LG | MBT506 | LG MBT506 Owner’s Manual

OWNER’S MANUAL
DVD MINI HI-FI SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
MBT506 (MBT506, MDS505V/ W)
MBT506-A0P_DLKALL_ENG_0753.indd 1
2012-02-13 �� 12:25:50
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
MBT506-A0P_DLKALL_ENG_0753.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2012-02-13 �� 12:25:51
Getting Started
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Copyrights
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent
copyrighted material without permission. This
product features the copy protection function
developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and
playing the pictures of these discs picture noise
will appear. This product incorporates copyright
protection technology that is protected by U.S.
patents and other intellectual property rights. Use
of this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p UNIT, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/ Live File System : Disc format system for
Windows Vista)
MBT506-A0P_DLKALL_ENG_0753.indd 3
2012-02-13 �� 12:25:51
4
Table of Contents
Table of Contents
1
Getting Started
2
6
6
6
6
Safety Information
Unique Features
Accessories
Introduction
– Playable Discs
6
7
7
7
8
9
10
12
– About the & Symbol Display
– Symbol Used in this Manual
– Regional Codes
– Playable file Requirement
– DivX file requirement
Remote control
Front panel
Rear panel
2 Connecting
13
13
13
14
14
15
15
15
15
16
16
Connecting to speakers
– Attaching the speakers to the unit
Connections to Your TV
– Component Video Connection
– Video Connection
Optional Equipment Connection
– AUX In Connection
– USB Connection
– Enjoying audio from an external
source and selecting the function
– AUDIO (PORT. IN) In Connection
Antenna Connection
3 System Setting
17
17
Adjust the Setup settings
– OSD Initial language settings Optional
17 – To display and exit the Setup Menu
18 – Language
18 – Display
19 – Audio
20 – Lock (Parental Control)
21 – Others
MBT506-A0P_DLKALL_ENG_0753.indd 4
4 Operating
22
22
22
23
24
25
26
26
26
26
26
27
27
28
28
29
29
29
29
30
30
30
30
30
31
31
31
31
31
31
32
32
32
33
33
33
34
34
34
Using the Home Menu
Basic Operations
– Disc/USB Operations
iPod Operation
– Playing the iPod
– Enjoying iPod on the screen
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– Starting play from selected
time
– Marked Playback
– Changing subtitle code page
– AUTO DJ playback
– Viewing a PHOTO file
– Sleep Timer Setting
– Dimmer
– Turn off the sound temporarily
– 1.5 times speed playback
– Screen Saver
– System Select - Optional
– Last Scene Memory
– DEMO
– VOCAL FADER
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting a saved station
– Deleting all the saved stations
– Improving poor FM reception
– Setting the USER EQ
– Setting the Clock
– Using your player as an alarm clock
Sound adjustment
– Setting the surround mode
– Adjust the speaker level settings
Advanced Operations
– Listening to music from your portable
player or external device
– Recording to USB
2012-02-13 �� 12:25:51
Table of Contents
5
5 Troubleshooting
36 Troubleshooting
6 Appendix
37
37
37
38
39
40
41
Maintenance
– Handling the Unit
– Notes on Discs
Area Code List
Language code List
Trademarks and Licenses
Specifications
1
2
3
4
5
6
MBT506-A0P_DLKALL_ENG_0753.indd 5
2012-02-13 �� 12:25:51
6
1
Getting Started
Getting Started
Unique Features
Introduction
Portable In
Playable Discs
Listens to music from your portable device. (MP3,
Notebook, etc)
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG files. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
USB Direct Recording
Records music to your USB device.
Accessories
DVD-VIDEO (8 cm / 12 cm disc)
Please check and identify the supplied accessories.
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
Video mode and finalized only
DVD-RW (8 cm / 12 cm disc)
Video mode and finalized only
Video cable (1)
FM antenna (1)
DVD+R: Video mode only
Supports the double layer disc also
DVD+RW (8 cm / 12 cm disc)
Video mode and finalized only
Remote control (1)
Battery (1)
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the & Symbol Display
“&” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that disc.
AM antenna (1)
MBT506-A0P_DLKALL_ENG_0753.indd 6
2012-02-13 �� 12:25:52
Getting Started
Symbol Used in this Manual
All discs and file listed below
MP3/ WMA music file requirement
MP3 files
MP3/ WMA file compatibility with this unit is limited
as follows :
DVD and finalized DVD±R/RW
yy S ampling frequency : within 32 kHz to 48 kHz (MP3), within 32 kHz to 48 kHz (WMA)
WMA files
DivX files
t
Playable file Requirement
Audio CDs
JPG files
Regional Codes
it rate : within 32 kbps to 320 kbps (MP3), 40
yy B
kbps to 192 kbps (WMA)
yy Support Version : v2, v7, v8, v9
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO 9660/ JOLIET
e recommend that you use Easy-CD Creator,
yy W
which creates an ISO 9660 file system.
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
Photo file requirement
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy Max pixel in width : 2 760 x 2 048 pixel
yy If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
1
Getting Started
r
7
JPEG disc compatibility with this unit is limited as
follows :
yy Maximum files : Under 999
yy S ome discs may not operate due to a different
recording format or the condition of disc.
yy File extensions: “.jpg”
yy CD-ROM file format : ISO 9660/ JOLIET
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
MBT506-A0P_DLKALL_ENG_0753.indd 7
2012-02-13 �� 12:25:52
8
1
Getting Started
Compatible USB Devices
DivX file requirement
yy MP3 Player : Flash type MP3 player.
DivX file compatibility with this unit is limited as
follows :
yy USB Flash Drive : Devices that support USB2.0 or
USB1.1.
