LG | DM7630 | LG DM7630 Owner’s Manual

ENGLISH
OWNER’S MANUAL
Mini Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
DM7630 (DM7630, NS7630V/S/C/W)
DM7630-AU_DKENHLK_ENG.indd 1
2013-07-09
5:48:22
1
2
Getting Started
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
DM7630-AU_DKENHLK_ENG.indd 2
2013-07-09
5:48:23
Getting Started
3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
1
Getting Started
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
DM7630-AU_DKENHLK_ENG.indd 3
2013-07-09
5:48:23
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
6Introduction
8
– Playable file Requirement
9
– Compatible USB Devices
9
– USB device requirement
10 Front panel
12 Rear panel
13 Remote control
DM7630-AU_DKENHLK_ENG.indd 4
2Connecting
14
15
16
16
17
18
18
18
19
19
Attaching the speakers to the unit
Positioning the system
Connections to Your TV
Component Video Connection
– Video Connection
Optional Equipment Connection
– AUX In Connection
– AUDIO (PORT. IN) In Connection
– USB Connection
Antenna Connection
3 System setting
20 Adjust the setup settings
20 – OSD Initial language settings Optional
20 – To display and exit the Setup menu
21 – Language
21 – Display
22 – Audio
23 – Lock (Parental Control)
24 – Others
2013-07-09
5:48:23
Table of Contents
4Operating
5Troubleshooting
25
25
25
26
26
27
27
27
28
29
29
30
30
30
32
32
32
32
32
32
33
33
34
34
35
35
35
35
37Troubleshooting
Using the Home Menu
Basic Operations
– CD / USB
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– Starting play from selected time
– Marked Playback
– AUTO DJ playback
– Viewing a PHOTO file
– Sleep Timer Setting
– Dimmer
– Turn off the sound temporarily
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Deleting a saved station
– Improving poor FM reception
– Setting the Clock
– Using your player as an alarm clock
Sound adjustment
– Setting the surround mode
– Adjust the speaker level settings
– Setting the USER EQ
Advanced Operations
– Listening to music from your external
device
36 – Recording to USB
DM7630-AU_DKENHLK_ENG.indd 5
5
1
6Appendix
38Maintenance
38 – Handling the Unit
38 – Notes on Discs
39 Area Codes
40 Language Codes
41 Trademarks and Licenses
42Specifications
2
3
4
5
6
2013-07-09
5:48:23
6
1
Getting Started
Getting Started
Unique Features
Introduction
Portable In
Playable Discs
Listen to music from your portable device. (MP3,
Notebook, etc)
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG files. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
USB Direct Recording
Records music from CD to your USB device.
DVD-VIDEO (8 cm/12 cm disc)
Accessories
Discs such as movies that can be
purchased or rented.
Please check and identify the supplied accessories.
DVD±R (8 cm/12 cm disc)
Video mode and finalized only.
DVD-RW (8 cm/12 cm disc)
Video mode and finalized only.
DVD+R: Video mode only
Video cable (1)
FM antenna (1)
Supports the double layer disc also.
DVD+RW (8 cm/12 cm disc)
Video mode and finalized only.
Remote control (1)
Batteries (1)
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
AM antenna (1)
DM7630-AU_DKENHLK_ENG.indd 6
2013-07-09
5:48:25
Getting Started
Symbols Used in this Manual
DVD and finalized DVD±R/RW
ACD
Audio CDs
WMA
WMA files
MP3
MP3 files
MOVIE
Video files contained in the
USB/Disc
PHOTO
Photo files
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
1
Getting Started
DVD
7
,,Note
Indicates special notes and operating features.
,,Tip
Indicates tip and hints for making the task easier.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
DM7630-AU_DKENHLK_ENG.indd 7
2013-07-09
5:48:26
8
1
Getting Started
Playable file Requirement
DivX file requirement
MP3/WMA music file requirement
DivX file compatibility with this unit is limited as
follows :
Getting Started
MP3/ WMA file compatibility with this unit is limited
as follows :
•• Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48
kHz (WMA)
•• Bit rate : 32 - 320 kbps (MP3), 40 - 192 kbps
(WMA)
•• Maximum files : Under 999
•• File extensions : “.mp3”/ “.wma”
•• CD-ROM file format : ISO9660/ JOLIET
•• We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
Photo file requirement
Photo file compatibility with this unit is limited as
follows :
• Max pixel in width : 2760 x 2048 pixel
• Maximum files : Under 999
• Some discs may not operate due to a
different recording format or the condition
of disc.
• File extensions: “.jpg”
• CD-ROM file format : ISO9660/ JOLIET
•• Available resolution:
up to 800 x 600 (W x H) pixels.
•• The file name of the DivX subtitle should be
entered 45 characters or less.
•• If there is a code impossible to express in the
DivX file, it may be displayed as a “ _ “ mark on the
display.
•• Frame rate : less than 30 fps.
•• If the video and audio structure of recorded
files are not interleaved, either video or audio is
output.
•• Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
•• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI
(*.smi), SubStation Alpha (*.ssa/ *.txt), MicroDVD
(*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt), Vobsub
(*.sub)
yy Playable Codec format : “DIVX3.xx”, “DIVX4.xx”,
“DIVX5.xx”, “MP4V3”, “3IVX”.
yy Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
•• Sampling frequency : between 32 to 48 kHz
(MP3), between 32 to 48 kHz (WMA)
•• Bit rate : between 32 to 320 kbps (MP3), 40 to 192
kbps (WMA)
•• For Discs formatted in Live file system, you can
not use it on this unit.
•• If the name of movie file is different from that of
the subtitle file, during playback of a DivX file,
subtitle may not be display.
•• If you play a DivX file differ from DivX spec, it may
not operate normally.
DM7630-AU_DKENHLK_ENG.indd 8
2013-07-09
5:48:26
Getting Started
9
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :Devices that support USB2.0 or
USB1.1.
1
Getting Started
yy The USB function of this unit does not support
some USB devices.
USB device requirement
•• Devices which require additional program
installation when you have connected it to a
computer, are not supported.
•• Do not extract the USB device while in operation.
•• For a large capacity USB, it may take longer than
a few minute to be searched.
•• To prevent data loss, back up all data.
•• If you use a USB extension cable or USB hub, the
USB device is not recognized.
•• Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
•• This unit is not supported when the total
number of files is 1000 or more.
•• External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
•• USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
DM7630-AU_DKENHLK_ENG.indd 9
2013-07-09
5:48:26
10
Getting Started
Front panel
1
Getting Started
a
b
k
c
d
e
j
f
i
h
g
DM7630-AU_DKENHLK_ENG.indd 10
2013-07-09
5:48:26
Getting Started
a Disc tray
b 1/!(POWER)
c Display window
dSET M
- Pauses or confirms the setting.
PRESET(-) a
- Selects preset numbers.
PRESET(+) d
- Selects preset numbers.
- Selects disc in the [MUSIC],[MOVIE] menu.
STOP Z
- Stops playback or recording.
e TIMER
- With the TIMER function you can turn CD, USB
play and TUNER reception on or off at a desired
time.
CLOCK
- Sets the clock and checks the time.
USER EQ
- Controls sound register.
LG SOUND EFFECT
- You can select a Natural or Local Specialization
equalizer effect.
BASS BLAST/MP3 Opt.
- Reinforces the treble, bass and surround
effect.
- Optimizes compressible MP3 file to improve
the treble sound.
RADIO
- Selects the RADIO function.
PORTABLE
- Selects the PORTABLE function.
hUSB port
-P
lays or records the audio files by connecting
the USB device.
i MIC 1 / MIC 2
- Connects a microphone to this jack.
jR (Record)
- Starts recording.
DEMO
- Demonstrates each of functions.
SOUND EFFECT
- Selects a sound effect mode.
DISC SKIP
- Choose a desired disc.
OPEN/CLOSE
- Opens and closes the disc tray Disc tray
1
Getting Started
TUNING(-/+) C/V
- Selects the radio station.
- Selects the [MUSIC],[MOVIE],[PHOTO],[SETUP]
menu.
11
kAUTO DJ
- Selects the AUTO DJ mode.
f PORT. IN
PHONES
g HOME
- Displays the [HOME] menu.
AUX
- Selects the AUX function.
ECHO VOL
- Adjusts echo volume.
MASTER VOLUME
- Controls the volume when using any
function.
MULITI JOG DIAL
- Moves to the another file/ track or you can
select the tuning range.
MIC VOL
- Adjusts microphone volume.
DM7630-AU_DKENHLK_ENG.indd 11
2013-07-09
5:48:27
12
Getting Started
Rear panel
1
Getting Started
g
a
b
c d ef
a SPEAKERS terminal
e ANTENNA (FM/AM)
b Cooling fan
f Power cord
c IN PUT (AUX) connector
gVIDEO OUT connector
d OUTPUT (COMPONENT VIDEO)connector
DM7630-AU_DKENHLK_ENG.indd 12
2013-07-09
5:48:27
Getting Started
Remote control
1 POWER: Switches the unit ON
or OFF.
B OPEN/CLOSE: Opens and
closes the disc Drawer.
13
• • • • • • d • • • • • •
AUTO DJ : Selects the AUTO DJ
mode. (For more information refer
to the page 29)
SOUND EFFECT: Selects a sound
effect mode.
m INFO/DISPLAY: Accesses OnScreen Display.
SPEAKER LEVEL: Sets the sound
level of desired speaker.
n HOME: Displays the [Home
Menu].
DISC MENU: Accesses the menu
on a DVD disc.
• • • • • • b • • • • • •
W/S/A/D (up/ down/ left/
right): Used to navigate on-screen
displays.
PRESET +/-: Selects programme
of Radio.
TUNING +/-: Tunes in the desired
radio station.
b ENTER: Acknowledges menu
selection.
Presetting the radio stations.
x RETURN: Moves backwards
in the menu or exits the setup
menu.
VOL -/+ (Volume): Adjusts
speaker volume.
MUTE: Mutes the sound.
• • • • • • e • • • • • •
0-9 numerical buttons: Selects
numbered options in a menu.
MARKER: Marks play list.
h REPEAT: Selects a play
mode. (Repeat/ Random)
• • • • • • f • • • • • •
TV Control buttons: Controls the
TV. (LG TV only)
-- You can control the sound
level, input source, and power
switching of LG TVs as well.
