LG | MDD62 | LG MDD62 Owner’s Manual

MDD102_62 A0U_ENG_INTROPA_MFL57236516
Mini Home Theater
OWNER’S MANUAL
MODEL : MDD102
MDD102-A0U/ D0U/ X0U
MDS102V
MDD62
MDD62-A0U/ D0U/ X0U
MDS62V
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of
these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is easily
accessible.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it
from over heating.
The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.
CAUTION:
This Product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Power Save Mode - OPTIONAL
You can set up the unit into an economic power save
mode.
In power-on status, press and hold POWER
( /[) button for about 3 seconds.
- Nothing is displayed in the display window when the
unit is turned off.
To cancel, press POWER (
(DEMO).
2
/[) , CLOCK, TIMER or
Table of Contents
Before Use
Introduction
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2
3
3
4
5
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
Operation
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Operation with Audio CD or MP3/WMA file . . . . . . . . . . . . . 18
Operation with JPEG file . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Operation with DivX file . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operation with RADIO . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
Operation with TAPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications
In addition, this unit can play a DVD±R, DVD±RW, and
CD-R/RW that contains audio titles, MP3, WMA, JPEG
or DivX files.
Note
• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Regional Code
About Symbols
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
About the
Notes on Regional Codes
symbol display
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section of which title has one of the following symbols
is applicable only to the disc represented by the symbol.
DVD DVD
ACD Audio CDs
MP3 MP3 file
WMA WMA file
JPEG JPEG file
DivX DivX file
• Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number
must match your unit’s regional code or the disc cannot play.
• If you try to play a DVD with a different regional code
from your player, the message “Check Regional
Code” appears on the TV screen.
About the symbols for instructions
Caution
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Note
T ip
Indicates special operating features of this unit.
Indicates tips and hints to make the task easier.
3
INTRODUCTION
Playable Discs
Safety Precautions. . . . .
Table of Contents. . . . . .
Before Use . . . . . . . . . .
Front Panel/ Rear Panel.
Remote Control . . . . . . .
Front Panel/ Rear Panel
1
2
8
12
3
4
7
9
5
11
6
10
1.
DISC DOOR
2.
• ( /[)POWER button
• Z OPEN/CLOSE button
DISPLAY WINDOW
• USB
connector
• DEMO button
3.
4.
•
•
•
•
HEADPHONE Jack (PHONES): 3.5 mm
XDSS/MP3 OPT.button
XTS-PRO button
FUNCTION SELECT buttons :
(TUNER,AUX,DVD/ CD,TAPE)
• CLOCK button
• TIMER button
• SET/CD[]/RDS-OPTIONAL
• EQ button
• CD SYNCHRO RECORDING (CD SYNC.)/
DUBBING (DUBB.)/ (ST./MONO) button
• REC/[] button
BB >),
• CD SKIP/SEARCH (. bb/B
BB >)
CD SCAN (. bb/B
REWIND/ FAST FORWARD - TAPE
BB >),TUNING (-/+),
(. bb/B
(b- KEY CON -#) KEY CONTROL buttons
• PRESET (-) button
5.
• PRESET (+)/ FORWARD PLAY (G) button
• STOP (xSTOP) button
• Volume control knob
4
6.
7.
8.
9.
• Z PUSH EJECT position (TAPE 1)
• Z PUSH EJECT position (TAPE 2)
• MIC VOLUME knob (OPTIONAL)
• MIC Jacks (MIC1/ MIC2): 3.5 mm (OPTIONAL)
DISC SELECT buttons (1, 2, 3)
• FM/AM ANTENNA Connector
• AUXILIARY INPUT (AUX IN) connector
WOOFER
PRE-OUT
C
H
A
N
N
E
L
REAR
R (8 )
REAR
L (8 )
CENTER
(8 )
FRONT
R (4 )
FRONT
L (4 )
10. POWER CORD
11. SPEAKER Terminals
12. • COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) (Y PB PR) Connector
• VIDEO OUT Connector
MIC ANT.
AUX IN
Remote Control
D.SKIP
22
1
TUNER/BAND
DVD
AUX
USB
2
SLEEP
21
DIMMER
20
3
4
DISPLAY
PRESET +
5
19
TUN. -
TUN. +
6
7
8
9
POWER button
FUNCTION SELECT buttons
(TUNER/BAND, DVD, AUX, USB)
3. NUMERIC buttons (0-9)
4. TAPE FUNCTION buttons
• PLAY (G)
• REWIND/ FAST FORWARD PLAY (FF/GG)
• TAPE 1-2 SELECT buttons (1-TAPE-2)
• RECORD/ RECORD PAUSE (z/[])
• TAPE STOP (x)
5. SETUP button
6. • ARROW buttons ( /
/ / )
(Selects an option in the menu)
1 - TAPE - 2
SETUP
1.
2.
7.
8.
SELECT
/ENTER
MENU
TITLE
18
STOP
PRESET PAUSE/STEP
AUSE/STEP PLAY
PROG./MEMO.
SCAN
REPEAT
SKIP
17
10
REPEAT A-B MARKER
SEARCH
MUTE
9.
10.
11.
12.
13.
14.
15.
16
EQ
XTS Pro
SOUND
AUDIO
RETURN
ZOOM
S-TITLE
CLEAR
RDS
PTY
XDSS plus
VSM
16.
15
11
17.
18.
14
ECHO VOL.
INTRODUCTION
POWER
MIC VOL.
12
13
Remote Control Operation Range
19.
20.
21.
22.