Getting Started
yy T he USB function of this unit does not support
some USB devices.
USB device requirement
evices which require additional program
yy D
installation connected to a computer, are not
supported.
yy Do not extract the USB device while in operation.
yy Available resolution: up to 800 x 600 (W x H) pixels.
yy The file name of the DivX subtitle should be
entered 45 characters or less.
yy If there is a code impossible to express in the
DivX file, it may be displayed as a “ _ “ mark on
the display.
yy Frame rate : less than 40 fps.
yy F or a large capacity USB, it may take longer than
a few minute to be searched.
yy If the video and audio structure of recorded
files are not interleaved, either video or audio is
output.
yy To prevent data loss, back up all data.
yy Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
sing NTFS file system is not supported. (Only
yy U
FAT(16/32) file system is supported.)
yy T his unit is not supported when the total
number of files is 1 000 or more.
yy E xternal HDD, Card readers, Locked devices, or hard type USB devices are not supported.
SB port of the unit cannot be connected to PC.
yy U
The unit can not be used as a storage device.
yy Playable Codec format : “DIVX3.xx”, “DIVX4.xx”,
“DIVX5.xx”, “MP4V3”, “3IVX”.
yy Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
yy Sampling frequency : between 32 to 48 kHz
(MP3), between 32 to 48 kHz (WMA)
yy Bit rate : between 32 to 320 kbps (MP3), 40 to
192 kbps (WMA)
yy For Discs formatted in Live file system, you can
not use it on this unit.
yy If the name of movie file is different from that of
the subtitle file, during playback of a DivX file,
subtitle may not be display.
yy If you play a DivX file differ from DivX spec, it
may not operate normally.
MBT506-A0P_DLKALL_ENG_0753.indd 8
2012-02-13 �� 12:25:52
Getting Started
9
Remote control
• • • • • • a • • • • • •
D.SKIP : Choose a desired disc.
POWER : Switches the unit ON
or OFF.
OPEN/CLOSE : Opens and
closes the disc Drawer.
• • • • • • d • • • • • •
AUTO DJ : Selects the AUTO DJ
mode. (For more information
refer to the page 28)
SOUND EFFECT : Selects a
sound effect mode.
m INFO/DISPLAY : Accesses
On-Screen Display.
SPEAKER LEVEL : Sets the
sound level of desired speaker.
MUTE : Mutes the sound.
0 to 9 numerical buttons :
Selects numbered options in a
menu.
• • • • • • b • • • • • •
MARKER : Marks play list.
W/S/A/D (up/ down/
left/ right): Used to navigate
on-screen displays.
REPEAT : Selects a play mode.
(Repeat/Random)
TUNING (-/+) : Tunes in the
desired radio station.
ENTER : Acknowledges menu
selection.
Presetting the radio station.
RETURN : Moving back wards in
the menu.
• • • • • • d • • • • • •
TV Control buttons : Controls
the TV. (LG TV only)
-- You can control the sound
level, input source, and
power switching of LG TVs as
well. Hold POWER (TV) and
press PR/CH (W/S) button
repeatedly until the TV turns
on or off.
TITLE : If the current DVD
title has a menu, the title
menu appears on the screen.
Otherwise, the disc menu may
appear.
REC (X) : USB Direct Recording.
• • • • • • c • • • • • •
ECHO VOL (+/ - ) : Adjusts echo
volume.
STOP (Z) : Stops playback or
recording.
PLAY (d), MONO/STEREO :
Starts playback. Selects Mono/
Stereo.
1
VOL (Volume) (+/-) : Adjusts
speaker volume.
DISC MENU : Accesses the
menu on a DVD disc.
PRESET (+/-) : Selects
programmed of Radio.
Remove the battery cover on
the rear of the Remote Control,
and insert one (size AAA)
battery with 4 and 5 matched
correctly.
SCAN (c/v) : Searches
backward or forward.
SLEEP : Sets the system to turn
off automatically at a specified
time. (Dimmer : The display
window will be darken by half.)
HOME : Displays the [Home]
menu.
Battery Installation
SKIP (C/V) : Goes to next
or previous chapter/ track/ file.
Getting Started
RADIO&INPUT : Changes input
sources.
CLEAR : Removes a track
number on the Program List.
MIC VOL (+/ - ) : Adjusts
microphone volume.
VOCAL FADER : You can enjoy
the function as karaoke, by
reducing singer vocal of music
in the various source.
PAUSE/STEP (M) : Pauses
playback.
MBT506-A0P_DLKALL_ENG_0753.indd 9
2012-02-13 �� 12:25:52
10
Getting Started
Front panel
1
Getting Started
28
a
t
b
c
s
d
r
e
q
x
u
p
f
o
g
h
w
i
y
v
27
n
z
m
j
l
k
MBT506-A0P_DLKALL_ENG_0753.indd 10
2012-02-13 �� 12:25:53
Getting Started
a Disc tray
b 1/! (Power)
c Display window
LOCK
e C
For setting the clock and checking the time.
f USER EQ
Controls sound register.
g LG SOUND EFFECT
You can select a Natural or Local Specialization
equalizer effect.
hBASS BLAST
Reinforces the treble, bass and surround effect.
MP3 Opt.
Optimizes compressive MP3 files so that it
improves the treble sound.
i PORT. IN jack
j PHONES
k USB port
l MULTI JOG DIAL
Moves to the another file/ track or you can
select the tuning range.
s M / SET
Pauses playback. /Confirms the settings. C / TUNING / PRESET z / PRESET +
V / TUNING +
Z / STOP
Stops playback or recording.
t AUTO DJ
Selects the AUTO DJ mode. (For more
information refer to the page 28)
u HOME
Displays the [Home] menu.