Hold POWER (TV) and press PR/
CH (W/S) button repeatedly
until the TV turns on or off.
X REC: USB Direct Recording.
TITLE: If the current DVD title has
a menu, the title menu appears
on the screen. Otherwise, the disc
menu may not appear.
CLEAR: Removes a number when
setting the password.
• • • • • • c • • • • • •
ECHO VOL -/+ : Adjusts echo
volume.
Z STOP: Stops playback.
d PLAY, MONO/STEREO: Starts
playback. Selects Mono/ Stereo.
Battery Installation
M PAUSE/STEP: Pauses playback.
Remove the battery cover on the
rear of the Remote Control, and
insert one (size AAA) battery with
4 and 5 matched correctly.
c/v SCAN: Searches
backward or forward.
C/V SKIP: Goes to the next
or previous chapter / track / file.
1
Getting Started
SLEEP: Sets the System to turn off
automatically at a specified time.
(Dimmer : The display window will
be darken by half.)
MIC VOL -/+ : Adjusts microphone
volume.
VOCAL FADER : You can enjoy
the function as karaoke, by
reducing singer vocal of music in
the various source.
• • • • • • a • • • • • •
P RADIO&INPUT: Changes
input sources.
D.SKIP : Choose a desired disc.
DM7630-AU_DKENHLK_ENG.indd 13
2013-07-09
5:48:28
14
Connecting
Attaching the speakers
to the unit
2
Connecting
1. To connect the cable to the unit, press each
plastic finger pad o open the connection
terminal. Insert the wire and release the finger
pa. Connect the black stripe of each wire to the
terminals marked -(minus) and the other end to
the terminals marked + (plus).
Color
Speaker
Position
Grey
Rear
Rear right
Blue
Rear
Rear left
Green
Center
Center
Orange
Sub woofer
Any front position
Red
Front
Front right
White
Front
Front left
>>Caution
yy Be careful to make sure children do not put
their hands or any objects into the *speaker
duct.
*Speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure).
Connect the other end of each wire to the
correct speaker according to the color coding:
>>Caution
Do not connect any other speaker except sub
woofer speaker to the sub woofer connection
terminal on the rear of the unit.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
Front Rear Center
DM7630-AU_DKENHLK_ENG.indd 14
2013-07-09
5:48:28
Connecting
Positioning the system
The following illustration shows an example of
positioning the system. Note that the illustrations
in these instructions differ from the actual unit for
explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
B
G
A
A
A
D
Surround left speaker (L)/ Surround right
speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
2
Unit
F
A
Center speaker: Place the center speaker above
or below the monitor or screen.
S ubwoofer: The position of the subwoofer is
not so critical, because low bass sounds are not
highly directional. But it is better to place the
subwoofer near the front speakers. Turn it slightly
toward the center of the room to reduce the wall
reflections.
C
A
Front left speaker (L)/ Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
Connecting
position ( ).
15
E
A
A ABCD E F G
DM7630-AU_DKENHLK_ENG.indd 15
2013-07-09
5:48:31
16
Connecting
Connections to Your
TV
Component Video
Connection
Make one of the following connections, depending
on the capabilities of your existing equipment.
Connect the COMPONENT VIDEO OUTPUT
(PROGRESSIVE SCAN) jacks on the unit to the
corresponding input jacks on the TV by using
component cables.
You can hear the sound through the system’s
speakers.
,,Note
2
Connecting
•• Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the unit.
Use only one of the connections described
in this manual.
•• Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
•• Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel.
•• Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.
: Green
: Blue
: Red
DM7630-AU_DKENHLK_ENG.indd 16
2013-07-09
5:48:31
Connecting
17
Video Connection
Connect the VIDEO OUT jack on the unit to the
video in jack on the TV by using a video cable.
You can hear thr sound through the system’s
speakers.
2
Connecting
: Yellow
DM7630-AU_DKENHLK_ENG.indd 17
2013-07-09
5:48:32
18
Connecting
Optional Equipment
Connection
AUDIO (PORT. IN) In
Connection
Connect an output of portable device (MP3 or PMP
etc) to the AUDIO (PORT. IN) input connector.
AUX In Connection
Connect an Output of auxiliary device to the AUX
(L/R) IN Connector.
2
Connecting
MP3 player, etc...
: Red
: White
To the audio output jacks of
your component (TV, VCR,
etc.)
,,Note
If your TV has only one output for audio
(mono), connect it to the left (white) audio jack
on the unit.
Enjoying audio from an
external source and selecting
the function
You can enjoy audio from an external source
through your unit. And you can select the
function.
Press RADIO&INPUT repeatedly to select the
desired input source or the function. - DVD/CD,
AUX, PORTABLE, FM, AM
DM7630-AU_DKENHLK_ENG.indd 18
2013-07-09
5:48:33
Connecting
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
19
Antenna Connection
Connect the supplied FM/AM antenna for listening
to the radio.
Connect the AM Loop antenna to the AM antenna
connector. (A)
Connect the FM wire antenna to the FM antenna
connector. (F)
Connecting
(F)
2
(A)
,,Note
Removing the USB Device from the unit
1. Choose a different function mode or
press STOP (Z) twice in a row.
