LG | OM7550D | LG OM7550D Owner’s Manual

ENGLISH
OWNER’S MANUAL
DVD MINI
HI-FI AUDIO
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
OM7550D
*MFL68982111*
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 1
www.lg.com
2015-08-31
5:00:12
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products
around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 2
2015-08-31
5:00:13
Getting Started
3
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
Getting Started
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 3
1
2015-08-31
5:00:13
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
7Introduction
7
– Playable Discs
7
– About the “7” Symbol Display
7
– Symbols Used in this Manual
7
– Regional Codes
8
Playable file Requirement
8
– Music file requirement
8
– Photo file requirement
8
– Video file requirement
9
Remote control
10 Top panel
11 Front panel
12 Rear panel
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 4
2Connecting
13
15
15
15
16
17
17
17
18
18
19
Use of Tripod
Connecting the Power cord
Connections to Your TV
– HDMI Out Connection
– Resolution Setting
Optional Equipment Connection
– AUX IN Connection
– AUX OUT Connection
– PORT. IN Connection
– USB Connection
– Antenna Connection
3 System Setting
20 Adjust the setup settings
20 – OSD Initial language settings Optional
20 – To display and exit the Setup menu
21 – Language
21 – Display
22 – Audio
22 – Lock (Parental Control)
2015-08-31
5:00:13
Table of Contents
5
1
4Operating
24
24
25
25
26
26
28
28
28
28
28
28
29
29
29
30
30
30
30
30
30
30
30
31
31
32
33
Using the Home Menu
Basic Operations
Playback Effect
– AUTO DJ
Using a BLUETOOTH® wireless
technology
– Listening to music of a BLUETOOTH
device
Radio Operations
– Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
– Deleting a saved station
Sound adjustment
– Setting the sound mode
– Setting the USER EQ
Advanced Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– 1.5 times speed playback
– Screen Saver
– Starting play from selected time
– Resume playback
– Changing subtitle code page
– Marked Playback
– Viewing a PHOTO file
– Recording to USB
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 5
34
34
34
34
34
34
34
35
35
35
35
36
36
37
37
37
Other Operations
– Sleep Timer Setting
– Dimmer
– Last Scene Memory
– Power Resume - Optional
– System Select - Optional
– Turn off the sound temporarily
– CHILDSAFE Mode
– DEMO
– VOCAL FADER
– Using Microphone
– LIGHTING MODE
Setting the Clock
– Using your player as an alarm clock
Auto power down
How to disconnect the wireless network
connection or the wireless device.
38 AUTO POWER On
38 Auto function change
39 LG Sound Sync
2
3
4
5
5Troubleshooting
40Troubleshooting
6Appendix
42 Controlling a TV with the Supplied
Remote Control
42 – Setting up the remote to control your
TV
43Maintenance
43 – Handling the Unit
43 – Notes on Discs
44 Area Code List
45 Language code List
46 Trademarks and Licenses
47 General specifications
2015-08-31
5:00:13
6
Getting Started
Unique Features
1
BLUETOOTH®
Accessories
Please check and identify the supplied accessories.
Getting Started
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Remote Control (1)
Battery (1)
Power cord (1)
FM Antenna (1)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Full HD up-scaling
Views Full HD picture quality with simple setup.
HDMI cable (1)
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 6
2015-08-31
5:00:14
Getting Started
Introduction
Playable Discs
DVD-VIDEO (8 cm/12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm/12 cm disc)
Video mode and finalized only.
DVD-RW (8 cm/12 cm disc)
Video mode and finalized only.
DVD+R: Video mode only
Supports the double layer disc also.
DVD+RW (8 cm/12 cm disc)
Video mode and finalized only.
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 7
Symbols Used in this Manual
r
DVD-Video, DVD±R/RW in Video
mode or VR mode and finalized
t
Audio CDs
y
Video files contained in the
USB/Disc
u
Audio files contained in the
USB/Disc
i
Photo files contained in the
USB/Disc
1
Getting Started
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, MP3, WMA and/or JPEG files.
Some DVD±RW/DVD±R or CD-RW/CD-R cannot be
played on this unit due to the recording quality or
physical condition of the disc, or the characteristics
of the recording device and authoring software.
7
,,Note
Indicates special notes and operating features.
,,Tip
Indicates tip and hints for making the task easier.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
2015-08-31
5:00:15
8
Getting Started
Playable file
Requirement
1
Getting Started
Music file requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Support Version : v2, v7, v8, v9
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO9660 file system.
yy You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File
System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system
for Windows Vista)
The DTS is not supported. In case of DTS audio
format, audio is not output.
Photo file requirement
Photo file compatibility with this unit is limited as
follows :
yy Max pixel in width : 2760 x 2048 pixel
yy Maximum files : Under 999
yy Some discs may not operate due to a different
recording format or the condition of disc.
Video file requirement
Video file compatibility with this unit is limited as
follows:
yy Available resolution: within 720 x 576 (W x H)
pixels.
yy The file name of the Video subtitle should be
entered within 45 characters.
yy If there is impossible code to express in the
Video file, it may be displayed as “ _ “ mark on the
display.
yy Frame rate : less than 30 fps.
yy If the video and audio structure of recorded
files is not interleaved, either video or audio is
outputted.
yy Playable Video file : “.avi”, “.mpg”, “.mpeg”
yy Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
yy Playable Codec format :
“Xvid”, “MPEG-1”, “MPEG-2”
yy Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”,
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192
kbps (WMA)
yy For Discs formatted in Live file system, you can
not it on this unit.
yy If the name of movie file is different from that of
the subtitle file, during playback of a Video file,
subtitle may not be display.
yy If you play a Xvid file differ from Xvid spec, it may
not operate normally.
yy If you play GMC video file which is more than
1-warp point, video playback screen will not
smooth.
yy File extensions: “.jpg”
yy CD-ROM file format : ISO9660/ JOLIET
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 8
2015-08-31
5:00:15
Getting Started
Remote control
B OPEN/CLOSE : Opens and
closes the disc tray.
m INFO/DISPLAY : Accesses OnScreen Display.
n HOME : Displays the [Home
Menu].