• PRESET (-/+) buttons ( /
)
• TUN. (-/+) buttons ( / )
SELECT/ENTER button
MENU button
(Use the MENU button to display the menu screen
included on DVD video discs.)
STOP (x), PAUSE([])/ STEP, PLAY (G) buttons
PROG./MEMO., REPEAT, REPEAT A-B buttons
EQ , XTS-Pro, SOUND, SUBTITLE (S - TITLE),
AUDIO,CLEAR buttons
ECHO VOL. ( / ) buttons
MIC VOL. ( / ) buttons
RDS, PTY buttons - OPTIONAL
XDSS plus, VSM (Virtual Sound Matrix), ZOOM,
RETURN (
) buttons
• MARKER, SEARCH, MUTE( ) buttons
• SCAN (FF/GG), SKIP (./>)
VOLUME -/+ buttons
TITLE button
(Use the TITLE button to display the title screen
included on DVD video discs.)
DISPLAY button
DIMMER button
SLEEP button
DISC SKIP (D.SKIP) button
Remote control battery installation
Point the remote control toward the remote sensor and
press the buttons.
• Distance: About 23 ft (7 m) from the front of the
remote sensor
• Angle: About 30° in each direction of the front of the
remote sensor
Detach the battery cover on
the rear of the remote control, and insert two R03 (size
AAA) batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
5
Connections
Connecting to a TV
Progressive Scan connection
Make one of the following connections, depending on
the capabilities of your existing equipment.
• If your television is a high-definition or “digital ready”
television, you may take advantage of this unit’s
progressive scan output for higher video resolution.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the unit.
T ip
• Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described below.
• Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
• Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
• Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y PB PR) jacks from the unit to the corresponding jacks on the TV using an optional Y PB PR
cable (C).
Note
Set the Progressive to “On” in the Setup menu for progressive signal, see the page 13.
Video connection
Connect the VIDEO OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable supplied
(V).
Rear of TV
Component Video connection
VIDEO
IN
Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y PB PR) jacks from the unit to the corresponding jacks on the TV using a Y PB PR cable (C).
Y
V
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
AUX IN
6
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
C
Connections
Connecting to Auxiliary Equipment
Connect the supplied FM/AM antennas to listen to the
radio.
• Connect the AM loop antenna to the AM antenna
connector.
• Connect the FM wire antenna to the FM antenna
connector.
You can use VCR or other unit connected to the AUX
connector.
PREPARATION
Connecting to Antenna
AM(MW) loop
antenna (aerial)
(Supplied)
To AUDIO IN
For AM(MW) reception,
connect the loop antenna
(aerial) to the terminal marked AM
IN
OUT
VIDEO
FM wire
antenna
(supplied)
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
VCR (or Auxiliary
Device, etc)
AUDIO (L)
To AUDIO OUT
AUDIO (R)
AUX IN
a VCR or auxiliary device, etc to the AUX
1 Connect
connector.
the AUX button on the front panel or the
2 Press
remote control until the “AUX” indicator is
displayed in the display window.
Note
• To prevent noise pickup, keep the AM loop antenna
away from the unit and other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
7
Connections
USB Function
Speaker System Connection
You can enjoy the media files such as tunes
(MP3/WMA) saved in an MP3 player or USB memory
by connecting the storage device to the USB port of
this unit.
Connect the speakers using the speaker cables by
matching the colors of the terminals and those of the
cords.
USB Memory,
MP3 Player (or
Memory Card
Reader, etc.)
Compatible Devices
1. Devices which require additional program installation
when you have connected it to a computer, are not
supported.
2. MP3 Player : Flash type MP3 player.
The MP3 player requiring installation of a driver is
not supported.
3. USB Flash Drive : Devices that support USB2.0 or
USB1.1.
To Remove the USB from the unit
1. Choose the other functions except USB
function in order to remove the USB.
2. Remove the USB from the unit.
Note
Besides Basic Playback, if you want to operate other
functions, see the CD Playback section.
Note
• Do not extract the USB device in operating.
• Music files(MP3/WMA), Image Files (JPEG) and
Video Files can be played.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the
USB device might not be recognized.
• A device using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)
• The USB function of this unit does not support all
USB devices.
• Digital camera and mobile phone are not supported.
• This unit is not supported when the total number of
files is 1000 or more.
8
Note
• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –.
If the cables are reversed, the sound will be distorted
and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive
output on the speakers.
• Connect the Front Left/Right speaker correctly. If it is
reversed, the sound may be distorted.
Volume Adjustment
XDSS (Extreme Dynamic Sound System)
• Turn VOLUME knob clockwise to increase the sound
level, or counterclockwise to decrease it.
• Press VOLUME + to increase the sound level, or use
VOLUME - to decrease it on the remote control.
Press XDSS plus to reinforce treble, bass and the surround effect. The “XDSS ON” or “NORMAL” indicator
lights.
MUTE
Press MUTE to turn off the sound, press again to
restore.
“ ” indicator flashes in the display window.
Headphone Jack
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disabled when you plug
in headphones (not supplied).
EQUALIZER Effect
You can choose 8 fixed sound impressions and adjust
the BASS, MIDDLE and TREBLE.
- You can select a desired sound mode by using EQ
button on the front panel or the remote control.
When you want to change a sound mode press the
EQ button repeatedly within 3 seconds.
Each time you press the button the setting changes in
the display window as shown below.
NORMAL → ARABIC → USER EQ → POP →
CLASSIC → ROCK → DRAMA → JAZZ →
NORMAL...
You can set the BASS, MIDDLE and TREBLE on the
USER EQ mode.