1
Getting Started
IMER
d T
With the TIMER function you can turn USB, CD
play and TUNER reception on or off at a desired
time.
11
v ECHO VOL.
w RADIO
Selects the RADIO function.
x iPod
Selects the iPod function
y MIC VOL.
26 AUX/PORTABLE
Selects the AUX, PORTABLE function.
27 MASTER VOLUME
Controls the volume when using any function.
28 iPod dock
m MIC jack.
n
Recording to USB
o DEMO
In power off state to demonstrate the function
on display window.
p SOUND EFFECT
Chooses sound impressions.
q DISC SKIP
Chooses a desired CD
rOPEN/CLOSE
MBT506-A0P_DLKALL_ENG_0753.indd 11
2012-02-13 �� 12:25:53
12
Getting Started
Rear panel
1
Getting Started
c
a
d
e
b
f
g
a Speaker terminal
b Cooling fan
c VIDEO OUT connector
d ANTENNA (FM, AM)
e OUT PUT (COMPONENT VIDEO) connector
f IN PUT (AUX) connector
g Power cord.
MBT506-A0P_DLKALL_ENG_0753.indd 12
2012-02-13 �� 12:25:53
Connecting
Connecting to
speakers
Attaching the speakers to the
unit
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
,,Note
yy Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the unit.
Use only one of the connections described
in this manual.
yy Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
2
Connecting
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
13
yy Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel.
yy Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.
Colour
Speaker
Position
Orange
Sub woofer
Any front position
Red
Front
Front right
White
Front
Front left
>>Caution
yy Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
yy The speakers contain magnet parts, so
color irregularity may occur on the TV
screen or PC monitor screen. Please use the
speakers far away from either TV screen or
PC monitor.
MBT506-A0P_DLKALL_ENG_0753.indd 13
2012-02-13 �� 12:25:53
14
Connecting
Component Video Connection
Video Connection
Connect the COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks on the unit to the
corresponding input jacks on the TV using
component cables. You can hear the sound through the system’s
speakers.
Connect the VIDEO OUT jack on the unit to the
video in jack on the TV using a video cable.
2
Connecting
Yellow
TV
TV
Green
Blue
Red
MBT506-A0P_DLKALL_ENG_0753.indd 14
2012-02-13 �� 12:25:53
Connecting
Optional Equipment
Connection
15
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
AUX In Connection
Connect an Output of auxiliary device to the AUX
(L/R) INPUT Connector.
2
Connecting
Red
White
,,Note
Removing the USB Device from the unit
1. Choose a different function/mode or
press STOP (Z) twice in a row.
To the audio output jacks
of your component
(TV, VCR, etc.)
,,Note
If your TV has only one output for audio
(mono), connect it to the left (white) audio
jack on the unit.
MBT506-A0P_DLKALL_ENG_0753.indd 15
2. Remove the USB device from the unit.
Enjoying audio from an
external source and selecting
the function
You can enjoy audio from an external source
through your unit. And you can select the function.
Press RADIO&INPUT repeatedly to select the
desired input source or the function. - DVD/CD,
AUX, iPod, PORTABLE, FM, AM
2012-02-13 �� 12:25:54
16
Connecting
AUDIO (PORT. IN) In
Connection
Antenna Connection
Connect an output of portable device (MP3 or PMP
etc) to the AUDIO (PORT. IN) input connector.
Connect the supplied FM/ AM antenna for listening
to the radio.
Connect the AM Loop antenna to the AM antenna
connector. (A)
Connect the FM wire antenna to the FM antenna
connector. (F)
2
Connecting
MP3 player, etc...
,,Note
yy To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
yy Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna,
keep it as horizontal as possible.
MBT506-A0P_DLKALL_ENG_0753.indd 16
2012-02-13 �� 12:25:54
System Setting
Adjust the Setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item, see pages 17 to 21.
OSD Initial language settings
- Optional
1. Press POWER to turn the unit on.
The language setup menu will appear on the
screen.
To display and exit the Setup
Menu
1. Press HOME.
Displays the [Home] Menu.
2. Select an [Setup] by using A/D.
3. Press ENTER.
Displays the [Setup].
4. Press HOME or RETURN to exit in the [Setup]
Menu.
About help menu for Setup
Menu
Buttons
w/s,
Move
W/S
Moving to another
menu.
a,
Move
A
Moving to previous
level.
d,
Move
D
Moving to next level
or selecting menu.
x,
RETURN
To exit the [Setup]
menu or [2.1 Speaker
Setup].
Close
2. Use W/S/A/D to select a language then
press ENTER.
The confirm menu will appear.
b,
Select
ENTER
Operation
3
System Setting
When using this unit for the first time, the initial
language setup menu appears on your TV screen.
You must complete initial language selection
before using the unit. English will be selected as the
initial language.
17
To confirm menu.
3. Use A/D to select [Enter] then press
ENTER to finish the language setup.
MBT506-A0P_DLKALL_ENG_0753.indd 17
2012-02-13 �� 12:25:54
18
System Setting
Language
Display
Menu Language
TV Aspect
Select a language for the Setup menu and then on
screen display.
Select which screen aspect to use based on the
shape of your TV screen.
Disc Audio/Disc Subtitle/Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Refers to the original language in which the disc
was recorded.
Display Mode
3
[Other]
System Setting
To select another language, press numeric
buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 39. If you enter the
wrong language code, press CLEAR.
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Off (for Disc Subtitle)]
Turn off Subtitle.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This fills the entire 4:3 screen, cropping the
picture as necessary.