DISC MENU : Accesses the menu
on a DVD disc.
• • • • • • b • • • • • •
W/S/A/D (up/ down/ left/
right) : Used to navigate on-screen
displays.
PRESET +/- : Selects programme
of Radio.
TUNING +/- : Tunes in the desired
radio station.
b ENTER : Acknowledges menu
selection.
Presetting the radio stations.
x BACK : Moves backwards in
the menu or exits the setup menu.
TITLE: If the current DVD title has
a menu, the title menu appears
on the screen. Otherwise, the disc
menu may not appear.
Battery Installation
• • • • • • c • • • • • •
Z STOP : Stops playback.
• • • • • • d • • • • • •
REGION EQ : Chooses sound
impressions.
SOUND EFFECT : Selects a sound
effect mode.
VOL -/+ (Volume) : Adjusts
speaker volume.
AUTO DJ : Selects the AUTO DJ
mode. (For more information refer
to page 25)
MUTE : Mutes the sound.
1
Getting Started
SLEEP : Sets the System to turn off
automatically at a specified time.
(Dimmer : The display window will
be darken by half.)
9
• • • • • • e • • • • • •
0-9 numerical buttons : Selects
numbered options in a menu.
h REPEAT : Selects a play
mode. (Repeat/ Random)
CLEAR : Removes a number when
setting the password.
• • • • • • f • • • • • •
TV Control buttons : See page 42.
X REC : USB Direct Recording.
? : This button is not available.
MIC VOL -/+ : Adjusts microphone
volume.
ECHO VOL -/+ : Adjusts echo
volume.
VOCAL FADER : You can enjoy the
function as karaoke, by reducing
singer vocal of music in the
various source.
d PLAY : Starts playback.
M PAUSE/STEP : Pauses playback.
Remove the battery cover on the
rear of the remote control, and
insert one (size AAA) battery with
4 and 5 matched correctly.
C/V SKIP : Goes to the
next or previous chapter / track /
file.
c/v SCAN : Searches
backward or forward.
• • • • • • a • • • • • •
P FUNCTION : Selects the
function and input source.
MARKER : Marks play list.
1 POWER : Switches the unit ON
or OFF.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 9
2015-08-31
5:00:15
10
Getting Started
Top panel
*1
1
Getting Started
*2
a
1/! POWER ON/OFF
d
USB Port : You can play or record sound files
by connecting the USB device.
HOME : Goes to Home menu.
ENTER / SET : Acknowledges menu
selection.
Presetting the radio stations.
USB REC / DEMO
- Records to USB.
- Shows Demo mode.
*1 - Display window
b
LIGHTING : Turns on/off the lighting effects.
FUNCTION : Selects the function and input
source.
ECHO VOLUME/CONTROL : Adjusts echo
volume.
LG EQ : Chooses sound impressions.
USER EQ : Controls sound register.
c
T
- Starts or pauses playback.
Y/U : Goes to the next or previous
chapter / track / file.
e
Bluetooth : Turns to BLUETOOTH function.
REPEAT : Selects a play mode. (Repeat/
Random)
MIC VOLUME/CONTROL : Adjusts Mic
volume.
CLOCK
Sets a clock and checks a time.
ALARM
With the ALARM function you can turn
DISC, USB play and Tuner reception on at
a desired time.
AUTO DJ
Selects the AUTO DJ mode. (For more
informaion refer to page 25).
BASS BLAST : Selects BASS BLAST or
STANDARD effect directly.
I : Stops playback.
*2 - MASTER VOLUME : Adjusts speaker
volume.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 10
2015-08-31
5:00:16
Getting Started
11
Front panel
1
Getting Started
B
aDisc tray
dRemote sensor
bMIC 1
eMIC 2
cPORT. IN
fB : Opens and closes the disc tray.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 11
2015-08-31
5:00:16
12
Getting Started
Rear panel
1
Getting Started
aANTENNA (FM)
bAUX IN (L/R)
AUX OUT (L/R)
cHDMI OUT
dPower cord
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 12
2015-08-31
5:00:17
2Connecting
Connecting
Use of Tripod
You can mount the unit on a tripod.
The tripod is an optional purchase.
13
3. Tighten up the Hand screw on the bottom of
the unit.
B
>>Caution
yy Extend the tripod legs as much as possible
and tighten up the screw securely.
yy Before connecting with the unit, you must
set up the tripod completely to prevent
shaking.
2
Connecting
1. Unfold the tripod on a flat surface. And then fix
the tripod.
Tighten up the tightening part of the tripod.
2. Lift the speaker and connect the tripod to fixing
part on the bottom of the speaker.
B
>>Caution
Tighten up the Hand screw on the bottom of
the unit while the other is holding a speaker
and tripod.
>>Caution
When connecting the speaker and the tripod,
You should work together with more than two
people.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 13
2015-08-31
5:00:17
14
Connecting
,,Note
yy If you use a tripod, use the tripod only for
speaker.
yy Before buying a tripod, check the
specifications for maximum bearing load
of the center column.
