEP. The remaining time appears in
the display window.
yy Sleep function will working after dimmer.
Dimmer
Press SLEEP once. The display window will be
darkening by half. To cancel it, press SLEEP
repeatedly until dim off.
Press DEMO once. In power off state to
demonstrate the function on display window.
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, appears the “q” in the
display window.
Screen Saver
The screen saver appears when you leave the unit
in Stop mode for about five minutes.
System Select - Optional
You must select the appropriate system mode for
your TV system. If “NO DISC” appears in the display
window, press and hold PAUSE/STEP (M) for more
than five seconds to be able to select a system.
(AUTO/PAL/NTSC)
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing DISPLAY.
4
Operating
DEMO
Turning off the sound
temporarily
26 Operating
Using Microphone
1. Connect your microphone to the MIC 1, 2.
2. Play the music you want.
3.Sing along with the accompaniment. Adjust the
microphone volume by pressing MIC VOL..
,,Note
hen not using the microphone, set the
yy W
MIC VOL. to minimum or turn off the MIC
and remove the microphone from the MIC
1, 2.
yy If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL..
yy If sound through the micrphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOL. to minimum.
4
Operating
VOCAL FADER
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.)
Press the VOCAL FADER, and “FADE ON” will appear
in display window.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music
files.
,,Note
yy This function is available to use only when a
microphone is connected.
yy It is not available on the MONO source.
Operating 27
Radio Operations
Presetting the Radio Stations
Be sure that both FM and AM aerials are connected.
(Refer to the page 13)
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume.
Listening to the radio
1.Press FUNCTION on the remote control or
TUNER on the unit until FM or AM appears in
the display window.
1.Press FUNCTION on the remote control or
TUNER on the unit until FM or AM appears in
the display window. The last received station is
tuned in.
2. Press and hold TUNING (-/+) on the unit or
TUN.(-/+) on the remote control for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING (-/+) on the unit or
TUN.(-/+) on the remote control repeatedly.
3.Press PROG./MEMO. preset number will flash in
the display window.
4.Press PRESET (W/S) to select the preset
number you want.
5.Press PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET (W/S).
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“ERASE ALL” will flash up on the unit display.
2.Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
Press PLAY (d), MO./ST. on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
4
Operating
3. Adjust the volume by rotating Volume knob on
the front panel or by pressing VOL (-/+) on the
remote control repeatedly.
2. Select the desired frequency by using TUNING
(-/+) on the unit or pressing TUN.(-/+) on the
remote control.
28 Operating
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using LG EQ/EQ
You can change the LG EQ/EQ using A/D arrow
key while the sound effect information is displayed
on.
The displayed items for the equalizer maybe
different depending on sound sources and effects.
On Display
NATURAL
4
Local
Specialization
equalizer
Operating
AUTO EQ
POP
CLASSIC
JAZZ
ROCK
Description
You can enjoy comfortable
and natural sound.
Regionally optimized sound
effect. (DANGDUT/ ARABIC/
PERSIAN/ INDIA/REGUETON/
MERENGUE/ SAMBA/ SALSA)
Sets the sound equalizer on
the mode that is the most
similar to the genre which is
included in the MP3 ID3 tag of
song files.
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
rock pop, jazz or classic
concert.
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
Reinforce the treble, bass and
surround sound effect.
BYPASS
You can enjoy the sound
without equalizer effect.
,,Note
You may need to reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
Setting the USER EQ
You can listen to music with the desired sound
effect by adjusting the BASS, MIDDLE and TREBLE.
1.Press USER EQ.
“USER EQ” is displayed.
2.Press SET/CD M to enter the USER EQ.
3. Select the BASS, MIDDLE or TREBLE sound effect
you want by using PRESET (-/+) on the unit.
4.Press TUNING (-/+) on the unit to select the
sound level you want.
5. To finish the setting, press SET/CD M.
Operating 29
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from many
types of external device. (Refer to the page 15)
1. Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1 (Power).
3. Select the AUX function by pressing AUX on the
unit or FUNCTION on the remote control.
4. Turn the external device and start it playing.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
3.Press REC on the unit or XREC on the remote
control.
ne track/ file recording - You can record to
O
USB after playing the file you want.
All tracks/ files recording - Record to USB in
stop.