2. Remove the USB device from the unit.
,,Note
To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
DM7630-AU_DKENHLK_ENG.indd 19
2013-07-09
5:48:34
20 System setting
Adjust the setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
To display and exit the Setup
menu
1.Press n HOME.
Displays the [Home] Menu.
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item, see pages 20 to 24.
OSD Initial language settings
- Optional
3
System setting
During the first use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using
the unit. English will be selected as the initial
language.
1.Press 1/! (POWER) to turn the unit on. The
language setup menu will appear on the screen.
2. Select an [Setup] by using A/D.
3.Press b ENTER.
Displays the [Setup].
4.Press n HOME or x RETURN to exit in the
[Setup] Menu.
About help menu for Setup
Menu
Buttons
Operation
WS
Moving to another
menu.
a
Move
A
Moving to previous
level.
d
Move
D
Moving to next
level or selecting
menu.
RETURN
To exit the [Setup]
menu or [ 5.1
Speaker Setup].
ENTER
To confirm menu.
ws
Move
x
2.Use W/Sor A/D to select a language then
press b ENTER.
The confirm menu will appear.
Close
b
Select
3.Use A/D to select the [Enter] then press
b ENTER to finish the language setup.
DM7630-AU_DKENHLK_ENG.indd 20
2013-07-09
5:48:35
System setting
Language
Display
Menu Language
TV Aspect
Select a language for the Setup menu and then on
screen display.
Select which screen aspect to use based on the
shape of your TV screen.
Disc Audio / Disc Subtitle / Disc
Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
To select another language, press numeric
buttons and then b ENTER to enter the
corresponding 4-digit number according to
the language code list on the page 40. If you
enter the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turn off Subtitle.
DM7630-AU_DKENHLK_ENG.indd 21
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the
upper and lower portions of the screen.
[Panscan]
3
System setting
[Other]
21
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
2013-07-09
5:48:35
22 System setting
Progressive Scan (For Component
Video connections)
Audio
Selects whether the COMPONENT VIDIO
(PROGRESSIVE SCAN) OUTPUT jacks progressive
signal. If your TV accepts progressive format signals,
you will enjoy accurate color reproduction and high
quality image by selecting [On]. If your TV does not
accept progressive format signals, select [Off ].
5.1 Speaker Setup
If you set Progressive Scan to [On] in error, you must
reset the unit. First, remove the disc in the unit.
Next, press and hold STOP Z for five seconds.
The video output will be restored to the standard
setting, and a picture will be visible on your TV.
Make the following settings for the built-in 5.1
channel surround decoder.
1. Select [5.1 Speaker Setup] on the [Audio] menu.
2.Press b ENTER.
The [5.1 SPEAKER] appears.
3
System setting
3.Use A/D to select the desired speaker.
4. Adjust options using W/S or A/D buttons.
5. Returns to the previous menu by pressing x
RETURN.
[Speaker]
Select a speaker that you want to adjust.
,,Note
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fixed, you cannot
change the settings.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker and
the listening position.
[Speaker Test Start]
Select [Speaker Test Start] by using the W/S
and press b ENTER. Press b ENTER again to
stop. Adjust the volume to match the volume
of test signals memorized in the system.
DM7630-AU_DKENHLK_ENG.indd 22
2013-07-09
5:48:35
System setting 23
DRC (Dynamic Range Control)
Lock (Parental Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Initial Setting the Area Code:
Vocal
When you use this unit for the first time, you have
to set the Area Code.
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
Semi Karaoke
When a chapter/ title/ track is fully finished, this
function shows the score in the screen with a
fanfare sound.
When you finished singing a score will appear
on the screen.
3. Select the first character using WS buttons.
4.Press b ENTER and select the second character
using WS buttons.
5.Press b ENTER to confirm your Area code
selection.
[Off]
Rating
Fanfare and score do not appears on the
screen.
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
,,Note
1. Select [Rating] on the [Lock] menu then press
D.
VD, DVD Karaoke discs with more than
yy D
2 tracks are available discs for the this
function.
hen you watch movies, “off ” the Semi
yy W
Karaoke at the SETUP menu or enjoy it
without connecting the MIC if the fanfare or
score appears during changing a chapter.
yy This function operate on the DVD/CD mode.
yy T he Semi Karaoke function is available only
when a microphone is connected.
3
System setting
[On]
1. Select the [Lock] menu and then press D.
2.Press D.
To access the [Lock] options, you must input the
password you have created. Input a password
and press b ENTER. Enter it again and press b
ENTER to verify. If you make a mistake before
pressing b ENTER, press CLEAR.
2. Input a password and press b ENTER.
3. Select a rating from 1 to 8 using the WS
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not
active and the disc plays in full.
4.Press b ENTER to confirm your rating selection.
DM7630-AU_DKENHLK_ENG.indd 23
2013-07-09
5:48:35
24 System setting
Password
Others
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press D.
2.Press b ENTER.
3. Input a password and press b ENTER.
To change the password, press b ENTER when
the [Change] option is highlighted. Input a
password and press b ENTER. Enter it again
and press b ENTER to verify.
4.Press n HOME to exit the menu.