(Unit’s net weight : about 22.7 kg)
,,Note
yy You should limit people around the
unit while using this unit with tripod.
Otherwise it may result in malfunction
and causing personal injury or property
damage.
yy Standing on the stool to reach unit control
panel is risky and might lead to injuries.
B
yy Do not put or attach other objects on the
tripod.
2
Connecting
35 mm
yy Do not shake or push the unit when the
tripod is installed.
(B)
(A)
yy Use tripod as below :
(A) From tripod’s center to tripod’s leg :
above 600 mm
(B) From top of tripod to bottom of tripod
: below 900 mm
(C) Tripod net weight : over 3.9 kg
yy Use a tripod as low as possible for safety
use.
yy You should pull the center column to the
maximum only in case of need.
yy Mount only one unit on each tripod.
yy Do not try to extent the tripod legs
outside over its allowed range.
yy Refrain from moving around the tripod
after unit is installed.
yy Remove the units from all connected
cables of the tripods before moving the
tripods or adjusting their height.
yy When transporting or moving the unit,
always use two or more people.
yy When you use the tripod, use an extension
cord. always be careful the movement of
cable.
yy It is prohibited to use this unit outside.
(Indoor use only)
yy Do not expose the unit to excessive
dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a
heater) to prevent the possibility of panel
disfiguration or damage to the internal
components.
yy Make sure the tripod is correctly
assembled and all its components are
tightly connected.
yy When using the external input cable (Mic,
etc.) after installing the unit on the tripod,
external input cable can cause the unit to
fall down.
yy Do not try to assemble the tripod if parts
are missing or defective.
yy Watch out the people can trip over the
input cable (Mic, etc.) connected the unit.
yy After installation, check whether the unit is
set up firmly on the tripod or not.
yy Always be careful of the unit being
tripped.
yy Do not place the unit on an unstable
position where it might accidentally fall
over.
yy Add weight such as sand bags around the
tripod legs to prevent them from falling
over.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 14
2015-08-31
5:00:18
Connecting
Connecting the Power
cord
1. Connect the power cord to the unit.
2. Plug the power cord into an outlet.
15
Connections to Your
TV
HDMI Out Connection
Unit
2
Connecting
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable).
Connect the HDMI OUT jack on the unit to the
HDMI IN jack on a HDMI compatible TV or monitor.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
TV
,,Tip
yy You can fully enjoy digital audio and video
signals together with this HDMI connection.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 16.)
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 15
2015-08-31
5:00:18
16
Connecting
>>Caution
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the unit and then turn it
on again.
2
Connecting
yy When the HDMI connection with HDCP is
not verified, TV screen is changed to black
or green screen or the snow noise may
occur on the screen. In this case, check the
HDMI connection, or disconnect the HDMI
cable.
Resolution Setting
The unit provides several output resolutions for
HDMI OUT.
You can change the resolution using [Setup] menu.
1.Press n HOME.
2.Use A/D to select the [Setup] and press b
ENTER. The [Setup] menu appears.
yy Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel.
,,Note
yy If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you connect a HDMI or DVI
compatible device make sure of the
following:
- Try switching off the HDMI/DVI device
and this unit. Next, switch on the HDMI/
DVI device and leave it for around 30
seconds, then switch on this unit.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or 576p),
1280 x 720p, 1920 x 1080i or 1920 x 1080p
video input.
3.Use W/S to select [Display] option then press
D to move to the second level.
4.Use W/S to select the [Resolution] option
then press D to move to the third level.
5.Use W/S to select the desired resolution then
press b ENTER to confirm your selection.
,,Note
If your TV does not accept the resolution you
have set on the player, you can set resolution
to 480p (or 576p) as follows:
Press Z STOP for more than 5 seconds.
yy Not all HDCP-compatible HDMI or DVI
devices will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
yy If there is noise or lines on the screen, please
check the HDMI cable and use a higher
version cable than High Speed HDMI™
Cable.
yy If you use LG TV or Bluetooth Function of
the unit, the audio is not output to HDMI.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 16
2015-08-31
5:00:19
Connecting
Optional Equipment
Connection
17
AUX OUT Connection
Connect an input of auxiliary device to the AUX
OUT (L/R) connector.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
AUX IN Connection
Connect an output of auxiliary device (Camcorder,
TV, Player, etc) to the AUX IN (L/R) connector.
2
Connecting
If your device has only one output for audio
(mono), connect it to the left audio jack on the unit.
Red
Audio cable
White
Auxiliary device
Audio cable
DVD, Blu-ray player etc.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 17
2015-08-31
5:00:19
18
Connecting
PORT. IN Connection
USB Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
B
2
Connecting
Portable cable
,,Note
Removing the USB device from the unit :
MP3 player etc.
Listening to music from your
portable player or external device
1. Choose a different function/mode or
press Z STOP on the remote control or
I on the unit twice in a row.
2. Remove the USB device from the unit.
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector on the unit.
Or
Connect the external device to the AUX IN
connector on the unit.
2. Turn the power on by pressing 1/! POWER
ON/OFF.
3.Press P FUNCTION to select the AUX or
PORTABLE function.
4. Turn on the portable player or external device
and start it playing.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 18
2015-08-31
5:00:20
Connecting
19
Compatible USB Devices
Antenna Connection
yy MP3 Player : Flash type MP3 player.
Connect the supplied FM antenna for listening to
the radio.
yy USB Flash Drive :Devices that support USB2.0 or
USB1.1.
yy The USB function of this unit does not support
some USB devices.