Progressive Scan
(For Component Video connections)
Selects whether the COMPONENT
VIDEO(PROGRESSIVE SCAN) OUT jacks output
progressive signal. If your TV accepts progressive
format signals, you will enjoy accurate color
reproduction and high quality image by selecting
[On]. If your TV does not accept progressive format
signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc from the
unit. Next, press and hold STOP (Z) for about five
seconds. The video output will be restored to the
standard setting, and a picture will be visible on
your TV.
MBT506-A0P_DLKALL_ENG_0753.indd 18
2012-02-13 �� 12:25:54
System Setting
Audio
2.1 Speaker Setup
Make the following settings for the built-in 5.1
channel surrounds decoder.
1. Select [2.1 Speaker Setup] on the [Audio] menu.
2. Press ENTER.
The [2.1 SPEAKER] appears.
19
[Speaker]
Select a speaker that you want to adjust.
,,Note
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fixed, you cannot
change the settings.
[Volume]
Adjust the output level of each speaker.
3
[Distance]
Adjust the distance between each
speaker and the listening position.
4. Adjust options using W/S/A/D buttons.
[Speaker Test Start]
5. Returns to the previous menu by pressing
RETURN.
Select [Speaker Test Start] by using the W/S and press ENTER. Press ENTER again
to stop. Adjust the volume to match the
volume of test signals memorized in the
system.
MBT506-A0P_DLKALL_ENG_0753.indd 19
System Setting
3. Use A/D to select the desired speaker.
2012-02-13 �� 12:25:54
20 System Setting
DRC (Dynamic Range Control)
Lock (Parental Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Initial Setting of the Area Code
Vocal
When you use this unit for the first time, you have
to set the Area Code as shown below.
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
Semi Karaoke
3
When a chapter/ title/ track is fully finished, this
function shows the score in the screen with a
fanfare sound.
System Setting
[On]
When you finished singing a score will appear
on the screen.
1. Select the [Lock] menu and then press D.
2. Press D.
To access the [Lock] options, you must input the
password you have created. Input a password
and press ENTER. ENTER it again and press
ENTER to verify. If you make a mistake before
pressing ENTER, press CLEAR.
3. Select the first character using W/S buttons.
4. Press ENTER and select the second character
using W/S buttons.
5. Press ENTER to confirm your Area code
selection.
[Off]
Rating
Fanfare and score do not appears on the screen.
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
,,Note
yy DVD, DVD Karaoke discs with more than 2
tracks are available discs for this function.
yy When you watch movies, “off ” the Semi
Karaoke at the SETUP menu or enjoy it
without connecting the MIC if the fanfare
or score appears during changing a
chapter.
yy This function operate on the DVD/CD
mode.
yy The Semi Karaoke function is available only
when a microphone is connected.
1. Select [Rating] on the [Lock] menu then press
D.
2. Input a password and press ENTER.
3. Select a rating from 1 to 8 using the W/S
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4. Press ENTER to confirm your rating selection.
MBT506-A0P_DLKALL_ENG_0753.indd 20
2012-02-13 �� 12:25:54
System Setting
21
Password
Others
You can enter or change password.
DivX(R) Registration
1. Select [Password] on the [Lock] menu and then
press D.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
2. Input a password and press ENTER.
To change the password, press ENTER when
the [Change] option is highlighted. Input a
password and press ENTER. Enter it again and
press ENTER to verify.
3. Press HOME to exit the menu.
,,Note
If you forget your password, you can clear it
using the following steps:
2. Input the 6-digit number “210499” and
press ENTER. The password is cleared.
If a disc is inserted, this function is not
operated.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 38.
[Register]
Displays the registration code of your unit.
[Deregister]
Deactivate your unit and display the deactivation
code.
3
System Setting
1. Select the [Setup] menu on the [Home]
menu.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
,,Note
All the downloaded videos from DivX® VOD
can only be played back on this unit.
1. Select [Area Code] on the [Lock] menu then
press D.
2. Input a password and press ENTER.
3. Select the first character using W/S buttons.
4. Press ENTER and select the second character
using W/S buttons.
5. Press ENTER to confirm your Area code
selection.
MBT506-A0P_DLKALL_ENG_0753.indd 21
2012-02-13 �� 12:25:54
4
Operating
22 Operating
Using the Home Menu
Basic Operations
1. Press HOME.
Displays the [Home] menu.
Disc/USB Operations
1. Insert the disc by Pressing OPEN/CLOSE
or connect the USB device to the USB port.
2. Press HOME.
Displays the [Home] Menu.
2. Select an option by using A/D.
3. Press ENTER then select option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or displays
the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
4
Operating
MBT506-A0P_DLKALL_ENG_0753.indd 22
3. Select an option by using A/D.
If you select the [Movie], [Photo] or [Music]
option when you connect up to two devices, it
appears as above.
4. Press ENTER then selected option menu.
,,Note
yy For the most Audio CD and DVD-ROM
discs, playback starts automatically.
yy The unit plays only music file contained
in the USB storage device or disc
automatically.
2012-02-13 �� 12:25:55
Operating 23
To
Do this
iPod Operation
Stop
Press Z.
Playback
Press d.
You can enjoy the sound with your iPod. For details
about iPod, refer to the iPod’s User Guide.
During playback, press
PAUSE/STEP.