1. Select the USER EQ mode by using EQ button.
“USER EQ” will be displayed in the display window.
2. Press the SET/CD[[ button on the front panel when
“USER EQ” is displayed in the display window.
“BASS 0” will be displayed in the display window.
3. Select the BASS, MIDDLE or TREBLE you want by
pressing the PRESET (-/+) buttons on the front
panel.
4. Press the TUNING (-/+) buttons on the front panel
to set the sound level you want. (MIN, -4 ~ +4,
MAX steps)
5. Repeat the 3-4 steps as above.
6. When the sound level is completed, press the the
SET/CD[[ button on the front panel.
DEMO
Press DEMO in power off state to demonstrate the
function in the display window.
To cancel it , press POWER ( / I) or DEMO again.
DVD/DivX/ACD : XDSS ON ↔ NORMAL
MP3/WMA : XDSS ON → MP3 -- OPT ON
→ NORMAL → XDSS ON .
MP3 Optimizer
This function optimizes for compressed MP3 files. It
improves the bass sound to make sweet sound. Each
time you press “ MP3 OPT ”.
The setting changes in the following order.
XDSS ON → MP3 -- OPT ON → NORMAL
XTS pro
This unique sound quality developed by our
technology creates the optimum sound for you to play
the perfect playback of the original sound and to feel
the living sound source.
Each time you press XTS Pro the setting changes in
the following order.
XTS -- P ON ↔ NORMAL
Note
The XTS Pro function will not be operated when a
headphone has been connected.
VIRTUAL sound
Press VSM to set the virtual sound.
Source
2.1 ch.
5.1 ch
Display
VIRTUAL
VIRTUAL
Effect
3D STEREO
Virtual surround
• 3D STEREO
Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers.
Listeners may experience amazing virtual surround
effects with their own multimedia players.
• Virtual surround
A patent pending downmix technology converts 5.1
channel to 2 channel sound having directional
information of audio.
DIMMER
This function dims the LED (Light-emitting diode) of
front panel by half in power-on status.
Press DIMMER once. The LED (Light-emitting diode) of
front panel is turned off and the display window will be
darken by half. To cancel it, press DIMMER again.
9
PREPARATION
Before Operation
Before Operation
Setting the Clock
Press CLOCK.
(If the clock requires setting, press and hold CLOCK
for more than 2 seconds.)
- The hours display begins to blink.
1
Select a 24 hour cycle or 12 hour cycle by
2 pressing . bb/BBB > on the front panel.
or
(12HR)
(24HR)
Press SET/CD[[ to confirm the selected hour
cycle.
3
BB > on the front panel to set
Use . bb/B
4 the correct hours.
Press SET/CD[[.
5
BB > on the front panel to set
. Use . bb/B
6 the correct minutes.
Press SET/CD[[ and the correct time is shown in
7 the display window.
Using Microphone (OPTIONAL)
You can sing to a music source by connecting a
microphone to the unit.
1
Connect your microphone to the MIC1/MIC2
Jack.
“ ” will be shown in the display window.
Play the music you want.
2
Sing along with the accompaniment.
the microphone volume by turning MIC
3 Adjust
volume knob. (MIN,1 - 14, MAX steps)
Note
• When not using the microphone, set the MIC volume
knob to minimum or turn off the MICs and remove the
microphone from the MIC Jack.
• If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
• If sound through the microphone is extremely loud, it
may be distorted. In this case, turn the MIC volume
control toward minimum.
Sleep Timer Function
When the sleep timer is set, the unit automatically turns
off after the specified time has elapsed.
To specify the time delay before the power is
turned off, press SLEEP.
In the display window you can see SLEEP 180 for
about 5 seconds. This means that the system turns
off automatically after 180 minutes.
1
time you press SLEEP the setting changes
2 Each
in the following order.
3
SLEEP 180 →150 → 120 →90→80→70 → 60→ 50 →
40 → 30 → 20 →10 → OFF (No display) →SLEEP 180...
To check the remaining time until the power is
turned off.
While the sleep function is active press SLEEP
briefly. The time remaining until the unit turns off is
displayed for about 5 seconds.
Note
If you press SLEEP while the sleep time is displayed,
the SLEEP time is reset.
To cancel Sleep Timer setting
If you wish to stop the function, press the SLEEP button
repeatedly until “SLEEP 10 ” appears, and then press
SLEEP once again after “SLEEP 10 ” shows on the
display.
10
To Adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Press the ECHO VOL. ( / ) on the remote control to
increase the echo volume or decrease it. (MIN,1 - 14,
MAX steps)
Before Operation
With the TIMER function you can have the radio reception, CD play, USB play and TAPE play turned on and off
at the desired time
1
Press TIMER to enter the timer setting mode.
“TUNERtDVD/CD tUSB tTAPE” flash in the
display window in turn.
For your reference
• If you want to correct the previous memorized TIMER
setting, press and hold the TIMER button more than 2
seconds.
• If you want to check the previous memorized TIMER
setting,press TIMER button briefly.
- The previous memorized timer setting for on Time and
“ ” indicator appears in the display window.
3
4
Set the minute to switch on by pressing
. bb/B
BB > on the front panel.
8
Press SET/CD[[ to confirm the turn on
minutes time.
‘OFF TIME’ indicator appears for about 0.5
seconds in the display window and then
disappears.
9
10
11
12
13
14
Set the hour to switch off by pressing
. bb/B
BB > on the front panel.
15
Turn the system off.
The selected timer functions are automatically
switched on and off at the preset times.
Press CLOCK to check the current time.