,,Note
3
If you forget your password, you can clear it
using the following steps:
System setting
1. Select the [Setup] menu on the [Home
Menu].
2. Input the 6-digit number “210499” and
press b ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 39.
1. Select [Area Code] on the [Lock] menu then
press D.
DivX(R) VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
,,Note
All the downloaded videos from DivX® VOD
can only be played back on this unit.
2. Input a password and press b ENTER.
3. Select the first character using WS buttons.
4.Press b ENTER and select the second character
using WS buttons.
5.Press b ENTER to confirm your Area code
selection.
DM7630-AU_DKENHLK_ENG.indd 24
2013-07-09
5:48:35
4Operating
Operating 25
Using the Home Menu
Basic Operations
1.Press n HOME.
Displays the [Home Menu].
CD / USB
1. Insert the disc by pressing OPEN/CLOSE or
connect the USB device to the USB port.
2.Press n HOME.
Displays the [Home] Menu.
2. Select an option by using A/D.
3.Press b ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or displays
the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
3. Select an option by using A/D.
If you select the [Movie], [Photo] or [Music]
option when you connect up to two devices, it
appears as belows.
4.Press b ENTER then selected option menu.
,,Note
yy For the most Audio CD and DVD-ROM discs,
playback starts automatically.
yy The DTS is not supported. In case of DTS
audio format, audio is not output.
DM7630-AU_DKENHLK_ENG.indd 25
2013-07-09
4
Operating
yy The unit plays only music file contained in
the USB storage device or disc automatically.
5:48:36
26 Operating
To
Stop
Do this
Playback
Press d PLAY, MONO/
STEREO.
Pause
Press M PAUSE/STEP.
During playback, press
Frame-byM PAUSE/STEP repeatedly
Frame playback to play title Frame-by-Frame.
(DVD, DivX only)
4
Other Operations
Press Z STOP.
During playback, press or
rotate;
(1) to go to the next track/
file or to return to the
beginning of current track/
file:
Skipping to the - On the remote control :
next/ previous C or V
chapter/ track/ - On the unit: MULITI JOG DIAL
file
or C / V
Operating
(2) to go back to the previous
track/file:
- On the remote control:
C
- On the unit:
MULITI JOGDIAL or C
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1.Press m INFO/DISPLAY to show various
playback information.
The displayed items differ depending on the
disc type or playing status.
2. You can select an item by pressing W/S and
change or select the setting by pressing A/D.
Title – C
urrent title number/ total number of titles.
Chapter – Current chapter number/ total number
of chapters.
Time – Elapsed playing time.
Audio – S elected audio language or channel.
Subtitle – Selected subtitle.
Angle – S elected angle/ total number of angles.
,,Note
If any button is not pressed for a few seconds,
the on-screen display disappears.
During playback, press and
hold c or v on remote
Locating a
control or c or v on the
point quickly by
unit repeatedly to select the
playing a file in
required scan speed.
fast forward or
To return to normal speed,
fast reverse
press d PLAY ,
MONO/STEREO.
Playing
repeatedly or
randomly
Slowing down
the playing
speed
Press h REPEAT repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
- Random play mode : only
music files.
In the pause mode, press
SCAN (c or v) to select
the required speed. (DVD, DivX
only) The DivX file cannot be
slow down reverse playback.
DM7630-AU_DKENHLK_ENG.indd 26
2013-07-09
5:48:36
Operating 27
To display the DVD Menu
DVD
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1.Press DISC MENU.
The disc’s menu appears.
2. Select the menu by using WSAD.
3.Press d PLAY to confirm.
To display the DVD title
DVD
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1.Press TITLE.
The disc’s title appears.
2. Select the menu by pressing WSAD.
3.Press d PLAY, MONO/STEREO to confirm.
Starting play from selected
time
DVD MOVIE
To start playing at any chosen time on the file or
title.
1.Press m INFO/DISPLAY during playback.
2.Press WS to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4.Press b ENTER to confirm. Playback starts from
the selected time.
4
Operating
DM7630-AU_DKENHLK_ENG.indd 27
2013-07-09
5:48:36
28 Operating
Marked Playback
ACD
MP3
WMA
The mark function enables you to store your
favourite files from any disc or USB device in the
unit memory.
1. Select [Music] on the [Home Menu.]
Returning to the upper folder.
(MP3/ WMA only)
File information will be displayed
according to the ID3TAG information
on the appropriate music file. (MP3
only)
To delete a Marker
1.Use W/S to select the track that you wish to
erase from the marked file.
2.Press MARKER.
To delete all Markers
Use W/Sor A/D to select [Deselect All] then
press b ENTER in program edit mode.
,,Note
The markers are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
Changing subtitle code page
MOVIE
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
4
Operating
Selecting all tracks/ files.
Deselecting all tracks/files.
Moving to the previous or
next file list.
2. Select a desired music on the [List] by using the
W/S then press MARKER to appears the mark
on the list.
1. During playback, press INFO/DISPLAY to
display the On-Screen display.
2.Use W/S to select the [Code Page] option.
3.Use A/D to select desired code option.
4.Press RETURN (x) to exit the On-Screen
display.
3.Press b ENTER or d PLAY, MONO/STEREO.
Displays the play mode.