Preparation
Pause
Press PAUSE/STEP repeatedly
Frame-by-Frame
to play title Frame-by-Frame.
playback
(DVD, DivX only)
During playback, press or
rotate;
(1) to go to the next track/ file
or to return to the beginning
of current track/file:
Skipping to the
next/ previous
chapter/ track/
file
- On the remote control: C
or V
- On the unit: MULITI JOG DIAL
or C/V
- On the remote control: C
- On the unit: MULITI JOG DIAL
or C
Locating a
point quickly by
playing a file in
fast forward or
fast reverse
Playing
repeatedly or
randomly
Slowing down
the playing
speed
-- Be sure to use the video connection through
the COMPOSITE jack on the rear panel of this
unit. Select the appropriate video input mode
on the TV.
-- Depending on the iPod, make sure that select
Videos > Video settings, and then set TV Out
to Ask or On from your iPod. For details about Video Settings, refer to the
iPod User Guide.
-- The viewing photos is available only if this unit
is in iPod IN mode and you can view photos
only as a slide show. You have to start a slide
show on your iPod to view a photo on a TV.
For details about a slide show, refer to the iPod
User Guide.
yy Before connecting the iPod, turn this unit off and
reduce the volume of this unit to its minimum.
4
Operating
(2) to go back to the previous
track/file:
yy To view iPod’s Videos and Photos on the TV
screen.
During playback, press and
hold c or v on remote
control or C or V on the
unit repeatedly to select the
required scan speed.
To return to normal speed,
press PLAY.
Press REPEAT repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
- Random play mode : only
music files.
In the pause mode, press
SCAN (c or v) to select
the required speed. (DVD,
DivX only) - The DivX file can
not be slow down reverse play
back.
MBT506-A0P_DLKALL_ENG_0753.indd 23
2012-02-13 �� 12:25:55
24 Operating
Playing the iPod
Button
1. Connect the iPod firmly.
4
Operating
If you turn this unit on, your iPod is
automatically turned on and recharging starts.
If your iPod is completely discharged, charge
the battery first.
2. Press iPod on the unit or FUNCTION on the
remote control to select iPod function. You can
operate your iPod through an iPod’s display
by using the supplied remote control and also
control on your iPod.
Do this
ON UNIT
ON REMOTE
SET/M
d/M
Pause or restart
C/V
./ >
Skip
C/V
(Press and
hold)
(Press and
hold)
c/v
Search
-
REPEAT
To select a
desired repeat
mode: Track (
), All ( ), Off
(No display).
-
W/S/A/D
Selects an option
in the menu.
d
d, ENTER
Starts playback.
Compatible iPod
yy We recommend installing the latest software
version.
yy The unit supports the models as follows, iPod
nano, 1G, 2G, 3G, 4G/ iPod classic/ iPod 4G, 5G/
iPod touch 2G. For some models, the unit may not operate
depending on the firmware version.
yy Depending on your iPod’s software version, it
may not be possible to control your iPod from
the player.
yy Unsupported iPod models are recognized as an
USB device when connected.
MBT506-A0P_DLKALL_ENG_0753.indd 24
2012-02-13 �� 12:25:55
Operating 25
,,Note
yy An error message “CHECK” or “Connected
iPod model is not supported.” appears
when:
-- your iPod is not available for the function
to be operated.
yy An error message “CHECK” or “Please update
iPod’s software.” appears when:
-- your iPod has an old software version.
Update your iPod software to latest
/
version.
yy Compatibility with your iPod may vary
depending on the type of your iPod.
yy iPod touch and iPhone have any difference
in operation other than iPod. You may need
any additional control to use them with this
unit. (e.g. “slide to unlock”)
1. Connect the iPod firmly.
2. Press [Music] or [Movie].
If you connected the other device (CD or USB), select the iPod on the menu and
ENTER.
3. Select a content using W/S/A/D, and press
ENTER..
4
Moving to the previous or
next file list.
4. Operate iPod.
Refer to basic operation section.
Operating
yy If this unit displays an error message, follow
the message. An error message “CHECK” or
“Please check your iPod.” appears when:
-- the communication between this unit
and your iPod is failed.
Undock & re-dock your iPod in this
/
unit.
-- your iPod is not connected firmly.
-- this unit recognises your iPod as
unknown device.
-- your iPod is exceptionally low on power.
The battery needs to be charged.
/
If you charge the battery while
/
iPod is extremely low in power, it may
take longer to charge.
Enjoying iPod on the screen
,,Note
The controls on your iPod are not operational
in this mode.
yy If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod dock of this unit and then use it.
yy Depending on your iPod’s software version,
it may not be possible to control your iPod
from this unit. We recommend installing
the latest software version.
yy The video quality depends on the video
sources on your iPod.
yy If you have a problem with your iPod,
please visit www.apple.com/support/ipod.
MBT506-A0P_DLKALL_ENG_0753.indd 25
2012-02-13 �� 12:25:56
26 Operating
Other Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1. Press m INFO/DISPLAY to show various
playback information.
The displayed items differ depending on the
disc type or playing status.
2. You can select an item by pressing W/S and
change or select the setting by pressing A/D.
4
To display the DVD Menu
r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1. Press DISC MENU.
The disc’s menu appears.
2. Select the menu by using W/S/A/D.
3. Press PLAY to confirm.
To display the DVD title
r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
Operating
Title
-- Current title number/ total number
of titles.
1. Press TITLE.
The disc’s title appears.
Chapter
-- Current chapter number/total
number of chapters.
3. Press PLAY to confirm.
Time
-- Elapsed playing time.
Audio
-- Selected audio language or
channel.
Subtitle
-- Selected subtitle.
Angle
-- Selected angle/ total number of
angles.
,,Note
If any button is not pressed for a few seconds,
the onscreen display disappears.
2. Select the menu by pressing W/S/A/D.
Starting play from selected
time
r
To start playing at any chosen time on the file or
title.