For your reference
If you don’t set clock, timer function doesn’t work.
2
7
Press SET/CD[[ when the desired function
flashes.
a. 1. When you select TUNER function,
‘PLAY’ and ‘REC’ indicator flash in
the display window alternately for
about 3 seconds.
‘PLAY’ indicator : TUNER play only
‘REC’ indicator : TUNER play and recording
2.Press SET/CD[[ when the desired
function flashes.
3.Select the previous memorized preset
BB > on the
number by pressing . bb/B
front panel and press SET/CD[[ .
‘ON TIME’ indicator appears for about 0.5
seconds in the display window and then
disappears.
b. When you select DVD/CD, USB or TAPE function,
‘ON TIME’ indicator appears for about 0.5
seconds in the display window and then
disappears.
5
Set the hour to switch on by pressing
. bb/B
BB > on the front panel.
6
Press SET/CD[[.
PREPARATION
Timer Function
Press SET/CD[[.
Set the minute to switch off by pressing
. bb/B
BB > on the front panel.
Press SET/CD[[.
Adjust the volume level by pressing
. bb/B
BB > on the front panel.
Press SET/CD[[.
“ ” appears in the display window and the timer
setting has been completed.
To cancel or check the timer
Each time the TIMER button is pressed you can select
the timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER
button repeatedly so that “ ” appears in the display window.
To cancel the TIMER, press the TIMER button
repeatedly so that “ ” disappears from the display
window.
Note
• If you insert the DVD or DivX except audio
CD/MP3/WMA on the unit, the timer function will be
operated to the TUNER.
• This is not supported in the multi card reader.
11
Before Operation
Displaying Disc Information On-screen
GENERAL OPERATION
You can display various information about the disc
loaded on-screen.
1
Use
/
to select the desired option then
2 press
to move to the second level.
The screen shows the current setting for the select-
1
Press DISPLAY to show various playback information.
The displayed items differ depending on the disc
type or playing status.
You can select an item by pressing
/
and
Press SETUP. The Setup menu appears.
ed item, as well as alternate setting(s).
Use
/
to select the second desired option
3 and then press to move to the third level.
2 •change
or select the setting by pressing / .
Title (Track) – Current title (or track) number/ total
Use
/
to select the desired setting then
number of titles (or tracks).
press SELECT/ENTER to confirm your selection.
4
• Chapter – Current chapter number/ total number of
Some items require additional steps.
chapters.
• Time – Elapsed playing time.
• Audio – Selected audio language or channel.
• Subtitle – Selected subtitle.
• Angle – Selected angle/ total number of angles.
• Sound – Selected sound mode.
5
Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
Note
If any button is not pressed for a few seconds, the onscreen display disappears.
Initial Settings
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see the pages 12 to 15.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to the initial screen.
OSD
Select a language for the Setup menu and the onscreen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
To go to the next level:
Press on the remote control.
Original – Refers to the original language in which the
disc was recorded.
To go back to the previous level:
Press
on the remote control.
Other – To select another language, press numeric buttons and then SELECT/ENTER to enter the corresponding 4-digit number according to the language code list
on the page 25. If you enter the wrong language code,
press CLEAR.
12
Before Operation
DISPLAY
Progressive Scan
When you are using the COMPONENT VIDEO OUT
jacks, but are connecting the unit to a standard (analog)
television, set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To Turn ON progressive scan:
TV Aspect
4:3 – Select when a standard 4:3 TV is connected.
Connect component out of the unit to the input of your
monitor/television, set your television or monitor to
Component Input.
Display Mode
1. Select “Progressive Scan” on the DISPLAY menu
then press .
2. Select “On” using the
/
buttons.
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
3. Pressing SELECT/ENTER will set the player to
Progressive scan mode.
Letterbox – Displays a wide picture with bands on the
upper and lower portions of the screen.
Caution
16:9 – Select when a 16:9 wide TV is connected.
Panscan – Automatically displays the wide picture on
the entire screen and cuts off the portions
that do not fit.
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to on in error, you must reset the unit. First, remove the
disc in the unit. Next, press STOP on the remote control
( x ) and hold it for five seconds before releasing it. The
video output will be restored to the standard setting, and
a picture will once again be visible on a conventional
analog TV or monitor.
13
PREPARATION
Progressive Scan Video provides the highest quality pictures with less flickering.
Before Operation
AUDIO
3. Select a rating from 1 to 8 using the
/
buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least
restrictive.
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
4. Press SELECT/ENTER to confirm your rating selection, then press SETUP to exit the menu.
Password
You can enter or change password.
Each DVD disc has a variety of audio output options.
Set the unit’s AUDIO options according to the type of
audio system you use.
Dynamic Range Control (DRC)
With the DVD*1 format, you can hear a program’s
soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you
may wish to compress the dynamic range of the audio
output (the difference between the loudest sounds and
the quietest ones). Then, you may listen to a movie at a
lower volume without losing clarity of sound. Set DRC
to On for this effect.
*1: Dolby Digital only
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
LOCK (Parental Control)
1. Select Password on the LOCK menu and then press
.
2. Follow the step 2 as shown above (Rating).
To change the password, press SELECT/ENTER
when the “Change” option is highlighted. Input a
password and press SELECT/ENTER. Enter it again
and press SELECT/ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
SELECT/ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were used
to rate the DVD video disc, based on the list on the
page 25.
1. Select “Area Code” on the LOCK menu then
press .
2. Follow the step 2 as shown previous paragraph
(Rating).
3. Select the first character using
/
buttons.