Connect the FM wire antenna to the FM antenna
connector.
USB device requirement
yy Devices which require additional program
installation connected to a computer, are not
supported.
2
FM antenna
Connecting
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/32) file system is supported.)
yy This unit is not supported when the total
number of files is 1000 or more.
yy External HDD, Card readers, Locked devices, or hard type usb devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
yy Some USB Devices may not work with this unit.
,,Note
Be sure to fully extend the FM wire antenna.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 19
2015-08-31
5:00:20
20 System Setting
Adjust the setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
To display and exit the Setup
menu
1.Press n HOME.
Displays the [Home Menu].
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item, see pages 20 to 23.
OSD Initial language settings
- Optional
3
System Setting
During the first use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using
the unit. English will be selected as the initial
language.
1.Press 1 (POWER) to turn the unit on. The
language setup menu will appear on the screen.
2. Select an [Setup] by using AD.
3.Press b ENTER.
Displays the [Setup].
4.Press n HOME or x BACK to exit in the
[Setup] Menu.
About help menu for Setup
Menu
Buttons
Operation
WS
Moving to another
menu.
a
Move
A
Moving to previous
level.
d
Move
D
Moving to next
level or selecting
menu.
x BACK
To exit the [Setup]
menu.
b ENTER
To confirm menu.
ws
Move
2.Use WSAD to select a language then press
b ENTER.
The confirm menu will appear.
x
Close
b
Select
3.Use AD to select the [Enter] then press b
ENTER to finish the language setup.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 20
2015-08-31
5:00:21
System Setting
Language
Menu Language
Select a language for the Setup menu and on
screen display.
Disc Audio / Disc Subtitle / Disc
Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
To select another language, press numeric
buttons and then b ENTER to enter the
corresponding 4-digit number according to
the language code list on the page 45. If you
enter the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turns off Subtitle.
Display
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
Resolution
Sets the output resolution of HDMI video signal.
Refer to “Resolution Setting” for details about the
resolution (page 16).
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
3
System Setting
[Other]
21
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
TV Aspect
Outputs 480 (or 576) lines of progressive video.
Select the screen aspect to use based on the shape
of your TV screen.
[480i (or 576i)]
Outputs 480 (or (576) lines of interlaced video.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the
upper and lower portions of the screen.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 21
2015-08-31
5:00:21
22 System Setting
Audio
Lock (Parental Control)
DRC (Dynamic Range Control)
Initial Setting the Area Code:
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
When you use this unit for the first time, you have
to set the Area Code.
HD AV Sync
3
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive:
this is called HD AV Sync. Use WS (on the remote
control) to scroll up and down through the delay
amount, which you can set at anything between 0
and 300ms.
1. Select the [Lock] menu and then press D.
2.Press D.
To access the [Lock] options, you must input the
password you have created. Input a password
and press b ENTER. Enter it again and press
b ENTER to verify. If you make a mistake before
pressing b ENTER, press CLEAR.
3. Select the first character using WS buttons.
4.Press b ENTER and select the second character
using WS buttons.
System Setting
5.Press b ENTER to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
D.
2. Input a password and press b ENTER.
3. Select a rating from 1 to 8 using the WS
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not
active and the disc plays in full.
4.Press b ENTER to confirm your rating selection.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 22
2015-08-31
5:00:21
System Setting 23
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press D.
2.Press b ENTER.
3. Input a password and press b ENTER.
To change the password, press b ENTER when
the [Change] option is highlighted. Input a
password and press b ENTER. Enter it again
and press b ENTER to verify.
4.Press n HOME to exit the menu.
,,Note
If you forget your password, you can clear it
using the following steps:
3
System Setting
1. Select the [Setup] menu on the [Home
Menu].
2. Input the 6-digit number “210499” and
press b ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 44.
1. Select [Area Code] on the [Lock] menu then
press D.
2. Input a password and press b ENTER.
3. Select the first character using WS buttons.
4.Press b ENTER and select the second character
using WS buttons.
5.Press b ENTER to confirm your Area code
selection.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 23
2015-08-31
5:00:21
24 Operating
Using the Home Menu
1.Press n HOME.
Displays the [Home Menu].
2. Select an option by using AD.
3.Press b ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or displays
the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
4
,,Note
Operating
You can not select the [Music], [Movie] or
[Photo] option when the USB device is not
connected or a disc is not inserted.
Basic Operations
1. Insert the disc by pressing B OPEN/CLOSE on
the remote control or B on the unit
Or connect the USB device to the USB port.
2.Press n HOME.
Displays the [Home Menu].
To
Stop
Press Z STOP on the remote
control or I on the unit.
Playback
Press d PLAY on the remote
control or T on the unit.
Pause
Press M PAUSE/STEP on the
remote control or T on the
unit during playback.
Press M PAUSE/STEP
Frame-byrepeatedly to play title FrameFrame playback by-Frame. (DVD Movie title,
Movie file only)
During playback, press
C/ V SKIP to go to the
Skipping to the next chapter/ track/ file or to
next/ previous return to the beginning of the
chapter/ track/ current chapter/ track/ file.
file
Press C SKIP twice briefly
to step back to the previous
chapter/ track/ file.
Locating a
point quickly by
playing a file in
fast forward or
fast reverse
Playing
repeatedly or
randomly
3. Select an option by using AD.
If you select the [Movie], [Photo] or [Music]
option when you connect up to two devices,
it appears as belows. Select a media then press
b ENTER.
4.Press b ENTER then selected option menu.