1. Press m INFO/DISPLAY during playback.
2. Press W/S to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4. Press ENTER to confirm. Playback starts from
the selected time.
MBT506-A0P_DLKALL_ENG_0753.indd 26
2012-02-13 �� 12:25:56
Operating 27
Marked Playback
t
The mark function enables you to store your
favourite files from any disc or USB device in the
unit memory.
1. Select [Music] on the [Home Menu].
Returning to the upper folder.
(MP3/ WMA only)
File information will be displayed
according to the ID3TAG information
on the appropriate music file. (MP3
only)
To delete a Marker
1. Use W/S to select the track that you wish to
erase from the marked file.
2. Press MARKER.
To delete all Markers
Use W/S/A/D to select [Deselect All] then
press ENTER in program edit mode.
,,Note
The markers are also cleared when the disc or
USB device is removed, the unit is switched
to power off or the function is switched to
others.
Changing subtitle code page
Selecting all tracks/ files.
Deselecting all tracks/files.
Moving to the previous or
next file list.
2. Select a desired music on the [List] by using the
W/S then press MARKER to appears the mark
on the list.
1. During playback, press m INFO/DISPLAY to
display the On-Screen display.
2. Use W/S to select the [Code Page] option.
4
Operating
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
3. Use A/D to select desired code option.
4. Press RETURN (x) to exit the On-Screen
display.
3. Press ENTER or d PLAY.
Displays the play mode.
4. Select the play mode by using the W/S and
press ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback.
,,Note
If you want to select all files on the list, select
[Select All] and press ENTER.
MBT506-A0P_DLKALL_ENG_0753.indd 27
2012-02-13 �� 12:25:56
28 Operating
AUTO DJ playback
Viewing a PHOTO file
t
Auto DJ blends the end of one song into the
beginning of another for seamless playback. it
equalizes volume across tracks for uninterrupted
playback.
This unit can play discs with photo files.
1. Select [Photo] on the [Home Menu] and press
ENTER.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
order, RANDOM (AUTO DJ RANDOM) -> (AUTO DJ
SEQUENTIAL) -> (AUTO DJ OFF).
4
Mode
Display
Window
OFF
-
(AUTO DJ OFF)
RANDOM
RANDOM
(AUTO DJ
RANDOM)
Returning to the
menu.
REPEAT
(AUTO DJ
SEQUENTIAL)
Hiding the help
menu.
Moving to the previous or
next file list.
Description
Moving to
another file.
Operating
,,Note
yy Searching for a section or playing repeatedly
or randomly is not supported on the AUTO
DJ mode.
Returning to the upper
folder.
2. Press W/S to select a folder, and then press
ENTER.
3. If you want to view a slide show, press W/S to
highlight a file and press PLAY.
About help menu in the [Photo] menu
yy If you switch to other functions or stop the
music using STOP on the unit (STOP (Z)
on the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
Menu
Buttons
d Slide
Show
PLAY
yy AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
wsad
Move
W/S/A/D
yy All musics are repeated continually until the
user deactivates the AUTO DJ function.
b
Select
ENTER
yy During recording AUTO DJ function is not
available.
x
Close
RETURN
yy If you change a disc while the AUTO
DJ function is activated the function is
deactivated.
MBT506-A0P_DLKALL_ENG_0753.indd 28
Operation
Viewing a slide
show.
Moving to another
file or content.
Viewing a
particular file.
Returning to the
[Home Menu].
2012-02-13 �� 12:25:56
Operating 29
Sleep Timer Setting
About help menu in the full screen
Menu
Buttons
Operation
Menu
m INFO/
DISPLAY
Displaying the Option
menu.
A/D
Moving to another file.
a/d
Prev./ Next
x,
Close
RETURN
Returning to the
[Photo] menu.
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press m INFO/DISPLAY to display the option menu.
2. Select an option using W/S/A/D.
c
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in
the display window.
Dimmer
d
e
a Current photo/ Total number of photos –
Use A/D to view previous/next photo.
b Slide Show z/M– Press ENTER to start or
pause slide show.
c Speed x3/ x2/ x1 – Use ENTER to select a
delaying speed between photos in a slide
show.
d Rotate – Press ENTER to rotate the photo.
e Go to list – Press ENTER to return [Photo]
menu.
Turn off the sound temporarily
Press
MUTE to mute your unit.
4
Operating
b
To check the remaining time, press SLEEP.
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
a
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
You can mute your unit in order, for example, to
answer the telephone, appears the in the display
window.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press PLAY to play at 1.5 times
speed. “dX1.5” appears on the screen.
2. Press PLAY again to exit.
MBT506-A0P_DLKALL_ENG_0753.indd 29
2012-02-13 �� 12:25:56
30 Operating
Screen Saver
VOCAL FADER
System Select - Optional
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the VOCAL FADER, and “FADE ON” will appear in
display window.
unit in Stop mode for about five minutes.
You must select the appropriate system mode for
your TV system. Press and hold M (PAUSE/STEP)
for more than five seconds to be able to select a
system in the [Home] menu. (AUTO/ PAL/ NTSC)
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
4
To cancel it, press VOCAL FADER again. The quality
of the VOCAL FADER may be different depending
on the recording conditions of music files. This
function is available only when MIC is connected.
,,Note
yy This function is available to use only when
a microphone is connected.
yy It is not available on the MONO source.
DEMO
Operating
In power off state to demonstrate the function on
display window.
MBT506-A0P_DLKALL_ENG_0753.indd 30
2012-02-13 �� 12:25:56
Operating
Radio Operations
Be sure that both FM/AM aerials are connected.