4. Select the play mode by using the W/S and
press b ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback.
,,Note
If you want to select all files on the list, select
[Select All] and press b ENTER.
DM7630-AU_DKENHLK_ENG.indd 28
2013-07-09
5:48:36
Operating 29
AUTO DJ playback
ACD
MP3
Viewing a PHOTO file
PHOTO
WMA
Auto DJ blends the end of one song into the
beginning of another for seamless playback. it
equalizes volume across tracks for uninterrupted
playback.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
order, RANDOM (AUTO DJ RANDOM) -> (AUTO DJ
SEQUENTIAL) -> (AUTO DJ OFF).
Display Window
Description
OFF
(AUTO DJ OFF)
-
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music is
played randomly
on this mode.
(AUTO DJ
SEQUENTIAL)
The music
is played
repeatedly on
this mode.
REPEAT
1. Select [Photo] on the [Home Menu] and press
b ENTER.
Moving to the previous or next file list.
Returning to the upper folder.
2.Press W/S to select a folder, and then press
b ENTER.
3. If you want to view a slide show, press W/S to
highlight a file and press d PLAY.
About help menu in the [Photo] menu
,,Note
Menu
Buttons
yy Searching for a section or playing repeatedly
or randomly is not supported on the AUTO
DJ mode.
d Slide
Show
d
PLAY
yy If you switch to other functions or stop the
music using STOP on the unit (ENTER on
the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
wsad
Move
W/SA/D
Moving to another
file or content.
b
Select
b ENTER
Viewing a particular
file.
x
Close
x RETURN
yy AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
yy All musics are repeated continually until the
user deactivates the AUTO DJ function.
4
Operating
Mode
You can view photo files using this player.
Operation
Viewing a slide
show.
Returning to the
[Home] Menu.
yy During recording AUTO DJ function is not
available.
yy If you change a disc while the AUTO
DJ function is activated the function is
deactivated.
DM7630-AU_DKENHLK_ENG.indd 29
2013-07-09
5:48:37
30 Operating
About help menu in the full screen
Menu
Buttons
Operation
Menu
m
INFO/
DISPLAY
Displaying the Option
menu.
a/d
Prev./ Next
A/D
Moving to another file.
x
CLOSE
x
RETURN
Returning to the
[Photo] menu.
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
m INFO/DISPLAY to display the option menu.
2. Select an option using WSAD.
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
4
Operating
Turn off the sound temporarily
Press
a
b c
de
a Current photo/ Total number of photos –
Use A/D to view previous/next photo.
b Slide Show z/M– Press  ENTER to start
or pause slide show.
c Speed x3/ x2/ x1 – Use  ENTER to select
a delaying speed between photos in a slide
show.
d Rotate – Press  ENTER to rotate the photo.
MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the appears in the display
window.
1.5 times speed playback
DVD
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press PLAY to play at 1.5 times
speed. “dX1.5” appears on the screen.
2.Press PLAY again to exit.
e Go to list – Press  ENTER to return [Photo]
menu.
DM7630-AU_DKENHLK_ENG.indd 30
2013-07-09
5:48:37
Operating
31
Screen Saver
VOCAL FADER
The screen saver appears when you leave the unit
in Stop mode for about five minutes.
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the VOCAL FADER, and
“FADE ON” will appear in display window.
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold M (PAUSE/STEP)
for more than five seconds to be able to select a
system in the [Home] menu.
Last Scene Memory
DVD
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music
files.
This function is available only when MIC is
connected.
,,Note
yy This function is available to use only when a
microphone is connected.
yy It is not available on the MONO source.
DEMO
4
DM7630-AU_DKENHLK_ENG.indd 31
Operating
In the power off state, it demonstrates the function
on display window.
2013-07-09
5:48:37
32 Operating
Radio Operations
Be sure that FM /AM aerials are connected.
(Refer to the page 19.)
Listening to the radio
1.Press P RADIO&INPUT until FM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by pressing VOL (-/+)
repeatedly.
4
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up on the unit display.
2.Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1.Press PRESET - / + to select a preset number
you want to delete.
2.Press CLEAR, the preset number will blink in the
display window.
3.Press CLEAR again, to delete the selectd preset
number.
Improving poor FM reception
Press d PLAY, MONO/STEREO on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Operating
Presetting the Radio Stations
You can preset 50 stations for FM/AM.
Before tuning, make sure that you have turned
down the volume.
1.Press P RADIO&INPUT on the remote control
or RADIO on the unit until FM or AM appears in
the display window.
2. Press or rotate to select a desired frequency;
- On the remote control: TUNING (-/+)
- On the unit: MULITI JOG DIAL or C / V.
3.Press b ENTER. A preset number will flash in
the display window.
4.Press PRESET (-/+) to select the preset number
you want.
5.Press b ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. Press to select a preset station;
- On the remote control: PRESET -/+ or
0 to 9 numerical buttons.
-O
n the remote control: PRESET - / PRESET +
DM7630-AU_DKENHLK_ENG.indd 32
2013-07-09
5:48:37
Operating 33
Setting the Clock
1. Turn the power on.
Using your player as an alarm
clock
2.Press CLOCK for at least 2 seconds
1. Turn the power on.
3. Choose from either, by rotating the MULTI JOG
DIAL knob or pressing C/V.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display).