,,Note
yy For the most Audio CD and DVD-ROM discs,
playback starts automatically.
Do this
During playback, press
c/v SCAN repeatedly to
select the required scan speed.
To return to normal speed,
press d PLAY.
Press h REPEAT repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
- DVD : Chapter/ Title/ Off
- Video(MOVIE) : Title/ All/ Off
- Audio CD/ MP3/ WMA : Track/
All/ Random/ Off
Slowing down
the playing
speed
In the pause mode, press
c/v SCAN to select the
required speed. (DVD Movie
title only)
In the pause mode, press
v SCAN to select the
required speed. (Movie file
only)
yy The unit plays only music file contained in
the USB storage device or disc automatically.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 24
2015-08-31
5:00:21
Operating 25
To
Do this
Selecting Press 0 to 9 numerical buttons on
a track/file the remote control to go to the
directly
desired file or track directly.
Playback Effect
AUTO DJ
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
Press AUTO DJ on the remote control repeatedly,
the display changes as followings. RANDOM (AUTO
DJ RANDOM) -> RPT (AUTO DJ SEQUENTIAL) ->
(AUTO DJ OFF)
Mode
OFF
Display
Window
(AUTO DJ OFF)
Description
-
RANDOM
(AUTO DJ
RANDOM)
The music is played
randomly on this
mode.
REPEAT
RPT
(AUTO DJ
SEQUENTIAL)
The music is played
repeatedly on this
mode.
4
Operating
RANDOM
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly. And AUTO DJ mode
does not support Marked Playback.
yy If you move to other functions or stop the
music by pressing I on the unit twice (or
Z STOP on the remote control twice) on
AUTO DJ mode, AUTO DJ will be disable.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy During recording, AUTO DJ is not available.
yy If you press AUTO DJ during Marked
playback, Marked playback will be disable.
And then AUTO DJ is played.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 25
2015-08-31
5:00:21
26 Operating
Using a BLUETOOTH®
wireless technology
About BLUETOOTH
Bluetooth is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the Bluetooth in the other rooms.
Connecting individual devices under
Bluetooth wireless technology does not incur any
charges. A mobile phone with Bluetooth wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth wireless
technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo Headset.)
4
BLUETOOTH Profiles
Operating
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
Listening to music of a
BLUETOOTH device
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure
the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using
P FUNCTION until BT function is selected or
pressing Bluetooth on the unit.
Appears “BT READY” in display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG MINI(XX:XX)”.
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address
such as 9C:02:98:4A:F7:08, you will see “LG
MINI(F7:08)” on your Bluetooth device.
A2DP (Advanced Audio Distribution Profile)
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on
the display window and change to Bluetooth
device name soon.
,,Note
Depending on the Bluetooth device type,
some device have a different pairing way.
4. Listening to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
(Bluetooth
Function other than the
Bluetooth)
yy Depending on the Bluetooth device type,
some device have a different pairing way.
(Enter the PIN code (0000) as needed.)
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 26
2015-08-31
5:00:21
Operating 27
,,Note
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, headset, etc.
yy When not connected the Bluetooth, “BT
READY” appears on the display window.
yy The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
4
Operating
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy If the function is changed to Bluetooth
again from other function, Bluetooth device
is paired automatically.
yy Bluetooth and LG Sound Sync connection
are unavailable during recording.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 27
2015-08-31
5:00:21
28 Operating
Radio Operations
Presetting the Radio Stations
Be sure that FM antenna is connected. (Refer to
page 19)
Before tuning, make sure to turn down the volume.
Listening to the radio
1.Press P FUNCTION until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING(-/+) on the remote
control or Y/U on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
4
Manual tuning :
Press TUNING(-/+) on the remote control or
Y/U on the unit repeatedly.
Operating
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL (+/-) on the remote
control repeatedly.
Improving poor FM reception
Adjust the antenna to improve the reception when
the radio has poor reception.
You can preset 50 stations for FM.
1.Press P FUNCTION until FM appears in the
display window.
2. Select the desired frequency by pressing
TUNING(-/+) on the remote control or
Y/U on the unit.
3.Press b ENTER a preset number will flash in
the display window.
4.Press PRESET (-/+) to select the preset number
you want.
5.Press b ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET +/- or
0 to 9 numerical buttons on the remote control.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up on the unit display.
2.Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1.Press PRESET - / + to select a preset number
you want to delete.
2.Press CLEAR, the preset number will blink in the
display window.
3.Press CLEAR again to delete the selected preset
number.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 28
2015-08-31
5:00:21
Operating 29
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround
sound fields. You can select a sound mode you
want by using SOUND EFFECT on the remote
control.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
On Display
Description
NATURAL
You can enjoy comfortable and
natural sound.
AUTO EQ
(FORRO/FUNK/SERTANEJ/
DANGDUT/ARABIC/PERSIAN/
INDIA/REGUETON/MERENGUE/
SALSA/SAMBA/CUMBIA/AFRO/
AXE/TECNO BR)
Realizes the sound equalizer that
is the most similar to the genre
of which is included in the MP3
ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual rock, pop,
jazz or classic concert.
BASS
(BASS BLAST)
Reinforces the treble, bass and
surround sound effect.
FOOTBALL
You can enjoy the sound effect
FOOTBALL STADIUM.
FLAT
Setting the USER EQ
You can adjust the sound level of Treble, Middle
and Bass as your preference.
1.Press USER EQ on the unit. “USER EQ” is
displayed.
2.Press USER EQ on the unit to select BASS,
MID(MIDDLE) or TRE(TREBLE).