4. Press . and select the second character using
/
buttons.
5. Press SELECT/ENTER to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their contents.
Not all discs are rated.
1. Select “Rating” on the LOCK menu then press .
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press SELECT/ENTER.
Enter it again and press SELECT/ENTER. to verify.
If you make a mistake before pressing
SELECT/ENTER, press CLEAR.
14
Before Operation
OTHERS
Semi Karaoke
Semi Karaoke on :
- Turn the “Semi Karaoke” function on.
When you finished singing a score will appear on the
screen.
Semi Karaoke off :
- Turn the “Semi Karaoke” function off.
Fanfare and score do not appears on the screen
PBC(Playback Control)
Playback control provides special navigation features
Mthat are available on some disc. Select [On] to use
this feature.
DivX(R) Registration
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX® VOD service. For more information, visit www.divx.com/vod.
1. Select “DivX(R) Registration” option and then press
.
2. Press SELECT/ENTER while “Select” is selected
and the registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on this
unit.
Available discs for the Semi Karaoke function:
• DVD discs
• DVD Karaoke discs
Note
• This function operate on the DVD/CD mode.
• The Semi Karaoke function is available only when a
microphone is connected.
• Watching movies, “off ” the Semi Karaoke or enjoy it
without connecting the MIC at the SET UP menu if the
fanfare or score appears during changing a chapter.
3. Press SELECT/ENTER to exit.
Note
All the downloaded videos from DivX® VOD can only be
played back on this unit.
15
PREPARATION
When a chapter/ title / track is fully finished, this function
shows the score in the screen with a fanfare sound.
Operation
General features
Discs
Buttons
Operations
Z (OPEN / CLOSE)
Opens or closes the disc tray.
X (PAUSE)
During playback, press X to pause playback.
ALL
Press X repeatedly to play Frame-by-Frame.
DVD
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
ALL
SKIP (. / >)
ALL
DivX
Press SKIP . twice briefly to step back to the previous
chapter/track.
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD : 5 steps (BB, BBB, BBBB, BBBBB, BBBBBB)
(FF, FFF, FFFF, FFFFF, FFFFFF)
DivX disc:4 steps (BB, BBB, BBBB, BBBBB)
(FF, FFF, FFFF, FFFFF)
WMA/MP3, Audio CD m(X2, X4, X8) or BB (X2, X4, X8)
ALL
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Audio CD, DivX/MP3/WMA discs: Track/All/Off
ALL
REPEAT A-B
During playback, press REPEAT A-B to select a point A and a
point B, and the device repeats a sequence from point A
(Starting point) to point B (End point).
Press REPEAT A-B to exit.
DVD
ZOOM
During playback or in the pause mode, press ZOOM to the
video image (3 steps).
You can move through the zoomed picture using / /
/
buttons.
DVD
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
MENU
The disc menu appears on the screen.
DVD
S-TITLE (SUBTITLE)
During playback, press S-TITLE repeatedly to select a
desired subtitle language.
DVD
DivX
AUDIO
(AUDIO language)
During playback, press AUDIO repeatedly to hear a different
audio language or audio track.
DVD
DivX
SLOW
In the pause mode, press m or M to select required
speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
DVD
Note on general features:
• Zoom may not work on some DVDs.
• The A-B repeat function is available only in the current title.
16
Operation
Additional features
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press
/ to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers you
entered. Then input the correct numbers.
4. Press SELECT/ENTER to confirm. Playback starts
from the selected time.
Marker Search DVD
DivX
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the desired
point on the disc. The Marker icon appears on the TV
screen briefly. Repeat to enter up to nine markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press / to select a marker
number that you want to recall or clear.
3. Press SELECT/ENTER and playback starts from the
marked scene. Or press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
1.5 speed playback
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in the
memory even if you remove the disc from the unit or
switch off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Note
This unit does not memorize the scene of a disc if you
switch off the unit before commencing to play the disc.
System Select
You must select an appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE/STEP remote control for more
than 5 seconds to be able to select a system
(PAL, NTSC or AUTO).
- When the selected system is not compatible with the
system of your TV, normal colour picture may not be
displayed.
NTSC: Select when the unit is connected with
NTSC-TV.
PAL:
Select when the unit is connected with PAL-TV.
AUTO: Select when the unit is connected with Multi
system TV.
Camera Angle DVD
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
1. Press DISPLAY and then press the
a angle.
/
to select
The number of the current angle appears in the display
window.
2. Select a desired angle pressing the
/
buttons.
DVD
ACD
To Select a disc directly
MP3
WMA
Press DISC SELECT 1, 2 or 3 buttons on the front
panel during playing or stopping.
The unit will automatically start playing the selected
disc.
You can quickly enjoy a music and movie.
The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal
speed.
B) button during the normal play1. Press the PLAY(B
back.
The screen will appear at “ BX11.5 ” speed
with sound .
B).
2. To return to the normal PLAY, press PLAY(B
Normal speed→X1.5 speed → Normal speed...
17
OPERATION
Time Search DVD
Last Scene Memory DVD
Operation with Audio CD or MP3/WMA file
Playing an Audio CD or MP3/WMA file
Programmed Playback
This unit can play Audio CDs or MP3/WMA files.
The program function enables you to store your favorite
tracks from any disc in the unit memory. A program can
contain 300 tracks.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recording media
Audio CD, a menu appears on the TV screen.
Press
/
to select a track/file and then press PLAY
B) or SELECT/ ENTER, and playback starts. You can
(B
use variable playback functions. Refer to the page 16.