2.Press TIMER. Each functions flashes.
3.Press SET when the function you want to be
woken by is showing.
6.Press SET.
4. “ON TIME” will be displayed. This is where you
set the time you want the alarm to start. Rotate
the MULTI JOG DIAL knob or press C/V
to change the hours and minutes and SET to
save.
7. Select the minutes, by rotating the MULTI JOG
DIAL knob or pressing C/V.
5. The “OFF TIME” will be displays. This is where you
set the time you want the function to stop.
8.Press SET.
6. Rotate the MULTI JOG DIAL knob or press
C/V to change the hours and minutes
and press SET to save.
4.Press SET for confirm your selection
5. Select the hours, by rotating the MULTI JOG
DIAL knob or pressing C/V.
7. Rotate the MULTI JOG DIAL knob or press
C/V to change the hours and minutes
and press SET to save. The clock icon “(” shows
that the alarm is set.
,,Note
Operating
8.Press TIMER button 2 times. You can check the
setting status.
4
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(” by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(” and setting
information by pressing TIMER even when
the unit is turned off.
DM7630-AU_DKENHLK_ENG.indd 33
2013-07-09
5:48:38
34 Operating
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
You can change the SOUND EFFECT using
A/D arrow key while the sound effect
information is displayed on.
The displayed items for the equalizer may be
different depending on sound sources and effects.
4
Operating
On Display
Description
NAT PLUS
The NAT PLUS is Natural Plus
sound effect. You can enjoy
the natural sound effect same
as a 5.1-channel.
NATURAL
You can enjoy comfortable
and natural sound.
Local
Specialization
equalizer
Regionally optimized sound
effect. (DANGDUT/ ARABIC/
PERSIAN/ INDIA/REGUETON/
MERENGUE/ SAMBA/ SALSA/
CUMBIA/AFRO)
AUTO EQ
Sets the sound equalizer on
the mode that is the most
similar to the genre which is
included in the MP3 ID3 tag of
song files.
POP
CLASSIC
JAZZ
ROCK
Description
PLII MOVIE
PLII MUSIC
Dolby Pro logic II enables you
to play stereo source on
5.1-channel.
BYPASS
You can enjoy the sound
without equalizer effect.
,,Note
•• In some of surround modes, some speakers,
there’s no sound or low sound. Depending
on the mode of surround and the source of
audio, it is not defective.
•• You may need to reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
rock pop, jazz or classic
concert.
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
Reinforces the treble, bass and
surround sound effect.
LOUNDNESS
Improves the bass and treble
sound.
VIRTUAL
On Display
You can enjoy more virtual
surround sound.
DM7630-AU_DKENHLK_ENG.indd 34
2013-07-09
5:48:38
Operating 35
Adjust the speaker level
settings
You can adjust the sound level of each speaker.
1.Press SPEAKER LEVEL repeatedly to selcet a
desired speaker to set.
2.Press VOL -/+ to adjust the sound level of the
selected speaker while the level setting menu is
displayed on the display window.
3. Repeat and adjust the sound level of the other
speakers.
Setting the USER EQ
You can listen to music with the desired sound
effect by adjusting the BASS, MIDDLE and TREBLE.
1.Press USER EQ.
“USER EQ” is displayed.
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from many
types of portable player or external devices.
(Refer to the page 18)
1. Connect the external device to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX
connector of the unit.
2. Turn the power on by pressing 1(POWER) on
the remote control or 1/!(POWER) on the unit.
3. Select the PORTABLE or AUX (L/R) INPUT
function by pressing RADIO&INPUT.
3. Select the BASS, MIDDLE or TREBLE sound effect
you want by using PRESET(-/+)
4. Turn the external device on and start playing it.
4
2013-07-09
5:48:38
Operating
2.Press SET to enter the USER EQ.
4.Press TUNING(-/+) or rotating MULTI JOG DIAL
on the unit to select the sound level you want.
5. To finish the setting, press SET.
DM7630-AU_DKENHLK_ENG.indd 35
36 Operating
Recording to USB
,,Note
1. Connect the USB device to the unit.
•• You can check the recording percentage
rate for the USB record in the display
window during recording. (MP3/ WMA CD/
AUDIO CD Only)
2. Select a mode in which you want to record.
Play back a sound source first.
•• During recording, MP3/ WMA, there is no
sound.
3. Start the recording by pressing X REC.
•• When you stop recording during playback,
the file that has been recorded at that time
will be stored.
You can record music or sound souce to USB device
by connecting in to the port on the unit.
4. To stop recording, press Z STOP.
[All tracks/ files recording]
Record to USB in stop or play mode.
[Program list recording]
After marking desired file(s) and you can record
it to USB (Refer to the page 28).
4
•• Do not remove the USB device or turn off
the unit during USB recording. If not, an
incomplete file may be made and not be
deleted on PC.
•• If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed in the display
window.
•• Multi card reader device or External HDD
can not be used for USB recording.
Operating
•• A file is recorded by 2 hours (about 128
Mbytes) when you record for a long term.
•• You may not record more than 999 files.
•• The file number is saved automatically.
•• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
* : TUNER, AUX and the like.
The making of unauthorized copies of copyprotected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes.
Be responsible
Respect copyrights.
DM7630-AU_DKENHLK_ENG.indd 36
2013-07-09
5:48:39
5Troubleshooting
Troubleshooting 37
Troubleshooting
PROBLEM
No power
No picture
CORRECTION
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
Connect the video cables securely to both the TV and unit.
Select the correct input mode of the unit so you can hear the sound
from the unit.
There is little or no sound
Connect the audio cables into the connection terminals correctly.
Replace with a new audio cable.
The DVD picture quality is poor
Clean the disc using a soft cloth with outward strokes.
Insert a disc.
A DVD/CD will not play
Insert a playable disc (check the disc type, colour system and
regional code).
Place the disc with the label or printed side facing upwards.
Enter your password or change the rating level.
Clean the disc using a soft cloth with outward strokes.
5
Move unit and audio components further away from your TV.
Check the antenna connection and adjust its position.
Radio stations can’t be tuned in
properly
Attach an external aerial if necessary.
Tune to the station manually.
Troubleshooting
Humming noise heard while a DVD
or CD is playing
Preset some radio stations, see page 32 for details.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 23 feet (7m) of the unit.
The remote control doesn’t work
well / at all
There is an obstacle in the path between the remote control and
the unit.
Remove the obstacle.
The battery in the remote control are flat.
Replace the battery with new ones.
DM7630-AU_DKENHLK_ENG.indd 37
2013-07-09
5:48:39
6Appendix
38 Appendix
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
DM7630-AU_DKENHLK_ENG.indd 38
2013-07-09
5:48:39
Appendix 39
Area Codes
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway Canada CA India IN Oman Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg EG Malaysia Vietnam RU Zimbabwe SA
ZW
Egypt LY Russian
LU Federation MY Saudi Arabia El Salvador SV Maldives MV Senegal SN
Ethiopia ET Mexico MX
NO Switzerland CH
OM Taiwan TW
TH
VN
6
Appendix
DM7630-AU_DKENHLK_ENG.indd 39
SI
2013-07-09
5:48:39
40 Appendix
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc
Menu.
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
6
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Appendix
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
6789
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
DM7630-AU_DKENHLK_ENG.indd 40
2013-07-09
5:48:39
Appendix
Trademarks and
Licenses
Dolby, Pro Logic, and the double-D symbol are
registerd trademarkes of Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
41
Notes on Copyrights
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
6
Appendix
DM7630-AU_DKENHLK_ENG.indd 41
2013-07-09
5:48:40
42 Appendix
Specifications
General
Power supply
Refer to main label.
Power consumption
Refer to main label.
Net Weight
5.7 kg
External dimensions (W x H x D)
277 mm x 343.5 mm x 365.5 mm
Operating conditions Temperature
5 °C to 35 °C (41 °F to 95 °F)
Operation status : Horizontal
Operating humidity
5 % to 85 %
Bus Power Supply
USB DC 5 V
500 mA
Inputs/ Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p),
75 Ω, RCA jack x 2
ANALOG AUDIO IN
600 mV (1 kHz), 600 Ω, RCA jack (L, R) x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
Tuner
6
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range
522 to 1620 kHz, 520 to 1710 kHz or 522 to 1710 kHz
Amplifier
Appendix
Front : 156 W x 2 (4 Ω)
Output Power
Center : 75 W x 1 (6 Ω)
Rear : 75 W x 2 (6 Ω)
Woofer : 203 W (3 Ω)
T.H.D
≤ 10 %
Frequency Response
140 Hz to 20 kHz
Signal-to-noise ratio
75 dB
CD
Frequency response (audio)
40 to 20 000 Hz
Signal-to-noise ratio (audio)
More than 75 dB (1 kHz)
Dynamic range (audio)
More than 80 dB
DM7630-AU_DKENHLK_ENG.indd 42
2013-07-09
5:48:40
Appendix 43
Front Speaker
Type
2 Way 2 speaker
Impedance Rated
4Ω
Input Power
156 W
Max. Input Power
312 W
Net Dimensions (W x H x D)
240 mmx 387 mmx 336 mm
Net Weight
5 kg
Rear Speaker
Type
2 Way 2 speaker
Impedance Rated
6Ω
Input Power
75 W
Max. Input Power
150 W
Net Dimensions (W x H x D)
204 mmx 331mm x 255 mm
Net Weight
2.8 kg
Centre Speaker
Type
2 Way 3 speaker
Impedance Rated
6Ω
Input Power
75 W
Max. Input Power
150 W
Net Dimensions (W x H x D)
277 mm x 120 mm x 160 mm
Net Weight
2 kg
6
Passive Subwoofer
1 Way 1 Speaker
Impedance Rated
3Ω
Input Power
203 W
Max. Input Power
406 W
Net Dimensions (W x H x D)
261 mm x 331 mm x 409 mm
Net Weight
6.5 kg
Appendix
Type
Design and specifications are subject to change without notice.
DM7630-AU_DKENHLK_ENG.indd 43
2013-07-09
5:48:40
DM7630-AU_DKENHLK_ENG.indd 44
2013-07-09
5:48:40
Download PDF

advertising