(Refer to the page 16)
Listening to the radio
1. Press RADIO&INPUT until FM/AM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by rotating MASTER
VOLUME on the front panel or by pressing VOL
(+/-)on the remote control repeatedly.
You can preset 50 stations for FM/AM.
Before tuning, make sure that you have turned
down the volume.
Deleting a saved station
1. Press PRESET - / + to Select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected preset
number.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
Improving poor FM reception
Press PLAY (MONO/STEREO) on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
4
Operating
Presetting the Radio Stations
31
1. Press RADIO&INPUT on the remote control or
RADIO on the unit until FM or AM appears in
the display window.
2. Press or rotate to select a desired frequency;
- On the remote control: TUNING (-/+)
- On the unit: MULITI JOG DIAL or C / V
3. Press ENTER a preset number will flash in the
display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press ENTER.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. Press to select a preset station;
- On the remote control: PRESET -/+ or
0 to 9 numerical buttons
- On the unit: PRESET - / PRESET + z
MBT506-A0P_DLKALL_ENG_0753.indd 31
2012-02-13 �� 12:25:56
32 Operating
Setting the USER EQ
You can listen to music with the desired sound
effect by adjusting the BASS, MIDDLE and TREBLE.
1. Press USER EQ.
“USER EQ” is displayed.
2. Press SET/M to enter the USER EQ.
3. Select the BASS, MIDDLE or TREBLE sound effect
you want by using
PRESET - / z PRESET
+.
4. Press C TUNING -/ V TUNING + or
rotating MULTI JOG DIAL on the unit to select
the sound level you want.
1. Turn the power on.
2. Press TIMER. Each functions flashes.
3. Press SET/M when the function you want to be
woken by is showing.
4. “ON TIME” will be displayed. This is where you
set the time you want the alarm to start. Rotate
the MULTI JOG DIAL knob or press C / V
to change the hours and minutes and SET/M to
save.
5. To finish the setting, press SET/M.
5. The “OFF TIME” will be displays. This is where you
set the time you want the function to stop.
Setting the Clock
6. Rotate the MULTI JOG DIAL knob or press C
/ V to change the hours and minutes and
press SET/M to save.
1. Turn the power on.
2. Press CLOCK for at least 2 seconds
4
Using your player as an alarm
clock
Operating
3. Choose from either, by rotating the MULTI JOG
DIAL knob or pressing C / V.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET/M for confirm your selection
5. Select the hours, by rotating the MULTI JOG
DIAL knob or pressing C / V.
6. Press SET/M.
7. Select the minutes, by rotating the MULTI JOG
DIAL knob or pressing C / V.
8. Press SET/M.
7. Rotate the MULTI JOG DIAL knob or press C
/ V to change the hours and minutes and
press SET/M to save. The clock icon “ ” shows
that the alarm is set.
8. Press TIMER button 2 times. You can check the
setting status.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “ ” by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “ ” and setting
information by pressing TIMER even when
the unit is turned off.
MBT506-A0P_DLKALL_ENG_0753.indd 32
2012-02-13 �� 12:25:57
Operating 33
Sound adjustment
On Display
BYPASS
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
You can change the SOUND EFFECT using A/
D arrow key while the sound effect information is
displayed on.
The displayed items for the equalizer maybe
different depending on sound sources and effects.
On Display
Description
NAT PLUS
You can enjoy the natural
sound effect same as a
5.1-channel. (optional)
NATURAL
You can enjoy comfortable
and natural sound.
AUTO EQ
POP
CLASSIC
JAZZ
ROCK
Regionally optimized sound
effect. (DANGDUT/ ARABIC/
PERSIAN/ INDIA/REGUETON/
MERENGUE/ SAMBA/ SALSA)
Sets the sound equalizer on
the mode that is the most
similar to the genre which is
included in the MP3 ID3 tag of
song files.
,,Note
yy In some of surround modes, some
speakers, there's no sound or low
sound. It depends on the mode of
surround and the source of audio, it is
not defective.
yy You may need to reset the surround
mode, after switching the input,
sometimes even after the sound track
changed.
Adjust the speaker level
settings
You can adjust the sound level of each speaker.
1. Press SPEAKER LEVEL repeatedly to select a
desired speaker to set.
2. Press VOL -/+ to adjust the sound level of the
selected speaker while the level setting memu
is displayed on the display window.
4
3. Repeat and adjust the sound level of the other
speakers.
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
rock pop, jazz or classic
concert.
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
During playback, reinforce
the treble, bass and surround
sound effect.
LOUDNESS
Improves the bass and treble
sound .
VIRTUAL
You can enjoy the sound
without equalizer effect.
Operating
Local
Specialization
equalizer
Description
You can enjoy more virtual
surround sound.
MBT506-A0P_DLKALL_ENG_0753.indd 33
2012-02-13 �� 12:25:57
34 Operating
Advanced Operations
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external devices.
1. Connect the portable player to the PORT.IN(PORTABLE IN) connector of the unit.
Or
4
Connect the external device to the AUX
connector of the unit.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to record.
3. Playback a sound source first.
4. Press
on the unit or REC on the remote
control.
5. Press the
on the unit or REC on the remote
control button once more when
“USB REC” is displayed.
> Recording starts.
[All tracks/ files recording]
Record to USB in stop or play mode.
2. Turn the power on by pressing POWER.
[Program list recording]
3. Select the PORTABLE or AUX (L/R) INPUT
function by pressing RADIO&INPUT.
After marking desired file(s) and you can record
it to USB (Refer to the pagepage 27).
4. Turn on the portable player or external device
and start it playing.