ID3 TAG
When playing a file containing information such as track
titles, you can see the information by pressing DISPLAY
repeatedly.
The information [ Folder and file name, Song, Artist,
Album, Genre,Comment,Time information] of the
MP3/WMA file will be shown in the display window and
TV screen.
To move next or previous files press the
SKIP(./>)button.
T ip
• Press MENU to move to the next page.
• On a CD with MP3/WMA and JPEG, you can switch
MP3/WMA and JPEG. Press TITLE, and the word
MUSIC or PHOTO on top of the menu is highlighted.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps
(WMA)
• The unit cannot read an MP3/WMA file that has a
file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files.We recommend that you use Easy-CD Creator, which creates
an ISO 9660 file system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files on the disc should be less
than 999.
This unit requires discs and recordings to meet certain
technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set
to these standards. There are many different types of
recordable disc formats (including CD-R containing
MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible
playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always be sought from the copyright owner.
18
a disc.
1 Insert
Audio CD and MP3/WMA Discs
a track on the “List”, and then press
2 Select
PROG./MEMO. or select “
(Add)” icon and
then press SELECT/ ENTER to place the selected track on the “Program” list. Repeat to place
additional tracks on the list.
Note
You can add all tracks in the disc. Select “
icon then press SELECT/ ENTER.
(Add All)”
the track you want to start playing on the
3. Select
“Program” list. Press MENU to move to the next
page.
B) or SELECT/ENTER to start.
PLAY (B
4 Press
Playback begins in the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
resume normal playback from programmed
5 Toplayback,
select a track of AUDIO CD
B).
(or MP3/WMA) list and then press PLAY (B
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat icon
appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on a programmed list.
• Off(No display): does not play repeatedly.
Erasing a Track from “Program” List
1. Use
/
to select the track that you wish to
erase from the Program list.
2. Press CLEAR. Alternatively, select “
(Delete)”
icon then press SELECT/ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list.
Erasing the Complete Program List
Use
/
to select “
SELECT/ENTER.
(Del all)” and then press
Note
The programs are also cleared when the disc is
removed.
Operation with JPEG file
Slide Show
This unit can play discs containing JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on right.
Use
/
/ / to highlight the
then press SELECT/ENTER.
1
Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
(Slide Show)
OPERATION
Viewing a JPEG files
Moving to another File
Press . or > once during viewing a picture to
advance to the next file or to the previous file.
Still Picture
1. Press PAUSE/STEP during slide show.
The player will now go into the PAUSE mode.
B) or press
2. To return to the slide show, press PLAY(B
PAUSE/STEP again.
To rotate picture
2
Press
/
to select a folder, and press
SELECT/ENTER. A list of files in the folder
appears.
T ip
If you are in a file list and want to return to the Folder
list, use the
/
buttons on the remote control to
highlight “
” and press SELECT/ENTER to return to
the previous menu screen.
you want to view a particular file, press
3 IfSELECT/ENTER
/
to highlight a file and press
B).
or PLAY(B
Slide Show starts from the selected file if Speed
option is not Off.
x) to
While viewing a file, you can press STOP(x
move to the previous menu (JPEG menu).
T ip
• Press MENU to move to the next page.
• There are four Slide Speed options:
:
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use
/
/ / to highlight the Speed. Then, use
/ to select the option you want to use then press
SELECT/ENTER.
• If you set Speed option to Off, Slide Show is not
active.
Press
/
/ / during showing a picture to rotate
the picture clockwise or counter-clockwise.
Zoom
The Zoom function allows you to enlarge or reduce a
video image.
1. Press ZOOM repeatedly.
Zoom on y Zoom off
2. Use the
/
/ / buttons on the “Zoom on”
mode.
JPEG disc compatibility with this player is limited
as follows:
• Depending upon the size and number of JPEG files,
it could take a long time for the unit to read the
disc’s contents. If you don’t see an on-screen display after several minutes, some of the files may be
too large — reduce the resolution of the JPEG files
to less than 2760 x 2048 pixels and burn another
disc.
• The total number of files and folders on the disc
should be less than 999.
• Some discs may be incompatible due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
• File names without “.jpg” extension will not be able
to be read by this unit. Even though the files are
shown as JPEG image files in Windows Explorer.
19
Operation with DivX file
The unit can play the DivX files.
Insert a disc and close the tray.
The DivX menu appears on the TV screen.
1
DivX disc compatibility with this player is limited
as follows:
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
• The file name of the DivX subtitle is available by
20-40 characters (if differs according to language).
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark in the
display.
• If the number of the screen frame is over 30 per 1
second, this unit may not operate normally.
/
to select a folder, and press
2 Press
SELECT/ENTER to see the folder contents.
T ip
If you are in a file list and want to return to the Folder
list, use the
/
buttons on the remote control to
highlight “
” and press SELECT/ENTER to return to
the previous menu screen.
to view a particular file, press
3 If you/ want
to highlight a file and press
B).
SELECT/ENTER or PLAY(B
Playback starts.
4
x) to exit.
Press STOP(x
Note
• Be sure to select the “SUBTITLE ON” mode by pressing the
subtitle file every time before playing a DivX file .
• When the subtitle has more than two languages in the file,
original subtitle is only available.
• The microphone does not work during playing a DivX file.
Notice for displaying the DivX subtitle
If the subtitle does not display properly during playback,
press and hold S-TITLE about 3 seconds then press
S-TITLE to select another language code until the subtitle
is displayed properly.
20
• If the video and audio structure of recorded file is
not interleaved, either video or audio is outputted.