Program list recording - After marking desired
file(s) and you can record it to USB. (AUDIO CD
Only)
4. To stop recording, press STOP on the unit or Z
on the remote control.
yy During recording MP3/ WMA, there is no
sound.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (AUDIO CD Only)
yy Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL” or “NO REC”
is displayed on the display window.
yy Multi card reader device or External HDD
can not be used for USB recording.
yy A file is recorded by 2 hours (about 128
Mbytes) when you record for a long term.
yy In the state CD-G disc, USB record is not
operated.
yy You may not record more than 999 files.
yy The file number is saved automatically.
yy It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
* : TUNER, AUX and the like.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
4
Operating
2. Select a function in which you want to record
Playback a sound source first.
,,Note
yy You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
30 Troubleshooting
Troubleshooting
Problem
No Power.
No picture.
Cause & Correction
yy The power cord is not plugged in. Plug in the power cord.
yy The TV is not set to receive the DVD signal. Select the appropriate video input
mode on the TV so the picture from the unit appears on the TV screen.
yy The video cables are not connected securely. Connect the video cables
securely to both the TV and unit.
yy Equipment connected via the audio cable is not set to receive DVD signal
output. Select the correct input mode of the unit so you can hear the sound
from the unit.
There is little or no
sound.
yy The speaker cables are not connected to the speakers or unit securely.
Connect the speaker cables into the connection terminals correctly.
yy The volume is set to minimum. Use the volume controller to adjust the
volume.
yy An unplayable disc is inserted. Insert a playable disc.(check the disc type,
colour system and regional code)
yy No disc is inserted. Insert a disc.
A DVD/CD will not play.
5
yy The disc is inserted upside down. Place the disc with the label or printed side
facing upwards.
Troubleshooting
yy There is a parental lock which prevents the playback of DVDs with a certain
rating. Enter your password or change the rating level.
Humming noise heard
while a DVD or CD is
playing.
yy The disc is dirty. Clean the disc using a soft cloth with outward strokes.
yy The unit is located too close to the TV, causing feedback. Move unit and audio
components further away from your TV.
yy The antenna is positioned poorly. Adjust its position.
yy The signal strength of the radio station is too weak. Tune to the station
manually.
Radio stations cannot be
tuned in properly.
yy No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels). Preset some radio stations, see page 27 for
details.
yy The remote control is not pointed at the remote sensor of the unit. Point the
remote control at the remote sensor of the unit.
yy The remote control is too far from the unit. Operate the remote control within
about 23 ft (7 m).
The remote control does
yy There is an obstacle in the path of the remote control and the unit. Remove
not work properly.
the obstacle.
yy The battery in the remote control is exhausted. Replace the battery with new
one.
Appendix
31
Specifications
General
Power supply
Refer to main label.
Power consumption
Refer to main label.
Net Weight
5.2 kg
External dimensions (W x H x D)
DM5430
DM5330
DM5230
275 x 342 x 365 mm
275 x 334 x 365 mm
275 x 334 x 365 mm
5 °C to 35 °C (41 °F to 95 °F)
Operating conditions Temperature
Operation status: Horizontal
Operating humidity
5 % to 85 %
Inputs/ Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p),
75 Ω, RCA jack x 2
AUX. IN
2.0 V (RCA jack x 2)
System
Signal system
Standard NTSC/ PAL color TV system
Frequency response
40 Hz to 20 kHz
Signal-to-noise ratio
More than 75 dB
Dynamic range
More than 80 dB
Bus Power Supply (USB)
DC 5 V 0 500 mA
6
Stereo mode
DM5430
DM5330
DM5230
130 W + 130 W (4 Ω)
50 W + 50 W (4 Ω)
30 W + 30 W (4 Ω)
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range
522 to 1 620 kHz or 520 to 1 710 kHz
Appendix
Amplifier
32 Appendix
Front Speakers
Models
DMS5430V
DMS5330V
DMS5230V
Type
2 Way 2 Speaker
2 Way 2 Speaker
2 Way 2 Speaker
Impedance
4Ω
4Ω
4Ω
Rated Input Power
130 W
50 W
30 W
Max. Input Power
260 W
100 W
60 W
Net Dimensions (WxHxD)
232 x 263 x 345 mm
219 x 335 x 330 mm
219 x 335 x 330 mm
Net Weight (1EA)
3.9 kg
3.5 kg
3.5 kg
yy Design and specifications are subject to change without notice.
6
Appendix
Appendix 33
Maintenance
Handling the Unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Trademarks and
Licenses
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
DivX®, DivX Certified® and associated logos are
trademarks of DivX, Inc. and are used under
license.”
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
34 Appendix
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc
Menu.
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
6
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Appendix
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
Appendix 35
Area Codes
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
LY Russian
LU Federation Vietnam RU Zimbabwe SA
SN
TH
VN
ZW
6
Appendix
Download PDF