3.Rotate ECHO VOLUME/CONTROL knob to
adjust the sound level.
4.Press USER EQ to save the setting.
Or
1.Use SOUND EFFECT to select the USER EQ then
press b ENTER.
2.Use WS to select BASS, MID(MIDDLE) or
TRE(TREBLE).
4
3.Use AD to select the sound level of BASS,
MID(MIDDLE) or TRE(TREBLE) then press b
ENTER to save the setting.
Provides balanced sound.
BOOST
Boosts the mid-range for sound
reinforcement.
TREBLE/BASS
(TRE/BASS)
Reinforces the treble and bass.
STANDARD
yy This function is not operated when the
microphone is connected to the unit.
Operating
Local
Specialization
equalizer
(Optional)
Regionally optimized sound
effect.
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
You can enjoy optimized sound.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 29
2015-08-31
5:00:21
30 Operating
Advanced Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1.Press m INFO/DISPLAY to show various
playback information.
The displayed items differ depending on the
disc type or playing status.
2. You can select an item by pressing WS and
change or select the setting by pressing AD.
Title – Current title number/ total number of titles.
Chapter – Current chapter number/ total number
of chapters.
Time – Elapsed playing time.
4
Audio – Selected audio language or channel.
Operating
Subtitle – Selected subtitle.
Angle – Selected angle/ total number of angles.
,,Note
If any button is not pressed for a few seconds,
the on-screen display disappears.
To display the DVD Menu
r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1.Press DISC MENU.
The disc’s menu appears.
2. Select the menu by using WSAD.
3.Press d PLAY to confirm.
To display the DVD title
r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1.Press TITLE.
The disc’s title appears.
2. Select the menu by pressing WSAD.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press d PLAY to play at 1.5
times speed. “dX1.5” appears on the screen.
2.Press d PLAY again to exit.
Screen Saver
The screen saver appears when you leave the unit
in Stop mode for about five minutes.
Starting play from selected
time
ry
To start playing at any chosen time on the file or
title.
1.Press m INFO/DISPLAY during playback.
2.Press WS to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4.Press b ENTER to confirm. Playback starts from
the selected time.
Resume playback
ryut
The unit records the point where you pressed the
Z STOP depending on the disc.
If “MZ (Resume Stop)” appears on the screen
briefly, press d PLAY to resume playback (from the
scene point).
If you press Z STOP twice or unload the disc,
“Z”(Complete Stop) appears on the screen. The
unit will clear the stopped point.
3.Press d PLAY to confirm.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 30
2015-08-31
5:00:22
Operating
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B OPEN/CLOSE, etc).
yy This function may not work on some disc or
title/track.
Changing subtitle code page
y - Optional
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press m INFO/DISPLAY to
display the On-Screen display.
2.Use WS to select the [Code Page] option.
3.Use AD to select desired code option.
4.Press x BACK to exit the On-Screen display.
2. Select a desired music on the [List] by using the
WS then press MARKER to appears the mark on
the list.
3.Press b ENTER or d PLAY.
Displays the play mode.
4. Select the play mode by using the WS and press
b ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback.
,,Note
If you want to select all files on the list, select
[Select All] and press b ENTER.
To delete a Marker
1.Use WS to select the track that you wish to erase
from the marked file.
ut
2.Press MARKER.
The mark function enables you to store your
favourite files from any disc or USB device in the
unit memory.
To delete all Markers
1. Select [Music] on the [Home Menu].
Returning to the upper folder.
(MP3/ WMA only)
File information will be displayed
according to the ID3TAG information
on the appropriate music file. (MP3
only)
4
Operating
Marked Playback
31
Use WSAD to select [Deselect All] then press b
ENTER in program edit mode.
,,Note
The markers are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
Selecting all tracks/ files.
Deselecting all tracks/files.
Moving to the previous or
next file list.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 31
2015-08-31
5:00:22
32 Operating
Viewing a PHOTO file
About help menu in the full screen
Menu
Buttons
Operation
Menu
m
INFO/
DISPLAY
Displaying the Option
menu.
a/d
Prev./ Next
A/D
Moving to another file.
x
BACK
Returning to the
[Photo] menu.
i
This unit can play discs with photo files.
1. Select [Photo] on the [Home Menu] and press
b ENTER.
Moving to the previous or
next file list.
x
List
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
m INFO/DISPLAY to display the option menu.
4
2. Select an option using WSAD.
Returning to the upper
folder.
Operating
2.Press WS to select a folder, and then press b
ENTER.
3. If you want to view a slide show, press WS to
highlight a file and press d PLAY.
a
About help menu in the [Photo] menu
Menu
Buttons
Operation
d Slide
Show
d PLAY
Viewing a slide
show.
wsad
Move
WSAD
Moving to another
file or content.
b
Select
b ENTER
Viewing a particular
file.
x
Close
x BACK
Returning to the
[Home Menu].
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 32
b
c
d
e
a Current photo/ Total number of photos –
Use AD to view previous/next photo.
b Slide Show d/M– Press  ENTER to start or
pause slide show.
c Speed x3/ x2/ x1 – Use  ENTER to select
a delaying speed between photos in a slide
show.
d Rotate – Press  ENTER to rotate the photo.
e Go to list – Press  ENTER to return [Photo]
list.
2015-08-31
5:00:22
Operating 33
Recording to USB
,,Note
1. Connect the USB device to the unit.
yy You can check the recording percentage
rate for the USB record on the screen during
the recording. (Audio CD or MP3/ WMA CD
only)
2. Select a mode in which you want to record.
Playback a sound source first.
yy During recording MP3/WMA, there is no
sound.