Playable DivX subtitle file
• SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable DivX file
• ".avi ", ".mpg ", ".mpeg "
Playable Codec format
• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",
"MP43 ", "3IVX ", "MP42 ".
Playable Audio format
• "AC3 ", "PCM ", "MP3 ", "WMA ".
- Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
- Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
Presetting the radio stations
Listening to the radio
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned the volume down to the minimum level.
1
1
Press TUNER/BAND on the remote control to
show either FM or AM in the display window. Or
Press TUNER on the front panel.
Every time you press this button, AM and FM
changes alternately.
Select a station you want by pressing
2 remote
TUNING (-/+) on the front panel or
control.
/
Press TUNER/BAND on the remote control to
show either FM or AM in the display window. Or
Press TUNER on the front panel.
The last received station is tuned in.
Press
/
on the remote control repeatedly
the preset station you want.
2 toEachselect
time you press this button, the unit tunes in
the next preset station.
Adjust the volume by turning VOLUME
on the
KNOB (or pressing VOLUME (-/+) on
3 CONTROL
the remote control) repeatedly.
Note
To listen to non-preset radio stations
• Automatic Tuning
• For manual tuning, see “Manual Tuning”.
• For automatic tuning, see “Automatic Tuning”.
Press TUNING (-/+) or / for more than 0.5
second.
- Scanning stops when the unit tunes in a station.
• Manual Tuning
Press TUNING (-/+) or
/
briefly and repeatedly.
Press PROG./MEMO. on the remote control.
A preset number will flash in the display window.
3
Press
/
on the remote control to select the
4 preset number you want.
Press PROG./MEMO. again.
5 The station is stored.
Repeat steps 1 (or 2) to 5 to store other sta6 tions.
To clear all memorized stations
Press and hold PROG./MEMO. on the remote control
for about two seconds, “ERASE ALL” appears in the
display window and then press PROG./MEMO. on the
remote control, the stations are cleared.
To select a preset radio station directly
You can use the number buttons on the remote control
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
To turn the radio off
Press POWER to turn off the unit or select another
function mode (DVD/CD, TAPE, AUX or USB).
For your reference
• If a FM program is noisy ;
Press ST./MONO repeatedly so that that “STEREO”
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
ST./MONO again to restore the stereo effect.
• To improve reception ;
Reposition the supplied antennas.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 4-5 .
To recall preset numbers
Press and hold
/
on the remote control until the
desired preset number appears or press the button
repeatedly.
21
OPERATION
Operation with RADIO
Operation with RADIO
RDS Function : OPTIONAL
Programme Search (PTY) : OPTIONAL
About RDS : OPTIONAL
A major benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
shows the abbreviations used to indicate each PTY
along with an explanation of the PTY.
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of
musical selection and the correct time.
RDS Tuning : OPTIONAL
When a FM station containing RDS data is tuned in, the
unit will automatically display the station’s call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS
services programme (PS) if transmitted by the station.
RDS Display Options : OPTIONAL
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station name,
broadcast network or call letters. Pressing RDS on the
front panel enables you to cycle through the various
data types in the sequence:
(FREQUENCY → PTY →RT →CT → PS)
• PTY (Programme type recognition)The programme type is shown in the display window.
• RT (Radio text recognition)- The radio station’s
name is displayed in the display window.
• CT (Time controlled by the channel)- Enable the
unit to receive the actual time and show it on the
display window.
• PS (Programme Service name)- The programme
title is displayed in the display window.
Note
Some RDS stations may not choose to include some of
these additional features. If the data required for the
selected mode is not being transmitted, the Display
Window will show a PTY NONE, RT NONE, CT
NONE,or PS NONE message.
!
You may search for a specific Programme Type (PTY)
by following these steps:
TUNER (or TUNER/BAND) to select FM
1 Press
mode.
PTY on the remote control, the display
2 Press
will show the last PTY in use.
3 Press PTY repeatedly to select a desired PTY.
the PTY is selected, press and hold PTY.
4 When
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
22
Basic Playback
Recording
Basic Setting
Press TAPE1-2 (or TAPE) to select tape function.
Select a function you want to record except
function.
1 (“NO TAPE ” appears in the display window.)
1 tape
Open the cassette deck TAPE 2 and insert a
Open cassette TAPE1-2 by pushing to the
cassette into the cassette compartment.
2 blank
2 ZPUSH EJECT position.
Set the recording direction
one or two cassettes with the tape side
3 Insert
to the bottom and then close the TAPE 1 (and/or
Recording from Radio, CD or Auxiliary
2) door.
4
Press G.
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays front side of cassette, the
unit stops automatically.
To Stop Play
source
1
2
Press STOP (x) on the front panel or TAPE
STOP(x) on the remote control during playback.
Press REC/[] on the front panel or z/[] on the
remote control.
“REC” flashes and holds the cassette in pause
mode.
Press REC/[] on the front panel or z/[] on the
remote control.
The recording begins.
To pause the recording
Press REC/[] or z/[].
To Play Rewind or Fast Forward
To Stop the recording
BB > on the front panel or
After press . bb/B
FF/GG on the remote control during playback,
press G at the tape position you want.
Press STOP(x).
Dubbing
This function shows how to record from tape to tape.
1
Press TAPE1-2 (or TAPE).
• Cassette TAPE 1- Insert the playback tape to dub.
• Cassette TAPE 2- Insert a blank tape to copy on.
Press DUBB.
- Normal speed copying
2 DUBBING
To stop recording, press STOP (x).
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete
CD and programmed titles automatically into a cassette.