6. To stop recording, press Z.
Operating
It’ll be stored as follows.
Audio CD
MP3/ WMA
The other
sources (Tuner,
AUX, Portable,
etc)
MBT506-A0P_DLKALL_ENG_0753.indd 34
2012-02-13 �� 12:25:57
Operating 35
,,Note
yy You can check the recording percentage
rate for the USB record on the screen
during the recording. (Audio CD or MP3/
WMA CD only)
yy During recording MP3/WMA, there is no
sound.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored.
yy Do not remove the USB device during USB
recording. It will result in an incomplete file
being made and may not be deleted on a
PC.
yy If USB recording does not work, messages
like “NO USB”, “ERROR”, “USB FULL” or “NO
REC” will be displayed on the display
window
yy Multi card reader device or external HDD
can not be used for USB recording.
yy When you stop recording during playback,
the file will not be stored. (In case of audio
disc)
4
Operating
yy A file is recorded by 128 Mbyte (about 2
hours) when you record for a long term.
There are recorded less than 4 files.
yy USB record is not possible from CD-G discs.
yy During recording, you can select a function
by pressing, HOME, AUX/ PORTABLE/
iPod, RADIO on the unit or HOME,
RADIO&INPUT on the remote control.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
MBT506-A0P_DLKALL_ENG_0753.indd 35
2012-02-13 �� 12:25:57
5
Troubleshooting
36 Troubleshooting
Troubleshooting
PROBLEM
No power
No picture
CORRECTION
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
Connect the video cables securely to both the TV and unit.
Select the correct input mode of the unit so you can hear the sound
from the unit.
There is little or no sound
Connect the audio cables into the connection terminals correctly.
Replace with a new audio cable.
The DVD picture quality is poor
Clean the disc using a soft cloth with outward strokes.
Insert a disc.
A DVD/CD will not play
Insert a playable disc (check the disc type, colour system and
regional code).
Place the disc with the label or printed side facing upwards.
Enter your password or change the rating level.
5
Troubleshooting
Humming noise heard while a DVD
or CD is playing
Clean the disc using a soft cloth with outward strokes.
Move unit and audio components further away from your TV.
Check the antenna connection and adjust its position.
Radio stations can’t be tuned in
properly
Attach an external aerial if necessary.
Tune to the station manually.
Preset some radio stations, see pagepage 31 for details.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 23 feet (7m) of the unit.
The remote control doesn’t work
well / at all
There is an obstacle in the path between the remote control and
the unit.
Remove the obstacle.
The battery in the remote control are flat.
Replace the battery with new ones.
iPod does not work
MBT506-A0P_DLKALL_ENG_0753.indd 36
Check whether the player is connected to the unit correctly.
Connect it to the unit correctly.
2012-02-13 �� 12:25:57
Appendix 37
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Maintaining the Unit
MBT506-A0P_DLKALL_ENG_0753.indd 37
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
2012-02-13 �� 12:25:57
38 Appendix
Area Code List
Choose an area code from this list.
Area
Afghanistan 6
Code Area
AF Fiji Code Area
Code Area
Code
FJ Monaco MC Singapore SG
SK
Argentina AR Finland FI Mongolia MN Slovak Republic Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Appendix
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
MBT506-A0P_DLKALL_ENG_0753.indd 38
LY Russian LU Federation Vietnam RU Zimbabwe SA
TH
VN
ZW
SN
2012-02-13 �� 12:25:57
Appendix 39
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Code
Language
Code
Language
Code
Language
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Ameharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laothian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
MBT506-A0P_DLKALL_ENG_0753.indd 39
Code
6
Appendix
Language
2012-02-13 �� 12:25:57
40 Appendix
Trademarks and
Licenses
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
“Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
6
Appendix
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
MBT506-A0P_DLKALL_ENG_0753.indd 40
2012-02-13 �� 12:25:58
Appendix
41
Specifications
General
Power requirements
Refer to main label.
Power consumption
Refer to main label.
Dimensions (W x H x D)
273 x 333 x 339 mm without foot
Net Weight (Approx.)
5.7 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Bus Power Supply (USB / iPod)
DC 5 V 0 500 mA
Inputs/ Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p),
75 Ω, RCA jack x 2
ANALOG AUDIO IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
PORT. IN
0.5Vrms (3.5 mm stereo jack)
Amplifier
Stereo mode
Surround mode
150 W + 150 W (4 Ω at 1 KHz)
Front
150 W + 150 W (4 Ω at 1 KHz)
Subwoofer
200 W (3 Ω at 60 Hz)
Tuner
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range
522 to 1 620 kHz, 520 to 1 710 kHz or 522 to 1 710 kHz
CD
Frequency Response
40 to 20 000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
80 dB
MBT506-A0P_DLKALL_ENG_0753.indd 41
6
Appendix
FM Tuning Range
2012-02-13 �� 12:25:58
42 Appendix
Front Speaker
Type
2 Way 2 speaker
Impedance Rated
4Ω
Input Power
150 W
Max. Input Power
300 W
Net Dimensions (W x H x D)
240 x 387 x 336 mm
Net Weight
5 kg
Passive Subwoofer
Type
1 Way 1 Speaker
Impedance Rated
3Ω
Input Power
200 W
Max. Input Power
400 W
Net Dimensions (W x H x D)
261 x 331 x 409 mm
Net Weight
6.5 kg
Design and specifications are subject to change without notice.
6
Appendix
MBT506-A0P_DLKALL_ENG_0753.indd 42
2012-02-13 �� 12:25:58
MBT506-A0P_DLKALL_ENG_0753.indd 43
2012-02-13 �� 12:25:58
Download PDF

advertising