3. Start the recording by pressing X REC.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
You can record music or sound souce to USB device
by connecting in to the port on the unit.
4. To stop recording, press Z STOP.
[All tracks/ files recording]
Record to USB in stop or play mode.
[Program list recording]
After marking desired file(s) and you can record
it to USB (Refer to the page 31).
It’ll be stored as follows.
Audio CD
The other
sources (Tuner,
AUX, Portable)
yy Recording through microphones is not
available
yy If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
yy Multi card reader device or external HDD
can not be used for USB recording.
yy A file is recorded by 128 Mbyte (about 2
hours) when you record for a long term.
There are recorded less than 4 files.
4
Operating
MP3/ WMA
yy Do not remove the USB device or turn off
the unit during USB recording. If does not,
an incomplete file may be made and not
deleted on PC.
yy In the state CD-G, DTS disc USB record is not
operated.
yy The files in the sub-folders are not recorded
during all track recording.
yy You may not record more than 999 files.
yy The numbering of the recording file is
entered from the lowest number. So if you
delete some of the recording files, the next
recording file could be the lowest number
among them.
yy You can not record in AUTO DJ mode.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 33
2015-08-31
5:00:22
34 Operating
Other Operations
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.
4
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold M PAUSE/STEP
for more than five seconds to be able to select a
system in the [Home Menu]. (NTSC
PAL)
,,Note
If the USB device is connected or a disc is
inserted, this function is not operated.
Turn off the sound temporarily
Press MUTE@ on the remote control to mute
your unit.
You can mute your unit, for example, to answer
the telephone, “MUTE” is displayed in the display
window.
To cancel it, press MUTE@ again or change the
volume level.
Operating
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
,,Note
All the LED turns off when Dimmer is being
operated.
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save
current playback status.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 34
2015-08-31
5:00:22
Operating 35
CHILDSAFE Mode
VOCAL FADER
This function helps to prevent you from being
surprised when you turn on the unit in case that
the volume of the unit is set at a high level.
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the VOCAL FADER, and
“FADE ON” will appear in display window.
To turn on CHILDSAFE mode, press and hold
ENTER / SET on the unit when the volume of the
unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold
ENTER / SET on the unit when the volume of the
unit is “MIN”.
,,Note
In case of DVD/CD, USB, BT function or LG TV
Function, CHILDSAFE mode does not work
after about 2 minutes from power on the unit
even if this mode is enabled.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music
files.
,,Note
yy This function is available to use only when a
microphone is connected.
yy It is not available on the MONO source.
Using Microphone
1. Connect your microphone to the MIC jack.
DEMO
,,Note
yy While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will
play back automatically.
3. Sing along with the accompaniment. Adjust the
microphone volume by rotating MIC VOLUME/
CONTROL knob clockwise or counterclockwise
on the unit or by pressing MIC VOL -/+ on the
remote control repeatedly.
4
Operating
In the power off state, it demonstrates the function
on display window and a display by pressing
USB REC / DEMO.
To cancel the DEMO, press it again.
2. Play the music you want.
,,Note
yy When not using the microphone, set the
MIC VOL. to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
yy If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOLUME/CONTROL
on the unit or by pressing MIC VOL - on the
remote control.
yy If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOLUME/CONTROL on
the unit or press MIC VOL - on the remote
control to minimum.
yy You can give an echo effect to the sound
from the microphones by using the ECHO
VOLUME/CONTROL.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 35
2015-08-31
5:00:23
36 Operating
LIGHTING MODE
The function is to create a Club like atmosphere by
operating speaker lighting.
Setting the Clock
1. Turn the unit on.
1.Press LIGHTING on the unit.
2. Press and hold CLOCK on the unit.
3. Select time mode by rotating MIC VOLUME/
CONTROL knob on the unit.
The mode changes each time you press it :
OFF VOLCANO POLICE THUNDER
PSYCHE CAOS OFF
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains its previous mode
when you first press LIGHTING, press again
to change modes.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press CLOCK on the unit to confirm your
selection.
5. Select the hours by rotating MIC VOLUME/
CONTROL knob on the unit.
6.Press CLOCK on the unit
7. Select the minutes by pressing MIC VOLUME/
CONTROL knob on the unit.
8.Press CLOCK or ENTER / SET on the unit.
4
Operating
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 36
2015-08-31
5:00:23
Operating 37
Using your player as an alarm
clock
Auto power down
1. Turn the unit on.
This unit will be off itself to save electric consumption
in the case main unit is not connected to external
device and is not used for 20 minutes. So does
this unit after six hours since Main unit has been
connected to other device using analog input.
2. Press and hold ALARM.
3.Rotate MIC VOLUME/CONTROL knob on the
unit to change the hours and minutes and press
ALARM to save.
4.Rotate MIC VOLUME/CONTROL knob on the
unit to select function and press ALARM to
save.
- Rotate MIC VOLUME/CONTROL knob on the
unit to select a memory No. when you select
Tuner and then, press ALARM.
If there is no memory No., this step is skipped.
5.Rotate MIC VOLUME/CONTROL knob on the
unit to change the volume and press ALARM or
ENTER / SET to save. The clock icon “(” shows
that the alarm is set.
How to disconnect
the wireless network
connection or the
wireless device.
Turn off the unit by pressing the power button for
more than 5 seconds.