1
2
3
Press DVD button on the remote control.
Press CD SYNC. in stop mode.
“REC” flashes and “CD SYNC” displays in the
display window.
The synchronized recording is started
automatically after about 7 seconds.
Note
• If you wish to record from the desired track, select
the desired track with . bb/BB > or ./>
before commencing CD synchro recording.
• You cannot change any mode during recording.
23
OPERATION
Operation with TAPE
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Symptom
Correction
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
The power is on, but the
unit does not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
No picture.
• The TV is not set to receive DVD signal output.
• Select the appropriate video input mode on
the TV so the picture from the unit appears
on the TV screen.
• The video cable is not connected securely.
• Connect the video cable into the jacks
securely.
• The connected TV power is turned off.
• Turn on the TV.
• The equipment connected with the audio
cable is not set to receive DVD signal output.
• Select the correct input mode of the audio so
you can listen to the sound from the unit.
• The audio cables are not connected securely.
• Connect the audio cable into the jacks
securely.
• The power of the equipment connected with
the audio cable is turned off.
• Turn on the equipment connected with the
audio cable.
There is no sound or only
a very low-level sound is
heard.
• The audio connecting cord is damaged.
• Replace it with new one.
The playback picture is poor.
• The disc is dirty.
• Clean the disc.
The unit does not start
playback.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type,
color system and Regional code.)
• The disc is placed upside down.
• Place the disc with the playback side down.
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to turn off the menu
screen.
• The Rating level is set.
• Cancel the Rating function or change the rating level.
• The plugs and jacks are dirty.
• Wipe them with a cloth slightly moistened
with alcohol.
• The disc is dirty.
• Clean the disc.
• The speakers and components are
connected poorly.
• Connect the speakers and components
securely.
• The unit is located with too close to the TV.
• Move your TV away from the audio components.
• The antenna is positioned or connected
poorly.
• Connect the antenna securely.
• The signal strength of the stations is too
weak (when tuning in with automatic tuning).
• Tune in the station manually.
• No stations have been preset or preset stations have been cleared (when tuning by
scanning preset stations).
• Preset the stations.
• The remote control is not pointed at the
remote sensor of the unit.
• Point the remote control at the remote sensor
of the unit.
• The remote control is too far from the unit.
• Operate the remote control within about 23 ft
(7 m).
• There is an obstacle in the path of the
remote control and the unit.
• Remove the obstacle.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
• The DVD/ CD function is not selected.
• Select the DVD/ CD function by pressing DVD/
Severe hum or noise is
heard.
Radio stations cannot be
tuned in.
The remote control does
not work properly.
The disc tray is not
opened
24
• Adjust the antennas and connect an external
antenna if necessary.
CD button. And then press the
ZOPEN/CLOSE button.
Language Code List
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Code
6566
6565
6570
8381
6577
6582
7289
6583
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
Language
Finnish
French
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Lingala
Lithuanian
Code
7073
7082
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
Language
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Code
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
Language
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Code List
Choose an area from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Country
Code
Ethiopia
ET
Fiji
FJ
Finland
FI
France
FR
Germany
DE
Great Britain
GB
Greece
GR
Greenland
GL
Heard and McDonald
Islands
HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Country
Code
Malaysia
MY
Maldives
MV
Mexico
MX
Monaco
MC
Mongolia
MN
Morocco
MA
Nepal
NP
Netherlands
NL
Dutch Antilles
AN
New Zealand
NZ
Nigeria
NG
Norway
NO
Oman
OM
Pakistan
PK
Panama
PA
Paraguay
PY
Philippines
PH
Poland
PL
Portugal
PT
Romania
RO
Russian Federation RU
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
25
REFERENCE
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Specifications
General
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Refer to the main label.
Refer to the main label
5.4 kg (MDD102)
5.32 kg (MDD 62)
273 X 371 X 326 mm
Tuner/Amplifier
FM
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
AM Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
87.5 - 108.0 MHz or 65 -74 MHz, 87.5 -108.0 MHz
10.7 MHz
60/55 dB (Mono/Stereo)
50 - 10000 Hz
522 - 1620 kHz or 520 - 1720 kHz
450 kHz
30 dB
140 - 1800 Hz
50 W + 50 W (4 Ω, THD 10 %)
0.5 %
40 - 20000 Hz
75 dB
DVD/CD player
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
Video output
Component Video output
Cassette tape player
40 - 20000 Hz
More than 75 dB (1 kHz)
More than 55 dB (1 kHz)
More than 80 dB
1.0 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω
(Pb)/(Pr) 0.7 V (p-p), 75 Ω
Tape Speed
Wow Flutter
F.F/REW. Time
Frequency Response
Signal to Noise Ratio
Channel Separation
Erase Ratio
Speakers
Speaker Name
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
Front Speaker (L/R)
Bass Reflex 2Way 2Speaker
4Ω
60 - 20000 Hz
86 dB/W (1m)(MDS102V)
84 dB/W (1m)(MDS62V)
50 W (MDS102V)
30 W (MDS62V)
100 W (MDS102V)
60 W (MDS62V)
220 X 342 X 241 mm
3.4 kg (MDS102V)
3.2 kg (MDS62V)
Designs and specifications are subject to change without notice for improvement.
P/NO : MFL57236516
3000 ± 3 % (MTT-111.
NORMAL-SPEED)
0.25 %
(MTT -111, JIS-WTD)
120 sec (C-60)
250 - 8000 Hz
43 dB
50 dB (P/B)/45 dB (R/P)
55 dB (MTT-5511)
Download PDF

advertising