,,Note
4
Operating
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the unit is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing ALARM even when
the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM.
yy In case of DVD/CD or USB, this function is
available when you have music file. If you do
not have music file, the function is changed
to Tuner.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 37
2015-08-31
5:00:23
38 Operating
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
LG TV or Bluetooth
This unit recognizes input signals such as
Bluetooth and LG TV and then changes suitable
function automatically.
If you try to connect your Bluetooth device, this
unit turns on and connects your Bluetooth device.
You can play your music.
,,Note
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the
unit turns on but Bluetooth function may
not be connected.
yy If you disconnect Bluetooth connection
by this unit, some Bluetooth devices try to
connect to the unit continually. Therefore
it is recommended to disconnect the
connection before turning off the unit.
4
Operating
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an
input source when this unit is turned off.
yy If you turn off the unit by pressing the
power button for more than 5 seconds, Auto
Power On function is disabled. To activate it,
turn on the unit.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 38
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV signal comes in
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG
TV. You can hear the sound from your TV.
,,Note
yy This unit does not respond to the bluetooth
connection signal while using the LG TV
function.
yy If you using the bluetooth function, this
unit does not respond to LG TV connection
signal.
yy The bluetooth unit or the LG TV which is not
paired with this unit, cannot use the auto
function change.
yy If you change the this unit’s function to
other function, some bluetooth unit may try
to connecting in succession. Disconnect the
bluetooth connection before changing of
the this unit’s function.
2015-08-31
5:00:23
Operating 39
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details
of LG Sound Sync.
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
1. Turn on the unit by pressing 1 (Power) on the
remote control.
2. Select LG TV function by using the
P FUNCTION on the remote control.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window and
then you can see “LG TV” on the display window
if connecting normally between this unit and
your TV.
,,Note
yy If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
4
Operating
yy If the connection fails, check the conditions
of this unit and your TV : power, function.
With wireless connection
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turn off the unit.
-- Changing the function to the others.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy Details of TV setting menu vary depending
on the models of your TV.
yy Bluetooth connection is unavailable after
connecting LG TV.
yy The amount of time to turn off this unit is
different depending on your TV.
yy Bluetooth and LG Sound Sync connection
are unavailable during recording.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 39
2015-08-31
5:00:23
5Troubleshooting
40 Troubleshooting
Troubleshooting
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not work
properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is not plugged in. Plug in the power cord.
No Power.
5
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
No picture
yy Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
No sound.
yy Check whether you select right function.
Press P FUNCTION and check the selected function.
yy Connect the video cables securely to both the TV and unit.
The DVD picture quality yy Clean the disc using a soft cloth with outward strokes.
is poor
Troubleshooting
yy Insert a disc.
A DVD/CD will not play
yy Insert a playable disc (check the disc type, colour system and regional code).
yy Place the disc with the label or printed side facing upwards.
yy Enter your password or change the rating level.
Humming noise heard
while a DVD or CD is
playing
yy Clean the disc using a soft cloth with outward strokes.
yy Move unit further away from your TV.
yy An unplayable disc is inserted. Check the playable disc.
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to page 43)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 40
2015-08-31
5:00:23
Troubleshooting
Problem
41
Cause & Solution
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels).
Preset some radio stations, see page 28 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
yy Check the speaker light effects by pressing LIGHTING.
yy Check whether your LG TV supports LG Sound Sync.
LG Sound Sync does not yy Check connection of LG Sound Sync.
work.
yy Check sound setting of your TV and this unit.
5
The AUTO POWER
function does not work. yy Depending on the connected device, this function may not operate.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 41
2015-08-31
Troubleshooting
yy Check connection of the external device such as TV or Bluetooth device.
5:00:23
6Appendix
42 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
You can
1 (TV POWER)
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
PR/CH W/S
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV
,,Note
6
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Appendix
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 42
2015-08-31
5:00:24
Appendix 43
Maintenance
Notes on Discs
Handling Discs
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Appendix
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 43
6
2015-08-31
5:00:24
44 Appendix
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
Afghanistan 6
AF Fiji FJ Monaco MC Singapore SG
SK
Argentina AR Finland FI Mongolia MN Slovak Republic Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Appendix
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 44
LY Russian
LU Federation Vietnam RU Zimbabwe SA
TH
VN
ZW
SN
2015-08-31
5:00:24
Appendix 45
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Ameharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laothian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 45
2015-08-31
6
Appendix
LanguageCode
5:00:24
46 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Notes on Copyrights
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
6
Appendix
Bluetooth wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 46
2015-08-31
5:00:25
Appendix 47
General specifications
General
Power requirements
Refer to the main label.
Refer to the main label.
Power consumption
Networked standby : 0.4 W
(If all network ports are activated.)
Dimensions (W x H x D)
430 mm x 665 mm x 468 mm
Net Weight (Approx.)
22.7 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
60 %
Bus Power Supply (USB)
5 V 0 500 mA
Inputs / Outputs
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector )
AUX OUT
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
AUX IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
PORT. IN
1.2 Vrms (3.5 Ø jack)
MIC
27 mV
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
CD
6
40 to 20000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
80 dB
Appendix
Frequency Response
Amplifier
Total output (RMS)
1000 W
FRONT (RMS)
500 W x 1 (6 Ω at 150 Hz)
MID (RMS)
500 W x 1 (6 Ω at 1 kHz)
THD
20 %
yy Design and specifications are subject to change without notice.
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 47
2015-08-31
5:00:25
OM7550D-FB.DPHLLLK_FULL BOOK_ENG_MFL68982111.indd 48
2015-08-31
5:00:25
Download PDF

advertising